summaryrefslogtreecommitdiff
path: root/drivers/media/usb
AgeCommit message (Collapse)AuthorFilesLines
2013-03-05[media] cx231xx: fix gpio big-endian problemsHans Verkuil2-37/+38
Tested on my big-endian ppc-based test machine. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-05[media] cx231xx: fix big-endian problemsHans Verkuil5-16/+16
Tested on my big-endian ppc-based test machine. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-05[media] cx231xx: don't use port 3 on the Conexant video grabberHans Verkuil1-0/+1
It's not working reliably if port 3 is enabled. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-05[media] cx231xx: don't reset width/height on first openHans Verkuil1-3/+0
The last set width/height must be preserved as per the spec. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-05[media] cx231xx: disable 417 support from the Conexant video grabberHans Verkuil1-1/+4
The 417 support doesn't work. Until someone can dig into this driver to figure out why it isn't working the 417 support is disabled. Sometimes you can actually stream a bit, but very soon the whole machine crashes, so something is seriously wrong. For the record, this was not introduced by my recent changes to this driver, it was broken before that. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-05[media] cx231xx: remove bogus driver prefix in log messagesHans Verkuil1-14/+11
The prefix is generated automatically, so no need to provide it again. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-05[media] cx231xx-417: convert to the control frameworkHans Verkuil2-129/+86
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-05[media] cx231xx-417: share ioctls with cx231xx-videoHans Verkuil3-114/+68
Share tuner, frequency, debug and input ioctls with cx231xx-video. These are all shared resources, so no need to implement them again. [mchehab@redhat.com: Fix merge conflict and a checkpatch issue] Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-05[media] cx231xx-417: checkpatch cleanupsHans Verkuil1-372/+360
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-05[media] cx231xx-417: fix g/try_fmt compliance problemsHans Verkuil1-15/+19
Colorspace, field and priv were not set, and sizeimage was calculated using the wrong values (dev->ts1.ts_packet_size and dev->ts1.ts_packet_count can be 0 at module load). Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-05[media] cx231xx-417: use one querycap for all device nodesHans Verkuil3-22/+6
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-05[media] cx231xx-417: remove empty functionsHans Verkuil1-67/+1
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-05[media] cx231xx: improve std handlingHans Verkuil1-11/+13
Set the initial standard of subdevices instead of leaving it undefined. Also update the width and height when a new standard is chosen and return -EBUSY when attempting to change the standard while videobuf is busy. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-05[media] cx231xx: get rid of a bunch of unused cx231xx_fh fieldsHans Verkuil2-22/+2
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-05[media] cx231xx: replace ioctl by unlocked_ioctlHans Verkuil2-10/+7
There was already a core lock, so why wasn't ioctl already replaced by unlock_ioctl? This patch switches to unlocked_ioctl. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-05[media] cx231xx: remove current_norm usageHans Verkuil2-3/+1
The use of this field is deprecated since it will not work when multiple device nodes reference the same video input (the video and vbi nodes in this case). The norm field should be a device-global value. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-05[media] cx231xx: add struct v4l2_fh to get prio and event supportHans Verkuil2-5/+28
Required to resolve v4l2-compliance failures. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-05[media] cx231xx: convert to the control frameworkHans Verkuil4-236/+27
This is needed to resolve the v4l2-compliance complaints about the control ioctls. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-05[media] cx231xx: fix vbi compliance issuesHans Verkuil1-50/+17
Various v4l2-compliance fixes: remove unused sliced VBI functions, zero the reserved fields of struct v4l2_vbi_format and implement the missing s_fmt_vbi_cap. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-05[media] cx231xx: fix frequency clampingHans Verkuil1-9/+2
Let the tuner clamp the frequency and store that clamped value. This fixes a v4l2_compliance failure. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-05[media] cx231xx: zero priv field and use right width in try_fmtHans Verkuil1-1/+3
The priv field of v4l2_pix_format must be zeroed. Also fix a bug in try_fmt where the current width was used instead of the width passed to try_fmt. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-05[media] cx231xx: fix tuner compliance issuesHans Verkuil2-1/+5
The g_tuner call wasn't passed on to the subdevices, g_frequency didn't check for invalid tuners and a low-level function that was expected to return 0 or a negative error returned a positive number instead, causing s_frequency to return bogus errors. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-05[media] cx231xx: remove broken audio input support from the driverHans Verkuil1-44/+8
The audio selection code is broken. Audio and video indices were mixed up and s_audio would reject changing the audio input to something else anyway, so what's the point? All the audio input code has been removed. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-05[media] cx231xx: clean up radio supportHans Verkuil1-61/+18
Radio should not use video or audio inputs. In addition, fix a bug in radio_g_tuner where s_tuner was called in the tuner subdev instead of g_tuner. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-05[media] cx231xx: add required VIDIOC_DBG_G_CHIP_IDENT supportHans Verkuil1-0/+14
This fixes a v4l2_compliance failure. [mchehab@redhat.com: CodingStyle fixes] Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-05[media] cx231xx: add device_caps support to QUERYCAPHans Verkuil1-6/+10
This fixes a v4l2_compliance failure. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-05[media] tlg2300: Remove logs() macroHans Verkuil2-30/+2
ioctl debugging can now be done through the debug parameter in sysfs. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Huang Shijie <shijie8@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-05[media] tlg2300: allow multiple opensHans Verkuil2-26/+15
Due to a poor administration of the driver state it wasn't possible to open a video or vbi device multiple times. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Huang Shijie <shijie8@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-05[media] tlg2300: remove empty vidioc_try_fmt_vid_cap, add missing g_stdHans Verkuil1-7/+9
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Huang Shijie <shijie8@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-05[media] tlg2300: implement the control frameworkHans Verkuil2-88/+41
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Huang Shijie <shijie8@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-05[media] tlg2300: fix missing audiosetHans Verkuil1-1/+1
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Huang Shijie <shijie8@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-05[media] tlg2300: fix frequency handlingHans Verkuil2-10/+14
The usual set of problems: the frequency isn't clamped to the frequency range, no tuner index check and the frequency isn't initialized properly on module load. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Huang Shijie <shijie8@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-05[media] tlg2300: fix querycapHans Verkuil1-4/+10
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Huang Shijie <shijie8@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-05[media] tlg2300: embed video_deviceHans Verkuil2-48/+13
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Huang Shijie <shijie8@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-05[media] tlg2300: add missing video_unregister_deviceHans Verkuil1-0/+1
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Huang Shijie <shijie8@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-05[media] tlg2300: fix radio querycapHans Verkuil1-1/+6
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Huang Shijie <shijie8@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-05[media] tlg2300: switch to v4l2_fhHans Verkuil3-18/+21
This switch to v4l2_fh resolves the last v4l2_compliance issues with respect to control events and priority handling. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Huang Shijie <shijie8@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-05[media] tlg2300: add control handler for radio device nodeHans Verkuil2-86/+28
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Huang Shijie <shijie8@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-05[media] tlg2300: embed video_device instead of allocating itHans Verkuil2-15/+7
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Huang Shijie <shijie8@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-05[media] tlg2300: remove ioctls that are invalid for radio devicesHans Verkuil1-27/+0
The input and audio ioctls are only valid for video/vbi nodes. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Huang Shijie <shijie8@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-05[media] tlg2300: switch to unlocked_ioctlHans Verkuil1-1/+1
The driver already does locking, so it is safe to switch to unlocked_ioctl. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Huang Shijie <shijie8@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-05[media] tlg2300: fix tuner and frequency handling of the radio deviceHans Verkuil1-16/+21
This driver now passes the tuner and frequency tests of v4l2-compliance. It's the usual bugs: frequency wasn't clamped to the valid frequency range, incorrect tuner capabilities and tuner fields not filled in, missing test for invalid tuner index, no initial frequency and incorrect error handling. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Huang Shijie <shijie8@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-05[media] tlg2300: use correct device parentHans Verkuil1-9/+4
Set the correct parent for v4l2_device_register and don't set the name anymore (that's now deduced from the parent). Also remove an unnecessary forward reference and fix two weird looking log messages. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-04[media] em28xx: enable tveeprom for device Hauppauge HVR-930CFrank Schaefer1-0/+1
Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-04[media] em28xx-dvb: Don't put device in suspend mode at feed stopMauro Carvalho Chehab1-2/+0
Putting em28xx in suspend mode when a feed stops is just plain wrong. Every time a new PES filter is changed, the DVB demux code will stop the current feed, and then start a new one. If are there any code that switches off the frontend, via some GPIO setting, this would make the DVB fail. This condition was actually trigged with one device, during DVB scan, as, during scan, it is common that userspace apps to change the filter several times, in order to get all tables. Also, this is not needed at all, since the em28xx code already hooks into ops.ts_bus_ctrl(). This warrants that em28xx can check there if DVB frontend is in usage or not. The code there already puts the device on suspend mode, if the DVB frontend is not used (closed). Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-04[media] cx231xx: Improve signal reception for PV SBTVDMauro Carvalho Chehab1-2/+2
Instead of using 3.3 MHz IF, use 4MHz. That's the standard value for the demod, and, while it can be adjusted, 3.3 MHz is out of the recommended range. So, let's stick with the default. With regards to the IF voltage level, instead of using 0.5 V(p-p) for IF, use 2V, giving a 12dB gain. The rationale is that, on PixelView SBTVD Hybrid, even 2V(p-p) would be in the nominal range for IF, as the maximum range on this particular device is 3V. A higher gain here should help to improve reception under weak signals. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-04[media] em28xx: extract the device configuration dataset from eeproms with ↵Frank Schaefer2-36/+85
16 bit address width The new eeproms with 16 address width still have the the device config dataset (the content of the old 8 bit eeproms) embedded. Hauppauge also continues to include the tveeprom data structure inside this dataset in their devices. The start address of the dataset depends on the start address of the microcode and a variable additional offset. It should be mentioned that Camera devices seem to use a different dataset type, which is not yet supported. Tested with devices "Hauppauge HVR-930C". I've also checked the USB-log from the "MSI Digivox ATSC" and it works the same way. Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-04[media] em28xx: do not store eeprom content permanentlyFrank Schaefer3-15/+31
We currently reserve an array of 256 bytes for the eeprom content in the device struct. For eeproms with 16 bit address width it might even be necessary to increase the buffer size further. Having such a big chunk of memory reserved even if the device has no eeprom and keeping it after it has already been processed seems to be a waste of memory. Change the code to allocate + free the eeprom memory dynamically. This also makes it possible to handle different dataset sizes depending on what is stored/found in the eeprom. Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-04[media] em28xx: add helper function for reading data blocks from i2c clientsFrank Schaefer1-28/+46
Add a helper function for reading data blocks from i2c devices with 8 or 16 bit address width and 8 bit register width. This allows us to reduce the size of new code added by the following patches. Works only for devices with activated register auto incrementation. Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-04[media] em28xx: add basic support for eeproms with 16 bit address widthFrank Schaefer3-25/+49
Newer devices (em2874, em2884, em28174, em25xx, em27[6,7,8]x) use eeproms with 16 bit instead of 8 bit address width. The used eeprom type depends on the chip type, which makes sure eeproms can't be damaged. This patch adds basic support for 16 bit eeproms only, which includes - reading the content - calculating the eeprom hash - displaying the content The eeprom content uses a different format, for which support will be added with subsequent patches. Tested with the "Hauppauge HVR-930C" and the "Speedlink VAD Laplace webcam" (with additional experimental patches). Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-02 08:51:29 +0300