summaryrefslogtreecommitdiff
path: root/drivers/media/v4l2-core
AgeCommit message (Collapse)AuthorFilesLines
2022-12-14media: v4l2-dv-timings.c: fix too strict blanking sanity checksHans Verkuil1-6/+14
commit 5eef2141776da02772c44ec406d6871a790761ee upstream. Sanity checks were added to verify the v4l2_bt_timings blanking fields in order to avoid integer overflows when userspace passes weird values. But that assumed that userspace would correctly fill in the front porch, backporch and sync values, but sometimes all you know is the total blanking, which is then assigned to just one of these fields. And that can fail with these checks. So instead set a maximum for the total horizontal and vertical blanking and check that each field remains below that. That is still sufficient to avoid integer overflows, but it also allows for more flexibility in how userspace fills in these fields. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Fixes: 4b6d66a45ed3 ("media: v4l2-dv-timings: add sanity checks for blanking values") Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-03media: v4l2-dv-timings: add sanity checks for blanking valuesHans Verkuil1-0/+14
[ Upstream commit 4b6d66a45ed34a15721cb9e11492fa1a24bc83df ] Add sanity checks to v4l2_valid_dv_timings() to ensure that the provided blanking values are reasonable. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Fixes: b18787ed1ce3 ([media] v4l2-dv-timings: add new helper module) Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-03media: v4l2-mem2mem: Apply DST_QUEUE_OFF_BASE on MMAP buffers across ioctlsChen-Yu Tsai1-17/+45
commit 8310ca94075e784bbb06593cd6c068ee6b6e4ca6 upstream. DST_QUEUE_OFF_BASE is applied to offset/mem_offset on MMAP capture buffers only for the VIDIOC_QUERYBUF ioctl, while the userspace fields (including offset/mem_offset) are filled in for VIDIOC_{QUERY,PREPARE,Q,DQ}BUF ioctls. This leads to differences in the values presented to userspace. If userspace attempts to mmap the capture buffer directly using values from DQBUF, it will fail. Move the code that applies the magic offset into a helper, and call that helper from all four ioctl entry points. [hverkuil: drop unnecessary '= 0' in v4l2_m2m_querybuf() for ret] Fixes: 7f98639def42 ("V4L/DVB: add memory-to-memory device helper framework for videobuf") Fixes: 908a0d7c588e ("[media] v4l: mem2mem: port to videobuf2") Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> [OP: adjusted return logic for 4.19] Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-22media: v4l2-dv-timings.c: fix wrong condition in two for-loopsHans Verkuil1-2/+2
[ Upstream commit 4108b3e6db31acc4c68133290bbcc87d4db905c9 ] These for-loops should test against v4l2_dv_timings_presets[i].bt.width, not if i < v4l2_dv_timings_presets[i].bt.width. Luckily nothing ever broke, since the smallest width is still a lot higher than the total number of presets, but it is wrong. The last item in the presets array is all 0, so the for-loop must stop when it reaches that sentinel. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Reported-by: Krzysztof Hałasa <khalasa@piap.pl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-20media: v4l2-core: Avoid the dangling pointer in v4l2_fh_releaseLv Yunlong1-0/+1
[ Upstream commit 7dd0c9e547b6924e18712b6b51aa3cba1896ee2c ] A use after free bug caused by the dangling pointer filp->privitate_data in v4l2_fh_release. See https://lore.kernel.org/patchwork/patch/1419058/. My patch sets the dangling pointer to NULL to provide robust. Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-07media: v4l: ioctl: Fix memory leak in video_usercopySakari Ailus1-12/+7
commit fb18802a338b36f675a388fc03d2aa504a0d0899 upstream. When an IOCTL with argument size larger than 128 that also used array arguments were handled, two memory allocations were made but alas, only the latter one of them was released. This happened because there was only a single local variable to hold such a temporary allocation. Fix this by adding separate variables to hold the pointers to the temporary allocations. Reported-by: Arnd Bergmann <arnd@kernel.org> Reported-by: syzbot+1115e79c8df6472c612b@syzkaller.appspotmail.com Fixes: d14e6d76ebf7 ("[media] v4l: Add multi-planar ioctl handling code") Cc: stable@vger.kernel.org Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-11media: v4l2-mem2mem.c: fix broken linksHans Verkuil1-2/+2
commit 316e730f1d8bb029fe6cec2468fb2a50424485b3 upstream. The topology that v4l2_m2m_register_media_controller() creates for a processing block actually created a source-to-source link and a sink-to-sink link instead of two source-to-sink links. Unfortunately v4l2-compliance never checked for such bad links, so this went unreported for quite some time. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Reported-by: Nicolas Dufresne <nicolas@ndufresne.ca> Cc: <stable@vger.kernel.org> # for v4.19 and up Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-11media: v4l2-core: compat: ignore native command codesArnd Bergmann1-73/+75
commit 4a873f3fa5d6ca52e446d306dd7194dd86a09422 upstream. The do_video_ioctl() compat handler converts the compat command codes into the native ones before processing further, but this causes problems for 32-bit user applications that pass a command code that matches a 64-bit native number, which will then be handled the same way. Specifically, this breaks VIDIOC_DQEVENT_TIME from user space applications with 64-bit time_t, as the structure layout is the same as the native 64-bit layout on many architectures (x86 being the notable exception). Change the handler to use the converted command code only for passing into the native ioctl handler, not for deciding on the conversion, in order to make the compat behavior match the native behavior. Actual support for the 64-bit time_t version of VIDIOC_DQEVENT_TIME and other commands still needs to be added in a separate patch. Cc: stable@vger.kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-11media/v4l2-core: set pages dirty upon releasing DMA buffersJohn Hubbard1-1/+4
commit 3c7470b6f68434acae459482ab920d1e3fabd1c7 upstream. After DMA is complete, and the device and CPU caches are synchronized, it's still required to mark the CPU pages as dirty, if the data was coming from the device. However, this driver was just issuing a bare put_page() call, without any set_page_dirty*() call. Fix the problem, by calling set_page_dirty_lock() if the CPU pages were potentially receiving data from the device. Link: http://lkml.kernel.org/r/20200107224558.2362728-11-jhubbard@nvidia.com Signed-off-by: John Hubbard <jhubbard@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: <stable@vger.kernel.org> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Björn Töpel <bjorn.topel@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Leon Romanovsky <leonro@mellanox.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-29media: v4l2-ioctl.c: zero reserved fields for S/TRY_FMTHans Verkuil1-12/+12
commit ee8951e56c0f960b9621636603a822811cef3158 upstream. v4l2_vbi_format, v4l2_sliced_vbi_format and v4l2_sdr_format have a reserved array at the end that should be zeroed by drivers as per the V4L2 spec. Older drivers often do not do this, so just handle this in the core. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-31media: v4l2-core: fix touch support in v4l_g_fmtVandana BN1-15/+18
[ Upstream commit 545b618cfb5cadacd00c25066b9a36540e5ca9e9 ] v4l_s_fmt, for VFL_TYPE_TOUCH, sets unneeded members of the v4l2_pix_format structure to default values.This was missing in v4l_g_fmt, which would lead to failures in v4l2-compliance tests. Signed-off-by: Vandana BN <bnvandana@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-05media: v4l2-ctrl: fix flags for DO_WHITE_BALANCEEugen Hristev1-0/+1
commit a0816e5088baab82aa738d61a55513114a673c8e upstream. Control DO_WHITE_BALANCE is a button, with read only and execute-on-write flags. Adding this control in the proper list in the fill function. After adding it here, we can see output of v4l2-ctl -L do_white_balance 0x0098090d (button) : flags=write-only, execute-on-write Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-16media: cec/v4l2: move V4L2 specific CEC functions to V4L2Hans Verkuil1-0/+151
[ Upstream commit 9cfd2753f8f3923f89cbb15f940f3aa0e7202d3e ] Several CEC functions are actually specific for use with receivers, i.e. they should be part of the V4L2 subsystem, not CEC. These functions deal with validating and modifying EDIDs for (HDMI) receivers, and they do not actually have anything to do with the CEC subsystem and whether or not CEC is enabled. The problem was that if the CEC_CORE config option was not set, then these functions would become stubs, but that's not right: they should always be valid. So replace the cec_ prefix by v4l2_ and move them to v4l2-dv-timings.c. Update all drivers that call these accordingly. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reported-by: Lars-Peter Clausen <lars@metafoo.de> Cc: <stable@vger.kernel.org> # for v4.17 and up Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26media: v4l2: Test type instead of cfg->type in v4l2_ctrl_new_custom()Boris Brezillon1-5/+4
commit 07d89227a983df957a6a7c56f7c040cde9ac571f upstream. cfg->type can be overridden by v4l2_ctrl_fill() and the new value is stored in the local type var. Fix the tests to use this local var. Fixes: 0996517cf8ea ("V4L/DVB: v4l2: Add new control handling framework") Cc: <stable@vger.kernel.org> Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> [hverkuil-cisco@xs4all.nl: change to !qmenu and !qmenu_int (checkpatch)] Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-27media: v4l2-ctrls.c/uvc: zero v4l2_eventHans Verkuil1-1/+1
commit f45f3f753b0a3d739acda8e311b4f744d82dc52a upstream. Control events can leak kernel memory since they do not fully zero the event. The same code is present in both v4l2-ctrls.c and uvc_ctrl.c, so fix both. It appears that all other event code is properly zeroing the structure, it's these two places. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Reported-by: syzbot+4f021cf3697781dbd9fb@syzkaller.appspotmail.com Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-22media: v4l: ioctl: Validate num_planes for debug messagesSakari Ailus1-1/+3
commit 7fe9f01c04c2673bd6662c35b664f0f91888b96f upstream. The num_planes field in struct v4l2_pix_format_mplane is used in a loop before validating it. As the use is printing a debug message in this case, just cap the value to the maximum allowed. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Cc: stable@vger.kernel.org Reviewed-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Cc: <stable@vger.kernel.org> # for v4.12 and up Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-27media: v4l: event: Add subscription to list before calling "add" operationSakari Ailus1-19/+24
commit 92539d3eda2c090b382699bbb896d4b54e9bdece upstream. Patch ad608fbcf166 changed how events were subscribed to address an issue elsewhere. As a side effect of that change, the "add" callback was called before the event subscription was added to the list of subscribed events, causing the first event queued by the add callback (and possibly other events arriving soon afterwards) to be lost. Fix this by adding the subscription to the list before calling the "add" callback, and clean up afterwards if that fails. Fixes: ad608fbcf166 ("media: v4l: event: Prevent freeing event subscriptions while accessed") Reported-by: Dave Stevenson <dave.stevenson@raspberrypi.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.org> Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com> Tested-by: Hans Verkuil <hans.verkuil@cisco.com> Cc: stable@vger.kernel.org (for 4.14 and up) Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-13media: hdmi.h: rename ADOBE_RGB to OPRGB and ADOBE_YCC to OPYCCHans Verkuil1-2/+2
commit 463659a08d7999d5461fa45b35b17686189a70ca upstream. These names have been renamed in the CTA-861 standard due to trademark issues. Replace them here as well so they are in sync with the standard. Signed-off-by: Hans Verkuil <hansverk@cisco.com> Cc: stable@vger.kernel.org Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-13media: replace ADOBERGB by OPRGBHans Verkuil1-4/+4
commit db0340182444612bcadb98bdec22f651aa42266c upstream. The CTA-861 standards have been updated to refer to opRGB instead of AdobeRGB. The official standard is in fact named opRGB, so switch to that. The two old defines referring to ADOBERGB in the public API are put under #ifndef __KERNEL__ and a comment mentions that they are deprecated. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Cc: stable@vger.kernel.org Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-03media: v4l: event: Prevent freeing event subscriptions while accessedSakari Ailus2-18/+22
The event subscriptions are added to the subscribed event list while holding a spinlock, but that lock is subsequently released while still accessing the subscription object. This makes it possible to unsubscribe the event --- and freeing the subscription object's memory --- while the subscription object is simultaneously accessed. Prevent this by adding a mutex to serialise the event subscription and unsubscription. This also gives a guarantee to the callback ops that the add op has returned before the del op is called. This change also results in making the elems field less special: subscriptions are only added to the event list once they are fully initialised. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: stable@vger.kernel.org # for 4.14 and up Fixes: c3b5b0241f62 ("V4L/DVB: V4L: Events: Add backend") Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-16Merge tag 'media/v4.19-1' of ↵Linus Torvalds7-47/+430
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - new Socionext MN88443x ISDB-S/T demodulator driver: mn88443x - new sensor drivers: ak7375, ov2680 and rj54n1cb0c - an old soc-camera sensor driver converted to the V4L2 framework: mt9v111 - a new Voice-Coil Motor (VCM) driver: dw9807-vcm - some cleanups at cx25821, removing legacy unused code - some improvements at ddbridge driver - new platform driver: vicodec - some DVB API cleanups, removing ioctls and compat code for old out-of-tree drivers that were never merged upstream - improvements at DVB core to support frontents that support both Satellite and non-satellite delivery systems - got rid of the unused VIDIOC_RESERVED V4L2 ioctl - some cleanups/improvements at gl861 ISDB driver - several improvements on ov772x, ov7670 and ov5640, imx274, ov5645, and smiapp sensor drivers - fixes at em28xx to support dual TS devices - some cleanups at V4L2/VB2 locking logic - some API improvements at media controller - some cec core and drivers improvements - some uvcvideo improvements - some improvements at platform drivers: stm32-dcmi, rcar-vin, coda, reneseas-ceu, imx, vsp1, venus, camss - lots of other cleanups and fixes * tag 'media/v4.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (406 commits) Revert "media: vivid: shut up warnings due to a non-trivial logic" siano: get rid of an unused return code for debugfs register media: isp: fix a warning about a wrong struct initializer media: radio-wl1273: fix return code for the polling routine media: s3c-camif: fix return code for the polling routine media: saa7164: fix return codes for the polling routine media: exynos-gsc: fix return code if mutex was interrupted media: mt9v111: Fix build error with no VIDEO_V4L2_SUBDEV_API media: xc4000: get rid of uneeded casts media: drxj: get rid of uneeded casts media: tuner-xc2028: don't use casts for printing sizes media: cleanup fall-through comments media: vivid: shut up warnings due to a non-trivial logic media: rtl28xxu: be sure that it won't go past the array size media: mt9v111: avoid going past the buffer media: vsp1_dl: add a description for cmdpool field media: sta2x11: add a missing parameter description media: v4l2-mem2mem: add descriptions to MC fields media: i2c: fix warning in Aptina MT9V111 media: imx: shut up a false positive warning ...
2018-08-07media: v4l2-mem2mem: add descriptions to MC fieldsMauro Carvalho Chehab1-0/+18
drivers/media/v4l2-core/v4l2-mem2mem.c:90: warning: Function parameter or member 'source_pad' not described in 'v4l2_m2m_dev' drivers/media/v4l2-core/v4l2-mem2mem.c:90: warning: Function parameter or member 'sink' not described in 'v4l2_m2m_dev' drivers/media/v4l2-core/v4l2-mem2mem.c:90: warning: Function parameter or member 'sink_pad' not described in 'v4l2_m2m_dev' drivers/media/v4l2-core/v4l2-mem2mem.c:90: warning: Function parameter or member 'proc' not described in 'v4l2_m2m_dev' drivers/media/v4l2-core/v4l2-mem2mem.c:90: warning: Function parameter or member 'proc_pads' not described in 'v4l2_m2m_dev' drivers/media/v4l2-core/v4l2-mem2mem.c:90: warning: Function parameter or member 'intf_devnode' not described in 'v4l2_m2m_dev' Fixes: be2fff656322 ("media: add helpers for memory-to-memory media controller") Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-02media: v4l: Add new 10-bit packed grayscale formatTodor Tomov1-0/+1
The new format will be called V4L2_PIX_FMT_Y10P. It is similar to the V4L2_PIX_FMT_SBGGR10P family formats but V4L2_PIX_FMT_Y10P is a grayscale format. Signed-off-by: Todor Tomov <todor.tomov@linaro.org> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-02media: doc-rst: Add packed Bayer raw14 pixel formatsSakari Ailus1-0/+4
These formats are compressed 14-bit raw bayer formats with four different pixel orders. They are similar to 10-bit variants. The formats added by this patch are V4L2_PIX_FMT_SBGGR14P V4L2_PIX_FMT_SGBRG14P V4L2_PIX_FMT_SGRBG14P V4L2_PIX_FMT_SRGGB14P Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Todor Tomov <todor.tomov@linaro.org> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-27media: v4l2-mem2mem: Fix missing v4l2_m2m_try_run callEzequiel Garcia1-3/+30
Commit 34dbb848d5e4 ("media: mem2mem: Remove excessive try_run call") removed a redundant call to v4l2_m2m_try_run but instead introduced a bug. Consider the following case: 1) Context A schedules, queues and runs job A. 2) While the m2m device is running, context B schedules and queues job B. Job B cannot run, because it has to wait for job A. 3) Job A completes, calls v4l2_m2m_job_finish, and tries to queue a job for context A, but since the context is empty it won't do anything. In this scenario, queued job B will never run. Fix this by calling v4l2_m2m_try_run from v4l2_m2m_try_schedule. While here, add more documentation to these functions. Fixes: 34dbb848d5e4 ("media: mem2mem: Remove excessive try_run call") Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> [hans.verkuil@cisco.com: split >80 cols line] Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-25media: v4l2-mem2mem: add v4l2_m2m_last_buf()Hans Verkuil1-0/+18
This can be used to mark the last queued source buffer as the last buffer. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-25media: videodev.h: add PIX_FMT_FWHT for use with vicodecHans Verkuil1-0/+1
Add a new pixelformat for the vicodec software codec using the Fast Walsh Hadamard Transform. Signed-off-by: Hans Verkuil <hansverk@cisco.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-25media: mem2mem: Make .job_abort optionalEzequiel Garcia1-3/+3
Implementing job_abort() does not make sense on some drivers. This is not a problem, as the abort is not required to wait for the job to finish. Quite the opposite, drivers are encouraged not to wait. Demote v4l2_m2m_ops.job_abort from required to optional, and clean all drivers with dummy implementations. Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-25media: v4l: Add support for STD ioctls on subdev nodesNiklas Söderlund1-0/+22
There is no way to control the standard of subdevices which are part of a media device. The ioctls which exists all target video devices explicitly and the idea is that the video device should talk to the subdevice. For subdevices part of a media graph this is not possible and the standard must be controlled on the subdev device directly. Add four new ioctls to be able to directly interact with subdevices and control the video standard; VIDIOC_SUBDEV_ENUMSTD, VIDIOC_SUBDEV_G_STD, VIDIOC_SUBDEV_S_STD and VIDIOC_SUBDEV_QUERYSTD. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-24media: v4l2-fwnode: parse 'data-enable-active' propJacopo Mondi1-0/+4
Parse the newly defined 'data-enable-active' property in parallel endpoint parsing function. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-23ACPI: Convert ACPI reference args to generic fwnode reference argsSakari Ailus1-1/+1
Convert all users of struct acpi_reference_args to more generic fwnode_reference_args. This will 1) avoid an ACPI specific references to device nodes with integer arguments as well as 2) allow making references to nodes other than device nodes in ACPI. As a by-product, convert the fwnode interger arguments to u64. The arguments were 64-bit integers on ACPI but the fwnode arguments were just 32-bit. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-07-04media: v4l2-ctrl: Add control for VP9 profileKeiichi Watanabe1-0/+11
Add a new control V4L2_CID_MPEG_VIDEO_VP9_PROFILE for VP9 profiles. This control allows selecting the desired profile for VP9 encoder and querying for supported profiles by VP9 encoder/decoder. Though this control is similar to V4L2_CID_MPEG_VIDEO_VP8_PROFILE, we need to separate this control from it because supported profiles usually differ between VP8 and VP9. Signed-off-by: Keiichi Watanabe <keiichiw@chromium.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-04media: v4l2-ctrl: Change control for VP8 profile to menu controlKeiichi Watanabe1-1/+11
Add a menu control V4L2_CID_MPEG_VIDEO_VP8_PROFILE for VP8 profile and make V4L2_CID_MPEG_VIDEO_VPX_PROFILE an alias of it. This new control is used to select the desired profile for VP8 encoder and query for supported profiles by VP8 encoder/decoder. Though we have originally a control V4L2_CID_MPEG_VIDEO_VPX_PROFILE and its name contains 'VPX', it works only for VP8 because supported profiles usually differ between VP8 and VP9. In addition, this control cannot be used for querying since it is not a menu control but an integer control, which cannot return an arbitrary set of supported profiles. The new control V4L2_CID_MPEG_VIDEO_VP8_PROFILE is a menu control as with controls for other codec profiles. (e.g. H264) In addition, this patch also fixes the use of V4L2_CID_MPEG_VIDEO_VPX_PROFILE in drivers of Qualcomm's venus and Samsung's s5p-mfc. Signed-off-by: Keiichi Watanabe <keiichiw@chromium.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-04media: add helpers for memory-to-memory media controllerEzequiel Garcia2-5/+198
A memory-to-memory pipeline device consists in three entities: two DMA engine and one video processing entities. The DMA engine entities are linked to a V4L interface. This commit add a new v4l2_m2m_{un}register_media_controller API to register this topology. For instance, a typical mem2mem device topology would look like this: Device topology - entity 1: source (1 pad, 1 link) type Node subtype V4L flags 0 pad0: Source -> "proc":1 [ENABLED,IMMUTABLE] - entity 3: proc (2 pads, 2 links) type Node subtype Unknown flags 0 pad0: Source -> "sink":0 [ENABLED,IMMUTABLE] pad1: Sink <- "source":0 [ENABLED,IMMUTABLE] - entity 6: sink (1 pad, 1 link) type Node subtype V4L flags 0 pad0: Sink <- "proc":0 [ENABLED,IMMUTABLE] [hans.verkuil@cisco.com: mark interface links as IMMUTABLE] Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-04media: mark entity-intf links as IMMUTABLEHans Verkuil2-2/+4
Currently links between entities and an interface are just marked as ENABLED. But (at least today) these links cannot be disabled by userspace or the driver, so they should also be marked as IMMUTABLE. It might become possible that drivers can disable such links (if for some reason the device node cannot be used), so we might need to add a new link flag at some point to mark interface links that can be changed by the driver but not by userspace. Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-04media: v4l2-ctrls.c: fix broken auto cluster handlingHans Verkuil1-1/+14
When you switch from auto to manual mode for an auto-cluster (e.g. autogain+gain controls), then the current HW value has to be copied to the current control value. However, has_changed was never set to true, so new_to_cur didn't actually copy this value. Reported-by: Hugues FRUCHET <hugues.fruchet@st.com> Tested-by: Hugues FRUCHET <hugues.fruchet@st.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-04media: v4l2-ioctl.c: use correct vb2_queue lock for m2m devicesHans Verkuil1-2/+54
For m2m devices the vdev->queue lock was always taken instead of the lock for the specific capture or output queue. Now that we pushed the locking down into __video_do_ioctl() we can pick the correct lock and potentially improve the performance of m2m devices. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-06-28media: mem2mem: Remove excessive try_run callEzequiel Garcia1-1/+0
If there is a schedulable job, v4l2_m2m_try_schedule() calls v4l2_m2m_try_run(). This makes the unconditional v4l2_m2m_try_run() called by v4l2_m2m_job_finish superfluous. Remove it. Fixes: 7f98639def42 ("V4L/DVB: add memory-to-memory device helper framework for videobuf") Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-06-28media: v4l2-ioctl: create helper to fill in v4l2_standard for ENUMSTDNiklas Söderlund1-29/+37
Prepare for adding a new IOCTL VIDIOC_SUBDEV_ENUMSTD which would enumerate the standards for a subdevice by breaking out the code which could be shared between the video and subdevice versions of this IOCTL. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> [hans.verkuil@cisco.com: fixed 'sdandard' typos in v4l2-ioctl.h] Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-06-13treewide: Use array_size() in vzalloc()Kees Cook1-1/+1
The vzalloc() function has no 2-factor argument form, so multiplication factors need to be wrapped in array_size(). This patch replaces cases of: vzalloc(a * b) with: vzalloc(array_size(a, b)) as well as handling cases of: vzalloc(a * b * c) with: vzalloc(array3_size(a, b, c)) This does, however, attempt to ignore constant size factors like: vzalloc(4 * 1024) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( vzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | vzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( vzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(u8) * COUNT + COUNT , ...) | vzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | vzalloc( - sizeof(char) * COUNT + COUNT , ...) | vzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( vzalloc( - sizeof(TYPE) * (COUNT_ID) + array_size(COUNT_ID, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT_ID + array_size(COUNT_ID, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT_CONST + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | vzalloc( - sizeof(THING) * (COUNT_ID) + array_size(COUNT_ID, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT_ID + array_size(COUNT_ID, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT_CONST + array_size(COUNT_CONST, sizeof(THING)) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ vzalloc( - SIZE * COUNT + array_size(COUNT, SIZE) , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( vzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( vzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | vzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | vzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | vzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | vzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | vzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( vzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( vzalloc(C1 * C2 * C3, ...) | vzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants. @@ expression E1, E2; constant C1, C2; @@ ( vzalloc(C1 * C2, ...) | vzalloc( - E1 * E2 + array_size(E1, E2) , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-13treewide: Use array_size() in vmalloc()Kees Cook1-1/+1
The vmalloc() function has no 2-factor argument form, so multiplication factors need to be wrapped in array_size(). This patch replaces cases of: vmalloc(a * b) with: vmalloc(array_size(a, b)) as well as handling cases of: vmalloc(a * b * c) with: vmalloc(array3_size(a, b, c)) This does, however, attempt to ignore constant size factors like: vmalloc(4 * 1024) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( vmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | vmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( vmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | vmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | vmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | vmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | vmalloc( - sizeof(u8) * COUNT + COUNT , ...) | vmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | vmalloc( - sizeof(char) * COUNT + COUNT , ...) | vmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( vmalloc( - sizeof(TYPE) * (COUNT_ID) + array_size(COUNT_ID, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * COUNT_ID + array_size(COUNT_ID, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * COUNT_CONST + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | vmalloc( - sizeof(THING) * (COUNT_ID) + array_size(COUNT_ID, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * COUNT_ID + array_size(COUNT_ID, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * COUNT_CONST + array_size(COUNT_CONST, sizeof(THING)) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ vmalloc( - SIZE * COUNT + array_size(COUNT, SIZE) , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( vmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( vmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | vmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | vmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | vmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | vmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | vmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( vmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( vmalloc(C1 * C2 * C3, ...) | vmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants. @@ expression E1, E2; constant C1, C2; @@ ( vmalloc(C1 * C2, ...) | vmalloc( - E1 * E2 + array_size(E1, E2) , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-13treewide: devm_kzalloc() -> devm_kcalloc()Kees Cook1-3/+4
The devm_kzalloc() function has a 2-factor argument form, devm_kcalloc(). This patch replaces cases of: devm_kzalloc(handle, a * b, gfp) with: devm_kcalloc(handle, a * b, gfp) as well as handling cases of: devm_kzalloc(handle, a * b * c, gfp) with: devm_kzalloc(handle, array3_size(a, b, c), gfp) as it's slightly less ugly than: devm_kcalloc(handle, array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: devm_kzalloc(handle, 4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. Some manual whitespace fixes were needed in this patch, as Coccinelle really liked to write "=devm_kcalloc..." instead of "= devm_kcalloc...". The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ expression HANDLE; type TYPE; expression THING, E; @@ ( devm_kzalloc(HANDLE, - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | devm_kzalloc(HANDLE, - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression HANDLE; expression COUNT; typedef u8; typedef __u8; @@ ( devm_kzalloc(HANDLE, - sizeof(u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ expression HANDLE; type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ expression HANDLE; identifier SIZE, COUNT; @@ - devm_kzalloc + devm_kcalloc (HANDLE, - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression HANDLE; expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression HANDLE; expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ expression HANDLE; identifier STRIDE, SIZE, COUNT; @@ ( devm_kzalloc(HANDLE, - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression HANDLE; expression E1, E2, E3; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression HANDLE; expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, sizeof(THING) * C2, ...) | devm_kzalloc(HANDLE, sizeof(TYPE) * C2, ...) | devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, C1 * C2, ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * E2 + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * (E2) + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-13treewide: kmalloc() -> kmalloc_array()Kees Cook1-1/+2
The kmalloc() function has a 2-factor argument form, kmalloc_array(). This patch replaces cases of: kmalloc(a * b, gfp) with: kmalloc_array(a * b, gfp) as well as handling cases of: kmalloc(a * b * c, gfp) with: kmalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kmalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kmalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The tools/ directory was manually excluded, since it has its own implementation of kmalloc(). The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(char) * COUNT + COUNT , ...) | kmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kmalloc + kmalloc_array ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kmalloc(C1 * C2 * C3, ...) | kmalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kmalloc(sizeof(THING) * C2, ...) | kmalloc(sizeof(TYPE) * C2, ...) | kmalloc(C1 * C2 * C3, ...) | kmalloc(C1 * C2, ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - (E1) * E2 + E1, E2 , ...) | - kmalloc + kmalloc_array ( - (E1) * (E2) + E1, E2 , ...) | - kmalloc + kmalloc_array ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-13Convert v4l2 event to struct_sizeMatthew Wilcox1-2/+1
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-05media: v4l2-ioctl.c: fix missing unlock in __video_do_ioctl()Hans Verkuil1-1/+1
If dev_debug was active, then the code could return without unlocking the core mutex. Replace the return with a 'goto unlock' to ensure proper unlocking. Fixes: 73a110623e7b ("v4l2-core: push taking ioctl mutex down to ioctl handler") Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-28media: v4l2-core: push taking ioctl mutex down to ioctl handlerHans Verkuil3-10/+33
The ioctl serialization mutex (vdev->lock or q->lock for vb2 queues) was taken at the highest level in v4l2-dev.c. This prevents more fine-grained locking since at that level we cannot examine the ioctl arguments, we can only do that after video_usercopy is called. So push the locking down to __video_do_ioctl() and subdev_do_ioctl_lock(). This also allows us to make a few functions in v4l2-ioctl.c static and video_usercopy() is no longer exported. The locking scheme is not changed by this patch, just pushed down. Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-28media: Remove depends on HAS_DMA in case of platform dependencyGeert Uytterhoeven1-2/+0
Remove dependencies on HAS_DMA where a Kconfig symbol depends on another symbol that implies HAS_DMA, and, optionally, on "|| COMPILE_TEST". In most cases this other symbol is an architecture or platform specific symbol, or PCI. Generic symbols and drivers without platform dependencies keep their dependencies on HAS_DMA, to prevent compiling subsystems or drivers that cannot work anyway. This simplifies the dependencies, and allows to improve compile-testing. Note: - The various VIDEOBUF*DMA* symbols had to loose their dependencies on HAS_DMA, as they are selected by several individual drivers. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Mark Brown <broonie@kernel.org> Acked-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-28media: v4l2-ioctl: delete unused v4l2_disable_ioctl_lockingHans Verkuil1-2/+0
The last user of this 'feature' was the gspca driver. Now that that driver has been converted to vb2 we can delete this code. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-28media: v4l2-ioctl: clear fields in s_parmHans Verkuil1-1/+16
Zero the reserved capture/output array. Zero the extendedmode (it is never used in drivers). Clear all flags in capture/outputmode except for V4L2_MODE_HIGHQUALITY, as that is the only valid flag. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-11media: v4l2-ioctl: replace IOCTL_INFO_STD with stub functionsSami Tolvanen1-115/+130
This change removes IOCTL_INFO_STD and adds stub functions where needed using the DEFINE_V4L_STUB_FUNC macro. This fixes indirect call mismatches with Control-Flow Integrity, caused by calling standard ioctls using a function pointer that doesn't match the function type. Signed-off-by: Sami Tolvanen <samitolvanen@google.com> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-24 05:49:03 +0300