summaryrefslogtreecommitdiff
path: root/drivers/md/bcache
AgeCommit message (Collapse)AuthorFilesLines
2018-11-21bcache: fix miss key refill->end in writebackTang Junhui1-1/+1
commit 2d6cb6edd2c7fb4f40998895bda45006281b1ac5 upstream. refill->end record the last key of writeback, for example, at the first time, keys (1,128K) to (1,1024K) are flush to the backend device, but the end key (1,1024K) is not included, since the bellow code: if (bkey_cmp(k, refill->end) >= 0) { ret = MAP_DONE; goto out; } And in the next time when we refill writeback keybuf again, we searched key start from (1,1024K), and got a key bigger than it, so the key (1,1024K) missed. This patch modify the above code, and let the end key to be included to the writeback key buffer. Signed-off-by: Tang Junhui <tang.junhui.linux@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-09bcache: release dc->writeback_lock properly in bch_writeback_thread()Shan Hai1-1/+3
commit 3943b040f11ed0cc6d4585fd286a623ca8634547 upstream. The writeback thread would exit with a lock held when the cache device is detached via sysfs interface, fix it by releasing the held lock before exiting the while-loop. Fixes: fadd94e05c02 (bcache: quit dc->writeback_thread when BCACHE_DEV_DETACHING is set) Signed-off-by: Shan Hai <shan.hai@oracle.com> Signed-off-by: Coly Li <colyli@suse.de> Tested-by: Shenghui Wang <shhuiw@foxmail.com> Cc: stable@vger.kernel.org #4.17+ Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30bcache: quit dc->writeback_thread when BCACHE_DEV_DETACHING is setColy Li1-3/+17
[ Upstream commit fadd94e05c02afec7b70b0b14915624f1782f578 ] In patch "bcache: fix cached_dev->count usage for bch_cache_set_error()", cached_dev_get() is called when creating dc->writeback_thread, and cached_dev_put() is called when exiting dc->writeback_thread. This modification works well unless people detach the bcache device manually by 'echo 1 > /sys/block/bcache<N>/bcache/detach' Because this sysfs interface only calls bch_cached_dev_detach() which wakes up dc->writeback_thread but does not stop it. The reason is, before patch "bcache: fix cached_dev->count usage for bch_cache_set_error()", inside bch_writeback_thread(), if cache is not dirty after writeback, cached_dev_put() will be called here. And in cached_dev_make_request() when a new write request makes cache from clean to dirty, cached_dev_get() will be called there. Since we don't operate dc->count in these locations, refcount d->count cannot be dropped after cache becomes clean, and cached_dev_detach_finish() won't be called to detach bcache device. This patch fixes the issue by checking whether BCACHE_DEV_DETACHING is set inside bch_writeback_thread(). If this bit is set and cache is clean (no existing writeback_keys), break the while-loop, call cached_dev_put() and quit the writeback thread. Please note if cache is still dirty, even BCACHE_DEV_DETACHING is set the writeback thread should continue to perform writeback, this is the original design of manually detach. It is safe to do the following check without locking, let me explain why, + if (!test_bit(BCACHE_DEV_DETACHING, &dc->disk.flags) && + (!atomic_read(&dc->has_dirty) || !dc->writeback_running)) { If the kenrel thread does not sleep and continue to run due to conditions are not updated in time on the running CPU core, it just consumes more CPU cycles and has no hurt. This should-sleep-but-run is safe here. We just focus on the should-run-but-sleep condition, which means the writeback thread goes to sleep in mistake while it should continue to run. 1, First of all, no matter the writeback thread is hung or not, kthread_stop() from cached_dev_detach_finish() will wake up it and terminate by making kthread_should_stop() return true. And in normal run time, bit on index BCACHE_DEV_DETACHING is always cleared, the condition !test_bit(BCACHE_DEV_DETACHING, &dc->disk.flags) is always true and can be ignored as constant value. 2, If one of the following conditions is true, the writeback thread should go to sleep, "!atomic_read(&dc->has_dirty)" or "!dc->writeback_running)" each of them independently controls the writeback thread should sleep or not, let's analyse them one by one. 2.1 condition "!atomic_read(&dc->has_dirty)" If dc->has_dirty is set from 0 to 1 on another CPU core, bcache will call bch_writeback_queue() immediately or call bch_writeback_add() which indirectly calls bch_writeback_queue() too. In bch_writeback_queue(), wake_up_process(dc->writeback_thread) is called. It sets writeback thread's task state to TASK_RUNNING and following an implicit memory barrier, then tries to wake up the writeback thread. In writeback thread, its task state is set to TASK_INTERRUPTIBLE before doing the condition check. If other CPU core sets the TASK_RUNNING state after writeback thread setting TASK_INTERRUPTIBLE, the writeback thread will be scheduled to run very soon because its state is not TASK_INTERRUPTIBLE. If other CPU core sets the TASK_RUNNING state before writeback thread setting TASK_INTERRUPTIBLE, the implict memory barrier of wake_up_process() will make sure modification of dc->has_dirty on other CPU core is updated and observed on the CPU core of writeback thread. Therefore the condition check will correctly be false, and continue writeback code without sleeping. 2.2 condition "!dc->writeback_running)" dc->writeback_running can be changed via sysfs file, every time it is modified, a following bch_writeback_queue() is alwasy called. So the change is always observed on the CPU core of writeback thread. If dc->writeback_running is changed from 0 to 1 on other CPU core, this condition check will observe the modification and allow writeback thread to continue to run without sleeping. Now we can see, even without a locking protection, multiple conditions check is safe here, no deadlock or process hang up will happen. I compose a separte patch because that patch "bcache: fix cached_dev->count usage for bch_cache_set_error()" already gets a "Reviewed-by:" from Hannes Reinecke. Also this fix is not trivial and good for a separate patch. Signed-off-by: Coly Li <colyli@suse.de> Reviewed-by: Michael Lyle <mlyle@lyle.org> Cc: Hannes Reinecke <hare@suse.com> Cc: Huijun Tang <tang.junhui@zte.com.cn> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30bcache: fix kcrashes with fio in RAID5 backend devTang Junhui1-1/+1
[ Upstream commit 60eb34ec5526e264c2bbaea4f7512d714d791caf ] Kernel crashed when run fio in a RAID5 backend bcache device, the call trace is bellow: [ 440.012034] kernel BUG at block/blk-ioc.c:146! [ 440.012696] invalid opcode: 0000 [#1] SMP NOPTI [ 440.026537] CPU: 2 PID: 2205 Comm: md127_raid5 Not tainted 4.15.0 #8 [ 440.027441] Hardware name: HP ProLiant MicroServer Gen8, BIOS J06 07/16 /2015 [ 440.028615] RIP: 0010:put_io_context+0x8b/0x90 [ 440.029246] RSP: 0018:ffffa8c882b43af8 EFLAGS: 00010246 [ 440.029990] RAX: 0000000000000000 RBX: ffffa8c88294fca0 RCX: 0000000000 0f4240 [ 440.031006] RDX: 0000000000000004 RSI: 0000000000000286 RDI: ffffa8c882 94fca0 [ 440.032030] RBP: ffffa8c882b43b10 R08: 0000000000000003 R09: ffff949cb8 0c1700 [ 440.033206] R10: 0000000000000104 R11: 000000000000b71c R12: 00000000000 01000 [ 440.034222] R13: 0000000000000000 R14: ffff949cad84db70 R15: ffff949cb11 bd1e0 [ 440.035239] FS: 0000000000000000(0000) GS:ffff949cba280000(0000) knlGS: 0000000000000000 [ 440.060190] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 440.084967] CR2: 00007ff0493ef000 CR3: 00000002f1e0a002 CR4: 00000000001 606e0 [ 440.110498] Call Trace: [ 440.135443] bio_disassociate_task+0x1b/0x60 [ 440.160355] bio_free+0x1b/0x60 [ 440.184666] bio_put+0x23/0x30 [ 440.208272] search_free+0x23/0x40 [bcache] [ 440.231448] cached_dev_write_complete+0x31/0x70 [bcache] [ 440.254468] closure_put+0xb6/0xd0 [bcache] [ 440.277087] request_endio+0x30/0x40 [bcache] [ 440.298703] bio_endio+0xa1/0x120 [ 440.319644] handle_stripe+0x418/0x2270 [raid456] [ 440.340614] ? load_balance+0x17b/0x9c0 [ 440.360506] handle_active_stripes.isra.58+0x387/0x5a0 [raid456] [ 440.380675] ? __release_stripe+0x15/0x20 [raid456] [ 440.400132] raid5d+0x3ed/0x5d0 [raid456] [ 440.419193] ? schedule+0x36/0x80 [ 440.437932] ? schedule_timeout+0x1d2/0x2f0 [ 440.456136] md_thread+0x122/0x150 [ 440.473687] ? wait_woken+0x80/0x80 [ 440.491411] kthread+0x102/0x140 [ 440.508636] ? find_pers+0x70/0x70 [ 440.524927] ? kthread_associate_blkcg+0xa0/0xa0 [ 440.541791] ret_from_fork+0x35/0x40 [ 440.558020] Code: c2 48 00 5b 41 5c 41 5d 5d c3 48 89 c6 4c 89 e7 e8 bb c2 48 00 48 8b 3d bc 36 4b 01 48 89 de e8 7c f7 e0 ff 5b 41 5c 41 5d 5d c3 <0f> 0b 0f 1f 00 0f 1f 44 00 00 55 48 8d 47 b8 48 89 e5 41 57 41 [ 440.610020] RIP: put_io_context+0x8b/0x90 RSP: ffffa8c882b43af8 [ 440.628575] ---[ end trace a1fd79d85643a73e ]-- All the crash issue happened when a bypass IO coming, in such scenario s->iop.bio is pointed to the s->orig_bio. In search_free(), it finishes the s->orig_bio by calling bio_complete(), and after that, s->iop.bio became invalid, then kernel would crash when calling bio_put(). Maybe its upper layer's faulty, since bio should not be freed before we calling bio_put(), but we'd better calling bio_put() first before calling bio_complete() to notify upper layer ending this bio. This patch moves bio_complete() under bio_put() to avoid kernel crash. [mlyle: fixed commit subject for character limits] Reported-by: Matthias Ferdinand <bcache@mfedv.net> Tested-by: Matthias Ferdinand <bcache@mfedv.net> Signed-off-by: Tang Junhui <tang.junhui@zte.com.cn> Reviewed-by: Michael Lyle <mlyle@lyle.org> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30bcache: return attach error when no cache set existTang Junhui1-2/+3
[ Upstream commit 7f4fc93d4713394ee8f1cd44c238e046e11b4f15 ] I attach a back-end device to a cache set, and the cache set is not registered yet, this back-end device did not attach successfully, and no error returned: [root]# echo 87859280-fec6-4bcc-20df7ca8f86b > /sys/block/sde/bcache/attach [root]# In sysfs_attach(), the return value "v" is initialized to "size" in the beginning, and if no cache set exist in bch_cache_sets, the "v" value would not change any more, and return to sysfs, sysfs regard it as success since the "size" is a positive number. This patch fixes this issue by assigning "v" with "-ENOENT" in the initialization. Signed-off-by: Tang Junhui <tang.junhui@zte.com.cn> Reviewed-by: Michael Lyle <mlyle@lyle.org> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30bcache: fix for data collapse after re-attaching an attached deviceTang Junhui3-7/+11
[ Upstream commit 73ac105be390c1de42a2f21643c9778a5e002930 ] back-end device sdm has already attached a cache_set with ID f67ebe1f-f8bc-4d73-bfe5-9dc88607f119, then try to attach with another cache set, and it returns with an error: [root]# cd /sys/block/sdm/bcache [root]# echo 5ccd0a63-148e-48b8-afa2-aca9cbd6279f > attach -bash: echo: write error: Invalid argument After that, execute a command to modify the label of bcache device: [root]# echo data_disk1 > label Then we reboot the system, when the system power on, the back-end device can not attach to cache_set, a messages show in the log: Feb 5 12:05:52 ceph152 kernel: [922385.508498] bcache: bch_cached_dev_attach() couldn't find uuid for sdm in set In sysfs_attach(), dc->sb.set_uuid was assigned to the value which input through sysfs, no matter whether it is success or not in bch_cached_dev_attach(). For example, If the back-end device has already attached to an cache set, bch_cached_dev_attach() would fail, but dc->sb.set_uuid was changed. Then modify the label of bcache device, it will call bch_write_bdev_super(), which would write the dc->sb.set_uuid to the super block, so we record a wrong cache set ID in the super block, after the system reboot, the cache set couldn't find the uuid of the back-end device, so the bcache device couldn't exist and use any more. In this patch, we don't assigned cache set ID to dc->sb.set_uuid in sysfs_attach() directly, but input it into bch_cached_dev_attach(), and assigned dc->sb.set_uuid to the cache set ID after the back-end device attached to the cache set successful. Signed-off-by: Tang Junhui <tang.junhui@zte.com.cn> Reviewed-by: Michael Lyle <mlyle@lyle.org> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30bcache: fix for allocator and register thread raceTang Junhui2-4/+18
[ Upstream commit 682811b3ce1a5a4e20d700939a9042f01dbc66c4 ] After long time running of random small IO writing, I reboot the machine, and after the machine power on, I found bcache got stuck, the stack is: [root@ceph153 ~]# cat /proc/2510/task/*/stack [<ffffffffa06b2455>] closure_sync+0x25/0x90 [bcache] [<ffffffffa06b6be8>] bch_journal+0x118/0x2b0 [bcache] [<ffffffffa06b6dc7>] bch_journal_meta+0x47/0x70 [bcache] [<ffffffffa06be8f7>] bch_prio_write+0x237/0x340 [bcache] [<ffffffffa06a8018>] bch_allocator_thread+0x3c8/0x3d0 [bcache] [<ffffffff810a631f>] kthread+0xcf/0xe0 [<ffffffff8164c318>] ret_from_fork+0x58/0x90 [<ffffffffffffffff>] 0xffffffffffffffff [root@ceph153 ~]# cat /proc/2038/task/*/stack [<ffffffffa06b1abd>] __bch_btree_map_nodes+0x12d/0x150 [bcache] [<ffffffffa06b1bd1>] bch_btree_insert+0xf1/0x170 [bcache] [<ffffffffa06b637f>] bch_journal_replay+0x13f/0x230 [bcache] [<ffffffffa06c75fe>] run_cache_set+0x79a/0x7c2 [bcache] [<ffffffffa06c0cf8>] register_bcache+0xd48/0x1310 [bcache] [<ffffffff812f702f>] kobj_attr_store+0xf/0x20 [<ffffffff8125b216>] sysfs_write_file+0xc6/0x140 [<ffffffff811dfbfd>] vfs_write+0xbd/0x1e0 [<ffffffff811e069f>] SyS_write+0x7f/0xe0 [<ffffffff8164c3c9>] system_call_fastpath+0x16/0x1 The stack shows the register thread and allocator thread were getting stuck when registering cache device. I reboot the machine several times, the issue always exsit in this machine. I debug the code, and found the call trace as bellow: register_bcache() ==>run_cache_set() ==>bch_journal_replay() ==>bch_btree_insert() ==>__bch_btree_map_nodes() ==>btree_insert_fn() ==>btree_split() //node need split ==>btree_check_reserve() In btree_check_reserve(), It will check if there is enough buckets of RESERVE_BTREE type, since allocator thread did not work yet, so no buckets of RESERVE_BTREE type allocated, so the register thread waits on c->btree_cache_wait, and goes to sleep. Then the allocator thread initialized, the call trace is bellow: bch_allocator_thread() ==>bch_prio_write() ==>bch_journal_meta() ==>bch_journal() ==>journal_wait_for_write() In journal_wait_for_write(), It will check if journal is full by journal_full(), but the long time random small IO writing causes the exhaustion of journal buckets(journal.blocks_free=0), In order to release the journal buckets, the allocator calls btree_flush_write() to flush keys to btree nodes, and waits on c->journal.wait until btree nodes writing over or there has already some journal buckets space, then the allocator thread goes to sleep. but in btree_flush_write(), since bch_journal_replay() is not finished, so no btree nodes have journal (condition "if (btree_current_write(b)->journal)" never satisfied), so we got no btree node to flush, no journal bucket released, and allocator sleep all the times. Through the above analysis, we can see that: 1) Register thread wait for allocator thread to allocate buckets of RESERVE_BTREE type; 2) Alloctor thread wait for register thread to replay journal, so it can flush btree nodes and get journal bucket. then they are all got stuck by waiting for each other. Hua Rui provided a patch for me, by allocating some buckets of RESERVE_BTREE type in advance, so the register thread can get bucket when btree node splitting and no need to waiting for the allocator thread. I tested it, it has effect, and register thread run a step forward, but finally are still got stuck, the reason is only 8 bucket of RESERVE_BTREE type were allocated, and in bch_journal_replay(), after 2 btree nodes splitting, only 4 bucket of RESERVE_BTREE type left, then btree_check_reserve() is not satisfied anymore, so it goes to sleep again, and in the same time, alloctor thread did not flush enough btree nodes to release a journal bucket, so they all got stuck again. So we need to allocate more buckets of RESERVE_BTREE type in advance, but how much is enough? By experience and test, I think it should be as much as journal buckets. Then I modify the code as this patch, and test in the machine, and it works. This patch modified base on Hua Rui’s patch, and allocate more buckets of RESERVE_BTREE type in advance to avoid register thread and allocate thread going to wait for each other. [patch v2] ca->sb.njournal_buckets would be 0 in the first time after cache creation, and no journal exists, so just 8 btree buckets is OK. Signed-off-by: Hua Rui <huarui.dev@gmail.com> Signed-off-by: Tang Junhui <tang.junhui@zte.com.cn> Reviewed-by: Michael Lyle <mlyle@lyle.org> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30bcache: properly set task state in bch_writeback_thread()Coly Li2-3/+8
[ Upstream commit 99361bbf26337186f02561109c17a4c4b1a7536a ] Kernel thread routine bch_writeback_thread() has the following code block, 447 down_write(&dc->writeback_lock); 448~450 if (check conditions) { 451 up_write(&dc->writeback_lock); 452 set_current_state(TASK_INTERRUPTIBLE); 453 454 if (kthread_should_stop()) 455 return 0; 456 457 schedule(); 458 continue; 459 } If condition check is true, its task state is set to TASK_INTERRUPTIBLE and call schedule() to wait for others to wake up it. There are 2 issues in current code, 1, Task state is set to TASK_INTERRUPTIBLE after the condition checks, if another process changes the condition and call wake_up_process(dc-> writeback_thread), then at line 452 task state is set back to TASK_INTERRUPTIBLE, the writeback kernel thread will lose a chance to be waken up. 2, At line 454 if kthread_should_stop() is true, writeback kernel thread will return to kernel/kthread.c:kthread() with TASK_INTERRUPTIBLE and call do_exit(). It is not good to enter do_exit() with task state TASK_INTERRUPTIBLE, in following code path might_sleep() is called and a warning message is reported by __might_sleep(): "WARNING: do not call blocking ops when !TASK_RUNNING; state=1 set at [xxxx]". For the first issue, task state should be set before condition checks. Ineed because dc->writeback_lock is required when modifying all the conditions, calling set_current_state() inside code block where dc-> writeback_lock is hold is safe. But this is quite implicit, so I still move set_current_state() before all the condition checks. For the second issue, frankley speaking it does not hurt when kernel thread exits with TASK_INTERRUPTIBLE state, but this warning message scares users, makes them feel there might be something risky with bcache and hurt their data. Setting task state to TASK_RUNNING before returning fixes this problem. In alloc.c:allocator_wait(), there is also a similar issue, and is also fixed in this patch. Changelog: v3: merge two similar fixes into one patch v2: fix the race issue in v1 patch. v1: initial buggy fix. Signed-off-by: Coly Li <colyli@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Michael Lyle <mlyle@lyle.org> Cc: Michael Lyle <mlyle@lyle.org> Cc: Junhui Tang <tang.junhui@zte.com.cn> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13bcache: segregate flash only volume write streamsTang Junhui1-5/+14
[ Upstream commit 4eca1cb28d8b0574ca4f1f48e9331c5f852d43b9 ] In such scenario that there are some flash only volumes , and some cached devices, when many tasks request these devices in writeback mode, the write IOs may fall to the same bucket as bellow: | cached data | flash data | cached data | cached data| flash data| then after writeback of these cached devices, the bucket would be like bellow bucket: | free | flash data | free | free | flash data | So, there are many free space in this bucket, but since data of flash only volumes still exists, so this bucket cannot be reclaimable, which would cause waste of bucket space. In this patch, we segregate flash only volume write streams from cached devices, so data from flash only volumes and cached devices can store in different buckets. Compare to v1 patch, this patch do not add a additionally open bucket list, and it is try best to segregate flash only volume write streams from cached devices, sectors of flash only volumes may still be mixed with dirty sectors of cached device, but the number is very small. [mlyle: fixed commit log formatting, permissions, line endings] Signed-off-by: Tang Junhui <tang.junhui@zte.com.cn> Reviewed-by: Michael Lyle <mlyle@lyle.org> Signed-off-by: Michael Lyle <mlyle@lyle.org> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13bcache: stop writeback thread after detachingTang Junhui1-0/+6
[ Upstream commit 8d29c4426b9f8afaccf28de414fde8a722b35fdf ] Currently, when a cached device detaching from cache, writeback thread is not stopped, and writeback_rate_update work is not canceled. For example, after the following command: echo 1 >/sys/block/sdb/bcache/detach you can still see the writeback thread. Then you attach the device to the cache again, bcache will create another writeback thread, for example, after below command: echo ba0fb5cd-658a-4533-9806-6ce166d883b9 > /sys/block/sdb/bcache/attach then you will see 2 writeback threads. This patch stops writeback thread and cancels writeback_rate_update work when cached device detaching from cache. Compare with patch v1, this v2 patch moves code down into the register lock for safety in case of any future changes as Coly and Mike suggested. [edit by mlyle: commit log spelling/formatting] Signed-off-by: Tang Junhui <tang.junhui@zte.com.cn> Reviewed-by: Michael Lyle <mlyle@lyle.org> Signed-off-by: Michael Lyle <mlyle@lyle.org> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-18bcache: don't attach backing with duplicate UUIDMichael Lyle1-0/+11
commit 86755b7a96faed57f910f9e6b8061e019ac1ec08 upstream. This can happen e.g. during disk cloning. This is an incomplete fix: it does not catch duplicate UUIDs earlier when things are still unattached. It does not unregister the device. Further changes to cope better with this are planned but conflict with Coly's ongoing improvements to handling device errors. In the meantime, one can manually stop the device after this has happened. Attempts to attach a duplicate device result in: [ 136.372404] loop: module loaded [ 136.424461] bcache: register_bdev() registered backing device loop0 [ 136.424464] bcache: bch_cached_dev_attach() Tried to attach loop0 but duplicate UUID already attached My test procedure is: dd if=/dev/sdb1 of=imgfile bs=1024 count=262144 losetup -f imgfile Signed-off-by: Michael Lyle <mlyle@lyle.org> Reviewed-by: Tang Junhui <tang.junhui@zte.com.cn> Cc: <stable@vger.kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-03bcache: check return value of register_shrinkerMichael Lyle1-1/+4
[ Upstream commit 6c4ca1e36cdc1a0a7a84797804b87920ccbebf51 ] register_shrinker is now __must_check, so check it to kill a warning. Caller of bch_btree_cache_alloc in super.c appropriately checks return value so this is fully plumbed through. This V2 fixes checkpatch warnings and improves the commit description, as I was too hasty getting the previous version out. Signed-off-by: Michael Lyle <mlyle@lyle.org> Reviewed-by: Vojtech Pavlik <vojtech@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-20bcache: fix wrong cache_misses statisticstang.junhui1-1/+5
[ Upstream commit c157313791a999646901b3e3c6888514ebc36d62 ] Currently, Cache missed IOs are identified by s->cache_miss, but actually, there are many situations that missed IOs are not assigned a value for s->cache_miss in cached_dev_cache_miss(), for example, a bypassed IO (s->iop.bypass = 1), or the cache_bio allocate failed. In these situations, it will go to out_put or out_submit, and s->cache_miss is null, which leads bch_mark_cache_accounting() to treat this IO as a hit IO. [ML: applied by 3-way merge] Signed-off-by: tang.junhui <tang.junhui@zte.com.cn> Reviewed-by: Michael Lyle <mlyle@lyle.org> Reviewed-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-20bcache: explicitly destroy mutex while exitingLiang Chen1-2/+4
[ Upstream commit 330a4db89d39a6b43f36da16824eaa7a7509d34d ] mutex_destroy does nothing most of time, but it's better to call it to make the code future proof and it also has some meaning for like mutex debug. As Coly pointed out in a previous review, bcache_exit() may not be able to handle all the references properly if userspace registers cache and backing devices right before bch_debug_init runs and bch_debug_init failes later. So not exposing userspace interface until everything is ready to avoid that issue. Signed-off-by: Liang Chen <liangchen.linux@gmail.com> Reviewed-by: Michael Lyle <mlyle@lyle.org> Reviewed-by: Coly Li <colyli@suse.de> Reviewed-by: Eric Wheeler <bcache@linux.ewheeler.net> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-09bcache: recover data from backing when data is cleanRui Hua1-7/+6
commit e393aa2446150536929140739f09c6ecbcbea7f0 upstream. When we send a read request and hit the clean data in cache device, there is a situation called cache read race in bcache(see the commit in the tail of cache_look_up(), the following explaination just copy from there): The bucket we're reading from might be reused while our bio is in flight, and we could then end up reading the wrong data. We guard against this by checking (in bch_cache_read_endio()) if the pointer is stale again; if so, we treat it as an error (s->iop.error = -EINTR) and reread from the backing device (but we don't pass that error up anywhere) It should be noted that cache read race happened under normal circumstances, not the circumstance when SSD failed, it was counted and shown in /sys/fs/bcache/XXX/internal/cache_read_races. Without this patch, when we use writeback mode, we will never reread from the backing device when cache read race happened, until the whole cache device is clean, because the condition (s->recoverable && (dc && !atomic_read(&dc->has_dirty))) is false in cached_dev_read_error(). In this situation, the s->iop.error(= -EINTR) will be passed up, at last, user will receive -EINTR when it's bio end, this is not suitable, and wield to up-application. In this patch, we use s->read_dirty_data to judge whether the read request hit dirty data in cache device, it is safe to reread data from the backing device when the read request hit clean data. This can not only handle cache read race, but also recover data when failed read request from cache device. [edited by mlyle to fix up whitespace, commit log title, comment spelling] Fixes: d59b23795933 ("bcache: only permit to recovery read error when cache device is clean") Signed-off-by: Hua Rui <huarui.dev@gmail.com> Reviewed-by: Michael Lyle <mlyle@lyle.org> Reviewed-by: Coly Li <colyli@suse.de> Signed-off-by: Michael Lyle <mlyle@lyle.org> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-09bcache: only permit to recovery read error when cache device is cleanColy Li1-1/+9
commit d59b23795933678c9638fd20c942d2b4f3cd6185 upstream. When bcache does read I/Os, for example in writeback or writethrough mode, if a read request on cache device is failed, bcache will try to recovery the request by reading from cached device. If the data on cached device is not synced with cache device, then requester will get a stale data. For critical storage system like database, providing stale data from recovery may result an application level data corruption, which is unacceptible. With this patch, for a failed read request in writeback or writethrough mode, recovery a recoverable read request only happens when cache device is clean. That is to say, all data on cached device is up to update. For other cache modes in bcache, read request will never hit cached_dev_read_error(), they don't need this patch. Please note, because cache mode can be switched arbitrarily in run time, a writethrough mode might be switched from a writeback mode. Therefore checking dc->has_data in writethrough mode still makes sense. Changelog: V4: Fix parens error pointed by Michael Lyle. v3: By response from Kent Oversteet, he thinks recovering stale data is a bug to fix, and option to permit it is unnecessary. So this version the sysfs file is removed. v2: rename sysfs entry from allow_stale_data_on_failure to allow_stale_data_on_failure, and fix the confusing commit log. v1: initial patch posted. [small change to patch comment spelling by mlyle] Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Michael Lyle <mlyle@lyle.org> Reported-by: Arne Wolf <awolf@lenovo.com> Reviewed-by: Michael Lyle <mlyle@lyle.org> Cc: Kent Overstreet <kent.overstreet@gmail.com> Cc: Nix <nix@esperi.org.uk> Cc: Kai Krakow <hurikhan77@gmail.com> Cc: Eric Wheeler <bcache@lists.ewheeler.net> Cc: Junhui Tang <tang.junhui@zte.com.cn> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-05bcache: Fix building error on MIPSHuacai Chen3-3/+3
commit cf33c1ee5254c6a430bc1538232b49c3ea13e613 upstream. This patch try to fix the building error on MIPS. The reason is MIPS has already defined the PTR macro, which conflicts with the PTR macro in include/uapi/linux/bcache.h. [fixed by mlyle: corrected a line-length issue] Signed-off-by: Huacai Chen <chenhc@lemote.com> Reviewed-by: Michael Lyle <mlyle@lyle.org> Signed-off-by: Michael Lyle <mlyle@lyle.org> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-30bcache: check ca->alloc_thread initialized before wake up itColy Li1-1/+2
commit 91af8300d9c1d7c6b6a2fd754109e08d4798b8d8 upstream. In bcache code, sysfs entries are created before all resources get allocated, e.g. allocation thread of a cache set. There is posibility for NULL pointer deference if a resource is accessed but which is not initialized yet. Indeed Jorg Bornschein catches one on cache set allocation thread and gets a kernel oops. The reason for this bug is, when bch_bucket_alloc() is called during cache set registration and attaching, ca->alloc_thread is not properly allocated and initialized yet, call wake_up_process() on ca->alloc_thread triggers NULL pointer deference failure. A simple and fast fix is, before waking up ca->alloc_thread, checking whether it is allocated, and only wake up ca->alloc_thread when it is not NULL. Signed-off-by: Coly Li <colyli@suse.de> Reported-by: Jorg Bornschein <jb@capsec.org> Cc: Kent Overstreet <kent.overstreet@gmail.com> Reviewed-by: Michael Lyle <mlyle@lyle.org> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-27bcache: fix bch_hprint crash and improve outputMichael Lyle1-15/+35
commit 9276717b9e297a62d1151a43d1cd286213f68eb7 upstream. Most importantly, solve a crash where %llu was used to format signed numbers. This would cause a buffer overflow when reading sysfs writeback_rate_debug, as only 20 bytes were allocated for this and %llu writes 20 characters plus a null. Always use the units mechanism rather than having different output paths for simplicity. Also, correct problems with display output where 1.10 was a larger number than 1.09, by multiplying by 10 and then dividing by 1024 instead of dividing by 100. (Remainders of >= 1000 would print as .10). Minor changes: Always display the decimal point instead of trying to omit it based on number of digits shown. Decide what units to use based on 1000 as a threshold, not 1024 (in other words, always print at most 3 digits before the decimal point). Signed-off-by: Michael Lyle <mlyle@lyle.org> Reported-by: Dmitry Yu Okunev <dyokunev@ut.mephi.ru> Acked-by: Kent Overstreet <kent.overstreet@gmail.com> Reviewed-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-27bcache: fix for gc and write-back raceTang Junhui3-2/+10
commit 9baf30972b5568d8b5bc8b3c46a6ec5b58100463 upstream. gc and write-back get raced (see the email "bcache get stucked" I sended before): gc thread write-back thread | |bch_writeback_thread() |bch_gc_thread() | | |==>read_dirty() |==>bch_btree_gc() | |==>btree_root() //get btree root | | //node write locker | |==>bch_btree_gc_root() | | |==>read_dirty_submit() | |==>write_dirty() | |==>continue_at(cl, | | write_dirty_finish, | | system_wq); | |==>write_dirty_finish()//excute | | //in system_wq | |==>bch_btree_insert() | |==>bch_btree_map_leaf_nodes() | |==>__bch_btree_map_nodes() | |==>btree_root //try to get btree | | //root node read | | //lock | |-----stuck here |==>bch_btree_set_root() |==>bch_journal_meta() |==>bch_journal() |==>journal_try_write() |==>journal_write_unlocked() //journal_full(&c->journal) | //condition satisfied |==>continue_at(cl, journal_write, system_wq); //try to excute | //journal_write in system_wq | //but work queue is excuting | //write_dirty_finish() |==>closure_sync(); //wait journal_write execute | //over and wake up gc, |-------------stuck here |==>release root node write locker This patch alloc a separate work-queue for write-back thread to avoid such race. (Commit log re-organized by Coly Li to pass checkpatch.pl checking) Signed-off-by: Tang Junhui <tang.junhui@zte.com.cn> Acked-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-27bcache: Correct return value for sysfs attach errorsTony Asleson1-2/+2
commit 77fa100f27475d08a569b9d51c17722130f089e7 upstream. If you encounter any errors in bch_cached_dev_attach it will return a negative error code. The variable 'v' which stores the result is unsigned, thus user space sees a very large value returned for bytes written which can cause incorrect user space behavior. Utilize 1 signed variable to use throughout the function to preserve error return capability. Signed-off-by: Tony Asleson <tasleson@redhat.com> Acked-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-27bcache: correct cache_dirty_target in __update_writeback_rate()Tang Junhui2-1/+21
commit a8394090a9129b40f9d90dcb7f4a49d60c727ca6 upstream. __update_write_rate() uses a Proportion-Differentiation Controller algorithm to control writeback rate. A dirty target number is used in this PD controller to control writeback rate. A larger target number will make the writeback rate smaller, on the versus, a smaller target number will make the writeback rate larger. bcache uses the following steps to calculate the target number, 1) cache_sectors = all-buckets-of-cache-set * buckets-size 2) cache_dirty_target = cache_sectors * cached-device-writeback_percent 3) target = cache_dirty_target * (sectors-of-cached-device/sectors-of-all-cached-devices-of-this-cache-set) The calculation at step 1) for cache_sectors is incorrect, which does not consider dirty blocks occupied by flash only volume. A flash only volume can be took as a bcache device without cached device. All data sectors allocated for it are persistent on cache device and marked dirty, they are not touched by bcache writeback and garbage collection code. So data blocks of flash only volume should be ignore when calculating cache_sectors of cache set. Current code does not subtract dirty sectors of flash only volume, which results a larger target number from the above 3 steps. And in sequence the cache device's writeback rate is smaller then a correct value, writeback speed is slower on all cached devices. This patch fixes the incorrect slower writeback rate by subtracting dirty sectors of flash only volumes in __update_writeback_rate(). (Commit log composed by Coly Li to pass checkpatch.pl checking) Signed-off-by: Tang Junhui <tang.junhui@zte.com.cn> Reviewed-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-27bcache: do not subtract sectors_to_gc for bypassed IOTang Junhui1-3/+3
commit 69daf03adef5f7bc13e0ac86b4b8007df1767aab upstream. Since bypassed IOs use no bucket, so do not subtract sectors_to_gc to trigger gc thread. Signed-off-by: tang.junhui <tang.junhui@zte.com.cn> Acked-by: Coly Li <colyli@suse.de> Reviewed-by: Eric Wheeler <bcache@linux.ewheeler.net> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-27bcache: Fix leak of bdev referenceJan Kara1-0/+2
commit 4b758df21ee7081ab41448d21d60367efaa625b3 upstream. If blkdev_get_by_path() in register_bcache() fails, we try to lookup the block device using lookup_bdev() to detect which situation we are in to properly report error. However we never drop the reference returned to us from lookup_bdev(). Fix that. Signed-off-by: Jan Kara <jack@suse.cz> Acked-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-27bcache: initialize dirty stripes in flash_dev_run()Tang Junhui3-6/+7
commit 175206cf9ab63161dec74d9cd7f9992e062491f5 upstream. bcache uses a Proportion-Differentiation Controller algorithm to control writeback rate to cached devices. In the PD controller algorithm, dirty stripes of thin flash device should not be counted in, because flash only volumes never write back dirty data. Currently dirty stripe counter for thin flash device is not initialized when the thin flash device starts. Which means the following calculation in PD controller will reference an undefined dirty stripes number, and all cached devices attached to the same cache set where the thin flash device lies on may have an inaccurate writeback rate. This patch calles bch_sectors_dirty_init() in flash_dev_run(), to correctly initialize dirty stripe counter when the thin flash device starts to run. This patch also does following parameter data type change, -void bch_sectors_dirty_init(struct cached_dev *dc); +void bch_sectors_dirty_init(struct bcache_device *); to call this function conveniently in flash_dev_run(). (Commit log is composed by Coly Li) Signed-off-by: Tang Junhui <tang.junhui@zte.com.cn> Reviewed-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-23bcache: Make gc wakeup sane, remove set_task_state()Kent Overstreet5-27/+26
commit be628be09563f8f6e81929efbd7cf3f45c344416 upstream. Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-15bcache: RESERVE_PRIO is too small by one when prio_buckets() is a power of two.Kent Overstreet1-1/+1
commit acc9cf8c66c66b2cbbdb4a375537edee72be64df upstream. This patch fixes a cachedev registration-time allocation deadlock. This can deadlock on boot if your initrd auto-registeres bcache devices: Allocator thread: [ 720.727614] INFO: task bcache_allocato:3833 blocked for more than 120 seconds. [ 720.732361] [<ffffffff816eeac7>] schedule+0x37/0x90 [ 720.732963] [<ffffffffa05192b8>] bch_bucket_alloc+0x188/0x360 [bcache] [ 720.733538] [<ffffffff810e6950>] ? prepare_to_wait_event+0xf0/0xf0 [ 720.734137] [<ffffffffa05302bd>] bch_prio_write+0x19d/0x340 [bcache] [ 720.734715] [<ffffffffa05190bf>] bch_allocator_thread+0x3ff/0x470 [bcache] [ 720.735311] [<ffffffff816ee41c>] ? __schedule+0x2dc/0x950 [ 720.735884] [<ffffffffa0518cc0>] ? invalidate_buckets+0x980/0x980 [bcache] Registration thread: [ 720.710403] INFO: task bash:3531 blocked for more than 120 seconds. [ 720.715226] [<ffffffff816eeac7>] schedule+0x37/0x90 [ 720.715805] [<ffffffffa05235cd>] __bch_btree_map_nodes+0x12d/0x150 [bcache] [ 720.716409] [<ffffffffa0522d30>] ? bch_btree_insert_check_key+0x1c0/0x1c0 [bcache] [ 720.717008] [<ffffffffa05236e4>] bch_btree_insert+0xf4/0x170 [bcache] [ 720.717586] [<ffffffff810e6950>] ? prepare_to_wait_event+0xf0/0xf0 [ 720.718191] [<ffffffffa0527d9a>] bch_journal_replay+0x14a/0x290 [bcache] [ 720.718766] [<ffffffff810cc90d>] ? ttwu_do_activate.constprop.94+0x5d/0x70 [ 720.719369] [<ffffffff810cf684>] ? try_to_wake_up+0x1d4/0x350 [ 720.719968] [<ffffffffa05317d0>] run_cache_set+0x580/0x8e0 [bcache] [ 720.720553] [<ffffffffa053302e>] register_bcache+0xe2e/0x13b0 [bcache] [ 720.721153] [<ffffffff81354cef>] kobj_attr_store+0xf/0x20 [ 720.721730] [<ffffffff812a2dad>] sysfs_kf_write+0x3d/0x50 [ 720.722327] [<ffffffff812a225a>] kernfs_fop_write+0x12a/0x180 [ 720.722904] [<ffffffff81225177>] __vfs_write+0x37/0x110 [ 720.723503] [<ffffffff81228048>] ? __sb_start_write+0x58/0x110 [ 720.724100] [<ffffffff812cedb3>] ? security_file_permission+0x23/0xa0 [ 720.724675] [<ffffffff812258a9>] vfs_write+0xa9/0x1b0 [ 720.725275] [<ffffffff8102479c>] ? do_audit_syscall_entry+0x6c/0x70 [ 720.725849] [<ffffffff81226755>] SyS_write+0x55/0xd0 [ 720.726451] [<ffffffff8106a390>] ? do_page_fault+0x30/0x80 [ 720.727045] [<ffffffff816f2cae>] system_call_fastpath+0x12/0x71 The fifo code in upstream bcache can't use the last element in the buffer, which was the cause of the bug: if you asked for a power of two size, it'd give you a fifo that could hold one less than what you asked for rather than allocating a buffer twice as big. Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Tested-by: Eric Wheeler <bcache@linux.ewheeler.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-12bcache: fix cache_set_flush() NULL pointer dereference on OOMEric Wheeler1-0/+3
commit f8b11260a445169989d01df75d35af0f56178f95 upstream. When bch_cache_set_alloc() fails to kzalloc the cache_set, the asyncronous closure handling tries to dereference a cache_set that hadn't yet been allocated inside of cache_set_flush() which is called by __cache_set_unregister() during cleanup. This appears to happen only during an OOM condition on bcache_register. Signed-off-by: Eric Wheeler <bcache@linux.ewheeler.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-12bcache: fix race of writeback thread starting before complete initializationEric Wheeler1-1/+8
commit 07cc6ef8edc47f8b4fc1e276d31127a0a5863d4d upstream. The bch_writeback_thread might BUG_ON in read_dirty() if dc->sb==BDEV_STATE_DIRTY and bch_sectors_dirty_init has not yet completed its related initialization. This patch downs the dc->writeback_lock until after initialization is complete, thus preventing bch_writeback_thread from proceeding prematurely. See this thread: http://thread.gmane.org/gmane.linux.kernel.bcache.devel/3453 Signed-off-by: Eric Wheeler <bcache@linux.ewheeler.net> Tested-by: Marc MERLIN <marc@merlins.org> Signed-off-by: Jens Axboe <axboe@fb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-12bcache: cleaned up error handling around register_cache()Eric Wheeler1-12/+22
commit 9b299728ed777428b3908ac72ace5f8f84b97789 upstream. Fix null pointer dereference by changing register_cache() to return an int instead of being void. This allows it to return -ENOMEM or -ENODEV and enables upper layers to handle the OOM case without NULL pointer issues. See this thread: http://thread.gmane.org/gmane.linux.kernel.bcache.devel/3521 Fixes this error: gargamel:/sys/block/md5/bcache# echo /dev/sdh2 > /sys/fs/bcache/register bcache: register_cache() error opening sdh2: cannot allocate memory BUG: unable to handle kernel NULL pointer dereference at 00000000000009b8 IP: [<ffffffffc05a7e8d>] cache_set_flush+0x102/0x15c [bcache] PGD 120dff067 PUD 1119a3067 PMD 0 Oops: 0000 [#1] SMP Modules linked in: veth ip6table_filter ip6_tables (...) CPU: 4 PID: 3371 Comm: kworker/4:3 Not tainted 4.4.2-amd64-i915-volpreempt-20160213bc1 #3 Hardware name: System manufacturer System Product Name/P8H67-M PRO, BIOS 3904 04/27/2013 Workqueue: events cache_set_flush [bcache] task: ffff88020d5dc280 ti: ffff88020b6f8000 task.ti: ffff88020b6f8000 RIP: 0010:[<ffffffffc05a7e8d>] [<ffffffffc05a7e8d>] cache_set_flush+0x102/0x15c [bcache] Signed-off-by: Eric Wheeler <bcache@linux.ewheeler.net> Tested-by: Marc MERLIN <marc@merlins.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-04bcache: Change refill_dirty() to always scan entire disk if necessaryKent Overstreet1-7/+30
commit 627ccd20b4ad3ba836472468208e2ac4dfadbf03 upstream. Previously, it would only scan the entire disk if it was starting from the very start of the disk - i.e. if the previous scan got to the end. This was broken by refill_full_stripes(), which updates last_scanned so that refill_dirty was never triggering the searched_from_start path. But if we change refill_dirty() to always scan the entire disk if necessary, regardless of what last_scanned was, the code gets cleaner and we fix that bug too. Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-04bcache: prevent crash on changing writeback_runningStefan Bader1-1/+2
commit 8d16ce540c94c9d366eb36fc91b7154d92d6397b upstream. Added a safeguard in the shutdown case. At least while not being attached it is also possible to trigger a kernel bug by writing into writeback_running. This change adds the same check before trying to wake up the thread for that case. Signed-off-by: Stefan Bader <stefan.bader@canonical.com> Cc: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-04bcache: allows use of register in udev to avoid "device_busy" error.Gabriel de Perthuis1-2/+3
commit d7076f21629f8f329bca4a44dc408d94670f49e2 upstream. Allows to use register, not register_quiet in udev to avoid "device_busy" error. The initial patch proposed at https://lkml.org/lkml/2013/8/26/549 by Gabriel de Perthuis <g2p.code@gmail.com> does not unlock the mutex and hangs the kernel. See http://thread.gmane.org/gmane.linux.kernel.bcache.devel/2594 for the discussion. Cc: Denis Bychkov <manover@gmail.com> Cc: Kent Overstreet <kent.overstreet@gmail.com> Cc: Eric Wheeler <bcache@linux.ewheeler.net> Cc: Gabriel de Perthuis <g2p.code@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-04bcache: unregister reboot notifier if bcache fails to unregister deviceZheng Liu1-1/+3
commit 2ecf0cdb2b437402110ab57546e02abfa68a716b upstream. In bcache_init() function it forgot to unregister reboot notifier if bcache fails to unregister a block device. This commit fixes this. Signed-off-by: Zheng Liu <wenqing.lz@taobao.com> Tested-by: Joshua Schmid <jschmid@suse.com> Tested-by: Eric Wheeler <bcache@linux.ewheeler.net> Cc: Kent Overstreet <kmo@daterainc.com> Signed-off-by: Jens Axboe <axboe@fb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-04bcache: fix a leak in bch_cached_dev_run()Al Viro1-1/+4
commit 4d4d8573a8451acc9f01cbea24b7e55f04a252fe upstream. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Tested-by: Joshua Schmid <jschmid@suse.com> Tested-by: Eric Wheeler <bcache@linux.ewheeler.net> Cc: Kent Overstreet <kmo@daterainc.com> Signed-off-by: Jens Axboe <axboe@fb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-04bcache: clear BCACHE_DEV_UNLINK_DONE flag when attaching a backing deviceZheng Liu1-0/+2
commit fecaee6f20ee122ad75402c53d8278f9bb142ddc upstream. This bug can be reproduced by the following script: #!/bin/bash bcache_sysfs="/sys/fs/bcache" function clear_cache() { if [ ! -e $bcache_sysfs ]; then echo "no bcache sysfs" exit fi cset_uuid=$(ls -l $bcache_sysfs|head -n 2|tail -n 1|awk '{print $9}') sudo sh -c "echo $cset_uuid > /sys/block/sdb/sdb1/bcache/detach" sleep 5 sudo sh -c "echo $cset_uuid > /sys/block/sdb/sdb1/bcache/attach" } for ((i=0;i<10;i++)); do clear_cache done The warning messages look like below: [ 275.948611] ------------[ cut here ]------------ [ 275.963840] WARNING: at fs/sysfs/dir.c:512 sysfs_add_one+0xb8/0xd0() (Tainted: P W --------------- ) [ 275.979253] Hardware name: Tecal RH2285 [ 275.994106] sysfs: cannot create duplicate filename '/devices/pci0000:00/0000:00:09.0/0000:08:00.0/host4/target4:2:1/4:2:1:0/block/sdb/sdb1/bcache/cache' [ 276.024105] Modules linked in: bcache tcp_diag inet_diag ipmi_devintf ipmi_si ipmi_msghandler bonding 8021q garp stp llc ipv6 ext3 jbd loop sg iomemory_vsl(P) bnx2 microcode serio_raw i2c_i801 i2c_core iTCO_wdt iTCO_vendor_support i7core_edac edac_core shpchp ext4 jbd2 mbcache megaraid_sas pata_acpi ata_generic ata_piix dm_mod [last unloaded: scsi_wait_scan] [ 276.072643] Pid: 2765, comm: sh Tainted: P W --------------- 2.6.32 #1 [ 276.089315] Call Trace: [ 276.105801] [<ffffffff81070fe7>] ? warn_slowpath_common+0x87/0xc0 [ 276.122650] [<ffffffff810710d6>] ? warn_slowpath_fmt+0x46/0x50 [ 276.139361] [<ffffffff81205c08>] ? sysfs_add_one+0xb8/0xd0 [ 276.156012] [<ffffffff8120609b>] ? sysfs_do_create_link+0x12b/0x170 [ 276.172682] [<ffffffff81206113>] ? sysfs_create_link+0x13/0x20 [ 276.189282] [<ffffffffa03bda21>] ? bcache_device_link+0xc1/0x110 [bcache] [ 276.205993] [<ffffffffa03bfa08>] ? bch_cached_dev_attach+0x478/0x4f0 [bcache] [ 276.222794] [<ffffffffa03c4a17>] ? bch_cached_dev_store+0x627/0x780 [bcache] [ 276.239680] [<ffffffff8116783a>] ? alloc_pages_current+0xaa/0x110 [ 276.256594] [<ffffffff81203b15>] ? sysfs_write_file+0xe5/0x170 [ 276.273364] [<ffffffff811887b8>] ? vfs_write+0xb8/0x1a0 [ 276.290133] [<ffffffff811890b1>] ? sys_write+0x51/0x90 [ 276.306368] [<ffffffff8100c072>] ? system_call_fastpath+0x16/0x1b [ 276.322301] ---[ end trace 9f5d4fcdd0c3edfb ]--- [ 276.338241] ------------[ cut here ]------------ [ 276.354109] WARNING: at /home/wenqing.lz/bcache/bcache/super.c:720 bcache_device_link+0xdf/0x110 [bcache]() (Tainted: P W --------------- ) [ 276.386017] Hardware name: Tecal RH2285 [ 276.401430] Couldn't create device <-> cache set symlinks [ 276.401759] Modules linked in: bcache tcp_diag inet_diag ipmi_devintf ipmi_si ipmi_msghandler bonding 8021q garp stp llc ipv6 ext3 jbd loop sg iomemory_vsl(P) bnx2 microcode serio_raw i2c_i801 i2c_core iTCO_wdt iTCO_vendor_support i7core_edac edac_core shpchp ext4 jbd2 mbcache megaraid_sas pata_acpi ata_generic ata_piix dm_mod [last unloaded: scsi_wait_scan] [ 276.465477] Pid: 2765, comm: sh Tainted: P W --------------- 2.6.32 #1 [ 276.482169] Call Trace: [ 276.498610] [<ffffffff81070fe7>] ? warn_slowpath_common+0x87/0xc0 [ 276.515405] [<ffffffff810710d6>] ? warn_slowpath_fmt+0x46/0x50 [ 276.532059] [<ffffffffa03bda3f>] ? bcache_device_link+0xdf/0x110 [bcache] [ 276.548808] [<ffffffffa03bfa08>] ? bch_cached_dev_attach+0x478/0x4f0 [bcache] [ 276.565569] [<ffffffffa03c4a17>] ? bch_cached_dev_store+0x627/0x780 [bcache] [ 276.582418] [<ffffffff8116783a>] ? alloc_pages_current+0xaa/0x110 [ 276.599341] [<ffffffff81203b15>] ? sysfs_write_file+0xe5/0x170 [ 276.616142] [<ffffffff811887b8>] ? vfs_write+0xb8/0x1a0 [ 276.632607] [<ffffffff811890b1>] ? sys_write+0x51/0x90 [ 276.648671] [<ffffffff8100c072>] ? system_call_fastpath+0x16/0x1b [ 276.664756] ---[ end trace 9f5d4fcdd0c3edfc ]--- We forget to clear BCACHE_DEV_UNLINK_DONE flag in bcache_device_attach() function when we attach a backing device first time. After detaching this backing device, this flag will be true and sysfs_remove_link() isn't called in bcache_device_unlink(). Then when we attach this backing device again, sysfs_create_link() will return EEXIST error in bcache_device_link(). So the fix is trival and we clear this flag in bcache_device_link(). Signed-off-by: Zheng Liu <wenqing.lz@taobao.com> Tested-by: Joshua Schmid <jschmid@suse.com> Tested-by: Eric Wheeler <bcache@linux.ewheeler.net> Cc: Kent Overstreet <kmo@daterainc.com> Signed-off-by: Jens Axboe <axboe@fb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-04bcache: Add a cond_resched() call to gcKent Overstreet1-0/+1
commit c5f1e5adf956e3ba82d204c7c141a75da9fa449a upstream. Signed-off-by: Takashi Iwai <tiwai@suse.de> Tested-by: Eric Wheeler <bcache@linux.ewheeler.net> Cc: Kent Overstreet <kmo@daterainc.com> Signed-off-by: Jens Axboe <axboe@fb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-04bcache: fix a livelock when we cause a huge number of cache missesZheng Liu1-1/+3
commit 2ef9ccbfcb90cf84bdba320a571b18b05c41101b upstream. Subject : [PATCH v2] bcache: fix a livelock in btree lock Date : Wed, 25 Feb 2015 20:32:09 +0800 (02/25/2015 04:32:09 AM) This commit tries to fix a livelock in bcache. This livelock might happen when we causes a huge number of cache misses simultaneously. When we get a cache miss, bcache will execute the following path. ->cached_dev_make_request() ->cached_dev_read() ->cached_lookup() ->bch->btree_map_keys() ->btree_root() <------------------------ ->bch_btree_map_keys_recurse() | ->cache_lookup_fn() | ->cached_dev_cache_miss() | ->bch_btree_insert_check_key() -| [If btree->seq is not equal to seq + 1, we should return EINTR and traverse btree again.] In bch_btree_insert_check_key() function we first need to check upgrade flag (op->lock == -1), and when this flag is true we need to release read btree->lock and try to take write btree->lock. During taking and releasing this write lock, btree->seq will be monotone increased in order to prevent other threads modify this in cache miss (see btree.h:74). But if there are some cache misses caused by some requested, we could meet a livelock because btree->seq is always changed by others. Thus no one can make progress. This commit will try to take write btree->lock if it encounters a race when we traverse btree. Although it sacrifice the scalability but we can ensure that only one can modify the btree. Signed-off-by: Zheng Liu <wenqing.lz@taobao.com> Tested-by: Joshua Schmid <jschmid@suse.com> Tested-by: Eric Wheeler <bcache@linux.ewheeler.net> Cc: Joshua Schmid <jschmid@suse.com> Cc: Zhu Yanhai <zhu.yanhai@gmail.com> Cc: Kent Overstreet <kmo@daterainc.com> Signed-off-by: Jens Axboe <axboe@fb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-11-11Merge branch 'for-4.4/io-poll' of git://git.kernel.dk/linux-blockLinus Torvalds1-3/+8
Pull block IO poll support from Jens Axboe: "Various groups have been doing experimentation around IO polling for (really) fast devices. The code has been reviewed and has been sitting on the side for a few releases, but this is now good enough for coordinated benchmarking and further experimentation. Currently O_DIRECT sync read/write are supported. A framework is in the works that allows scalable stats tracking so we can auto-tune this. And we'll add libaio support as well soon. Fow now, it's an opt-in feature for test purposes" * 'for-4.4/io-poll' of git://git.kernel.dk/linux-block: direct-io: be sure to assign dio->bio_bdev for both paths directio: add block polling support NVMe: add blk polling support block: add block polling support blk-mq: return tag/queue combo in the make_request_fn handlers block: change ->make_request_fn() and users to return a queue cookie
2015-11-08Merge branch 'for-linus' of ↵Linus Torvalds1-3/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial updates from Jiri Kosina: "Trivial stuff from trivial tree that can be trivially summed up as: - treewide drop of spurious unlikely() before IS_ERR() from Viresh Kumar - cosmetic fixes (that don't really affect basic functionality of the driver) for pktcdvd and bcache, from Julia Lawall and Petr Mladek - various comment / printk fixes and updates all over the place" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: bcache: Really show state of work pending bit hwmon: applesmc: fix comment typos Kconfig: remove comment about scsi_wait_scan module class_find_device: fix reference to argument "match" debugfs: document that debugfs_remove*() accepts NULL and error values net: Drop unlikely before IS_ERR(_OR_NULL) mm: Drop unlikely before IS_ERR(_OR_NULL) fs: Drop unlikely before IS_ERR(_OR_NULL) drivers: net: Drop unlikely before IS_ERR(_OR_NULL) drivers: misc: Drop unlikely before IS_ERR(_OR_NULL) UBI: Update comments to reflect UBI_METAONLY flag pktcdvd: drop null test before destroy functions
2015-11-07block: change ->make_request_fn() and users to return a queue cookieJens Axboe1-3/+8
No functional changes in this patch, but it prepares us for returning a more useful cookie related to the IO that was queued up. Signed-off-by: Jens Axboe <axboe@fb.com> Acked-by: Christoph Hellwig <hch@lst.de> Acked-by: Keith Busch <keith.busch@intel.com>
2015-11-06bcache: Really show state of work pending bitPetr Mladek1-3/+1
WORK_STRUCT_PENDING is a mask for testing the pending bit. test_bit() expects the number of the bit and we need to use WORK_STRUCT_PENDING_BIT there. Also work_data_bits() is defined in workqueues.h now. I have noticed this just by chance when looking how WORK_STRUCT_PENDING_BIT is used. The change is compile tested. Signed-off-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-08-13bcache: remove driver private bio splitting codeKent Overstreet7-162/+18
The bcache driver has always accepted arbitrarily large bios and split them internally. Now that every driver must accept arbitrarily large bios this code isn't nessecary anymore. Cc: linux-bcache@vger.kernel.org Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> [dpark: add more description in commit message] Signed-off-by: Dongsu Park <dpark@posteo.net> Signed-off-by: Ming Lin <ming.l@ssi.samsung.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-07-29block: add a bi_error field to struct bioChristoph Hellwig8-43/+44
Currently we have two different ways to signal an I/O error on a BIO: (1) by clearing the BIO_UPTODATE flag (2) by returning a Linux errno value to the bi_end_io callback The first one has the drawback of only communicating a single possible error (-EIO), and the second one has the drawback of not beeing persistent when bios are queued up, and are not passed along from child to parent bio in the ever more popular chaining scenario. Having both mechanisms available has the additional drawback of utterly confusing driver authors and introducing bugs where various I/O submitters only deal with one of them, and the others have to add boilerplate code to deal with both kinds of error returns. So add a new bi_error field to store an errno value directly in struct bio and remove the existing mechanisms to clean all this up. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-07-17block: have drivers use blk_queue_max_discard_sectors()Jens Axboe1-1/+1
Some drivers use it now, others just set the limits field manually. But in preparation for splitting this into a hard and soft limit, ensure that they all call the proper function for setting the hw limit for discards. Reviewed-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-07-11bcache: don't embed 'return' statements in closure macrosJens Axboe4-6/+14
This is horribly confusing, it breaks the flow of the code without it being apparent in the caller. Signed-off-by: Jens Axboe <axboe@fb.com> Acked-by: Christoph Hellwig <hch@lst.de>
2015-07-01MAINTAINERS: BCACHE: Kent Overstreet has changed email addressJoe Perches1-1/+1
Kent's email address in MAINTAINERS seems to be invalid. This was his last sign-off address, so use that if appropriate. Fix the S: status entry while there. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-07-01bcache: use kvfree() in various placesPekka Enberg2-16/+4
Use kvfree() instead of open-coding it. Signed-off-by: Pekka Enberg <penberg@kernel.org> Cc: Kent Overstreet <kmo@daterainc.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-02writeback: separate out include/linux/backing-dev-defs.hTejun Heo1-0/+1
With the planned cgroup writeback support, backing-dev related declarations will be more widely used across block and cgroup; unfortunately, including backing-dev.h from include/linux/blkdev.h makes cyclic include dependency quite likely. This patch separates out backing-dev-defs.h which only has the essential definitions and updates blkdev.h to include it. c files which need access to more backing-dev details now include backing-dev.h directly. This takes backing-dev.h off the common include dependency chain making it a lot easier to use it across block and cgroup. v2: fs/fat build failure fixed. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-05-22block: remove management of bi_remaining when restoring original bi_end_ioMike Snitzer1-1/+1
Commit c4cf5261 ("bio: skip atomic inc/dec of ->bi_remaining for non-chains") regressed all existing callers that followed this pattern: 1) saving a bio's original bi_end_io 2) wiring up an intermediate bi_end_io 3) restoring the original bi_end_io from intermediate bi_end_io 4) calling bio_endio() to execute the restored original bi_end_io The regression was due to BIO_CHAIN only ever getting set if bio_inc_remaining() is called. For the above pattern it isn't set until step 3 above (step 2 would've needed to establish BIO_CHAIN). As such the first bio_endio(), in step 2 above, never decremented __bi_remaining before calling the intermediate bi_end_io -- leaving __bi_remaining with the value 1 instead of 0. When bio_inc_remaining() occurred during step 3 it brought it to a value of 2. When the second bio_endio() was called, in step 4 above, it should've called the original bi_end_io but it didn't because there was an extra reference that wasn't dropped (due to atomic operations being optimized away since BIO_CHAIN wasn't set upfront). Fix this issue by removing the __bi_remaining management complexity for all callers that use the above pattern -- bio_chain() is the only interface that _needs_ to be concerned with __bi_remaining. For the above pattern callers just expect the bi_end_io they set to get called! Remove bio_endio_nodec() and also remove all bio_inc_remaining() calls that aren't associated with the bio_chain() interface. Also, the bio_inc_remaining() interface has been moved local to bio.c. Fixes: c4cf5261 ("bio: skip atomic inc/dec of ->bi_remaining for non-chains") Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>
generated by cgit v1.2.3 (git 2.39.0) at 2026-05-13 08:13:42 +0300