summaryrefslogtreecommitdiff
path: root/drivers/isdn
AgeCommit message (Collapse)AuthorFilesLines
2016-03-20isdn: Use ktime_t instead of 'struct timeval'Tina Ruchandani1-40/+29
'struct timeval' uses 32-bit representation for seconds which will overflow in year 2038 and beyond. mISDN/clock.c needs to compute and store elapsed time in intervals of 125 microseconds. This patch replaces the usage of 'struct timeval' with 64-bit ktime_t which is y2038 safe. The patch also replaces do_gettimeofday() (wall-clock time) with ktime_get() (monotonic time) since we only care about elapsed time here. Signed-off-by: Tina Ruchandani <ruchandani.tina@gmail.com> Suggested-by: Arnd Bergmnann <arnd@arndb.de> Suggested-by: David Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds4-48/+29
Pull networking updates from David Miller: "Highlights: 1) Support more Realtek wireless chips, from Jes Sorenson. 2) New BPF types for per-cpu hash and arrap maps, from Alexei Starovoitov. 3) Make several TCP sysctls per-namespace, from Nikolay Borisov. 4) Allow the use of SO_REUSEPORT in order to do per-thread processing of incoming TCP/UDP connections. The muxing can be done using a BPF program which hashes the incoming packet. From Craig Gallek. 5) Add a multiplexer for TCP streams, to provide a messaged based interface. BPF programs can be used to determine the message boundaries. From Tom Herbert. 6) Add 802.1AE MACSEC support, from Sabrina Dubroca. 7) Avoid factorial complexity when taking down an inetdev interface with lots of configured addresses. We were doing things like traversing the entire address less for each address removed, and flushing the entire netfilter conntrack table for every address as well. 8) Add and use SKB bulk free infrastructure, from Jesper Brouer. 9) Allow offloading u32 classifiers to hardware, and implement for ixgbe, from John Fastabend. 10) Allow configuring IRQ coalescing parameters on a per-queue basis, from Kan Liang. 11) Extend ethtool so that larger link mode masks can be supported. From David Decotigny. 12) Introduce devlink, which can be used to configure port link types (ethernet vs Infiniband, etc.), port splitting, and switch device level attributes as a whole. From Jiri Pirko. 13) Hardware offload support for flower classifiers, from Amir Vadai. 14) Add "Local Checksum Offload". Basically, for a tunneled packet the checksum of the outer header is 'constant' (because with the checksum field filled into the inner protocol header, the payload of the outer frame checksums to 'zero'), and we can take advantage of that in various ways. From Edward Cree" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1548 commits) bonding: fix bond_get_stats() net: bcmgenet: fix dma api length mismatch net/mlx4_core: Fix backward compatibility on VFs phy: mdio-thunder: Fix some Kconfig typos lan78xx: add ndo_get_stats64 lan78xx: handle statistics counter rollover RDS: TCP: Remove unused constant RDS: TCP: Add sysctl tunables for sndbuf/rcvbuf on rds-tcp socket net: smc911x: convert pxa dma to dmaengine team: remove duplicate set of flag IFF_MULTICAST bonding: remove duplicate set of flag IFF_MULTICAST net: fix a comment typo ethernet: micrel: fix some error codes ip_tunnels, bpf: define IP_TUNNEL_OPTS_MAX and use it bpf, dst: add and use dst_tclassid helper bpf: make skb->tc_classid also readable net: mvneta: bm: clarify dependencies cls_bpf: reset class and reuse major in da ldmvsw: Checkpatch sunvnet.c and sunvnet_common.c ldmvsw: Add ldmvsw.c driver code ...
2016-03-18Merge tag 'staging-4.6-rc1' of ↵Linus Torvalds27-9055/+0
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging driver updates from Greg KH: "Here is the big staging driver pull request for 4.6-rc1. Lots of little things here, over 1600 patches or so. Notable is all of the good Lustre work happening, those developers have finally woken up and are cleaning up their code greatly. The Outreachy intern application process is also happening, which brought in another 400 or so patches. Full details are in the very long shortlog. All of these have been in linux-next with no reported issues" * tag 'staging-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1673 commits) staging: lustre: fix aligments in lnet selftest staging: lustre: report minimum of two buffers for LNet selftest load test staging: lustre: test for proper errno code in lstcon_rpc_trans_abort staging: lustre: filter remaining extra spacing for lnet selftest staging: lustre: remove extra spacing when setting variable for lnet selftest staging: lustre: remove extra spacing of variable declartions for lnet selftest staging: lustre: fix spacing issues checkpatch reported in lnet selftest staging: lustre: remove returns in void function for lnet selftest staging: lustre: fix bogus lst errors for lnet selftest staging: netlogic: Replacing pr_err with dev_err after the call to devm_kzalloc staging: mt29f_spinand: Replacing pr_info with dev_info after the call to devm_kzalloc staging: android: ion: fix up file mode staging: ion: debugfs invalid gfp mask staging: rts5208: Replace pci_enable_device with pcim_enable_device Staging: ieee80211: Place constant on right side of the test. staging: speakup: Replace del_timer with del_timer_sync staging: lowmemorykiller: fix 2 checks that checkpatch complained staging: mt29f_spinand: Drop void pointer cast staging: rdma: hfi1: file_ops: Replace ALIGN with PAGE_ALIGN staging: rdma: hfi1: driver: Replace IS_ALIGNED with PAGE_ALIGNED ...
2016-03-17Merge tag 'tty-4.6-rc1' of ↵Linus Torvalds1-6/+6
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial updates from Greg KH: "Here's the big tty/serial driver pull request for 4.6-rc1. Lots of changes in here, Peter has been on a tear again, with lots of refactoring and bugs fixes, many thanks to the great work he has been doing. Lots of driver updates and fixes as well, full details in the shortlog. All have been in linux-next for a while with no reported issues" * tag 'tty-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (220 commits) serial: 8250: describe CONFIG_SERIAL_8250_RSA serial: samsung: optimize UART rx fifo access routine serial: pl011: add mark/space parity support serial: sa1100: make sa1100_register_uart_fns a function tty: serial: 8250: add MOXA Smartio MUE boards support serial: 8250: convert drivers to use up_to_u8250p() serial: 8250/mediatek: fix building with SERIAL_8250=m serial: 8250/ingenic: fix building with SERIAL_8250=m serial: 8250/uniphier: fix modular build Revert "drivers/tty/serial: make 8250/8250_ingenic.c explicitly non-modular" Revert "drivers/tty/serial: make 8250/8250_mtk.c explicitly non-modular" serial: mvebu-uart: initial support for Armada-3700 serial port serial: mctrl_gpio: Add missing module license serial: ifx6x60: avoid uninitialized variable use tty/serial: at91: fix bad offset for UART timeout register tty/serial: at91: restore dynamic driver binding serial: 8250: Add hardware dependency to RT288X option TTY, devpts: document pty count limiting tty: goldfish: support platform_device with id -1 drivers: tty: goldfish: Add device tree bindings ...
2016-03-14mISDN: Support DR6 indication in mISDNipac driverMaciej S. Szmigiero2-0/+3
According to figure 39 in PEB3086 data sheet, version 1.4 this indication replaces DR when layer 1 transition source state is F6. This fixes mISDN layer 1 getting stuck in F6 state in TE mode on Dialogic Diva 2.02 card (and possibly others) when NT deactivates it. Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name> Acked-by: Karsten Keil <keil@b1-systems.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-14mISDN: Order IPAC register definesMaciej S. Szmigiero1-20/+20
It looks like IPAC/ISAC chips register defines weren't in any particular order. Order them by their number to make it easier to spot holes. Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name> Acked-by: Karsten Keil <keil@b1-systems.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-06isdn: i4l: move active-isdn drivers to stagingArnd Bergmann27-9055/+0
The icn, act2000 and pcbit drivers are all for very old hardware, and it is highly unlikely that anyone is actually still using them on modern kernels, if at all. All three drivers apparently are for hardware that predates PCI being the common connector, as they are ISA-only and active PCI ISDN cards were widely available in the 1990s. Looking through the git logs, it I cannot find any indication of a patch to any of these drivers that has been tested on real hardware, only cleanups or global API changes. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Karsten Keil <isdn@linux-pingi.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-06isdn: icn: remove a #warningArnd Bergmann1-1/+1
The icn driver currently produces an unconditional #warning whenever we build it, introduced by Karsten Keil back in 2003: #warning TODO test headroom or use skb->nb to flag ACK Karsten's original commit (from BitKeeper) contains this description: - here are lot of bugs left, so ISDN is not stable yet but I think it's really time to fix it, even if it need some cycles to get it right (normally I'm only send patches if it works 100% for me). - I add some additional #warnings to address places which need fixing (I hope that some of the other ISDN developer jump in) Apparently this has not happened, and it is unlikely that it ever will, given that the driver doesn't seem to work. No substantial bug fixes other than janitorial cleanups have happened in the driver since then, and I see no indication that anyone who patched it had the hardware. We should probably either remove the driver, or remove all of i4l, but for now, this shuts up the distracting #warning by turning it into a comment. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: http://git.meleeweb.net/linux.git/commit/?id=b0deac0886b0056765afd149e9834373b38e096b Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2-9/+2
Conflicts: drivers/net/phy/bcm7xxx.c drivers/net/phy/marvell.c drivers/net/vxlan.c All three conflicts were cases of simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-19ser_gigaset: use container_of() instead of detourPaul Bolle1-8/+1
The purpose of gigaset_device_release() is to kfree() the struct ser_cardstate that contains our struct device. This is done via a bit of a detour. First we make our struct device's driver_data point to the container of our struct ser_cardstate (which is a struct cardstate). In gigaset_device_release() we then retrieve that driver_data again. And after that we finally kfree() the struct ser_cardstate that was saved in the struct cardstate. All of this can be achieved much easier by using container_of() to get from our struct device to its container, struct ser_cardstate. Do so. Note that at the time the detour was implemented commit b8b2c7d845d5 ("base/platform: assert that dev_pm_domain callbacks are called unconditionally") had just entered the tree. That commit disconnected our platform_device and our platform_driver. These were reconnected again in v4.5-rc2 through commit 25cad69f21f5 ("base/platform: Fix platform drivers with no probe callback"). And one of the consequences of that fix was that it broke the detour via driver_data. That's because it made __device_release_driver() stop being a NOP for our struct device and actually do stuff again. One of the things it now does, is setting our driver_data to NULL. That, in turn, makes it impossible for gigaset_device_release() to get to our struct cardstate. Which has the net effect of leaking a struct ser_cardstate at every call of this driver's tty close() operation. So using container_of() has the additional benefit of actually working. Reported-by: Dmitry Vyukov <dvyukov@google.com> Tested-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Acked-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-18mISDN: prevent possible NULL pointer dereferenceAnton Protopopov1-1/+1
A return value of the bchannel_get_rxbuf() function is compared with the positive ENOMEM value instead of the negative -ENOMEM value to detect a memory allocation problem. Thus, after a possible memory allocation failure the bc->bch.rx_skb will be NULL which will lead to a NULL pointer dereference. Signed-off-by: Anton Protopopov <a.s.protopopov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-18isdn: divamnt: use y2038-safe ktime_get_ts64() for trace data timestampsAlison Schofield2-28/+6
divamnt stores a start_time at module init and uses it to calculate elapsed time. The elapsed time, stored in secs and usecs, is part of the trace data the driver maintains for the DIVA Server ISDN cards. No change to the format of that time data is required. To avoid overflow on 32-bit systems use ktime_get_ts64() to return the elapsed monotonic time since system boot. This is a change from real to monotonic time. Since the driver only stores elapsed time, monotonic time is sufficient and more robust against real time clock changes. These new monotonic values can be more useful for debugging because they can be easily compared to other monotonic timestamps. Note elaspsed time values will now start at system boot time rather than module load time, so they will differ slightly from previously reported values. Remove declaration and init of previously unused time constants: start_sec, start_usec. Signed-off-by: Alison Schofield <amsfield22@gmail.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-29isdn: Remove ASYNC_CLOSINGPeter Hurley1-6/+6
The tty core no longer provides ASYNC_CLOSING. Use private flag for same purpose, which is to disable AT-emulator output (why this is necessary is not clear). Cc: Karsten Keil <isdn@linux-pingi.de> Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+1
Conflicts: drivers/net/bonding/bond_main.c drivers/net/ethernet/mellanox/mlxsw/spectrum.h drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c The bond_main.c and mellanox switch conflicts were cases of overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-08isdn: act200: fix MODULE_PARM_DESC() typoDan Carpenter1-1/+1
There is no "membase", it was "act_port" that was intended. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2-16/+14
Conflicts: drivers/net/geneve.c Here we had an overlapping change, where in 'net' the extraneous stats bump was being removed whilst in 'net-next' the final argument to udp_tunnel6_xmit_skb() was being changed. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-15ser_gigaset: remove unnecessary kfree() calls from release methodTilman Schmidt1-5/+0
device->platform_data and platform_device->resource are never used and remain NULL through their entire life. Drops the kfree() calls for them from the device release method. Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-15ser_gigaset: fix deallocation of platform device structureTilman Schmidt1-3/+7
When shutting down the device, the struct ser_cardstate must not be kfree()d immediately after the call to platform_device_unregister() since the embedded struct platform_device is still in use. Move the kfree() call to the release method instead. Signed-off-by: Tilman Schmidt <tilman@imap.cc> Fixes: 2869b23e4b95 ("drivers/isdn/gigaset: new M101 driver (v2)") Reported-by: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-15ser_gigaset: turn nonsense checks into WARN_ONAlan Cox1-5/+5
These checks do nothing useful to protect the code from races. On the other hand if the old code has been masking a real bug we would like to know about it. The check for tiocmset is kept because it is valid for a tty driver to have a NULL tiocmset method. That in itself is probably a mistake given modern coding practices - but needs fixing in the tty layer. Signed-off-by: Alan Cox <alan@linux.intel.com> Acked-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-15ser_gigaset: fix up NULL checksTilman Schmidt1-3/+3
Commit f34d7a5b7010 ("tty: The big operations rework") changed tty->driver to tty->ops but left NULL checks for tty->driver untouched. Fix. Signed-off-by: Tilman Schmidt <tilman@imap.cc> [pebolle: removed Fixes tag] Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-15mISDN: fix a loop countDan Carpenter1-4/+3
There are two issue here. 1) cnt starts as maxloop + 1 so all these loops iterate one more time than intended. 2) At the end of the loop we test for "if (maxloop && !cnt)" but for the first two loops, we end with cnt equal to -1. Changing this to a pre-op means we end with cnt set to 0. Fixes: cae86d4a4e56 ('mISDN: Add driver for Infineon ISDN chipset family') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller4-6/+6
Conflicts: drivers/net/ethernet/renesas/ravb_main.c kernel/bpf/syscall.c net/ipv4/ipmr.c All three conflicts were cases of overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-02isdn: remove spellcaster driverArnd Bergmann18-3136/+0
The 'sc' ISDN driver relies on using readl() to access ISA I/O memory. This has been deprecated and produced warnings since linux-2.3.23, disabled by default since 2.4.10 and finally removed in 2.6.5. I found this because the compiling the driver for ARM produces a warning: In file included from ../drivers/isdn/sc/includes.h:8:0, from ../drivers/isdn/sc/init.c:13: ../arch/arm/include/asm/io.h:115:21: note: expected 'const volatile void *' but argument is of type 'long unsigned int' It is pretty clear that this driver has not been used for a long time and there is no point fixing it now, so let's remove it. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-25isdn: Partially revert debug format string usage clean upChristoph Biedl4-6/+6
Commit 35a4a57 ("isdn: clean up debug format string usage") introduced a safeguard to avoid accidential format string interpolation of data when calling debugl1 or HiSax_putstatus. This did however not take into account VHiSax_putstatus (called by HiSax_putstatus) does *not* call vsprintf if the head parameter is NULL - the format string is treated as plain text then instead. As a result, the string "%s" is processed literally, and the actual information is lost. This affects the isdnlog userspace program which stopped logging information since that commit. So revert the HiSax_putstatus invocations to the previous state. Fixes: 35a4a5733b0a ("isdn: clean up debug format string usage") Cc: Kees Cook <keescook@chromium.org> Cc: Karsten Keil <isdn@linux-pingi.de> Signed-off-by: Christoph Biedl <linux-kernel.bfrz@manchmal.in-ulm.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-05Merge tag 'tty-4.4-rc1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver updates from Greg KH: "Here is the big tty and serial driver update for 4.4-rc1. Lots of serial driver updates and a few small tty core changes. Full details in the shortlog. All of these have been in linux-next for a while" * tag 'tty-4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (148 commits) tty: Use unbound workqueue for all input workers tty: Abstract tty buffer work tty: Prevent tty teardown during tty_write_message() tty: core: Use correct spinlock flavor in tiocspgrp() tty: Combine SIGTTOU/SIGTTIN handling serial: amba-pl011: fix incorrect integer size in pl011_fifo_to_tty() ttyFDC: Fix build problems due to use of module_{init,exit} tty: remove unneeded return statement serial: 8250_mid: add support for DMA engine handling from UART MMIO dmaengine: hsu: remove platform data dmaengine: hsu: introduce stubs for the exported functions dmaengine: hsu: make the UART driver in control of selecting this driver serial: fix mctrl helper functions serial: 8250_pci: Intel MID UART support to its own driver serial: fsl_lpuart: add earlycon support tty: disable unbind for old 74xx based serial/mpsc console port serial: pl011: Spelling s/clocks-names/clock-names/ n_tty: Remove reader wakeups for TTY_BREAK/TTY_PARITY chars tty: synclink, fix indentation serial: at91, fix rs485 properties ...
2015-11-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-4/+8
Minor overlapping changes in net/ipv4/ipmr.c, in 'net' we were fixing the "BH-ness" of the counter bumps whilst in 'net-next' the functions were modified to take an explicit 'net' parameter. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-03ppp, slip: Validate VJ compression slot parameters completelyBen Hutchings1-6/+4
Currently slhc_init() treats out-of-range values of rslots and tslots as equivalent to 0, except that if tslots is too large it will dereference a null pointer (CVE-2015-7799). Add a range-check at the top of the function and make it return an ERR_PTR() on error instead of NULL. Change the callers accordingly. Compile-tested only. Reported-by: 郭永刚 <guoyonggang@360.cn> References: http://article.gmane.org/gmane.comp.security.oss.general/17908 Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-03isdn_ppp: Add checks for allocation failure in isdn_ppp_open()Ben Hutchings1-0/+6
Compile-tested only. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2-46/+28
Conflicts: net/ipv6/xfrm6_output.c net/openvswitch/flow_netlink.c net/openvswitch/vport-gre.c net/openvswitch/vport-vxlan.c net/openvswitch/vport.c net/openvswitch/vport.h The openvswitch conflicts were overlapping changes. One was the egress tunnel info fix in 'net' and the other was the vport ->send() op simplification in 'net-next'. The xfrm6_output.c conflicts was also a simplification overlapping a bug fix. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-22mISDN: fix OOM condition for sending queued I-FramesKarsten Keil1-34/+20
The old code did not check the return value of skb_clone(). The extra skb_clone() is not needed at all, if using skb_realloc_headroom() instead, which gives us a private copy with enough headroom as well. We need to requeue the original skb if the call failed, because we cannot inform upper layers about the data loss. Restructure the code to minimise rollback effort if it happens. This fix kernel bug #86091 Thanks to Insu Yun <wuninsu@gmail.com> to remind me on this issue. Signed-off-by: Karsten Keil <keil@b1-systems.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-22ISDN: fix OOM condition for sending queued I-FramesKarsten Keil1-12/+8
The skb_clone() return value was not checked and the skb_realloc_headroom() usage was wrong, the old skb was not freed. It turned out, that the skb_clone is not needed at all, the skb_realloc_headroom() will create a private copy with enough headroom and the original SKB can be used for the ACK queue. We need to requeue the original skb if the call failed, since the upper layer cannot be informed about memory shortage. Thanks to Insu Yun <wuninsu@gmail.com> to remind me on this issue. Signed-off-by: Karsten Keil <keil@b1-systems.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-18tty: Remove tty_wait_until_sent_from_close()Peter Hurley1-1/+1
tty_wait_until_sent_from_close() drops the tty lock while waiting for the tty driver to finish sending previously accepted data (ie., data remaining in its write buffer and transmit fifo). tty_wait_until_sent_from_close() was added by commit a57a7bf3fc7e ("TTY: define tty_wait_until_sent_from_close") to prevent the entire tty subsystem from being unable to open new ttys while waiting for one tty to close while output drained. However, since commit 0911261d4cb6 ("tty: Don't take tty_mutex for tty count changes"), holding a tty lock while closing does not prevent other ttys from being opened/closed/hung up, but only prevents lifetime event changes for the tty under lock. Holding the tty lock while waiting for output to drain does prevent parallel non-blocking opens (O_NONBLOCK) from advancing or returning while the tty lock is held. However, all parallel opens _already_ block even if the tty lock is dropped while closing and the parallel open advances. Blocking in open has been in mainline since at least 2.6.29 (see tty_port_block_til_ready(); note the test for O_NONBLOCK is _after_ the wait while ASYNC_CLOSING). IOW, before this patch a non-blocking open will sleep anyway for the _entire_ duration of a parallel hardware shutdown, and when it wakes, the error return will cause a release of its tty, and it will restart with a fresh attempt to open. Similarly with a blocking open that is already waiting; when it's woken, the hardware shutdown has already completed to ASYNC_INITIALIZED is not set, which forces a release and restart as well. So, holding the tty lock across the _entire_ close (which is what this patch does), even while waiting for output to drain, is equivalent to the current outcome wrt parallel opens. Cc: Alan Cox <alan@linux.intel.com> Cc: David Laight <David.Laight@aculab.com> CC: Arnd Bergmann <arnd@arndb.de> CC: Karsten Keil <isdn@linux-pingi.de> CC: linuxppc-dev@lists.ozlabs.org Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-14mISDN: use kstrdup() in dsp_pipeline_buildGeliang Tang1-10/+2
Use kstrdup instead of strlen-kmalloc-strcpy. Remove unneeded NULL test, it will be tested inside kstrdup. Remove 0 length string test, it has been tested in the caller of dsp_pipeline_build. Signed-off-by: Geliang Tang <geliangtang@163.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-23isdn: hisax: fix frame calculationAndrzej Hajda1-5/+5
Difference of unsigned values is also unsigned so it does not make sense to check its sign. The problem has been detected using proposed semantic patch scripts/coccinelle/tests/unsigned_lesser_than_zero.cocci [1]. [1]: http://permalink.gmane.org/gmane.linux.kernel/2038576 Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-09Merge tag 'libnvdimm-for-4.3' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm updates from Dan Williams: "This update has successfully completed a 0day-kbuild run and has appeared in a linux-next release. The changes outside of the typical drivers/nvdimm/ and drivers/acpi/nfit.[ch] paths are related to the removal of IORESOURCE_CACHEABLE, the introduction of memremap(), and the introduction of ZONE_DEVICE + devm_memremap_pages(). Summary: - Introduce ZONE_DEVICE and devm_memremap_pages() as a generic mechanism for adding device-driver-discovered memory regions to the kernel's direct map. This facility is used by the pmem driver to enable pfn_to_page() operations on the page frames returned by DAX ('direct_access' in 'struct block_device_operations'). For now, the 'memmap' allocation for these "device" pages comes from "System RAM". Support for allocating the memmap from device memory will arrive in a later kernel. - Introduce memremap() to replace usages of ioremap_cache() and ioremap_wt(). memremap() drops the __iomem annotation for these mappings to memory that do not have i/o side effects. The replacement of ioremap_cache() with memremap() is limited to the pmem driver to ease merging the api change in v4.3. Completion of the conversion is targeted for v4.4. - Similar to the usage of memcpy_to_pmem() + wmb_pmem() in the pmem driver, update the VFS DAX implementation and PMEM api to provide persistence guarantees for kernel operations on a DAX mapping. - Convert the ACPI NFIT 'BLK' driver to map the block apertures as cacheable to improve performance. - Miscellaneous updates and fixes to libnvdimm including support for issuing "address range scrub" commands, clarifying the optimal 'sector size' of pmem devices, a clarification of the usage of the ACPI '_STA' (status) property for DIMM devices, and other minor fixes" * tag 'libnvdimm-for-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (34 commits) libnvdimm, pmem: direct map legacy pmem by default libnvdimm, pmem: 'struct page' for pmem libnvdimm, pfn: 'struct page' provider infrastructure x86, pmem: clarify that ARCH_HAS_PMEM_API implies PMEM mapped WB add devm_memremap_pages mm: ZONE_DEVICE for "device memory" mm: move __phys_to_pfn and __pfn_to_phys to asm/generic/memory_model.h dax: drop size parameter to ->direct_access() nd_blk: change aperture mapping from WC to WB nvdimm: change to use generic kvfree() pmem, dax: have direct_access use __pmem annotation dax: update I/O path to do proper PMEM flushing pmem: add copy_from_iter_pmem() and clear_pmem() pmem, x86: clean up conditional pmem includes pmem: remove layer when calling arch_has_wmb_pmem() pmem, x86: move x86 PMEM API to new pmem.h header libnvdimm, e820: make CONFIG_X86_PMEM_LEGACY a tristate option pmem: switch to devm_ allocations devres: add devm_memremap libnvdimm, btt: write and validate parent_uuid ...
2015-09-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds1-17/+5
Pull networking updates from David Miller: "Another merge window, another set of networking changes. I've heard rumblings that the lightweight tunnels infrastructure has been voted networking change of the year. But what do I know? 1) Add conntrack support to openvswitch, from Joe Stringer. 2) Initial support for VRF (Virtual Routing and Forwarding), which allows the segmentation of routing paths without using multiple devices. There are some semantic kinks to work out still, but this is a reasonably strong foundation. From David Ahern. 3) Remove spinlock fro act_bpf fast path, from Alexei Starovoitov. 4) Ignore route nexthops with a link down state in ipv6, just like ipv4. From Andy Gospodarek. 5) Remove spinlock from fast path of act_gact and act_mirred, from Eric Dumazet. 6) Document the DSA layer, from Florian Fainelli. 7) Add netconsole support to bcmgenet, systemport, and DSA. Also from Florian Fainelli. 8) Add Mellanox Switch Driver and core infrastructure, from Jiri Pirko. 9) Add support for "light weight tunnels", which allow for encapsulation and decapsulation without bearing the overhead of a full blown netdevice. From Thomas Graf, Jiri Benc, and a cast of others. 10) Add Identifier Locator Addressing support for ipv6, from Tom Herbert. 11) Support fragmented SKBs in iwlwifi, from Johannes Berg. 12) Allow perf PMUs to be accessed from eBPF programs, from Kaixu Xia. 13) Add BQL support to 3c59x driver, from Loganaden Velvindron. 14) Stop using a zero TX queue length to mean that a device shouldn't have a qdisc attached, use an explicit flag instead. From Phil Sutter. 15) Use generic geneve netdevice infrastructure in openvswitch, from Pravin B Shelar. 16) Add infrastructure to avoid re-forwarding a packet in software that was already forwarded by a hardware switch. From Scott Feldman. 17) Allow AF_PACKET fanout function to be implemented in a bpf program, from Willem de Bruijn" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1458 commits) netfilter: nf_conntrack: make nf_ct_zone_dflt built-in netfilter: nf_dup{4, 6}: fix build error when nf_conntrack disabled net: fec: clear receive interrupts before processing a packet ipv6: fix exthdrs offload registration in out_rt path xen-netback: add support for multicast control bgmac: Update fixed_phy_register() sock, diag: fix panic in sock_diag_put_filterinfo flow_dissector: Use 'const' where possible. flow_dissector: Fix function argument ordering dependency ixgbe: Resolve "initialized field overwritten" warnings ixgbe: Remove bimodal SR-IOV disabling ixgbe: Add support for reporting 2.5G link speed ixgbe: fix bounds checking in ixgbe_setup_tc for 82598 ixgbe: support for ethtool set_rxfh ixgbe: Avoid needless PHY access on copper phys ixgbe: cleanup to use cached mask value ixgbe: Remove second instance of lan_id variable ixgbe: use kzalloc for allocating one thing flow: Move __get_hash_from_flowi{4,6} into flow_dissector.c ixgbe: Remove unused PCI bus types ...
2015-08-11arch, drivers: don't include <asm/io.h> directly, use <linux/io.h> insteadDan Williams1-1/+1
Preparation for uniform definition of ioremap, ioremap_wc, ioremap_wt, and ioremap_cache, tree-wide. Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-08-11isdn: Remove reverse_bits(), use revbit8()yalin wang1-17/+5
This change isdn driver, remove reverse_bits() function, use the generic revbit8() function instead. Signed-off-by: yalin wang <yalin.wang2010@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-07treewide: Fix typo in printkMasanari Iida1-1/+1
This patch fix spelling typo inv various part of sources. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2015-07-16isdn/gigaset: drop unused ldisc methodsTilman Schmidt1-24/+0
The line discipline read and write methods are optional so the dummy methods in ser_gigaset are unnecessary and can be removed. Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-16isdn/gigaset: reset tty->receive_room when attaching ser_gigasetTilman Schmidt1-1/+10
Commit 79901317ce80 ("n_tty: Don't flush buffer when closing ldisc"), first merged in kernel release 3.10, caused the following regression in the Gigaset M101 driver: Before that commit, when closing the N_TTY line discipline in preparation to switching to N_GIGASET_M101, receive_room would be reset to a non-zero value by the call to n_tty_flush_buffer() in n_tty's close method. With the removal of that call, receive_room might be left at zero, blocking data reception on the serial line. The present patch fixes that regression by setting receive_room to an appropriate value in the ldisc open method. Fixes: 79901317ce80 ("n_tty: Don't flush buffer when closing ldisc") Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds4-13/+11
Pull networking updates from David Miller: 1) Add TX fast path in mac80211, from Johannes Berg. 2) Add TSO/GRO support to ibmveth, from Thomas Falcon 3) Move away from cached routes in ipv6, just like ipv4, from Martin KaFai Lau. 4) Lots of new rhashtable tests, from Thomas Graf. 5) Run ingress qdisc lockless, from Alexei Starovoitov. 6) Allow servers to fetch TCP packet headers for SYN packets of new connections, for fingerprinting. From Eric Dumazet. 7) Add mode parameter to pktgen, for testing receive. From Alexei Starovoitov. 8) Cache access optimizations via simplifications of build_skb(), from Alexander Duyck. 9) Move page frag allocator under mm/, also from Alexander. 10) Add xmit_more support to hv_netvsc, from KY Srinivasan. 11) Add a counter guard in case we try to perform endless reclassify loops in the packet scheduler. 12) Extern flow dissector to be programmable and use it in new "Flower" classifier. From Jiri Pirko. 13) AF_PACKET fanout rollover fixes, performance improvements, and new statistics. From Willem de Bruijn. 14) Add netdev driver for GENEVE tunnels, from John W Linville. 15) Add ingress netfilter hooks and filtering, from Pablo Neira Ayuso. 16) Fix handling of epoll edge triggers in TCP, from Eric Dumazet. 17) Add an ECN retry fallback for the initial TCP handshake, from Daniel Borkmann. 18) Add tail call support to BPF, from Alexei Starovoitov. 19) Add several pktgen helper scripts, from Jesper Dangaard Brouer. 20) Add zerocopy support to AF_UNIX, from Hannes Frederic Sowa. 21) Favor even port numbers for allocation to connect() requests, and odd port numbers for bind(0), in an effort to help avoid ip_local_port_range exhaustion. From Eric Dumazet. 22) Add Cavium ThunderX driver, from Sunil Goutham. 23) Allow bpf programs to access skb_iif and dev->ifindex SKB metadata, from Alexei Starovoitov. 24) Add support for T6 chips in cxgb4vf driver, from Hariprasad Shenai. 25) Double TCP Small Queues default to 256K to accomodate situations like the XEN driver and wireless aggregation. From Wei Liu. 26) Add more entropy inputs to flow dissector, from Tom Herbert. 27) Add CDG congestion control algorithm to TCP, from Kenneth Klette Jonassen. 28) Convert ipset over to RCU locking, from Jozsef Kadlecsik. 29) Track and act upon link status of ipv4 route nexthops, from Andy Gospodarek. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1670 commits) bridge: vlan: flush the dynamically learned entries on port vlan delete bridge: multicast: add a comment to br_port_state_selection about blocking state net: inet_diag: export IPV6_V6ONLY sockopt stmmac: troubleshoot unexpected bits in des0 & des1 net: ipv4 sysctl option to ignore routes when nexthop link is down net: track link-status of ipv4 nexthops net: switchdev: ignore unsupported bridge flags net: Cavium: Fix MAC address setting in shutdown state drivers: net: xgene: fix for ACPI support without ACPI ip: report the original address of ICMP messages net/mlx5e: Prefetch skb data on RX net/mlx5e: Pop cq outside mlx5e_get_cqe net/mlx5e: Remove mlx5e_cq.sqrq back-pointer net/mlx5e: Remove extra spaces net/mlx5e: Avoid TX CQE generation if more xmit packets expected net/mlx5e: Avoid redundant dev_kfree_skb() upon NOP completion net/mlx5e: Remove re-assignment of wq type in mlx5e_enable_rq() net/mlx5e: Use skb_shinfo(skb)->gso_segs rather than counting them net/mlx5e: Static mapping of netdev priv resources to/from netdev TX queues net/mlx4_en: Use HW counters for rx/tx bytes/packets in PF device ...
2015-06-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-2/+2
Conflicts: drivers/net/ethernet/mellanox/mlx4/main.c net/packet/af_packet.c Both conflicts were cases of simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-24Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree updates from Jiri Kosina: "As usual, mostly comment, kerneldoc and printk() fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: lpfc: Grammar s/an negative/a negative/ ARM: lib/lib1funcs.S: fix typo s/substractions/subtractions/ cx25821: cx25821-medusa-reg.h: fix 0x0x prefix lib: crc-itu-t.[ch] fix 0x0x prefix in integer constants rapidio: Fix kerneldoc and comment qla4xxx: Fix printk() in qla4_83xx_read_reset_template() and qla4_83xx_pre_loopback_config() treewide: Kconfig: fix wording / spelling usb/serial: fix grammar in Kconfig help text for FTDI_SIO megaraid_sas: fix kerneldoc netfilter: ebtables: fix comment grammar drm/radeon: fix comment isdn: fix grammar in comment ARM: KVM: fix comment
2015-06-21isdn: disable HiSax NetJet driver on microblaze archNicolai Stange1-2/+2
Fix an allmodconfig compilation failer on microblaze due to big endian architectures being apparently unsupported by the NetJet code: drivers/isdn/hisax/nj_s.c: In function 'setup_netjet_s': drivers/isdn/hisax/nj_s.c:265:2: error: #error "not running on big endian machines now" Modify the relevant Kconfig such that the NetJet code is not built on microblaze anymore. Note that endianess on microblaze is not determined through Kconfig, but by means of a compiler provided CPP macro, namely __MICROBLAZEEL__. However, gcc defaults to big endianess on that platform. Signed-off-by: Nicolai Stange <nicstange@gmail.com> Acked-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-08isdn/hisax: Convert use of __constant_cpu_to_le16 to cpu_to_le16Vaishali Thakkar1-2/+2
In big endian cases, macro cpu_to_le16 unfolds to __swab16 which provides special case for constants. In little endian cases, __constant_cpu_to_le16 and cpu_to_le16 expand directly to the same expression. So, replace __constant_cpu_to_le16 with cpu_to_le16 with the goal of getting rid of the definition of __constant_cpu_to_le16 completely. The semantic patch that performs this transformation is as follows: @@expression x;@@ - __constant_cpu_to_le16(x) + cpu_to_le16(x) Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-01isdn/capi: Use setup_timerVaishali Thakkar1-3/+1
Use the timer API function setup_timer instead of structure field assignments to initialize a timer. A simplified version of the Coccinelle semantic patch that performs this transformation is as follows: @change@ expression e1, e2, e3, e4, a, b; @@ -init_timer(&e1); +setup_timer(&e1, a, b); ... when != a = e2 when != b = e3 -e1.data = b; ... when != a = e4 -e1.function = a; Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-26isdn: fix grammar in commentGeert Uytterhoeven1-1/+1
Fix grammar / typo in comment. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Karsten Keil <isdn@linux-pingi.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-05-11net: Pass kern from net_proto_family.create to sk_allocEric W. Biederman1-6/+6
In preparation for changing how struct net is refcounted on kernel sockets pass the knowledge that we are creating a kernel socket from sock_create_kern through to sk_alloc. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds3-207/+198
Pull networking updates from David Miller: 1) Add BQL support to via-rhine, from Tino Reichardt. 2) Integrate SWITCHDEV layer support into the DSA layer, so DSA drivers can support hw switch offloading. From Floria Fainelli. 3) Allow 'ip address' commands to initiate multicast group join/leave, from Madhu Challa. 4) Many ipv4 FIB lookup optimizations from Alexander Duyck. 5) Support EBPF in cls_bpf classifier and act_bpf action, from Daniel Borkmann. 6) Remove the ugly compat support in ARP for ugly layers like ax25, rose, etc. And use this to clean up the neigh layer, then use it to implement MPLS support. All from Eric Biederman. 7) Support L3 forwarding offloading in switches, from Scott Feldman. 8) Collapse the LOCAL and MAIN ipv4 FIB tables when possible, to speed up route lookups even further. From Alexander Duyck. 9) Many improvements and bug fixes to the rhashtable implementation, from Herbert Xu and Thomas Graf. In particular, in the case where an rhashtable user bulk adds a large number of items into an empty table, we expand the table much more sanely. 10) Don't make the tcp_metrics hash table per-namespace, from Eric Biederman. 11) Extend EBPF to access SKB fields, from Alexei Starovoitov. 12) Split out new connection request sockets so that they can be established in the main hash table. Much less false sharing since hash lookups go direct to the request sockets instead of having to go first to the listener then to the request socks hashed underneath. From Eric Dumazet. 13) Add async I/O support for crytpo AF_ALG sockets, from Tadeusz Struk. 14) Support stable privacy address generation for RFC7217 in IPV6. From Hannes Frederic Sowa. 15) Hash network namespace into IP frag IDs, also from Hannes Frederic Sowa. 16) Convert PTP get/set methods to use 64-bit time, from Richard Cochran. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1816 commits) fm10k: Bump driver version to 0.15.2 fm10k: corrected VF multicast update fm10k: mbx_update_max_size does not drop all oversized messages fm10k: reset head instead of calling update_max_size fm10k: renamed mbx_tx_dropped to mbx_tx_oversized fm10k: update xcast mode before synchronizing multicast addresses fm10k: start service timer on probe fm10k: fix function header comment fm10k: comment next_vf_mbx flow fm10k: don't handle mailbox events in iov_event path and always process mailbox fm10k: use separate workqueue for fm10k driver fm10k: Set PF queues to unlimited bandwidth during virtualization fm10k: expose tx_timeout_count as an ethtool stat fm10k: only increment tx_timeout_count in Tx hang path fm10k: remove extraneous "Reset interface" message fm10k: separate PF only stats so that VF does not display them fm10k: use hw->mac.max_queues for stats fm10k: only show actual queues, not the maximum in hardware fm10k: allow creation of VLAN on default vid fm10k: fix unused warnings ...