summaryrefslogtreecommitdiff
path: root/drivers/media/usb/dvb-usb-v2/af9035.c
AgeCommit message (Collapse)AuthorFilesLines
2015-05-30[media] af9035: add USB ID 07ca:0337 AVerMedia HD Volar (A867)Antti Palosaari1-0/+2
It is AF9035 + MxL5007T. Driver reports: prechip_version=00 chip_version=03 chip_type=3802 Not sure if that USB ID is reserved only for HP brand or if it is common, but the stick I have is branded as HP part no. 580715-001 rmn A867. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-18[media] af9035: bind tua9001 using I2C bindingAntti Palosaari1-9/+17
Change tua9001 driver from media binding to I2C client binding. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-18[media] af9035: fix device order in ID listAntti Palosaari1-3/+5
Driver supports multiple chipset versions. Devices are ordered to ID table per used chipset type. "ITE 9303 Generic" device uses IT9303 chipset and was added mistakenly between IT9135 IDs. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-18[media] af9035: bind fc2580 using I2C bindingAntti Palosaari1-8/+13
Change fc2580 driver from media binding to I2C client binding. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-12[media] si2157: support selection of IF interfaceOlli Salonen1-0/+1
The chips supported by the si2157 driver have two IF outputs (either pins 12+13 or pins 9+11). Instead of hardcoding the output to be used add an option to choose which output shall be used. As this patch changes the default behaviour, the IF interface is specified in each driver currently using si2157 driver. This is to keep bisectability. Signed-off-by: Olli Salonen <olli.salonen@iki.fi> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-21[media] af9035: initialize si2168_config structOlli Salonen1-0/+1
When new parameters are added for si2168 driver, the parameters have to be explicitly defined for each device if the si2168_config struct is not initialized to all zeros. Signed-off-by: Olli Salonen <olli.salonen@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-21[media] af9035: make sure loading modules is constKees Cook1-3/+3
Make sure that loaded modules are const char strings so we don't load arbitrary modules in the future, nor allow for format string leaks in the module request call. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-24[media] af9035: Add support for IT930x USB bridgeOlli Salonen1-17/+307
Add support for IT930x USB bridge and IT9303 reference design. It is a DVB-T/T2/C tuner with the following components: - IT9303 USB bridge - Si2168-B40 demodulator - Si2147-A30 tuner The IT9303 requires firmware that can be downloaded here: http://trsqr.net/olli/linux/firmwares/it930x/ The Si2168-B40 requires firmware, but the one that is used by PCTV 292e can be used. http://palosaari.fi/linux/v4l-dvb/firmware/Si2168/Si2168-B40/ The Si2147-A30 tuner does not require firmware loading. Signed-off-by: Olli Salonen <olli.salonen@iki.fi> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-24[media] af9035: Add possibility to define which I2C adapter to useOlli Salonen1-5/+4
Some I2C tuner drivers require that the I2C device of the tuner is added to the I2C adapter of the demodulator (Si2168+Si2157 for example). Add possibility to tell af9035_add_i2c_dev which I2C adapter should be used. Signed-off-by: Olli Salonen <olli.salonen@iki.fi> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-22[media] af9035: remove I2C client differentlyAntti Palosaari1-26/+67
It crash kernel when device was removed while it was streaming. That is because we removed driver and frontend thread was still running. Use new callback which allows I2C driver removal just after frontend is unregistered. V2: fixed by reported by Daniel Reported-by: Daniel Glöckner <daniel-gl@gmx.net> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-22[media] af9035: replace PCTV device model numbers with nameAntti Palosaari1-2/+2
Use device names for recent PCTV Systems devices: PCTV AndroiDTV (78e) PCTV microStick (79e) Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-22[media] af9033: remove I2C addr from configAntti Palosaari1-15/+14
I2C driver address is passed as a i2c_new_device() parameter when device is created. Thus no need to keep it in config struct. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-22[media] af9035: few small I2C master xfer changesAntti Palosaari1-23/+14
Biggest problem of that function is complexity. Try reduce complexity: * define macros to detect all 3 supported xfers * remove duplicate message maximum size checks Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-22[media] af9033: convert to I2C clientAntti Palosaari1-9/+41
Convert driver to kernel I2C model. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-22[media] it913x: re-implement sleepAntti Palosaari1-0/+14
Re-implement sleep. Based USB sniffs taken from the latest Hauppauge windows driver version 07/10/2014, 14.6.23.32191. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-22[media] it913x: convert to I2C driverAntti Palosaari1-3/+129
Change the it913x driver to use the I2C high lever tuner binding model. As af9035 depends on it, add a code there to do the binding. [mchehab@osg.samsung.com: Merge 3 patches into one, because we don't want to break bisect due to the conversion] Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-22[media] af9035: make checkpatch.pl happyAntti Palosaari1-1/+7
Correct issues reported by checkpatch.pl. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-22[media] af9035: remove AVerMedia eeprom overrideAntti Palosaari1-19/+0
Reverts commit 3ab25123373270152a9fae98e3c48ef1b2a878c0 [media] af9035: override tuner for AVerMedia A835B devices Original commit itself is correct, but it was replaced by more general solution (commit 1cbbf90d0406913ad4b44194b07f4f41bde84e54). This old solution was committed by a accident and is not needed anymore. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-22[media] af9035: enable AF9033 demod clock source for IT9135Antti Palosaari1-3/+6
Integrated RF tuner of IT9135 is connected to demod clock source named dyn0_clk. Enable that clock source in order to provide stable clock early enough. Cc: Bimow Chen <Bimow.Chen@ite.com.tw> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-04[media] af9035: new IDs: add support for PCTV 78e and PCTV 79eMalcolm Priestley1-0/+4
add the following IDs USB_PID_PCTV_78E (0x025a) for PCTV 78e USB_PID_PCTV_79E (0x0262) for PCTV 79e For these it9135 devices. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Cc: Antti Palosaari <crope@iki.fi> Cc: <stable@vger.kernel.org> # v3.14+ Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-26[media] af9035: override tuner for AVerMedia A835B devicesAntti Palosaari1-0/+19
Tuner ID set into EEPROM is wrong, which causes driver to select wrong tuner profile. That leads device non-working. Fix issue by overriding known bad tuner IDs with suitable default value. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-24[media] rc-core: document the protocol typeDavid Härdeman1-4/+5
Right now the protocol information is not preserved, rc-core gets handed a scancode but has no idea which protocol it corresponds to. This patch (which required reading through the source/keymap for all drivers, not fun) makes the protocol information explicit which is important documentation and makes it easier to e.g. support multiple protocols with one decoder (think rc5 and rc-streamzap). The information isn't used yet so there should be no functional changes. [m.chehab@samsung.com: rebased, added cxusb and removed bad whitespacing] Signed-off-by: David Härdeman <david@hardeman.nu> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-04[media] af9035: override tuner id when bad value set into eepromAntti Palosaari1-7/+33
Tuner ID set into EEPROM is wrong in some cases, which causes driver to select wrong tuner profile. That leads device non-working. Fix issue by overriding known bad tuner IDs with suitable default value. Thanks to MX-NET Telekomunikace s.r.o. for providing non-working DTV stick, that I could fix the bug! Cc: stable@vger.kernel.org # v3.15+ Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-15[media] af9033: Don't export functions for the hardware filterMauro Carvalho Chehab1-3/+7
Exporting functions for hardware filter is a bad idea, as it breaks compilation if: CONFIG_DVB_USB_AF9035=y CONFIG_DVB_AF9033=m Because the PID filter function calls would be hardcoded at af9035. The same doesn't happen with af9033_attach() because the dvb_attach() doesn't hardcode it. Instead, it dynamically links it at runtime. However, calling dvb_attach() multiple times is problematic, as it increments module kref. So, the better is to pass one parameter for the af9033 module to fill the hardware filters, and then use it inside af9035. Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-15[media] af9035: use af9033 PID filtersAntti Palosaari1-51/+10
PID filters are property of af9033 demod. Use PID filters from af9033 driver as it provides those now. Allow possible dual mode on USB 1.1 mode too as bandwidth could be just enough when filters are used on both frontends. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-02-24[media] af9035: use default i2c slave address for af9035 tooAntti Palosaari1-8/+7
Some device vendors has forgotten set correct slave demod I2C address to eeprom. Use default I2C address when eeprom has no address at all. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-02-24[media] af9035: Add remaining it913x dual ids to af9035Malcolm Priestley1-0/+8
As follow on to patch af9035: Move it913x single devices to af9035 and patch 1. SNR is reported as db/10 values. All dual ids are added to af9035 and it913x driver disabled. it913x/it913x-fe removal patches to follow. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-02-24[media] af9035: add default 0x9135 slave I2C addressMalcolm Priestley1-0/+8
On some devices the vendor has not set EEPROM_2ND_DEMOD_ADDR. Checks tmp is not zero after call to get EEPROM_2ND_DEMOD_ADDR and sets the default slave address of 0x3a on 0x9135 devices. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-02-24[media] af9035: Move it913x single devices to af9035Malcolm Priestley1-6/+16
The generic v1 and v2 devices have been all tested. IDs tested USB_PID_ITETECH_IT9135 v1 & v2 USB_PID_ITETECH_IT9135_9005 v1 USB_PID_ITETECH_IT9135_9006 v2 Current Issues There is no signal on USB_PID_ITETECH_IT9135 v2 No SNR reported all devices. All single devices tune and scan fine. All remotes tested okay. Dual device failed to register second adapter USB_PID_KWORLD_UB499_2T_T09 It is not clear what the problem is at the moment. So only single IDs are transferred in this patch. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-02-05[media] af9035: add ID [2040:f900] Hauppauge WinTV-MiniStick 2Antti Palosaari1-0/+2
Add USB ID [2040:f900] for Hauppauge WinTV-MiniStick 2. Device is build upon IT9135 chipset. Tested-by: Stefan Becker <schtefan@gmx.net> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-12-04[media] af9035: unlock on error in af9035_i2c_master_xfer()Dan Carpenter1-2/+5
We introduced a couple new error paths which are missing unlocks. Fixes: 7760e148350b ('[media] af9035: Don't use dynamic static allocation') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Cc: stable@vger.kernel.org
2013-12-04[media] af9035: fix broken I2C and USB I/OAntti Palosaari1-4/+4
There was three small buffer len calculation bugs which caused driver non-working. These are coming from recent commit: commit 7760e148350bf6df95662bc0db3734e9d991cb03 [media] af9035: Don't use dynamic static allocation Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Cc: stable@vger.kernel.org
2013-11-29[media] af9035: add [0413:6a05] Leadtek WinFast DTV Dongle DualAntti Palosaari1-0/+2
It is IT9135 dual design. Thanks to Michael Piko for reporting that! Reported-by: Michael Piko <michael@piko.com.au> Signed-off-by: Antti Palosaari <crope@iki.fi> Cc: stable@vger.kernel.org Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-11-08[media] af9035: Don't use dynamic static allocationMauro Carvalho Chehab1-3/+26
Dynamic static allocation is evil, as Kernel stack is too low, and compilation complains about it on some archs: drivers/media/usb/dvb-usb-v2/af9035.c:142:1: warning: 'af9035_wr_regs' uses dynamic stack allocation [enabled by default] drivers/media/usb/dvb-usb-v2/af9035.c:305:1: warning: 'af9035_i2c_master_xfer' uses dynamic stack allocation [enabled by default] Instead, let's enforce a limit for the buffer to be the max size of a control URB payload data (64 bytes). Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-06-09[media] af9035: correct TS mode handlingAntti Palosaari1-6/+8
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-09[media] af9035: minor log writing changesAntti Palosaari1-3/+3
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-09[media] af9035: make checkpatch.pl happy!Antti Palosaari1-11/+13
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-09[media] af9035: implement I2C adapter read operationAntti Palosaari1-2/+20
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-26[media] af9035: fix missing unlock on error in af9035_ctrl_msg()Wei Yongjun1-8/+9
Add the missing unlock before return from function af9035_ctrl_msg() in the error handling case. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Antti Palosaari <crope@iki.fi> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-23[media] [PATH] enable dual tuner to Avermedia Twinstar in af9035 driverJose Alberto Reguero1-0/+1
This patch enable dual tuner for Avermedia Twinstar. Signed-off-by: Jose Alberto Reguero <jareguero@telefonica.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-22[media] af9035: style changes for remote controller pollingAntti Palosaari1-10/+13
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-22[media] af9035: check I/O errors on IR pollingAntti Palosaari1-3/+12
Use more careful error checks. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-22[media] af9035: enable remote controller for IT9135 tooAntti Palosaari1-4/+0
There is no difference towards AF9035 remote controller, so enable it. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-22[media] af9035: set demod TS mode config in read_config()Antti Palosaari1-5/+2
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-22[media] af9035: use already detected eeprom base addrAntti Palosaari1-9/+9
eeprom memory mapped base address is detected at the very first. Use it everywhere. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-22[media] af9035: select firmware loader according to firmwareAntti Palosaari1-5/+5
AF9035 and IT9135 supports two different firmware format. Select correct loader according to first byte of firmware file. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-22[media] it913x: get rid of it913x config structAntti Palosaari1-17/+1
We don't need it. Tuner ID and device address are enough. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-22[media] af9035: IT9135 dual tuner related changesAntti Palosaari1-101/+100
Now it supports IT9135 based dual tuner devices. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-22[media] af9035: basic support for IT9135 v2 chipsAntti Palosaari1-13/+30
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-22[media] af9035: merge af9035 and it9135 eeprom read routinesAntti Palosaari1-81/+58
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-08-24 00:46:53 +0300