summaryrefslogtreecommitdiff
path: root/drivers/media/dvb/siano/sms-cards.h
AgeCommit message (Collapse)AuthorFilesLines
2010-08-02V4L/DVB: sms: Convert IR support to use the Remote Controller coreMauro Carvalho Chehab1-1/+1
Rewrites the siano IR implementation. The previous implementation were non-standard. As such, it has issues if more than one device registers IR, as there used to have some static constants used during protocol decoding phase. Also, it used to implement its on RAW decoder, and only for RC5. The new code uses RC core subsystem for handling IR. This brings several new features to the driver, including: - Allow to dynamically replace the IR keycodes; - Supports all existing raw decoders (JVC, NEC, RC-5, RC-6, SONY); - Supports lirc dev; - Doesn't have race conditions when more than one sms IR is registered; - The code size for the IR implementation is very small; - it exports the IR features via /sys/class/rc. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13380): sms-cards: make id unsigned in sms_get_board()Roel Kluin1-1/+1
Make id signed so we can't get an invalid pointer when we pass a negative id. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-17V4L/DVB (11887): Siano: smscards - add board (target) eventsUri Shkolnik1-0/+24
Add events handling for targets. All board-specific (target specific) should reside here. Signed-off-by: Uri Shkolnik <uris@siano-ms.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-17V4L/DVB (11883): Siano: cards - add two additional (USB) devicesUri Shkolnik1-0/+2
Add two additional USB targets, add these to the 'cards' modules and to the 'smsusb' module. Signed-off-by: Uri Shkolnik <uris@siano-ms.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-17V4L/DVB (11815): Siano: bind infra-red componentUri Shkolnik1-0/+4
Add the infra-red to the makefile and declare the assignment in the cards components. [mchehab@redhat.com: Fixed a few trivial merge conflicts] Signed-off-by: Uri Shkolnik <uris@siano-ms.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-17V4L/DVB (11814): Siano: smscards - add gpio look-up tableUri Shkolnik1-0/+34
Add gpio look-up table for various requirements, any target may select any gpio and assign it to a function Signed-off-by: Uri Shkolnik <uris@siano-ms.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10752): sms1xxx: load smsdvb module automatically based on device idMichael Krufky1-0/+2
The smsdvb module was separated from the core and usb code. This change loads smsdvb automatically for driver configurations that depend on it. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10749): sms1xxx: move smsusb_id_table into smsusb.cMichael Krufky1-2/+0
Move the usb_device_id table to the smsusb module in preparation for the sms1xxx module to be split into sub-modules. This will allow the smsusb driver to start up automatically upon insertion of the USB device. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10746): sms1xxx: enable rf switch on Hauppauge Tiger devicesMichael Krufky1-1/+2
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (9737): sms1xxx: enable LNA control on Hauppauge WinTV MiniCardMichael Krufky1-1/+2
Power the LNA while the frontend is in use. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29V4L/DVB (9739): sms1xxx: enable signal quality indicator LEDs on Hauppauge ↵Michael Krufky1-0/+4
WinTV MiniStick Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29V4L/DVB (9736): sms1xxx: enable power LED on Hauppauge WinTV MiniStickMichael Krufky1-0/+2
Enable power LED while the frontend is in use. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29V4L/DVB (9735): sms1xxx: turn off LEDs after initialization of Hauppauge ↵Michael Krufky1-0/+5
WinTV MiniStick Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29V4L/DVB (9733): sms1xxx: add autodetection support for Hauppauge WinTV MiniCardMichael Krufky1-0/+1
add USB IDs for Hauppauge WinTV MiniCard DVB-T Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-04V4L/DVB (8722): sms1xxx: fix typo in license headerMichael Krufky1-1/+1
This should have read, "GNU General Public License version 2" rather than, "GNU General Public License version 3" This was actually a typo mass-blunder -- this is not a change in licence, as the code was always GPLv2. Signed-off-by: Uri Shkolnik <uris@siano-ms.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-07-20V4L/DVB (8313): sms1xxx: add support for Hauppauge WinTV-Nova-T-MiniStickMichael Krufky1-0/+4
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8302): sms1xxx: fix Siano board namesMichael Krufky1-5/+4
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8301): sms1xxx: add capability to define device-specific firmware ↵Michael Krufky1-1/+1
filenames Add the capability to define device-specific firmware filenames for the SMS1150, with a mechanism to fall back to the generic firmware if the device-specific firmware is not present. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8292): sms1xxx: add code to allow device-specific functionalityMichael Krufky1-0/+42
Set board ID in the usb_device_id table's driver_info field. Use board name when registering the dvb adapter. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>