| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mike Snitzer:
- The largest change for this cycle is the DM zoned target's metadata
version 2 feature that adds support for pairing regular block devices
with a zoned device to ease the performance impact associated with
finite random zones of zoned device.
The changes came in three batches: the first prepared for and then
added the ability to pair a single regular block device, the second
was a batch of fixes to improve zoned's reclaim heuristic, and the
third removed the limitation of only adding a single additional
regular block device to allow many devices.
Testing has shown linear scaling as more devices are added.
- Add new emulated block size (ebs) target that emulates a smaller
logical_block_size than a block device supports
The primary use-case is to emulate "512e" devices that have 512 byte
logical_block_size and 4KB physical_block_size. This is useful to
some legacy applications that otherwise wouldn't be able to be used
on 4K devices because they depend on issuing IO in 512 byte
granularity.
- Add discard interfaces to DM bufio. First consumer of the interface
is the dm-ebs target that makes heavy use of dm-bufio.
- Fix DM crypt's block queue_limits stacking to not truncate
logic_block_size.
- Add Documentation for DM integrity's status line.
- Switch DMDEBUG from a compile time config option to instead use
dynamic debug via pr_debug.
- Fix DM multipath target's hueristic for how it manages
"queue_if_no_path" state internally.
DM multipath now avoids disabling "queue_if_no_path" unless it is
actually needed (e.g. in response to configure timeout or explicit
"fail_if_no_path" message).
This fixes reports of spurious -EIO being reported back to userspace
application during fault tolerance testing with an NVMe backend.
Added various dynamic DMDEBUG messages to assist with debugging
queue_if_no_path in the future.
- Add a new DM multipath "Historical Service Time" Path Selector.
- Fix DM multipath's dm_blk_ioctl() to switch paths on IO error.
- Improve DM writecache target performance by using explicit cache
flushing for target's single-threaded usecase and a small cleanup to
remove unnecessary test in persistent_memory_claim.
- Other small cleanups in DM core, dm-persistent-data, and DM
integrity.
* tag 'for-5.8/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (62 commits)
dm crypt: avoid truncating the logical block size
dm mpath: add DM device name to Failing/Reinstating path log messages
dm mpath: enhance queue_if_no_path debugging
dm mpath: restrict queue_if_no_path state machine
dm mpath: simplify __must_push_back
dm zoned: check superblock location
dm zoned: prefer full zones for reclaim
dm zoned: select reclaim zone based on device index
dm zoned: allocate zone by device index
dm zoned: support arbitrary number of devices
dm zoned: move random and sequential zones into struct dmz_dev
dm zoned: per-device reclaim
dm zoned: add metadata pointer to struct dmz_dev
dm zoned: add device pointer to struct dm_zone
dm zoned: allocate temporary superblock for tertiary devices
dm zoned: convert to xarray
dm zoned: add a 'reserved' zone flag
dm zoned: improve logging messages for reclaim
dm zoned: avoid unnecessary device recalulation for secondary superblock
dm zoned: add debugging message for reading superblocks
...
|
|
When specifying several devices the superblock location must be
checked to ensure the devices are specified in the correct order.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Prefer full zones when selecting the next zone for reclaim.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
per-device reclaim should select zones on that device only.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
When allocating a zone, pass in an indicator on which device the zone
should be allocated; this increases performance for a multi-device
setup because reclaim will now allocate zones on the device for which
reclaim is running.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Remove the hard-coded limit of two devices and support an unlimited
number of additional zoned devices.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Random and sequential zones should be part of the respective
device structure to make arbitration between devices possible.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Add a metadata pointer within struct dmz_dev and use it as argument
for blkdev_report_zones() instead of the metadata itself.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Add a pointer, to the containing device, within struct dm_zone and
kill dmz_zone_to_dev().
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Checking the tertiary superblock just consists of validating UUIDs,
crcs, and the generation number; it doesn't have contents which would
be required during the actual operation.
So allocate a temporary superblock when checking tertiary devices to
avoid having to store it together with the 'real' superblocks.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
The zones array is getting really large, and large arrays tend to
wreak havoc with the CPU caches. So convert it to xarray to become
more cache friendly.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com> # fix leak in dmz_insert
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Instead of counting the number of reserved zones in dmz_free_zone(),
mark the zone as 'reserved' during allocation and simplify
dmz_free_zone().
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
The secondary superblock must reside on the same device as the primary
superblock, so there is no need to re-calculate the device.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Remove a leftover hunk to switch from random zones to sequential
zones when selecting a reclaim zone; the logic has moved into the
caller and this hunk is now pointless.
Fixes: 34f5affd04c4 ("dm zoned: separate random and cache zones")
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
The argument isn't used by any caller, and drivers don't fill out
bi_sector for flush requests either.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When dmz_get_chunk_mapping() selects a zone which is under reclaim
we should terminate the reclaim copy process. Since we're changing
the zone itself, reclaim needs to run afterwards again anyway.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
When the system is idle we should be starting reclaiming
random zones, too.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Instead of lumping emulated zones together with random zones we
should be handling them as separate 'cache' zones. This improves
code readability and allows an easier implementation of different
cache policies.
Also add additional allocation flags, to separate the type (cache,
random, or sequential) from the purpose (eg reclaim).
Also switch the allocation policy to not use random zones as buffer
zones if cache zones are present. This avoids a performance drop when
all cache zones are used.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
The only case where dmz_get_zone_for_reclaim() cannot return a zone is
if the respective lists are empty. So we should just return a simple
NULL value here as we really don't have an error code which would make
sense.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Implement handling for metadata version 2. The new metadata adds a
label and UUID for the device mapper device, and additional UUID for
the underlying block devices.
It also allows for an additional regular drive to be used for
emulating random access zones. The emulated zones will be placed
logically in front of the zones from the zoned block device, causing
the superblocks and metadata to be stored on that device.
The first zone of the original zoned device will be used to hold
another, tertiary copy of the metadata; this copy carries a generation
number of 0 and is never updated; it's just used for identification.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Bob Liu <bob.liu@oracle.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
When looking up zones in dmz_alloc_zone() we need to ignore
metadata zones so as not to accidentally overwrite metadata.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Bob Liu <bob.liu@oracle.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
dm-zoned is becoming quite chatty during startup; reduce the noise
by moving some information to 'debug' level.
Suggested-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Use the metadata label for logging and not the underlying
device.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Bob Liu <bob.liu@oracle.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Use accessors to retrieve the device pointer in preparation
for adding an additional block device.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Bob Liu <bob.liu@oracle.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Introduce accessors dmz_dev_is_dying() and dmz_check_dev() to
avoid having to reference the devices directly.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Bob Liu <bob.liu@oracle.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Introduce dmz_metadata_label() to format the device-mapper device
name and use it instead of the device name of the underlying device.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Bob Liu <bob.liu@oracle.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Move fields from the device structure into the metadata structure
and provide accessor functions.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Bob Liu <bob.liu@oracle.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Store the device together with the superblock so that
we don't have to recur to the metadata to find it.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Bob Liu <bob.liu@oracle.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Instead of storing just the first superblock zone and calculate
the secondary relative to that we should be using an array for
holding the superblock zones.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Bob Liu <bob.liu@oracle.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Instead of calculating the zone index by the offset within the
zone array store the index within the structure itself. With that
the helper dmz_id() is pointless and can be replaced with accessing
the ->id value directly.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Bob Liu <bob.liu@oracle.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Add callback to supply information for 'dmsetup status'
and 'dmsetup table'. The output for 'dmsetup status' is
0 <size> zoned <nr_zones> zones <nr_unmap_rnd>/<nr_rnd> random <nr_unmap_seq>/<nr_seq> sequential
where <nr_unmap_rnd> is the number of unmapped (ie free) random zones,
<nr_rnd> the total number of random zones, <nr_unmap_seq> the number
of unmapped sequential zones, and <nr_seq> the total number of
sequential zones.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Bob Liu <bob.liu@oracle.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
zmd->nr_rnd_zones was increased twice by mistake. The other place it
is increased in dmz_init_zone() is the only one needed:
1131 zmd->nr_useable_zones++;
1132 if (dmz_is_rnd(zone)) {
1133 zmd->nr_rnd_zones++;
^^^
Fixes: 3b1a94c88b79 ("dm zoned: drive-managed zoned block device target")
Cc: stable@vger.kernel.org
Signed-off-by: Bob Liu <bob.liu@oracle.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
dm-zoned is observed to log failed kernel assertions and not work
correctly when operating against a device with a zone size smaller
than 128MiB (e.g. 32768 bits per 4K block). The reason is that the
bitmap size per zone is calculated as zero with such a small zone
size. Fix this problem and also make the code related to zone bitmap
management be able to handle per zone bitmaps smaller than a single
block.
A dm-zoned-tools patch is required to properly format dm-zoned devices
with zone sizes smaller than 128MiB.
Fixes: 3b1a94c88b79 ("dm zoned: drive-managed zoned block device target")
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mike Snitzer:
- Fix DM core to disallow stacking request-based DM on partitions.
- Fix DM raid target to properly resync raidset even if bitmap needed
additional pages.
- Fix DM crypt performance regression due to use of WQ_HIGHPRI for the
IO and crypt workqueues.
- Fix DM integrity metadata layout that was aligned on 128K boundary
rather than the intended 4K boundary (removes 124K of wasted space
for each metadata block).
- Improve the DM thin, cache and clone targets to use spin_lock_irq
rather than spin_lock_irqsave where possible.
- Fix DM thin single thread performance that was lost due to needless
workqueue wakeups.
- Fix DM zoned target performance that was lost due to excessive
backing device checks.
- Add ability to trigger write failure with the DM dust test target.
- Fix whitespace indentation in drivers/md/Kconfig.
- Various smalls fixes and cleanups (e.g. use struct_size, fix
uninitialized variable, variable renames, etc).
* tag 'for-5.5/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (22 commits)
Revert "dm crypt: use WQ_HIGHPRI for the IO and crypt workqueues"
dm: Fix Kconfig indentation
dm thin: wakeup worker only when deferred bios exist
dm integrity: fix excessive alignment of metadata runs
dm raid: Remove unnecessary negation of a shift in raid10_format_to_md_layout
dm zoned: reduce overhead of backing device checks
dm dust: add limited write failure mode
dm dust: change ret to r in dust_map_read and dust_map
dm dust: change result vars to r
dm cache: replace spin_lock_irqsave with spin_lock_irq
dm bio prison: replace spin_lock_irqsave with spin_lock_irq
dm thin: replace spin_lock_irqsave with spin_lock_irq
dm clone: add bucket_lock_irq/bucket_unlock_irq helpers
dm clone: replace spin_lock_irqsave with spin_lock_irq
dm writecache: handle REQ_FUA
dm writecache: fix uninitialized variable warning
dm stripe: use struct_size() in kmalloc()
dm raid: streamline rs_get_progress() and its raid_status() caller side
dm raid: simplify rs_setup_recovery call chain
dm raid: to ensure resynchronization, perform raid set grow in preresume
...
|
|
Avoid the need to allocate a potentially large array of struct blk_zone
in the block layer by switching the ->report_zones method interface to
a callback model. Now the caller simply supplies a callback that is
executed on each reported zone, and private data for it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Commit 75d66ffb48efb3 added backing device health checks and as a part
of these checks, check_events() block ops template call is invoked in
dm-zoned mapping path as well as in reclaim and flush path. Calling
check_events() with ATA or SCSI backing devices introduces a blocking
scsi_test_unit_ready() call being made in sd_check_events(). Even though
the overhead of calling scsi_test_unit_ready() is small for ATA zoned
devices, it is much larger for SCSI and it affects performance in a very
negative way.
Fix this performance regression by executing check_events() only in case
of any I/O errors. The function dmz_bdev_is_dying() is modified to call
only blk_queue_dying(), while calls to check_events() are made in a new
helper function, dmz_check_bdev().
Reported-by: zhangxiaoxu <zhangxiaoxu5@huawei.com>
Fixes: 75d66ffb48efb3 ("dm zoned: properly handle backing device failure")
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Zoned block devices (ZBC and ZAC devices) allow an explicit control
over the condition (state) of zones. The operations allowed are:
* Open a zone: Transition to open condition to indicate that a zone will
actively be written
* Close a zone: Transition to closed condition to release the drive
resources used for writing to a zone
* Finish a zone: Transition an open or closed zone to the full
condition to prevent write operations
To enable this control for in-kernel zoned block device users, define
the new request operations REQ_OP_ZONE_OPEN, REQ_OP_ZONE_CLOSE
and REQ_OP_ZONE_FINISH as well as the generic function
blkdev_zone_mgmt() for submitting these operations on a range of zones.
This results in blkdev_reset_zones() removal and replacement with this
new zone magement function. Users of blkdev_reset_zones() (f2fs and
dm-zoned) are updated accordingly.
Contains contributions from Matias Bjorling, Hans Holmberg,
Dmitry Fomichev, Keith Busch, Damien Le Moal and Christoph Hellwig.
Reviewed-by: Javier González <javier@javigon.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ajay Joshi <ajay.joshi@wdc.com>
Signed-off-by: Matias Bjorling <matias.bjorling@wdc.com>
Signed-off-by: Hans Holmberg <hans.holmberg@wdc.com>
Signed-off-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This function is supposed to return error pointers so it matches the
dmz_get_rnd_zone_for_reclaim() function. The current code could lead to
a NULL dereference in dmz_do_reclaim()
Fixes: b234c6d7a703 ("dm zoned: improve error handling in reclaim")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Signed-off-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Signed-off-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
dm-zoned is observed to lock up or livelock in case of hardware
failure or some misconfiguration of the backing zoned device.
This patch adds a new dm-zoned target function that checks the status of
the backing device. If the request queue of the backing device is found
to be in dying state or the SCSI backing device enters offline state,
the health check code sets a dm-zoned target flag prompting all further
incoming I/O to be rejected. In order to detect backing device failures
timely, this new function is called in the request mapping path, at the
beginning of every reclaim run and before performing any metadata I/O.
The proper way out of this situation is to do
dmsetup remove <dm-zoned target>
and recreate the target when the problem with the backing device
is resolved.
Fixes: 3b1a94c88b79 ("dm zoned: drive-managed zoned block device target")
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
There are several places in reclaim code where errors are not
propagated to the main function, dmz_reclaim(). This function
is responsible for unlocking zones that might be still locked
at the end of any failed reclaim iterations. As the result,
some device zones may be left permanently locked for reclaim,
degrading target's capability to reclaim zones.
This patch fixes these issues as follows -
Make sure that dmz_reclaim_buf(), dmz_reclaim_seq_data() and
dmz_reclaim_rnd_data() return error codes to the caller.
dmz_reclaim() function is renamed to dmz_do_reclaim() to avoid
clashing with "struct dmz_reclaim" and is modified to return the
error to the caller.
dmz_get_zone_for_reclaim() now returns an error instead of NULL
pointer and reclaim code checks for that error.
Error logging/debug messages are added where necessary.
Fixes: 3b1a94c88b79 ("dm zoned: drive-managed zoned block device target")
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull more device mapper updates from Mike Snitzer:
- Fix zone state management race in DM zoned target by eliminating the
unnecessary DMZ_ACTIVE state.
- A couple fixes for issues the DM snapshot target's optional discard
support added during first week of the 5.3 merge.
- Increase default size of outstanding IO that is allowed for a each
dm-kcopyd client and introduce tunable to allow user adjust.
- Update DM core to use printk ratelimiting functions rather than
duplicate them and in doing so fix an issue where DMDEBUG_LIMIT()
rate limited KERN_DEBUG messages had excessive "callbacks suppressed"
messages.
* tag 'for-5.3/dm-changes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm: use printk ratelimiting functions
dm kcopyd: Increase default sub-job size to 512KB
dm snapshot: fix oversights in optional discard support
dm zoned: fix zone state management race
|
|
dm-zoned uses the zone flag DMZ_ACTIVE to indicate that a zone of the
backend device is being actively read or written and so cannot be
reclaimed. This flag is set as long as the zone atomic reference
counter is not 0. When this atomic is decremented and reaches 0 (e.g.
on BIO completion), the active flag is cleared and set again whenever
the zone is reused and BIO issued with the atomic counter incremented.
These 2 operations (atomic inc/dec and flag set/clear) are however not
always executed atomically under the target metadata mutex lock and
this causes the warning:
WARN_ON(!test_bit(DMZ_ACTIVE, &zone->flags));
in dmz_deactivate_zone() to be displayed. This problem is regularly
triggered with xfstests generic/209, generic/300, generic/451 and
xfs/077 with XFS being used as the file system on the dm-zoned target
device. Similarly, xfstests ext4/303, ext4/304, generic/209 and
generic/300 trigger the warning with ext4 use.
This problem can be easily fixed by simply removing the DMZ_ACTIVE flag
and managing the "ACTIVE" state by directly looking at the reference
counter value. To do so, the functions dmz_activate_zone() and
dmz_deactivate_zone() are changed to inline functions respectively
calling atomic_inc() and atomic_dec(), while the dmz_is_active() macro
is changed to an inline function calling atomic_read().
Fixes: 3b1a94c88b79 ("dm zoned: drive-managed zoned block device target")
Cc: stable@vger.kernel.org
Reported-by: Masato Suzuki <masato.suzuki@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Only GFP_KERNEL and GFP_NOIO are used with blkdev_report_zones(). In
preparation of using vmalloc() for large report buffer and zone array
allocations used by this function, remove its "gfp_t gfp_mask" argument
and rely on the caller context to use memalloc_noio_save/restore() where
necessary (block layer zone revalidation and dm-zoned I/O error path).
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The function blkdev_report_zones() returns success even if no zone
information is reported (empty report). Empty zone reports can only
happen if the report start sector passed exceeds the device capacity.
The conditions for this to happen are either a bug in the caller code,
or, a change in the device that forced the low level driver to change
the device capacity to a value that is lower than the report start
sector. This situation includes a failed disk revalidation resulting in
the disk capacity being changed to 0.
If this change happens while dm-zoned is in its initialization phase
executing dmz_init_zones(), this function may enter an infinite loop
and hang the system. To avoid this, add a check to disallow empty zone
reports and bail out early. Also fix the function dmz_update_zone() to
make sure that the report for the requested zone was correctly obtained.
Fixes: 3b1a94c88b79 ("dm zoned: drive-managed zoned block device target")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Shaun Tancheff <shaun@tancheff.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
dmz_fetch_mblock() called from dmz_get_mblock() has a race since the
allocation of the new metadata block descriptor and its insertion in
the cache rbtree with the READING state is not atomic. Two different
contexts requesting the same block may end up each adding two different
descriptors of the same block to the cache.
Another problem for this function is that the BIO for processing the
block read is allocated after the metadata block descriptor is inserted
in the cache rbtree. If the BIO allocation fails, the metadata block
descriptor is freed without first being removed from the rbtree.
Fix the first problem by checking again if the requested block is not in
the cache right before inserting the newly allocated descriptor,
atomically under the mblk_lock spinlock. The second problem is fixed by
simply allocating the BIO before inserting the new block in the cache.
Finally, since dmz_fetch_mblock() also increments a block reference
counter, rename the function to dmz_get_mblock_slow(). To be symmetric
and clear, also rename dmz_lookup_mblock() to dmz_get_mblock_fast() and
increment the block reference counter directly in that function rather
than in dmz_get_mblock().
Fixes: 3b1a94c88b79 ("dm zoned: drive-managed zoned block device target")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Since the ref field of struct dmz_mblock is always used with the
spinlock of struct dmz_metadata locked, there is no need to use an
atomic_t type. Change the type of the ref field to an unsigne
integer.
Fixes: 3b1a94c88b79 ("dm zoned: drive-managed zoned block device target")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
