| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
[ Upstream commit 4f6d2e648cbe963b328cb8815290676da3866434 ]
There is not need to use a separate field in struct mddev, there are no
functional changes.
Link: https://lore.kernel.org/linux-raid/20260114171241.3043364-4-yukuai@fnnas.com
Signed-off-by: Yu Kuai <yukuai@fnnas.com>
Reviewed-by: Li Nan <linan122@huawei.com>
Stable-dep-of: a286cb88ddb2 ("md/raid1: honor REQ_NOWAIT when waiting for behind writes")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6b8a26af065ddc93de2aa5c9f0df98dce9723442 ]
put_all_bios() always drops devs[i].bio, but it only drops
devs[i].repl_bio when r10_bio->read_slot < 0. If discard reuses an
r10bio that was previously used for a read, read_slot can still be
non-negative, and discard cleanup can skip bio_put() on repl_bio.
Reset read_slot to -1 when preparing an r10bio for discard so the
replacement bio is always released correctly.
Fixes: d30588b2731f ("md/raid10: improve raid10 discard request")
Signed-off-by: Chen Cheng <chencheng@fnnas.com>
Reviewed-by: Xiao Ni <xiao@kernel.org>
Link: https://patch.msgid.link/20260515093019.3436882-1-chencheng@fnnas.com
Signed-off-by: Yu Kuai <yukuai@fygo.io>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 9aa6d860b0930e2f72795665c42c44252a558a0c upstream.
setup_geo() extracts near_copies (nc) and far_copies (fc) from the
user-provided layout parameter without checking for zero. When fc=0
with the "improved" far set layout selected, 'geo->far_set_size =
disks / fc' triggers a divide-by-zero.
Validate nc and fc immediately after extraction, returning -1 if
either is zero.
Fixes: 475901aff158 ("MD RAID10: Improve redundancy for 'far' and 'offset' algorithms (part 1)")
Cc: stable@vger.kernel.org
Signed-off-by: Junrui Luo <moonafterrain@outlook.com>
Link: https://lore.kernel.org/linux-raid/SYBPR01MB7881A5E2556806CC1D318582AF232@SYBPR01MB7881.ausprd01.prod.outlook.com
Signed-off-by: Yu Kuai <yukuai@fnnas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7d96f3120a7fb7210d21b520c5b6f495da6ba436 upstream.
When an array check is running it will raise the barrier at which point
normal requests will become blocked and increment the nr_pending value to
signal there is work pending inside of wait_barrier(). NOWAIT requests
do not block and so will return immediately with an error, and additionally
do not increment nr_pending in wait_barrier(). Upstream change commit
43806c3d5b9b ("raid10: cleanup memleak at raid10_make_request") added a
call to raid_end_bio_io() to fix a memory leak when NOWAIT requests hit
this condition. raid_end_bio_io() eventually calls allow_barrier() and
it will unconditionally do an atomic_dec_and_test(&conf->nr_pending) even
though the corresponding increment on nr_pending didn't happen in the
NOWAIT case.
This can be easily seen by starting a check operation while an application
is doing nowait IO on the same array. This results in a deadlocked state
due to nr_pending value underflowing and so the md resync thread gets stuck
waiting for nr_pending to == 0.
Output of r10conf state of the array when we hit this condition:
crash> struct r10conf
barrier = 1,
nr_pending = {
counter = -41
},
nr_waiting = 15,
nr_queued = 0,
Example of md_sync thread stuck waiting on raise_barrier() and other
requests stuck in wait_barrier():
md1_resync
[<0>] raise_barrier+0xce/0x1c0
[<0>] raid10_sync_request+0x1ca/0x1ed0
[<0>] md_do_sync+0x779/0x1110
[<0>] md_thread+0x90/0x160
[<0>] kthread+0xbe/0xf0
[<0>] ret_from_fork+0x34/0x50
[<0>] ret_from_fork_asm+0x1a/0x30
kworker/u1040:2+flush-253:4
[<0>] wait_barrier+0x1de/0x220
[<0>] regular_request_wait+0x30/0x180
[<0>] raid10_make_request+0x261/0x1000
[<0>] md_handle_request+0x13b/0x230
[<0>] __submit_bio+0x107/0x1f0
[<0>] submit_bio_noacct_nocheck+0x16f/0x390
[<0>] ext4_io_submit+0x24/0x40
[<0>] ext4_do_writepages+0x254/0xc80
[<0>] ext4_writepages+0x84/0x120
[<0>] do_writepages+0x7a/0x260
[<0>] __writeback_single_inode+0x3d/0x300
[<0>] writeback_sb_inodes+0x1dd/0x470
[<0>] __writeback_inodes_wb+0x4c/0xe0
[<0>] wb_writeback+0x18b/0x2d0
[<0>] wb_workfn+0x2a1/0x400
[<0>] process_one_work+0x149/0x330
[<0>] worker_thread+0x2d2/0x410
[<0>] kthread+0xbe/0xf0
[<0>] ret_from_fork+0x34/0x50
[<0>] ret_from_fork_asm+0x1a/0x30
Fixes: 43806c3d5b9b ("raid10: cleanup memleak at raid10_make_request")
Cc: stable@vger.kernel.org
Signed-off-by: Josh Hunt <johunt@akamai.com>
Link: https://lore.kernel.org/linux-raid/20260303005619.1352958-1-johunt@akamai.com
Signed-off-by: Yu Kuai <yukuai@fnnas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 99582edb3f62e8ee6c34512021368f53f9b091f2 ]
In raid10_sync_request(), 'any_working' indicates if any IO will
be submitted. When there's only one In_sync disk with badblocks,
'any_working' might be set to 1 but no IO is submitted. Fix it by
setting 'any_working' after badblock checks.
Link: https://lore.kernel.org/linux-raid/20260105110300.1442509-11-linan666@huaweicloud.com
Fixes: e875ecea266a ("md/raid10 record bad blocks as needed during recovery.")
Signed-off-by: Li Nan <linan122@huawei.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Yu Kuai <yukuai@fnnas.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block updates from Jens Axboe:
- NVMe pull request via Keith:
- FC target fixes (Daniel)
- Authentication fixes and updates (Martin, Chris)
- Admin controller handling (Kamaljit)
- Target lockdep assertions (Max)
- Keep-alive updates for discovery (Alastair)
- Suspend quirk (Georg)
- MD pull request via Yu:
- Add support for a lockless bitmap.
A key feature for the new bitmap are that the IO fastpath is
lockless. If a user issues lots of write IO to the same bitmap
bit in a short time, only the first write has additional overhead
to update bitmap bit, no additional overhead for the following
writes.
By supporting only resync or recover written data, means in the
case creating new array or replacing with a new disk, there is no
need to do a full disk resync/recovery.
- Switch ->getgeo() and ->bios_param() to using struct gendisk rather
than struct block_device.
- Rust block changes via Andreas. This series adds configuration via
configfs and remote completion to the rnull driver. The series also
includes a set of changes to the rust block device driver API: a few
cleanup patches, and a few features supporting the rnull changes.
The series removes the raw buffer formatting logic from
`kernel::block` and improves the logic available in `kernel::string`
to support the same use as the removed logic.
- floppy arch cleanups
- Reduce the number of dereferencing needed for ublk commands
- Restrict supported sockets for nbd. Mostly done to eliminate a class
of issues perpetually reported by syzbot, by using nonsensical socket
setups.
- A few s390 dasd block fixes
- Fix a few issues around atomic writes
- Improve DMA interation for integrity requests
- Improve how iovecs are treated with regards to O_DIRECT aligment
constraints.
We used to require each segment to adhere to the constraints, now
only the request as a whole needs to.
- Clean up and improve p2p support, enabling use of p2p for metadata
payloads
- Improve locking of request lookup, using SRCU where appropriate
- Use page references properly for brd, avoiding very long RCU sections
- Fix ordering of recursively submitted IOs
- Clean up and improve updating nr_requests for a live device
- Various fixes and cleanups
* tag 'for-6.18/block-20250929' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: (164 commits)
s390/dasd: enforce dma_alignment to ensure proper buffer validation
s390/dasd: Return BLK_STS_INVAL for EINVAL from do_dasd_request
ublk: remove redundant zone op check in ublk_setup_iod()
nvme: Use non zero KATO for persistent discovery connections
nvmet: add safety check for subsys lock
nvme-core: use nvme_is_io_ctrl() for I/O controller check
nvme-core: do ioccsz/iorcsz validation only for I/O controllers
nvme-core: add method to check for an I/O controller
blk-cgroup: fix possible deadlock while configuring policy
blk-mq: fix null-ptr-deref in blk_mq_free_tags() from error path
blk-mq: Fix more tag iteration function documentation
selftests: ublk: fix behavior when fio is not installed
ublk: don't access ublk_queue in ublk_unmap_io()
ublk: pass ublk_io to __ublk_complete_rq()
ublk: don't access ublk_queue in ublk_need_complete_req()
ublk: don't access ublk_queue in ublk_check_commit_and_fetch()
ublk: don't pass ublk_queue to ublk_fetch()
ublk: don't access ublk_queue in ublk_config_io_buf()
ublk: don't access ublk_queue in ublk_check_fetch_buf()
ublk: pass q_id and tag to __ublk_check_and_get_req()
...
|
|
The parameter max_hw_wzeroes_unmap_sectors in queue_limits should be
equal to max_write_zeroes_sectors if it is set to a non-zero value.
However, the stacked md drivers call md_init_stacking_limits() to
initialize this parameter to UINT_MAX but only adjust
max_write_zeroes_sectors when setting limits. Therefore, this
discrepancy triggers a value check failure in blk_validate_limits().
$ modprobe scsi_debug num_parts=2 dev_size_mb=8 lbprz=1 lbpws=1
$ mdadm --create /dev/md0 --level=0 --raid-device=2 /dev/sda1 /dev/sda2
mdadm: Defaulting to version 1.2 metadata
mdadm: RUN_ARRAY failed: Invalid argument
Fix this failure by explicitly setting max_hw_wzeroes_unmap_sectors to
max_write_zeroes_sectors. Since the linear and raid0 drivers support
write zeroes, so they can support unmap write zeroes operation if all of
the backend devices support it. However, the raid1/10/5 drivers don't
support write zeroes, so we have to set it to zero.
Fixes: 0c40d7cb5ef3 ("block: introduce max_{hw|user}_wzeroes_unmap_sectors to queue limits")
Reported-by: John Garry <john.g.garry@oracle.com>
Closes: https://lore.kernel.org/linux-block/803a2183-a0bb-4b7a-92f1-afc5097630d2@oracle.com/
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Tested-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Li Nan <linan122@huawei.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/linux-raid/20250910111107.3247530-2-yi.zhang@huaweicloud.com
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
|
|
Unify bio split code, prepare to fix ordering of split IO, the error path
is modified a bit, however no functional changes are intended:
- bio_submit_split_bioset() can fail the original bio directly
by split error, set R10BIO_Uptodate in this case to notify
raid_end_bio_io() that the original bio is returned already.
- set R10BIO_Uptodate and set error value to -EIO is useless now,
for r10_bio without R10BIO_Uptodate, -EIO will be returned for
original bio.
And discard is not handled, because discard is only split for
unaligned head and tail, and this can be considered slow path, the
reorder here does not matter much.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The new helper bio_submit_split_bioset() can failed the orginal bio on
split errors, prepare to handle this case in raid_end_bio_io().
The flag name is refer to the r1bio flag name.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If bio is split by internal handling like chunksize or badblocks, the
corresponding trace_block_split() is missing, resulting in blktrace
inability to catch BIO split events and making it harder to analyze the
BIO sequence.
Cc: stable@vger.kernel.org
Fixes: 4b1faf931650 ("block: Kill bio_pair_split()")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/mdraid/linux into for-6.18/block
Pull MD changes from Yu Kuai:
"Redundant data is used to enhance data fault tolerance, and the storage
method for redundant data vary depending on the RAID levels. And it's
important to maintain the consistency of redundant data.
Bitmap is used to record which data blocks have been synchronized and
which ones need to be resynchronized or recovered. Each bit in the
bitmap represents a segment of data in the array. When a bit is set,
it indicates that the multiple redundant copies of that data segment
may not be consistent. Data synchronization can be performed based on
the bitmap after power failure or readding a disk. If there is no
bitmap, a full disk synchronization is required.
Due to known performance issues with md-bitmap and the unreasonable
implementations:
- self-managed IO submitting like filemap_write_page();
- global spin_lock
I have decided not to continue optimizing based on the current bitmap
implementation, this new bitmap is invented without locking from IO fast
path and can be used with fast disks.
Key features for the new bitmap:
- IO fastpath is lockless, if user issues lots of write IO to the same
bitmap bit in a short time, only the first write has additional
overhead to update bitmap bit, no additional overhead for the
following writes;
- support only resync or recover written data, means in the case
creating new array or replacing with a new disk, there is no need to
do a full disk resync/recovery;"
* tag 'md-6.18-20250909' of gitolite.kernel.org:pub/scm/linux/kernel/git/mdraid/linux: (24 commits)
md/md-llbitmap: introduce new lockless bitmap
md/md-bitmap: make method bitmap_ops->daemon_work optional
md: add a new recovery_flag MD_RECOVERY_LAZY_RECOVER
md/md-bitmap: add a new method blocks_synced() in bitmap_operations
md/md-bitmap: add a new method skip_sync_blocks() in bitmap_operations
md/md-bitmap: delay registration of bitmap_ops until creating bitmap
md/md-bitmap: add a new sysfs api bitmap_type
md: add a new mddev field 'bitmap_id'
md/md-bitmap: support discard for bitmap ops
md: factor out a helper raid_is_456()
md: add a new parameter 'offset' to md_super_write()
md/md-bitmap: introduce CONFIG_MD_BITMAP
md: check before referencing mddev->bitmap_ops
md/dm-raid: check before referencing mddev->bitmap_ops
md/raid5: check before referencing mddev->bitmap_ops
md/raid10: check before referencing mddev->bitmap_ops
md/raid1: check before referencing mddev->bitmap_ops
md/raid1: check bitmap before behind write
md/md-bitmap: handle the case bitmap is not enabled before end_sync()
md/md-bitmap: handle the case bitmap is not enabled before start_sync()
...
|
|
Just a simpler wrapper around bio_init for callers that want to
initialize a bio with inline bvecs.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Prepare to introduce CONFIG_MD_BITMAP.
Link: https://lore.kernel.org/linux-raid/20250707012711.376844-12-yukuai1@huaweicloud.com
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Xiao Ni <xni@redhat.com>
|
|
This case can be handled without knowing internal implementation.
Prepare to introduce CONFIG_MD_BITMAP.
Link: https://lore.kernel.org/linux-raid/20250707012711.376844-9-yukuai1@huaweicloud.com
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Xiao Ni <xni@redhat.com>
|
|
This case can be handled without knowing internal implementation.
Prepare to introduce CONFIG_MD_BITMAP.
Link: https://lore.kernel.org/linux-raid/20250707012711.376844-8-yukuai1@huaweicloud.com
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Xiao Ni <xni@redhat.com>
|
|
It's set to 'false' for all callers, hence it's useless and can be
removed.
Link: https://lore.kernel.org/linux-raid/20250707012711.376844-3-yukuai1@huaweicloud.com
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Xiao Ni <xni@redhat.com>
|
|
'recovery_cp' was used to represent the progress of sync, but its name
contains recovery, which can cause confusion. Replaces 'recovery_cp'
with 'resync_offset' for clarity.
Signed-off-by: Li Nan <linan122@huawei.com>
Link: https://lore.kernel.org/linux-raid/20250722033340.1933388-1-linan666@huaweicloud.com
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
|
|
Pull block updates from Jens Axboe:
- MD pull request via Yu:
- call del_gendisk synchronously (Xiao)
- cleanup unused variable (John)
- cleanup workqueue flags (Ryo)
- fix faulty rdev can't be removed during resync (Qixing)
- NVMe pull request via Christoph:
- try PCIe function level reset on init failure (Keith Busch)
- log TLS handshake failures at error level (Maurizio Lombardi)
- pci-epf: do not complete commands twice if nvmet_req_init()
fails (Rick Wertenbroek)
- misc cleanups (Alok Tiwari)
- Removal of the pktcdvd driver
This has been more than a decade coming at this point, and some
recently revealed breakages that had it causing issues even for cases
where it isn't required made me re-pull the trigger on this one. It's
known broken and nobody has stepped up to maintain the code
- Series for ublk supporting batch commands, enabling the use of
multishot where appropriate
- Speed up ublk exit handling
- Fix for the two-stage elevator fixing which could leak data
- Convert NVMe to use the new IOVA based API
- Increase default max transfer size to something more reasonable
- Series fixing write operations on zoned DM devices
- Add tracepoints for zoned block device operations
- Prep series working towards improving blk-mq queue management in the
presence of isolated CPUs
- Don't allow updating of the block size of a loop device that is
currently under exclusively ownership/open
- Set chunk sectors from stacked device stripe size and use it for the
atomic write size limit
- Switch to folios in bcache read_super()
- Fix for CD-ROM MRW exit flush handling
- Various tweaks, fixes, and cleanups
* tag 'for-6.17/block-20250728' of git://git.kernel.dk/linux: (94 commits)
block: restore two stage elevator switch while running nr_hw_queue update
cdrom: Call cdrom_mrw_exit from cdrom_release function
sunvdc: Balance device refcount in vdc_port_mpgroup_check
nvme-pci: try function level reset on init failure
dm: split write BIOs on zone boundaries when zone append is not emulated
block: use chunk_sectors when evaluating stacked atomic write limits
dm-stripe: limit chunk_sectors to the stripe size
md/raid10: set chunk_sectors limit
md/raid0: set chunk_sectors limit
block: sanitize chunk_sectors for atomic write limits
ilog2: add max_pow_of_two_factor()
nvmet: pci-epf: Do not complete commands twice if nvmet_req_init() fails
nvme-tcp: log TLS handshake failures at error level
docs: nvme: fix grammar in nvme-pci-endpoint-target.rst
nvme: fix typo in status code constant for self-test in progress
nvmet: remove redundant assignment of error code in nvmet_ns_enable()
nvme: fix incorrect variable in io cqes error message
nvme: fix multiple spelling and grammar issues in host drivers
block: fix blk_zone_append_update_request_bio() kernel-doc
md/raid10: fix set but not used variable in sync_request_write()
...
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mdraid/linux into for-6.17/block
Pull MD updates from Yu:
"- call del_gendisk synchronously, from Xiao
- cleanup unused variable, from John
- cleanup workqueue flags, from Ryo
- fix faulty rdev can't be removed during resync, from Qixing"
* tag 'md-6.17-20250722' of https://git.kernel.org/pub/scm/linux/kernel/git/mdraid/linux:
md/raid10: fix set but not used variable in sync_request_write()
md: allow removing faulty rdev during resync
md/raid5: unset WQ_CPU_INTENSIVE for raid5 unbound workqueue
md: remove/add redundancy group only in level change
md: Don't clear MD_CLOSING until mddev is freed
md: call del_gendisk in control path
|
|
Same as done for raid0, set chunk_sectors limit to appropriately set the
atomic write size limit.
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20250711105258.3135198-5-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Building with W=1 reports the following:
drivers/md/raid10.c: In function ‘sync_request_write’:
drivers/md/raid10.c:2441:21: error: variable ‘d’ set but not used [-Werror=unused-but-set-variable]
2441 | int d;
| ^
cc1: all warnings being treated as errors
Remove the usage of that variable.
Fixes: 752d0464b78a ("md: clean up accounting for issued sync IO")
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/linux-raid/20250709104814.2307276-1-john.g.garry@oracle.com
Signed-off-by: Yu Kuai <yukuai@kernel.org>
|
|
RAID layers don't implement proper non-blocking semantics for
REQ_NOWAIT, making the flag potentially misleading when propagated
to member disks.
This patch clear REQ_NOWAIT from cloned bios in raid1/raid10. Retain
original bio's REQ_NOWAIT flag for upper layer error handling.
Maybe we can implement non-blocking I/O handling mechanisms within
RAID in future work.
Fixes: 9f346f7d4ea7 ("md/raid1,raid10: don't handle IO error for
REQ_RAHEAD and REQ_NOWAIT")
Signed-off-by: Zheng Qixing <zhengqixing@huawei.com>
Link: https://lore.kernel.org/linux-raid/20250702102341.1969154-1-zhengqixing@huaweicloud.com
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
|
|
If raid10_read_request or raid10_write_request registers a new
request and the REQ_NOWAIT flag is set, the code does not
free the malloc from the mempool.
unreferenced object 0xffff8884802c3200 (size 192):
comm "fio", pid 9197, jiffies 4298078271
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 88 41 02 00 00 00 00 00 .........A......
08 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace (crc c1a049a2):
__kmalloc+0x2bb/0x450
mempool_alloc+0x11b/0x320
raid10_make_request+0x19e/0x650 [raid10]
md_handle_request+0x3b3/0x9e0
__submit_bio+0x394/0x560
__submit_bio_noacct+0x145/0x530
submit_bio_noacct_nocheck+0x682/0x830
__blkdev_direct_IO_async+0x4dc/0x6b0
blkdev_read_iter+0x1e5/0x3b0
__io_read+0x230/0x1110
io_read+0x13/0x30
io_issue_sqe+0x134/0x1180
io_submit_sqes+0x48c/0xe90
__do_sys_io_uring_enter+0x574/0x8b0
do_syscall_64+0x5c/0xe0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
V4: changing backing tree to see if CKI tests will pass.
The patch code has not changed between any versions.
Fixes: c9aa889b035f ("md: raid10 add nowait support")
Signed-off-by: Nigel Croxon <ncroxon@redhat.com>
Link: https://lore.kernel.org/linux-raid/c0787379-9caa-42f3-b5fc-369aed784400@redhat.com
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
|
|
IO with REQ_RAHEAD or REQ_NOWAIT can fail early, even if the storage medium
is fine, hence record badblocks or remove the disk from array does not
make sense.
This problem if found by lvm2 test lvcreate-large-raid, where dm-zero
will fail read ahead IO directly.
Fixes: e879a0d9cb08 ("md/raid1,raid10: don't ignore IO flags")
Reported-and-tested-by: Mikulas Patocka <mpatocka@redhat.com>
Closes: https://lore.kernel.org/all/34fa755d-62c8-4588-8ee1-33cb1249bdf2@redhat.com/
Link: https://lore.kernel.org/linux-raid/20250527081407.3004055-1-yukuai1@huaweicloud.com
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
|
|
It's no longer used and can be removed, also remove the field
'gendisk->sync_io'.
Link: https://lore.kernel.org/linux-raid/20250506124903.2540268-10-yukuai1@huaweicloud.com
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Xiao Ni <xni@redhat.com>
|
|
md_account_bio() is not called from raid10_handle_discard(), now that we
handle bitmap inside md_account_bio(), also fix missing
bitmap_startwrite for discard.
Test whole disk discard for 20G raid10:
Before:
Device d/s dMB/s drqm/s %drqm d_await dareq-sz
md0 48.00 16.00 0.00 0.00 5.42 341.33
After:
Device d/s dMB/s drqm/s %drqm d_await dareq-sz
md0 68.00 20462.00 0.00 0.00 2.65 308133.65
Link: https://lore.kernel.org/linux-raid/20250325015746.3195035-1-yukuai1@huaweicloud.com
Fixes: 528bc2cf2fcc ("md/raid10: enable io accounting")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Acked-by: Coly Li <colyli@kernel.org>
|
|
Pull block updates from Jens Axboe:
- Fixes for integrity handling
- NVMe pull request via Keith:
- Secure concatenation for TCP transport (Hannes)
- Multipath sysfs visibility (Nilay)
- Various cleanups (Qasim, Baruch, Wang, Chen, Mike, Damien, Li)
- Correct use of 64-bit BARs for pci-epf target (Niklas)
- Socket fix for selinux when used in containers (Peijie)
- MD pull request via Yu:
- fix recovery can preempt resync (Li Nan)
- fix md-bitmap IO limit (Su Yue)
- fix raid10 discard with REQ_NOWAIT (Xiao Ni)
- fix raid1 memory leak (Zheng Qixing)
- fix mddev uaf (Yu Kuai)
- fix raid1,raid10 IO flags (Yu Kuai)
- some refactor and cleanup (Yu Kuai)
- Series cleaning up and fixing bugs in the bad block handling code
- Improve support for write failure simulation in null_blk
- Various lock ordering fixes
- Fixes for locking for debugfs attributes
- Various ublk related fixes and improvements
- Cleanups for blk-rq-qos wait handling
- blk-throttle fixes
- Fixes for loop dio and sync handling
- Fixes and cleanups for the auto-PI code
- Block side support for hardware encryption keys in blk-crypto
- Various cleanups and fixes
* tag 'for-6.15/block-20250322' of git://git.kernel.dk/linux: (105 commits)
nvmet: replace max(a, min(b, c)) by clamp(val, lo, hi)
nvme-tcp: fix selinux denied when calling sock_sendmsg
nvmet: pci-epf: Always configure BAR0 as 64-bit
nvmet: Remove duplicate uuid_copy
nvme: zns: Simplify nvme_zone_parse_entry()
nvmet: pci-epf: Remove redundant 'flush_workqueue()' calls
nvmet-fc: Remove unused functions
nvme-pci: remove stale comment
nvme-fc: Utilise min3() to simplify queue count calculation
nvme-multipath: Add visibility for queue-depth io-policy
nvme-multipath: Add visibility for numa io-policy
nvme-multipath: Add visibility for round-robin io-policy
nvmet: add tls_concat and tls_key debugfs entries
nvmet-tcp: support secure channel concatenation
nvmet: Add 'sq' argument to alloc_ctrl_args
nvme-fabrics: reset admin connection for secure concatenation
nvme-tcp: request secure channel concatenation
nvme-keyring: add nvme_tls_psk_refresh()
nvme: add nvme_auth_derive_tls_psk()
nvme: add nvme_auth_generate_digest()
...
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mdraid/linux into for-6.15/block
Merge MD changes from Yu:
"- fix recovery can preempt resync (Li Nan)
- fix md-bitmap IO limit (Su Yue)
- fix raid10 discard with REQ_NOWAIT (Xiao Ni)
- fix raid1 memory leak (Zheng Qixing)
- fix mddev uaf (Yu Kuai)
- fix raid1,raid10 IO flags (Yu Kuai)
- some refactor and cleanup (Yu Kuai)"
* tag 'md-6.15-20250312' of https://git.kernel.org/pub/scm/linux/kernel/git/mdraid/linux:
md/raid10: wait barrier before returning discard request with REQ_NOWAIT
md/md-bitmap: fix wrong bitmap_limit for clustermd when write sb
md/raid1,raid10: don't ignore IO flags
md/raid5: merge reshape_progress checking inside get_reshape_loc()
md: fix mddev uaf while iterating all_mddevs list
md: switch md-cluster to use md_submodle_head
md: don't export md_cluster_ops
md/md-cluster: cleanup md_cluster_ops reference
md: switch personalities to use md_submodule_head
md: introduce struct md_submodule_head and APIs
md: only include md-cluster.h if necessary
md: merge common code into find_pers()
md/raid1: fix memory leak in raid1_run() if no active rdev
md: ensure resync is prioritized over recovery
|
|
There is a truncation of badblocks length issue when set badblocks as
follow:
echo "2055 4294967299" > bad_blocks
cat bad_blocks
2055 3
Change 'sectors' argument type from 'int' to 'sector_t'.
This change avoids truncation of badblocks length for large sectors by
replacing 'int' with 'sector_t' (u64), enabling proper handling of larger
disk sizes and ensuring compatibility with 64-bit sector addressing.
Fixes: 9e0e252a048b ("badblocks: Add core badblock management code")
Signed-off-by: Zheng Qixing <zhengqixing@huawei.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Acked-by: Coly Li <colyli@kernel.org>
Link: https://lore.kernel.org/r/20250227075507.151331-13-zhengqixing@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
rdev_set_badblocks() only indicates success/failure, so convert its return
type from int to boolean for better semantic clarity.
rdev_clear_badblocks() return value is never used by any caller, convert it
to void. This removes unnecessary value returns.
Also update narrow_write_error() in both raid1 and raid10 to use boolean
return type to match rdev_set_badblocks().
Signed-off-by: Zheng Qixing <zhengqixing@huawei.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20250227075507.151331-12-zhengqixing@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
raid10_handle_discard should wait barrier before returning a discard bio
which has REQ_NOWAIT. And there is no need to print warning calltrace
if a discard bio has REQ_NOWAIT flag. Quality engineer usually checks
dmesg and reports error if dmesg has warning/error calltrace.
Fixes: c9aa889b035f ("md: raid10 add nowait support")
Signed-off-by: Xiao Ni <xni@redhat.com>
Acked-by: Coly Li <colyli@kernel.org>
Link: https://lore.kernel.org/linux-raid/20250306094938.48952-1-xni@redhat.com
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
|
|
If blk-wbt is enabled by default, it's found that raid write performance
is quite bad because all IO are throttled by wbt of underlying disks,
due to flag REQ_IDLE is ignored. And turns out this behaviour exist since
blk-wbt is introduced.
Other than REQ_IDLE, other flags should not be ignored as well, for
example REQ_META can be set for filesystems, clearing it can cause priority
reverse problems; And REQ_NOWAIT should not be cleared as well, because
io will wait instead of failing directly in underlying disks.
Fix those problems by keep IO flags from master bio.
Fises: f51d46d0e7cb ("md: add support for REQ_NOWAIT")
Fixes: e34cbd307477 ("blk-wbt: add general throttling mechanism")
Fixes: 5404bc7a87b9 ("[PATCH] Allow file systems to differentiate between data and meta reads")
Link: https://lore.kernel.org/linux-raid/20250227121657.832356-1-yukuai1@huaweicloud.com
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
|
|
Add a new field 'cluster_ops' and initialize it md_setup_cluster(), so
that the gloable variable 'md_cluter_ops' doesn't need to be exported.
Also prepare to switch md-cluster to use md_submod_head.
Link: https://lore.kernel.org/linux-raid/20250215092225.2427977-7-yukuai1@huaweicloud.com
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Su Yue <glass.su@suse.com>
|
|
Remove the global list 'pers_list', and switch to use md_submodule_head,
which is managed by xarry. Prepare to unify registration and unregistration
for all sub modules.
Link: https://lore.kernel.org/linux-raid/20250215092225.2427977-5-yukuai1@huaweicloud.com
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
|
|
md-cluster is only supportted by raid1 and raid10, there is no need to
include md-cluster.h for other personalities.
Also move APIs that is only used in md-cluster.c from md.h to
md-cluster.h.
Link: https://lore.kernel.org/linux-raid/20250215092225.2427977-3-yukuai1@huaweicloud.com
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Su Yue <glass.su@suse.com>
|
|
queue_limits_cancel_update() must only be called if
queue_limits_start_update() is called first. Remove the
queue_limits_cancel_update() calls from the raid*_set_limits() functions
because there is no corresponding queue_limits_start_update() call.
Cc: Christoph Hellwig <hch@lst.de>
Fixes: c6e56cf6b2e7 ("block: move integrity information into queue_limits")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/linux-raid/20250212171108.3483150-1-bvanassche@acm.org/
Signed-off-by: Yu Kuai <yukuai@kernel.org>
|
|
Currently only stacked devices need to explicitly enable atomic writes by
setting BLK_FEAT_ATOMIC_WRITES_STACKED flag.
This does not work well for device mapper stacking devices, as there many
sets of limits are stacked and what is the 'bottom' and 'top' device can
swapped. This means that BLK_FEAT_ATOMIC_WRITES_STACKED needs to be set
for many queue limits, which is messy.
Generalize enabling atomic writes enabling by ensuring that all devices
must explicitly set a flag - that includes NVMe, SCSI sd, and md raid.
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Mike Snitzer <snitzer@kernel.org>
Link: https://lore.kernel.org/r/20250116170301.474130-2-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
There are two BUG reports that raid5 will hang at
bitmap_startwrite([1],[2]), root cause is that bitmap start write and end
write is unbalanced, it's not quite clear where, and while reviewing raid5
code, it's found that bitmap operations can be optimized. For example,
for a 4 disks raid5, with chunksize=8k, if user issue a IO (0 + 48k) to
the array:
┌────────────────────────────────────────────────────────────┐
│chunk 0 │
│ ┌────────────┬─────────────┬─────────────┬────────────┼
│ sh0 │A0: 0 + 4k │A1: 8k + 4k │A2: 16k + 4k │A3: P │
│ ┼────────────┼─────────────┼─────────────┼────────────┼
│ sh1 │B0: 4k + 4k │B1: 12k + 4k │B2: 20k + 4k │B3: P │
┼──────┴────────────┴─────────────┴─────────────┴────────────┼
│chunk 1 │
│ ┌────────────┬─────────────┬─────────────┬────────────┤
│ sh2 │C0: 24k + 4k│C1: 32k + 4k │C2: P │C3: 40k + 4k│
│ ┼────────────┼─────────────┼─────────────┼────────────┼
│ sh3 │D0: 28k + 4k│D1: 36k + 4k │D2: P │D3: 44k + 4k│
└──────┴────────────┴─────────────┴─────────────┴────────────┘
Before this patch, 4 stripe head will be used, and each sh will attach
bio for 3 disks, and each attached bio will trigger
bitmap_startwrite() once, which means total 12 times.
- 3 times (0 + 4k), for (A0, A1 and A2)
- 3 times (4 + 4k), for (B0, B1 and B2)
- 3 times (8 + 4k), for (C0, C1 and C3)
- 3 times (12 + 4k), for (D0, D1 and D3)
After this patch, md upper layer will calculate that IO range (0 + 48k)
is corresponding to the bitmap (0 + 16k), and call bitmap_startwrite()
just once.
Noted that this patch will align bitmap ranges to the chunks, for example,
if user issue a IO (0 + 4k) to array:
- Before this patch, 1 time (0 + 4k), for A0;
- After this patch, 1 time (0 + 8k) for chunk 0;
Usually, one bitmap bit will represent more than one disk chunk, and this
doesn't have any difference. And even if user really created a array
that one chunk contain multiple bits, the overhead is that more data
will be recovered after power failure.
Also remove STRIPE_BITMAP_PENDING since it's not used anymore.
[1] https://lore.kernel.org/all/CAJpMwyjmHQLvm6zg1cmQErttNNQPDAAXPKM3xgTjMhbfts986Q@mail.gmail.com/
[2] https://lore.kernel.org/all/ADF7D720-5764-4AF3-B68E-1845988737AA@flyingcircus.io/
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20250109015145.158868-6-yukuai1@huaweicloud.com
Signed-off-by: Song Liu <song@kernel.org>
|
|
For the case that IO failed for one rdev, the bit will be mark as NEEDED
in following cases:
1) If badblocks is set and rdev is not faulty;
2) If rdev is faulty;
Case 1) is useless because synchronize data to badblocks make no sense.
Case 2) can be replaced with mddev->degraded.
Also remove R1BIO_Degraded, R10BIO_Degraded and STRIPE_DEGRADED since
case 2) no longer use them.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20250109015145.158868-3-yukuai1@huaweicloud.com
Signed-off-by: Song Liu <song@kernel.org>
|
|
behind_write is only used in raid1, prepare to refactor
bitmap_{start/end}write(), there are no functional changes.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Xiao Ni <xni@redhat.com>
Link: https://lore.kernel.org/r/20250109015145.158868-2-yukuai1@huaweicloud.com
Signed-off-by: Song Liu <song@kernel.org>
|
|
Pull more block updates from Jens Axboe:
- NVMe pull request via Keith:
- Use correct srcu list traversal (Breno)
- Scatter-gather support for metadata (Keith)
- Fabrics shutdown race condition fix (Nilay)
- Persistent reservations updates (Guixin)
- Add the required bits for MD atomic write support for raid0/1/10
- Correct return value for unknown opcode in ublk
- Fix deadlock with zone revalidation
- Fix for the io priority request vs bio cleanups
- Use the correct unsigned int type for various limit helpers
- Fix for a race in loop
- Cleanup blk_rq_prep_clone() to prevent uninit-value warning and make
it easier for actual humans to read
- Fix potential UAF when iterating tags
- A few fixes for bfq-iosched UAF issues
- Fix for brd discard not decrementing the allocated page count
- Various little fixes and cleanups
* tag 'block-6.13-20242901' of git://git.kernel.dk/linux: (36 commits)
brd: decrease the number of allocated pages which discarded
block, bfq: fix bfqq uaf in bfq_limit_depth()
block: Don't allow an atomic write be truncated in blkdev_write_iter()
mq-deadline: don't call req_get_ioprio from the I/O completion handler
block: Prevent potential deadlock in blk_revalidate_disk_zones()
block: Remove extra part pointer NULLify in blk_rq_init()
nvme: tuning pr code by using defined structs and macros
nvme: introduce change ptpl and iekey definition
block: return bool from get_disk_ro and bdev_read_only
block: remove a duplicate definition for bdev_read_only
block: return bool from blk_rq_aligned
block: return unsigned int from blk_lim_dma_alignment_and_pad
block: return unsigned int from queue_dma_alignment
block: return unsigned int from bdev_io_opt
block: req->bio is always set in the merge code
block: don't bother checking the data direction for merges
block: blk-mq: fix uninit-value in blk_rq_prep_clone and refactor
Revert "block, bfq: merge bfq_release_process_ref() into bfq_put_cooperator()"
md/raid10: Atomic write support
md/raid1: Atomic write support
...
|
|
Set BLK_FEAT_ATOMIC_WRITES_STACKED to enable atomic writes.
For an attempt to atomic write to a region which has bad blocks, error
the write as we just cannot do this. It is unlikely to find devices which
support atomic writes and bad blocks.
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20241118105018.1870052-6-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull block updates from Jens Axboe:
- NVMe updates via Keith:
- Use uring_cmd helper (Pavel)
- Host Memory Buffer allocation enhancements (Christoph)
- Target persistent reservation support (Guixin)
- Persistent reservation tracing (Guixen)
- NVMe 2.1 specification support (Keith)
- Rotational Meta Support (Matias, Wang, Keith)
- Volatile cache detection enhancment (Guixen)
- MD updates via Song:
- Maintainers update
- raid5 sync IO fix
- Enhance handling of faulty and blocked devices
- raid5-ppl atomic improvement
- md-bitmap fix
- Support for manually defining embedded partition tables
- Zone append fixes and cleanups
- Stop sending the queued requests in the plug list to the driver
->queue_rqs() handle in reverse order.
- Zoned write plug cleanups
- Cleanups disk stats tracking and add support for disk stats for
passthrough IO
- Add preparatory support for file system atomic writes
- Add lockdep support for queue freezing. Already found a bunch of
issues, and some fixes for that are in here. More will be coming.
- Fix race between queue stopping/quiescing and IO queueing
- ublk recovery improvements
- Fix ublk mmap for 64k pages
- Various fixes and cleanups
* tag 'for-6.13/block-20241118' of git://git.kernel.dk/linux: (118 commits)
MAINTAINERS: Update git tree for mdraid subsystem
block: make struct rq_list available for !CONFIG_BLOCK
block/genhd: use seq_put_decimal_ull for diskstats decimal values
block: don't reorder requests in blk_mq_add_to_batch
block: don't reorder requests in blk_add_rq_to_plug
block: add a rq_list type
block: remove rq_list_move
virtio_blk: reverse request order in virtio_queue_rqs
nvme-pci: reverse request order in nvme_queue_rqs
btrfs: validate queue limits
block: export blk_validate_limits
nvmet: add tracing of reservation commands
nvme: parse reservation commands's action and rtype to string
nvmet: report ns's vwc not present
md/raid5: Increase r5conf.cache_name size
block: remove the ioprio field from struct request
block: remove the write_hint field from struct request
nvme: check ns's volatile write cache not present
nvme: add rotational support
nvme: use command set independent id ns if available
...
|
|
Add proper bio_split() error handling. For any error, call
raid_end_bio_io() and return. Except for discard, where we end the bio
directly.
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20241111112150.3756529-7-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Faulty rdev should never be accessed anymore, hence there is no point to
wait for bad block to be acknowledged in this case while handling write
request.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Tested-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
Link: https://lore.kernel.org/r/20241031033114.3845582-7-yukuai1@huaweicloud.com
Signed-off-by: Song Liu <song@kernel.org>
|
|
In raid10_run() if raid10_set_queue_limits() succeed, the return value
is set to zero, and if following procedures failed raid10_run() will
return zero while mddev->private is still NULL, causing null ptr
dereference in raid10_size().
Fix the problem by only overwrite the return value if
raid10_set_queue_limits() failed.
Fixes: 3d8466ba68d4 ("md/raid10: use the atomic queue limit update APIs")
Cc: stable@vger.kernel.org
Reported-and-tested-by: ValdikSS <iam@valdikss.org.ru>
Closes: https://lore.kernel.org/all/0dd96820-fe52-4841-bc58-dbf14d6bfcc8@valdikss.org.ru/
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20241009014914.1682037-1-yukuai1@huaweicloud.com
Signed-off-by: Song Liu <song@kernel.org>
|
|
So that the implementation won't be exposed, and it'll be possible
to invent a new bitmap by replacing bitmap_operations.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20240826074452.1490072-36-yukuai1@huaweicloud.com
Signed-off-by: Song Liu <song@kernel.org>
|
|
And move the condition "if (mddev->bitmap)" into md_bitmap_resize() as
well, on the one hand make code cleaner, on the other hand try not to
access bitmap directly.
Since we are here, also change the parameter 'init' from int to bool.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20240826074452.1490072-35-yukuai1@huaweicloud.com
Signed-off-by: Song Liu <song@kernel.org>
|
|
Add a parameter 'bool sync' to distinguish them, and
md_bitmap_unplug_async() won't be exported anymore, hence
bitmap_operations only need one op to cover them.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20240826074452.1490072-32-yukuai1@huaweicloud.com
Signed-off-by: Song Liu <song@kernel.org>
|
|
So that the implementation won't be exposed, and it'll be possible
to invent a new bitmap by replacing bitmap_operations.
Also change the parameter from bitmap to mddev, to avoid access
bitmap outside md-bitmap.c as much as possible.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20240826074452.1490072-30-yukuai1@huaweicloud.com
Signed-off-by: Song Liu <song@kernel.org>
|
