summaryrefslogtreecommitdiff
path: root/drivers/media/dvb-frontends
AgeCommit message (Collapse)AuthorFilesLines
2014-11-04[media] af9033: continue polling unless critical IO errorAntti Palosaari1-1/+1
That case is not IO error, so better to jump out now, but still continue polling. Cc: Bimow Chen <Bimow.Chen@ite.com.tw> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-04[media] af9033: return 0.1 dB DVBv3 SNR for AF9030 familyAntti Palosaari1-18/+25
Previous patch changed both AF9030 and IT9130 SNR reporting from dB to relative. Restore AF9030 to old behavior as it has been always returning 0.1 dB value. Leave IT9130 relative as old IT9130 was returning relative values. Cc: Bimow Chen <Bimow.Chen@ite.com.tw> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-04[media] af9033: fix DVBv3 snr value not correct issueBimow Chen2-4/+62
Snr returns value not correct. Fix it. Signed-off-by: Bimow Chen <Bimow.Chen@ite.com.tw> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-04[media] af9033: improve read_signal_strength error handling slightlyAntti Palosaari1-4/+6
Check return status after each register access routine and avoid masking return status values. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-04[media] af9033: fix AF9033 DVBv3 signal strength measurementAntti Palosaari1-1/+5
Previous patch changes used signal strength firmware register from 0x800048 to 0x80004a in case of AF9033/AF9035 chip. In practice reported values were running upside-down, when RR strength increases reported value decreases and vice versa. That is because of 0x80004a returns values that are dBm scale, but negative RF strength dBm returned as positive number. 0x800048 returns 0-100, like percentage 0x80004a returns 0-255 dBm, without a negative sign So restore old measurement now. Cc: Bimow Chen <Bimow.Chen@ite.com.tw> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-04[media] af9033: fix DVBv3 signal strength value not correct issueBimow Chen2-8/+41
Register 0x800048 is not dB measure but relative scale. Fix it and conform to NorDig specifications. Signed-off-by: Bimow Chen <Bimow.Chen@ite.com.tw> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-04[media] si2168: do not print device is warm every-time when openedAntti Palosaari1-2/+1
It repeated "found a 'Silicon Labs Si2168' in warm state" everytime when device was opened. Message is aimed to point out firmware is downloaded, up and running. So print it only in case firmware download is performed. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03[media] m88ds3103: add support for the demod of M88RS6000nibble.max2-78/+345
M88RS6000 is the integrated chip, which includes tuner and demod. Its internal demod is similar with M88DS3103 except some registers definition. The main different part of this internal demod from others is its clock/pll generation IP block sitting inside the tuner die. So clock/pll functions should be configed through its tuner i2c bus, NOT its demod i2c bus. The demod of M88RS6000 need the firmware: dvb-demod-m88rs6000.fw firmware download link: http://www.dvbsky.net/download/linux/dvbsky-firmware.tar.gz Signed-off-by: Nibble Max <nibble.max@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03[media] stv090x: remove indent levels in stv090x_get_coldlock()Dan Carpenter1-82/+80
This code is needlessly complicated and checkpatch.pl complains that we go over the 80 characters per line limit. If we flip the "if (!lock) {" test to "if (lock) return;" then we can remove an indent level from the rest of the function. We can add two returns in the "if (state->srate >= 10000000) {" condition and move the else statement back an additional indent level. There is another "if (!lock) {" check which can be removed since we have already checked "lock" and know it is zero at this point. This second check on "lock" is also a problem because it sets off a static checker warning. I have reviewed this code for some time to see if something else was intended, but have concluded that it was simply an oversight and should be removed. Removing this duplicative check gains us an third indent level. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03[media] au8522: improve lock performance with ZeeVee modulatorsRichard Vollkommer1-7/+110
Improves lock performance with signals from the ZeeVee family of modulators. Signed-off-by: Richard Vollkommer <linux@hauppauge.com> Cc: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Michael Ira Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03[media] dvb-frontends/Kconfig: better describe Toshiba TC90522ほち1-1/+4
Toshiba TC90522 is wrongly categorized, fix it Signed-off-by: ほち, AreMa Inc <knightrider@are.ma> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-30[media] sp2: improve debug loggingOlli Salonen1-8/+11
Improve debugging output. Signed-off-by: Olli Salonen <olli.salonen@iki.fi> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-30[media] sp2: fix incorrect structOlli Salonen1-1/+1
Incorrect struct used in the SP2 driver. Reported-by: Max Nibble <nibble.max@gmail.com> Signed-off-by: Olli Salonen <olli.salonen@iki.fi> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-30[media] drxk: Fix debug printksMauro Carvalho Chehab1-3/+3
This patch partially reverts 0fb220f2a5cb. What happened is that the conversion of debug messages to use pr_debug() was a bad idea, because one needing to debug would need to both enable debug level via a modprobe parameter, and then to enable the dynamic printk's. So, for now, let's use printk() directly at dprintk(). Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-30[media] dib7000p: get rid of an unused argumentMauro Carvalho Chehab1-5/+4
dib7000p is for DVB, and not ISDB. So, there's no layer. That removes this compilation warning: drivers/media/dvb-frontends/dib7000p.c:1972: warning: 'i' is used uninitialized in this function Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-11Merge tag 'media/v3.18-rc1' of ↵Linus Torvalds42-628/+2977
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - new IR driver: hix5hd2-ir - the virtual test driver (vivi) was replaced by vivid, with has an almost complete set of features to emulate most v4l2 devices and properly test all sorts of userspace apps - the as102 driver had several bugs fixed and was properly split into a frontend and a core driver. With that, it got promoted from staging into mainstream - one new CI driver got added for CIMaX SP2/SP2HF (sp2 driver) - one new frontend driver for Toshiba ISDB-T/ISDB-S demod (tc90522) - one new PCI driver for ISDB-T/ISDB-S (pt3 driver) - saa7134 driver got support for go7007-based devices - added a new PCI driver for Techwell 68xx chipsets (tw68) - a new platform driver was added (coda) - new tuner drivers: mxl301rf and qm1d1c0042 - a new DVB USB driver was added for DVBSky S860 & similar devices - added a new SDR driver (hackrf) - usbtv got audio support - several platform drivers are now compiled with COMPILE_TEST - a series of compiler fixup patches, making sparse/spatch happier with the media stuff and removing several warnings, especially on those platform drivers that didn't use to compile on x86 - Support for several new modern devices got added - lots of other fixes, improvements and cleanups * tag 'media/v3.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (544 commits) [media] ir-hix5hd2: fix build on c6x arch [media] pt3: fix DTV FE I2C driver load error paths Revert "[media] media: em28xx - remove reset_resume interface" [media] exynos4-is: fix some warnings when compiling on arm64 [media] usb drivers: use %zu instead of %zd [media] pci drivers: use %zu instead of %zd [media] dvb-frontends: use %zu instead of %zd [media] s5p-mfc: Fix several printk warnings [media] s5p_mfc_opr: Fix warnings [media] ti-vpe: Fix typecast [media] s3c-camif: fix dma_addr_t printks [media] s5p_mfc_opr_v6: get rid of warnings when compiled with 64 bits [media] s5p_mfc_opr_v5: Fix lots of warnings on x86_64 [media] em28xx: Fix identation [media] drxd: remove a dead code [media] saa7146: remove return after BUG() [media] cx88: remove return after BUG() [media] cx88: fix cards table CodingStyle [media] radio-sf16fmr2: declare some structs as static [media] radio-sf16fmi: declare pnp_attached as static ...
2014-10-09Merge tag 'gpio-v3.18-1' of ↵Linus Torvalds1-7/+3
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO changes from Linus Walleij: "This is the bulk of GPIO changes for the v3.18 development cycle: - Increase the default ARCH_NR_GPIO from 256 to 512. This was done to avoid having a custom <asm/gpio.h> header for the x86 architecture - GPIO is custom and complicated enough as it is already! We want to move to a radix to store the descriptors going forward, and finally get rid of this fixed array size altogether. - Endgame patching of the gpio_remove() semantics initiated by Abdoulaye Berthe. It is not accepted by the system that the removal of a GPIO chip fails during eg reboot or shutdown, and therefore the return value has now painfully been refactored away. For special cases like GPIO expanders on a hot-pluggable bus like USB, we may later add some gpiochip_try_remove() call, but for the cases we have now, return values are moot. - Some incremental refactoring of the gpiolib core and ACPI GPIO library for more descriptor usage. - Refactor the chained IRQ handler set-up method to handle also threaded, nested interrupts and set up the parent IRQ correctly. Switch STMPE and TC3589x drivers to use this registration method. - Add a .irq_not_threaded flag to the struct gpio_chip, so that also GPIO expanders that block but are still not using threaded IRQ handlers. - New drivers for the ARM64 X-Gene SoC GPIO controller. - The syscon GPIO driver has been improved to handle the "DSP GPIO" found on the TI Keystone 2 SoC:s. - ADNP driver switched to use gpiolib irqchip helpers. - Refactor the DWAPB driver to support being instantiated from and MFD cell (platform device). - Incremental feature improvement in the Zynq, MCP23S08, DWAPB, OMAP, Xilinx and Crystalcove drivers. - Various minor fixes" * tag 'gpio-v3.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (52 commits) gpio: pch: Build context save/restore only for PM pinctrl: abx500: get rid of unused variable gpio: ks8695: fix 'else should follow close brace '}'' gpio: stmpe: add verbose debug code gpio: stmpe: fix up interrupt enable logic gpio: staticize xway_stp_init() gpio: handle also nested irqchips in the chained handler set-up gpio: set parent irq on chained handlers gpiolib: irqchip: use irq_find_mapping while removing irqchip gpio: crystalcove: support virtual GPIO pinctrl: bcm281xx: make Kconfig dependency more strict gpio: kona: enable only on BCM_MOBILE or for compile testing gpio, bcm-kona, LLVMLinux: Remove use of __initconst gpio: Fix ngpio in gpio-xilinx driver gpio: dwapb: fix pointer to integer cast gpio: xgene: Remove unneeded #ifdef CONFIG_OF guard gpio: xgene: Remove unneeded forward declation for struct xgene_gpio gpio: xgene: Fix missing spin_lock_init() gpio: ks8695: fix switch case indentation gpiolib: add irq_not_threaded flag to gpio_chip ...
2014-10-09Merge branch 'patchwork' into v4l_for_linusMauro Carvalho Chehab42-628/+2977
* patchwork: (544 commits) [media] ir-hix5hd2: fix build on c6x arch [media] pt3: fix DTV FE I2C driver load error paths Revert "[media] media: em28xx - remove reset_resume interface" [media] exynos4-is: fix some warnings when compiling on arm64 [media] usb drivers: use %zu instead of %zd [media] pci drivers: use %zu instead of %zd [media] dvb-frontends: use %zu instead of %zd [media] s5p-mfc: Fix several printk warnings [media] s5p_mfc_opr: Fix warnings [media] ti-vpe: Fix typecast [media] s3c-camif: fix dma_addr_t printks [media] s5p_mfc_opr_v6: get rid of warnings when compiled with 64 bits [media] s5p_mfc_opr_v5: Fix lots of warnings on x86_64 [media] em28xx: Fix identation [media] drxd: remove a dead code [media] saa7146: remove return after BUG() [media] cx88: remove return after BUG() [media] cx88: fix cards table CodingStyle [media] radio-sf16fmr2: declare some structs as static [media] radio-sf16fmi: declare pnp_attached as static ... Conflicts: Documentation/DocBook/media/v4l/compat.xml
2014-09-26[media] dvb-frontends: use %zu instead of %zdMauro Carvalho Chehab4-4/+4
size_t is unsigned. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-26[media] drxd: remove a dead codeMauro Carvalho Chehab1-6/+0
drivers/media/dvb-frontends/drxd_hard.c:2839 drxd_init() info: ignoring unreachable code. Firmware request/release is not at drxd_init. So, we can remove that dead code. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-26[media] si2168: add FE_CAN_MULTISTREAM into capsOlli Salonen1-1/+2
PLP selection was implemented for Si2168 last month (patchwork 25387). However, FE_CAN_MULTISTREAM was not added to dvb_frontend_ops of si2168. This patch adds FE_CAN_MULTISTREAM, which indicates that multiple PLP are supported. Signed-off-by: Olli Salonen <olli.salonen@iki.fi> Acked-by: Antti Palosaari <crope@iki.fi> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-26[media] tc90522: fix compilation on 32 bitsMauro Carvalho Chehab1-5/+6
drivers/built-in.o: In function `tc90522t_get_frontend': >> tc90522.c:(.text+0x260b64c): undefined reference to `__divdi3' >> tc90522.c:(.text+0x260b685): undefined reference to `__divdi3' >> tc90522.c:(.text+0x260b6bb): undefined reference to `__divdi3' >> tc90522.c:(.text+0x260b713): undefined reference to `__divdi3' drivers/built-in.o:tc90522.c:(.text+0x260bb64): more undefined references to `__divdi3' follow Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-24[media] tc90522: declare tc90522_functionality as staticMauro Carvalho Chehab1-1/+1
drivers/media/dvb-frontends/tc90522.c:706:5: warning: symbol 'tc90522_functionality' was not declared. Should it be static? drivers/media/dvb-frontends/tc90522.c:706:5: warning: no previous prototype for 'tc90522_functionality' [-Wmissing-prototypes] u32 tc90522_functionality(struct i2c_adapter *adap) ^ Cc: Akihiro Tsukada <tskd08@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-24[media] tc90522: add driver for Toshiba TC90522 quad demodulatorAkihiro Tsukada4-0/+890
This patch adds driver for tc90522 demodulator chips. The chip contains 4 demod modules that run in parallel and are independently controllable via separate I2C addresses. Two of the modules are for ISDB-T and the rest for ISDB-S. It is used in earthsoft pt3 cards. Note that this driver does not init the chip, because the initilization sequence / register setting is not disclosed. Thus, the driver assumes that the chips are initilized externally by its parent board driver before fe->ops->init() are called. Earthsoft PT3 PCIe card, for example, contains the init sequence in its private memory and provides a command to trigger the sequence. Signed-off-by: Akihiro Tsukada <tskd08@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-23[media] dvb: si21xx: buffer overflow in si21_writeregs()Dan Carpenter1-0/+3
"len" is user controlled and can be up to 255. Anything more than 59 will cause a buffer overflow so we need to add a test for that. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-23[media] si2165: enable Si2161 supportMatthias Schwarzott1-12/+27
Additionally print chip name with revision symbolically. This is a preparation for supporting new Hauppauge WinTV-HVR-900-H based on cx231xx. Signed-off-by: Matthias Schwarzott <zzam@gentoo.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-23[media] si2165: Load driver for all hardware revisionsMatthias Schwarzott2-10/+18
Current firmware is only for revision D. Signed-off-by: Matthias Schwarzott <zzam@gentoo.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-23[media] stv0367: Remove an unused parameterMauro Carvalho Chehab1-2/+0
cab_state->modulation is initialized with a wrong value: drivers/media/dvb-frontends/stv0367.c:3000:42: warning: mixing different enum types drivers/media/dvb-frontends/stv0367.c:3000:42: int enum fe_modulation versus drivers/media/dvb-frontends/stv0367.c:3000:42: int enum stv0367cab_mod as it was declared as "enum stv0367cab_mod". While it could be fixed, there's no value on it, as this is never used. So, just remove the modulation from cab_state structure. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-23[media] media: stv0367: fix frontend modulation initialization with ↵Maks Naumov1-1/+1
FE_CAB_MOD_QAM256 It was using the wrong constant for QAM256 on get_frontend. Signed-off-by: Maks Naumov <maksqwe1@ukr.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-23[media] dvb: return the error from i2c_transfer if negativeHans Wennborg1-0/+2
Just returns whatever error that was returned by the i2c core, in the case of errors, only returning -EREMOTEIO if the transfer size is not what it was expected. Signed-off-by: Hans Wennborg <hans@hanshq.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-23[media] dvb: remove 0x prefix from decimal value in printfHans Wennborg1-1/+1
The returned code is 0, 1 or an error. It doesn't make sense to print it in hexadecimal. Signed-off-by: Hans Wennborg <hans@hanshq.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-22[media] drivers/media/dvb-frontends/stv0900_sw.c: Fix break placementAndrey Utkin1-1/+2
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=81621 Reported-by: David Binderman <dcb314@hotmail.com> Signed-off-by: Andrey Utkin <andrey.krieger.utkin@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-22[media] cx24123: fix kernel oops due to missing parent pointerHans Verkuil1-0/+1
When I try to set the TV standard to e.g. PAL on my Hauppauge WinTV-HVR3000 I get the following oops: 9464.262345] CX24123: detected CX24123 [ 9464.262526] BUG: unable to handle kernel NULL pointer dereference at 0000000000000230 [ 9464.262555] IP: [<ffffffff816676b5>] acpi_i2c_install_space_handler+0x15/0xc0 [ 9464.262576] PGD 0 [ 9464.262584] Oops: 0000 [#1] PREEMPT SMP [ 9464.262597] Modules linked in: cx24123 cx22702 cx88_dvb(+) videobuf_dvb cx88_vp3054_i2c cx88_blackbird cx8802 ir_lirc_codec ir_xmp_decoder ir_sanyo_decoder ir_jvc_decoder ir_mce_kbd_decoder ir_sharp_decoder lirc_dev ir_sony_decoder ir_rc6_decoder ir_nec_decoder ir_rc5_decoder rc_hauppauge wm8775 tuner_simple tuner_types tda9887 cx8800 cx88xx btcx_risc videobuf_dma_sg videobuf_core mt2131 s5h1409 tda8290 tuner cx25840 cx23885 altera_ci tda18271 altera_stapl videobuf2_dvb tveeprom cx2341x videobuf2_dma_sg dvb_core rc_core videobuf2_memops videobuf2_core v4l2_common videodev media nouveau x86_pkg_temp_thermal cfbfillrect cfbimgblt cfbcopyarea ttm drm_kms_helper processor button isci [ 9464.262786] CPU: 2 PID: 2417 Comm: modprobe Not tainted 3.17.0-rc1-telek #322 [ 9464.262796] Hardware name: ASUSTeK COMPUTER INC. Z9PE-D8 WS/Z9PE-D8 WS, BIOS 5404 02/10/2014 [ 9464.262807] task: ffff881097959ad0 ti: ffff88109967c000 task.ti: ffff88109967c000 [ 9464.262817] RIP: 0010:[<ffffffff816676b5>] [<ffffffff816676b5>] acpi_i2c_install_space_handler+0x15/0xc0 [ 9464.262834] RSP: 0018:ffff88109967fbd8 EFLAGS: 00010246 [ 9464.262843] RAX: 0000000000000000 RBX: ffff880892a89540 RCX: 0000000000000000 [ 9464.262853] RDX: 0000000080000001 RSI: ffff880892e75870 RDI: ffff880892a89540 [ 9464.262862] RBP: ffff88109967fbf8 R08: ffff881099b2ccc0 R09: ffff880891efa088 [ 9464.262872] R10: 0000000000000000 R11: 0000000000000022 R12: 0000000000000000 [ 9464.262883] R13: ffff880892a895b0 R14: 00000000ffffffed R15: ffff88089b48f800 [ 9464.262893] FS: 00007fe42b6d7700(0000) GS:ffff88089fc40000(0000) knlGS:0000000000000000 [ 9464.262904] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 9464.262912] CR2: 0000000000000230 CR3: 0000001094078000 CR4: 00000000000407e0 [ 9464.262922] Stack: [ 9464.262927] ffff880892a89540 0000000000000000 ffff880892a895b0 ffff88109a155a80 [ 9464.262944] ffff88109967fc20 ffffffff81666a36 0000000000000020 ffff880892a89540 [ 9464.262960] ffffffffa01c8d40 ffff88109967fc40 ffffffff81666c67 ffff880892a89000 [ 9464.262977] Call Trace: [ 9464.262987] [<ffffffff81666a36>] i2c_register_adapter+0x166/0x340 [ 9464.262998] [<ffffffff81666c67>] i2c_add_adapter+0x57/0x60 [ 9464.263011] [<ffffffffa01e2c58>] cx24123_attach+0x108/0x1ba [cx24123] [ 9464.263025] [<ffffffffa01c5a76>] dvb_register+0x404/0x245b [cx88_dvb] [ 9464.263039] [<ffffffffa0059183>] ? videobuf_queue_core_init+0xe3/0x140 [videobuf_core] [ 9464.263052] [<ffffffffa01c54b1>] cx8802_dvb_probe+0x1e1/0x261 [cx88_dvb] [ 9464.263066] [<ffffffffa01a3b00>] cx8802_register_driver+0x190/0x20d [cx8802] [ 9464.263077] [<ffffffffa01cc000>] ? 0xffffffffa01cc000 [ 9464.263089] [<ffffffffa01cc025>] dvb_init+0x25/0x27 [cx88_dvb] [ 9464.263101] [<ffffffff810002c4>] do_one_initcall+0x84/0x1c0 [ 9464.263113] [<ffffffff811893fa>] ? __vunmap+0x9a/0x100 [ 9464.263125] [<ffffffff81122a66>] load_module+0x1216/0x1790 [ 9464.263134] [<ffffffff8111ff70>] ? __symbol_put+0x70/0x70 [ 9464.263145] [<ffffffff811aa8cc>] ? vfs_read+0x11c/0x170 [ 9464.263156] [<ffffffff811201d9>] ? copy_module_from_fd.isra.53+0x119/0x170 [ 9464.263168] [<ffffffff81123116>] SyS_finit_module+0x76/0x80 [ 9464.263181] [<ffffffff818d19e9>] system_call_fastpath+0x16/0x1b [ 9464.263190] Code: 81 31 c0 e8 2e f6 e8 ff 48 83 c4 08 5b 5d eb de 66 0f 1f 44 00 00 55 48 89 e5 41 56 41 55 41 54 53 41 be ed ff ff ff 48 8b 47 70 <48> 8b 80 30 02 00 00 48 85 c0 74 58 4c 8b 68 08 4d 85 ed 74 4f [ 9464.263347] RIP [<ffffffff816676b5>] acpi_i2c_install_space_handler+0x15/0xc0 [ 9464.263361] RSP <ffff88109967fbd8> [ 9464.263367] CR2: 0000000000000230 [ 9464.266919] ---[ end trace 57fd490bdb72e733 ]--- I traced this to a NULL i2c_adapter parent pointer when cx24123 creates its own i2c adapter. The acpi_i2c_install_space_handler function appeared in 3.17, so that's probably why this hasn't been seen before. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-22[media] af9033: init DVBv5 statisticsAntti Palosaari1-0/+14
We need to init supported stats here in order signal app which stats are supported. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-22[media] af9033: remove all DVBv3 stat calculation logicAntti Palosaari1-49/+0
Statistics are now calculated for DVBv5 and those DVBv5 values are returned for legacy DVBv3 calls also. So we could remove all old statistics calculation logic. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-22[media] af9033: wrap DVBv3 BER to DVBv5 BERAntti Palosaari1-6/+3
DVBv5 BER is calculated anyway, so just return it for legacy read_ber() API too. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-22[media] af9033: wrap DVBv3 UCB to DVBv5 UCB statsAntti Palosaari1-7/+1
Remove 'duplicate' DVBv3 read UCB implementation and return value, calculated already for DVBv5 statistics. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-22[media] af9033: implement DVBv5 post-Viterbi BERAntti Palosaari1-0/+15
Implement following DTV API commands: DTV_STAT_POST_ERROR_BIT_COUNT DTV_STAT_POST_TOTAL_BIT_COUNT These will provide post-Viterbi bit error rate reporting. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-22[media] af9033: implement DVBv5 stat block countersAntti Palosaari1-1/+32
Implement following API commands: DTV_STAT_ERROR_BLOCK_COUNT DTV_STAT_TOTAL_BLOCK_COUNT These returns total and uncorrected error packets from outer FEC. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-22[media] af9033: wrap DVBv3 read SNR to DVBv5 CNRAntti Palosaari2-46/+7
Remove 'duplicate' DVBv3 read SNR implementation and return value, calculated already by DVBv5 CNR, from the cache. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-22[media] af9033: implement DVBv5 statistics for CNRAntti Palosaari1-2/+52
Return CNR via DVBv5 statistics API. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-22[media] af9033: implement DVBv5 statistics for signal strengthAntti Palosaari1-0/+48
Let the demod firmware estimate RF signal strength and return it to the app as a dBm. To handle that, use thread which reads signal strengths from firmware in 2 sec intervals when device is active. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-22[media] af9033: remove I2C addr from configAntti Palosaari1-5/+4
I2C driver address is passed as a i2c_new_device() parameter when device is created. Thus no need to keep it in config struct. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-22[media] af9033: clean up loggingAntti Palosaari1-52/+46
It uses I2C client so logging system prints module name automatically. Function name is also added automatically, if it is requested from dynamic debug by setting proper format. Because of that, we could simplify logging in our driver. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-22[media] af9033: convert to I2C clientAntti Palosaari2-139/+141
Convert driver to kernel I2C model. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-22[media] af9033: rename 'state' to 'dev'Antti Palosaari1-164/+164
foo_dev seems to be most correct term for the structure holding data of each device instance. It is most used term in Kernel codebase and also examples from book Linux Device Drivers, Third Edition, uses it. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-22[media] af9033: fix firmware version loggingAntti Palosaari1-1/+16
AF9030 and IT9130 series has different memory location for firmware version. Choose correct location according to chip type. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-22[media] af9033: make checkpatch.pl happyAntti Palosaari1-12/+18
Correct issues reported by checkpatch.pl. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-22[media] af9033: provide dyn0_clk clock sourceAntti Palosaari2-8/+7
AF903x/IT913x demod provides clock source(s). It seems that this clock source is used for integrated RF tuner of IT913x. It is enabled by default, but firmware disables it automatically when suspend is requested (suspend_flag (0x004c) + trigger_ofsm (0x0000)). Automatic disable behavior seems to be similar for both AF903x and IT913x I tested, though there is no likely any real clock user in a case of AF903x. Cc: Bimow Chen <Bimow.Chen@ite.com.tw> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-21[media] si2168: avoid firmware loading if it has been loaded previouslyOlli Salonen2-3/+29
Add a variable to keep track if firmware is loaded or not and skip parts of the initialization if fw is already loaded. Resume from sleep with a different command compared to initial power up and run command 85 after resume command. This behaviour is observed when using manufacturer provided binary-only si2168 driver for TechnoTrend CT2-4400. Signed-off-by: Olli Salonen <olli.salonen@iki.fi> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-08 07:05:01 +0300