summaryrefslogtreecommitdiff
path: root/drivers/md
AgeCommit message (Collapse)AuthorFilesLines
2017-05-25md: MD_CLOSING needs to be cleared after called md_set_readonly or do_md_stopNeilBrown1-0/+5
commit 065e519e71b2c1f41936cce75b46b5ab34adb588 upstream. if called md_set_readonly and set MD_CLOSING bit, the mddev cannot be opened any more due to the MD_CLOING bit wasn't cleared. Thus it needs to be cleared in md_ioctl after any call to md_set_readonly() or do_md_stop(). Signed-off-by: NeilBrown <neilb@suse.com> Fixes: af8d8e6f0315 ("md: changes for MD_STILL_CLOSED flag") Signed-off-by: Zhilong Liu <zlliu@suse.com> Signed-off-by: Shaohua Li <shli@fb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-25md: update slab_cache before releasing new stripes when stripes resizingDennis Yang1-2/+4
commit 583da48e388f472e8818d9bb60ef6a1d40ee9f9d upstream. When growing raid5 device on machine with small memory, there is chance that mdadm will be killed and the following bug report can be observed. The same bug could also be reproduced in linux-4.10.6. [57600.075774] BUG: unable to handle kernel NULL pointer dereference at (null) [57600.083796] IP: [<ffffffff81a6aa87>] _raw_spin_lock+0x7/0x20 [57600.110378] PGD 421cf067 PUD 4442d067 PMD 0 [57600.114678] Oops: 0002 [#1] SMP [57600.180799] CPU: 1 PID: 25990 Comm: mdadm Tainted: P O 4.2.8 #1 [57600.187849] Hardware name: To be filled by O.E.M. To be filled by O.E.M./MAHOBAY, BIOS QV05AR66 03/06/2013 [57600.197490] task: ffff880044e47240 ti: ffff880043070000 task.ti: ffff880043070000 [57600.204963] RIP: 0010:[<ffffffff81a6aa87>] [<ffffffff81a6aa87>] _raw_spin_lock+0x7/0x20 [57600.213057] RSP: 0018:ffff880043073810 EFLAGS: 00010046 [57600.218359] RAX: 0000000000000000 RBX: 000000000000000c RCX: ffff88011e296dd0 [57600.225486] RDX: 0000000000000001 RSI: ffffe8ffffcb46c0 RDI: 0000000000000000 [57600.232613] RBP: ffff880043073878 R08: ffff88011e5f8170 R09: 0000000000000282 [57600.239739] R10: 0000000000000005 R11: 28f5c28f5c28f5c3 R12: ffff880043073838 [57600.246872] R13: ffffe8ffffcb46c0 R14: 0000000000000000 R15: ffff8800b9706a00 [57600.253999] FS: 00007f576106c700(0000) GS:ffff88011e280000(0000) knlGS:0000000000000000 [57600.262078] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [57600.267817] CR2: 0000000000000000 CR3: 00000000428fe000 CR4: 00000000001406e0 [57600.274942] Stack: [57600.276949] ffffffff8114ee35 ffff880043073868 0000000000000282 000000000000eb3f [57600.284383] ffffffff81119043 ffff880043073838 ffff880043073838 ffff88003e197b98 [57600.291820] ffffe8ffffcb46c0 ffff88003e197360 0000000000000286 ffff880043073968 [57600.299254] Call Trace: [57600.301698] [<ffffffff8114ee35>] ? cache_flusharray+0x35/0xe0 [57600.307523] [<ffffffff81119043>] ? __page_cache_release+0x23/0x110 [57600.313779] [<ffffffff8114eb53>] kmem_cache_free+0x63/0xc0 [57600.319344] [<ffffffff81579942>] drop_one_stripe+0x62/0x90 [57600.324915] [<ffffffff81579b5b>] raid5_cache_scan+0x8b/0xb0 [57600.330563] [<ffffffff8111b98a>] shrink_slab.part.36+0x19a/0x250 [57600.336650] [<ffffffff8111e38c>] shrink_zone+0x23c/0x250 [57600.342039] [<ffffffff8111e4f3>] do_try_to_free_pages+0x153/0x420 [57600.348210] [<ffffffff8111e851>] try_to_free_pages+0x91/0xa0 [57600.353959] [<ffffffff811145b1>] __alloc_pages_nodemask+0x4d1/0x8b0 [57600.360303] [<ffffffff8157a30b>] check_reshape+0x62b/0x770 [57600.365866] [<ffffffff8157a4a5>] raid5_check_reshape+0x55/0xa0 [57600.371778] [<ffffffff81583df7>] update_raid_disks+0xc7/0x110 [57600.377604] [<ffffffff81592b73>] md_ioctl+0xd83/0x1b10 [57600.382827] [<ffffffff81385380>] blkdev_ioctl+0x170/0x690 [57600.388307] [<ffffffff81195238>] block_ioctl+0x38/0x40 [57600.393525] [<ffffffff811731c5>] do_vfs_ioctl+0x2b5/0x480 [57600.399010] [<ffffffff8115e07b>] ? vfs_write+0x14b/0x1f0 [57600.404400] [<ffffffff811733cc>] SyS_ioctl+0x3c/0x70 [57600.409447] [<ffffffff81a6ad97>] entry_SYSCALL_64_fastpath+0x12/0x6a [57600.415875] Code: 00 00 00 00 55 48 89 e5 8b 07 85 c0 74 04 31 c0 5d c3 ba 01 00 00 00 f0 0f b1 17 85 c0 75 ef b0 01 5d c3 90 31 c0 ba 01 00 00 00 <f0> 0f b1 17 85 c0 75 01 c3 55 89 c6 48 89 e5 e8 85 d1 63 ff 5d [57600.435460] RIP [<ffffffff81a6aa87>] _raw_spin_lock+0x7/0x20 [57600.441208] RSP <ffff880043073810> [57600.444690] CR2: 0000000000000000 [57600.448000] ---[ end trace cbc6b5cc4bf9831d ]--- The problem is that resize_stripes() releases new stripe_heads before assigning new slab cache to conf->slab_cache. If the shrinker function raid5_cache_scan() gets called after resize_stripes() starting releasing new stripes but right before new slab cache being assigned, it is possible that these new stripe_heads will be freed with the old slab_cache which was already been destoryed and that triggers this bug. Signed-off-by: Dennis Yang <dennisyang@qnap.com> Fixes: edbe83ab4c27 ("md/raid5: allow the stripe_cache to grow and shrink.") Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-25dm space map disk: fix some book keeping in the disk space mapJoe Thornber1-1/+14
commit 0377a07c7a035e0d033cd8b29f0cb15244c0916a upstream. When decrementing the reference count for a block, the free count wasn't being updated if the reference count went to zero. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-25dm thin metadata: call precommit before saving the rootsJoe Thornber1-2/+2
commit 91bcdb92d39711d1adb40c26b653b7978d93eb98 upstream. These calls were the wrong way round in __write_initial_superblock. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-25dm bufio: make the parameter "retain_bytes" unsigned longMikulas Patocka1-8/+8
commit 13840d38016203f0095cd547b90352812d24b787 upstream. Change the type of the parameter "retain_bytes" from unsigned to unsigned long, so that on 64-bit machines the user can set more than 4GiB of data to be retained. Also, change the type of the variable "count" in the function "__evict_old_buffers" to unsigned long. The assignment "count = c->n_buffers[LIST_CLEAN] + c->n_buffers[LIST_DIRTY];" could result in unsigned long to unsigned overflow and that could result in buffers not being freed when they should. While at it, avoid division in get_retain_buffers(). Division is slow, we can change it to shift because we have precalculated the log2 of block size. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-25dm cache metadata: fail operations if fail_io mode has been establishedMike Snitzer1-4/+8
commit 10add84e276432d9dd8044679a1028dd4084117e upstream. Otherwise it is possible to trigger crashes due to the metadata being inaccessible yet these methods don't safely account for that possibility without these checks. Reported-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-25dm mpath: delay requeuing while path initialization is in progressBart Van Assche1-3/+7
commit c1d7ecf7ca11d0edd3085262c8597203440d056c upstream. Requeuing a request immediately while path initialization is ongoing causes high CPU usage, something that is undesired. Hence delay requeuing while path initialization is in progress. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-25dm mpath: avoid that path removal can trigger an infinite loopBart Van Assche1-4/+11
commit 7083abbbfc4fa706ff72d27d33a5214881979336 upstream. If blk_get_request() fails, check whether the failure is due to a path being removed. If that is the case, fail the path by triggering a call to fail_path(). This avoids that the following scenario can be encountered while removing paths: * CPU usage of a kworker thread jumps to 100%. * Removing the DM device becomes impossible. Delay requeueing if blk_get_request() returns -EBUSY or -EWOULDBLOCK, and the queue is not dying, because in these cases immediate requeuing is inappropriate. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Hannes Reinecke <hare@suse.com> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-25dm mpath: split and rename activate_path() to prepare for its expanded useBart Van Assche1-5/+12
commit 89bfce763e43fa4897e0d3af6b29ed909df64cfd upstream. activate_path() is renamed to activate_path_work() which now calls activate_or_offline_path(). activate_or_offline_path() will be used by the next commit. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Hannes Reinecke <hare@suse.com> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-25dm mpath: requeue after a small delay if blk_get_request() failsBart Van Assche2-4/+3
commit 06eb061f48594aa369f6e852b352410298b317a8 upstream. If blk_get_request() returns ENODEV then multipath_clone_and_map() causes a request to be requeued immediately. This can cause a kworker thread to spend 100% of the CPU time of a single core in __blk_mq_run_hw_queue() and also can cause device removal to never finish. Avoid this by only requeuing after a delay if blk_get_request() fails. Additionally, reduce the requeue delay. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-25dm bufio: check new buffer allocation watermark every 30 secondsMikulas Patocka1-0/+10
commit 390020ad2af9ca04844c4f3b1f299ad8746d84c8 upstream. dm-bufio checks a watermark when it allocates a new buffer in __bufio_new(). However, it doesn't check the watermark when the user changes /sys/module/dm_bufio/parameters/max_cache_size_bytes. This may result in a problem - if the watermark is high enough so that all possible buffers are allocated and if the user lowers the value of "max_cache_size_bytes", the watermark will never be checked against the new value because no new buffer would be allocated. To fix this, change __evict_old_buffers() so that it checks the watermark. __evict_old_buffers() is called every 30 seconds, so if the user reduces "max_cache_size_bytes", dm-bufio will react to this change within 30 seconds and decrease memory consumption. Depends-on: 1b0fb5a5b2 ("dm bufio: avoid a possible ABBA deadlock") Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-25dm bufio: avoid a possible ABBA deadlockMikulas Patocka1-4/+5
commit 1b0fb5a5b2dc0dddcfa575060441a7176ba7ac37 upstream. __get_memory_limit() tests if dm_bufio_cache_size changed and calls __cache_size_refresh() if it did. It takes dm_bufio_clients_lock while it already holds the client lock. However, lock ordering is violated because in cleanup_old_buffers() dm_bufio_clients_lock is taken before the client lock. This results in a possible deadlock and lockdep engine warning. Fix this deadlock by changing mutex_lock() to mutex_trylock(). If the lock can't be taken, it will be re-checked next time when a new buffer is allocated. Also add "unlikely" to the if condition, so that the optimizer assumes that the condition is false. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-25dm raid: select the Kconfig option CONFIG_MD_RAID0Mikulas Patocka1-0/+1
commit 7b81ef8b14f80033e4a4168d199a0f5fd79b9426 upstream. Since the commit 0cf4503174c1 ("dm raid: add support for the MD RAID0 personality"), the dm-raid subsystem can activate a RAID-0 array. Therefore, add MD_RAID0 to the dependencies of DM_RAID, so that MD_RAID0 will be selected when DM_RAID is selected. Fixes: 0cf4503174c1 ("dm raid: add support for the MD RAID0 personality") Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-25dm btree: fix for dm_btree_find_lowest_key()Vinothkumar Raja1-2/+6
commit 7d1fedb6e96a960aa91e4ff70714c3fb09195a5a upstream. dm_btree_find_lowest_key() is giving incorrect results. find_key() traverses the btree correctly for finding the highest key, but there is an error in the way it traverses the btree for retrieving the lowest key. dm_btree_find_lowest_key() fetches the first key of the rightmost block of the btree instead of fetching the first key from the leftmost block. Fix this by conditionally passing the correct parameter to value64() based on the @find_highest flag. Signed-off-by: Erez Zadok <ezk@fsl.cs.sunysb.edu> Signed-off-by: Vinothkumar Raja <vinraja@cs.stonybrook.edu> Signed-off-by: Nidhi Panpalia <npanpalia@cs.stonybrook.edu> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-20md/raid1: avoid reusing a resync bio after error handling.NeilBrown1-0/+2
commit 0c9d5b127f695818c2c5a3868c1f28ca2969e905 upstream. fix_sync_read_error() modifies a bio on a newly faulty device by setting bi_end_io to end_sync_write. This ensure that put_buf() will still call rdev_dec_pending() as required, but makes sure that subsequent code in fix_sync_read_error() doesn't try to read from the device. Unfortunately this interacts badly with sync_request_write() which assumes that any bio with bi_end_io set to non-NULL other than end_sync_read is safe to write to. As the device is now faulty it doesn't make sense to write. As the bio was recently used for a read, it is "dirty" and not suitable for immediate submission. In particular, ->bi_next might be non-NULL, which will cause generic_make_request() to complain. Break this interaction by refusing to write to devices which are marked as Faulty. Reported-and-tested-by: Michael Wang <yun.wang@profitbricks.com> Fixes: 2e52d449bcec ("md/raid1: add failfast handling for reads.") Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-20dm thin: fix a memory leak when passing discard bio downDennis Yang1-0/+1
commit 948f581a53b704b984aa20df009f0a2b4cf7f907 upstream. dm-thin does not free the discard_parent bio after all chained sub bios finished. The following kmemleak report could be observed after pool with discard_passdown option processes discard bios in linux v4.11-rc7. To fix this, we drop the discard_parent bio reference when its endio (passdown_endio) called. unreferenced object 0xffff8803d6b29700 (size 256): comm "kworker/u8:0", pid 30349, jiffies 4379504020 (age 143002.776s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 01 00 00 00 00 00 00 f0 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff81a5efd9>] kmemleak_alloc+0x49/0xa0 [<ffffffff8114ec34>] kmem_cache_alloc+0xb4/0x100 [<ffffffff8110eec0>] mempool_alloc_slab+0x10/0x20 [<ffffffff8110efa5>] mempool_alloc+0x55/0x150 [<ffffffff81374939>] bio_alloc_bioset+0xb9/0x260 [<ffffffffa018fd20>] process_prepared_discard_passdown_pt1+0x40/0x1c0 [dm_thin_pool] [<ffffffffa018b409>] break_up_discard_bio+0x1a9/0x200 [dm_thin_pool] [<ffffffffa018b484>] process_discard_cell_passdown+0x24/0x40 [dm_thin_pool] [<ffffffffa018b24d>] process_discard_bio+0xdd/0xf0 [dm_thin_pool] [<ffffffffa018ecf6>] do_worker+0xa76/0xd50 [dm_thin_pool] [<ffffffff81086239>] process_one_work+0x139/0x370 [<ffffffff810867b1>] worker_thread+0x61/0x450 [<ffffffff8108b316>] kthread+0xd6/0xf0 [<ffffffff81a6cd1f>] ret_from_fork+0x3f/0x70 [<ffffffffffffffff>] 0xffffffffffffffff Signed-off-by: Dennis Yang <dennisyang@qnap.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-20dm rq: check blk_mq_register_dev() return value in dm_mq_init_request_queue()Bart Van Assche1-1/+5
commit 23a601248958fa4142d49294352fe8d1fdf3e509 upstream. Otherwise the request-based DM blk-mq request_queue will be put into service without being properly exported via sysfs. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-20dm era: save spacemap metadata root after the pre-commitSomasundaram Krishnasamy1-4/+4
commit 117aceb030307dcd431fdcff87ce988d3016c34a upstream. When committing era metadata to disk, it doesn't always save the latest spacemap metadata root in superblock. Due to this, metadata is getting corrupted sometimes when reopening the device. The correct order of update should be, pre-commit (shadows spacemap root), save the spacemap root (newly shadowed block) to in-core superblock and then the final commit. Signed-off-by: Somasundaram Krishnasamy <somasundaram.krishnasamy@oracle.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-20dm crypt: rewrite (wipe) key in crypto layer using random dataOndrej Kozina1-2/+6
commit c82feeec9a014b72c4ffea36648cfb6f81cc1b73 upstream. The message "key wipe" used to wipe real key stored in crypto layer by rewriting it with zeroes. Since commit 28856a9 ("crypto: xts - consolidate sanity check for keys") this no longer works in FIPS mode for XTS. While running in FIPS mode the crypto key part has to differ from the tweak key. Fixes: 28856a9 ("crypto: xts - consolidate sanity check for keys") Signed-off-by: Ondrej Kozina <okozina@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-14dm ioctl: prevent stack leak in dm ioctl callAdrian Salido1-1/+1
commit 4617f564c06117c7d1b611be49521a4430042287 upstream. When calling a dm ioctl that doesn't process any data (IOCTL_FLAGS_NO_PARAMS), the contents of the data field in struct dm_ioctl are left initialized. Current code is incorrectly extending the size of data copied back to user, causing the contents of kernel stack to be leaked to user. Fix by only copying contents before data and allow the functions processing the ioctl to override. Signed-off-by: Adrian Salido <salidoa@google.com> Reviewed-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-08Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds1-0/+1
Pull block fixes from Jens Axboe: "Here's a pull request for 4.11-rc, fixing a set of issues mostly centered around the new scheduling framework. These have been brewing for a while, but split up into what we absolutely need in 4.11, and what we can defer until 4.12. These are well tested, on both single queue and multiqueue setups, and with and without shared tags. They fix several hangs that have happened in testing. This is obviously larger than I would have preferred at this point in time, but I don't think we can shave much off this and still get the desired results. In detail, this pull request contains: - a set of five fixes for NVMe, mostly from Christoph and one from Roland. - a series from Bart, fixing issues with dm-mq and SCSI shared tags and scheduling. Note that one of those patches commit messages may read like an optimization, but it is in fact an important fix for queue restarts in particular. - a series from Omar, most importantly fixing a hang with multiple hardware queues when we fail to get a driver tag. Another important fix in there is for resizing hardware queues, which nbd does when handling multiple sockets for one connection. - fixing an imbalance in putting the ctx for hctx request allocations from Minchan" * 'for-linus' of git://git.kernel.dk/linux-block: blk-mq: Restart a single queue if tag sets are shared dm rq: Avoid that request processing stalls sporadically scsi: Avoid that SCSI queues get stuck blk-mq: Introduce blk_mq_delay_run_hw_queue() blk-mq: remap queues when adding/removing hardware queues blk-mq-sched: fix crash in switch error path blk-mq-sched: set up scheduler tags when bringing up new queues blk-mq-sched: refactor scheduler initialization blk-mq: use the right hctx when getting a driver tag fails nvmet: fix byte swap in nvmet_parse_io_cmd nvmet: fix byte swap in nvmet_execute_write_zeroes nvmet: add missing byte swap in nvmet_get_smart_log nvme: add missing byte swap in nvme_setup_discard nvme: Correct NVMF enum values to match NVMe-oF rev 1.0 block: do not put mq context in blk_mq_alloc_request_hctx
2017-04-07dm rq: Avoid that request processing stalls sporadicallyBart Van Assche1-0/+1
While running the srp-test software I noticed that request processing stalls sporadically at the beginning of a test, namely when mkfs is run against a dm-mpath device. Every time when that happened the following command was sufficient to resume request processing: echo run >/sys/kernel/debug/block/dm-0/state This patch avoids that such request processing stalls occur. The test I ran is as follows: while srp-test/run_tests -d -r 30 -t 02-mq; do :; done Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Mike Snitzer <snitzer@redhat.com> Cc: dm-devel@redhat.com Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-07Merge tag 'dm-4.11-fixes-2' of ↵Linus Torvalds4-8/+24
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fixes from Mike Snitzer: - two stable fixes for the verity target's FEC support - a stable fix for raid target's raid1 support (when no bitmap is used) - a 4.11 cache metadata v2 format fix to properly test blocks are clean * tag 'dm-4.11-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm verity fec: fix bufio leaks dm raid: fix NULL pointer dereference for raid1 without bitmap dm cache metadata: fix metadata2 format's blocks_are_clean_separate_dirty dm verity fec: limit error correction recursion
2017-03-31dm verity fec: fix bufio leaksSami Tolvanen1-3/+3
Buffers read through dm_bufio_read() were not released in all code paths. Fixes: a739ff3f543a ("dm verity: add support for forward error correction") Cc: stable@vger.kernel.org # v4.5+ Signed-off-by: Sami Tolvanen <samitolvanen@google.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-03-31dm raid: fix NULL pointer dereference for raid1 without bitmapDmitry Bilunov1-1/+1
Commit 4257e08 ("dm raid: support to change bitmap region size") introduced a bitmap resize call during preresume phase. User can create a DM device with "raid" target configured as raid1 with no metadata devices to hold superblock/bitmap info. It can be achieved using the following sequence: truncate -s 32M /dev/shm/raid-test LOOP=$(losetup --show -f /dev/shm/raid-test) dmsetup create raid-test-linear0 --table "0 1024 linear $LOOP 0" dmsetup create raid-test-linear1 --table "0 1024 linear $LOOP 1024" dmsetup create raid-test --table "0 1024 raid raid1 1 2048 2 - /dev/mapper/raid-test-linear0 - /dev/mapper/raid-test-linear1" This results in the following crash: [ 4029.110216] device-mapper: raid: Ignoring chunk size parameter for RAID 1 [ 4029.110217] device-mapper: raid: Choosing default region size of 4MiB [ 4029.111349] md/raid1:mdX: active with 2 out of 2 mirrors [ 4029.114770] BUG: unable to handle kernel NULL pointer dereference at 0000000000000030 [ 4029.114802] IP: bitmap_resize+0x25/0x7c0 [md_mod] [ 4029.114816] PGD 0 … [ 4029.115059] Hardware name: Aquarius Pro P30 S85 BUY-866/B85M-E, BIOS 2304 05/25/2015 [ 4029.115079] task: ffff88015cc29a80 task.stack: ffffc90001a5c000 [ 4029.115097] RIP: 0010:bitmap_resize+0x25/0x7c0 [md_mod] [ 4029.115112] RSP: 0018:ffffc90001a5fb68 EFLAGS: 00010246 [ 4029.115127] RAX: 0000000000000005 RBX: 0000000000000000 RCX: 0000000000000000 [ 4029.115146] RDX: 0000000000000000 RSI: 0000000000000400 RDI: 0000000000000000 [ 4029.115166] RBP: ffffc90001a5fc28 R08: 0000000800000000 R09: 00000008ffffffff [ 4029.115185] R10: ffffea0005661600 R11: ffff88015cc29a80 R12: ffff88021231f058 [ 4029.115204] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 [ 4029.115223] FS: 00007fe73a6b4740(0000) GS:ffff88021ea80000(0000) knlGS:0000000000000000 [ 4029.115245] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 4029.115261] CR2: 0000000000000030 CR3: 0000000159a74000 CR4: 00000000001426e0 [ 4029.115281] Call Trace: [ 4029.115291] ? raid_iterate_devices+0x63/0x80 [dm_raid] [ 4029.115309] ? dm_table_all_devices_attribute.isra.23+0x41/0x70 [dm_mod] [ 4029.115329] ? dm_table_set_restrictions+0x225/0x2d0 [dm_mod] [ 4029.115346] raid_preresume+0x81/0x2e0 [dm_raid] [ 4029.115361] dm_table_resume_targets+0x47/0xe0 [dm_mod] [ 4029.115378] dm_resume+0xa8/0xd0 [dm_mod] [ 4029.115391] dev_suspend+0x123/0x250 [dm_mod] [ 4029.115405] ? table_load+0x350/0x350 [dm_mod] [ 4029.115419] ctl_ioctl+0x1c2/0x490 [dm_mod] [ 4029.115433] dm_ctl_ioctl+0xe/0x20 [dm_mod] [ 4029.115447] do_vfs_ioctl+0x8d/0x5a0 [ 4029.115459] ? ____fput+0x9/0x10 [ 4029.115470] ? task_work_run+0x79/0xa0 [ 4029.115481] SyS_ioctl+0x3c/0x70 [ 4029.115493] entry_SYSCALL_64_fastpath+0x13/0x94 The raid_preresume() function incorrectly assumes that the raid_set has a bitmap enabled if RT_FLAG_RS_BITMAP_LOADED is set. But RT_FLAG_RS_BITMAP_LOADED is getting set in __load_dirty_region_bitmap() even if there is no bitmap present (and bitmap_load() happily returns 0 even if a bitmap isn't present). So the only way forward in the near-term is to check if the bitmap is present by seeing if mddev->bitmap is not NULL after bitmap_load() has been called. By doing so the above NULL pointer is avoided. Fixes: 4257e08 ("dm raid: support to change bitmap region size") Cc: stable@vger.kernel.org # v4.8+ Signed-off-by: Dmitry Bilunov <kmeaw@yandex-team.ru> Signed-off-by: Andrey Smetanin <asmetanin@yandex-team.ru> Acked-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-03-20dm cache metadata: fix metadata2 format's blocks_are_clean_separate_dirtyJoe Thornber1-3/+5
The dm_bitset_cursor_begin() call was using the incorrect nr_entries. Also, the last dm_bitset_cursor_next() must be avoided if we're at the end of the cursor. Fixes: 7f1b21591a6 ("dm cache metadata: use cursor api in blocks_are_clean_separate_dirty()") Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-03-16Merge branch 'for-linus' of ↵Linus Torvalds6-38/+72
git://git.kernel.org/pub/scm/linux/kernel/git/shli/md Pull MD fixes from Shaohua Li: - fix a parity calculation bug of raid5 cache by Song - fix a potential deadlock issue by me - fix two endian issues by Jason - fix a disk limitation issue by Neil - other small fixes and cleanup * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md: md/raid1: fix a trivial typo in comments md/r5cache: fix set_syndrome_sources() for data in cache md: fix incorrect use of lexx_to_cpu in does_sb_need_changing md: fix super_offset endianness in super_1_rdev_size_change md/raid1/10: fix potential deadlock md: don't impose the MD_SB_DISKS limit on arrays without metadata. md: move funcs from pers->resize to update_size md-cluster: remove useless memset from gather_all_resync_info md-cluster: free md_cluster_info if node leave cluster md: delete dead code md/raid10: submit bio directly to replacement disk
2017-03-16dm verity fec: limit error correction recursionSami Tolvanen2-1/+15
If the hash tree itself is sufficiently corrupt in addition to data blocks, it's possible for error correction to end up in a deep recursive loop, which eventually causes a kernel panic. This change limits the recursion to a reasonable level during a single I/O operation. Fixes: a739ff3f543a ("dm verity: add support for forward error correction") Signed-off-by: Sami Tolvanen <samitolvanen@google.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org # v4.5+
2017-03-14md/raid1: fix a trivial typo in commentsZhilong Liu1-1/+1
raid1.c: fix a trivial typo in comments of freeze_array(). Cc: Jack Wang <jack.wang.usish@gmail.com> Cc: Guoqing Jiang <gqjiang@suse.com> Cc: John Stoffel <john@stoffel.org> Acked-by: Coly Li <colyli@suse.de> Signed-off-by: Zhilong Liu <zlliu@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-14md/r5cache: fix set_syndrome_sources() for data in cacheSong Liu1-1/+2
Before this patch, device InJournal will be included in prexor (SYNDROME_SRC_WANT_DRAIN) but not in reconstruct (SYNDROME_SRC_WRITTEN). So it will break parity calculation. With srctype == SYNDROME_SRC_WRITTEN, we need include both dev with non-null ->written and dev with R5_InJournal. This fixes logic in 1e6d690(md/r5cache: caching phase of r5cache) Cc: stable@vger.kernel.org (v4.10+) Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-12blk: Ensure users for current->bio_list can see the full list.NeilBrown2-14/+18
Commit 79bd99596b73 ("blk: improve order of bio handling in generic_make_request()") changed current->bio_list so that it did not contain *all* of the queued bios, but only those submitted by the currently running make_request_fn. There are two places which walk the list and requeue selected bios, and others that check if the list is empty. These are no longer correct. So redefine current->bio_list to point to an array of two lists, which contain all queued bios, and adjust various code to test or walk both lists. Signed-off-by: NeilBrown <neilb@suse.com> Fixes: 79bd99596b73 ("blk: improve order of bio handling in generic_make_request()") Signed-off-by: Jens Axboe <axboe@fb.com>
2017-03-10md: fix incorrect use of lexx_to_cpu in does_sb_need_changingJason Yan1-1/+1
The sb->layout is of type __le32, so we shoud use le32_to_cpu. Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-10md: fix super_offset endianness in super_1_rdev_size_changeJason Yan1-1/+1
The sb->super_offset should be big-endian, but the rdev->sb_start is in host byte order, so fix this by adding cpu_to_le64. Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-10drivers/md/bcache/util.h: remove duplicate inclusion of blkdev.hMasanari Iida1-1/+0
Link: http://lkml.kernel.org/r/20170226060230.11555-1-standby24x7@gmail.com Signed-off-by: Masanari Iida <standby24x7@gmail.com> Acked-by: Coly Li <colyli@suse.de> Cc: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-03-09md/raid1/10: fix potential deadlockShaohua Li2-2/+41
Neil Brown pointed out a potential deadlock in raid 10 code with bio_split/chain. The raid1 code could have the same issue, but recent barrier rework makes it less likely to happen. The deadlock happens in below sequence: 1. generic_make_request(bio), this will set current->bio_list 2. raid10_make_request will split bio to bio1 and bio2 3. __make_request(bio1), wait_barrer, add underlayer disk bio to current->bio_list 4. __make_request(bio2), wait_barrer If raise_barrier happens between 3 & 4, since wait_barrier runs at 3, raise_barrier waits for IO completion from 3. And since raise_barrier sets barrier, 4 waits for raise_barrier. But IO from 3 can't be dispatched because raid10_make_request() doesn't finished yet. The solution is to adjust the IO ordering. Quotes from Neil: " It is much safer to: if (need to split) { split = bio_split(bio, ...) bio_chain(...) make_request_fn(split); generic_make_request(bio); } else make_request_fn(mddev, bio); This way we first process the initial section of the bio (in 'split') which will queue some requests to the underlying devices. These requests will be queued in generic_make_request. Then we queue the remainder of the bio, which will be added to the end of the generic_make_request queue. Then we return. generic_make_request() will pop the lower-level device requests off the queue and handle them first. Then it will process the remainder of the original bio once the first section has been fully processed. " Note, this only happens in read path. In write path, the bio is flushed to underlaying disks either by blk flush (from schedule) or offladed to raid1/10d. It's queued in current->bio_list. Cc: Coly Li <colyli@suse.de> Cc: stable@vger.kernel.org (v3.14+, only the raid10 part) Suggested-by: NeilBrown <neilb@suse.com> Reviewed-by: Jack Wang <jinpu.wang@profitbricks.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-09md: don't impose the MD_SB_DISKS limit on arrays without metadata.NeilBrown1-4/+3
These arrays, created with "mdadm --build" don't benefit from a limit. The default will be used, which is '0' and is interpreted as "don't impose a limit". Reported-by: ian_bruce@mail.ru Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-09md: move funcs from pers->resize to update_sizeGuoqing Jiang4-10/+6
raid1_resize and raid5_resize should also check the mddev->queue if run underneath dm-raid. And both set_capacity and revalidate_disk are used in pers->resize such as raid1, raid10 and raid5. So move them from personality file to common code. Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-09md-cluster: remove useless memset from gather_all_resync_infoGuoqing Jiang1-1/+0
This memset is not needed. The lvb is already zeroed because it was recently allocated by lockres_init, which uses kzalloc(), and read_resync_info() doesn't need it to be zero anyway. Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-09md-cluster: free md_cluster_info if node leave clusterGuoqing Jiang1-0/+1
To avoid memory leak, we need to free the cinfo which is allocated when node join cluster. Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-09md: delete dead codeShaohua Li2-14/+0
Nobody is using mddev_check_plugged(), so delete the dead code Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-09md/raid10: submit bio directly to replacement diskShaohua Li1-3/+16
Commit 57c67df(md/raid10: submit IO from originating thread instead of md thread) submits bio directly for normal disks but not for replacement disks. There is no point we shouldn't do this for replacement disks. Cc: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-03-03Merge branch 'WIP.sched-core-for-linus' of ↵Linus Torvalds14-0/+19
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull sched.h split-up from Ingo Molnar: "The point of these changes is to significantly reduce the <linux/sched.h> header footprint, to speed up the kernel build and to have a cleaner header structure. After these changes the new <linux/sched.h>'s typical preprocessed size goes down from a previous ~0.68 MB (~22K lines) to ~0.45 MB (~15K lines), which is around 40% faster to build on typical configs. Not much changed from the last version (-v2) posted three weeks ago: I eliminated quirks, backmerged fixes plus I rebased it to an upstream SHA1 from yesterday that includes most changes queued up in -next plus all sched.h changes that were pending from Andrew. I've re-tested the series both on x86 and on cross-arch defconfigs, and did a bisectability test at a number of random points. I tried to test as many build configurations as possible, but some build breakage is probably still left - but it should be mostly limited to architectures that have no cross-compiler binaries available on kernel.org, and non-default configurations" * 'WIP.sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (146 commits) sched/headers: Clean up <linux/sched.h> sched/headers: Remove #ifdefs from <linux/sched.h> sched/headers: Remove the <linux/topology.h> include from <linux/sched.h> sched/headers, hrtimer: Remove the <linux/wait.h> include from <linux/hrtimer.h> sched/headers, x86/apic: Remove the <linux/pm.h> header inclusion from <asm/apic.h> sched/headers, timers: Remove the <linux/sysctl.h> include from <linux/timer.h> sched/headers: Remove <linux/magic.h> from <linux/sched/task_stack.h> sched/headers: Remove <linux/sched.h> from <linux/sched/init.h> sched/core: Remove unused prefetch_stack() sched/headers: Remove <linux/rculist.h> from <linux/sched.h> sched/headers: Remove the 'init_pid_ns' prototype from <linux/sched.h> sched/headers: Remove <linux/signal.h> from <linux/sched.h> sched/headers: Remove <linux/rwsem.h> from <linux/sched.h> sched/headers: Remove the runqueue_is_locked() prototype sched/headers: Remove <linux/sched.h> from <linux/sched/hotplug.h> sched/headers: Remove <linux/sched.h> from <linux/sched/debug.h> sched/headers: Remove <linux/sched.h> from <linux/sched/nohz.h> sched/headers: Remove <linux/sched.h> from <linux/sched/stat.h> sched/headers: Remove the <linux/gfp.h> include from <linux/sched.h> sched/headers: Remove <linux/rtmutex.h> from <linux/sched.h> ...
2017-03-03Merge tag 'dm-4.11-fixes' of ↵Linus Torvalds1-4/+16
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fixes from Mike Snitzer: - a dm-raid stable@ fix for possible corruption when triggering a raid reshape via lvm2; and an additional small patch ontop to bump version of the dm-raid target outside of the stable@ fix - a dm-raid fix for a 'dm-4.11-changes' regression introduced by a commit that was meant to only cleanup confusing branching. * tag 'dm-4.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm raid: bump the target version dm raid: fix data corruption on reshape request dm raid: fix raid "check" regression due to improper cleanup in raid_message()
2017-03-02sched/headers: Prepare to move the get_task_struct()/put_task_struct() and ↵Ingo Molnar1-0/+1
related APIs from <linux/sched.h> to <linux/sched/task.h> But first update usage sites with the new header dependency. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02sched/headers: Prepare to use <linux/rcuupdate.h> instead of ↵Ingo Molnar1-0/+2
<linux/rculist.h> in <linux/sched.h> We don't actually need the full rculist.h header in sched.h anymore, we will be able to include the smaller rcupdate.h header instead. But first update code that relied on the implicit header inclusion. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02sched/headers: Prepare for new header dependencies before moving code to ↵Ingo Molnar1-0/+1
<linux/sched/task_stack.h> We are going to split <linux/sched/task_stack.h> out of <linux/sched.h>, which will have to be picked up from other headers and a couple of .c files. Create a trivial placeholder <linux/sched/task_stack.h> file that just maps to <linux/sched.h> to make this patch obviously correct and bisectable. Include the new header in the files that are going to need it. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02sched/headers: Prepare to move the memalloc_noio_*() APIs to <linux/sched/mm.h>Ingo Molnar2-0/+2
Update the .c files that depend on these APIs. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02sched/headers: Prepare to move signal wakeup & sigpending methods from ↵Ingo Molnar1-0/+1
<linux/sched.h> into <linux/sched/signal.h> Fix up affected files that include this signal functionality via sched.h. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02sched/headers: Prepare for new header dependencies before moving code to ↵Ingo Molnar3-0/+6
<linux/sched/signal.h> We are going to split <linux/sched/signal.h> out of <linux/sched.h>, which will have to be picked up from other headers and a couple of .c files. Create a trivial placeholder <linux/sched/signal.h> file that just maps to <linux/sched.h> to make this patch obviously correct and bisectable. Include the new header in the files that are going to need it. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02sched/headers: Prepare for new header dependencies before moving code to ↵Ingo Molnar6-0/+6
<linux/sched/clock.h> We are going to split <linux/sched/clock.h> out of <linux/sched.h>, which will have to be picked up from other headers and .c files. Create a trivial placeholder <linux/sched/clock.h> file that just maps to <linux/sched.h> to make this patch obviously correct and bisectable. Include the new header in the files that are going to need it. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2026-01-18 20:41:35 +0300