summaryrefslogtreecommitdiff
path: root/drivers/media/rc
AgeCommit message (Collapse)AuthorFilesLines
2019-12-01media: imon: invalid dereference in imon_touch_eventSean Young1-2/+1
commit f3f5ba42c58d56d50f539854d8cc188944e96087 upstream. The touch timer is set up in intf1. If the second interface does not exist, the timer and touch input device are not setup and we get the following error, when touch events are reported via intf0. kernel BUG at kernel/time/timer.c:956! invalid opcode: 0000 [#1] SMP KASAN CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.4.0-rc1+ #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__mod_timer kernel/time/timer.c:956 [inline] RIP: 0010:__mod_timer kernel/time/timer.c:949 [inline] RIP: 0010:mod_timer+0x5a2/0xb50 kernel/time/timer.c:1100 Code: 45 10 c7 44 24 14 ff ff ff ff 48 89 44 24 08 48 8d 45 20 48 c7 44 24 18 00 00 00 00 48 89 04 24 e9 5a fc ff ff e8 ae ce 0e 00 <0f> 0b e8 a7 ce 0e 00 4c 89 74 24 20 e9 37 fe ff ff e8 98 ce 0e 00 RSP: 0018:ffff8881db209930 EFLAGS: 00010006 RAX: ffffffff86c2b200 RBX: 00000000ffffa688 RCX: ffffffff83efc583 RDX: 0000000000000100 RSI: ffffffff812f4d82 RDI: ffff8881d2356200 RBP: ffff8881d23561e8 R08: ffffffff86c2b200 R09: ffffed103a46abeb R10: ffffed103a46abea R11: ffff8881d2355f53 R12: dffffc0000000000 R13: 1ffff1103b64132d R14: ffff8881d2355f50 R15: 0000000000000006 FS: 0000000000000000(0000) GS:ffff8881db200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f75e2799000 CR3: 00000001d3b07000 CR4: 00000000001406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <IRQ> imon_touch_event drivers/media/rc/imon.c:1348 [inline] imon_incoming_packet.isra.0+0x2546/0x2f10 drivers/media/rc/imon.c:1603 usb_rx_callback_intf0+0x151/0x1e0 drivers/media/rc/imon.c:1734 __usb_hcd_giveback_urb+0x1f2/0x470 drivers/usb/core/hcd.c:1654 usb_hcd_giveback_urb+0x368/0x420 drivers/usb/core/hcd.c:1719 dummy_timer+0x120f/0x2fa2 drivers/usb/gadget/udc/dummy_hcd.c:1965 call_timer_fn+0x179/0x650 kernel/time/timer.c:1404 expire_timers kernel/time/timer.c:1449 [inline] __run_timers kernel/time/timer.c:1773 [inline] __run_timers kernel/time/timer.c:1740 [inline] run_timer_softirq+0x5e3/0x1490 kernel/time/timer.c:1786 __do_softirq+0x221/0x912 kernel/softirq.c:292 invoke_softirq kernel/softirq.c:373 [inline] irq_exit+0x178/0x1a0 kernel/softirq.c:413 exiting_irq arch/x86/include/asm/apic.h:536 [inline] smp_apic_timer_interrupt+0x12f/0x500 arch/x86/kernel/apic/apic.c:1137 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:830 </IRQ> RIP: 0010:default_idle+0x28/0x2e0 arch/x86/kernel/process.c:581 Code: 90 90 41 56 41 55 65 44 8b 2d 44 3a 8f 7a 41 54 55 53 0f 1f 44 00 00 e8 36 ee d0 fb e9 07 00 00 00 0f 00 2d fa dd 4f 00 fb f4 <65> 44 8b 2d 20 3a 8f 7a 0f 1f 44 00 00 5b 5d 41 5c 41 5d 41 5e c3 RSP: 0018:ffffffff86c07da8 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13 RAX: 0000000000000007 RBX: ffffffff86c2b200 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000006 RDI: ffffffff86c2ba4c RBP: fffffbfff0d85640 R08: ffffffff86c2b200 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 cpuidle_idle_call kernel/sched/idle.c:154 [inline] do_idle+0x3b6/0x500 kernel/sched/idle.c:263 cpu_startup_entry+0x14/0x20 kernel/sched/idle.c:355 start_kernel+0x82a/0x864 init/main.c:784 secondary_startup_64+0xa4/0xb0 arch/x86/kernel/head_64.S:241 Modules linked in: Reported-by: syzbot+f49d12d34f2321cf4df2@syzkaller.appspotmail.com Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-24media: rc: ir-rc6-decoder: enable toggle bit for Kathrein RCU-676 remoteMatthias Reichl1-2/+7
[ Upstream commit 85e4af0a7ae2f146769b7475ae531bf8a3f3afb4 ] The Kathrein RCU-676 remote uses the 32-bit rc6 protocol and toggles bit 15 (0x8000) on repeated button presses, like MCE remotes. Add it's customer code 0x80460000 to the 32-bit rc6 toggle handling code to get proper scancodes and toggle reports. Signed-off-by: Matthias Reichl <hias@horus.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-10-05media: mceusb: fix (eliminate) TX IR signal length limitA Sun1-138/+196
[ Upstream commit 9fc3ce31f5bde660197f35135e90a1cced58aa2c ] Fix and eliminate mceusb's IR length limit for IR signals transmitted to the MCE IR blaster ports. An IR signal TX exceeding 306 pulse/space samples presently causes -EINVAL return error. There's no such limitation nor error with the MCE device hardware. And valid IR signals exist with more than 400 pulse/space for the control of certain appliances (eg Panasonic ACXA75C00600 air conditioner). The scope of this patch is limited to the mceusb driver. There are still IR signal TX length and time constraints that related modules of rc core (eg LIRC) impose, further up the driver stack. Changes for mceusb_tx_ir(): Converts and sends LIRC IR pulse/space sequence to MCE device IR pulse/space format. Break long length LIRC sequence into multiple (unlimited number of) parts for sending to the MCE device. Reduce kernel stack IR buffer size: 128 (was 384) Increase MCE IR data packet size: 31 (was 5) Zero time LIRC pulse/space no longer copied to MCE IR data. Eliminate overwriting the source/input LIRC IR data in txbuf[]. Eliminate -EINVAL return; return number of IR samples sent (>0) or MCE write error code (<0). New mce_write() and mce_write_callback(): Implements synchronous blocking I/O, with timeout, for writing/sending data to the MCE device. An unlimited multipart IR signal sent to the MCE device faster than real time requires flow control absent with the original mce_request_packet() and mce_async_callback() asynchronous I/O implementation. Also absent is TX error feedback. mce_write() combines and replaces mce_request_packet() and mce_async_callback() with conversion to synchronous I/O. mce_write() returns bytes sent (>0) or MCE device write error (<0). Debug hex dump TX data before processing. Rename mce_async_out() -> mce_command_out(): The original name is misleading with underlying synchronous I/O implementation. Function renamed to mce_command_out(). Changes in mceusb_handle_command(): Add support for MCE device error case MCE_RSP_TX_TIMEOUT "IR TX timeout (TX buffer underrun)" Changes in mceusb_dev_printdata(): Changes support test and debug of multipart TX IR. Add buffer boundary information (offset and buffer size) to TX hex dump. Correct TX trace bug "Raw IR data, 0 pulse/space samples" Add trace for MCE_RSP_TX_TIMEOUT "IR TX timeout (TX buffer underrun)" Other changes: The driver's write to USB device architecture change (async to sync I/O) is significant so we bump DRIVER_VERSION to "1.95" (from "1.94"). Tests: $ cat -n irdata1 | head -3 1 carrier 36000 2 pulse 6350 3 space 6350 $ cat -n irdata1 | tail -3 76 pulse 6350 77 space 6350 78 pulse 6350 $ ir-ctl -s irdata1 [1549021.073612] mceusb 1-1.3:1.0: requesting 36000 HZ carrier [1549021.073635] mceusb 1-1.3:1.0: tx data[0]: 9f 06 01 45 (len=4 sz=4) [1549021.073649] mceusb 1-1.3:1.0: Request carrier of 35714 Hz (period 28us) [1549021.073848] mceusb 1-1.3:1.0: tx done status = 4 (wait = 100, expire = 100 (1000ms), urb->actual_length = 4, urb->status = 0) [1549021.074689] mceusb 1-1.3:1.0: rx data[0]: 9f 06 01 45 (len=4 sz=4) [1549021.074701] mceusb 1-1.3:1.0: Got carrier of 35714 Hz (period 28us) [1549021.102023] mceusb 1-1.3:1.0: tx data[0]: 9f 08 03 (len=3 sz=3) [1549021.102036] mceusb 1-1.3:1.0: Request transmit blaster mask of 0x03 [1549021.102219] mceusb 1-1.3:1.0: tx done status = 3 (wait = 100, expire = 100 (1000ms), urb->actual_length = 3, urb->status = 0) [1549021.131979] mceusb 1-1.3:1.0: tx data[0]: 9e ff 7f ff 7f ff 7f ff 7f ff 7f ff 7f ff 7f ff 7f ff 7f ff 7f ff 7f ff 7f ff 7f ff 7f ff 7f 9e ff 7f ff 7f ff 7f ff 7f ff 7f ff 7f ff 7f ff 7f ff 7f ff 7f ff 7f ff 7f ff 7f ff 7f ff 7f 91 ff (len=81 sz=81) [1549021.131992] mceusb 1-1.3:1.0: Raw IR data, 30 pulse/space samples [1549021.133592] mceusb 1-1.3:1.0: tx done status = 81 (wait = 100, expire = 100 (1000ms), urb->actual_length = 81, urb->status = 0) Hex dumps limited to 64 bytes. 0xff is MCE maximum time pulse, 0x7f is MCE maximum time space. $ cat -n irdata2 | head -3 1 carrier 36000 2 pulse 50 3 space 50 $ cat -n irdata2 | tail -3 254 pulse 50 255 space 50 256 pulse 50 $ ir-ctl -s irdata2 [1549306.586998] mceusb 1-1.3:1.0: tx data[0]: 9f 08 03 (len=3 sz=3) [1549306.587015] mceusb 1-1.3:1.0: Request transmit blaster mask of 0x03 [1549306.587252] mceusb 1-1.3:1.0: tx done status = 3 (wait = 100, expire = 100 (1000ms), urb->actual_length = 3, urb->status = 0) [1549306.613275] mceusb 1-1.3:1.0: tx data[0]: 9e 81 01 81 01 81 01 81 01 81 01 81 01 81 01 81 01 81 01 81 01 81 01 81 01 81 01 81 01 81 01 9e 81 01 81 01 81 01 81 01 81 01 81 01 81 01 81 01 81 01 81 01 81 01 81 01 81 01 81 01 81 01 9e 81 (len=128 sz=128) [1549306.613291] mceusb 1-1.3:1.0: Raw IR data, 30 pulse/space samples [1549306.614837] mceusb 1-1.3:1.0: tx done status = 128 (wait = 100, expire = 100 (1000ms), urb->actual_length = 128, urb->status = 0) [1549306.614861] mceusb 1-1.3:1.0: tx data[0]: 9e 01 81 01 81 01 81 01 81 01 81 01 81 01 81 01 81 01 81 01 81 01 81 01 81 01 81 01 81 01 81 9e 01 81 01 81 01 81 01 81 01 81 01 81 01 81 01 81 01 81 01 81 01 81 01 81 01 81 01 81 01 81 9e 01 (len=128 sz=128) [1549306.614869] mceusb 1-1.3:1.0: Raw IR data, 30 pulse/space samples [1549306.620199] mceusb 1-1.3:1.0: tx done status = 128 (wait = 100, expire = 100 (1000ms), urb->actual_length = 128, urb->status = 0) [1549306.620212] mceusb 1-1.3:1.0: tx data[0]: 89 81 01 81 01 81 01 81 01 81 80 (len=11 sz=11) [1549306.620221] mceusb 1-1.3:1.0: Raw IR data, 9 pulse/space samples [1549306.633294] mceusb 1-1.3:1.0: tx done status = 11 (wait = 98, expire = 100 (1000ms), urb->actual_length = 11, urb->status = 0) Hex dumps limited to 64 bytes. 0x81 is MCE minimum time pulse, 0x01 is MCE minimum time space. TX IR part 3 sz=11 shows 20msec I/O blocking delay (100expire - 98wait = 2jiffies) Signed-off-by: A Sun <as1033x@comcast.net> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-10-05media: rc: imon: Allow iMON RC protocol for ffdc 7e deviceDarius Rad1-1/+6
[ Upstream commit b20a6e298bcb8cb8ae18de26baaf462a6418515b ] Allow selecting the IR protocol, MCE or iMON, for a device that identifies as follows (with config id 0x7e): 15c2:ffdc SoundGraph Inc. iMON PAD Remote Controller As the driver is structured to default to iMON when both RC protocols are supported, existing users of this device (using MCE protocol) will need to manually switch to MCE (RC-6) protocol from userspace (with ir-keytable, sysfs). Signed-off-by: Darius Rad <alpha@area49.net> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-10-05media: iguanair: add sanity checksOliver Neukum1-8/+7
[ Upstream commit ab1cbdf159beba7395a13ab70bc71180929ca064 ] The driver needs to check the endpoint types, too, as opposed to the number of endpoints. This also requires moving the check earlier. Reported-by: syzbot+01a77b82edaa374068e1@syzkaller.appspotmail.com Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-10-05media: mtk-cir: lower de-glitch counter for rc-mm protocolSean Young1-0/+8
[ Upstream commit 5dd4b89dc098bf22cd13e82a308f42a02c102b2b ] The rc-mm protocol can't be decoded by the mtk-cir since the de-glitch filter removes pulses/spaces shorter than 294 microseconds. Tested on a BananaPi R2. Signed-off-by: Sean Young <sean@mess.org> Acked-by: Sean Wang <sean.wang@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26media: spi: IR LED: add missing of table registrationDaniel Gomez1-0/+1
[ Upstream commit 24e4cf770371df6ad49ed873f21618d9878f64c8 ] MODULE_DEVICE_TABLE(of, <of_match_table> should be called to complete DT OF mathing mechanism and register it. Before this patch: modinfo drivers/media/rc/ir-spi.ko | grep alias After this patch: modinfo drivers/media/rc/ir-spi.ko | grep alias alias: of:N*T*Cir-spi-ledC* alias: of:N*T*Cir-spi-led Reported-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Daniel Gomez <dagmcr@gmail.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-31media: serial_ir: Fix use-after-free in serial_ir_init_moduleYueHaibing1-8/+1
commit 56cd26b618855c9af48c8301aa6754ced8dd0beb upstream. Syzkaller report this: BUG: KASAN: use-after-free in sysfs_remove_file_ns+0x5f/0x70 fs/sysfs/file.c:468 Read of size 8 at addr ffff8881dc7ae030 by task syz-executor.0/6249 CPU: 1 PID: 6249 Comm: syz-executor.0 Not tainted 5.0.0-rc8+ #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xfa/0x1ce lib/dump_stack.c:113 print_address_description+0x65/0x270 mm/kasan/report.c:187 kasan_report+0x149/0x18d mm/kasan/report.c:317 ? 0xffffffffc1728000 sysfs_remove_file_ns+0x5f/0x70 fs/sysfs/file.c:468 sysfs_remove_file include/linux/sysfs.h:519 [inline] driver_remove_file+0x40/0x50 drivers/base/driver.c:122 remove_bind_files drivers/base/bus.c:585 [inline] bus_remove_driver+0x186/0x220 drivers/base/bus.c:725 driver_unregister+0x6c/0xa0 drivers/base/driver.c:197 serial_ir_init_module+0x169/0x1000 [serial_ir] do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f9450132c58 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000020000100 RDI: 0000000000000003 RBP: 00007f9450132c70 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f94501336bc R13: 00000000004bcefa R14: 00000000006f6fb0 R15: 0000000000000004 Allocated by task 6249: set_track mm/kasan/common.c:85 [inline] __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:495 kmalloc include/linux/slab.h:545 [inline] kzalloc include/linux/slab.h:740 [inline] bus_add_driver+0xc0/0x610 drivers/base/bus.c:651 driver_register+0x1bb/0x3f0 drivers/base/driver.c:170 serial_ir_init_module+0xe8/0x1000 [serial_ir] do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 6249: set_track mm/kasan/common.c:85 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:457 slab_free_hook mm/slub.c:1430 [inline] slab_free_freelist_hook mm/slub.c:1457 [inline] slab_free mm/slub.c:3005 [inline] kfree+0xe1/0x270 mm/slub.c:3957 kobject_cleanup lib/kobject.c:662 [inline] kobject_release lib/kobject.c:691 [inline] kref_put include/linux/kref.h:67 [inline] kobject_put+0x146/0x240 lib/kobject.c:708 bus_remove_driver+0x10e/0x220 drivers/base/bus.c:732 driver_unregister+0x6c/0xa0 drivers/base/driver.c:197 serial_ir_init_module+0x14c/0x1000 [serial_ir] do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8881dc7ae000 which belongs to the cache kmalloc-256 of size 256 The buggy address is located 48 bytes inside of 256-byte region [ffff8881dc7ae000, ffff8881dc7ae100) The buggy address belongs to the page: page:ffffea000771eb80 count:1 mapcount:0 mapping:ffff8881f6c02e00 index:0x0 flags: 0x2fffc0000000200(slab) raw: 02fffc0000000200 ffffea0007d14800 0000000400000002 ffff8881f6c02e00 raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881dc7adf00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff8881dc7adf80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffff8881dc7ae000: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881dc7ae080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8881dc7ae100: fc fc fc fc fc fc fc fc 00 00 00 00 00 00 00 00 There are already cleanup handlings in serial_ir_init error path, no need to call serial_ir_exit do it again in serial_ir_init_module, otherwise will trigger a use-after-free issue. Fixes: fa5dc29c1fcc ("[media] lirc_serial: move out of staging and rename to serial_ir") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-12media: rc: ensure close() is called on rc_unregister_deviceSean Young1-0/+2
[ Upstream commit 8e782fcf78275f505194e767c515202d4fd274bc ] If userspace has an open file descriptor on the rc input device or lirc device when rc_unregister_device() is called, then the rc close() is never called. This ensures that the receiver is turned off on the nuvoton-cir driver during shutdown. Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-01-09media: rc: cec devices do not have a lirc chardevSean Young1-2/+4
commit e5bb9d3d755f128956ed467ae50b41d22bb680c6 upstream. This fixes an oops in ir_lirc_scancode_event(). BUG: unable to handle kernel NULL pointer dereference at 0000000000000038 PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI CPU: 9 PID: 27687 Comm: kworker/9:2 Tainted: P           OE 4.18.12-200.fc28.x86_64 #1 Hardware name: Supermicro C7X99-OCE-F/C7X99-OCE-F, BIOS 2.1a 06/15/2018 Workqueue: events pulse8_irq_work_handler [pulse8_cec] RIP: 0010:ir_lirc_scancode_event+0x3d/0xb0 [rc_core] Code: 8d ae b4 07 00 00 49 81 c6 b8 07 00 00 53 e8 4a df c3 d5 48 89 ef 49 89 45 00 e8 4e 84 41 d6 49 8b 1e 49 89 c4 4c 39 f3 74 58 <8b> 43 38 8b 53 40 89 c1 2b 4b 3c 39 ca 72 41 21 d0 49 8b 7d 00 49 RSP: 0018:ffffaa10e3c07d58 EFLAGS: 00010017 RAX: 0000000000000002 RBX: 0000000000000000 RCX: 0000000000000018 RDX: 0000000000000001 RSI: 00316245397fa93c RDI: ffff966d31c8d7b4 RBP: ffff966d31c8d7b4 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000003 R11: ffffaa10e3c07e28 R12: 0000000000000002 R13: ffffaa10e3c07d88 R14: ffff966d31c8d7b8 R15: 0000000000000073 FS:  0000000000000000(0000) GS:ffff966d3f440000(0000) knlGS:0000000000000000 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000038 CR3: 00000009d820a003 CR4: 00000000003606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace:  ir_do_keydown+0x75/0x260 [rc_core]  rc_keydown+0x54/0xc0 [rc_core]  cec_received_msg_ts+0xaa8/0xaf0 [cec]  process_one_work+0x1a1/0x350  worker_thread+0x30/0x380  ? pwq_unbound_release_workfn+0xd0/0xd0  kthread+0x112/0x130  ? kthread_create_worker_on_cpu+0x70/0x70  ret_from_fork+0x35/0x40 Modules linked in: rc_tt_1500 dvb_usb_dvbsky dvb_usb_v2 uas usb_storage fuse vhost_net vhost tap xt_CHECKSUM iptable_mangle ip6t_REJECT nf_reject_ipv6 tun 8021q garp mrp xt_nat macvlan xfs devlink ebta  si2157 si2168 cx25840 cx23885 kvm altera_ci tda18271 joydev ir_rc6_decoder rc_rc6_mce crct10dif_pclmul crc32_pclmul ghash_clmulni_intel intel_cstate intel_uncore altera_stapl m88ds3103 tveeprom cx2341  mxm_wmi igb crc32c_intel megaraid_sas dca i2c_algo_bit wmi vfio_pci irqbypass vfio_virqfd vfio_iommu_type1 vfio i2c_dev CR2: 0000000000000038 Cc: <stable@vger.kernel.org> # v4.16+ Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller1-4/+6
Daniel Borkmann says: ==================== pull-request: bpf-next 2018-08-07 The following pull-request contains BPF updates for your *net-next* tree. The main changes are: 1) Add cgroup local storage for BPF programs, which provides a fast accessible memory for storing various per-cgroup data like number of transmitted packets, etc, from Roman. 2) Support bpf_get_socket_cookie() BPF helper in several more program types that have a full socket available, from Andrey. 3) Significantly improve the performance of perf events which are reported from BPF offload. Also convert a couple of BPF AF_XDP samples overto use libbpf, both from Jakub. 4) seg6local LWT provides the End.DT6 action, which allows to decapsulate an outer IPv6 header containing a Segment Routing Header. Adds this action now to the seg6local BPF interface, from Mathieu. 5) Do not mark dst register as unbounded in MOV64 instruction when both src and dst register are the same, from Arthur. 6) Define u_smp_rmb() and u_smp_wmb() to their respective barrier instructions on arm64 for the AF_XDP sample code, from Brian. 7) Convert the tcp_client.py and tcp_server.py BPF selftest scripts over from Python 2 to Python 3, from Jeremy. 8) Enable BTF build flags to the BPF sample code Makefile, from Taeung. 9) Remove an unnecessary rcu_read_lock() in run_lwt_bpf(), from Taehee. 10) Several improvements to the README.rst from the BPF documentation to make it more consistent with RST format, from Tobin. 11) Replace all occurrences of strerror() by calls to strerror_r() in libbpf and fix a FORTIFY_SOURCE build error along with it, from Thomas. 12) Fix a bug in bpftool's get_btf() function to correctly propagate an error via PTR_ERR(), from Yue. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-03Merge tag 'media/v4.18-3' of ↵Linus Torvalds3-6/+15
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fixes from Mauro Carvalho Chehab: - a deadlock regression at vsp1 driver - some Remote Controller fixes related to the new BPF filter logic added on it for Kernel 4.18. * tag 'media/v4.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: media: v4l: vsp1: Fix deadlock in VSPDL DRM pipelines media: rc: read out of bounds if bpf reports high protocol number media: bpf: ensure bpf program is freed on detach media: rc: be less noisy when driver misbehaves
2018-08-03bpf: extend bpf_prog_array to store pointers to the cgroup storageRoman Gushchin1-4/+6
This patch converts bpf_prog_array from an array of prog pointers to the array of struct bpf_prog_array_item elements. This allows to save a cgroup storage pointer for each bpf program efficiently attached to a cgroup. Signed-off-by: Roman Gushchin <guro@fb.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-07-30media: rc: read out of bounds if bpf reports high protocol numberSean Young1-2/+10
The repeat period is read from a static array. If a keydown event is reported from bpf with a high protocol number, we read out of bounds. This is unlikely to end up with a reasonable repeat period at the best of times, in which case no timely key up event is generated. Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-26media: bpf: ensure bpf program is freed on detachSean Young1-0/+1
Currently we are leaking bpf programs when they are detached from the lirc device; the refcount never reaches zero. Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-06-27media: rc: be less noisy when driver misbehavesSean Young1-4/+4
Since commit 48231f289e52 ("media: rc: drivers should produce alternate pulse and space timing events"), on meson-ir we are regularly producing errors. Reduce to warning level and only warn once to avoid flooding the log. A proper fix for meson-ir is going to be too large for v4.18. Signed-off-by: Sean Young <sean@mess.org> Cc: stable@vger.kernel.org # 4.17+ Tested-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-06-26bpf: fix attach type BPF_LIRC_MODE2 dependency wrt CONFIG_CGROUP_BPFSean Young1-12/+2
If the kernel is compiled with CONFIG_CGROUP_BPF not enabled, it is not possible to attach, detach or query IR BPF programs to /dev/lircN devices, making them impossible to use. For embedded devices, it should be possible to use IR decoding without cgroups or CONFIG_CGROUP_BPF enabled. This change requires some refactoring, since bpf_prog_{attach,detach,query} functions are now always compiled, but their code paths for cgroups need moving out. Rather than a #ifdef CONFIG_CGROUP_BPF in kernel/bpf/syscall.c, moving them to kernel/bpf/cgroup.c and kernel/bpf/sockmap.c does not require #ifdefs since that is already conditionally compiled. Fixes: f4364dcfc86d ("media: rc: introduce BPF_PROG_LIRC_MODE2") Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-06-12Merge tag 'armsoc-soc' of ↵Linus Torvalds1-14/+3
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform updates from Olof Johansson: "Here are the main updates for SoC support (besides DT additions) for ARM 32- and 64-bit platforms. The branch also contains defconfig updates to turn on drivers and options as needed on the various platforms. The largest parts of the delta are from cleanups moving platform data and board file setup of TI platforms to ti-sysc bus drivers. There are also some sweeping changes of eeprom and nand setup on Davinci, i.MX and other platforms. Samsung is removing support for Exynos5440, which was an oddball SoC that hasn't been seen much use in designs. Renesas is adding support for new SoCs (R-Car E3, RZ/G1C and RZ/N1D). Linus Walleij is also removing support for ux500 (Sony Ericsson) U8540/9540 SoCs that never made it to significant mass production and products" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (133 commits) MAINTAINERS: add NXP linux team maillist as i.MX reviewer ARM: stm32: Don't select DMA unconditionally on STM32MP157C arm64: defconfig: Enable PCIe on msm8996 and db820c ARM: pxa3xx: enable external wakeup pins ARM: pxa: stargate2: use device properties for at24 eeprom arm64: defconfig: Enable HISILICON_LPC arm64: defconfig: enable drivers for Poplar support arm64: defconfig: Enable UFS on msm8996 ARM: berlin: switch to SPDX license identifier arm: berlin: remove non-necessary flush_cache_all() ARM: berlin: extend BG2CD Kconfig entry OMAP: CLK: CLKSRC: Add suspend resume hooks ARM: AM43XX: Add functions to save/restore am43xx control registers ASoC: ams_delta: use GPIO lookup table ARM: OMAP1: ams-delta: add GPIO lookup tables bus: ti-sysc: Fix optional clocks array access ARM: OMAP2+: Make sure LOGICRETSTATE bits are not cleared ARM: OMAP2+: prm44xx: Inroduce cpu_pm notifiers for context save/restore ARM: OMAP2+: prm44xx: Introduce context save/restore for am43 PRCM IO ARM: OMAP2+: powerdomain: Introduce cpu_pm notifiers for context save/restore ...
2018-06-07Merge tag 'media/v4.18-2' of ↵Linus Torvalds23-176/+430
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - remove of atomisp driver from staging, as nobody would have time to dedicate huge efforts to fix all the problems there. Also, we have a feeling that the driver may not even run the way it is. - move Zoran driver to staging, in order to be either fixed to use VB2 and the proper media kAPIs or to be removed - remove videobuf-dvb driver, with is unused for a while - some V4L2 documentation fixes/improvements - new sensor drivers: imx258 and ov7251 - a new driver was added to allow using I2C transparent drivers - several improvements at the ddbridge driver - several improvements at the ISDB pt1 driver, making it more coherent with the DVB framework - added a new platform driver for MIPI CSI-2 RX: cadence - now, all media drivers can be compiled on x86 with COMPILE_TEST - almost all media drivers now build on non-x86 architectures with COMPILE_TEST - lots of other random stuff: cleanups, support for new board models, bug fixes, etc * tag 'media/v4.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (464 commits) media: omap2: fix compile-testing with FB_OMAP2=m media: media/radio/Kconfig: add back RADIO_ISA media: v4l2-ioctl.c: fix missing unlock in __video_do_ioctl() media: pxa_camera: ignore -ENOIOCTLCMD from v4l2_subdev_call for s_power media: arch: sh: migor: Fix TW9910 PDN gpio media: staging: tegra-vde: Reset VDE regardless of memory client resetting failure media: marvel-ccic: mmp: select VIDEOBUF2_VMALLOC/DMA_CONTIG media: marvel-ccic: allow ccic and mmp drivers to coexist media: uvcvideo: Prevent setting unavailable flags media: ddbridge: conditionally enable fast TS for stv0910-equipped bridges media: dvb-frontends/stv0910: make TS speed configurable media: ddbridge/mci: add identifiers to function definition arguments media: ddbridge/mci: protect against out-of-bounds array access in stop() media: rc: ensure input/lirc device can be opened after register media: rc: nuvoton: Keep device enabled during reg init media: rc: nuvoton: Keep track of users on CIR enable/disable media: rc: nuvoton: Tweak the interrupt enabling dance media: uvcvideo: Support realtek's UVC 1.5 device media: uvcvideo: Fix driver reference counting media: gspca_zc3xx: Enable short exposure times for OV7648 ...
2018-05-30media: rc: introduce BPF_PROG_LIRC_MODE2Sean Young6-2/+388
Add support for BPF_PROG_LIRC_MODE2. This type of BPF program can call rc_keydown() to reported decoded IR scancodes, or rc_repeat() to report that the last key should be repeated. The bpf program can be attached to using the bpf(BPF_PROG_ATTACH) syscall; the target_fd must be the /dev/lircN device. Acked-by: Yonghong Song <yhs@fb.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-05-29media: rc: ensure input/lirc device can be opened after registerSean Young1-2/+2
Since commit cb84343fced1 ("media: lirc: do not call close() or open() on unregistered devices") rc_open() will return -ENODEV if rcdev->registered is false. Ensure this is set before we register the input device and the lirc device, else we have a short window where the neither the lirc or input device can be opened. Fixes: cb84343fced1 ("media: lirc: do not call close() or open() on unregistered devices") Cc: stable@vger.kernel.org # v4.16+ Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-29media: rc: nuvoton: Keep device enabled during reg initMichał Winiarski1-3/+6
Doing writes when the device is disabled seems to be a NOOP. For CIR device, we should enable it, initialize it, and then disable it until it's opened. CIR_WAKE should always be enabled. Signed-off-by: Michał Winiarski <michal.winiarski@intel.com> Cc: Jarod Wilson <jarod@redhat.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-29media: rc: nuvoton: Keep track of users on CIR enable/disableMichał Winiarski1-46/+36
Core rc keeps track of the users - let's use it to tweak the code and use the common code path on suspend/resume. Signed-off-by: Michał Winiarski <michal.winiarski@intel.com> Cc: Jarod Wilson <jarod@redhat.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-29media: rc: nuvoton: Tweak the interrupt enabling danceMichał Winiarski1-3/+3
It appears that we need to enable CIR device before attempting to touch some of the registers. Previously, this was not a big issue, since we were rarely seeing nvt_close() getting called. Unfortunately, since commit cb84343fced1 ("media: lirc: do not call close() or open() on unregistered devices") the initial open() during probe from rc_setup_rx_device() is no longer successful, which means that userspace clients will actually end up calling nvt_open()/nvt_close(). Since nvt_open() is broken, the device doesn't seem to work as expected. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=199597 Signed-off-by: Michał Winiarski <michal.winiarski@intel.com> Cc: Jarod Wilson <jarod@redhat.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-14media: rc: ite-cir: lower timeout and extend allowed timeout rangeMatthias Reichl2-10/+5
The minimum possible timeout of ite-cir is 8 samples, which is typically about 70us. The driver however changes the FIFO trigger level from the hardware's default of 1 byte to 17 bytes, so the minimum usable timeout value is 17 * 8 samples, which is typically about 1.2ms. Tests showed that using timeouts down to 1.2ms actually work fine. The current default timeout of 200ms is much longer than necessary and the maximum timeout of 1s seems to have been chosen a bit arbitrarily. So change the minimum timeout to the driver's limit of 17 * 8 samples and bring timeout and maximum timeout in line with the settings of many other receivers. Signed-off-by: Matthias Reichl <hias@horus.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-14media: rc: winbond: do not send reset and timeout raw events on startupSean Young1-2/+2
ir_raw_event_set_idle() sends a timeout event which is not needed, and on startup no reset event is needed either. Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-14media: rc: decoders do not need to check for transitionsSean Young3-19/+0
Drivers should never produce consecutive pulse or space raw events. Should that occur, we would have bigger problems than this code is trying to guard against. Note that we already log an error should a driver misbehave. Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-14media: rc: drivers should produce alternate pulse and space timing eventsSean Young1-4/+15
Report an error if this is not the case or any problem with the generated raw events. Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-14media: rc: default to idle on at startup or after resetSean Young1-0/+1
Any spaces events received after a reset or startup should be discarded, so ensure the rc device is in idle mode. This also makes it much easier to detect incorrect raw events, as we will do in a following commit. Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-14media: mceusb: add missing breakSean Young1-0/+1
Fallthrough is not intended here. Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-14media: mceusb: filter out bogus timing irdata of duration 0Sean Young1-0/+5
A mceusb device has been observed producing invalid irdata. Proactively guard against this. Suggested-by: Matthias Reichl <hias@horus.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-14media: mceusb: MCE_CMD_SETIRTIMEOUT cause strange behaviour on deviceSean Young1-3/+19
If the IR timeout is set on vid 1784 pid 0011, the device starts behaving strangely. Reported-by: Matthias Reichl <hias@horus.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-14Merge tag 'omap-for-v4.18/ti-sysc-signed' of ↵Olof Johansson1-14/+3
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc ti-sysc driver related changes for omap variants This series improves the ti-sysc interconnect target module driver to the point where a most of SoC can be booted with interconnect target module data configured in device tree instead of legacy platform data. The related device tree changes need some more work though, and can wait for v4.19. Also some drivers using nested interconnects like DSS need more work. We can now remove the unused pm-noop code that is not doing anything any longer. And we can now initialize things for PM and display pdata later to prepare things for using ti-sysc driver. We also need to add some more quirk handling so we can boot both with platform data and dts data. * tag 'omap-for-v4.18/ti-sysc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: bus: ti-sysc: Show module information for suspend if DEBUG is enabled bus: ti-sysc: Tag sdio and wdt with legacy mode for suspend bus: ti-sysc: Detect UARTs for SYSC_QUIRK_LEGACY_IDLE quirk on omap4 bus: ti-sysc: Detect omap4 type timers for quirk bus: ti-sysc: Add initial support for external resets bus: ti-sysc: Improve suspend and resume handling bus: ti-sysc: Tag some modules resource providers for noirq suspend bus: ti-sysc: Add handling for clkctrl opt clocks bus: ti-sysc: Make child clock alias handling more generic bus: ti-sysc: Handle simple-bus for nested children ARM: OMAP2+: Make display related init into device_initcall ARM: OMAP2+: Initialize SoC PM later ARM: OMAP2+: Only probe SDMA via ti-sysc if configured in dts ARM: OMAP2+: Use signed value for sysc register offsets ARM: OMAP2+: Allow using ti-sysc for system timers ARM: OMAP2+: Drop unused pm-noop Signed-off-by: Olof Johansson <olof@lixom.net>
2018-05-10Merge tag 'v4.17-rc4' into patchworkMauro Carvalho Chehab6-6/+6
Linux 4.17-rc4 * tag 'v4.17-rc4': (920 commits) Linux 4.17-rc4 KVM: x86: remove APIC Timer periodic/oneshot spikes genksyms: fix typo in parse.tab.{c,h} generation rules kbuild: replace hardcoded bison in cmd_bison_h with $(YACC) gcc-plugins: fix build condition of SANCOV plugin MAINTAINERS: Update Kbuild entry with a few paths Revert "usb: host: ehci: Use dma_pool_zalloc()" platform/x86: Kconfig: Fix dell-laptop dependency chain. platform/x86: asus-wireless: Fix NULL pointer dereference arm64: vgic-v2: Fix proxying of cpuif access KVM: arm/arm64: vgic_init: Cleanup reference to process_maintenance KVM: arm64: Fix order of vcpu_write_sys_reg() arguments MAINTAINERS & files: Canonize the e-mails I use at files media: imx-media-csi: Fix inconsistent IS_ERR and PTR_ERR tools: power/acpi, revert to LD = gcc bdi: Fix oops in wb_workfn() RDMA/cma: Do not query GID during QP state transition to RTR IB/mlx4: Fix integer overflow when calculating optimal MTT size IB/hfi1: Fix memory leak in exception path in get_irq_affinity() IB/{hfi1, rdmavt}: Fix memory leak in hfi1_alloc_devdata() upon failure ...
2018-05-04media: rc: allow build pnp-dependent drivers with COMPILE_TESTMauro Carvalho Chehab1-5/+5
The pnp header already provide enough stub to build those drivers with COMPILE_TEST on non-x86 archs. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Acked-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-04media: rc: imon decoder: support the stickSean Young2-3/+135
The iMON PAD controller has a analog stick, which can be switched to keyboard mode (cursor keys) or work as a crappy mouse. Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-04media: rc: only register protocol for rc device if enabledSean Young1-12/+18
The raw_register function exists to create input devices associated with that IR protocol. If the mce_kbd module is loaded, then every rc device will have mce_kbd input devices, even if the protocol is not enabled. Change this to call the register function to when the protocol is enabled. Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-04MAINTAINERS & files: Canonize the e-mails I use at filesMauro Carvalho Chehab6-6/+6
From now on, I'll start using my @kernel.org as my development e-mail. As such, let's remove the entries that point to the old mchehab@s-opensource.com at MAINTAINERS file. For the files written with a copyright with mchehab@s-opensource, let's keep Samsung on their names, using mchehab+samsung@kernel.org, in order to keep pointing to my employer, with sponsors the work. For the files written before I join Samsung (on July, 4 2013), let's just use mchehab@kernel.org. For bug reports, we can simply point to just kernel.org, as this will reach my mchehab+samsung inbox anyway. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Brian Warner <brian.warner@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-04-20media: rc: mtk-cir: use of_device_get_match_data()Ryder Lee1-3/+1
The usage of of_device_get_match_data() reduce the code size a bit. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Acked-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-04-20media: rc: ir-spi: update Andi's e-mailAndi Shyti1-2/+2
Because I will be leaving Samsung soon, update my e-mail to the etezian.org mail. Cc: Andi Shyti <andi@etezian.org> Signed-off-by: Andi Shyti <andi.shyti@samsung.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-04-20media: rc: mceusb: allow the timeout to be configurableSean Young1-0/+22
mceusb devices have a default timeout of 100ms, but this can be changed. Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-04-20media: rc: mceusb: IR of length 0 means IR timeout, not resetSean Young1-1/+6
The last usb packet with IR data will end with 0x80 (MCE_IRDATA_TRAILER). If we reset the decoder state at this point, IR decoding can fail. Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-04-20media: rc: mce_kbd decoder: fix race conditionSean Young2-7/+18
The MCE keyboard sends both key down and key up events. We have a timeout handler mce_kbd_rx_timeout() in case the keyup event is never received; however, this may race with new key down events from occurring. The race is that key down scancode arrives and key down events are generated. The timeout handler races this and generates key up events straight afterwards. Since the keyboard generates scancodes every 100ms, most likely the keys will be repeated 100ms later, and now we have new key down events and the user sees duplicate key presses. Reported-by: Matthias Reichl <hias@horus.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-04-20media: rc: mce_kbd decoder: remove superfluous call to input_syncSean Young1-1/+0
There is nothing to sync in this code path. Reported-by: Matthias Reichl <hias@horus.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-04-20media: rc: mce_kbd decoder: fix stuck keysSean Young1-0/+2
The MCE Remote sends a 0 scancode when keys are released. If this is not received or decoded, then keys can get "stuck"; the keyup event is not sent since the input_sync() is missing from the timeout handler. Cc: stable@vger.kernel.org Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-04-20media: rc: mce_kbd protocol encodes two scancodesSean Young2-10/+13
If two keys are pressed, then both keys are encoded in the scancode. This makes the mce keyboard more responsive. Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-04-20media: rc: mce_kbd decoder: low timeout values cause double keydownsSean Young1-5/+7
The mce keyboard repeats pressed keys every 100ms. If the IR timeout is set to less than that, we send key up events before the repeat arrives, so we have key up/key down for each IR repeat. The keyboard ends any sequence with a 0 scancode, in which case all keys are cleared so there is no need to run the timeout timer: it only exists for the case that the final 0 was not received. Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-04-20media: rc: per-protocol repeat period and minimum keyup timerSean Young2-28/+30
Each IR protocol has its own repeat period. We can minimise the keyup timer to be the protocol period + IR timeout. This makes keys less "sticky" and makes IR more reactive and nicer to use. This feature was previously attempted in commit d57ea877af38 ("media: rc: per-protocol repeat period"), but that did not take the IR timeout into account, and had to be reverted. Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-04-20media: rc: add ioctl to get the current timeoutSean Young1-0/+7
Since the kernel now modifies the timeout, make it possible to retrieve the current value. Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-04-20media: rc: set timeout to smallest value required by enabled protocolsSean Young13-7/+47
The longer the IR timeout, the longer the rc device waits until delivering the trailing space. So, by reducing this timeout, we reduce the delay for the last scancode to be delivered. Note that the lirc daemon disables all protocols, in which case we revert back to the default value. Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-03-08 04:53:55 +0300