summaryrefslogtreecommitdiff
path: root/drivers/media/platform/rcar-vin/rcar-v4l2.c
AgeCommit message (Collapse)AuthorFilesLines
2022-01-27media: rcar-vin: Update format alignment constraintsNiklas Söderlund1-4/+11
[ Upstream commit da6911f330d40cfe115a37249e47643eff555e82 ] This change fixes two issues with the size constraints for buffers. - There is no width alignment constraint for RGB formats. Prior to this change they were treated as YUV and as a result were more restricted than needed. Add a new check to differentiate between the two. - The minimum width and height supported is 5x2, not 2x4, this is an artifact from the driver's soc-camera days. Fix this incorrect assumption. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-09-27media: rcar-vin: Extend RAW8 support to all RGB layoutsNiklas Söderlund1-0/+27
Extend the list of supported formats to include all RGB layouts of RAW8. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-09-27media: rcar-vin: Fix a reference count leak.Qiushi Wu1-1/+3
pm_runtime_get_sync() increments the runtime PM usage counter even when it returns an error code. Thus call pm_runtime_put_noidle() if pm_runtime_get_sync() fails. Fixes: 2a18fbec1dab ("media: rcar-vin: Move pm_runtime_{get,put} out of helpers") Signed-off-by: Qiushi Wu <wu000273@umn.edu> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-07-04media: rcar-vin: Add support for MEDIA_BUS_FMT_SRGGB8_1X8 formatLad Prabhakar1-0/+4
Add support for MEDIA_BUS_FMT_SRGGB8_1X8 format in rcar-vin by setting format type to RAW8 in VNMC register and appropriately setting the bpp and bytesperline to enable V4L2_PIX_FMT_SRGGB8. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-07-04media: rcar-vin: Invalidate pipeline if conversion is not possible on input ↵Lad Prabhakar1-3/+8
formats Up until now the VIN was capable to convert any of its supported input mbus formats to any of it's supported output pixel formats. With the addition of RAW formats this is no longer true. This patch invalidates the pipeline by adding a check if given vin input format can be converted to supported output pixel format. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-05-06media: rcar-vin: Make use of V4L2_CAP_IO_MCNiklas Söderlund1-16/+24
Set the V4L2_CAP_IO_MC capability flag and remove the driver specific vidioc_enum_input, vidioc_g_input and vidioc_s_input callbacks for the media controller enabled part of the driver. Also add support mbus_code filtering for format enumeration. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-03-02media: Split v4l2_pipeline_pm_use into v4l2_pipeline_pm_{get, put}Ezequiel Garcia1-3/+3
Currently, v4l2_pipeline_pm_use() prototype is: int v4l2_pipeline_pm_use(struct media_entity *entity, int use) Where the 'use' argument shall only be set to '1' for enable/power-on, or to '0' for disable/power-off. The integer return is specified as only meaningful when 'use' is set to '1'. Let's enforce this semantic by splitting the function in two: v4l2_pipeline_pm_get and v4l2_pipeline_pm_put. This is done for several reasons. It makes the API easier to use (or harder to misuse). It removes the constraint on the values the 'use' argument shall take. Also, it removes the need to constraint the return value, by making v4l2_pipeline_pm_put void return. And last, it's more consistent with other kernel APIs, such as the runtime pm APIs, which makes the code more symmetric. Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-02-24media: media/platform: rename VFL_TYPE_GRABBER to _VIDEOHans Verkuil1-1/+1
'GRABBER' is a weird name, all other types map to the /dev device names. Rename to 'VIDEO' to be consistent with the other types. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-02-24media: rcar-vin: Add support for V4L2_FIELD_SEQ_{TB,BT}Niklas Söderlund1-0/+5
The hardware does not support capturing the field types V4L2_FIELD_SEQ_TB and V4L2_FIELD_SEQ_BT. To capture in these formats the driver needs to adjust the offset of the capture buffer and capture twice to each vb2 buffer. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-02-24media: rcar-vin: Limit NV12 availability to supported VIN channels onlyNiklas Söderlund1-1/+5
When adding support for NV12 it was overlooked that the pixel format is only supported on some VIN channels. Fix this by adding a check to only accept NV12 on the supported channels 0, 1, 4, 5, 8, 9, 12 and 13. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-02-24media: rcar-vin: Handle special pixel formats in a switchNiklas Söderlund1-5/+12
Before extending the special pixel format handling turn the multiple if statements into a switch. Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-01-23media: rcar-vin: Use correct pixel format when aligning formatNiklas Söderlund1-1/+1
When aligning the format the pixel format that is being processed shall be used to figure out alignment constraints, not the currently active pixel format. The alignment might be part of a try operation and shall not be effected by the active format. Fix this by looking at the correct pixel format. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2019-11-05media: rcar-vin: Add support for outputting NV12Niklas Söderlund1-6/+33
Most Gen3 boards can output frames in NV12 format, add support for this with a runtime check that the running hardware supports it. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2019-11-05media: rcar-vin: Do not enumerate unsupported pixel formatsNiklas Söderlund1-5/+15
If a pixel format is not supported by the hardware NULL is returned by rvin_format_from_pixel() for that fourcc. Verify that the pixel format is supported using this or skip it when enumerating. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2019-10-10media: rcar-vin: Create compose rectangle where it is usedNiklas Söderlund1-14/+11
The rectangle used to correct the compose settings when changing the format was created inside a helper function and not where it was used. This is confusing and makes the code harder to read, fix this. This cleanup is made possible due to refactoring elsewhere and there is no functional change. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-10media: rcar-vin: Rename wrongly named rectangleNiklas Söderlund1-10/+11
After recent refactoring the rectangle named crop no longer reflects it usage, to contain the source rectangle. Fix this by renaming it. There is no functional change. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-01media: rcar-vin: Add support for V4L2_FIELD_ALTERNATENiklas Söderlund1-18/+13
The hardware is capable to passing V4L2_FIELD_ALTERNATE to user-space. Allow users to request this field format but still default to using the hardware interlacer if alternating is not explicitly requested. Before this change a sensor providing data using alternate would be always combined to an interlaced frame. After this change the user can request to receive frames as alternate if the sensor provides it. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-01media: rcar-vin: Do not reset the crop and compose rectangles in s_fmtNiklas Söderlund1-2/+2
The crop and compose rectangles are reset when s_fmt is called resulting in potentially valid rectangles being lost when updating the format. Fix this by mapping the rectangles inside the new format. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-01media: rcar-vin: Rename rectangle holding the video source informationNiklas Söderlund1-16/+17
The variable to hold the video source information dimensions was poorly named 'source'. This is confusing as a lot of other members of structs share the same name with different purposes, rename it src_rect in preparation of refactoring code. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-10-01media: rcar-vin: Fix incorrect return statement in rvin_try_format()Niklas Söderlund1-1/+2
While refactoring code the return statement became corrupted, fix it by returning the correct return code. Reported-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Fixes: 897e371389e77514 ("media: rcar-vin: simplify how formats are set and reset" Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-08-13media: rcar-vin: Report correct image strideNiklas Söderlund1-1/+4
The image stride was adjusted when it was written to hardware and not when configuring the format. Calculate the correct stride value and report it to userspace. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-25media: rcar-vin: Always setup controls when opening video deviceNiklas Söderlund1-16/+16
Now that both Gen2 (video device centric) and Gen3 (media device centric) modes of the driver have controls it is required to always setup the controls when opening the devices. Remove the check which only calls v4l2_ctrl_handler_setup() for Gen2 and call it unconditionally. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-25media: rcar-vin: Add support for RGB formats with alpha componentNiklas Söderlund1-0/+8
The R-Car VIN module supports V4L2_PIX_FMT_ARGB555 and V4L2_PIX_FMT_ABGR32 pixel formats. Add the hardware register setup and allow the alpha component to be changed while streaming using the V4L2_CID_ALPHA_COMPONENT control. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> [hverkuil-cisco@xs4all.nl: fix checkpatch warning for macro VNDMR_A8BIT] Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-25media: rcar-vin: Centralize black listing of pixel formatsNiklas Söderlund1-11/+12
Instead of scattering black listing of pixel formats who are not supported on particular platforms move it to a central location. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-21media: rcar-vin: Merge Gen2 and Gen3 file operationsNiklas Söderlund1-83/+19
After the rework of the Gen2 file operations it's now trivial to merge the Gen2 and Gen3 versions. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-21media: rcar-vin: Fold rvin_initialize_device() into rvin_open()Niklas Söderlund1-16/+8
The function no longer serve a purpose as most tasks it performed have been refactored, fold what remains of it into the only caller. While at it add error checking for v4l2_ctrl_handler_setup(). Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-21media: rcar-vin: Merge helpers dealing with powering the parallel subdeviceNiklas Söderlund1-15/+5
The two power helpers are now only dealing with the parallel subdevice, merge them into a single rvin_power_parallel() helper to reduce code duplication. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-21media: rcar-vin: Move pm_runtime_{get,put} out of helpersNiklas Söderlund1-14/+21
The helpers rvin_power_{on,off} deal with both VIN and the parallel subdevice power. This makes it hard to merge the Gen2 and Gen3 open/release functions. Move the VIN power handling directly to the open/release functions to prepare for the merge. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-21media: rcar-vin: Do not sync subdevice format when opening the video deviceNiklas Söderlund1-25/+0
The format is already synced when the subdevice is bound, there is no need to do do it every time the video device is opened. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-21media: rcar-vin: Allow interrupting lock when trying to open the video deviceNiklas Söderlund1-1/+3
The user should be allowed to break waiting for the lock when opening the video device. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-21media: rcar-vin: Remove unneeded calls to pm_runtime_{enable, disable}Niklas Söderlund1-6/+1
Runtime PM is already enabled unconditionally when the driver is probed and disabled when it's removed. There is no point in doing it again for Gen2 when opening and closing the video device. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-21media: rcar-vin: Do not call pm_runtime_{resume,suspend}()Niklas Söderlund1-5/+0
The driver does not implement runtime resume and suspend function so there is little point in trying to call them. This is a leftover from the drivers soc_camera beginnings. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-03-01media: platform: fix several typosMauro Carvalho Chehab1-2/+2
Use codespell to fix lots of typos over frontends. Manually verified to avoid false-positives. Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Acked-by: Andrzej Pietrasiewicz <andrzejtp2010@gmail.com> Reviewed-by: Benoit Parrot <bparrot@ti.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Houlong Wei <houlong.wei@mediatek.com> Reviewed-by: Yong Deng <yong.deng@magewell.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-11-20media: vidioc_cropcap -> vidioc_g_pixelaspectHans Verkuil1-5/+5
Now vidioc_cropcap is only used to return the pixelaspect, so rename it accordingly. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-09-11media: use strscpy() instead of strlcpy()Mauro Carvalho Chehab1-4/+4
The implementation of strscpy() is more robust and safer. That's now the recommended way to copy NUL terminated strings. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-03media: rcar-vin: convert to SPDX identifiersKuninori Morimoto1-5/+1
Kconfig and Makefile doesn't have license line, thus, these are GPL-2.0 as default. All ohter files are GPL-2.0+ as original license. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-04media: rcar-vin: Rename 'digital' to 'parallel'Jacopo Mondi1-6/+6
As the term 'digital' is used all over the rcar-vin code in place of 'parallel', rename all the occurrencies. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Acked-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-11media: rcar-vin: fix crop and compose handling for Gen3Niklas Söderlund1-0/+6
When refactoring the Gen3 enablement series crop and compose handling where broken. This went unnoticed but can result in writing out side the capture buffer. Fix this by restoring the crop and compose to reflect the format dimensions as we have not yet enabled the scaler for Gen3. Fixes: 5e7c623632fcf8f5 ("media: rcar-vin: use different v4l2 operations in media controller mode") Reported-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-04-20media: rcar-vin: change name of video deviceNiklas Söderlund1-1/+1
The rcar-vin driver needs to be part of a media controller to support Gen3. Give each VIN instance a unique name so it can be referenced from userspace. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-04-20media: rcar-vin: force default colorspace for media centric modeNiklas Söderlund1-2/+20
The V4L2 specification clearly documents the colorspace fields as being set by drivers for capture devices. Using the values supplied by userspace thus wouldn't comply with the API. Until the API is updated to allow for userspace to set these Hans wants the fields to be set by the driver to fixed values. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-04-20media: rcar-vin: use different v4l2 operations in media controller modeNiklas Söderlund1-3/+155
When the driver runs in media controller mode it should not directly control the subdevice instead userspace will be responsible for configuring the pipeline. To be able to run in this mode a different set of v4l2 operations needs to be used. Add a new set of v4l2 operations to support operation without directly interacting with the source subdevice. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-04-20media: rcar-vin: move media bus configuration to struct rvin_devNiklas Söderlund1-1/+1
Bus configuration will once the driver is extended to support Gen3 contain information not specific to only the directly connected parallel subdevice. Move it to struct rvin_dev to show it's not always coupled to the parallel subdevice. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-04-20media: rcar-vin: cache video standardNiklas Söderlund1-2/+8
At stream on time the driver should not query the subdevice for which standard are used. Instead it should be cached when userspace sets the standard and used at stream on time. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-04-20media: rcar-vin: simplify how formats are set and resetNiklas Söderlund1-69/+51
With the recent cleanup of the format code to prepare for Gen3 it's possible to simplify the Gen2 format code path as well. Clean up the process by defining two functions to handle the set format and reset of format when the standard is changed. While at it replace the driver local struct rvin_source_fmt with a struct v4l2_rect as all it's used for is keep track of the source dimensions. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-04-20media: rcar-vin: break out format alignment and checkingNiklas Söderlund1-37/+48
Part of the format alignment and checking can be shared with the Gen3 format handling. Break that part out to a separate function. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-04-20media: rcar-vin: align pixelformat checkNiklas Söderlund1-11/+3
If the pixelformat is not supported it should not fail but be set to something that works. While we are at it move the two different checks of the pixelformat to the same statement. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-04-20media: rcar-vin: update bytesperline and sizeimage calculationNiklas Söderlund1-8/+2
Remove over complicated logic to calculate the value for bytesperline and sizeimage that was carried over from the soc_camera port. There is no need to find the max value of bytesperline and sizeimage from user-space as they are set to 0 before the max_t() operation. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-04-20media: rcar-vin: fix handling of single field frames (top, bottom and ↵Niklas Söderlund1-31/+9
alternate fields) There was never proper support in the VIN driver to deliver ALTERNATING field format to user-space, remove this field option. The problem is that ALTERNATING field order requires the sequence numbers of buffers returned to userspace to reflect if fields were dropped or not, something which is not possible with the VIN drivers capture logic. The VIN driver can still capture from a video source which delivers frames in ALTERNATING field order, but needs to combine them using the VIN hardware into INTERLACED field order. Before this change if a source was delivering fields using ALTERNATE the driver would default to combining them using this hardware feature. Only if the user explicitly requested ALTERNATE field order would incorrect frames be delivered. The height should not be cut in half for the format for TOP or BOTTOM fields settings. This was a mistake and it was made visible by the scaling refactoring. Correct behavior is that the user should request a frame size that fits the half height frame reflected in the field setting. If not the VIN will do its best to scale the top or bottom to the requested format and cropping and scaling do not work as expected. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-04-20media: rcar-vin: set a default field to fallback onNiklas Söderlund1-7/+6
If the field is not supported by the driver it should not try to keep the current field. Instead it should set it to a default fallback. Since trying a format should always result in the same state regardless of the current state of the device. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-04-20media: rcar-vin: all Gen2 boards can scale simplify logicNiklas Söderlund1-14/+11
The logic to preserve the requested format width and height are too complex and come from a premature optimization for Gen3. All Gen2 SoC can scale and the Gen3 implementation will not use these functions at all so simply preserve the width and height when interacting with the subdevice much like the field is preserved simplifies the logic quite a bit. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-25 15:42:27 +0300