| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
[ Upstream commit 104212471b1c1817b311771d817fb692af983173 ]
In line 2884, "raid5_release_stripe(sh);" drops the reference to sh and
may cause sh to be released. However, sh is subsequently used in lines
2886 "if (sh->batch_head && sh != sh->batch_head)". This may result in an
use-after-free bug.
It can be fixed by moving "raid5_release_stripe(sh);" to the bottom of
the function.
Signed-off-by: Wentao_Liang <Wentao_Liang_g@163.com>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6e3f50d30af847bebce072182bd735e90a294c6a ]
The check in raid5_make_request differs very slightly from the logic
that causes it to block lower down. This likely does not cause a bug
as the check is fuzzy anyway (as reshape may move on between the first
check and the subsequent check). However, make it consistent so it can
be cleaned up in a subsequent patch.
The condition which causes the schedule is:
!(mddev->reshape_backwards ? logical_sector < conf->reshape_progress :
logical_sector >= conf->reshape_progress) &&
(mddev->reshape_backwards ? logical_sector < conf->reshape_safe :
logical_sector >= conf->reshape_safe)
The condition that causes the early bailout is made to match this.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9973f0fa7d20269fe6fefe6333997fb5914449c1 ]
The mdadm test 07layouts randomly produces a kernel hung task deadlock.
The deadlock is caused by the suspend_lo/suspend_hi files being set by
the mdadm background process during reshape and not being cleared
because the process hangs. (Leaving aside the issue of the fragility of
freezing kernel tasks by buggy userspace processes...)
When the background mdadm process hangs it, is waiting (without a
timeout) on a change to the sync_completed file signalling that the
reshape has completed. The process is woken up a couple times when
the reshape finishes but it is woken up before MD_RECOVERY_RUNNING
is cleared so sync_completed_show() reports 0 instead of "none".
To fix this, notify the sysfs file in md_reap_sync_thread() after
MD_RECOVERY_RUNNING has been cleared. This wakes up mdadm and causes
it to continue and write to suspend_lo/suspend_hi to allow IO to
continue.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9dd1cd3220eca534f2d47afad7ce85f4c40118d8 ]
Commit ca522482e3eaf ("dm: pass NULL bdev to bio_alloc_clone")
introduced the optimization to _not_ perform bio_associate_blkg()'s
relatively costly work when DM core clones its bio. But in doing so it
exposed the possibility for DM's cloned bio to alter DM target
behavior (e.g. crash) if a target were to issue IO without first
calling bio_set_dev().
The DM raid target can trigger an MD crash due to its need to split
the DM bio that is passed to md_handle_request(). The split will
recurse to submit_bio_noacct() using a bio with an uninitialized
->bi_blkg. This NULL bio->bi_blkg causes blk_throtl_bio() to
dereference a NULL blkg_to_tg(bio->bi_blkg).
Fix this in DM core by adding a new 'needs_bio_set_dev' target flag that
will make alloc_tio() call bio_set_dev() on behalf of the target.
dm-raid is the only target that requires this flag. bio_set_dev()
initializes the DM cloned bio's ->bi_blkg, using bio_associate_blkg,
before passing the bio to md_handle_request().
Long-term fix would be to audit and refactor MD code to rely on DM to
split its bio, using dm_accept_partial_bio(), but there are MD raid
personalities (e.g. raid1 and raid10) whose implementation are tightly
coupled to handling the bio splitting inline.
Fixes: ca522482e3eaf ("dm: pass NULL bdev to bio_alloc_clone")
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7dad24db59d2d2803576f2e3645728866a056dab ]
There is a KASAN warning in raid_resume when running the lvm test
lvconvert-raid.sh. The reason for the warning is that mddev->raid_disks
is greater than rs->raid_disks, so the loop touches one entry beyond
the allocated length.
Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1fbeea217d8f297fe0e0956a1516d14ba97d0396 ]
There is this warning when using a kernel with the address sanitizer
and running this testsuite:
https://gitlab.com/cki-project/kernel-tests/-/tree/main/storage/swraid/scsi_raid
==================================================================
BUG: KASAN: slab-out-of-bounds in raid_status+0x1747/0x2820 [dm_raid]
Read of size 4 at addr ffff888079d2c7e8 by task lvcreate/13319
CPU: 0 PID: 13319 Comm: lvcreate Not tainted 5.18.0-0.rc3.<snip> #1
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
Call Trace:
<TASK>
dump_stack_lvl+0x6a/0x9c
print_address_description.constprop.0+0x1f/0x1e0
print_report.cold+0x55/0x244
kasan_report+0xc9/0x100
raid_status+0x1747/0x2820 [dm_raid]
dm_ima_measure_on_table_load+0x4b8/0xca0 [dm_mod]
table_load+0x35c/0x630 [dm_mod]
ctl_ioctl+0x411/0x630 [dm_mod]
dm_ctl_ioctl+0xa/0x10 [dm_mod]
__x64_sys_ioctl+0x12a/0x1a0
do_syscall_64+0x5b/0x80
The warning is caused by reading conf->max_nr_stripes in raid_status. The
code in raid_status reads mddev->private, casts it to struct r5conf and
reads the entry max_nr_stripes.
However, if we have different raid type than 4/5/6, mddev->private
doesn't point to struct r5conf; it may point to struct r0conf, struct
r1conf, struct r10conf or struct mpconf. If we cast a pointer to one
of these structs to struct r5conf, we will be reading invalid memory
and KASAN warns about it.
Fix this bug by reading struct r5conf only if raid type is 4, 5 or 6.
Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3534e5a5ed2997ca1b00f44a0378a075bd05e8a3 ]
Fault inject on pool metadata device reports:
BUG: KASAN: use-after-free in dm_pool_register_metadata_threshold+0x40/0x80
Read of size 8 at addr ffff8881b9d50068 by task dmsetup/950
CPU: 7 PID: 950 Comm: dmsetup Tainted: G W 5.19.0-rc6 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x34/0x44
print_address_description.constprop.0.cold+0xeb/0x3f4
kasan_report.cold+0xe6/0x147
dm_pool_register_metadata_threshold+0x40/0x80
pool_ctr+0xa0a/0x1150
dm_table_add_target+0x2c8/0x640
table_load+0x1fd/0x430
ctl_ioctl+0x2c4/0x5a0
dm_ctl_ioctl+0xa/0x10
__x64_sys_ioctl+0xb3/0xd0
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
This can be easily reproduced using:
echo offline > /sys/block/sda/device/state
dd if=/dev/zero of=/dev/mapper/thin bs=4k count=10
dmsetup load pool --table "0 20971520 thin-pool /dev/sda /dev/sdb 128 0 0"
If a metadata commit fails, the transaction will be aborted and the
metadata space maps will be destroyed. If a DM table reload then
happens for this failed thin-pool, a use-after-free will occur in
dm_sm_register_threshold_callback (called from
dm_pool_register_metadata_threshold).
Fix this by in dm_pool_register_metadata_threshold() by returning the
-EINVAL error if the thin-pool is in fail mode. Also fail pool_ctr()
with a new error message: "Error registering metadata threshold".
Fixes: ac8c3f3df65e4 ("dm thin: generate event when metadata threshold passed")
Cc: stable@vger.kernel.org
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Luo Meng <luomeng12@huawei.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ca7dc242e358e46d963b32f9d9dd829785a9e957 ]
dm-writecache has the capability to limit the number of writeback jobs
in progress. However, this feature was off by default. As such there
were some out-of-memory crashes observed when lowering the low
watermark while the cache is full.
This commit enables writeback limit by default. It is set to 256MiB or
1/16 of total system memory, whichever is smaller.
Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e120a5f1e78fab6223544e425015f393d90d6f0d ]
Otherwise PR ops may be issued while the broader DM device is being
reconfigured, etc.
Fixes: 9c72bad1f31a ("dm: call PR reserve/unreserve on each underlying device")
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2ee73ef60db4d79b9f9b8cd501e8188b5179449f ]
Change dm-writecache, so that it counts the number of blocks discarded
instead of the number of discard bios. Make it consistent with the
read and write statistics counters that were changed to count the
number of blocks instead of bios.
Fixes: e3a35d03407c ("dm writecache: add event counters")
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b2676e1482af89714af6988ce5d31a84692e2530 ]
Change dm-writecache, so that it counts the number of blocks written
instead of the number of write bios. Bios can be split and requeued
using the dm_accept_partial_bio function, so counting bios caused
inaccurate results.
Fixes: e3a35d03407c ("dm writecache: add event counters")
Reported-by: Yu Kuai <yukuai1@huaweicloud.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2c6e755b49d273243431f5f1184654e71221fc78 ]
Change dm-writecache, so that it counts the number of blocks read
instead of the number of read bios. Bios can be split and requeued
using the dm_accept_partial_bio function, so counting bios caused
inaccurate results.
Fixes: e3a35d03407c ("dm writecache: add event counters")
Reported-by: Yu Kuai <yukuai1@huaweicloud.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9bc0c92e4b82adb017026dbb2aa816b1ac2bef31 ]
The functions writecache_map_remap_origin and writecache_bio_copy_ssd
only return a single value, thus they can be made to return void.
This helps simplify the following IO accounting changes.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit d17f744e883b2f8d13cca252d71cfe8ace346f7d upstream.
There's a KASAN warning in raid10_remove_disk when running the lvm
test lvconvert-raid-reshape.sh. We fix this warning by verifying that the
value "number" is valid.
BUG: KASAN: slab-out-of-bounds in raid10_remove_disk+0x61/0x2a0 [raid10]
Read of size 8 at addr ffff889108f3d300 by task mdX_raid10/124682
CPU: 3 PID: 124682 Comm: mdX_raid10 Not tainted 5.19.0-rc6 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x34/0x44
print_report.cold+0x45/0x57a
? __lock_text_start+0x18/0x18
? raid10_remove_disk+0x61/0x2a0 [raid10]
kasan_report+0xa8/0xe0
? raid10_remove_disk+0x61/0x2a0 [raid10]
raid10_remove_disk+0x61/0x2a0 [raid10]
Buffer I/O error on dev dm-76, logical block 15344, async page read
? __mutex_unlock_slowpath.constprop.0+0x1e0/0x1e0
remove_and_add_spares+0x367/0x8a0 [md_mod]
? super_written+0x1c0/0x1c0 [md_mod]
? mutex_trylock+0xac/0x120
? _raw_spin_lock+0x72/0xc0
? _raw_spin_lock_bh+0xc0/0xc0
md_check_recovery+0x848/0x960 [md_mod]
raid10d+0xcf/0x3360 [raid10]
? sched_clock_cpu+0x185/0x1a0
? rb_erase+0x4d4/0x620
? var_wake_function+0xe0/0xe0
? psi_group_change+0x411/0x500
? preempt_count_sub+0xf/0xc0
? _raw_spin_lock_irqsave+0x78/0xc0
? __lock_text_start+0x18/0x18
? raid10_sync_request+0x36c0/0x36c0 [raid10]
? preempt_count_sub+0xf/0xc0
? _raw_spin_unlock_irqrestore+0x19/0x40
? del_timer_sync+0xa9/0x100
? try_to_del_timer_sync+0xc0/0xc0
? _raw_spin_lock_irqsave+0x78/0xc0
? __lock_text_start+0x18/0x18
? _raw_spin_unlock_irq+0x11/0x24
? __list_del_entry_valid+0x68/0xa0
? finish_wait+0xa3/0x100
md_thread+0x161/0x260 [md_mod]
? unregister_md_personality+0xa0/0xa0 [md_mod]
? _raw_spin_lock_irqsave+0x78/0xc0
? prepare_to_wait_event+0x2c0/0x2c0
? unregister_md_personality+0xa0/0xa0 [md_mod]
kthread+0x148/0x180
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x1f/0x30
</TASK>
Allocated by task 124495:
kasan_save_stack+0x1e/0x40
__kasan_kmalloc+0x80/0xa0
setup_conf+0x140/0x5c0 [raid10]
raid10_run+0x4cd/0x740 [raid10]
md_run+0x6f9/0x1300 [md_mod]
raid_ctr+0x2531/0x4ac0 [dm_raid]
dm_table_add_target+0x2b0/0x620 [dm_mod]
table_load+0x1c8/0x400 [dm_mod]
ctl_ioctl+0x29e/0x560 [dm_mod]
dm_compat_ctl_ioctl+0x7/0x20 [dm_mod]
__do_compat_sys_ioctl+0xfa/0x160
do_syscall_64+0x90/0xc0
entry_SYSCALL_64_after_hwframe+0x46/0xb0
Last potentially related work creation:
kasan_save_stack+0x1e/0x40
__kasan_record_aux_stack+0x9e/0xc0
kvfree_call_rcu+0x84/0x480
timerfd_release+0x82/0x140
L __fput+0xfa/0x400
task_work_run+0x80/0xc0
exit_to_user_mode_prepare+0x155/0x160
syscall_exit_to_user_mode+0x12/0x40
do_syscall_64+0x42/0xc0
entry_SYSCALL_64_after_hwframe+0x46/0xb0
Second to last potentially related work creation:
kasan_save_stack+0x1e/0x40
__kasan_record_aux_stack+0x9e/0xc0
kvfree_call_rcu+0x84/0x480
timerfd_release+0x82/0x140
__fput+0xfa/0x400
task_work_run+0x80/0xc0
exit_to_user_mode_prepare+0x155/0x160
syscall_exit_to_user_mode+0x12/0x40
do_syscall_64+0x42/0xc0
entry_SYSCALL_64_after_hwframe+0x46/0xb0
The buggy address belongs to the object at ffff889108f3d200
which belongs to the cache kmalloc-256 of size 256
The buggy address is located 0 bytes to the right of
256-byte region [ffff889108f3d200, ffff889108f3d300)
The buggy address belongs to the physical page:
page:000000007ef2a34c refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1108f3c
head:000000007ef2a34c order:2 compound_mapcount:0 compound_pincount:0
flags: 0x4000000000010200(slab|head|zone=2)
raw: 4000000000010200 0000000000000000 dead000000000001 ffff889100042b40
raw: 0000000000000000 0000000080200020 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff889108f3d200: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff889108f3d280: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffff889108f3d300: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
^
ffff889108f3d380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff889108f3d400: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e151db8ecfb019b7da31d076130a794574c89f6f upstream.
When we ran the lvm test "shell/integrity-blocksize-3.sh" on a kernel with
kasan, we got failure in write_page.
The reason for the failure is that md_bitmap_destroy is called before
destroying the thread and the thread may be waiting in the function
write_page for the bio to complete. When the thread finishes waiting, it
executes "if (test_bit(BITMAP_WRITE_ERROR, &bitmap->flags))", which
triggers the kasan warning.
Note that the commit 48df498daf62 that caused this bug claims that it is
neede for md-cluster, you should check md-cluster and possibly find
another bugfix for it.
BUG: KASAN: use-after-free in write_page+0x18d/0x680 [md_mod]
Read of size 8 at addr ffff889162030c78 by task mdX_raid1/5539
CPU: 10 PID: 5539 Comm: mdX_raid1 Not tainted 5.19.0-rc2 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x34/0x44
print_report.cold+0x45/0x57a
? __lock_text_start+0x18/0x18
? write_page+0x18d/0x680 [md_mod]
kasan_report+0xa8/0xe0
? write_page+0x18d/0x680 [md_mod]
kasan_check_range+0x13f/0x180
write_page+0x18d/0x680 [md_mod]
? super_sync+0x4d5/0x560 [dm_raid]
? md_bitmap_file_kick+0xa0/0xa0 [md_mod]
? rs_set_dev_and_array_sectors+0x2e0/0x2e0 [dm_raid]
? mutex_trylock+0x120/0x120
? preempt_count_add+0x6b/0xc0
? preempt_count_sub+0xf/0xc0
md_update_sb+0x707/0xe40 [md_mod]
md_reap_sync_thread+0x1b2/0x4a0 [md_mod]
md_check_recovery+0x533/0x960 [md_mod]
raid1d+0xc8/0x2a20 [raid1]
? var_wake_function+0xe0/0xe0
? psi_group_change+0x411/0x500
? preempt_count_sub+0xf/0xc0
? _raw_spin_lock_irqsave+0x78/0xc0
? __lock_text_start+0x18/0x18
? raid1_end_read_request+0x2a0/0x2a0 [raid1]
? preempt_count_sub+0xf/0xc0
? _raw_spin_unlock_irqrestore+0x19/0x40
? del_timer_sync+0xa9/0x100
? try_to_del_timer_sync+0xc0/0xc0
? _raw_spin_lock_irqsave+0x78/0xc0
? __lock_text_start+0x18/0x18
? __list_del_entry_valid+0x68/0xa0
? finish_wait+0xa3/0x100
md_thread+0x161/0x260 [md_mod]
? unregister_md_personality+0xa0/0xa0 [md_mod]
? _raw_spin_lock_irqsave+0x78/0xc0
? prepare_to_wait_event+0x2c0/0x2c0
? unregister_md_personality+0xa0/0xa0 [md_mod]
kthread+0x148/0x180
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x1f/0x30
</TASK>
Allocated by task 5522:
kasan_save_stack+0x1e/0x40
__kasan_kmalloc+0x80/0xa0
md_bitmap_create+0xa8/0xe80 [md_mod]
md_run+0x777/0x1300 [md_mod]
raid_ctr+0x249c/0x4a30 [dm_raid]
dm_table_add_target+0x2b0/0x620 [dm_mod]
table_load+0x1c8/0x400 [dm_mod]
ctl_ioctl+0x29e/0x560 [dm_mod]
dm_compat_ctl_ioctl+0x7/0x20 [dm_mod]
__do_compat_sys_ioctl+0xfa/0x160
do_syscall_64+0x90/0xc0
entry_SYSCALL_64_after_hwframe+0x46/0xb0
Freed by task 5680:
kasan_save_stack+0x1e/0x40
kasan_set_track+0x21/0x40
kasan_set_free_info+0x20/0x40
__kasan_slab_free+0xf7/0x140
kfree+0x80/0x240
md_bitmap_free+0x1c3/0x280 [md_mod]
__md_stop+0x21/0x120 [md_mod]
md_stop+0x9/0x40 [md_mod]
raid_dtr+0x1b/0x40 [dm_raid]
dm_table_destroy+0x98/0x1e0 [dm_mod]
__dm_destroy+0x199/0x360 [dm_mod]
dev_remove+0x10c/0x160 [dm_mod]
ctl_ioctl+0x29e/0x560 [dm_mod]
dm_compat_ctl_ioctl+0x7/0x20 [dm_mod]
__do_compat_sys_ioctl+0xfa/0x160
do_syscall_64+0x90/0xc0
entry_SYSCALL_64_after_hwframe+0x46/0xb0
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Fixes: 48df498daf62 ("md: move bitmap_destroy to the beginning of __md_stop")
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Pull block fix from Jens Axboe:
"Just a single fix for missing error propagation for an allocation
failure in raid5"
* tag 'block-5.19-2022-07-21' of git://git.kernel.dk/linux-block:
md/raid5: missing error code in setup_conf()
|
|
Return -ENOMEM if the allocation fails. Don't return success.
Fixes: 8fbcba6b999b ("md/raid5: Cleanup setup_conf() error returns")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Song Liu <song@kernel.org>
|
|
There's a KASAN warning in raid5_add_disk when running the LVM testsuite.
The warning happens in the test
lvconvert-raid-reshape-linear_to_raid6-single-type.sh. We fix the warning
by verifying that rdev->saved_raid_disk is within limits.
Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
There's a KASAN warning in raid5_remove_disk when running the LVM
testsuite. We fix this warning by verifying that the "number" variable is
within limits.
Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
On dm-raid table load (using raid_ctr), dm-raid allocates an array
rs->devs[rs->raid_disks] for the raid device members. rs->raid_disks
is defined by the number of raid metadata and image tupples passed
into the target's constructor.
In the case of RAID layout changes being requested, that number can be
different from the current number of members for existing raid sets as
defined in their superblocks. Example RAID layout changes include:
- raid1 legs being added/removed
- raid4/5/6/10 number of stripes changed (stripe reshaping)
- takeover to higher raid level (e.g. raid5 -> raid6)
When accessing array members, rs->raid_disks must be used in control
loops instead of the potentially larger value in rs->md.raid_disks.
Otherwise it will cause memory access beyond the end of the rs->devs
array.
Fix this by changing code that is prone to out-of-bounds access.
Also fix validate_raid_redundancy() to validate all devices that are
added. Also, use braces to help clean up raid_iterate_devices().
The out-of-bounds memory accesses was discovered using KASAN.
This commit was verified to pass all LVM2 RAID tests (with KASAN
enabled).
Cc: stable@vger.kernel.org
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
Commit 85e123c27d5c ("dm mirror log: round up region bitmap size to
BITS_PER_LONG") introduced a regression on 64-bit architectures in the
lvm testsuite tests: lvcreate-mirror, mirror-names and vgsplit-operation.
If the device is shrunk, we need to clear log bits beyond the end of the
device. The code clears bits up to a 32-bit boundary and then calculates
lc->sync_count by summing set bits up to a 64-bit boundary (the commit
changed that; previously, this boundary was 32-bit too). So, it was using
some non-zeroed bits in the calculation and this caused misbehavior.
Fix this regression by clearing bits up to BITS_PER_LONG boundary.
Fixes: 85e123c27d5c ("dm mirror log: round up region bitmap size to BITS_PER_LONG")
Cc: stable@vger.kernel.org
Reported-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
Commit 7dd76d1feec7 ("dm: improve bio splitting and associated IO
accounting") removed using cloned bio when dm io splitting is needed.
Using bio_trim()+bio_inc_remaining() rather than bio_split()+bio_chain()
causes multiple dm_io instances to share the same original bio, and it
works fine if IOs are completed successfully.
But a regression was caused for the case when BLK_STS_DM_REQUEUE is
returned from any one of DM's cloned bios (whose dm_io share the same
orig_bio). In this BLK_STS_DM_REQUEUE case only the mapped subset of
the original bio for the current exact dm_io needs to be re-submitted.
However, since the original bio is shared among all dm_io instances,
the ->orig_bio actually only represents the last dm_io instance, so
requeue can't work as expected. Also when more than one dm_io is
requeued, the same original bio is requeued from all dm_io's
completion handler, then race is caused.
Fix this issue by still allocating one clone bio for completing io
only, then io accounting can rely on ->orig_bio being unmodified. This
is needed because the dm_io's sector_offset and sectors members are
recorded relative to an unmodified ->orig_bio.
In the future, we can go back to using bio_trim()+bio_inc_remaining()
for dm's io splitting but then delay needing a bio clone only when
handling BLK_STS_DM_REQUEUE, but that approach is a bit complicated
(so it needs a development cycle):
1) bio clone needs to be done in task context
2) a block interface for unwinding bio is required
Fixes: 7dd76d1feec7 ("dm: improve bio splitting and associated IO accounting")
Reported-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
Commit 5291984004edf ("dm: fix bio polling to handle possibile
BLK_STS_AGAIN") inadvertently introduced an early return from
dm_io_complete() without first queueing the bio to DM if BLK_STS_AGAIN
occurs and bio-polling is _not_ being used.
Fix this by only returning early from dm_io_complete() if the bio has
first been properly queued to DM. Otherwise, the bio will never finish
via bio_endio.
Fixes: 5291984004edf ("dm: fix bio polling to handle possibile BLK_STS_AGAIN")
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
During postsuspend dm-era does the following:
1. Archives the current era
2. Commits the metadata, as part of the RPC call for archiving the
current era
3. Stops the worker
Until the worker stops, it might write to the metadata again. Moreover,
these writes are not flushed to disk immediately, but are cached by the
dm-bufio client, which writes them back asynchronously.
As a result, the committed metadata of a suspended dm-era device might
not be consistent with the in-core metadata.
In some cases, this can result in the corruption of the on-disk
metadata. Suppose the following sequence of events:
1. Load a new table, e.g. a snapshot-origin table, to a device with a
dm-era table
2. Suspend the device
3. dm-era commits its metadata, but the worker does a few more metadata
writes until it stops, as part of digesting an archived writeset
4. These writes are cached by the dm-bufio client
5. Load the dm-era table to another device.
6. The new instance of the dm-era target loads the committed, on-disk
metadata, which don't include the extra writes done by the worker
after the metadata commit.
7. Resume the new device
8. The new dm-era target instance starts using the metadata
9. Resume the original device
10. The destructor of the old dm-era target instance is called and
destroys the dm-bufio client, which results in flushing the cached
writes to disk
11. These writes might overwrite the writes done by the new dm-era
instance, hence corrupting its metadata.
Fix this by committing the metadata after the worker stops running.
stop_worker uses flush_workqueue to flush the current work. However, the
work item may re-queue itself and flush_workqueue doesn't wait for
re-queued works to finish.
This could result in the worker changing the metadata after they have
been committed, or writing to the metadata concurrently with the commit
in the postsuspend thread.
Use drain_workqueue instead, which waits until the work and all
re-queued works finish.
Fixes: eec40579d8487 ("dm: add era target")
Cc: stable@vger.kernel.org # v3.15+
Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
Pull block fixes from Jens Axboe:
- NVMe pull request from Christoph
- Quirks, quirks, quirks to work around buggy consumer grade
devices (Keith Bush, Ning Wang, Stefan Reiter, Rasheed Hsueh)
- Better kernel messages for devices that need quirking (Keith
Bush)
- Make a kernel message more useful (Thomas Weißschuh)
- MD pull request from Song, with a few fixes
- blk-mq sysfs locking fixes (Ming)
- BFQ stats fix (Bart)
- blk-mq offline queue fix (Bart)
- blk-mq flush request tag fix (Ming)
* tag 'block-5.19-2022-06-16' of git://git.kernel.dk/linux-block:
block/bfq: Enable I/O statistics
blk-mq: don't clear flush_rq from tags->rqs[]
blk-mq: avoid to touch q->elevator without any protection
blk-mq: protect q->elevator by ->sysfs_lock in blk_mq_elv_switch_none
block: Fix handling of offline queues in blk_mq_alloc_request_hctx()
md/raid5-ppl: Fix argument order in bio_alloc_bioset()
Revert "md: don't unregister sync_thread with reconfig_mutex held"
nvme-pci: disable write zeros support on UMIC and Samsung SSDs
nvme-pci: avoid the deepest sleep state on ZHITAI TiPro7000 SSDs
nvme-pci: sk hynix p31 has bogus namespace ids
nvme-pci: smi has bogus namespace ids
nvme-pci: phison e12 has bogus namespace ids
nvme-pci: add NVME_QUIRK_BOGUS_NID for ADATA XPG GAMMIX S50
nvme-pci: add trouble shooting steps for timeouts
nvme: add bug report info for global duplicate id
nvme: add device name to warning in uuid_show()
|
|
The code in dm-log rounds up bitset_size to 32 bits. It then uses
find_next_zero_bit_le on the allocated region. find_next_zero_bit_le
accesses the bitmap using unsigned long pointers. So, on 64-bit
architectures, it may access 4 bytes beyond the allocated size.
Fix this bug by rounding up bitset_size to BITS_PER_LONG.
This bug was found by running the lvm2 testsuite with kasan.
Fixes: 29121bd0b00e ("[PATCH] dm mirror log: bitset_size fix")
Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
Starting with the commit 63a225c9fd20, device mapper has an optimization
that it will take cheaper table lock (dm_get_live_table_fast instead of
dm_get_live_table) if the bio has REQ_NOWAIT. The bios with REQ_NOWAIT
must not block in the target request routine, if they did, we would be
blocking while holding rcu_read_lock, which is prohibited.
The targets that are suitable for REQ_NOWAIT optimization (and that don't
block in the map routine) have the flag DM_TARGET_NOWAIT set. Device
mapper will test if all the targets and all the devices in a table
support nowait (see the function dm_table_supports_nowait) and it will set
or clear the QUEUE_FLAG_NOWAIT flag on its request queue according to
this check.
There's a test in submit_bio_noacct: "if ((bio->bi_opf & REQ_NOWAIT) &&
!blk_queue_nowait(q)) goto not_supported" - this will make sure that
REQ_NOWAIT bios can't enter a request queue that doesn't support them.
This mechanism works to prevent REQ_NOWAIT bios from reaching dm targets
that don't support the REQ_NOWAIT flag (and that may block in the map
routine) - except that there is a small race condition:
submit_bio_noacct checks if the queue has the QUEUE_FLAG_NOWAIT without
holding any locks. Immediatelly after this check, the device mapper table
may be reloaded with a table that doesn't support REQ_NOWAIT (for example,
if we start moving the logical volume or if we activate a snapshot).
However the REQ_NOWAIT bio that already passed the check in
submit_bio_noacct would be sent to device mapper, where it could be
redirected to a dm target that doesn't support REQ_NOWAIT - the result is
sleeping while we hold rcu_read_lock.
In order to fix this race, we double-check if the target supports
REQ_NOWAIT while we hold the table lock (so that the table can't change
under us).
Fixes: 563a225c9fd2 ("dm: introduce dm_{get,put}_live_table_bio called from dm_submit_bio")
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
dm_put_live_table_bio is called from the end of dm_submit_bio.
However, at this point, the bio may be already finished and the caller
may have freed the bio. Consequently, dm_put_live_table_bio accesses
the stale "bio" pointer.
Fix this bug by loading the bi_opf value and passing it to
dm_get_live_table_bio and dm_put_live_table_bio instead of the bio.
This bug was found by running the lvm2 testsuite with kasan.
Fixes: 563a225c9fd2 ("dm: introduce dm_{get,put}_live_table_bio called from dm_submit_bio")
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
bio_alloc_bioset() takes a block device, number of vectors, the
OP flags, the GFP mask and the bio set. However when the prototype
was changed, the callisite in ppl_do_flush() had the OP flags and
the GFP flags reversed. This introduced some sparse error:
drivers/md/raid5-ppl.c:632:57: warning: incorrect type in argument 3
(different base types)
drivers/md/raid5-ppl.c:632:57: expected unsigned int opf
drivers/md/raid5-ppl.c:632:57: got restricted gfp_t [usertype]
drivers/md/raid5-ppl.c:633:61: warning: incorrect type in argument 4
(different base types)
drivers/md/raid5-ppl.c:633:61: expected restricted gfp_t [usertype]
gfp_mask
drivers/md/raid5-ppl.c:633:61: got unsigned long long
The sparse error introduction may not have been reported correctly by
0day due to other work that was cleaning up other sparse errors in this
area.
Fixes: 609be1066731 ("block: pass a block_device and opf to bio_alloc_bioset")
Cc: stable@vger.kernel.org # 5.18+
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>
|
|
The 07reshape5intr test is broke because of below path.
md_reap_sync_thread
-> mddev_unlock
-> md_unregister_thread(&mddev->sync_thread)
And md_check_recovery is triggered by,
mddev_unlock -> md_wakeup_thread(mddev->thread)
then mddev->reshape_position is set to MaxSector in raid5_finish_reshape
since MD_RECOVERY_INTR is cleared in md_check_recovery, which means
feature_map is not set with MD_FEATURE_RESHAPE_ACTIVE and superblock's
reshape_position can't be updated accordingly.
Fixes: 8b48ec23cc51a ("md: don't unregister sync_thread with reconfig_mutex held")
Reported-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Signed-off-by: Song Liu <song@kernel.org>
|
|
After commit 82f6cdcc3676c ("dm: switch dm_io booleans over to proper
flags") dm_start_io_acct stopped atomically checking and setting
was_accounted, which turned into the DM_IO_ACCOUNTED flag. This opened
the possibility for a race where IO accounting is started twice for
duplicate bios. To remove the race, check the flag while holding the
io->lock.
Fixes: 82f6cdcc3676c ("dm: switch dm_io booleans over to proper flags")
Cc: stable@vger.kernel.org
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
After the commit ca522482e3ea ("dm: pass NULL bdev to bio_alloc_clone"),
clone_endio() only calls dm_zone_endio() when DM targets remap the
clone bio's bdev to something other than the md->disk->part0 default.
However, if a DM target (e.g. dm-crypt) stacked ontop of a dm-zoned
does not remap the clone bio using bio_set_dev() then dm_zone_endio()
is not called at completion of the bios and zone locks are not
properly unlocked. This triggers a hang, in dm_zone_map_bio(), when
blktests block/004 is run for dm-crypt on zoned block devices. To
avoid the hang, simply remove the clone_endio() check that verifies
the target remapped the clone bio to a device other than the default.
Fixes: ca522482e3ea ("dm: pass NULL bdev to bio_alloc_clone")
Reported-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
The use of bioset_init_from_src mean that the pre-allocated pools weren't
used for anything except parameter passing, and the integrity pool
creation got completely lost for the actual live mapped_device. Fix that
by assigning the actual preallocated dm_md_mempools to the mapped_device
and using that for I/O instead of creating new mempools.
Fixes: 2a2a4c510b76 ("dm: use bioset_init_from_src() to copy bio_set")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
Pull more block driver updates from Jens Axboe:
"A collection of stragglers that were late on sending in their changes
and just followup fixes.
- NVMe fixes pull request via Christoph:
- set controller enable bit in a separate write (Niklas Cassel)
- disable namespace identifiers for the MAXIO MAP1001 (Christoph)
- fix a comment typo (Julia Lawall)"
- MD fixes pull request via Song:
- Remove uses of bdevname (Christoph Hellwig)
- Bug fixes (Guoqing Jiang, and Xiao Ni)
- bcache fixes series (Coly)
- null_blk zoned write fix (Damien)
- nbd fixes (Yu, Zhang)
- Fix for loop partition scanning (Christoph)"
* tag 'for-5.19/drivers-2022-06-02' of git://git.kernel.dk/linux-block: (23 commits)
block: null_blk: Fix null_zone_write()
nvmet: fix typo in comment
nvme: set controller enable bit in a separate write
nvme-pci: disable namespace identifiers for the MAXIO MAP1001
bcache: avoid unnecessary soft lockup in kworker update_writeback_rate()
nbd: use pr_err to output error message
nbd: fix possible overflow on 'first_minor' in nbd_dev_add()
nbd: fix io hung while disconnecting device
nbd: don't clear 'NBD_CMD_INFLIGHT' flag if request is not completed
nbd: fix race between nbd_alloc_config() and module removal
nbd: call genl_unregister_family() first in nbd_cleanup()
md: bcache: check the return value of kzalloc() in detached_dev_do_request()
bcache: memset on stack variables in bch_btree_check() and bch_sectors_dirty_init()
block, loop: support partitions without scanning
bcache: avoid journal no-space deadlock by reserving 1 journal bucket
bcache: remove incremental dirty sector counting for bch_sectors_dirty_init()
bcache: improve multithreaded bch_sectors_dirty_init()
bcache: improve multithreaded bch_btree_check()
md: fix double free of io_acct_set bioset
md: Don't set mddev private to NULL in raid0 pers->free
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- Fix DM core's dm_table_supports_poll to return false if target has no
data devices.
- Fix DM verity target so that it cannot be switched to a different DM
target type (e.g. dm-linear) via DM table reload.
* tag 'for-5.19/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm verity: set DM_TARGET_IMMUTABLE feature flag
dm table: fix dm_table_supports_poll to return false if no data devices
|
|
The device-mapper framework provides a mechanism to mark targets as
immutable (and hence fail table reloads that try to change the target
type). Add the DM_TARGET_IMMUTABLE flag to the dm-verity target's
feature flags to prevent switching the verity target with a different
target type.
Fixes: a4ffc152198e ("dm: add verity target")
Cc: stable@vger.kernel.org
Signed-off-by: Sarthak Kukreti <sarthakkukreti@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
It was reported that the "generic/250" test in xfstests (which uses
the dm-error target) demonstrates a regression where the kernel
crashes in bioset_exit().
Since commit cfc97abcbe0b ("dm: conditionally enable
BIOSET_PERCPU_CACHE for dm_io bioset") the bioset_init() for the dm_io
bioset will setup the bioset's per-cpu alloc cache if all devices have
QUEUE_FLAG_POLL set.
But there was an bug where a target that doesn't have any data devices
(and that doesn't even set the .iterate_devices dm target callback)
will incorrectly return true from dm_table_supports_poll().
Fix this by updating dm_table_supports_poll() to follow dm-table.c's
well-worn pattern for testing that _all_ targets in a DM table do in
fact have underlying devices that set QUEUE_FLAG_POLL.
NOTE: An additional block fix is still needed so that
bio_alloc_cache_destroy() clears the bioset's ->cache member.
Otherwise, a DM device's table reload that transitions the DM device's
bioset from using a per-cpu alloc cache to _not_ using one will result
in bioset_exit() crashing in bio_alloc_cache_destroy() because dm's
dm_io bioset ("io_bs") was left with a stale ->cache member.
Fixes: cfc97abcbe0b ("dm: conditionally enable BIOSET_PERCPU_CACHE for dm_io bioset")
Reported-by: Matthew Wilcox <willy@infradead.org>
Reported-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
The kworker routine update_writeback_rate() is schedued to update the
writeback rate in every 5 seconds by default. Before calling
__update_writeback_rate() to do real job, semaphore dc->writeback_lock
should be held by the kworker routine.
At the same time, bcache writeback thread routine bch_writeback_thread()
also needs to hold dc->writeback_lock before flushing dirty data back
into the backing device. If the dirty data set is large, it might be
very long time for bch_writeback_thread() to scan all dirty buckets and
releases dc->writeback_lock. In such case update_writeback_rate() can be
starved for long enough time so that kernel reports a soft lockup warn-
ing started like:
watchdog: BUG: soft lockup - CPU#246 stuck for 23s! [kworker/246:31:179713]
Such soft lockup condition is unnecessary, because after the writeback
thread finishes its job and releases dc->writeback_lock, the kworker
update_writeback_rate() may continue to work and everything is fine
indeed.
This patch avoids the unnecessary soft lockup by the following method,
- Add new member to struct cached_dev
- dc->rate_update_retry (0 by default)
- In update_writeback_rate() call down_read_trylock(&dc->writeback_lock)
firstly, if it fails then lock contention happens.
- If dc->rate_update_retry <= BCH_WBRATE_UPDATE_MAX_SKIPS (15), doesn't
acquire the lock and reschedules the kworker for next try.
- If dc->rate_update_retry > BCH_WBRATE_UPDATE_MAX_SKIPS, no retry
anymore and call down_read(&dc->writeback_lock) to wait for the lock.
By the above method, at worst case update_writeback_rate() may retry for
1+ minutes before blocking on dc->writeback_lock by calling down_read().
For a 4TB cache device with 1TB dirty data, 90%+ of the unnecessary soft
lockup warning message can be avoided.
When retrying to acquire dc->writeback_lock in update_writeback_rate(),
of course the writeback rate cannot be updated. It is fair, because when
the kworker is blocked on the lock contention of dc->writeback_lock, the
writeback rate cannot be updated neither.
This change follows Jens Axboe's suggestion to a more clear and simple
version.
Signed-off-by: Coly Li <colyli@suse.de>
Link: https://lore.kernel.org/r/20220528124550.32834-2-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm and DAX updates from Dan Williams:
"New support for clearing memory errors when a file is in DAX mode,
alongside with some other fixes and cleanups.
Previously it was only possible to clear these errors using a truncate
or hole-punch operation to trigger the filesystem to reallocate the
block, now, any page aligned write can opportunistically clear errors
as well.
This change spans x86/mm, nvdimm, and fs/dax, and has received the
appropriate sign-offs. Thanks to Jane for her work on this.
Summary:
- Add support for clearing memory error via pwrite(2) on DAX
- Fix 'security overwrite' support in the presence of media errors
- Miscellaneous cleanups and fixes for nfit_test (nvdimm unit tests)"
* tag 'libnvdimm-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
pmem: implement pmem_recovery_write()
pmem: refactor pmem_clear_poison()
dax: add .recovery_write dax_operation
dax: introduce DAX_RECOVERY_WRITE dax access mode
mce: fix set_mce_nospec to always unmap the whole page
x86/mce: relocate set{clear}_mce_nospec() functions
acpi/nfit: rely on mce->misc to determine poison granularity
testing: nvdimm: asm/mce.h is not needed in nfit.c
testing: nvdimm: iomap: make __nfit_test_ioremap a macro
nvdimm: Allow overwrite in the presence of disabled dimms
tools/testing/nvdimm: remove unneeded flush_workqueue
|
|
The function kzalloc() in detached_dev_do_request() can fail, so its
return value should be checked.
Fixes: bc082a55d25c ("bcache: fix inaccurate io state for detached bcache devices")
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Coly Li <colyli@suse.de>
Link: https://lore.kernel.org/r/20220527152818.27545-4-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
bch_sectors_dirty_init()
The local variables check_state (in bch_btree_check()) and state (in
bch_sectors_dirty_init()) should be fully filled by 0, because before
allocating them on stack, they were dynamically allocated by kzalloc().
Signed-off-by: Coly Li <colyli@suse.de>
Link: https://lore.kernel.org/r/20220527152818.27545-2-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mike Snitzer:
- Enable DM core bioset's per-cpu bio cache if QUEUE_FLAG_POLL set.
This change improves DM's hipri bio polling (REQ_POLLED) performance
by 7 - 20% depending on the system.
- Update DM core to use jump_labels to further reduce cost of unlikely
branches for zoned block devices, dm-stats and swap_bios throttling.
- Various DM core changes to reduce bio-based DM overhead and simplify
IO accounting.
- Fundamental DM core improvements to dm_io reference counting and the
elimination of using bio_split()+bio_chain() -- instead DM's
bio-based IO accounting is updated to account that a split occurred.
- Improve DM core's abnormal bio processing to do less work.
- Improve DM core's hipri polling support to use a single list rather
than an hlist.
- Update DM core to pass NULL bdev to bio_alloc_clone() so that
initialization that isn't useful for DM can be elided.
- Add cond_resched to DM stats' various loops that loop over all
entries.
- Fix incorrect error code return from DM integrity's constructor.
- Make DM crypt's printing of the key constant-time.
- Update bio-based DM multipath to provide high-resolution timer to the
Historical Service Time (HST) path selector.
* tag 'for-5.19/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (26 commits)
dm: pass NULL bdev to bio_alloc_clone
dm cache metadata: remove unnecessary variable in __dump_mapping
dm mpath: provide high-resolution timer to HST for bio-based
dm crypt: make printing of the key constant-time
dm integrity: fix error code in dm_integrity_ctr()
dm stats: add cond_resched when looping over entries
dm: improve abnormal bio processing
dm: simplify bio-based IO accounting further
dm: put all polled dm_io instances into a single list
dm: improve dm_io reference counting
dm: don't grab target io reference in dm_zone_map_bio
dm: improve bio splitting and associated IO accounting
dm: switch to bdev based IO accounting interfaces
dm: pass dm_io instance to dm_io_acct directly
dm: don't pass bio to __dm_start_io_acct and dm_end_io_acct
dm: use bio_sectors in dm_aceept_partial_bio
dm: simplify basic targets
dm: conditionally enable branching for less used features
dm: introduce dm_{get,put}_live_table_bio called from dm_submit_bio
dm: move hot dm_io members to same cacheline as dm_target_io
...
|
|
The journal no-space deadlock was reported time to time. Such deadlock
can happen in the following situation.
When all journal buckets are fully filled by active jset with heavy
write I/O load, the cache set registration (after a reboot) will load
all active jsets and inserting them into the btree again (which is
called journal replay). If a journaled bkey is inserted into a btree
node and results btree node split, new journal request might be
triggered. For example, the btree grows one more level after the node
split, then the root node record in cache device super block will be
upgrade by bch_journal_meta() from bch_btree_set_root(). But there is no
space in journal buckets, the journal replay has to wait for new journal
bucket to be reclaimed after at least one journal bucket replayed. This
is one example that how the journal no-space deadlock happens.
The solution to avoid the deadlock is to reserve 1 journal bucket in
run time, and only permit the reserved journal bucket to be used during
cache set registration procedure for things like journal replay. Then
the journal space will never be fully filled, there is no chance for
journal no-space deadlock to happen anymore.
This patch adds a new member "bool do_reserve" in struct journal, it is
inititalized to 0 (false) when struct journal is allocated, and set to
1 (true) by bch_journal_space_reserve() when all initialization done in
run_cache_set(). In the run time when journal_reclaim() tries to
allocate a new journal bucket, free_journal_buckets() is called to check
whether there are enough free journal buckets to use. If there is only
1 free journal bucket and journal->do_reserve is 1 (true), the last
bucket is reserved and free_journal_buckets() will return 0 to indicate
no free journal bucket. Then journal_reclaim() will give up, and try
next time to see whetheer there is free journal bucket to allocate. By
this method, there is always 1 jouranl bucket reserved in run time.
During the cache set registration, journal->do_reserve is 0 (false), so
the reserved journal bucket can be used to avoid the no-space deadlock.
Reported-by: Nikhil Kshirsagar <nkshirsagar@gmail.com>
Signed-off-by: Coly Li <colyli@suse.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220524102336.10684-5-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
After making bch_sectors_dirty_init() being multithreaded, the existing
incremental dirty sector counting in bch_root_node_dirty_init() doesn't
release btree occupation after iterating 500000 (INIT_KEYS_EACH_TIME)
bkeys. Because a read lock is added on btree root node to prevent the
btree to be split during the dirty sectors counting, other I/O requester
has no chance to gain the write lock even restart bcache_btree().
That is to say, the incremental dirty sectors counting is incompatible
to the multhreaded bch_sectors_dirty_init(). We have to choose one and
drop another one.
In my testing, with 512 bytes random writes, I generate 1.2T dirty data
and a btree with 400K nodes. With single thread and incremental dirty
sectors counting, it takes 30+ minites to register the backing device.
And with multithreaded dirty sectors counting, the backing device
registration can be accomplished within 2 minutes.
The 30+ minutes V.S. 2- minutes difference makes me decide to keep
multithreaded bch_sectors_dirty_init() and drop the incremental dirty
sectors counting. This is what this patch does.
But INIT_KEYS_EACH_TIME is kept, in sectors_dirty_init_fn() the CPU
will be released by cond_resched() after every INIT_KEYS_EACH_TIME keys
iterated. This is to avoid the watchdog reports a bogus soft lockup
warning.
Fixes: b144e45fc576 ("bcache: make bch_sectors_dirty_init() to be multithreaded")
Signed-off-by: Coly Li <colyli@suse.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220524102336.10684-4-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Commit b144e45fc576 ("bcache: make bch_sectors_dirty_init() to be
multithreaded") makes bch_sectors_dirty_init() to be much faster
when counting dirty sectors by iterating all dirty keys in the btree.
But it isn't in ideal shape yet, still can be improved.
This patch does the following changes to improve current parallel dirty
keys iteration on the btree,
- Add read lock to root node when multiple threads iterating the btree,
to prevent the root node gets split by I/Os from other registered
bcache devices.
- Remove local variable "char name[32]" and generate kernel thread name
string directly when calling kthread_run().
- Allocate "struct bch_dirty_init_state state" directly on stack and
avoid the unnecessary dynamic memory allocation for it.
- Decrease BCH_DIRTY_INIT_THRD_MAX from 64 to 12 which is enough indeed.
- Increase &state->started to count created kernel thread after it
succeeds to create.
- When wait for all dirty key counting threads to finish, use
wait_event() to replace wait_event_interruptible().
With the above changes, the code is more clear, and some potential error
conditions are avoided.
Fixes: b144e45fc576 ("bcache: make bch_sectors_dirty_init() to be multithreaded")
Signed-off-by: Coly Li <colyli@suse.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220524102336.10684-3-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Commit 8e7102273f59 ("bcache: make bch_btree_check() to be
multithreaded") makes bch_btree_check() to be much faster when checking
all btree nodes during cache device registration. But it isn't in ideal
shap yet, still can be improved.
This patch does the following thing to improve current parallel btree
nodes check by multiple threads in bch_btree_check(),
- Add read lock to root node while checking all the btree nodes with
multiple threads. Although currently it is not mandatory but it is
good to have a read lock in code logic.
- Remove local variable 'char name[32]', and generate kernel thread name
string directly when calling kthread_run().
- Allocate local variable "struct btree_check_state check_state" on the
stack and avoid unnecessary dynamic memory allocation for it.
- Reduce BCH_BTR_CHKTHREAD_MAX from 64 to 12 which is enough indeed.
- Increase check_state->started to count created kernel thread after it
succeeds to create.
- When wait for all checking kernel threads to finish, use wait_event()
to replace wait_event_interruptible().
With this change, the code is more clear, and some potential error
conditions are avoided.
Fixes: 8e7102273f59 ("bcache: make bch_btree_check() to be multithreaded")
Signed-off-by: Coly Li <colyli@suse.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220524102336.10684-2-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull block driver updates from Jens Axboe:
"Here are the driver updates queued up for 5.19. This contains:
- NVMe pull requests via Christoph:
- tighten the PCI presence check (Stefan Roese)
- fix a potential NULL pointer dereference in an error path (Kyle
Miller Smith)
- fix interpretation of the DMRSL field (Tom Yan)
- relax the data transfer alignment (Keith Busch)
- verbose error logging improvements (Max Gurtovoy, Chaitanya
Kulkarni)
- misc cleanups (Chaitanya Kulkarni, Christoph)
- set non-mdts limits in nvme_scan_work (Chaitanya Kulkarni)
- add support for TP4084 - Time-to-Ready Enhancements (Christoph)
- MD pull request via Song:
- Improve annotation in raid5 code, by Logan Gunthorpe
- Support MD_BROKEN flag in raid-1/5/10, by Mariusz Tkaczyk
- Other small fixes/cleanups
- null_blk series making the configfs side much saner (Damien)
- Various minor drbd cleanups and fixes (Haowen, Uladzislau, Jiapeng,
Arnd, Cai)
- Avoid using the system workqueue (and hence flushing it) in rnbd
(Jack)
- Avoid using the system workqueue (and hence flushing it) in aoe
(Tetsuo)
- Series fixing discard_alignment issues in drivers (Christoph)
- Small series fixing drivers poking at disk->part0 for openers
information (Christoph)
- Series fixing deadlocks in loop (Christoph, Tetsuo)
- Remove loop.h and add SPDX headers (Christoph)
- Various fixes and cleanups (Julia, Xie, Yu)"
* tag 'for-5.19/drivers-2022-05-22' of git://git.kernel.dk/linux-block: (72 commits)
mtip32xx: fix typo in comment
nvme: set non-mdts limits in nvme_scan_work
nvme: add support for TP4084 - Time-to-Ready Enhancements
nvme: split the enum used for various register constants
nbd: Fix hung on disconnect request if socket is closed before
nvme-fabrics: add a request timeout helper
nvme-pci: harden drive presence detect in nvme_dev_disable()
nvme-pci: fix a NULL pointer dereference in nvme_alloc_admin_tags
nvme: mark internal passthru request RQF_QUIET
nvme: remove unneeded include from constants file
nvme: add missing status values to verbose logging
nvme: set dma alignment to dword
nvme: fix interpretation of DMRSL
loop: remove most the top-of-file boilerplate comment from the UAPI header
loop: remove most the top-of-file boilerplate comment
loop: add a SPDX header
loop: remove loop.h
block: null_blk: Improve device creation with configfs
block: null_blk: Cleanup messages
block: null_blk: Cleanup device creation and deletion
...
|
|
Pull block updates from Jens Axboe:
"Here are the core block changes for 5.19. This contains:
- blk-throttle accounting fix (Laibin)
- Series removing redundant assignments (Michal)
- Expose bio cache via the bio_set, so that DM can use it (Mike)
- Finish off the bio allocation interface cleanups by dealing with
the weirdest member of the family. bio_kmalloc combines a kmalloc
for the bio and bio_vecs with a hidden bio_init call and magic
cleanup semantics (Christoph)
- Clean up the block layer API so that APIs consumed by file systems
are (almost) only struct block_device based, so that file systems
don't have to poke into block layer internals like the
request_queue (Christoph)
- Clean up the blk_execute_rq* API (Christoph)
- Clean up various lose end in the blk-cgroup code to make it easier
to follow in preparation of reworking the blkcg assignment for bios
(Christoph)
- Fix use-after-free issues in BFQ when processes with merged queues
get moved to different cgroups (Jan)
- BFQ fixes (Jan)
- Various fixes and cleanups (Bart, Chengming, Fanjun, Julia, Ming,
Wolfgang, me)"
* tag 'for-5.19/block-2022-05-22' of git://git.kernel.dk/linux-block: (83 commits)
blk-mq: fix typo in comment
bfq: Remove bfq_requeue_request_body()
bfq: Remove superfluous conversion from RQ_BIC()
bfq: Allow current waker to defend against a tentative one
bfq: Relax waker detection for shared queues
blk-cgroup: delete rcu_read_lock_held() WARN_ON_ONCE()
blk-throttle: Set BIO_THROTTLED when bio has been throttled
blk-cgroup: Remove unnecessary rcu_read_lock/unlock()
blk-cgroup: always terminate io.stat lines
block, bfq: make bfq_has_work() more accurate
block, bfq: protect 'bfqd->queued' by 'bfqd->lock'
block: cleanup the VM accounting in submit_bio
block: Fix the bio.bi_opf comment
block: reorder the REQ_ flags
blk-iocost: combine local_stat and desc_stat to stat
block: improve the error message from bio_check_eod
block: allow passing a NULL bdev to bio_alloc_clone/bio_init_clone
block: remove superfluous calls to blkcg_bio_issue_init
kthread: unexport kthread_blkcg
blk-cgroup: cleanup blkcg_maybe_throttle_current
...
|
|
Now io_acct_set is alloc and free in personality. Remove the codes that
free io_acct_set in md_free and md_stop.
Fixes: 0c031fd37f69 (md: Move alloc/free acct bioset in to personality)
Signed-off-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Song Liu <song@kernel.org>
|
|
In normal stop process, it does like this:
do_md_stop
|
__md_stop (pers->free(); mddev->private=NULL)
|
md_free (free mddev)
__md_stop sets mddev->private to NULL after pers->free. The raid device
will be stopped and mddev memory is free. But in reshape, it doesn't
free the mddev and mddev will still be used in new raid.
In reshape, it first sets mddev->private to new_pers and then runs
old_pers->free(). Now raid0 sets mddev->private to NULL in raid0_free.
The new raid can't work anymore. It will panic when dereference
mddev->private because of NULL pointer dereference.
It can panic like this:
[63010.814972] kernel BUG at drivers/md/raid10.c:928!
[63010.819778] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
[63010.825011] CPU: 3 PID: 44437 Comm: md0_resync Kdump: loaded Not tainted 5.14.0-86.el9.x86_64 #1
[63010.833789] Hardware name: Dell Inc. PowerEdge R6415/07YXFK, BIOS 1.15.0 09/11/2020
[63010.841440] RIP: 0010:raise_barrier+0x161/0x170 [raid10]
[63010.865508] RSP: 0018:ffffc312408bbc10 EFLAGS: 00010246
[63010.870734] RAX: 0000000000000000 RBX: ffffa00bf7d39800 RCX: 0000000000000000
[63010.877866] RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffffa00bf7d39800
[63010.884999] RBP: 0000000000000000 R08: fffffa4945e74400 R09: 0000000000000000
[63010.892132] R10: ffffa00eed02f798 R11: 0000000000000000 R12: ffffa00bbc435200
[63010.899266] R13: ffffa00bf7d39800 R14: 0000000000000400 R15: 0000000000000003
[63010.906399] FS: 0000000000000000(0000) GS:ffffa00eed000000(0000) knlGS:0000000000000000
[63010.914485] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[63010.920229] CR2: 00007f5cfbe99828 CR3: 0000000105efe000 CR4: 00000000003506e0
[63010.927363] Call Trace:
[63010.929822] ? bio_reset+0xe/0x40
[63010.933144] ? raid10_alloc_init_r10buf+0x60/0xa0 [raid10]
[63010.938629] raid10_sync_request+0x756/0x1610 [raid10]
[63010.943770] md_do_sync.cold+0x3e4/0x94c
[63010.947698] md_thread+0xab/0x160
[63010.951024] ? md_write_inc+0x50/0x50
[63010.954688] kthread+0x149/0x170
[63010.957923] ? set_kthread_struct+0x40/0x40
[63010.962107] ret_from_fork+0x22/0x30
Removing the code that sets mddev->private to NULL in raid0 can fix
problem.
Fixes: 0c031fd37f69 (md: Move alloc/free acct bioset in to personality)
Reported-by: Fine Fan <ffan@redhat.com>
Signed-off-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Song Liu <song@kernel.org>
|
