summaryrefslogtreecommitdiff
path: root/drivers/media/platform/coda
AgeCommit message (Collapse)AuthorFilesLines
2019-03-01media: platform: fix several typosMauro Carvalho Chehab1-1/+1
Use codespell to fix lots of typos over frontends. Manually verified to avoid false-positives. Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Acked-by: Andrzej Pietrasiewicz <andrzejtp2010@gmail.com> Reviewed-by: Benoit Parrot <bparrot@ti.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Houlong Wei <houlong.wei@mediatek.com> Reviewed-by: Yong Deng <yong.deng@magewell.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-01-21media: coda: fix decoder capture buffer payloadPhilipp Zabel1-16/+2
It is not correct to calculate decoder capture payload dynamically from the decoded frame width and height reported by the firmware. These tell us what the decoder wrote into the internal framebuffers. The rotator or VDOA always write the full sizeimage when copying the previously decoded frame from the internal framebuffers into the capture queue. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-01-21media: coda: use macroblock tiling on CODA960 onlyPhilipp Zabel1-1/+1
Coda7541 and earlier do not support macroblock tiling. They do support the NV12 format, though. Enable macroblock tiling for NV12 only on CODA960. This fixes crashes when trying to use NV12 support on CodaHx4. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-01-16media: coda: Add control for h.264 chroma qp index offsetPhilipp Zabel3-1/+9
Allow to set a fixed quantization parameter offset between luma and chroma in the h.264 encoder. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-01-16media: coda: Add control for h.264 constrained intra predictionPhilipp Zabel3-1/+10
Allow to enable constrained intra prediction in the h.264 encoder. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-12-07media: coda: fix H.264 deblocking filter controlsPhilipp Zabel4-22/+20
Add support for the third loop filter mode V4L2_MPEG_VIDEO_H264_LOOP_FILTER_MODE_DISABLED_AT_SLICE_BOUNDARY, and fix V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_ALPHA and V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_BETA controls. The filter offset controls are signed values in the -6 to 6 range and are stored into the slice header fields slice_alpha_c0_offset_div2 and slice_beta_offset_div2. The actual filter offsets FilterOffsetA/B are double their value, in range of -12 to 12. Rename variables to more closely match the nomenclature in the H.264 specification. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-11-23media: coda: debug output when setting visible size via crop selectionPhilipp Zabel1-0/+3
In addition to the S_FMT debug output, S_SELECTION (SEL_TGT_CROP) is relevant to determine encoded size. Add debug output for it. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-11-23media: coda: normalise debug outputPhilipp Zabel3-76/+65
Consistently add the context index to debug output, which otherwise is impossible to make sense of when two contexts are running concurrently. For this purpose, add a convenience macro coda_dbg(). Use the function name with the coda_ prefix stripped as keyword where applicable, and consistently use vid-out and vid-cap names for the queues. Add sequence counters to the decoder job finished message and correctly indicate B frames. Add a start streaming message to complement the stop streaming message and a start encoding message to complement the existing start decoding message. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-11-23media: coda: improve queue busy error messagePhilipp Zabel1-1/+2
Use v4l2_type_names to indicate which of the two queues is busy. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-11-23media: coda: print SEQ_INIT error code as hex valueMichael Tretter1-1/+1
The error code looks much more like a bit field than an error value. Print it as hex rather than decimal. Signed-off-by: Michael Tretter <m.tretter@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-11-23media: coda: fail S_SELECTION for read-only targetsPhilipp Zabel1-22/+29
v4l2-compliance complains if S_SELECTION returns 0 for read-only targets. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-11-23media: coda: never set infinite timeperframePhilipp Zabel1-3/+3
v4l2-compliance complains if G_PARM returns 0 in the denominator. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-11-23media: coda: implement ENUM_FRAMEINTERVALSPhilipp Zabel1-0/+34
v4l2-compliance complains about S_PARM being supported, but not ENUM_FRAMEINTERVALS. Report a continuous frame interval even though the hardware only supports 16-bit numerator and denominator, with min/max values that can be programmed into the mailbox registers. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-11-23media: coda: set V4L2_CAP_TIMEPERFRAME flag in coda_s_parmPhilipp Zabel1-0/+1
The flag is already set in coda_g_parm, but v4l2-compliance complains about it not being set during S_PARM. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-11-23media: coda: don't disable IRQs across buffer meta handlingLucas Stach2-15/+9
The CODA driver uses threaded IRQs only, so there is nothing happening in hardirq context that could interfere with the buffer meta handling. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-11-23media: coda: remove unused instances listPhilipp Zabel2-11/+0
The per-device instance list is unused, remove it. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-11-23media: coda: reduce minimum frame size to 48x16 pixels.Philipp Zabel1-2/+2
Three macroblocks seem to be the minimum resolution that can be encoded and decoded by the CODA960 h.264 codec. Picture run commands fail for smaller resolutions. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-11-23media: coda: limit queueing into internal bitstream bufferLucas Stach1-0/+28
The ringbuffer used to hold the bitstream is very conservatively sized, as keyframes can get very large and still need to fit into this buffer. This means that the buffer is way oversized for the average stream to the extend that it will hold a few hundred frames when the video data is compressing well. The current strategy of queueing as much bitstream data as possible leads to large delays when draining the decoder. In order to keep the drain latency to a reasonable bound, try to only queue a full reorder window of buffers. We can't always hit this low target for very well compressible video data, as we might end up with less than the minimum amount of data that needs to be available to the bitstream prefetcher, so we must take this into account and allow more buffers to be queued in this case. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-11-23media: coda: always hold back decoder jobs until we have enough bitstream ↵Philipp Zabel2-5/+20
payload The bitstream prefetch unit reads data in 256 byte blocks with some kind of queueing. For the decoder to see data up to a desired position in the next run, the bitstream has to be filled for 2 256 byte blocks past that position aligned up to the next 256 byte boundary. This should make sure we never run into a buffer underrun condition if userspace does not supply new input buffers fast enough. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-11-23media: coda: store unmasked fifo position in metaPhilipp Zabel4-13/+11
Storing the unmasked kfifo->in position as meta->start and ->end allows to more easily compare a point past meta->end with the current kfifo->in. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-11-23media: coda: fix memory corruption in case more than 32 instances are openedPhilipp Zabel2-17/+12
The ffz() return value is undefined if the instance mask does not contain any zeros. If it returned 32, the following set_bit would corrupt the debugfs_root pointer. Switch to IDA for context index allocation. This also removes the artificial 32 instance limit for all except CodaDx6. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-09-24media: coda: don't overwrite h.264 profile_idc on decoder instanceLucas Stach1-1/+2
On a decoder instance, after the profile has been parsed from the stream __v4l2_ctrl_s_ctrl() is called to notify userspace about changes in the read-only profile control. This ends up calling back into the CODA driver where a missing check on the s_ctrl caused the profile information that has just been parsed from the stream to be overwritten with the default baseline profile. Later on the driver fails to enable frame reordering, based on the wrong profile information. Fixes: 347de126d1da (media: coda: add read-only h.264 decoder profile/level controls) Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-09-24media: coda: remove redundant null pointer check before of_node_putzhong jiang1-2/+1
of_node_put has taken the null pointer check into account. So it is safe to remove the duplicated check before of_node_put. Signed-off-by: zhong jiang <zhongjiang@huawei.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-09-11media: use strscpy() instead of strlcpy()Mauro Carvalho Chehab1-4/+4
The implementation of strscpy() is more robust and safer. That's now the recommended way to copy NUL terminated strings. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-08-18Merge tag 'char-misc-4.19-rc1' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the bit set of char/misc drivers for 4.19-rc1 There is a lot here, much more than normal, seems like everyone is writing new driver subsystems these days... Anyway, major things here are: - new FSI driver subsystem, yet-another-powerpc low-level hardware bus - gnss, finally an in-kernel GPS subsystem to try to tame all of the crazy out-of-tree drivers that have been floating around for years, combined with some really hacky userspace implementations. This is only for GNSS receivers, but you have to start somewhere, and this is great to see. Other than that, there are new slimbus drivers, new coresight drivers, new fpga drivers, and loads of DT bindings for all of these and existing drivers. All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (255 commits) android: binder: Rate-limit debug and userspace triggered err msgs fsi: sbefifo: Bump max command length fsi: scom: Fix NULL dereference misc: mic: SCIF Fix scif_get_new_port() error handling misc: cxl: changed asterisk position genwqe: card_base: Use true and false for boolean values misc: eeprom: assignment outside the if statement uio: potential double frees if __uio_register_device() fails eeprom: idt_89hpesx: clean up an error pointer vs NULL inconsistency misc: ti-st: Fix memory leak in the error path of probe() android: binder: Show extra_buffers_size in trace firmware: vpd: Fix section enabled flag on vpd_section_destroy platform: goldfish: Retire pdev_bus goldfish: Use dedicated macros instead of manual bit shifting goldfish: Add missing includes to goldfish.h mux: adgs1408: new driver for Analog Devices ADGS1408/1409 mux dt-bindings: mux: add adi,adgs1408 Drivers: hv: vmbus: Cleanup synic memory free path Drivers: hv: vmbus: Remove use of slow_virt_to_phys() Drivers: hv: vmbus: Reset the channel callback in vmbus_onoffer_rescind() ...
2018-07-27media: coda: add SPS fixup code for frame sizes that are not multiples of 16Philipp Zabel3-0/+339
The CODA7541 firmware does not set the SPS frame cropping fields to properly describe coded h.264 streams with frame sizes that are not a multiple of the macroblock size. This adds RBSP parsing code and a SPS fixup routine to manually replace the cropping information in the headers produced by the firmware with the correct values. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> [hans.verkuil@cisco.com: added explanation of SPS RBSP to comment] Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-27media: coda: let CODA960 firmware set frame cropping in SPS headerPhilipp Zabel1-0/+19
When encoding h.264, if visible resolution is not aligned to macroblock size, frame cropping has to be set in the SPS header to produce correct streams. The CODA960 firmware can do this on its own if asked to. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-25media: coda: add missing h.264 levelsPhilipp Zabel1-0/+3
This enables reordering support for h.264 main profile level 4.2, 5.0, and 5.1 streams. Even though we likely can't play back such streams at full speed, we should still recognize them correctly. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-25media: coda: use encoder crop rectangle to set visible width and heightPhilipp Zabel2-17/+52
Allow to set a crop rectangle on the encoder output queue to set the visible resolution as required by the V4L2 codec API. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-25media: coda: streamline framebuffer size calculation a bitPhilipp Zabel1-9/+5
Remove the intermediate width and height variables, the calculation is simple enough. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-25media: coda: move framebuffer size calculation out of loopPhilipp Zabel1-6/+7
All internal YCbCr frame buffers are the same size, calculate ycbcr_size once before the allocation loop. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-07headers: separate linux/mod_devicetable.h from linux/platform_device.hRandy Dunlap1-0/+1
At over 4000 #includes, <linux/platform_device.h> is the 9th most #included header file in the Linux kernel. It does not need <linux/mod_devicetable.h>, so drop that header and explicitly add <linux/mod_devicetable.h> to source files that need it. 4146 #include <linux/platform_device.h> After this patch, there are 225 files that use <linux/mod_devicetable.h>, for a reduction of around 3900 times that <linux/mod_devicetable.h> does not have to be read & parsed. 225 #include <linux/mod_devicetable.h> This patch was build-tested on 20 different arch-es. It also makes these drivers SubmitChecklist#1 compliant. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kbuild test robot <lkp@intel.com> # drivers/media/platform/vimc/ Reported-by: kbuild test robot <lkp@intel.com> # drivers/pinctrl/pinctrl-u300.c Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-04media: coda: mark CODA960 firmware version 2.1.9 as supportedPhilipp Zabel1-0/+1
This patch adds the i.MX6 CODA960 firmware versions 2.1.9 (revision 32515) to the list of supported firmware versions. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-04media: coda: jpeg: explicitly disable thumbnails in SEQ_INITPhilipp Zabel2-0/+3
Explicitly clear DEC_SEQ_JPG_THUMB_EN during sequence initialization. Not clearing the register does not cause problems, since the only other codec (MPEG-4 decode) that writes to this register happens to always write 0 as well. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-04media: coda: jpeg: only queue two buffers into the bitstream for JPEG on ↵Philipp Zabel1-3/+4
CODA7541 Padding the bitstream buffer is not enough to reliably avoid prefetch failures. Picture runs with the next buffer's header already visible to the CODA7541 succeed much more reliably, so always queue two JPEG frames into the bitstream buffer. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-04media: coda: jpeg: allow non-JPEG colorspacePhilipp Zabel1-2/+0
The hardware codec is not colorspace aware. We should trust userspace to set the correct colorimetry information on the OUTPUT queue and mirror the exact same setting on the CAPTURE queue. There is no reason to restrict colorspace to JPEG for JPEG images, if userspace injects the correct colorspace information into the JPEG headers after encoding. Fixes: b14ac545688d ("[media] coda: improve colorimetry handling") Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-04media: coda: clear hold flag on streamoffPhilipp Zabel1-0/+1
If new buffers are queued after streamoff, the flag will be cleared anyway, so this is mostly for the purpose of correctness. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-04media: coda: fix reorder detection for unknown levelsPhilipp Zabel1-21/+4
Whether reordering should be enabled only depends on the h.264 profile. Stop parsing the level and drop the debug message, profile and level can now be determined via read-only decoder controls. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-04media: coda: add read-only h.264 decoder profile/level controlsPhilipp Zabel2-1/+116
The decoder profile/level controls initially can be used to determine supported profiles and levels. The values are set for a given stream once the headers are parsed. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-04media: coda: fix encoder source stridePhilipp Zabel1-1/+2
The encoder picture run command takes a picture source stride parameter. This must be set to the output queue's bytesperline, not width. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-06-28media: mem2mem: Remove unused v4l2_m2m_ops .lock/.unlockEzequiel Garcia1-22/+4
Commit f1a81afc98e3 ("[media] m2m: fix bad unlock balance") removed the last use of v4l2_m2m_ops.lock and v4l2_m2m_ops.unlock hooks. They are not actually used anymore. Remove them. Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-09media: coda: set colorimetry on coded queuePhilipp Zabel1-1/+16
Do not set context colorimetry on the raw (OUTPUT) queue for encoders. Always set colorimetry on the coded queue (CAPTURE for encoders, OUTPUT for decoders). This also skips propagation of capture queue format and selection rectangle on S_FMT(OUTPUT) to the CAPTURE queue for encoders. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-09media: coda: do not try to propagate format if capture queue busyPhilipp Zabel1-0/+14
The driver helpfully resets the capture queue format and selection rectangle whenever output format is changed. This only works while the capture queue is not busy. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-05-09media: coda: reuse coda_s_fmt_vid_cap to propagate format in coda_s_fmt_vid_outPhilipp Zabel1-13/+1
Instead of duplicating the same code, call into coda_s_fmt_vid_out to propagate the output format to the capture queue. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-02-26media: coda: bump maximum number of internal framebuffers to 19Philipp Zabel1-1/+1
While the h.264 standard only allows up to 16 reference frames, the CODA firmware needs two more buffers: one to hold the currently decoded frame and one for the display frame. Adding the framebuffer needed by the driver for VDOA operation brings the total to a maximum of 19 internal framebuffers. Lift the current maximum of 17 internal framebuffers to allow playback of high profile streams that require more than 14 reference frames. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-26media: coda: Add i.MX51 (CodaHx4) supportPhilipp Zabel3-16/+75
Add support for the CodaHx4 VPU used on i.MX51. Decoding h.264, MPEG-4, and MPEG-2 video works, as well as encoding h.264. MPEG-4 encoding is not enabled, it currently produces visual artifacts. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> [hans.verkuil@cisco.com: fix (bogus) sparse warning about uninited me_bits] Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-01-04media: replace all <spaces><tab> occurrencesMauro Carvalho Chehab1-1/+1
There are a lot of places where sequences of space/tabs are found. Get rid of all spaces before tabs. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-19media: coda/imx-vdoa: Remove irq member from vdoa_data structFabio Estevam1-4/+4
The 'irq' member of the vdoa_data struct is only used inside probe, so there is no need for it. Use a local variable 'ret' instead. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-18media: coda: use correct offset for mpeg4 decoder mvcol bufferPhilipp Zabel1-9/+7
The mvcol buffer needs to be placed behind the chroma plane(s) when decoding MPEG-4, same as for the h.264 decoder. Use the real offset with the required rounding. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-18media: coda: allocate space for mpeg4 decoder mvcol bufferPhilipp Zabel1-2/+4
The MPEG-4 decoder mvcol buffer was registered, but its size not added to a frame buffer allocation. This could cause the decoder to write past the end of the allocated buffer for large frame sizes. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-03-18 10:17:50 +0300