| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
deactivate
led_trigger_set() is the only caller of the deactivate() callback,
and it calls led_set_brightness(LED_OFF) anyway after deactivate().
So we can remove the call here.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/8dc929e7-8e14-4c85-aa28-9c5fe2620f52@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Commit d5e01266e7f5 ("leds: trigger: netdev: add additional specific link
speed mode") in the various changes, reworked the way to set the LINKUP
mode in commit cee4bd16c319 ("leds: trigger: netdev: Recheck
NETDEV_LED_MODE_LINKUP on dev rename") and moved it to a generic function.
This changed the logic where, in the previous implementation the dev
from the trigger event was used to check if the carrier was ok, but in
the new implementation with the generic function, the dev in
trigger_data is used instead.
This is problematic and cause a possible kernel panic due to the fact
that the dev in the trigger_data still reference the old one as the
new one (passed from the trigger event) still has to be hold and saved
in the trigger_data struct (done in the NETDEV_REGISTER case).
On calling of get_device_state(), an invalid net_dev is used and this
cause a kernel panic.
To handle this correctly, move the call to get_device_state() after the
new net_dev is correctly set in trigger_data (in the NETDEV_REGISTER
case) and correctly parse the new dev.
Fixes: d5e01266e7f5 ("leds: trigger: netdev: add additional specific link speed mode")
Cc: stable@vger.kernel.org
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20240203235413.1146-1-ansuelsmth@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
With the addition of more link speed mode to the netdev trigger, it was
pointed out that there may be a problem with bloating the attribute list
with modes that won't ever be supported by the trigger as the attached
device name doesn't support them.
To clear and address this problem, change the logic where these
additional trigger modes are listed.
Since the netdev trigger REQUIRE a device name to be set, attach to the
device name change function additional logic to parse the supported link
speed modes using ethtool APIs and show only the supported link speed
modes attribute.
Link speed attribute are refreshed on device_name set and on
NETDEV_CHANGE events.
This only apply to the link speed modes and every other mode is still
provided by default.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Marek Behún <kabel@kernel.org>
Link: https://lore.kernel.org/r/20240111160501.1774-1-ansuelsmth@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Add module alias ledtrig:netdev to enable auto-loading of the module.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/84a1bbd3-1ac7-4f37-849a-7f4d31698f76@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The current codes uses the sw_control path in set_baseline_state() when
called from netdev_trig_activate() even if we're hw-controlled. This
may result in errors when led_set_brightness() is called because we may
not have set_brightness led ops (if hw doesn't support setting a "LED"
to ON). In addition this path may schedule trigger_data->work which
doesn't make sense when being hw-controlled.
Therefore set trigger_data->hw_control = true before calling
set_device_name() from netdev_trig_activate(). In this call chain we
have to prevent set_baseline_state() from being called, because this
would call hw_control_set(). Use led_cdev->trigger_data == NULL as
indicator for being called from netdev_trig_activate().
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/d3f2859c-2673-401c-a4f7-fcaef2167991@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds
Pull LED updates from Lee Jones:
"New Drivers:
- Add support for Allwinner A100 RGB LED controller
- Add support for Maxim 5970 Dual Hot-swap controller
New Device Support:
- Add support for AW20108 to Awinic LED driver
New Functionality:
- Extend support for Net speeds to include; 2.5G, 5G and 10G
- Allow tx/rx and cts/dsr/dcd/rng TTY LEDS to be turned on and off
via sysfs if required
- Add support for hardware control in AW200xx
Fix-ups:
- Use safer methods for string handling
- Improve error handling; return proper error values, simplify,
avoid duplicates, etc
- Replace Mutex use with the Completion mechanism
- Fix include lists; alphabetise, remove unused, explicitly add used
- Use generic platform device properties
- Use/convert to new/better APIs/helpers/MACROs instead of
hand-rolling implementations
- Device Tree binding adaptions/conversions/creation
- Continue work to remove superfluous platform .remove() call-backs
- Remove superfluous/defunct code
- Trivial; whitespace, unused variables, spelling, clean-ups, etc
- Avoid unnecessary duplicate locks
Bug Fixes:
- Repair Kconfig based dependency lists
- Ensure unused dynamically allocated data is freed after use
- Fix support for brightness control
- Add missing sufficient delays during reset to ensure correct
operation
- Avoid division-by-zero issues"
* tag 'leds-next-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (45 commits)
leds: trigger: netdev: Add core support for hw not supporting fallback to LED sw control
leds: trigger: panic: Don't register panic notifier if creating the trigger failed
leds: sun50i-a100: Convert to be agnostic to property provider
leds: max5970: Add missing headers
leds: max5970: Make use of dev_err_probe()
leds: max5970: Make use of device properties
leds: max5970: Remove unused variable
leds: rgb: Drop obsolete dependency on COMPILE_TEST
leds: sun50i-a100: Avoid division-by-zero warning
leds: trigger: Remove unused function led_trigger_rename_static()
leds: qcom-lpg: Introduce a wrapper for getting driver data from a pwm chip
leds: gpio: Add kernel log if devm_fwnode_gpiod_get() fails
dt-bindings: leds: qcom,spmi-flash-led: Fix example node name
dt-bindings: leds: aw200xx: Fix led pattern and add reg constraints
dt-bindings: leds: awinic,aw200xx: Add AW20108 device
leds: aw200xx: Add support for aw20108 device
leds: aw200xx: Improve autodim calculation method
leds: aw200xx: Enable disable_locking flag in regmap config
leds: aw200xx: Add delay after software reset
dt-bindings: leds: aw200xx: Remove property "awinic,display-rows"
...
|
|
LED sw control
If hw doesn't support sw control of the LED and we switch to a mode
not supported by hw, currently we get lots of errors because neither
brigthness_set() nor brithness_set_blocking() is set.
Deal with this by not falling back to sw control, and return
-EOPNOTSUPP to the user. Note that we still store the new mode.
This is needed in case an intermediate unsupported mode is necessary
to switch from one supported mode to another.
Add a comment explaining how a driver for such hw is supposed to behave.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/3fd5184c-3641-4b0b-b59a-f489ec69a6cd@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Add 2.5G, 5G and 10G as available speeds to the netdev LED trigger.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/99e7d3304c6bba7f4863a4a80764a869855f2085.1701143925.git.daniel@makrotopia.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
When working on LED support for r8169 I got the following lockdep
warning. Easiest way to prevent this scenario seems to be to take
the RTNL lock before the trigger_data lock in set_device_name().
======================================================
WARNING: possible circular locking dependency detected
6.7.0-rc2-next-20231124+ #2 Not tainted
------------------------------------------------------
bash/383 is trying to acquire lock:
ffff888103aa1c68 (&trigger_data->lock){+.+.}-{3:3}, at: netdev_trig_notify+0xec/0x190 [ledtrig_netdev]
but task is already holding lock:
ffffffff8cddf808 (rtnl_mutex){+.+.}-{3:3}, at: rtnl_lock+0x12/0x20
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (rtnl_mutex){+.+.}-{3:3}:
__mutex_lock+0x9b/0xb50
mutex_lock_nested+0x16/0x20
rtnl_lock+0x12/0x20
set_device_name+0xa9/0x120 [ledtrig_netdev]
netdev_trig_activate+0x1a1/0x230 [ledtrig_netdev]
led_trigger_set+0x172/0x2c0
led_trigger_write+0xf1/0x140
sysfs_kf_bin_write+0x5d/0x80
kernfs_fop_write_iter+0x15d/0x210
vfs_write+0x1f0/0x510
ksys_write+0x6c/0xf0
__x64_sys_write+0x14/0x20
do_syscall_64+0x3f/0xf0
entry_SYSCALL_64_after_hwframe+0x6c/0x74
-> #0 (&trigger_data->lock){+.+.}-{3:3}:
__lock_acquire+0x1459/0x25a0
lock_acquire+0xc8/0x2d0
__mutex_lock+0x9b/0xb50
mutex_lock_nested+0x16/0x20
netdev_trig_notify+0xec/0x190 [ledtrig_netdev]
call_netdevice_register_net_notifiers+0x5a/0x100
register_netdevice_notifier+0x85/0x120
netdev_trig_activate+0x1d4/0x230 [ledtrig_netdev]
led_trigger_set+0x172/0x2c0
led_trigger_write+0xf1/0x140
sysfs_kf_bin_write+0x5d/0x80
kernfs_fop_write_iter+0x15d/0x210
vfs_write+0x1f0/0x510
ksys_write+0x6c/0xf0
__x64_sys_write+0x14/0x20
do_syscall_64+0x3f/0xf0
entry_SYSCALL_64_after_hwframe+0x6c/0x74
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(rtnl_mutex);
lock(&trigger_data->lock);
lock(rtnl_mutex);
lock(&trigger_data->lock);
*** DEADLOCK ***
8 locks held by bash/383:
#0: ffff888103ff33f0 (sb_writers#3){.+.+}-{0:0}, at: ksys_write+0x6c/0xf0
#1: ffff888103aa1e88 (&of->mutex){+.+.}-{3:3}, at: kernfs_fop_write_iter+0x114/0x210
#2: ffff8881036f1890 (kn->active#82){.+.+}-{0:0}, at: kernfs_fop_write_iter+0x11d/0x210
#3: ffff888108e2c358 (&led_cdev->led_access){+.+.}-{3:3}, at: led_trigger_write+0x30/0x140
#4: ffffffff8cdd9e10 (triggers_list_lock){++++}-{3:3}, at: led_trigger_write+0x75/0x140
#5: ffff888108e2c270 (&led_cdev->trigger_lock){++++}-{3:3}, at: led_trigger_write+0xe3/0x140
#6: ffffffff8cdde3d0 (pernet_ops_rwsem){++++}-{3:3}, at: register_netdevice_notifier+0x1c/0x120
#7: ffffffff8cddf808 (rtnl_mutex){+.+.}-{3:3}, at: rtnl_lock+0x12/0x20
stack backtrace:
CPU: 0 PID: 383 Comm: bash Not tainted 6.7.0-rc2-next-20231124+ #2
Hardware name: Default string Default string/Default string, BIOS ADLN.M6.SODIMM.ZB.CY.015 08/08/2023
Call Trace:
<TASK>
dump_stack_lvl+0x5c/0xd0
dump_stack+0x10/0x20
print_circular_bug+0x2dd/0x410
check_noncircular+0x131/0x150
__lock_acquire+0x1459/0x25a0
lock_acquire+0xc8/0x2d0
? netdev_trig_notify+0xec/0x190 [ledtrig_netdev]
__mutex_lock+0x9b/0xb50
? netdev_trig_notify+0xec/0x190 [ledtrig_netdev]
? __this_cpu_preempt_check+0x13/0x20
? netdev_trig_notify+0xec/0x190 [ledtrig_netdev]
? __cancel_work_timer+0x11c/0x1b0
? __mutex_lock+0x123/0xb50
mutex_lock_nested+0x16/0x20
? mutex_lock_nested+0x16/0x20
netdev_trig_notify+0xec/0x190 [ledtrig_netdev]
call_netdevice_register_net_notifiers+0x5a/0x100
register_netdevice_notifier+0x85/0x120
netdev_trig_activate+0x1d4/0x230 [ledtrig_netdev]
led_trigger_set+0x172/0x2c0
? preempt_count_add+0x49/0xc0
led_trigger_write+0xf1/0x140
sysfs_kf_bin_write+0x5d/0x80
kernfs_fop_write_iter+0x15d/0x210
vfs_write+0x1f0/0x510
ksys_write+0x6c/0xf0
__x64_sys_write+0x14/0x20
do_syscall_64+0x3f/0xf0
entry_SYSCALL_64_after_hwframe+0x6c/0x74
RIP: 0033:0x7f269055d034
Code: c7 00 16 00 00 00 b8 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 80 3d 35 c3 0d 00 00 74 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 48 83 ec 28 48 89 54 24 18 48
RSP: 002b:00007ffddb7ef748 EFLAGS: 00000202 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000007 RCX: 00007f269055d034
RDX: 0000000000000007 RSI: 000055bf5f4af3c0 RDI: 0000000000000001
RBP: 000055bf5f4af3c0 R08: 0000000000000073 R09: 0000000000000001
R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000000007
R13: 00007f26906325c0 R14: 00007f269062ff20 R15: 0000000000000000
</TASK>
Fixes: d5e01266e7f5 ("leds: trigger: netdev: add additional specific link speed mode")
Cc: stable@vger.kernel.org
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/fb5c8294-2a10-4bf5-8f10-3d2b77d2757e@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
GCC 13.2 complains about array subscript 17 is above array bounds of
'char[16]' with IFNAMSIZ set to 16.
The warning is correct but this scenario is impossible.
set_device_name is called by device_name_store (store sysfs entry) and
netdev_trig_activate.
device_name_store already check if size is >= of IFNAMSIZ and return
-EINVAL. (making the warning scenario impossible)
netdev_trig_activate works on already defined interface, where the name
has already been checked and should already follow the condition of
strlen() < IFNAMSIZ.
Aside from the scenario being impossible, set_device_name can be
improved to both mute the warning and make the function safer.
To make it safer, move size check from device_name_store directly to
set_device_name and prevent any out of bounds scenario.
Cc: stable@vger.kernel.org
Fixes: 28a6a2ef18ad ("leds: trigger: netdev: refactor code setting device name")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202309192035.GTJEEbem-lkp@intel.com/
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://lore.kernel.org/r/20231007131042.15032-1-ansuelsmth@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds
Pull LED updates from Lee Jones:
"Core Frameworks:
- Add new framework to support Group Multi-Color (GMC) LEDs
- Offer an 'optional' API for non-essential LEDs
- Support obtaining 'max brightness' values from Device Tree
- Provide new led_classdev member 'color' (settable via DT and SYFS)
- Stop TTY Trigger from using the old LED_ON constraints
- Statically allocate leds_class
New Drivers:
- Add support for NXP PCA995x I2C Constant Current LED Driver
New Device Support:
- Add support for Siemens Simatic IPC BX-21 to Simatic IPC
Fix-ups:
- Some dependency / Kconfig tweaking
- Move final probe() functions back over from .probe_new()
- Simplify obtaining resources (memory, device data) using unified
API helpers
- Bunch of Device Tree additions, conversions and adaptions
- Fix trivial styling issues; comments
- Ensure correct includes are present and remove some that are not
required
- Omit the use of redundant casts and if relevant replace with better
ones
- Use purpose-built APIs for various actions; sysfs_emit(),
module_led_trigger()
- Remove a bunch of superfluous locking
Bug Fixes:
- Ensure error codes are correctly propagated back up the call chain
- Fix incorrect error values from being returned (missing '-')
- Ensure get'ed resources are put'ed to prevent leaks
- Use correct class when exporting module resources
- Fixing rounding (or lack there of) issues
- Fix 'always false' LED_COLOR_ID_MULTI BUG() check"
* tag 'leds-next-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (40 commits)
leds: aw2013: Enable pull-up supply for interrupt and I2C
dt-bindings: leds: Document pull-up supply for interrupt and I2C
dt-bindings: leds: aw2013: Document interrupt
leds: uleds: Use module_misc_device macro to simplify the code
leds: trigger: netdev: Use module_led_trigger macro to simplify the code
dt-bindings: leds: Fix reference to definition of default-state
leds: turris-omnia: Drop unnecessary mutex locking
leds: turris-omnia: Use sysfs_emit() instead of sprintf()
leds: Make leds_class a static const structure
leds: Remove redundant of_match_ptr()
dt-bindings: leds: Add gpio-line-names to PCA9532 GPIO
leds: trigger: tty: Do not use LED_ON/OFF constants, use led_blink_set_oneshot instead
dt-bindings: leds: rohm,bd71828: Drop select:false
leds: Fix BUG_ON check for LED_COLOR_ID_MULTI that is always false
leds: multicolor: Use rounded division when calculating color components
leds: rgb: Add a multicolor LED driver to group monochromatic LEDs
dt-bindings: leds: Add binding for a multicolor group of LEDs
leds: class: Store the color index in struct led_classdev
leds: Provide devm_of_led_get_optional()
leds: pca995x: Fix MODULE_DEVICE_TABLE for OF
...
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
include/net/inet_sock.h
f866fbc842de ("ipv4: fix data-races around inet->inet_id")
c274af224269 ("inet: introduce inet->inet_flags")
https://lore.kernel.org/all/679ddff6-db6e-4ff6-b177-574e90d0103d@tessares.net/
Adjacent changes:
drivers/net/bonding/bond_alb.c
e74216b8def3 ("bonding: fix macvlan over alb bond support")
f11e5bd159b0 ("bonding: support balance-alb with openvswitch")
drivers/net/ethernet/broadcom/bgmac.c
d6499f0b7c7c ("net: bgmac: Return PTR_ERR() for fixed_phy_register()")
23a14488ea58 ("net: bgmac: Fix return value check for fixed_phy_register()")
drivers/net/ethernet/broadcom/genet/bcmmii.c
32bbe64a1386 ("net: bcmgenet: Fix return value check for fixed_phy_register()")
acf50d1adbf4 ("net: bcmgenet: Return PTR_ERR() for fixed_phy_register()")
net/sctp/socket.c
f866fbc842de ("ipv4: fix data-races around inet->inet_id")
b09bde5c3554 ("inet: move inet->mc_loop to inet->inet_frags")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit b655892ffd6d ("leds: trigger: netdev: expose hw_control status
via sysfs") exposed to sysfs the flag that tells whether the LED trigger
is offloaded to hardware, under the name "hw_control", since that is the
name under which this setting is called in the code.
Everywhere else in kernel when some work that is normally done in
software can be made to be done by hardware instead, we use the word
"offloading" to describe this, e.g. "LED blinking is offloaded to
hardware".
Normally renaming sysfs entries is a no-go because of backwards
compatibility. But since this patch was not yet released in a stable
kernel, I think it is still possible to rename it, if there is
consensus.
Fixes: b655892ffd6d ("leds: trigger: netdev: expose hw_control status via sysfs")
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230821121453.30203-1-kabel@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use the module_led_trigger macro to simplify the code, which is the
same as declaring with module_init() and module_exit().
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230815075944.1089298-2-lizetao1@huawei.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Ensure that the offloading of blinking is stopped when the trigger is
deactivated. Calling led_set_brightness() is documented as stopping
offload and setting the LED to a constant brightness.
Suggested-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/r/20230808210436.838995-5-andrew@lunn.ch
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When the netdev trigger is activates, it tries to determine what
device the LED blinks for, and what the current blink mode is.
The documentation for hw_control_get() says:
* Return 0 on success, a negative error number on failing parsing the
* initial mode. Error from this function is NOT FATAL as the device
* may be in a not supported initial state by the attached LED trigger.
*/
For the Marvell PHY and the Armada 370-rd board, the initial LED blink
mode is not supported by the trigger, so it returns an error. This
resulted in not getting the device the LED is blinking for. As a
result, the device is unknown and offloaded is never performed.
Change to condition to always get the device if offloading is
supported, and reduce the scope of testing for an error from
hw_control_get() to skip setting trigger internal state if there is an
error.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/r/20230808210436.838995-2-andrew@lunn.ch
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds
Pull LED updates from Lee Jones:
"New Drivers:
- Add support for Intel Cherry Trail Whiskey Cove PMIC LEDs
- Add support for Awinic AW20036/AW20054/AW20072 LEDs
New Device Support:
- Add support for PMI632 LPG to QCom LPG
- Add support for PMI8998 to QCom Flash
- Add support for MT6331, WLEDs and MT6332 to Mediatek MT6323 PMIC
New Functionality:
- Implement the LP55xx Charge Pump
- Add support for suspend / resume to Intel Cherry Trail Whiskey Cove PMIC
- Add support for breathing mode to Intel Cherry Trail Whiskey Cove PMIC
- Enable per-pin resolution Pinctrl in LEDs GPIO
Fix-ups:
- Allow thread to sleep by switching from spinlock to mutex
- Add lots of Device Tree bindings / support
- Adapt relationships / dependencies driven by Kconfig
- Switch I2C drivers from .probe_new() to .probe()
- Remove superfluous / duplicate code
- Replace strlcpy() with strscpy() for efficiency and overflow prevention
- Staticify various functions
- Trivial: Fixing coding style
- Simplify / reduce code
Bug Fixes:
- Prevent NETDEV_LED_MODE_LINKUP from being cleared on rename
- Repair race between led_set_brightness(LED_{OFF,FULL})
- Fix Oops relating to sleeping in critical sections
- Clear LED_INIT_DEFAULT_TRIGGER flag when clearing the current trigger
- Do not leak resources in error handling paths
- Fix unsigned comparison which can never be negative
- Provide missing NULL terminating entries in tables
- Fix misnaming issues"
* tag 'leds-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (53 commits)
leds: leds-mt6323: Adjust return/parameter types in wled get/set callbacks
leds: sgm3140: Add richtek,rt5033-led compatible
dt-bindings: leds: sgm3140: Document richtek,rt5033 compatible
dt-bindings: backlight: kinetic,ktz8866: Add missing type for "current-num-sinks"
dt-bindings: leds: Drop unneeded quotes
leds: Fix config reference for AW200xx driver
leds: leds-mt6323: Add support for WLEDs and MT6332
leds: leds-mt6323: Add support for MT6331 leds
leds: leds-mt6323: Open code and drop MT6323_CAL_HW_DUTY macro
leds: leds-mt6323: Drop MT6323_ prefix from macros and defines
leds: leds-mt6323: Specify registers and specs in platform data
dt-bindings: leds: leds-mt6323: Document mt6332 compatible
dt-bindings: leds: leds-mt6323: Document mt6331 compatible
leds: simatic-ipc-leds-gpio: Introduce more Kconfig switches
leds: simatic-ipc-leds-gpio: Split up into multiple drivers
leds: simatic-ipc-leds-gpio: Move two extra gpio pins into another table
leds: simatic-ipc-leds-gpio: Add terminating entries to gpio tables
leds: flash: leds-qcom-flash: Fix an unsigned comparison which can never be negative
leds: cht-wcove: Remove unneeded semicolon
leds: cht-wcove: Fix an unsigned comparison which can never be negative
...
|
|
Expose hw_control status via sysfs for the netdev trigger to give
userspace better understanding of the current state of the trigger and
the LED.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Acked-by: Lee Jones <lee@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add additional modes for specific link duplex. Use ethtool APIs to get the
current link duplex and enable the LED accordingly. Under netdev event
handler the rtnl lock is already held and is not needed to be set to
access ethtool APIs.
This is especially useful for PHY and Switch that supports LEDs hw
control for specific link duplex.
Add additional modes:
- half_duplex: Turn on LED when link is half duplex
- full_duplex: Turn on LED when link is full duplex
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Lee Jones <lee@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add additional modes for specific link speed. Use ethtool APIs to get the
current link speed and enable the LED accordingly. Under netdev event
handler the rtnl lock is already held and is not needed to be set to
access ethtool APIs.
This is especially useful for PHY and Switch that supports LEDs hw
control for specific link speed. (example scenario a PHY that have 2 LED
connected one green and one orange where the green is turned on with
1000mbps speed and orange is turned on with 10mpbs speed)
On mode set from sysfs we check if we have enabled split link speed mode
and reject enabling generic link mode to prevent wrong and redundant
configuration.
Rework logic on the set baseline state to support these new modes to
select if we need to turn on or off the LED.
Add additional modes:
- link_10: Turn on LED when link speed is 10mbps
- link_100: Turn on LED when link speed is 100mbps
- link_1000: Turn on LED when link speed is 1000mbps
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Lee Jones <lee@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The qca8k_cled_hw_control_get() function which implements ->hw_control_get
sets the appropriate bits but does not clear them. This leads to an
uninitialized variable bug. Fix this by setting mode to zero at the
start.
Fixes: e0256648c831 ("net: dsa: qca8k: implement hw_control ops")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Lee Jones <lee@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Expose netdev trigger modes to make them accessible by LED driver that
will support netdev trigger for hw control.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
On netdev trigger activation, hw control may be already active by
default. If this is the case and a device is actually provided by
hw_control_get_device(), init the already active mode and set the
bool to hw_control bool to true to reflect the already set mode in the
trigger_data.
Co-developed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The netdev which the LED should blink for is configurable in
/sys/class/led/foo/device_name. Ensure when offloading that the
configured netdev is the same as the netdev the LED is associated
with. If it is not, only perform software blinking.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add support for LED hw control for the netdev trigger.
The trigger on calling set_baseline_state to configure a new mode, will
do various check to verify if hw control can be used for the requested
mode in can_hw_control() function.
It will first check if the LED driver supports hw control for the netdev
trigger, then will use hw_control_is_supported() and finally will call
hw_control_set() to apply the requested mode.
To use such mode, interval MUST be set to the default value and net_dev
MUST be set. If one of these 2 value are not valid, hw control will
never be used and normal software fallback is used.
The default interval value is moved to a define to make sure they are
always synced.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Reject interval store with hw_control enabled. It's are currently not
supported and MUST be set to the default value with hw control enabled.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add basic check for hw control support. Check if the required API are
defined and check if the defined trigger supported in hw control for the
LED driver match netdev.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Introduce function to check if the requested mode can use hw control in
preparation for hw control support. Currently everything is handled in
software so can_hw_control will always return false.
Add knob with the new value hw_control in trigger_data struct to
set hw control possible. Useful for future implementation to implement
in set_baseline_state() the required function to set the requested mode
using LEDs hw control ops and in other function to reject set if hw
control is currently active.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Move the code into a helper, ready for it to be called at
other times. No intended behaviour change.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The call netdev_{put, hold} of dev_{put, hold} will check NULL,
so there is no need to check before using dev_{put, hold},
remove it to silence the warnings:
./drivers/leds/trigger/ledtrig-netdev.c:291:3-10: WARNING: NULL check before dev_{put, hold} functions is not needed.
./drivers/leds/trigger/ledtrig-netdev.c:401:2-9: WARNING: NULL check before dev_{put, hold} functions is not needed.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=4929
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://lore.kernel.org/r/20230511070820.52731-1-yang.lee@linux.alibaba.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Some LEDs may require to sleep while doing some operation like setting
brightness and other cleanup.
For this reason, using a spinlock will cause a sleep under spinlock
warning.
It should be safe to convert this to a sleepable lock since:
- sysfs read/write can sleep
- netdev_trig_work is a work queue and can sleep
- netdev _trig_notify can sleep
The spinlock was used when brightness didn't support sleeping, but this
changed and now it supported with brightness_set_blocking().
Convert to mutex lock to permit sleeping using brightness_set_blocking().
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230419210743.3594-6-ansuelsmth@gmail.com
|
|
Convert link tx and rx device attr to a common macro to reduce common
code and in preparation for additional attr.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230419210743.3594-5-ansuelsmth@gmail.com
|
|
Rename NETDEV trigger enum modes to a more symbolic name and add a
namespace to them.
Also add __TRIGGER_NETDEV_MAX to identify the max modes of the netdev
trigger.
This is a cleanup to drop the define and no behaviour change are
intended.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230419210743.3594-4-ansuelsmth@gmail.com
|
|
Putting NETDEV_LED_MODE_LINKUP in the same list of the netdev trigger
modes is wrong as it's used to set the link state of the device and not
to set a blink mode as it's done by NETDEV_LED_LINK, NETDEV_LED_TX and
NETDEV_LED_RX. It's also wrong to put this state in the same bitmap of the
netdev trigger mode and should be external to it.
Drop NETDEV_LED_MODE_LINKUP from mode list and convert to a simple bool
that will be true or false based on the carrier link. No functional
change intended.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230419210743.3594-3-ansuelsmth@gmail.com
|
|
Dev can be renamed also while up for supported device. We currently
wrongly clear the NETDEV_LED_MODE_LINKUP flag on NETDEV_CHANGENAME
event.
Fix this by rechecking if the carrier is ok on NETDEV_CHANGENAME and
correctly set the NETDEV_LED_MODE_LINKUP bit.
Fixes: 5f820ed52371 ("leds: trigger: netdev: fix handling on interface rename")
Cc: stable@vger.kernel.org # v5.5+
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230419210743.3594-2-ansuelsmth@gmail.com
|
|
The NETDEV_CHANGENAME code is not "unneeded" like it is stated in commit
4cb6560514fa ("leds: trigger: netdev: fix refcnt leak on interface
rename").
The event was accidentally misinterpreted equivalent to
NETDEV_UNREGISTER, but should be equivalent to NETDEV_REGISTER.
This was the case in the original code from the openwrt project.
Otherwise, you are unable to set netdev led triggers for (non-existent)
netdevices, which has to be renamed. This is the case, for example, for
ppp interfaces in openwrt.
Fixes: 06f502f57d0d ("leds: trigger: Introduce a NETDEV trigger")
Fixes: 4cb6560514fa ("leds: trigger: netdev: fix refcnt leak on interface rename")
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
|
|
If userspace doesn't end the input with a newline (which can easily
happen if the write happens from a C program that does write(fd,
iface, strlen(iface))), we may end up including garbage from a
previous, longer value in the device_name. For example
# cat device_name
# printf 'eth12' > device_name
# cat device_name
eth12
# printf 'eth3' > device_name
# cat device_name
eth32
I highly doubt anybody is relying on this behaviour, so switch to
simply copying the bytes (we've already checked that size is <
IFNAMSIZ) and unconditionally zero-terminate it; of course, we also
still have to strip a trailing newline.
This is also preparation for future patches.
Fixes: 06f502f57d0d ("leds: trigger: Introduce a NETDEV trigger")
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
|
|
Renaming a netdev-trigger-tracked interface was resulting in an
unbalanced dev_hold().
Example:
> iw phy phy0 interface add foo type __ap
> echo netdev > trigger
> echo foo > device_name
> ip link set foo name bar
> iw dev bar del
[ 237.355366] unregister_netdevice: waiting for bar to become free. Usage count = 1
[ 247.435362] unregister_netdevice: waiting for bar to become free. Usage count = 1
[ 257.545366] unregister_netdevice: waiting for bar to become free. Usage count = 1
Above problem was caused by trigger checking a dev->name which obviously
changes after renaming an interface. It meant missing all further events
including the NETDEV_UNREGISTER which is required for calling dev_put().
This change fixes that by:
1) Comparing device struct *address* for notification-filtering purposes
2) Dropping unneeded NETDEV_CHANGENAME code (no behavior change)
Fixes: 06f502f57d0d ("leds: trigger: Introduce a NETDEV trigger")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
|
|
The trigger core learned error handling for the activate callback and
can handle device attributes now. This allows simplifying the driver
considerably. Note that .deactivate() is only called when .activate()
succeeded, so the check for trigger_data being non-NULL can go away.
(It was broken before because the core didn't clear .trigger_data, so it
might have been non-NULL even if .activate() failed before.)
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
|
|
Given that activating a trigger can fail, let the callback return an
indication. This prevents to have a trigger active according to the
"trigger" sysfs attribute but not functional.
All users are changed accordingly to return 0 for now. There is no intended
change in behaviour.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
|
|
This commit introduces a NETDEV trigger for named device
activity. Available triggers are link, rx, and tx.
Signed-off-by: Ben Whitten <ben.whitten@gmail.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
|
