summaryrefslogtreecommitdiff
path: root/drivers/md
AgeCommit message (Collapse)AuthorFilesLines
2021-01-30dm integrity: conditionally disable "recalculate" featureMikulas Patocka1-1/+23
commit 5c02406428d5219c367c5f53457698c58bc5f917 upstream. Otherwise a malicious user could (ab)use the "recalculate" feature that makes dm-integrity calculate the checksums in the background while the device is already usable. When the system restarts before all checksums have been calculated, the calculation continues where it was interrupted even if the recalculate feature is not requested the next time the dm device is set up. Disable recalculating if we use internal_hash or journal_hash with a key (e.g. HMAC) and we don't have the "legacy_recalculate" flag. This may break activation of a volume, created by an older kernel, that is not yet fully recalculated -- if this happens, the user should add the "legacy_recalculate" flag to constructor parameters. Cc: stable@vger.kernel.org Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Reported-by: Daniel Glockner <dg@emlix.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-27dm integrity: select CRYPTO_SKCIPHERAnthony Iliopoulos1-0/+1
[ Upstream commit f7b347acb5f6c29d9229bb64893d8b6a2c7949fb ] The integrity target relies on skcipher for encryption/decryption, but certain kernel configurations may not enable CRYPTO_SKCIPHER, leading to compilation errors due to unresolved symbols. Explicitly select CRYPTO_SKCIPHER for DM_INTEGRITY, since it is unconditionally dependent on it. Signed-off-by: Anthony Iliopoulos <ailiop@suse.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-01-27dm integrity: fix a crash if "recalculate" used without "internal_hash"Mikulas Patocka1-0/+6
commit 2d06dfecb132a1cc2e374a44eae83b5c4356b8b4 upstream. Recalculate can only be specified with internal_hash. Cc: stable@vger.kernel.org # v4.19+ Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-27dm: avoid filesystem lookup in dm_get_dev_t()Hannes Reinecke1-3/+12
commit 809b1e4945774c9ec5619a8f4e2189b7b3833c0c upstream. This reverts commit 644bda6f3460 ("dm table: fall back to getting device using name_to_dev_t()") dm_get_dev_t() is just used to convert an arbitrary 'path' string into a dev_t. It doesn't presume that the device is present; that check will be done later, as the only caller is dm_get_device(), which does a dm_get_table_device() later on, which will properly open the device. So if the path string already _is_ in major:minor representation we can convert it directly, avoiding a recursion into the filesystem to lookup the block device. This avoids a hang in multipath_message() when the filesystem is inaccessible. Fixes: 644bda6f3460 ("dm table: fall back to getting device using name_to_dev_t()") Cc: stable@vger.kernel.org Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin Wilck <mwilck@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-19dm: eliminate potential source of excessive kernel log noiseMike Snitzer1-1/+1
commit 0378c625afe80eb3f212adae42cc33c9f6f31abf upstream. There wasn't ever a real need to log an error in the kernel log for ioctls issued with insufficient permissions. Simply return an error and if an admin/user is sufficiently motivated they can enable DM's dynamic debugging to see an explanation for why the ioctls were disallowed. Reported-by: Nir Soffer <nsoffer@redhat.com> Fixes: e980f62353c6 ("dm: don't allow ioctls to targets that don't map to whole devices") Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-19dm integrity: fix flush with external metadata deviceMikulas Patocka2-8/+54
[ Upstream commit 9b5948267adc9e689da609eb61cf7ed49cae5fa8 ] With external metadata device, flush requests are not passed down to the data device. Fix this by submitting the flush request in dm_integrity_flush_buffers. In order to not degrade performance, we overlap the data device flush with the metadata device flush. Reported-by: Lukas Straub <lukasstraub2@web.de> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-01-19dm integrity: fix the maximum number of argumentsMikulas Patocka1-1/+1
commit 17ffc193cdc6dc7a613d00d8ad47fc1f801b9bf0 upstream. Advance the maximum number of arguments from 9 to 15 to account for all potential feature flags that may be supplied. Linux 4.19 added "meta_device" (356d9d52e1221ba0c9f10b8b38652f78a5298329) and "recalculate" (a3fcf7253139609bf9ff901fbf955fba047e75dd) flags. Commit 468dfca38b1a6fbdccd195d875599cb7c8875cd9 added "sectors_per_bit" and "bitmap_flush_interval". Commit 84597a44a9d86ac949900441cea7da0af0f2f473 added "allow_discards". And the commit d537858ac8aaf4311b51240893add2fc62003b97 added "fix_padding". Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org # v4.19+ Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-19dm snapshot: flush merged data before committing metadataAkilesh Kailash1-0/+24
commit fcc42338375a1e67b8568dbb558f8b784d0f3b01 upstream. If the origin device has a volatile write-back cache and the following events occur: 1: After finishing merge operation of one set of exceptions, merge_callback() is invoked. 2: Update the metadata in COW device tracking the merge completion. This update to COW device is flushed cleanly. 3: System crashes and the origin device's cache where the recent merge was completed has not been flushed. During the next cycle when we read the metadata from the COW device, we will skip reading those metadata whose merge was completed in step (1). This will lead to data loss/corruption. To address this, flush the origin device post merge IO before updating the metadata. Cc: stable@vger.kernel.org Signed-off-by: Akilesh Kailash <akailash@google.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-19dm raid: fix discard limits for raid1Mike Snitzer1-3/+3
commit cc07d72bf350b77faeffee1c37bc52197171473f upstream. Block core warned that discard_granularity was 0 for dm-raid with personality of raid1. Reason is that raid_io_hints() was incorrectly special-casing raid1 rather than raid0. Fix raid_io_hints() by removing discard limits settings for raid1. Check for raid0 instead. Fixes: 61697a6abd24a ("dm: eliminate 'split_discard_bios' flag from DM target interface") Cc: stable@vger.kernel.org Reported-by: Zdenek Kabelac <zkabelac@redhat.com> Reported-by: Mikulas Patocka <mpatocka@redhat.com> Reported-by: Stephan Bärwolf <stephan@matrixstorm.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-06dm verity: skip verity work if I/O error when system is shutting downHyeongseok Kim1-1/+11
[ Upstream commit 252bd1256396cebc6fc3526127fdb0b317601318 ] If emergency system shutdown is called, like by thermal shutdown, a dm device could be alive when the block device couldn't process I/O requests anymore. In this state, the handling of I/O errors by new dm I/O requests or by those already in-flight can lead to a verity corruption state, which is a misjudgment. So, skip verity work in response to I/O error when system is shutting down. Signed-off-by: Hyeongseok Kim <hyeongseok@gmail.com> Reviewed-by: Sami Tolvanen <samitolvanen@google.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-01-06md/raid10: initialize r10_bio->read_slot before use.Kevin Vigor1-1/+2
commit 93decc563637c4288380912eac0eb42fb246cc04 upstream. In __make_request() a new r10bio is allocated and passed to raid10_read_request(). The read_slot member of the bio is not initialized, and the raid10_read_request() uses it to index an array. This leads to occasional panics. Fix by initializing the field to invalid value and checking for valid value in raid10_read_request(). Cc: stable@vger.kernel.org Signed-off-by: Kevin Vigor <kvigor@gmail.com> Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-30md/cluster: fix deadlock when node is doing resync jobZhao Heming2-31/+42
commit bca5b0658020be90b6b504ca514fd80110204f71 upstream. md-cluster uses MD_CLUSTER_SEND_LOCK to make node can exclusively send msg. During sending msg, node can concurrently receive msg from another node. When node does resync job, grab token_lockres:EX may trigger a deadlock: ``` nodeA nodeB -------------------- -------------------- a. send METADATA_UPDATED held token_lockres:EX b. md_do_sync resync_info_update send RESYNCING + set MD_CLUSTER_SEND_LOCK + wait for holding token_lockres:EX c. mdadm /dev/md0 --remove /dev/sdg + held reconfig_mutex + send REMOVE + wait_event(MD_CLUSTER_SEND_LOCK) d. recv_daemon //METADATA_UPDATED from A process_metadata_update + (mddev_trylock(mddev) || MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD) //this time, both return false forever ``` Explaination: a. A send METADATA_UPDATED This will block another node to send msg b. B does sync jobs, which will send RESYNCING at intervals. This will be block for holding token_lockres:EX lock. c. B do "mdadm --remove", which will send REMOVE. This will be blocked by step <b>: MD_CLUSTER_SEND_LOCK is 1. d. B recv METADATA_UPDATED msg, which send from A in step <a>. This will be blocked by step <c>: holding mddev lock, it makes wait_event can't hold mddev lock. (btw, MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD keep ZERO in this scenario.) There is a similar deadlock in commit 0ba959774e93 ("md-cluster: use sync way to handle METADATA_UPDATED msg") In that commit, step c is "update sb". This patch step c is "mdadm --remove". For fixing this issue, we can refer the solution of function: metadata_update_start. Which does the same grab lock_token action. lock_comm can use the same steps to avoid deadlock. By moving MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD from lock_token to lock_comm. It enlarge a little bit window of MD_CLUSTER_HOLDING_MUTEX_FOR_RECVD, but it is safe & can break deadlock. Repro steps (I only triggered 3 times with hundreds tests): two nodes share 3 iSCSI luns: sdg/sdh/sdi. Each lun size is 1GB. ``` ssh root@node2 "mdadm -S --scan" mdadm -S --scan for i in {g,h,i};do dd if=/dev/zero of=/dev/sd$i oflag=direct bs=1M \ count=20; done mdadm -C /dev/md0 -b clustered -e 1.2 -n 2 -l mirror /dev/sdg /dev/sdh \ --bitmap-chunk=1M ssh root@node2 "mdadm -A /dev/md0 /dev/sdg /dev/sdh" sleep 5 mkfs.xfs /dev/md0 mdadm --manage --add /dev/md0 /dev/sdi mdadm --wait /dev/md0 mdadm --grow --raid-devices=3 /dev/md0 mdadm /dev/md0 --fail /dev/sdg mdadm /dev/md0 --remove /dev/sdg mdadm --grow --raid-devices=2 /dev/md0 ``` test script will hung when executing "mdadm --remove". ``` # dump stacks by "echo t > /proc/sysrq-trigger" md0_cluster_rec D 0 5329 2 0x80004000 Call Trace: __schedule+0x1f6/0x560 ? _cond_resched+0x2d/0x40 ? schedule+0x4a/0xb0 ? process_metadata_update.isra.0+0xdb/0x140 [md_cluster] ? wait_woken+0x80/0x80 ? process_recvd_msg+0x113/0x1d0 [md_cluster] ? recv_daemon+0x9e/0x120 [md_cluster] ? md_thread+0x94/0x160 [md_mod] ? wait_woken+0x80/0x80 ? md_congested+0x30/0x30 [md_mod] ? kthread+0x115/0x140 ? __kthread_bind_mask+0x60/0x60 ? ret_from_fork+0x1f/0x40 mdadm D 0 5423 1 0x00004004 Call Trace: __schedule+0x1f6/0x560 ? __schedule+0x1fe/0x560 ? schedule+0x4a/0xb0 ? lock_comm.isra.0+0x7b/0xb0 [md_cluster] ? wait_woken+0x80/0x80 ? remove_disk+0x4f/0x90 [md_cluster] ? hot_remove_disk+0xb1/0x1b0 [md_mod] ? md_ioctl+0x50c/0xba0 [md_mod] ? wait_woken+0x80/0x80 ? blkdev_ioctl+0xa2/0x2a0 ? block_ioctl+0x39/0x40 ? ksys_ioctl+0x82/0xc0 ? __x64_sys_ioctl+0x16/0x20 ? do_syscall_64+0x5f/0x150 ? entry_SYSCALL_64_after_hwframe+0x44/0xa9 md0_resync D 0 5425 2 0x80004000 Call Trace: __schedule+0x1f6/0x560 ? schedule+0x4a/0xb0 ? dlm_lock_sync+0xa1/0xd0 [md_cluster] ? wait_woken+0x80/0x80 ? lock_token+0x2d/0x90 [md_cluster] ? resync_info_update+0x95/0x100 [md_cluster] ? raid1_sync_request+0x7d3/0xa40 [raid1] ? md_do_sync.cold+0x737/0xc8f [md_mod] ? md_thread+0x94/0x160 [md_mod] ? md_congested+0x30/0x30 [md_mod] ? kthread+0x115/0x140 ? __kthread_bind_mask+0x60/0x60 ? ret_from_fork+0x1f/0x40 ``` At last, thanks for Xiao's solution. Cc: stable@vger.kernel.org Signed-off-by: Zhao Heming <heming.zhao@suse.com> Suggested-by: Xiao Ni <xni@redhat.com> Reviewed-by: Xiao Ni <xni@redhat.com> Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-30md/cluster: block reshape with remote resync jobZhao Heming1-2/+6
commit a8da01f79c89755fad55ed0ea96e8d2103242a72 upstream. Reshape request should be blocked with ongoing resync job. In cluster env, a node can start resync job even if the resync cmd isn't executed on it, e.g., user executes "mdadm --grow" on node A, sometimes node B will start resync job. However, current update_raid_disks() only check local recovery status, which is incomplete. As a result, we see user will execute "mdadm --grow" successfully on local, while the remote node deny to do reshape job when it doing resync job. The inconsistent handling cause array enter unexpected status. If user doesn't observe this issue and continue executing mdadm cmd, the array doesn't work at last. Fix this issue by blocking reshape request. When node executes "--grow" and detects ongoing resync, it should stop and report error to user. The following script reproduces the issue with ~100% probability. (two nodes share 3 iSCSI luns: sdg/sdh/sdi. Each lun size is 1GB) ``` # on node1, node2 is the remote node. ssh root@node2 "mdadm -S --scan" mdadm -S --scan for i in {g,h,i};do dd if=/dev/zero of=/dev/sd$i oflag=direct bs=1M \ count=20; done mdadm -C /dev/md0 -b clustered -e 1.2 -n 2 -l mirror /dev/sdg /dev/sdh ssh root@node2 "mdadm -A /dev/md0 /dev/sdg /dev/sdh" sleep 5 mdadm --manage --add /dev/md0 /dev/sdi mdadm --wait /dev/md0 mdadm --grow --raid-devices=3 /dev/md0 mdadm /dev/md0 --fail /dev/sdg mdadm /dev/md0 --remove /dev/sdg mdadm --grow --raid-devices=2 /dev/md0 ``` Cc: stable@vger.kernel.org Signed-off-by: Zhao Heming <heming.zhao@suse.com> Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-30dm ioctl: fix error return code in target_messageQinglang Miao1-0/+1
[ Upstream commit 4d7659bfbe277a43399a4a2d90fca141e70f29e1 ] Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: 2ca4c92f58f9 ("dm ioctl: prevent empty message") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-30md: fix a warning caused by a race between concurrent md_ioctl()sDae R. Jeong1-2/+5
commit c731b84b51bf7fe83448bea8f56a6d55006b0615 upstream. Syzkaller reports a warning as belows. WARNING: CPU: 0 PID: 9647 at drivers/md/md.c:7169 ... Call Trace: ... RIP: 0010:md_ioctl+0x4017/0x5980 drivers/md/md.c:7169 RSP: 0018:ffff888096027950 EFLAGS: 00010293 RAX: ffff88809322c380 RBX: 0000000000000932 RCX: ffffffff84e266f2 RDX: 0000000000000000 RSI: ffffffff84e299f7 RDI: 0000000000000007 RBP: ffff888096027bc0 R08: ffff88809322c380 R09: ffffed101341a482 R10: ffff888096027940 R11: ffff88809a0d240f R12: 0000000000000932 R13: ffff8880a2c14100 R14: ffff88809a0d2268 R15: ffff88809a0d2408 __blkdev_driver_ioctl block/ioctl.c:304 [inline] blkdev_ioctl+0xece/0x1c10 block/ioctl.c:606 block_ioctl+0xee/0x130 fs/block_dev.c:1930 vfs_ioctl fs/ioctl.c:46 [inline] file_ioctl fs/ioctl.c:509 [inline] do_vfs_ioctl+0xd5f/0x1380 fs/ioctl.c:696 ksys_ioctl+0xab/0xd0 fs/ioctl.c:713 __do_sys_ioctl fs/ioctl.c:720 [inline] __se_sys_ioctl fs/ioctl.c:718 [inline] __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:718 do_syscall_64+0xfd/0x680 arch/x86/entry/common.c:301 entry_SYSCALL_64_after_hwframe+0x49/0xbe This is caused by a race between two concurrenct md_ioctl()s closing the array. CPU1 (md_ioctl()) CPU2 (md_ioctl()) ------ ------ set_bit(MD_CLOSING, &mddev->flags); did_set_md_closing = true; WARN_ON_ONCE(test_bit(MD_CLOSING, &mddev->flags)); if(did_set_md_closing) clear_bit(MD_CLOSING, &mddev->flags); Fix the warning by returning immediately if the MD_CLOSING bit is set in &mddev->flags which indicates that the array is being closed. Fixes: 065e519e71b2 ("md: MD_CLOSING needs to be cleared after called md_set_readonly or do_md_stop") Reported-by: syzbot+1e46a0864c1a6e9bd3d8@syzkaller.appspotmail.com Cc: stable@vger.kernel.org Signed-off-by: Dae R. Jeong <dae.r.jeong@kaist.ac.kr> Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-30dm table: Remove BUG_ON(in_interrupt())Thomas Gleixner1-6/+0
[ Upstream commit e7b624183d921b49ef0a96329f21647d38865ee9 ] The BUG_ON(in_interrupt()) in dm_table_event() is a historic leftover from a rework of the dm table code which changed the calling context. Issuing a BUG for a wrong calling context is frowned upon and in_interrupt() is deprecated and only covering parts of the wrong contexts. The sanity check for the context is covered by CONFIG_DEBUG_ATOMIC_SLEEP and other debug facilities already. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-11dm writecache: remove BUG() and fail gracefully insteadMike Snitzer1-1/+1
commit 857c4c0a8b2888d806f4308c58f59a6a81a1dee9 upstream. Building on arch/s390/ results in this build error: cc1: some warnings being treated as errors ../drivers/md/dm-writecache.c: In function 'persistent_memory_claim': ../drivers/md/dm-writecache.c:323:1: error: no return statement in function returning non-void [-Werror=return-type] Fix this by replacing the BUG() with an -EOPNOTSUPP return. Fixes: 48debafe4f2f ("dm: add writecache target") Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-11dm: remove invalid sparse __acquires and __releases annotationsMike Snitzer1-2/+0
commit bde3808bc8c2741ad3d804f84720409aee0c2972 upstream. Fixes sparse warnings: drivers/md/dm.c:508:12: warning: context imbalance in 'dm_prepare_ioctl' - wrong count at exit drivers/md/dm.c:543:13: warning: context imbalance in 'dm_unprepare_ioctl' - wrong count at exit Fixes: 971888c46993f ("dm: hold DM table for duration of ioctl rather than use blkdev_get") Cc: stable@vger.kernel.org Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-11dm: fix bug with RCU locking in dm_blk_report_zonesSergei Shtepa1-2/+4
commit 89478335718c98557f10470a9bc5c555b9261c4e upstream. The dm_get_live_table() function makes RCU read lock so dm_put_live_table() must be called even if dm_table map is not found. Fixes: e76239a3748c9 ("block: add a report_zones method") Cc: stable@vger.kernel.org Signed-off-by: Sergei Shtepa <sergei.shtepa@veeam.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-11dm writecache: fix the maximum number of argumentsMikulas Patocka1-1/+1
commit 67aa3ec3dbc43d6e34401d9b2a40040ff7bb57af upstream. Advance the maximum number of arguments to 16. This fixes issue where certain operations, combined with table configured args, exceed 10 arguments. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Fixes: 48debafe4f2f ("dm: add writecache target") Cc: stable@vger.kernel.org # v4.18+ Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-05md/raid5: fix oops during stripe resizingSong Liu1-2/+2
commit b44c018cdf748b96b676ba09fdbc5b34fc443ada upstream. KoWei reported crash during raid5 reshape: [ 1032.252932] Oops: 0002 [#1] SMP PTI [...] [ 1032.252943] RIP: 0010:memcpy_erms+0x6/0x10 [...] [ 1032.252947] RSP: 0018:ffffba1ac0c03b78 EFLAGS: 00010286 [ 1032.252949] RAX: 0000784ac0000000 RBX: ffff91bec3d09740 RCX: 0000000000001000 [ 1032.252951] RDX: 0000000000001000 RSI: ffff91be6781c000 RDI: 0000784ac0000000 [ 1032.252953] RBP: ffffba1ac0c03bd8 R08: 0000000000001000 R09: ffffba1ac0c03bf8 [ 1032.252954] R10: 0000000000000000 R11: 0000000000000000 R12: ffffba1ac0c03bf8 [ 1032.252955] R13: 0000000000001000 R14: 0000000000000000 R15: 0000000000000000 [ 1032.252958] FS: 0000000000000000(0000) GS:ffff91becf500000(0000) knlGS:0000000000000000 [ 1032.252959] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1032.252961] CR2: 0000784ac0000000 CR3: 000000031780a002 CR4: 00000000001606e0 [ 1032.252962] Call Trace: [ 1032.252969] ? async_memcpy+0x179/0x1000 [async_memcpy] [ 1032.252977] ? raid5_release_stripe+0x8e/0x110 [raid456] [ 1032.252982] handle_stripe_expansion+0x15a/0x1f0 [raid456] [ 1032.252988] handle_stripe+0x592/0x1270 [raid456] [ 1032.252993] handle_active_stripes.isra.0+0x3cb/0x5a0 [raid456] [ 1032.252999] raid5d+0x35c/0x550 [raid456] [ 1032.253002] ? schedule+0x42/0xb0 [ 1032.253006] ? schedule_timeout+0x10e/0x160 [ 1032.253011] md_thread+0x97/0x160 [ 1032.253015] ? wait_woken+0x80/0x80 [ 1032.253019] kthread+0x104/0x140 [ 1032.253022] ? md_start_sync+0x60/0x60 [ 1032.253024] ? kthread_park+0x90/0x90 [ 1032.253027] ret_from_fork+0x35/0x40 This is because cache_size_mutex was unlocked too early in resize_stripes, which races with grow_one_stripe() that grow_one_stripe() allocates a stripe with wrong pool_size. Fix this issue by unlocking cache_size_mutex after updating pool_size. Cc: <stable@vger.kernel.org> # v4.4+ Reported-by: KoWei Sung <winders@amazon.com> Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-05md/bitmap: md_bitmap_get_counter returns wrong blocksZhao Heming1-1/+1
[ Upstream commit d837f7277f56e70d82b3a4a037d744854e62f387 ] md_bitmap_get_counter() has code: ``` if (bitmap->bp[page].hijacked || bitmap->bp[page].map == NULL) csize = ((sector_t)1) << (bitmap->chunkshift + PAGE_COUNTER_SHIFT - 1); ``` The minus 1 is wrong, this branch should report 2048 bits of space. With "-1" action, this only report 1024 bit of space. This bug code returns wrong blocks, but it doesn't inflence bitmap logic: 1. Most callers focus this function return value (the counter of offset), not the parameter blocks. 2. The bug is only triggered when hijacked is true or map is NULL. the hijacked true condition is very rare. the "map == null" only true when array is creating or resizing. 3. Even the caller gets wrong blocks, current code makes caller just to call md_bitmap_get_counter() one more time. Signed-off-by: Zhao Heming <heming.zhao@suse.com> Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-29md/bitmap: fix memory leak of temporary bitmapZhao Heming2-1/+3
[ Upstream commit 1383b347a8ae4a69c04ae3746e6cb5c8d38e2585 ] Callers of get_bitmap_from_slot() are responsible to free the bitmap. Suggested-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Signed-off-by: Zhao Heming <heming.zhao@suse.com> Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-01dm: fix bio splitting and its bio completion order for regular IOMike Snitzer1-21/+2
commit ee1dfad5325ff1cfb2239e564cd411b3bfe8667a upstream. dm_queue_split() is removed because __split_and_process_bio() _must_ handle splitting bios to ensure proper bio submission and completion ordering as a bio is split. Otherwise, multiple recursive calls to ->submit_bio will cause multiple split bios to be allocated from the same ->bio_split mempool at the same time. This would result in deadlock in low memory conditions because no progress could be made (only one bio is available in ->bio_split mempool). This fix has been verified to still fix the loss of performance, due to excess splitting, that commit 120c9257f5f1 provided. Fixes: 120c9257f5f1 ("Revert "dm: always call blk_queue_split() in dm_process_bio()"") Cc: stable@vger.kernel.org # 5.0+, requires custom backport due to 5.9 changes Reported-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-01bcache: fix a lost wake-up problem caused by mca_cannibalize_lockGuoju Fang3-4/+10
[ Upstream commit 34cf78bf34d48dddddfeeadb44f9841d7864997a ] This patch fix a lost wake-up problem caused by the race between mca_cannibalize_lock and bch_cannibalize_unlock. Consider two processes, A and B. Process A is executing mca_cannibalize_lock, while process B takes c->btree_cache_alloc_lock and is executing bch_cannibalize_unlock. The problem happens that after process A executes cmpxchg and will execute prepare_to_wait. In this timeslice process B executes wake_up, but after that process A executes prepare_to_wait and set the state to TASK_INTERRUPTIBLE. Then process A goes to sleep but no one will wake up it. This problem may cause bcache device to dead. Signed-off-by: Guoju Fang <fangguoju@gmail.com> Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-01dm table: do not allow request-based DM to stack on partitionsMike Snitzer1-19/+8
[ Upstream commit 6ba01df72b4b63a26b4977790f58d8f775d2992c ] Partitioned request-based devices cannot be used as underlying devices for request-based DM because no partition offsets are added to each incoming request. As such, until now, stacking on partitioned devices would _always_ result in data corruption (e.g. wiping the partition table, writing to other partitions, etc). Fix this by disallowing request-based stacking on partitions. While at it, since all .request_fn support has been removed from block core, remove legacy dm-table code that differentiated between blk-mq and .request_fn request-based. Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-09-23dm: Call proper helper to determine dax supportJan Kara1-3/+7
commit e2ec5128254518cae320d5dc631b71b94160f663 upstream. DM was calling generic_fsdax_supported() to determine whether a device referenced in the DM table supports DAX. However this is a helper for "leaf" device drivers so that they don't have to duplicate common generic checks. High level code should call dax_supported() helper which that calls into appropriate helper for the particular device. This problem manifested itself as kernel messages: dm-3: error: dax access failed (-95) when lvm2-testsuite run in cases where a DM device was stacked on top of another DM device. Fixes: 7bf7eac8d648 ("dax: Arrange for dax_supported check to span multiple devices") Cc: <stable@vger.kernel.org> Tested-by: Adrian Huang <ahuang12@lenovo.com> Signed-off-by: Jan Kara <jack@suse.cz> Acked-by: Mike Snitzer <snitzer@redhat.com> Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/r/160061715195.13131.5503173247632041975.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-23dm/dax: Fix table reference countsDan Williams1-2/+3
commit 02186d8897d49b0afd3c80b6cf23437d91024065 upstream. A recent fix to the dm_dax_supported() flow uncovered a latent bug. When dm_get_live_table() fails it is still required to drop the srcu_read_lock(). Without this change the lvm2 test-suite triggers this warning: # lvm2-testsuite --only pvmove-abort-all.sh WARNING: lock held when returning to user space! 5.9.0-rc5+ #251 Tainted: G OE ------------------------------------------------ lvm/1318 is leaving the kernel with locks still held! 1 lock held by lvm/1318: #0: ffff9372abb5a340 (&md->io_barrier){....}-{0:0}, at: dm_get_live_table+0x5/0xb0 [dm_mod] ...and later on this hang signature: INFO: task lvm:1344 blocked for more than 122 seconds. Tainted: G OE 5.9.0-rc5+ #251 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:lvm state:D stack: 0 pid: 1344 ppid: 1 flags:0x00004000 Call Trace: __schedule+0x45f/0xa80 ? finish_task_switch+0x249/0x2c0 ? wait_for_completion+0x86/0x110 schedule+0x5f/0xd0 schedule_timeout+0x212/0x2a0 ? __schedule+0x467/0xa80 ? wait_for_completion+0x86/0x110 wait_for_completion+0xb0/0x110 __synchronize_srcu+0xd1/0x160 ? __bpf_trace_rcu_utilization+0x10/0x10 __dm_suspend+0x6d/0x210 [dm_mod] dm_suspend+0xf6/0x140 [dm_mod] Fixes: 7bf7eac8d648 ("dax: Arrange for dax_supported check to span multiple devices") Cc: <stable@vger.kernel.org> Cc: Jan Kara <jack@suse.cz> Cc: Alasdair Kergon <agk@redhat.com> Cc: Mike Snitzer <snitzer@redhat.com> Reported-by: Adrian Huang <ahuang12@lenovo.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Tested-by: Adrian Huang <ahuang12@lenovo.com> Link: https://lore.kernel.org/r/160045867590.25663.7548541079217827340.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-09dm thin metadata: Fix use-after-free in dm_bm_set_read_onlyYe Bin2-7/+9
commit 3a653b205f29b3f9827a01a0c88bfbcb0d169494 upstream. The following error ocurred when testing disk online/offline: [ 301.798344] device-mapper: thin: 253:5: aborting current metadata transaction [ 301.848441] device-mapper: thin: 253:5: failed to abort metadata transaction [ 301.849206] Aborting journal on device dm-26-8. [ 301.850489] EXT4-fs error (device dm-26) in __ext4_new_inode:943: Journal has aborted [ 301.851095] EXT4-fs (dm-26): Delayed block allocation failed for inode 398742 at logical offset 181 with max blocks 19 with error 30 [ 301.854476] BUG: KASAN: use-after-free in dm_bm_set_read_only+0x3a/0x40 [dm_persistent_data] Reason is: metadata_operation_failed abort_transaction dm_pool_abort_metadata __create_persistent_data_objects r = __open_or_format_metadata if (r) --> If failed will free pmd->bm but pmd->bm not set NULL dm_block_manager_destroy(pmd->bm); set_pool_mode dm_pool_metadata_read_only(pool->pmd); dm_bm_set_read_only(pmd->bm); --> use-after-free Add checks to see if pmd->bm is NULL in dm_bm_set_read_only and dm_bm_set_read_write functions. If bm is NULL it means creating the bm failed and so dm_bm_is_read_only must return true. Signed-off-by: Ye Bin <yebin10@huawei.com> Cc: stable@vger.kernel.org Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-09dm thin metadata: Avoid returning cmd->bm wild pointer on errorYe Bin1-2/+6
commit 219403d7e56f9b716ad80ab87db85d29547ee73e upstream. Maybe __create_persistent_data_objects() caller will use PTR_ERR as a pointer, it will lead to some strange things. Signed-off-by: Ye Bin <yebin10@huawei.com> Cc: stable@vger.kernel.org Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-09dm cache metadata: Avoid returning cmd->bm wild pointer on errorYe Bin1-2/+6
commit d16ff19e69ab57e08bf908faaacbceaf660249de upstream. Maybe __create_persistent_data_objects() caller will use PTR_ERR as a pointer, it will lead to some strange things. Signed-off-by: Ye Bin <yebin10@huawei.com> Cc: stable@vger.kernel.org Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-09dm crypt: Initialize crypto wait structuresDamien Le Moal1-1/+1
commit 7785a9e4c228db6d01086a52d5685cd7336a08b7 upstream. Use the DECLARE_CRYPTO_WAIT() macro to properly initialize the crypto wait structures declared on stack before their use with crypto_wait_req(). Fixes: 39d13a1ac41d ("dm crypt: reuse eboiv skcipher for IV generation") Fixes: bbb1658461ac ("dm crypt: Implement Elephant diffuser for Bitlocker compatibility") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-09dm integrity: fix error reporting in bitmap mode after creationMikulas Patocka1-0/+12
commit e27fec66f0a94e35a35548bd0b29ae616e62ec62 upstream. The dm-integrity target did not report errors in bitmap mode just after creation. The reason is that the function integrity_recalc didn't clean up ic->recalc_bitmap as it proceeded with recalculation. Fix this by updating the bitmap accordingly -- the double shift serves to rounddown. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Fixes: 468dfca38b1a ("dm integrity: add a bitmap mode") Cc: stable@vger.kernel.org # v5.2+ Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-09dm mpath: fix racey management of PG initializationMike Snitzer1-7/+15
commit c322ee9320eaa4013ca3620b1130992916b19b31 upstream. Commit 935fcc56abc3 ("dm mpath: only flush workqueue when needed") changed flush_multipath_work() to avoid needless workqueue flushing (of a multipath global workqueue). But that change didn't realize the surrounding flush_multipath_work() code should also only run if 'pg_init_in_progress' is set. Fix this by only doing all of flush_multipath_work()'s PG init related work if 'pg_init_in_progress' is set. Otherwise multipath_wait_for_pg_init_completion() will run unconditionally but the preceeding flush_workqueue(kmpath_handlerd) may not. This could lead to deadlock (though only if kmpath_handlerd never runs a corresponding work to decrement 'pg_init_in_progress'). It could also be, though highly unlikely, that the kmpath_handlerd work that does PG init completes before 'pg_init_in_progress' is set, and then an intervening DM table reload's multipath_postsuspend() triggers flush_multipath_work(). Fixes: 935fcc56abc3 ("dm mpath: only flush workqueue when needed") Cc: stable@vger.kernel.org Reported-by: Ben Marzinski <bmarzins@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-09dm writecache: handle DAX to partitions on persistent memory correctlyMikulas Patocka1-2/+10
commit f9e040efcc28309e5c592f7e79085a9a52e31f58 upstream. The function dax_direct_access doesn't take partitions into account, it always maps pages from the beginning of the device. Therefore, persistent_memory_claim() must get the partition offset using get_start_sect() and add it to the page offsets passed to dax_direct_access(). Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Fixes: 48debafe4f2f ("dm: add writecache target") Cc: stable@vger.kernel.org # 4.18+ Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-26bcache: avoid nr_stripes overflow in bcache_device_init()Coly Li1-6/+6
[ Upstream commit 65f0f017e7be8c70330372df23bcb2a407ecf02d ] For some block devices which large capacity (e.g. 8TB) but small io_opt size (e.g. 8 sectors), in bcache_device_init() the stripes number calcu- lated by, DIV_ROUND_UP_ULL(sectors, d->stripe_size); might be overflow to the unsigned int bcache_device->nr_stripes. This patch uses the uint64_t variable to store DIV_ROUND_UP_ULL() and after the value is checked to be available in unsigned int range, sets it to bache_device->nr_stripes. Then the overflow is avoided. Reported-and-tested-by: Ken Raeburn <raeburn@redhat.com> Signed-off-by: Coly Li <colyli@suse.de> Cc: stable@vger.kernel.org Link: https://bugzilla.redhat.com/show_bug.cgi?id=1783075 Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-21md-cluster: Fix potential error pointer dereference in resize_bitmaps()Dan Carpenter1-0/+1
[ Upstream commit e8abe1de43dac658dacbd04a4543e0c988a8d386 ] The error handling calls md_bitmap_free(bitmap) which checks for NULL but will Oops if we pass an error pointer. Let's set "bitmap" to NULL on this error path. Fixes: afd756286083 ("md-cluster/raid10: resize all the bitmaps before start reshape") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-21dm rq: don't call blk_mq_queue_stopped() in dm_stop_queue()Ming Lei1-3/+0
[ Upstream commit e766668c6cd49d741cfb49eaeb38998ba34d27bc ] dm_stop_queue() only uses blk_mq_quiesce_queue() so it doesn't formally stop the blk-mq queue; therefore there is no point making the blk_mq_queue_stopped() check -- it will never be stopped. In addition, even though dm_stop_queue() actually tries to quiesce hw queues via blk_mq_quiesce_queue(), checking with blk_queue_quiesced() to avoid unnecessary queue quiesce isn't reliable because: the QUEUE_FLAG_QUIESCED flag is set before synchronize_rcu() and dm_stop_queue() may be called when synchronize_rcu() from another blk_mq_quiesce_queue() is in-progress. Fixes: 7b17c2f7292ba ("dm: Fix a race condition related to stopping and starting queues") Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-21bcache: fix overflow in offset_to_stripe()Coly Li3-8/+27
commit 7a1481267999c02abf4a624515c1b5c7c1fccbd6 upstream. offset_to_stripe() returns the stripe number (in type unsigned int) from an offset (in type uint64_t) by the following calculation, do_div(offset, d->stripe_size); For large capacity backing device (e.g. 18TB) with small stripe size (e.g. 4KB), the result is 4831838208 and exceeds UINT_MAX. The actual returned value which caller receives is 536870912, due to the overflow. Indeed in bcache_device_init(), bcache_device->nr_stripes is limited in range [1, INT_MAX]. Therefore all valid stripe numbers in bcache are in range [0, bcache_dev->nr_stripes - 1]. This patch adds a upper limition check in offset_to_stripe(): the max valid stripe number should be less than bcache_device->nr_stripes. If the calculated stripe number from do_div() is equal to or larger than bcache_device->nr_stripe, -EINVAL will be returned. (Normally nr_stripes is less than INT_MAX, exceeding upper limitation doesn't mean overflow, therefore -EOVERFLOW is not used as error code.) This patch also changes nr_stripes' type of struct bcache_device from 'unsigned int' to 'int', and return value type of offset_to_stripe() from 'unsigned int' to 'int', to match their exact data ranges. All locations where bcache_device->nr_stripes and offset_to_stripe() are referenced also get updated for the above type change. Reported-and-tested-by: Ken Raeburn <raeburn@redhat.com> Signed-off-by: Coly Li <colyli@suse.de> Cc: stable@vger.kernel.org Link: https://bugzilla.redhat.com/show_bug.cgi?id=1783075 Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-21bcache: allocate meta data pages as compound pagesColy Li4-5/+5
commit 5fe48867856367142d91a82f2cbf7a57a24cbb70 upstream. There are some meta data of bcache are allocated by multiple pages, and they are used as bio bv_page for I/Os to the cache device. for example cache_set->uuids, cache->disk_buckets, journal_write->data, bset_tree->data. For such meta data memory, all the allocated pages should be treated as a single memory block. Then the memory management and underlying I/O code can treat them more clearly. This patch adds __GFP_COMP flag to all the location allocating >0 order pages for the above mentioned meta data. Then their pages are treated as compound pages now. Signed-off-by: Coly Li <colyli@suse.de> Cc: stable@vger.kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-21md/raid5: Fix Force reconstruct-write io stuck in degraded raid5ChangSyun Peng1-1/+2
commit a1c6ae3d9f3dd6aa5981a332a6f700cf1c25edef upstream. In degraded raid5, we need to read parity to do reconstruct-write when data disks fail. However, we can not read parity from handle_stripe_dirtying() in force reconstruct-write mode. Reproducible Steps: 1. Create degraded raid5 mdadm -C /dev/md2 --assume-clean -l5 -n3 /dev/sda2 /dev/sdb2 missing 2. Set rmw_level to 0 echo 0 > /sys/block/md2/md/rmw_level 3. IO to raid5 Now some io may be stuck in raid5. We can use handle_stripe_fill() to read the parity in this situation. Cc: <stable@vger.kernel.org> # v4.4+ Reviewed-by: Alex Wu <alexwu@synology.com> Reviewed-by: BingJing Chang <bingjingc@synology.com> Reviewed-by: Danny Shih <dannyshih@synology.com> Signed-off-by: ChangSyun Peng <allenpeng@synology.com> Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-19bcache: fix super block seq numbers comparision in register_cache_set()Coly Li1-1/+8
[ Upstream commit 117f636ea695270fe492d0c0c9dfadc7a662af47 ] In register_cache_set(), c is pointer to struct cache_set, and ca is pointer to struct cache, if ca->sb.seq > c->sb.seq, it means this registering cache has up to date version and other members, the in- memory version and other members should be updated to the newer value. But current implementation makes a cache set only has a single cache device, so the above assumption works well except for a special case. The execption is when a cache device new created and both ca->sb.seq and c->sb.seq are 0, because the super block is never flushed out yet. In the location for the following if() check, 2156 if (ca->sb.seq > c->sb.seq) { 2157 c->sb.version = ca->sb.version; 2158 memcpy(c->sb.set_uuid, ca->sb.set_uuid, 16); 2159 c->sb.flags = ca->sb.flags; 2160 c->sb.seq = ca->sb.seq; 2161 pr_debug("set version = %llu\n", c->sb.version); 2162 } c->sb.version is not initialized yet and valued 0. When ca->sb.seq is 0, the if() check will fail (because both values are 0), and the cache set version, set_uuid, flags and seq won't be updated. The above problem is hiden for current code, because the bucket size is compatible among different super block version. And the next time when running cache set again, ca->sb.seq will be larger than 0 and cache set super block version will be updated properly. But if the large bucket feature is enabled, sb->bucket_size is the low 16bits of the bucket size. For a power of 2 value, when the actual bucket size exceeds 16bit width, sb->bucket_size will always be 0. Then read_super_common() will fail because the if() check to is_power_of_2(sb->bucket_size) is false. This is how the long time hidden bug is triggered. This patch modifies the if() check to the following way, 2156 if (ca->sb.seq > c->sb.seq || c->sb.seq == 0) { Then cache set's version, set_uuid, flags and seq will always be updated corectly including for a new created cache device. Signed-off-by: Coly Li <colyli@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-19md-cluster: fix wild pointer of unlock_all_bitmaps()Zhao Heming1-0/+1
[ Upstream commit 60f80d6f2d07a6d8aee485a1d1252327eeee0c81 ] reproduction steps: ``` node1 # mdadm -C /dev/md0 -b clustered -e 1.2 -n 2 -l mirror /dev/sda /dev/sdb node2 # mdadm -A /dev/md0 /dev/sda /dev/sdb node1 # mdadm -G /dev/md0 -b none mdadm: failed to remove clustered bitmap. node1 # mdadm -S --scan ^C <==== mdadm hung & kernel crash ``` kernel stack: ``` [ 335.230657] general protection fault: 0000 [#1] SMP NOPTI [...] [ 335.230848] Call Trace: [ 335.230873] ? unlock_all_bitmaps+0x5/0x70 [md_cluster] [ 335.230886] unlock_all_bitmaps+0x3d/0x70 [md_cluster] [ 335.230899] leave+0x10f/0x190 [md_cluster] [ 335.230932] ? md_super_wait+0x93/0xa0 [md_mod] [ 335.230947] ? leave+0x5/0x190 [md_cluster] [ 335.230973] md_cluster_stop+0x1a/0x30 [md_mod] [ 335.230999] md_bitmap_free+0x142/0x150 [md_mod] [ 335.231013] ? _cond_resched+0x15/0x40 [ 335.231025] ? mutex_lock+0xe/0x30 [ 335.231056] __md_stop+0x1c/0xa0 [md_mod] [ 335.231083] do_md_stop+0x160/0x580 [md_mod] [ 335.231119] ? 0xffffffffc05fb078 [ 335.231148] md_ioctl+0xa04/0x1930 [md_mod] [ 335.231165] ? filename_lookup+0xf2/0x190 [ 335.231179] blkdev_ioctl+0x93c/0xa10 [ 335.231205] ? _cond_resched+0x15/0x40 [ 335.231214] ? __check_object_size+0xd4/0x1a0 [ 335.231224] block_ioctl+0x39/0x40 [ 335.231243] do_vfs_ioctl+0xa0/0x680 [ 335.231253] ksys_ioctl+0x70/0x80 [ 335.231261] __x64_sys_ioctl+0x16/0x20 [ 335.231271] do_syscall_64+0x65/0x1f0 [ 335.231278] entry_SYSCALL_64_after_hwframe+0x44/0xa9 ``` Signed-off-by: Zhao Heming <heming.zhao@suse.com> Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-19md: raid0/linear: fix dereference before null check on pointer mddevColin Ian King1-4/+5
[ Upstream commit 9a5a85972c073f720d81a7ebd08bfe278e6e16db ] Pointer mddev is being dereferenced with a test_bit call before mddev is being null checked, this may cause a null pointer dereference. Fix this by moving the null pointer checks to sanity check mddev before it is dereferenced. Addresses-Coverity: ("Dereference before null check") Fixes: 62f7b1989c02 ("md raid0/linear: Mark array as 'broken' and fail BIOs if a member is gone") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Guilherme G. Piccoli <gpiccoli@canonical.com> Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-29dm integrity: fix integrity recalculation that is improperly skippedMikulas Patocka2-2/+19
commit 5df96f2b9f58a5d2dc1f30fe7de75e197f2c25f2 upstream. Commit adc0daad366b62ca1bce3e2958a40b0b71a8b8b3 ("dm: report suspended device during destroy") broke integrity recalculation. The problem is dm_suspended() returns true not only during suspend, but also during resume. So this race condition could occur: 1. dm_integrity_resume calls queue_work(ic->recalc_wq, &ic->recalc_work) 2. integrity_recalc (&ic->recalc_work) preempts the current thread 3. integrity_recalc calls if (unlikely(dm_suspended(ic->ti))) goto unlock_ret; 4. integrity_recalc exits and no recalculating is done. To fix this race condition, add a function dm_post_suspending that is only true during the postsuspend phase and use it instead of dm_suspended(). Signed-off-by: Mikulas Patocka <mpatocka redhat com> Fixes: adc0daad366b ("dm: report suspended device during destroy") Cc: stable vger kernel org # v4.18+ Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-29dm: use bio_uninit instead of bio_disassociate_blkgChristoph Hellwig1-3/+2
[ Upstream commit 382761dc6312965a11f82f2217e16ec421bf17ae ] bio_uninit is the proper API to clean up a BIO that has been allocated on stack or inside a structure that doesn't come from the BIO allocator. Switch dm to use that instead of bio_disassociate_blkg, which really is an implementation detail. Note that the bio_uninit calls are also moved to the two callers of __send_empty_flush, so that they better pair with the bio_init calls used to initialize them. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-16dm writecache: reject asynchronous pmem devicesMichal Suchanek1-0/+6
commit a46624580376a3a0beb218d94cbc7f258696e29f upstream. DM writecache does not handle asynchronous pmem. Reject it when supplied as cache. Link: https://lore.kernel.org/linux-nvdimm/87lfk5hahc.fsf@linux.ibm.com/ Fixes: 6e84200c0a29 ("virtio-pmem: Add virtio pmem driver") Signed-off-by: Michal Suchanek <msuchanek@suse.de> Acked-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org # 5.3+ Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-16dm: use noio when sending kobject eventMikulas Patocka1-3/+12
commit 6958c1c640af8c3f40fa8a2eee3b5b905d95b677 upstream. kobject_uevent may allocate memory and it may be called while there are dm devices suspended. The allocation may recurse into a suspended device, causing a deadlock. We must set the noio flag when sending a uevent. The observed deadlock was reported here: https://www.redhat.com/archives/dm-devel/2020-March/msg00025.html Reported-by: Khazhismel Kumykov <khazhy@google.com> Reported-by: Tahsin Erdogan <tahsin@google.com> Reported-by: Gabriel Krisman Bertazi <krisman@collabora.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-09dm zoned: assign max_io_len correctlyHou Tao1-1/+1
commit 7b2377486767503d47265e4d487a63c651f6b55d upstream. The unit of max_io_len is sector instead of byte (spotted through code review), so fix it. Fixes: 3b1a94c88b79 ("dm zoned: drive-managed zoned block device target") Cc: stable@vger.kernel.org Signed-off-by: Hou Tao <houtao1@huawei.com> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-30dm writecache: add cond_resched to loop in persistent_memory_claim()Mikulas Patocka1-0/+2
commit d35bd764e6899a7bea71958f08d16cea5bfa1919 upstream. Add cond_resched() to a loop that fills in the mapper memory area because the loop can be executed many times. Fixes: 48debafe4f2fe ("dm: add writecache target") Cc: stable@vger.kernel.org Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-02 03:37:13 +0300