| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
[ Upstream commit 697a252bb2ea414cc1c0b4cf4e3d94a879eaf162 ]
The imx219/imx708 sensors frequently generate a single corrupt frame
(image or embedded data) when the sensor first starts. This can either
be a missing line, or invalid samples within the line. This only occurrs
using the upstream Unicam kernel driver.
Disabling trigger mode elimiates this corruption. Since trigger mode is
a legacy feature copied from the firmware driver and not expected to be
needed, remove it. Tested on the Raspberry Pi cameras and shows no ill
effects.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
The bcm2835-unicam driver calls the clk_set_min_rate() function, which
is declared but not implemented on platforms that don't provide
COMMON_CLK. This causes linkage failures with some configurations.
Fix it by depending on COMMON_CLK. This only slightly restricts
compilation testing, but not usage of the driver as all platforms on
which the hardware can be found provide COMMON_CLK.
Fixes: 392cd78d495f ("media: bcm2835-unicam: Add support for CCP2/CSI2 camera interface")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202405112243.2MLRT7li-lkp@intel.com/
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
The media_pad_remote_pad_unique() function returns error pointers, not
NULL. Update the check accordingly.
Fixes: 392cd78d495f ("media: bcm2835-unicam: Add support for CCP2/CSI2 camera interface")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/fbbe7862-2820-44eb-81cb-7f33b99cca35@moroto.mountain
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
platform_get_irq() already prints an error for us.
Fix this cocci warning:
drivers/media/platform/broadcom/bcm2835-unicam.c:2664:2-9: line 2664 is redundant because platform_get_irq() already prints an error
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://lore.kernel.org/r/20240506-fix-broad-v2-2-e6a2a5c0d609@chromium.org
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
platform_get_irq() cannot return the value 0. It will either return a non-zero
irq or a errcode.
If a errcode is returned, we need to populate the error code upwards. It will
give a more accurate reason of why it failed to the caller, who might decide
to retry later.
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20240506-fix-broad-v2-1-e6a2a5c0d609@chromium.org
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20240506100917.1544174-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The unicam driver uses the v4l2_subdev structure. Include the
corresponding header instead of relying on indirect includes.
Closes: https://lore.kernel.org/oe-kbuild-all/202404302324.8aTC84kE-lkp@intel.com/
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The driver can only match the device vide the DT table, so the table
should always be used, of_match_ptr does not make sense here.
It fixes this warning:
drivers/media/platform/broadcom/bcm2835-unicam.c:2724:34: warning: ‘unicam_of_match’ defined but not used [-Wunused-const-variable=]
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Add a driver for the Unicam camera receiver block on BCM283x processors.
It is represented as two video device nodes: unicam-image and
unicam-embedded which are connected to an internal subdev (named
unicam-subdev) in order to manage streams routing.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Co-developed-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Co-developed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Co-developed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
[Sakari Ailus: Squash fixes by Laurent.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
