summaryrefslogtreecommitdiff
path: root/drivers/media/platform/rcar-vin/rcar-csi2.c
AgeCommit message (Collapse)AuthorFilesLines
2021-11-18media: rcar-csi2: Add checking to rcsi2_start_receiver()Nadezda Lutovinova1-0/+2
[ Upstream commit fc41665498332ad394b7db37f23e9394096ddc71 ] If rcsi2_code_to_fmt() return NULL, then null pointer dereference occurs in the next cycle. That should not be possible now but adding checking protects from future bugs. The patch adds checking if format is NULL. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Nadezda Lutovinova <lutovinova@ispras.ru> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-09-27media: rcar-csi2: Extend RAW8 support to all RGB layoutsNiklas Söderlund1-0/+3
Extend the list of supported formats to include all RGB layouts of RAW8. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-09-26media: rcar-csi2: Enable support for R8A774E1Lad Prabhakar1-0/+4
Add the MIPI CSI-2 driver support for RZ/G2H (R8A774E1) SoC. The CSI-2 module of RZ/G2H is similar to R-Car H3. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-09-10media: rcar-csi2: Allocate v4l2_async_subdev dynamicallyLaurent Pinchart1-14/+10
v4l2_async_notifier_add_subdev() requires the asd to be allocated dynamically, but the rcar-csi2 driver embeds it in the rcar_csi2 structure. This causes memory corruption when the notifier is destroyed at remove time with v4l2_async_notifier_cleanup(). Fix this issue by registering the asd with v4l2_async_notifier_add_fwnode_subdev(), which allocates it dynamically internally. Fixes: 769afd212b16 ("media: rcar-csi2: add Renesas R-Car MIPI CSI-2 receiver driver") Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-08-18media: rcar-csi2: Negotiate data lanes numberJacopo Mondi1-7/+68
Use the newly introduced get_mbus_config() subdevice pad operation to retrieve the remote subdevice MIPI CSI-2 bus configuration and configure the number of active data lanes accordingly. In order to be able to call the remote subdevice operation cache the index of the remote pad connected to the single CSI-2 input port. Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-07-04media: rcar-csi2: Rename confirm_start() to phy_post_init() to match its usageNiklas Söderlund1-7/+7
Since the driver was picked-up the starting of the PHY have changed quiet a bit. An artifact of these changes is the now poorly named callback confirm_start(). It used to confirm start of the PHY but now performs post PHY start initialization, rename it to phy_post_init() to reflect this. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Acked-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-07-04media: rcar-csi2: Add support for MEDIA_BUS_FMT_SRGGB8_1X8 formatLad Prabhakar1-0/+1
This patch adds support for MEDIA_BUS_FMT_SRGGB8_1X8 format for CSI2 input. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-05-05media: rcar-csi2: Fix comment of VCDT/VCDT2 registerKoji Matsuoka1-2/+2
According to latest H/W manual v1.50, the description of channel number in the VCDT/VCDT2 register is decremented by one. Therefore, this patch fixes it about comment. Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2019-11-05media: rcar-csi2: Enable support for R8A774B1Biju Das1-0/+4
Add the MIPI CSI-2 driver support for RZ/G2N(R8A774B1) SoC. The CSI-2 module of RZ/G2N is similar to R-Car M3-N. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2019-05-28media: rcar-csi2: Fix coccinelle warning for PTR_ERR_OR_ZERO()Niklas Söderlund1-3/+1
Use the PTR_ERR_OR_ZERO() macro instead of construct: if (IS_ERR(foo)) return PTR_ERR(foo); return 0; Fixes: 3ae854cafd76 ("rcar-csi2: Use standby mode instead of resetting") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-05-08media: rcar-csi2: Propagate the FLD signal for NTSC and PALNiklas Söderlund1-3/+13
Depending on which video standard is used the driver needs to setup the hardware to correctly handle fields. If stream is identified as NTSC or PAL setup field detection and propagate the field detection signal. Later versions of the datasheet have been updated to make it clear that FLD register should be set to 0 when dealing with non-interlaced field formats. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-05-08media: rcar-csi2: restart CSI-2 link if error is detectedNiklas Söderlund1-1/+51
Restart the CSI-2 link if the CSI-2 receiver detects an error during reception. The driver did nothing when a link error happened and the data flow simply stopped without the user knowing why. Change the driver to try and recover from errors by restarting the link and informing the user that something is not right. For obvious reasons it's not possible to recover from all errors (video source disconnected for example) but in such cases the user is at least informed of the error and the same behavior of the stopped data flow is retained. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-04-22media: rcar-csi2: Move setting of Field Detection Control RegisterNiklas Söderlund1-2/+2
Later datasheet versions (rev 1.00) clarifies that the FLD register should be set after LINKCNT. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-04-22media: rcar-csi2: Update start procedure for H3 ES2Niklas Söderlund1-6/+29
Latest information from hardware engineers reveals that H3 ES2 and ES3 behave differently when working with link speeds bellow 250 Mpbs. Add a SoC match for H3 ES2.* and use the correct startup sequence. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-04-22media: rcar-csi2: Update V3M and E3 start procedureNiklas Söderlund1-5/+5
The latest datasheet (rev 1.50) updates the start procedure for V3M and E3. Update the driver to match these changes. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-04-22media: rcar-csi2: Use standby mode instead of resettingNiklas Söderlund1-26/+41
Later versions of the datasheet updates the reset procedure to more closely resemble the standby mode. Update the driver to enter and exit the standby mode instead of resetting the hardware before and after streaming is started and stopped. This replaces the software reset (SRST.SRST) control. While at it break out the full start and stop procedures from rcsi2_s_stream() into the existing helper functions. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-03-19media: rcar-csi2: Enable support for r8a774a1Biju Das1-0/+4
Add the MIPI CSI-2 driver support for RZ/G2M(r8a774a1) SoC. The CSI-2 module of RZ/G2M is similar to R-Car M3-W. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Acked-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-01-16media: rcar-csi2: Add support for RZ/G2EFabrizio Castro1-0/+4
According to the RZ/G2 User's manual, RZ/G2E and R-Car E3 CSI-2 blocks are identical, therefore use R-Car E3 definitions to add RZ/G2E support. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-01-16media: rcar-csi2: Fix PHTW table values for E3/V3MJacopo Mondi1-31/+31
The PHTW selection algorithm implemented in rcsi2_phtw_write_mbps() checks for lower bound of the interval used to match the desired bandwidth. Use that in place of the currently used upper bound. Fixes: 10c08812fe60 ("media: rcar: rcar-csi2: Update V3M/E3 PHTW tables") Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Acked-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-12-07media: rcar-csi2: add R8A77980 supportSergei Shtylyov1-0/+11
Add the R-Car V3H (AKA R8A77980) SoC support to the R-Car CSI2 driver. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-11-23media: rcar-csi2: Handle per-SoC number of channelsJacopo Mondi1-3/+12
The R-Car CSI-2 interface has a number of selectable 'channels' that provides pixel data to the VINs during image acquisition. Each channel can be used to match a CSI-2 data type and a CSI-2 virtual channel to be routed to output path. Different SoCs have different number of channels, with R-Car E3 being the notable exception supporting only 2 of them. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-11-23media: rcar: rcar-csi2: Update V3M/E3 PHTW tablesJacopo Mondi1-31/+31
Update PHTW tables for V3M and E3 SoCs to the latest datasheet release (R-Car Series, 3rd Generation manual rev1.00 20181017). Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-11-23media: rcar-csi2: Add R8A77990 supportJacopo Mondi1-0/+9
Add support for R-Car E3 R8A77965 to R-Car CSI-2 driver. Based on the experimental patch from Magnus Damm. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-10-04media: v4l: fwnode: Initialise the V4L2 fwnode endpoints to zeroSakari Ailus1-1/+1
Initialise the V4L2 fwnode endpoints to zero in all drivers using v4l2_fwnode_endpoint_parse(). This prepares for setting default endpoint flags as well as the bus type. Setting bus type to zero will continue to guess the bus among the guessable set (parallel, Bt.656 and CSI-2 D-PHY). Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Tested-by: Steve Longerbeam <steve_longerbeam@mentor.com> Tested-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-10-04media: v4l: mediabus: Recognise CSI-2 D-PHY and C-PHYSakari Ailus1-1/+1
The CSI-2 bus may use either D-PHY or C-PHY. Make this visible in media bus enum. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Tested-by: Steve Longerbeam <steve_longerbeam@mentor.com> Tested-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-10-04media: platform: Switch to v4l2_async_notifier_add_subdevSteve Longerbeam1-9/+13
Switch all media platform drivers to call v4l2_async_notifier_add_subdev() to add asd's to a notifier, in place of referencing the notifier->subdevs[] array. These drivers also must now call v4l2_async_notifier_init() before adding asd's to their notifiers. There may still be cases where a platform driver maintains a list of asd's that is a duplicate of the notifier asd_list, in which case its possible the platform driver list can be removed, and can reference the notifier asd_list instead. One example of where a duplicate list has been removed in this patch is xilinx-vipp.c. If there are such cases remaining, those drivers should be optimized to remove the duplicate platform driver asd lists. None of the changes to the platform drivers in this patch have been tested. Verify that the async subdevices needed by the platform are bound at load time, and that the driver unloads and reloads correctly with no memory leaking of asd objects. Suggested-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-27media: rcar-csi2: update stream start for V3MNiklas Söderlund1-6/+14
Latest errata document updates the start procedure for V3M. This change in addition to adhering to the datasheet update fixes capture on early revisions of V3M. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-28media: rcar-csi2: set default format if a unsupported one is requestedNiklas Söderlund1-1/+1
Instead of failing the set_fmt() if a unsupported format is requested set a default one and return the changed format to the user. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reported-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-28media: rcar-csi2: add Renesas R-Car MIPI CSI-2 receiver driverNiklas Söderlund1-0/+1084
A V4L2 driver for Renesas R-Car MIPI CSI-2 receiver. The driver supports the R-Car Gen3 SoCs where separate CSI-2 hardware blocks are connected between the video sources and the video grabbers (VIN). Driver is based on a prototype by Koji Matsuoka in the Renesas BSP. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-07 02:02:24 +0300