| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
[ Upstream commit a913d1f6a7f607c110aeef8b58c8988f47a4b24e ]
Following test can cause IO hang:
mdadm -CvR /dev/md0 -l10 -n4 /dev/sd[abcd] --assume-clean --chunk=64K --bitmap=none
sleep 5
echo 1 > /sys/block/sda/device/delete
echo 1 > /sys/block/sdb/device/delete
echo 1 > /sys/block/sdc/device/delete
echo 1 > /sys/block/sdd/device/delete
dd if=/dev/md0 of=/dev/null bs=8k count=1 iflag=direct
Root cause:
1) all disks removed, however all rdevs in the array is still in sync,
IO will be issued normally.
2) IO failure from sda, and set badblocks failed, sda will be faulty
and MD_SB_CHANGING_PENDING will be set.
3) error recovery try to recover this IO from other disks, IO will be
issued to sdb, sdc, and sdd.
4) IO failure from sdb, and set badblocks failed again, now array is
broken and will become read-only.
5) IO failure from sdc and sdd, however, stripe can't be handled anymore
because MD_SB_CHANGING_PENDING is set:
handle_stripe
handle_stripe
if (test_bit MD_SB_CHANGING_PENDING)
set_bit STRIPE_HANDLE
goto finish
// skip handling failed stripe
release_stripe
if (test_bit STRIPE_HANDLE)
list_add_tail conf->hand_list
6) later raid5d can't handle failed stripe as well:
raid5d
md_check_recovery
md_update_sb
if (!md_is_rdwr())
// can't clear pending bit
return
if (test_bit MD_SB_CHANGING_PENDING)
break;
// can't handle failed stripe
Since MD_SB_CHANGING_PENDING can never be cleared for read-only array,
fix this problem by skip this checking for read-only array.
Link: https://lore.kernel.org/linux-raid/20251117085557.770572-3-yukuai@fnnas.com
Fixes: d87f064f5874 ("md: never update metadata when array is read-only.")
Signed-off-by: Yu Kuai <yukuai@fnnas.com>
Reviewed-by: Li Nan <linan122@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit cd5fc653381811f1e0ba65f5d169918cab61476f upstream.
There are two BUG reports that raid5 will hang at
bitmap_startwrite([1],[2]), root cause is that bitmap start write and end
write is unbalanced, it's not quite clear where, and while reviewing raid5
code, it's found that bitmap operations can be optimized. For example,
for a 4 disks raid5, with chunksize=8k, if user issue a IO (0 + 48k) to
the array:
┌────────────────────────────────────────────────────────────┐
│chunk 0 │
│ ┌────────────┬─────────────┬─────────────┬────────────┼
│ sh0 │A0: 0 + 4k │A1: 8k + 4k │A2: 16k + 4k │A3: P │
│ ┼────────────┼─────────────┼─────────────┼────────────┼
│ sh1 │B0: 4k + 4k │B1: 12k + 4k │B2: 20k + 4k │B3: P │
┼──────┴────────────┴─────────────┴─────────────┴────────────┼
│chunk 1 │
│ ┌────────────┬─────────────┬─────────────┬────────────┤
│ sh2 │C0: 24k + 4k│C1: 32k + 4k │C2: P │C3: 40k + 4k│
│ ┼────────────┼─────────────┼─────────────┼────────────┼
│ sh3 │D0: 28k + 4k│D1: 36k + 4k │D2: P │D3: 44k + 4k│
└──────┴────────────┴─────────────┴─────────────┴────────────┘
Before this patch, 4 stripe head will be used, and each sh will attach
bio for 3 disks, and each attached bio will trigger
bitmap_startwrite() once, which means total 12 times.
- 3 times (0 + 4k), for (A0, A1 and A2)
- 3 times (4 + 4k), for (B0, B1 and B2)
- 3 times (8 + 4k), for (C0, C1 and C3)
- 3 times (12 + 4k), for (D0, D1 and D3)
After this patch, md upper layer will calculate that IO range (0 + 48k)
is corresponding to the bitmap (0 + 16k), and call bitmap_startwrite()
just once.
Noted that this patch will align bitmap ranges to the chunks, for example,
if user issue a IO (0 + 4k) to array:
- Before this patch, 1 time (0 + 4k), for A0;
- After this patch, 1 time (0 + 8k) for chunk 0;
Usually, one bitmap bit will represent more than one disk chunk, and this
doesn't have any difference. And even if user really created a array
that one chunk contain multiple bits, the overhead is that more data
will be recovered after power failure.
Also remove STRIPE_BITMAP_PENDING since it's not used anymore.
[1] https://lore.kernel.org/all/CAJpMwyjmHQLvm6zg1cmQErttNNQPDAAXPKM3xgTjMhbfts986Q@mail.gmail.com/
[2] https://lore.kernel.org/all/ADF7D720-5764-4AF3-B68E-1845988737AA@flyingcircus.io/
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20250109015145.158868-6-yukuai1@huaweicloud.com
Signed-off-by: Song Liu <song@kernel.org>
[There is no bitmap_operations, resolve conflicts by replacing
bitmap_ops->{startwrite, endwrite} with md_bitmap_{startwrite, endwrite}]
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9c89f604476cf15c31fbbdb043cff7fbf1dbe0cb upstream.
Bitmap is used for the whole array for raid1/raid10, hence IO for the
array can be used directly for bitmap. However, bitmap is used for
underlying disks for raid5, hence IO for the array can't be used
directly for bitmap.
Implement pers->bitmap_sector() for raid5 to convert IO ranges from the
array to the underlying disks.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20250109015145.158868-5-yukuai1@huaweicloud.com
Signed-off-by: Song Liu <song@kernel.org>
[ Resolve minor conflicts ]
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 4f0e7d0e03b7b80af84759a9e7cfb0f81ac4adae upstream.
For the case that IO failed for one rdev, the bit will be mark as NEEDED
in following cases:
1) If badblocks is set and rdev is not faulty;
2) If rdev is faulty;
Case 1) is useless because synchronize data to badblocks make no sense.
Case 2) can be replaced with mddev->degraded.
Also remove R1BIO_Degraded, R10BIO_Degraded and STRIPE_DEGRADED since
case 2) no longer use them.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20250109015145.158868-3-yukuai1@huaweicloud.com
Signed-off-by: Song Liu <song@kernel.org>
[ Resolve minor conflicts ]
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 08c50142a128dcb2d7060aa3b4c5db8837f7a46a upstream.
behind_write is only used in raid1, prepare to refactor
bitmap_{start/end}write(), there are no functional changes.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Xiao Ni <xni@redhat.com>
Link: https://lore.kernel.org/r/20250109015145.158868-2-yukuai1@huaweicloud.com
Signed-off-by: Song Liu <song@kernel.org>
[There is no bitmap_operations, resolve conflicts by exporting new api
md_bitmap_{start,end}_behind_write]
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 25b3a8237a03ec0b67b965b52d74862e77ef7115 upstream.
When handling an IO request, MD checks if a reshape is currently
happening, and if so, where the IO sector is in relation to the reshape
progress. MD uses conf->reshape_progress for both of these tasks. When
the reshape finishes, conf->reshape_progress is set to MaxSector. If
this occurs after MD checks if the reshape is currently happening but
before it calls ahead_of_reshape(), then ahead_of_reshape() will end up
comparing the IO sector against MaxSector. During a backwards reshape,
this will make MD think the IO sector is in the area not yet reshaped,
causing it to use the previous configuration, and map the IO to the
sector where that data was before the reshape.
This bug can be triggered by running the lvm2
lvconvert-raid-reshape-linear_to_raid6-single-type.sh test in a loop,
although it's very hard to reproduce.
Fix this by factoring the code that checks where the IO sector is in
relation to the reshape out to a helper called get_reshape_loc(),
which reads reshape_progress and reshape_safe while holding the
device_lock, and then rechecks if the reshape has finished before
calling ahead_of_reshape with the saved values.
Also use the helper during the REQ_NOWAIT check to see if the location
is inside of the reshape region.
Fixes: fef9c61fdfabf ("md/raid5: change reshape-progress measurement to cope with reshaping backwards.")
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240702151802.1632010-1-bmarzins@redhat.com
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 305a5170dc5cf3d395bb4c4e9239bca6d0b54b49 ]
Currently, mdadm support --revert-reshape to abort the reshape while
reassembling, as the test 07revert-grow. However, following BUG_ON()
can be triggerred by the test:
kernel BUG at drivers/md/raid5.c:6278!
invalid opcode: 0000 [#1] PREEMPT SMP PTI
irq event stamp: 158985
CPU: 6 PID: 891 Comm: md0_reshape Not tainted 6.9.0-03335-g7592a0b0049a #94
RIP: 0010:reshape_request+0x3f1/0xe60
Call Trace:
<TASK>
raid5_sync_request+0x43d/0x550
md_do_sync+0xb7a/0x2110
md_thread+0x294/0x2b0
kthread+0x147/0x1c0
ret_from_fork+0x59/0x70
ret_from_fork_asm+0x1a/0x30
</TASK>
Root cause is that --revert-reshape update the raid_disks from 5 to 4,
while reshape position is still set, and after reassembling the array,
reshape position will be read from super block, then during reshape the
checking of 'writepos' that is caculated by old reshape position will
fail.
Fix this panic the easy way first, by converting the BUG_ON() to
WARN_ON(), and stop the reshape if checkings fail.
Noted that mdadm must fix --revert-shape as well, and probably md/raid
should enhance metadata validation as well, however this means
reassemble will fail and there must be user tools to fix the wrong
metadata.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240611132251.1967786-13-yukuai1@huaweicloud.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
MD_SB_CHANGE_PENDING
commit 151f66bb618d1fd0eeb84acb61b4a9fa5d8bb0fa upstream.
Xiao reported that lvm2 test lvconvert-raid-takeover.sh can hang with
small possibility, the root cause is exactly the same as commit
bed9e27baf52 ("Revert "md/raid5: Wait for MD_SB_CHANGE_PENDING in raid5d"")
However, Dan reported another hang after that, and junxiao investigated
the problem and found out that this is caused by plugged bio can't issue
from raid5d().
Current implementation in raid5d() has a weird dependence:
1) md_check_recovery() from raid5d() must hold 'reconfig_mutex' to clear
MD_SB_CHANGE_PENDING;
2) raid5d() handles IO in a deadloop, until all IO are issued;
3) IO from raid5d() must wait for MD_SB_CHANGE_PENDING to be cleared;
This behaviour is introduce before v2.6, and for consequence, if other
context hold 'reconfig_mutex', and md_check_recovery() can't update
super_block, then raid5d() will waste one cpu 100% by the deadloop, until
'reconfig_mutex' is released.
Refer to the implementation from raid1 and raid10, fix this problem by
skipping issue IO if MD_SB_CHANGE_PENDING is still set after
md_check_recovery(), daemon thread will be woken up when 'reconfig_mutex'
is released. Meanwhile, the hang problem will be fixed as well.
Fixes: 5e2cf333b7bd ("md/raid5: Wait for MD_SB_CHANGE_PENDING in raid5d")
Cc: stable@vger.kernel.org # v5.19+
Reported-and-tested-by: Dan Moulding <dan@danm.net>
Closes: https://lore.kernel.org/all/20240123005700.9302-1-dan@danm.net/
Investigated-by: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20240322081005.1112401-1-yukuai1@huaweicloud.com
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit dfd2bf436709b2bccb78c2dda550dde93700efa7 ]
In raid5_cache_count():
if (conf->max_nr_stripes < conf->min_nr_stripes)
return 0;
return conf->max_nr_stripes - conf->min_nr_stripes;
The current check is ineffective, as the values could change immediately
after being checked.
In raid5_set_cache_size():
...
conf->min_nr_stripes = size;
...
while (size > conf->max_nr_stripes)
conf->min_nr_stripes = conf->max_nr_stripes;
...
Due to intermediate value updates in raid5_set_cache_size(), concurrent
execution of raid5_cache_count() and raid5_set_cache_size() may lead to
inconsistent reads of conf->max_nr_stripes and conf->min_nr_stripes.
The current checks are ineffective as values could change immediately
after being checked, raising the risk of conf->min_nr_stripes exceeding
conf->max_nr_stripes and potentially causing an integer overflow.
This possible bug is found by an experimental static analysis tool
developed by our team. This tool analyzes the locking APIs to extract
function pairs that can be concurrently executed, and then analyzes the
instructions in the paired functions to identify possible concurrency bugs
including data races and atomicity violations. The above possible bug is
reported when our tool analyzes the source code of Linux 6.2.
To resolve this issue, it is suggested to introduce local variables
'min_stripes' and 'max_stripes' in raid5_cache_count() to ensure the
values remain stable throughout the check. Adding locks in
raid5_cache_count() fails to resolve atomicity violations, as
raid5_set_cache_size() may hold intermediate values of
conf->min_nr_stripes while unlocked. With this patch applied, our tool no
longer reports the bug, with the kernel configuration allyesconfig for
x86_64. Due to the lack of associated hardware, we cannot test the patch
in runtime testing, and just verify it according to the code logic.
Fixes: edbe83ab4c27 ("md/raid5: allow the stripe_cache to grow and shrink.")
Cc: stable@vger.kernel.org
Signed-off-by: Gui-Dong Han <2045gemini@gmail.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240112071017.16313-1-2045gemini@gmail.com
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
This reverts commit bed9e27baf52a09b7ba2a3714f1e24e17ced386d.
The original set [1][2] was expected to undo a suboptimal fix in [2], and
replace it with a better fix [1]. However, as reported by Dan Moulding [2]
causes an issue with raid5 with journal device.
Revert [2] for now to close the issue. We will follow up on another issue
reported by Juxiao Bi, as [2] is expected to fix it. We believe this is a
good trade-off, because the latter issue happens less freqently.
In the meanwhile, we will NOT revert [1], as it contains the right logic.
[1] commit d6e035aad6c0 ("md: bypass block throttle for superblock update")
[2] commit bed9e27baf52 ("Revert "md/raid5: Wait for MD_SB_CHANGE_PENDING in raid5d"")
Reported-by: Dan Moulding <dan@danm.net>
Closes: https://lore.kernel.org/linux-raid/20240123005700.9302-1-dan@danm.net/
Fixes: bed9e27baf52 ("Revert "md/raid5: Wait for MD_SB_CHANGE_PENDING in raid5d"")
Cc: stable@vger.kernel.org # v5.19+
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit bed9e27baf52a09b7ba2a3714f1e24e17ced386d upstream.
This reverts commit 5e2cf333b7bd5d3e62595a44d598a254c697cd74.
That commit introduced the following race and can cause system hung.
md_write_start: raid5d:
// mddev->in_sync == 1
set "MD_SB_CHANGE_PENDING"
// running before md_write_start wakeup it
waiting "MD_SB_CHANGE_PENDING" cleared
>>>>>>>>> hung
wakeup mddev->thread
...
waiting "MD_SB_CHANGE_PENDING" cleared
>>>> hung, raid5d should clear this flag
but get hung by same flag.
The issue reverted commit fixing is fixed by last patch in a new way.
Fixes: 5e2cf333b7bd ("md/raid5: Wait for MD_SB_CHANGE_PENDING in raid5d")
Cc: stable@vger.kernel.org # v5.19+
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20231108182216.73611-2-junxiao.bi@oracle.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
reshape
commit c467e97f079f0019870c314996fae952cc768e82 upstream.
During a reshape or a RAID6 array such as expanding by adding an additional
disk, I/Os to the region of the array which have not yet been reshaped can
stall indefinitely. This is from errors in the stripe_ahead_of_reshape
function causing md to think the I/O is to a region in the actively
undergoing the reshape.
stripe_ahead_of_reshape fails to account for the q disk having a sector
value of 0. By not excluding the q disk from the for loop, raid6 will always
generate a min_sector value of 0, causing a return value which stalls.
The function's max_sector calculation also uses min() when it should use
max(), causing the max_sector value to always be 0. During a backwards
rebuild this can cause the opposite problem where it allows I/O to advance
when it should wait.
Fixing these errors will allow safe I/O to advance in a timely manner and
delay only I/O which is unsafe due to stripes in the middle of undergoing
the reshape.
Fixes: 486f60558607 ("md/raid5: Check all disks in a stripe_head for reshape progress")
Cc: stable@vger.kernel.org # v6.0+
Signed-off-by: David Jeffery <djeffery@redhat.com>
Tested-by: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20231128181233.6187-1-djeffery@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When raid5_get_active_stripe is called with a ctx containing a stripe_head in
its batch_last pointer, it can cause a deadlock if the task sleeps waiting on
another stripe_head to become available. The stripe_head held by batch_last
can be blocking the advancement of other stripe_heads, leading to no
stripe_heads being released so raid5_get_active_stripe waits forever.
Like with the quiesce state handling earlier in the function, batch_last
needs to be released by raid5_get_active_stripe before it waits for another
stripe_head.
Fixes: 3312e6c887fe ("md/raid5: Keep a reference to last stripe_head for batch")
Cc: stable@vger.kernel.org # v6.0+
Signed-off-by: David Jeffery <djeffery@redhat.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20231002183422.13047-1-djeffery@redhat.com
|
|
Commit ba9d9f1a707f ("Revert "md: unlock mddev before reap sync_thread in
action_store"") removed the scenario of calling md_unregister_thread()
without holding mddev->reconfig_mutex, so add a lock holding check before
acquiring mddev->sync_thread by passing mdev to md_unregister_thread().
Signed-off-by: Li Lingfeng <lilingfeng3@huawei.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20230803071711.2546560-1-lilingfeng@huaweicloud.com
Signed-off-by: Song Liu <song@kernel.org>
|
|
Io will only be accounted as done from raid5_align_endio() if the io
succeeded, and io inflight counter will be leaked if such io failed.
Fix this problem by switching to use md_account_bio() for io accounting.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230621165110.1498313-4-yukuai1@huaweicloud.com
|
|
Currently, 'active_io' is grabbed before make_reqeust() is called, and
it's dropped immediately make_reqeust() returns. Hence 'active_io'
actually means io is dispatching, not io is inflight.
For raid0 and raid456 that io accounting is enabled, 'active_io' will
also be grabbed when bio is cloned for io accounting, and this 'active_io'
is dropped until io is done.
Always clone new bio so that 'active_io' will mean that io is inflight,
raid1 and raid10 will switch to use this method in later patches.
Now that bio will be cloned even if io accounting is disabled, also
rename related structure from '*_acct_*' to '*_clone_*'.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230621165110.1498313-3-yukuai1@huaweicloud.com
|
|
'io_acct_set' is only used for raid0 and raid456, prepare to use it for
raid1 and raid10, so that io accounting from different levels can be
consistent.
By the way, follow up patches will also use this io clone mechanism to
make sure 'active_io' represents in flight io, not io that is dispatching,
so that mddev_suspend will wait for io to be done as designed.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230621165110.1498313-2-yukuai1@huaweicloud.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
"There are three areas of note:
A bunch of strlcpy()->strscpy() conversions ended up living in my tree
since they were either Acked by maintainers for me to carry, or got
ignored for multiple weeks (and were trivial changes).
The compiler option '-fstrict-flex-arrays=3' has been enabled
globally, and has been in -next for the entire devel cycle. This
changes compiler diagnostics (though mainly just -Warray-bounds which
is disabled) and potential UBSAN_BOUNDS and FORTIFY _warning_
coverage. In other words, there are no new restrictions, just
potentially new warnings. Any new FORTIFY warnings we've seen have
been fixed (usually in their respective subsystem trees). For more
details, see commit df8fc4e934c12b.
The under-development compiler attribute __counted_by has been added
so that we can start annotating flexible array members with their
associated structure member that tracks the count of flexible array
elements at run-time. It is possible (likely?) that the exact syntax
of the attribute will change before it is finalized, but GCC and Clang
are working together to sort it out. Any changes can be made to the
macro while we continue to add annotations.
As an example of that last case, I have a treewide commit waiting with
such annotations found via Coccinelle:
https://git.kernel.org/linus/adc5b3cb48a049563dc673f348eab7b6beba8a9b
Also see commit dd06e72e68bcb4 for more details.
Summary:
- Fix KMSAN vs FORTIFY in strlcpy/strlcat (Alexander Potapenko)
- Convert strreplace() to return string start (Andy Shevchenko)
- Flexible array conversions (Arnd Bergmann, Wyes Karny, Kees Cook)
- Add missing function prototypes seen with W=1 (Arnd Bergmann)
- Fix strscpy() kerndoc typo (Arne Welzel)
- Replace strlcpy() with strscpy() across many subsystems which were
either Acked by respective maintainers or were trivial changes that
went ignored for multiple weeks (Azeem Shaikh)
- Remove unneeded cc-option test for UBSAN_TRAP (Nick Desaulniers)
- Add KUnit tests for strcat()-family
- Enable KUnit tests of FORTIFY wrappers under UML
- Add more complete FORTIFY protections for strlcat()
- Add missed disabling of FORTIFY for all arch purgatories.
- Enable -fstrict-flex-arrays=3 globally
- Tightening UBSAN_BOUNDS when using GCC
- Improve checkpatch to check for strcpy, strncpy, and fake flex
arrays
- Improve use of const variables in FORTIFY
- Add requested struct_size_t() helper for types not pointers
- Add __counted_by macro for annotating flexible array size members"
* tag 'hardening-v6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (54 commits)
netfilter: ipset: Replace strlcpy with strscpy
uml: Replace strlcpy with strscpy
um: Use HOST_DIR for mrproper
kallsyms: Replace all non-returning strlcpy with strscpy
sh: Replace all non-returning strlcpy with strscpy
of/flattree: Replace all non-returning strlcpy with strscpy
sparc64: Replace all non-returning strlcpy with strscpy
Hexagon: Replace all non-returning strlcpy with strscpy
kobject: Use return value of strreplace()
lib/string_helpers: Change returned value of the strreplace()
jbd2: Avoid printing outside the boundary of the buffer
checkpatch: Check for 0-length and 1-element arrays
riscv/purgatory: Do not use fortified string functions
s390/purgatory: Do not use fortified string functions
x86/purgatory: Do not use fortified string functions
acpi: Replace struct acpi_table_slit 1-element array with flex-array
clocksource: Replace all non-returning strlcpy with strscpy
string: use __builtin_memcpy() in strlcpy/strlcat
staging: most: Replace all non-returning strlcpy with strscpy
drm/i2c: tda998x: Replace all non-returning strlcpy with strscpy
...
|
|
Pull block updates from Jens Axboe:
- NVMe pull request via Keith:
- Various cleanups all around (Irvin, Chaitanya, Christophe)
- Better struct packing (Christophe JAILLET)
- Reduce controller error logs for optional commands (Keith)
- Support for >=64KiB block sizes (Daniel Gomez)
- Fabrics fixes and code organization (Max, Chaitanya, Daniel
Wagner)
- bcache updates via Coly:
- Fix a race at init time (Mingzhe Zou)
- Misc fixes and cleanups (Andrea, Thomas, Zheng, Ye)
- use page pinning in the block layer for dio (David)
- convert old block dio code to page pinning (David, Christoph)
- cleanups for pktcdvd (Andy)
- cleanups for rnbd (Guoqing)
- use the unchecked __bio_add_page() for the initial single page
additions (Johannes)
- fix overflows in the Amiga partition handling code (Michael)
- improve mq-deadline zoned device support (Bart)
- keep passthrough requests out of the IO schedulers (Christoph, Ming)
- improve support for flush requests, making them less special to deal
with (Christoph)
- add bdev holder ops and shutdown methods (Christoph)
- fix the name_to_dev_t() situation and use cases (Christoph)
- decouple the block open flags from fmode_t (Christoph)
- ublk updates and cleanups, including adding user copy support (Ming)
- BFQ sanity checking (Bart)
- convert brd from radix to xarray (Pankaj)
- constify various structures (Thomas, Ivan)
- more fine grained persistent reservation ioctl capability checks
(Jingbo)
- misc fixes and cleanups (Arnd, Azeem, Demi, Ed, Hengqi, Hou, Jan,
Jordy, Li, Min, Yu, Zhong, Waiman)
* tag 'for-6.5/block-2023-06-23' of git://git.kernel.dk/linux: (266 commits)
scsi/sg: don't grab scsi host module reference
ext4: Fix warning in blkdev_put()
block: don't return -EINVAL for not found names in devt_from_devname
cdrom: Fix spectre-v1 gadget
block: Improve kernel-doc headers
blk-mq: don't insert passthrough request into sw queue
bsg: make bsg_class a static const structure
ublk: make ublk_chr_class a static const structure
aoe: make aoe_class a static const structure
block/rnbd: make all 'class' structures const
block: fix the exclusive open mask in disk_scan_partitions
block: add overflow checks for Amiga partition support
block: change all __u32 annotations to __be32 in affs_hardblocks.h
block: fix signed int overflow in Amiga partition support
block: add capacity validation in bdev_add_partition()
block: fine-granular CAP_SYS_ADMIN for Persistent Reservation
block: disallow Persistent Reservation on partitions
reiserfs: fix blkdev_put() warning from release_journal_dev()
block: fix wrong mode for blkdev_get_by_dev() from disk_scan_partitions()
block: document the holder argument to blkdev_get_by_path
...
|
|
When recovery is interrupted (reboot, etc.) check for MD_RECOVERY_RUNNING
is not enough to tell recovery is in progress. Also check recovery_cp
before starting reshape.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230529133410.2125914-1-yukuai1@huaweicloud.com
|
|
Currently, there are many places that md_thread can be accessed without
protection, following are known scenarios that can cause
null-ptr-dereference or uaf:
1) sync_thread that is allocated and started from md_start_sync()
2) mddev->thread can be accessed directly from timeout_store() and
md_bitmap_daemon_work()
3) md_unregister_thread() from action_store().
Currently, a global spinlock 'pers_lock' is borrowed to protect
'mddev->thread' in some places, this problem can be fixed likewise,
however, use a global lock for all the cases is not good.
Fix this problem by protecting all md_thread with rcu.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230523021017.3048783-6-yukuai1@huaweicloud.com
|
|
If reshape is in progress and io across reshape_position is issued, such
io will wait for reshape to make progress(see details in the case that
make_stripe_request() return STRIPE_SCHEDULE_AND_RETRY).
It has been reported several times that if system reboot while growing
raid5 to raid6, array assemble will hang infinitely([1, 2]). This is
because following deadlock is triggered:
1) a normal io is waiting for reshape to progress, this io can be from
system-udevd or mdadm.
2) while assemble, mdadm tries to suspend the array, hence
'reconfig_mutex' is held and mddev_suspend() must wait for normal io
to be done.
3) daemon thread can't start reshape because 'reconfig_mutex' can't be
held.
1) and 3) is unbreakable because they're foundation design. In order to
break 2), following is possible solutions that I can think of:
a) Let mddev_suspend() fail is not a good option, because this will
break many scenarios since mddev_suspend() doesn't fail before.
b) Fail the io that is waiting for reshape to make progress from
mddev_suspend().
c) Return false for the io that is waiting for reshape to make
progress from raid5_make_request(), and these io will wait for
suspend to be done in md_handle_request(), where 'active_io' is
not grabbed.
c) sounds better than b), however, b) is used because it's easy and
straightforward, and it's verified that mdadm can assemble in this case.
On the other hand, c) breaks the logic that mddev_suspend() will wait
for submitted io to be completely handled.
Fix the problem by checking reshape in mddev_suspend(), if reshape can't
make progress and there are still some io waiting for reshape, fail
those io.
[1] https://lore.kernel.org/all/CAFig2csUV2QiomUhj_t3dPOgV300dbQ6XtM9ygKPdXJFSH__Nw@mail.gmail.com/
[2] https://lore.kernel.org/all/CAO2ABipzbw6QL5eNa44CQHjiVa-LTvS696Mh9QaTw+qsUKFUCw@mail.gmail.com/
Reported-by: Jove <jovetoo@gmail.com>
Reported-by: David Gilmour <dgilmour76@gmail.com>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230512015610.821290-6-yukuai1@huaweicloud.com
|
|
If reshape is interrupted(for example, echo frozen to sync_action), then
rdev replacement can be set. It's safe because reshape is always prior to
resync in md_check_recovery(). However, if system reboots, then kernel will
complain cannot handle concurrent replacement and reshape and this array
is not able to assemble anymore.
Fix this problem by don't allow replacement until reshape is done.
Reported-by: Peter Neuwirth <reddunur@online.de>
Link: https://lore.kernel.org/linux-raid/e2f96772-bfbc-f43b-6da1-f520e5164536@online.de/
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230512015610.821290-2-yukuai1@huaweicloud.com
|
|
Replace old-style 1-element array of "dev" in struct stripe_head with
modern C99 flexible array. In the future, we can additionally annotate
it with the run-time size, found in the "disks" member.
Cc: Song Liu <song@kernel.org>
Cc: linux-raid@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Song Liu <song@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/lkml/20230522212114.gonna.589-kees@kernel.org/
---
It looks like this memory calculation:
memory = conf->min_nr_stripes * (sizeof(struct stripe_head) +
max_disks * ((sizeof(struct bio) + PAGE_SIZE))) / 1024;
... was already buggy (i.e. it included the single "dev" bytes in the
result). However, I'm not entirely sure if that is the right analysis,
since "dev" is not related to struct bio nor PAGE_SIZE?
|
|
'end_sector' is compared to 'rdev->recovery_offset', which is offset to
rdev, however, commit e82ed3a4fbb5 ("md/raid6: refactor
raid5_read_one_chunk") changes the calculation of 'end_sector' to offset
to the array. Fix this miscalculation.
Fixes: e82ed3a4fbb5 ("md/raid6: refactor raid5_read_one_chunk")
Cc: stable@vger.kernel.org # v5.12+
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230524014118.3172781-1-yukuai1@huaweicloud.com
|
|
Commit 7e55c60acfbb ("md/raid5: Pivot raid5_make_request()") changed the
order in which requests for underlying disks are created. Since for
large sequential IO adding of requests frequently races with md_raid5
thread submitting bios to underlying disks, this results in a change in
IO pattern because intermediate states of new order of request creation
result in more smaller discontiguous requests. For RAID5 on top of three
rotational disks our performance testing revealed this results in
regression in write throughput:
iozone -a -s 131072000 -y 4 -q 8 -i 0 -i 1 -R
before 7e55c60acfbb:
KB reclen write rewrite read reread
131072000 4 493670 525964 524575 513384
131072000 8 540467 532880 512028 513703
after 7e55c60acfbb:
KB reclen write rewrite read reread
131072000 4 421785 456184 531278 509248
131072000 8 459283 456354 528449 543834
To reduce the amount of discontiguous requests we can start generating
requests with the stripe with the lowest chunk offset as that has the
best chance of being adjacent to IO queued previously. This improves the
performance to:
KB reclen write rewrite read reread
131072000 4 497682 506317 518043 514559
131072000 8 514048 501886 506453 504319
restoring big part of the regression.
Fixes: 7e55c60acfbb ("md/raid5: Pivot raid5_make_request()")
Cc: stable@vger.kernel.org # v6.0+
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230417171537.17899-1-jack@suse.cz
|
|
clang with W=1 reports
drivers/md/raid5.c:7719:6: error: variable 'working_disks'
set but not used [-Werror,-Wunused-but-set-variable]
int working_disks = 0;
^
This variable is not used so remove it.
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230327132324.1769595-1-trix@redhat.com
|
|
A complicated deadlock exists when using the journal and an elevated
group_thrtead_cnt. It was found with loop devices, but its not clear
whether it can be seen with real disks. The deadlock can occur simply
by writing data with an fio script.
When the deadlock occurs, multiple threads will hang in different ways:
1) The group threads will hang in the blk-wbt code with bios waiting to
be submitted to the block layer:
io_schedule+0x70/0xb0
rq_qos_wait+0x153/0x210
wbt_wait+0x115/0x1b0
io_schedule+0x70/0xb0
rq_qos_wait+0x153/0x210
wbt_wait+0x115/0x1b0
__rq_qos_throttle+0x38/0x60
blk_mq_submit_bio+0x589/0xcd0
wbt_wait+0x115/0x1b0
__rq_qos_throttle+0x38/0x60
blk_mq_submit_bio+0x589/0xcd0
__submit_bio+0xe6/0x100
submit_bio_noacct_nocheck+0x42e/0x470
submit_bio_noacct+0x4c2/0xbb0
ops_run_io+0x46b/0x1a30
handle_stripe+0xcd3/0x36b0
handle_active_stripes.constprop.0+0x6f6/0xa60
raid5_do_work+0x177/0x330
Or:
io_schedule+0x70/0xb0
rq_qos_wait+0x153/0x210
wbt_wait+0x115/0x1b0
__rq_qos_throttle+0x38/0x60
blk_mq_submit_bio+0x589/0xcd0
__submit_bio+0xe6/0x100
submit_bio_noacct_nocheck+0x42e/0x470
submit_bio_noacct+0x4c2/0xbb0
flush_deferred_bios+0x136/0x170
raid5_do_work+0x262/0x330
2) The r5l_reclaim thread will hang in the same way, submitting a
bio to the block layer:
io_schedule+0x70/0xb0
rq_qos_wait+0x153/0x210
wbt_wait+0x115/0x1b0
__rq_qos_throttle+0x38/0x60
blk_mq_submit_bio+0x589/0xcd0
__submit_bio+0xe6/0x100
submit_bio_noacct_nocheck+0x42e/0x470
submit_bio_noacct+0x4c2/0xbb0
submit_bio+0x3f/0xf0
md_super_write+0x12f/0x1b0
md_update_sb.part.0+0x7c6/0xff0
md_update_sb+0x30/0x60
r5l_do_reclaim+0x4f9/0x5e0
r5l_reclaim_thread+0x69/0x30b
However, before hanging, the MD_SB_CHANGE_PENDING flag will be
set for sb_flags in r5l_write_super_and_discard_space(). This
flag will never be cleared because the submit_bio() call never
returns.
3) Due to the MD_SB_CHANGE_PENDING flag being set, handle_stripe()
will do no processing on any pending stripes and re-set
STRIPE_HANDLE. This will cause the raid5d thread to enter an
infinite loop, constantly trying to handle the same stripes
stuck in the queue.
The raid5d thread has a blk_plug that holds a number of bios
that are also stuck waiting seeing the thread is in a loop
that never schedules. These bios have been accounted for by
blk-wbt thus preventing the other threads above from
continuing when they try to submit bios. --Deadlock.
To fix this, add the same wait_event() that is used in raid5_do_work()
to raid5d() such that if MD_SB_CHANGE_PENDING is set, the thread will
schedule and wait until the flag is cleared. The schedule action will
flush the plug which will allow the r5l_reclaim thread to continue,
thus preventing the deadlock.
However, md_check_recovery() calls can also clear MD_SB_CHANGE_PENDING
from the same thread and can thus deadlock if the thread is put to
sleep. So avoid waiting if md_check_recovery() is being called in the
loop.
It's not clear when the deadlock was introduced, but the similar
wait_event() call in raid5_do_work() was added in 2017 by this
commit:
16d997b78b15 ("md/raid5: simplfy delaying of writes while metadata
is updated.")
Link: https://lore.kernel.org/r/7f3b87b6-b52a-f737-51d7-a4eec5c44112@deltatee.com
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Song Liu <song@kernel.org>
|
|
When running chunk-sized reads on disks with badblocks duplicate bio
free/puts are observed:
=============================================================================
BUG bio-200 (Not tainted): Object already free
-----------------------------------------------------------------------------
Allocated in mempool_alloc_slab+0x17/0x20 age=3 cpu=2 pid=7504
__slab_alloc.constprop.0+0x5a/0xb0
kmem_cache_alloc+0x31e/0x330
mempool_alloc_slab+0x17/0x20
mempool_alloc+0x100/0x2b0
bio_alloc_bioset+0x181/0x460
do_mpage_readpage+0x776/0xd00
mpage_readahead+0x166/0x320
blkdev_readahead+0x15/0x20
read_pages+0x13f/0x5f0
page_cache_ra_unbounded+0x18d/0x220
force_page_cache_ra+0x181/0x1c0
page_cache_sync_ra+0x65/0xb0
filemap_get_pages+0x1df/0xaf0
filemap_read+0x1e1/0x700
blkdev_read_iter+0x1e5/0x330
vfs_read+0x42a/0x570
Freed in mempool_free_slab+0x17/0x20 age=3 cpu=2 pid=7504
kmem_cache_free+0x46d/0x490
mempool_free_slab+0x17/0x20
mempool_free+0x66/0x190
bio_free+0x78/0x90
bio_put+0x100/0x1a0
raid5_make_request+0x2259/0x2450
md_handle_request+0x402/0x600
md_submit_bio+0xd9/0x120
__submit_bio+0x11f/0x1b0
submit_bio_noacct_nocheck+0x204/0x480
submit_bio_noacct+0x32e/0xc70
submit_bio+0x98/0x1a0
mpage_readahead+0x250/0x320
blkdev_readahead+0x15/0x20
read_pages+0x13f/0x5f0
page_cache_ra_unbounded+0x18d/0x220
Slab 0xffffea000481b600 objects=21 used=0 fp=0xffff8881206d8940 flags=0x17ffffc0010201(locked|slab|head|node=0|zone=2|lastcpupid=0x1fffff)
CPU: 0 PID: 34525 Comm: kworker/u24:2 Not tainted 6.0.0-rc2-localyes-265166-gf11c5343fa3f #143
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-1ubuntu1.1 04/01/2014
Workqueue: raid5wq raid5_do_work
Call Trace:
<TASK>
dump_stack_lvl+0x5a/0x78
dump_stack+0x10/0x16
print_trailer+0x158/0x165
object_err+0x35/0x50
free_debug_processing.cold+0xb7/0xbe
__slab_free+0x1ae/0x330
kmem_cache_free+0x46d/0x490
mempool_free_slab+0x17/0x20
mempool_free+0x66/0x190
bio_free+0x78/0x90
bio_put+0x100/0x1a0
mpage_end_io+0x36/0x150
bio_endio+0x2fd/0x360
md_end_io_acct+0x7e/0x90
bio_endio+0x2fd/0x360
handle_failed_stripe+0x960/0xb80
handle_stripe+0x1348/0x3760
handle_active_stripes.constprop.0+0x72a/0xaf0
raid5_do_work+0x177/0x330
process_one_work+0x616/0xb20
worker_thread+0x2bd/0x6f0
kthread+0x179/0x1b0
ret_from_fork+0x22/0x30
</TASK>
The double free is caused by an unnecessary bio_put() in the
if(is_badblock(...)) error path in raid5_read_one_chunk().
The error path was moved ahead of bio_alloc_clone() in c82aa1b76787c
("md/raid5: move checking badblock before clone bio in
raid5_read_one_chunk"). The previous code checked and freed align_bio
which required a bio_put. After the move that is no longer needed as
raid_bio is returned to the control of the common io path which
performs its own endio resulting in a double free on bad device blocks.
Fixes: c82aa1b76787c ("md/raid5: move checking badblock before clone bio in raid5_read_one_chunk")
Signed-off-by: David Sloan <david.sloan@eideticom.com>
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Guoqing Jiang <Guoqing.jiang@linux.dev>
Signed-off-by: Song Liu <song@kernel.org>
|
|
When doing degrade/recover tests using the journal a kernel BUG
is hit at drivers/md/raid5.c:4381 in handle_parity_checks5():
BUG_ON(!test_bit(R5_UPTODATE, &dev->flags));
This was found to occur because handle_stripe_fill() was skipped
for stripes in the journal due to a condition in that function.
Thus blocks were not fetched and R5_UPTODATE was not set when
the code reached handle_parity_checks5().
To fix this, don't skip handle_stripe_fill() unless the stripe is
for read.
Fixes: 07e83364845e ("md/r5cache: shift complex rmw from read path to write path")
Link: https://lore.kernel.org/linux-raid/e05c4239-41a9-d2f7-3cfa-4aa9d2cea8c1@deltatee.com/
Suggested-by: Song Liu <song@kernel.org>
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Song Liu <song@kernel.org>
|
|
The atomic_read() is not needed in many cases so only do
the read after the first checks are done.
Suggested-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Song Liu <song@kernel.org>
|
|
Drop the three bools in the prototype of raid5_get_active_stripe()
and replace them with a flags parameter.
At the same time, drop the distinction with __raid5_get_active_stripe().
Suggested-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Song Liu <song@kernel.org>
|
|
Refactor raid5_get_active_stripe() without the gotos with an
explicit infinite loop and some additional nesting.
Suggested-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Song Liu <song@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Most of the MM queue. A few things are still pending.
Liam's maple tree rework didn't make it. This has resulted in a few
other minor patch series being held over for next time.
Multi-gen LRU still isn't merged as we were waiting for mapletree to
stabilize. The current plan is to merge MGLRU into -mm soon and to
later reintroduce mapletree, with a view to hopefully getting both
into 6.1-rc1.
Summary:
- The usual batches of cleanups from Baoquan He, Muchun Song, Miaohe
Lin, Yang Shi, Anshuman Khandual and Mike Rapoport
- Some kmemleak fixes from Patrick Wang and Waiman Long
- DAMON updates from SeongJae Park
- memcg debug/visibility work from Roman Gushchin
- vmalloc speedup from Uladzislau Rezki
- more folio conversion work from Matthew Wilcox
- enhancements for coherent device memory mapping from Alex Sierra
- addition of shared pages tracking and CoW support for fsdax, from
Shiyang Ruan
- hugetlb optimizations from Mike Kravetz
- Mel Gorman has contributed some pagealloc changes to improve
latency and realtime behaviour.
- mprotect soft-dirty checking has been improved by Peter Xu
- Many other singleton patches all over the place"
[ XFS merge from hell as per Darrick Wong in
https://lore.kernel.org/all/YshKnxb4VwXycPO8@magnolia/ ]
* tag 'mm-stable-2022-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (282 commits)
tools/testing/selftests/vm/hmm-tests.c: fix build
mm: Kconfig: fix typo
mm: memory-failure: convert to pr_fmt()
mm: use is_zone_movable_page() helper
hugetlbfs: fix inaccurate comment in hugetlbfs_statfs()
hugetlbfs: cleanup some comments in inode.c
hugetlbfs: remove unneeded header file
hugetlbfs: remove unneeded hugetlbfs_ops forward declaration
hugetlbfs: use helper macro SZ_1{K,M}
mm: cleanup is_highmem()
mm/hmm: add a test for cross device private faults
selftests: add soft-dirty into run_vmtests.sh
selftests: soft-dirty: add test for mprotect
mm/mprotect: fix soft-dirty check in can_change_pte_writable()
mm: memcontrol: fix potential oom_lock recursion deadlock
mm/gup.c: fix formatting in check_and_migrate_movable_page()
xfs: fail dax mount if reflink is enabled on a partition
mm/memcontrol.c: remove the redundant updating of stats_flush_threshold
userfaultfd: don't fail on unrecognized features
hugetlb_cgroup: fix wrong hugetlb cgroup numa stat
...
|
|
In line 2884, "raid5_release_stripe(sh);" drops the reference to sh and
may cause sh to be released. However, sh is subsequently used in lines
2886 "if (sh->batch_head && sh != sh->batch_head)". This may result in an
use-after-free bug.
It can be fixed by moving "raid5_release_stripe(sh);" to the bottom of
the function.
Signed-off-by: Wentao_Liang <Wentao_Liang_g@163.com>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
A race condition exists where if raid5_quiesce() is called in the
middle of a request that has set batch_last, it will deadlock.
batch_last will hold a reference to a stripe when raid5_quiesce() is
called. This will cause the next raid5_get_active_stripe() call to
sleep waiting for the quiesce to finish, but the raid5_quiesce() thread
will wait for active_stripes to go to zero which will never happen
because request thread is waiting for the quiesce to stop.
Fix this by creating a special __raid5_get_active_stripe() function
which takes the request context and clears the last_batch before
sleeping.
While we're at it, change the arguments of raid5_get_active_stripe()
to bools.
Fixes: 3312e6c887fe ("md/raid5: Keep a reference to last stripe_head for batch")
Reported-by: David Sloan <David.Sloan@eideticom.com>
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Move stripe_request_ctx up. No functional changes intended.
This will be necessary in the next patch to release the batch_last
in the context before sleeping.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Now that raid5_get_active_stripe() has been refactored it is appearant
that r5c_check_stripe_cache_usage() doesn't need to be called in
the wait_for_stripe branch.
r5c_check_stripe_cache_usage() will only conditionally call
r5l_wake_reclaim(), but that function is called two lines later.
Drop the call for cleanup.
Reported-by: Martin Oliveira <martin.oliveira@eideticom.com>
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The logic to wait_for_stripe is difficult to parse being on so many
lines and with confusing operator precedence. Move it to a helper
function to make it easier to read.
No functional changes intended.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Refactor the raid5_get_active_stripe() to read more linearly in
the order it's typically executed.
The init_stripe() call is called if a free stripe is found and the
function is exited early which removes a lot of if (sh) checks and
unindents the following code.
Remove the while loop in favour of the 'goto retry' pattern, which
reduces indentation further. And use a 'goto wait_for_stripe' instead
of an additional indent seeing it is the unusual path and this makes
the code easier to read.
No functional changes intended. Will make subsequent changes
in patches easier to understand.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
'first' will always be greater than or equal to 0, it is unnecessary to
repeat the 0 check, clean it up.
Signed-off-by: Jackie Liu <liuyun01@kylinos.cn>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
raid5_get_active_stripe() can sleep in various situations and it
is called by make_stripe_request() while inside the
prepare_to_wait()/finish_wait() section. Nested waits like this are
not supported.
This was noticed while making other changes that add different sleeps
to raid5_get_active_stripe() that caused a WARNING with
CONFIG_DEBUG_ATOMIC_SLEEP.
No ill effects have been noticed with the code as is, but theoretically
a nested and here could cause a dead lock so it should be fixed.
To fix this, convert the prepare_to_wait() call to use wake_woken()
which supports nested sleeps.
Link: https://lwn.net/Articles/628628/
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
For unaligned IO that have nearly maximum sectors, the number of stripes
will end up being one greater than the size of the bitmap. When this
happens, the last stripe in the IO will not be processed as it should
be, resulting in data corruption.
However, this is not normally seen when the backing block devices have
4K physical block sizes since the block layer will split the request
before that happens.
To fix this increase the bitmap size by one bit and ensure the full
number of stripes are checked when calling find_first_bit().
Reported-by: David Sloan <David.Sloan@eideticom.com>
Fixes: 7e55c60acfbb ("md/raid5: Pivot raid5_make_request()")
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The block layer defaults the maximum segments to 128, which means
requests tend to get split around the 512KB depending on how many
pages can be merged. There's no such restriction in the raid5 code
so increase the limit to USHRT_MAX so that larger requests can be
sent as one.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add a debug print for raid5_make_request() so that each request is
printed and add the logical sector number to the debug print in
__add_stripe_bio().
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
raid5_make_request() loops through every page in the request,
finds the appropriate stripe and adds the bio for that page in the
disk.
This causes a great deal of contention on the hash_lock and extra
work seeing each stripe must be found once for every data disk.
The number of times a stripe must be found can be reduced by pivoting
raid5_make_request() so that it loops through every stripe and then
loops through every disk in that stripe to see if the bio must be
added. This reduces the number of times the hash lock must be taken
by a factor equal to the number of data disks.
To accomplish this, the logical sectors that have already been added
must be tracked. Tracking them is done with a bitmap: the bits
for all pages are set at the start of the request and each bit
is cleared once the bio is added to a stripe.
Finding the next sector to be done is then just a call to
find_first_bit() so that sectors that have been done can simply be
skipped.
One minor downside is that the maximum sectors for a request must be
limited so that the bitmap can be appropriately sized on the stack.
This limit is arbitrarily chosen to be 256 stripe pages which works out
to 1MB if PAGE_SIZE == DEFAULT_STRIPE_SIZE. This doesn't actually
restrict the maximum request further seeing the default block queue
settings are used which restricts the number of segments to 128 (which
results in request sizes that are approximately 512KB).
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When testing if a previous stripe has had reshape expand past it, use
the earliest or latest logical sector in all the disks for that stripe
head. This will allow adding multiple disks at a time in a subesquent
patch.
To do this cleaner, refactor the check into a helper function called
stripe_ahead_of_reshape().
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Factor out two helper functions from add_stripe_bio(): one to check for
overlap (stripe_bio_overlaps()), and one to actually add the bio to the
stripe (__add_stripe_bio()). The latter function will always succeed.
This will be useful in the next patch so that overlap can be checked for
multiple disks before adding any
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When batching, every stripe head has to find the previous stripe head to
add to the batch list. This involves taking the hash lock which is
highly contended during IO.
Instead of finding the previous stripe_head each time, store a
reference to the previous stripe_head in a pointer so that it doesn't
require taking the contended lock another time.
The reference to the previous stripe must be released before scheduling
and waiting for work to get done. Otherwise, it can hold up
raid5_activate_delayed() and deadlock.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The for loop with retry label can be more cleanly expressed as a while
loop by moving the logical_sector increment into the success path.
No functional changes intended.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
