summaryrefslogtreecommitdiff
path: root/drivers/media/usb
AgeCommit message (Collapse)AuthorFilesLines
2013-02-06[media] em28xx: remove i2cdprintk() messagesFrank Schaefer1-24/+5
We don't report any key/scan codes or errors inside the key polling functions for internal IR RC devices, just in the key handling fucntions. Do the same for external devices. Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-06[media] em28xx-input: remove dead code line from em28xx_get_key_em_haup()Frank Schaefer1-2/+0
Field 'old' of struct IR_i2c is used nowhere in module ir-kbd-i2c. Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-06[media] em28xx: add missing IR RC slave address to the list of known i2c devicesFrank Schaefer1-0/+1
Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-06[media] cx231xx: add a missing break statementDan Carpenter1-0/+1
My static checker complains about the fall through here. From the context it looks like we should add a break statement. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-06[media] drivers/media/usb/dvb-usb/dib0700_core.c: fix left shiftNickolai Zeldovich1-1/+1
Fix bug introduced in 7757ddda6f4febbc52342d82440dd4f7a7d4f14f, where instead of bit-negating the bitmask, the bit position was bit-negated instead. Signed-off-by: Nickolai Zeldovich <nickolai@csail.mit.edu> Cc: Olivier Grenie <olivier.grenie@dibcom.fr> Cc: Patrick Boettcher <patrick.boettcher@dibcom.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-06[media] tm6000: fix G/TRY_FMTHans Verkuil1-6/+3
Two fixes: - the priv field wasn't set to 0. - only V4L2_FIELD_INTERLACED is supported. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-06[media] tm6000: add poll op for radio device nodeHans Verkuil1-0/+1
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-06[media] tm6000: set colorspace fieldHans Verkuil1-0/+2
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-06[media] tm6000: add support for control events and prio handlingHans Verkuil2-8/+25
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-06[media] tm6000: convert to the control frameworkHans Verkuil2-167/+68
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-06[media] tm6000: fix querycap and input/tuner compliance issuesHans Verkuil1-116/+31
- add device_caps support - fix bus_info - fix numerous tuner-related problems due to incorrect tests and setting v4l2_tuner fields to wrong values. - remove (audio) input support from the radio: it doesn't belong there. This also fixed a nasty issue where opening the radio would set dev->input to 5 for no good reason. This was never set back to a valid TV input after closing the radio device, thus leaving it at 5 which is out of bounds of the vinput card array. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-05[media] pwc: Don't return EINVAL when an unsupported pixelformat is requestedHans de Goede1-4/+3
Instead chaneg the passed in format to the pwc default pixelformat. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-05[media] usb/gspca/zc3xx.c: use IS_ENABLED() macroPeter Senna Tschudin1-2/+2
replace: #if defined(CONFIG_INPUT) || \ defined(CONFIG_INPUT_MODULE) with: #if IS_ENABLED(CONFIG_INPUT) This change was made for: CONFIG_INPUT Reported-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-05[media] usb/gspca/xirlink_cit.c: use IS_ENABLED() macroPeter Senna Tschudin1-4/+4
replace: #if defined(CONFIG_INPUT) || \ defined(CONFIG_INPUT_MODULE) with: #if IS_ENABLED(CONFIG_INPUT) This change was made for: CONFIG_INPUT Reported-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-05[media] usb/gspca/t613.c: use IS_ENABLED() macroPeter Senna Tschudin1-3/+3
replace: #if defined(CONFIG_INPUT) || \ defined(CONFIG_INPUT_MODULE) with: #if IS_ENABLED(CONFIG_INPUT) This change was made for: CONFIG_INPUT Reported-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-05[media] usb/gspca/stv06xx/stv06xx.c: use IS_ENABLED() macroPeter Senna Tschudin1-2/+2
replace: #if defined(CONFIG_INPUT) || \ defined(CONFIG_INPUT_MODULE) with: #if IS_ENABLED(CONFIG_INPUT) This change was made for: CONFIG_INPUT Reported-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-05[media] usb/gspca/spca561.c: use IS_ENABLED() macroPeter Senna Tschudin1-3/+3
replace: #if defined(CONFIG_INPUT) || \ defined(CONFIG_INPUT_MODULE) with: #if IS_ENABLED(CONFIG_INPUT) This change was made for: CONFIG_INPUT Reported-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-05[media] usb/gspca/sonixj.c: use IS_ENABLED() macroPeter Senna Tschudin1-2/+2
replace: #if defined(CONFIG_INPUT) || \ defined(CONFIG_INPUT_MODULE) with: #if IS_ENABLED(CONFIG_INPUT) This change was made for: CONFIG_INPUT Reported-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-05[media] usb/gspca/sonixb.c: use IS_ENABLED() macroPeter Senna Tschudin1-3/+3
replace: #if defined(CONFIG_INPUT) || \ defined(CONFIG_INPUT_MODULE) with: #if IS_ENABLED(CONFIG_INPUT) This change was made for: CONFIG_INPUT Also replaced: #if !defined CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE with: #if !IS_ENABLED(CONFIG_USB_SN9C102) Reported-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-05[media] usb/gspca/sn9c20x.c: use IS_ENABLED() macroPeter Senna Tschudin1-2/+2
replace: #if defined(CONFIG_INPUT) || \ defined(CONFIG_INPUT_MODULE) with: #if IS_ENABLED(CONFIG_INPUT) This change was made for: CONFIG_INPUT Reported-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-05[media] usb/gspca/se401.c: use IS_ENABLED() macroPeter Senna Tschudin1-2/+2
replace: #if defined(CONFIG_INPUT) || \ defined(CONFIG_INPUT_MODULE) with: #if IS_ENABLED(CONFIG_INPUT) This change was made for: CONFIG_INPUT Reported-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-05[media] usb/gspca/pac7311.c: use IS_ENABLED() macroPeter Senna Tschudin1-2/+2
replace: #if defined(CONFIG_INPUT) || \ defined(CONFIG_INPUT_MODULE) with: #if IS_ENABLED(CONFIG_INPUT) This change was made for: CONFIG_INPUT Reported-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-05[media] gspca/pac7302.c: use IS_ENABLED() macroPeter Senna Tschudin1-2/+2
replace: #if defined(CONFIG_INPUT) || \ defined(CONFIG_INPUT_MODULE) with: #if IS_ENABLED(CONFIG_INPUT) This change was made for: CONFIG_INPUT Reported-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-05[media] usb/gspca/pac207.c: use IS_ENABLED() macroPeter Senna Tschudin1-2/+2
replace: #if defined(CONFIG_INPUT) || \ defined(CONFIG_INPUT_MODULE) with: #if IS_ENABLED(CONFIG_INPUT) This change was made for: CONFIG_INPUT Reported-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-05[media] usb/gspca/ov519.c: use IS_ENABLED() macroPeter Senna Tschudin1-3/+3
replace: #if defined(CONFIG_INPUT) || \ defined(CONFIG_INPUT_MODULE) with: #if IS_ENABLED(CONFIG_INPUT) This change was made for: CONFIG_INPUT Reported-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-05[media] usb/gspca/konica.c: use IS_ENABLED() macroPeter Senna Tschudin1-3/+3
replace: #if defined(CONFIG_INPUT) || \ defined(CONFIG_INPUT_MODULE) with: #if IS_ENABLED(CONFIG_INPUT) This change was made for: CONFIG_INPUT Reported-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-05[media] usb/gspca: use IS_ENABLED() macroPeter Senna Tschudin2-8/+8
replace: #if defined(CONFIG_INPUT) || \ defined(CONFIG_INPUT_MODULE) with: #if IS_ENABLED(CONFIG_INPUT) This change was made for: CONFIG_INPUT Reported-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-05[media] usb/gspca/cpia1.c: use IS_ENABLED() macroPeter Senna Tschudin1-3/+3
replace: #if defined(CONFIG_INPUT) || \ defined(CONFIG_INPUT_MODULE) with: #if IS_ENABLED(CONFIG_INPUT) This change was made for: CONFIG_INPUT Reported-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-05[media] uvcvideo: Fix race of open and suspend in error caseOliver Neukum1-1/+1
Ming Lei reported: IMO, there is a minor fault in the error handling path of uvc_status_start() inside uvc_v4l2_open(), and the 'users' count should have been decreased before usb_autopm_put_interface(). In theory, a [URB resubmission] warning can be triggered when the device is opened just between usb_autopm_put_interface() and atomic_dec(&stream->dev->users). The fix is trivial. Reported-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-05[media] uvcvideo: Replace memcpy with struct assignmentEzequiel Garcia2-4/+4
This kind of memcpy() is error-prone. Its replacement with a struct assignment is prefered because it's type-safe and much easier to read. Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-01-26Merge 3.8-rc5 into driver-core-nextGreg Kroah-Hartman5-10/+15
This resolves a gpio driver merge issue pointed out in linux-next. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-25Merge branch 'v4l_for_linus' into staging/for_v3.9Mauro Carvalho Chehab5-27/+21
* v4l_for_linus: (464 commits) [media] uvcvideo: Set error_idx properly for S_EXT_CTRLS failures [media] uvcvideo: Cleanup leftovers of partial revert [media] uvcvideo: Return -EACCES when trying to set a read-only control Linux 3.8-rc3 mm: reinstante dropped pmd_trans_splitting() check cred: Remove tgcred pointer from struct cred drm/ttm: fix fence locking in ttm_buffer_object_transfer ARM: clps711x: Fix bad merge of clockevents setup ARM: highbank: save and restore L2 cache and GIC on suspend ARM: highbank: add a power request clear ARM: highbank: fix secondary boot and hotplug ARM: highbank: fix typos with hignbank in power request functions ARM: dts: fix highbank cpu mpidr values ARM: dts: add device_type prop to cpu nodes on Calxeda platforms drm/prime: drop reference on imported dma-buf come from gem xen/netfront: improve truesize tracking ARM: mx5: Fix MX53 flexcan2 clock ARM: OMAP2+: am33xx-hwmod: Fix wrongly terminated am33xx_usbss_mpu_irqs array sctp: fix Kconfig bug in default cookie hmac selection EDAC: Cleanup device deregistering path ... Conflicts: drivers/media/pci/dm1105/dm1105.c drivers/media/platform/soc_camera/mx2_camera.c
2013-01-22drivers/media: remove depends on CONFIG_EXPERIMENTALKees Cook1-1/+1
The CONFIG_EXPERIMENTAL config item has not carried much meaning for a while now and is almost always enabled by default. As agreed during the Linux kernel summit, remove it from any "depends on" lines in Kconfigs. CC: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-11drivers/media/video/pvrusb2: remove depends on CONFIG_EXPERIMENTALKees Cook1-4/+4
The CONFIG_EXPERIMENTAL config item has not carried much meaning for a while now and is almost always enabled by default. As agreed during the Linux kernel summit, remove it from any "depends on" lines in Kconfigs. CC: Mike Isely <isely@pobox.com> CC: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Acked-By: Mike Isely <isely@pobox.com>
2013-01-11[media] uvcvideo: Set error_idx properly for S_EXT_CTRLS failuresLaurent Pinchart1-1/+2
The uvc_set_ctrl() calls don't write to the hardware. A failure at that point thus leaves the device in a clean state, with no control modified. Set the error_idx field to the count value to reflect that, as per the V4L2 specification. TRY_EXT_CTRLS is unchanged and the error_idx field must always be set to the failed control index in that case. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-01-11[media] uvcvideo: Cleanup leftovers of partial revertLaurent Pinchart1-5/+2
Commit ba68c8530a263dc4de440fa10bb20a1c5b9d4ff5 (Partly revert "[media] uvcvideo: Set error_idx properly for extended controls API failures") missed two modifications. Clean them up. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-01-11[media] uvcvideo: Return -EACCES when trying to set a read-only controlLaurent Pinchart1-1/+3
Commit ba68c8530a263dc4de440fa10bb20a1c5b9d4ff5 (Partly revert "[media] uvcvideo: Set error_idx properly for extended controls API failures") also reverted part of commit 30ecb936cbcd83e3735625ac63e1b4466546f5fe ("uvcvideo: Return -EACCES when trying to access a read/write-only control") by mistake. Fix it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-01-11Merge tag 'v3.8-rc3' into v4l_for_linusMauro Carvalho Chehab5-26/+20
Linux 3.8-rc3 * tag 'v3.8-rc3': (11110 commits) Linux 3.8-rc3 mm: reinstante dropped pmd_trans_splitting() check cred: Remove tgcred pointer from struct cred drm/ttm: fix fence locking in ttm_buffer_object_transfer ARM: clps711x: Fix bad merge of clockevents setup ARM: highbank: save and restore L2 cache and GIC on suspend ARM: highbank: add a power request clear ARM: highbank: fix secondary boot and hotplug ARM: highbank: fix typos with hignbank in power request functions ARM: dts: fix highbank cpu mpidr values ARM: dts: add device_type prop to cpu nodes on Calxeda platforms drm/prime: drop reference on imported dma-buf come from gem xen/netfront: improve truesize tracking ARM: mx5: Fix MX53 flexcan2 clock ARM: OMAP2+: am33xx-hwmod: Fix wrongly terminated am33xx_usbss_mpu_irqs array sctp: fix Kconfig bug in default cookie hmac selection EDAC: Cleanup device deregistering path EDAC: Fix EDAC Kconfig menu EDAC: Fix kernel panic on module unloading ALSA: hda - add mute LED for HP Pavilion 17 (Realtek codec) ...
2013-01-06[media] em28xx: fix audio input for TV mode of device Terratec Cinergy 250Frank Schaefer1-1/+1
Remy Blank reported that audio over USB can be made working for the television input if .amux is changed from EM28XX_AMUX_LINE_IN to EM28XX_AMUX_VIDEO. An examination of his devices shows, that it is indeed supplied with an EM202 AC97 audio IC. We also use this setting for the Cinergy 200. Remy Blank also provided the original version of this patch (many thanks !). Fixes bug 14126 (see bug report for further device details). Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com> Signed-off-by: Remy Blank <remy.blank@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-01-06[media] dib0700: do not lock interruptible on tear-down pathsJiri Slaby1-4/+1
When mutex_lock_interruptible is used on paths where a signal can be pending, the device is not closed properly and cannot be reused. This usually happens when you start tzap for example and send it a TERM signal. The signal is pending while tear-down routines are called. Hence streaming is not properly stopped in that case. And the device stops working from that moment on. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-01-06[media] rtl28xxu: correct some device namesAntti Palosaari1-4/+4
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-01-06[media] rtl28xxu: add Gigabyte U7300 DVB-T DongleAlexander Inyukhin1-0/+2
Device with ID 1b80:d393 is the Gigabyte U7300 DVB-T dongle. It contains decoder Realtek RTL2832U and tuner Fitipower FC0012. [crope@iki.fi: fix trivial merge conflict] Signed-off-by: Alexander Inyukhin <shurick@sectorb.msk.ru> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-01-06[media] rtl28xxu: [1b80:d3a8] ASUS My Cinema-U3100Mini Plus V2Antti Palosaari1-0/+2
RF-tuner is Fitipower FC0013 Reported-by: Renato Gallo <renatogallo@unixproducts.com> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-01-06[media] dvb_usb_v2: use IS_ENABLED() macroAntti Palosaari7-8/+8
replace: #if defined(CONFIG_RC_CORE) || defined(CONFIG_RC_CORE_MODULE) with: #if IS_ENABLED(CONFIG_RC_CORE) Reported-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-01-06[media] dvb_usb_v2: change rc polling active/deactive logicAntti Palosaari2-4/+9
Use own flag to mark when rc polling is active/deactive and make decisions, like start/stop polling on suspend/resume, against that. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-01-06[media] dvb_usb_v2: use dummy function defines instead stub functionsAntti Palosaari1-9/+2
I think it is better (cheaper) to use dummy defines for functions that has no meaning when remote controller is disabled by Kconfig. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-01-06[media] dvb_usb_v2: remove rc-core stub implementationsAntti Palosaari1-9/+0
Those are not needed anymore as all dvb-usb-v2 drivers has proper dependency checks for RC-core. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-01-06[media] it913x: remove unused define and increase module versionAntti Palosaari1-2/+1
Signed-off-by: Antti Palosaari <crope@iki.fi> Acked-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-01-06[media] it913x: make remote controller optionalAntti Palosaari1-16/+20
Do not compile remote controller when RC-core is disabled by Kconfig. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-01-06[media] az6007: make remote controller optionalAntti Palosaari1-11/+15
Do not compile remote controller when RC-core is disabled by Kconfig. Signed-off-by: Antti Palosaari <crope@iki.fi> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-03 08:43:44 +0300