summaryrefslogtreecommitdiff
path: root/drivers/irqchip
AgeCommit message (Collapse)AuthorFilesLines
2016-10-15Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds1-20/+10
Pull MIPS updates from Ralf Baechle: "This is the main MIPS pull request for 4.9: MIPS core arch code: - traps: 64bit kernels should read CP0_EBase 64bit - traps: Convert ebase to KSEG0 - c-r4k: Drop bc_wback_inv() from icache flush - c-r4k: Split user/kernel flush_icache_range() - cacheflush: Use __flush_icache_user_range() - uprobes: Flush icache via kernel address - KVM: Use __local_flush_icache_user_range() - c-r4k: Fix flush_icache_range() for EVA - Fix -mabi=64 build of vdso.lds - VDSO: Drop duplicated -I*/-E* aflags - tracing: move insn_has_delay_slot to a shared header - tracing: disable uprobe/kprobe on compact branch instructions - ptrace: Fix regs_return_value for kernel context - Squash lines for simple wrapper functions - Move identification of VP(E) into proc.c from smp-mt.c - Add definitions of SYNC barrierstype values - traps: Ensure full EBase is written - tlb-r4k: If there are wired entries, don't use TLBINVF - Sanitise coherentio semantics - dma-default: Don't check hw_coherentio if device is non-coherent - Support per-device DMA coherence - Adjust MIPS64 CAC_BASE to reflect Config.K0 - Support generating Flattened Image Trees (.itb) - generic: Introduce generic DT-based board support - generic: Convert SEAD-3 to a generic board - Enable hardened usercopy - Don't specify STACKPROTECTOR in defconfigs Octeon: - Delete dead code and files across the platform. - Change to use all memory into use by default. - Rename upper case variables in setup code to lowercase. - Delete legacy hack for broken bootloaders. - Leave maintaining the link state to the actual ethernet/PHY drivers. - Add DTS for D-Link DSR-500N. - Fix PCI interrupt routing on D-Link DSR-500N. Pistachio: - Remove ANDROID_TIMED_OUTPUT from defconfig TX39xx: - Move GPIO setup from .mem_setup() to .arch_init() - Convert to Common Clock Framework TX49xx: - Move GPIO setup from .mem_setup() to .arch_init() - Convert to Common Clock Framework txx9wdt: - Add missing clock (un)prepare calls for CCF BMIPS: - Add PW, GPIO SDHCI and NAND device node names - Support APPENDED_DTB - Add missing bcm97435svmb to DT_NONE - Rename bcm96358nb4ser to bcm6358-neufbox4-sercom - Add DT examples for BCM63268, BCM3368 and BCM6362 - Add support for BCM3368 and BCM6362 PCI - Reduce stack frame usage - Use struct list_head lists - Support for CONFIG_PCI_DOMAINS_GENERIC - Make pcibios_set_cache_line_size an initcall - Inline pcibios_assign_all_busses - Split pci.c into pci.c & pci-legacy.c - Introduce CONFIG_PCI_DRIVERS_LEGACY - Support generic drivers CPC - Convert bare 'unsigned' to 'unsigned int' - Avoid lock when MIPS CM >= 3 is present GIC: - Delete unused file smp-gic.c mt7620: - Delete unnecessary assignment for the field "owner" from PCI BCM63xx: - Let clk_disable() return immediately if clk is NULL pm-cps: - Change FSB workaround to CPU blacklist - Update comments on barrier instructions - Use MIPS standard lightweight ordering barrier - Use MIPS standard completion barrier - Remove selection of sync types - Add MIPSr6 CPU support - Support CM3 changes to Coherence Enable Register SMP: - Wrap call to mips_cpc_lock_other in mips_cm_lock_other - Introduce mechanism for freeing and allocating IPIs cpuidle: - cpuidle-cps: Enable use with MIPSr6 CPUs. SEAD3: - Rewrite to use DT and generic kernel feature. USB: - host: ehci-sead3: Remove SEAD-3 EHCI code FBDEV: - cobalt_lcdfb: Drop SEAD3 support dt-bindings: - Document a binding for simple ASCII LCDs auxdisplay: - img-ascii-lcd: driver for simple ASCII LCD displays irqchip i8259: - i8259: Add domain before mapping parent irq - i8259: Allow platforms to override poll function - i8259: Remove unused i8259A_irq_pending Malta: - Rewrite to use DT of/platform: - Probe "isa" busses by default CM: - Print CM error reports upon bus errors Module: - Migrate exception table users off module.h and onto extable.h - Make various drivers explicitly non-modular: - Audit and remove any unnecessary uses of module.h mailmap: - Canonicalize to Qais' current email address. Documentation: - MIPS supports HAVE_REGS_AND_STACK_ACCESS_API Loongson1C: - Add CPU support for Loongson1C - Add board support - Add defconfig - Add RTC support for Loongson1C board All this except one Documentation fix has sat in linux-next and has survived Imagination's automated build test system" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (127 commits) Documentation: MIPS supports HAVE_REGS_AND_STACK_ACCESS_API MIPS: ptrace: Fix regs_return_value for kernel context MIPS: VDSO: Drop duplicated -I*/-E* aflags MIPS: Fix -mabi=64 build of vdso.lds MIPS: Enable hardened usercopy MIPS: generic: Convert SEAD-3 to a generic board MIPS: generic: Introduce generic DT-based board support MIPS: Support generating Flattened Image Trees (.itb) MIPS: Adjust MIPS64 CAC_BASE to reflect Config.K0 MIPS: Print CM error reports upon bus errors MIPS: Support per-device DMA coherence MIPS: dma-default: Don't check hw_coherentio if device is non-coherent MIPS: Sanitise coherentio semantics MIPS: PCI: Support generic drivers MIPS: PCI: Introduce CONFIG_PCI_DRIVERS_LEGACY MIPS: PCI: Split pci.c into pci.c & pci-legacy.c MIPS: PCI: Inline pcibios_assign_all_busses MIPS: PCI: Make pcibios_set_cache_line_size an initcall MIPS: PCI: Support for CONFIG_PCI_DOMAINS_GENERIC MIPS: PCI: Use struct list_head lists ...
2016-10-12Merge branch 'akpm' (patches from Andrew)Linus Torvalds4-4/+0
Merge more updates from Andrew Morton: - a few block updates that fell in my lap - lib/ updates - checkpatch - autofs - ipc - a ton of misc other things * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (100 commits) mm: split gfp_mask and mapping flags into separate fields fs: use mapping_set_error instead of opencoded set_bit treewide: remove redundant #include <linux/kconfig.h> hung_task: allow hung_task_panic when hung_task_warnings is 0 kthread: add kerneldoc for kthread_create() kthread: better support freezable kthread workers kthread: allow to modify delayed kthread work kthread: allow to cancel kthread work kthread: initial support for delayed kthread work kthread: detect when a kthread work is used by more workers kthread: add kthread_destroy_worker() kthread: add kthread_create_worker*() kthread: allow to call __kthread_create_on_node() with va_list args kthread/smpboot: do not park in kthread_create_on_cpu() kthread: kthread worker API cleanup kthread: rename probe_kthread_data() to kthread_probe_data() scripts/tags.sh: enable code completion in VIM mm: kmemleak: avoid using __va() on addresses that don't have a lowmem mapping kdump, vmcoreinfo: report memory sections virtual addresses ipc/sem.c: add cond_resched in exit_sme ...
2016-10-12treewide: remove redundant #include <linux/kconfig.h>Masahiro Yamada4-4/+0
Kernel source files need not include <linux/kconfig.h> explicitly because the top Makefile forces to include it with: -include $(srctree)/include/linux/kconfig.h This commit removes explicit includes except the following: * arch/s390/include/asm/facilities_src.h * tools/testing/radix-tree/linux/kernel.h These two are used for host programs. Link: http://lkml.kernel.org/r/1473656164-11929-1-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-11Merge tag 'iommu-updates-v4.9' of ↵Linus Torvalds2-0/+6
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU updates from Joerg Roedel: - support for interrupt virtualization in the AMD IOMMU driver. These patches were shared with the KVM tree and are already merged through that tree. - generic DT-binding support for the ARM-SMMU driver. With this the driver now makes use of the generic DMA-API code. This also required some changes outside of the IOMMU code, but these are acked by the respective maintainers. - more cleanups and fixes all over the place. * tag 'iommu-updates-v4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (40 commits) iommu/amd: No need to wait iommu completion if no dte irq entry change iommu/amd: Free domain id when free a domain of struct dma_ops_domain iommu/amd: Use standard bitmap operation to set bitmap iommu/amd: Clean up the cmpxchg64 invocation iommu/io-pgtable-arm: Check for v7s-incapable systems iommu/dma: Avoid PCI host bridge windows iommu/dma: Add support for mapping MSIs iommu/arm-smmu: Set domain geometry iommu/arm-smmu: Wire up generic configuration support Docs: dt: document ARM SMMU generic binding usage iommu/arm-smmu: Convert to iommu_fwspec iommu/arm-smmu: Intelligent SMR allocation iommu/arm-smmu: Add a stream map entry iterator iommu/arm-smmu: Streamline SMMU data lookups iommu/arm-smmu: Refactor mmu-masters handling iommu/arm-smmu: Keep track of S2CR state iommu/arm-smmu: Consolidate stream map entry state iommu/arm-smmu: Handle stream IDs more dynamically iommu/arm-smmu: Set PRIVCFG in stage 1 STEs iommu/arm-smmu: Support non-PCI devices with SMMUv3 ...
2016-10-10Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds2-2/+0
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Thomas Gleixner: "Two small kerneldoc fixes from Julia Lawall" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/metag-ext: Improve function-level documentation irqchip/vic: Improve function-level documentation
2016-10-08Merge tag 'armsoc-cleanup' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC cleanups from Arnd Bergmann: "The cleanups for v4.9 are a little larger that usual, but thankfully that is almost exclusively due to removing a significant number of files that have become obsolete after the still ongoing conversion of old board files to devicetree. - for mach-omap2, which is still the largest platform in arch/arm/, the conversion to DT is finally complete after the Nokia N900 is now fully supported there, along with the omap3 LDP, and we can remove those two board files. If no regressions are found, another large cleanup for the platform will happen as a follow-up, removing dead code and restructuring the platform based on being DT-only. - In mach-imx, similar work is ongoing, but has not come that far. This time, we remove the obsolete board file for the i.MX1 generation, which like i.MX25, i.MX5, i.MX6, and i.MX7 is now DT-only. The remaining board files are for i.MX2 and i.MX3 machines based on old ARM926 or ARM1136 cores that should work with DT in principle. - realview has just been converted from board files to DT, and a lot of code gets removed in the process. This is the last ARM/Keil/Versatile derived platform that was still using board files, the other ones being integrator, versatile and vexpress. We can probably merge the remaining code into a single directory in the near future. - clps711x had completed the conversion in v4.8, but we accidentally left the files in place that should have been deleted then" * tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (21 commits) ARM: select PCI_DOMAINS config from ARCH_MULTIPLATFORM ARM: stop *MIGHT_HAVE_PCI* config from being selected redundantly ARM: imx: (trivial) fix typo and grammar ARM: clps711x: remove extraneous files ARM: imx: use IS_ENABLED() instead of checking for built-in or module ARM: OMAP2+: use IS_ENABLED() instead of checking for built-in or module ARM: OMAP1: use IS_ENABLED() instead of checking for built-in or module ARM: imx: remove platform-mxc_rnga ARM: realview: imply device tree boot ARM: realview: no need to select SMP_ON_UP explicitly ARM: realview: delete the RealView board files ARM: imx: no need to select SMP_ON_UP explicitly ARM: i.MX: Move SOC_IMX1 into 'Device tree only' ARM: i.MX: Remove i.MX1 non-DT support ARM: i.MX: Remove i.MX1 Synertronixx SCB9328 board support ARM: i.MX: Remove i.MX1 Armadeus APF9328 board support ARM: mxs: remove obsolete startup code for TX28 ARM: i.MX31 iomux: remove duplicates with alternate name ARM: i.MX31 iomux: remove plain duplicates ARM: OMAP2+: Drop legacy board file for LDP ...
2016-10-06irqchip: i8259: Remove unused i8259A_irq_pendingPaul Burton1-18/+0
The i8259A_irq_pending function is unused. Remove the dead code. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14271/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-06irqchip: i8259: Allow platforms to override poll functionPaul Burton1-1/+7
The default i8259 polling function (i8259_irq) is nicely generic but is fairly costly. Platforms often provide an alternative means of polling for an i8259 interrupt, and when using the i8259 without device tree have typically just chained its parent interrupt to their own handler function. In order to allow for platform-specific polling functions to be used in cases where the driver is probed via device tree, provide an i8259_set_poll function that accepts a pointer to an alternative poll function that will override the default. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14270/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-06irqchip: i8259: Add domain before mapping parent irqPaul Burton1-1/+3
Mapping the parent IRQ will use a virq number which may conflict with the hardcoded I8259A_IRQ_BASE..I8259A_IRQ_BASE+15 range that the i8259 driver expects to be free. If this occurs then we'll hit errors when adding the i8259 IRQ domain, since one of its virq numbers will already be in use. Avoid this by adding the i8259 domain before mapping the parent IRQ, such that the i8259 virq numbers become used before the parent interrupt controller gets a chance to use any of them. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14269/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-10-05irqchip/metag-ext: Improve function-level documentationJulia Lawall1-1/+0
Drop the variable irq which ceased to be a parameter. Issue detected using Coccinelle (http://coccinelle.lip6.fr/) Fixes: bd0b9ac405e1 ("genirq: Remove irq argument from irq flow handlers"). Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: James Hogan <james.hogan@imgtec.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: kernel-janitors@vger.kernel.org Cc: linux-metag@vger.kernel.org Link: http://lkml.kernel.org/r/1475351192-27079-15-git-send-email-Julia.Lawall@lip6.fr Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-10-05irqchip/vic: Improve function-level documentationJulia Lawall1-1/+0
The associated function, vic_init_cascaded, has never had a variable irq_start. Issue detected using Coccinelle (http://coccinelle.lip6.fr/) Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: kernel-janitors@vger.kernel.org Cc: Jason Cooper <jason@lakedaemon.net> Link: http://lkml.kernel.org/r/1475351192-27079-14-git-send-email-Julia.Lawall@lip6.fr Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-09-22Merge tag 'irqchip-core-4.9' of git://git.infradead.org/users/jcooper/linux ↵Thomas Gleixner6-7/+306
into irq/core Pull irqchip core changes for v4.9 from Jason Cooper - jcore: Add AIC driver - mips-gic: Use for_each_set_bit - mvebu: Add PIC driver
2016-09-21drivers/irqchip: Add STM32 external interrupts supportAlexandre TORGUE3-0/+206
The STM32 external interrupt controller consists of edge detectors that generate interrupts requests or wake-up events. Each line can be independently configured as interrupt or wake-up source, and triggers either on rising, falling or both edges. Each line can also be masked independently. Originally-from: Maxime Coquelin <mcoquelin.stm32@gmail.com> Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: devicetree@vger.kernel.org Cc: Daniel Thompson <daniel.thompson@linaro.org> Cc: Jason Cooper <jason@lakedaemon.net> Cc: arnd@arndb.de Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: bruherrera@gmail.com Cc: Linus Walleij <linus.walleij@linaro.org> Cc: linux-gpio@vger.kernel.org Cc: Rob Herring <robh+dt@kernel.org> Cc: lee.jones@linaro.org Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1474387259-18926-3-git-send-email-alexandre.torgue@st.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-09-21irqchip/mips-gic: Use for_each_set_bit to iterate over local IRQsPaul Burton1-6/+1
The MIPS GIC driver has previously iterated over bits set in a bitmap representing pending local IRQs by calling find_first_bit, clearing that bit then calling find_first_bit again until all bits are clear. If multiple interrupts are pending then this is wasteful, as find_first_bit will have to loop over the whole bitmap from the start. Use the for_each_set_bit macro which performs exactly what we need here instead. It will use find_next_bit and thus only scan over the relevant part of the bitmap, and it makes the intent of the code clearer. This makes the same change for local interrupts that commit cae750bae4e4 ("irqchip: mips-gic: Use for_each_set_bit to iterate over IRQs") made for shared interrupts. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-mips@linux-mips.org Cc: Jason Cooper <jason@lakedaemon.net> Link: http://lkml.kernel.org/r/20160913165427.31686-1-paul.burton@imgtec.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-09-21Merge branch 'irq/urgent' into irq/coreThomas Gleixner4-62/+60
Merge urgent fixes so pending patches for 4.9 can be applied.
2016-09-21irqchip/mips-gic: Fix local interruptsPaul Burton1-55/+50
Since the device hierarchy domain was added by commit c98c1822ee13 ("irqchip/mips-gic: Add device hierarchy domain"), GIC local interrupts have been broken. Users attempting to setup a per-cpu local IRQ, for example the GIC timer clock events code in drivers/clocksource/mips-gic-timer.c, the setup_percpu_irq function would refuse with -EINVAL because the GIC irqchip driver never called irq_set_percpu_devid so the IRQ_PER_CPU_DEVID flag was never set for the IRQ. This happens because irq_set_percpu_devid was being called from the gic_irq_domain_map function which is no longer called. Doing only that runs into further problems because gic_dev_domain_alloc set the struct irq_chip for all interrupts, local or shared, to gic_level_irq_controller despite that only being suitable for shared interrupts. The typical outcome of this is that gic_level_irq_controller callback functions are called for local interrupts, and then hwirq number calculations overflow & the driver ends up attempting to access some invalid register with an address calculated from an invalid hwirq number. Best case scenario is that this then leads to a bus error. This is fixed by abstracting the setup of the hwirq & chip to a new function gic_setup_dev_chip which is used by both the root GIC IRQ domain & the device domain. Finally, decoding local interrupts failed because gic_dev_domain_alloc only called irq_domain_alloc_irqs_parent for shared interrupts. Local ones were therefore never associated with hwirqs in the root GIC IRQ domain and the virq in gic_handle_local_int would always be 0. This is fixed by calling irq_domain_alloc_irqs_parent unconditionally & having gic_irq_domain_alloc handle both local & shared interrupts, which is easy due to the aforementioned abstraction of chip setup into gic_setup_dev_chip. This fixes use of the MIPS GIC timer for clock events, which has been broken since c98c1822ee13 ("irqchip/mips-gic: Add device hierarchy domain") but hadn't been noticed due to a silent fallback to the MIPS coprocessor 0 count/compare clock events device. Fixes: c98c1822ee13 ("irqchip/mips-gic: Add device hierarchy domain") Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Jason Cooper <jason@lakedaemon.net> Cc: Qais Yousef <qsyousef@gmail.com> Cc: stable@vger.kernel.org Cc: Marc Zyngier <marc.zyngier@arm.com> Link: http://lkml.kernel.org/r/20160913165335.31389-1-paul.burton@imgtec.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-09-20Merge branch 'for-joerg/arm-smmu/updates' of ↵Joerg Roedel2-0/+6
git://git.kernel.org/pub/scm/linux/kernel/git/will/linux into arm/smmu
2016-09-20irqchip/gicv3: Silence noisy DEBUG_PER_CPU_MAPS warningJames Morse1-3/+4
gic_raise_softirq() walks the list of cpus using for_each_cpu(), it calls gic_compute_target_list() which advances the iterator by the number of CPUs in the cluster. If gic_compute_target_list() reaches the last CPU it leaves the iterator pointing at the last CPU. This means the next time round the for_each_cpu() loop cpumask_next() will be called with an invalid CPU. This triggers a warning when built with CONFIG_DEBUG_PER_CPU_MAPS: [ 3.077738] GICv3: CPU1: found redistributor 1 region 0:0x000000002f120000 [ 3.077943] CPU1: Booted secondary processor [410fd0f0] [ 3.078542] ------------[ cut here ]------------ [ 3.078746] WARNING: CPU: 1 PID: 0 at ../include/linux/cpumask.h:121 gic_raise_softirq+0x12c/0x170 [ 3.078812] Modules linked in: [ 3.078869] [ 3.078930] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.8.0-rc5+ #5188 [ 3.078994] Hardware name: Foundation-v8A (DT) [ 3.079059] task: ffff80087a1a0080 task.stack: ffff80087a19c000 [ 3.079145] PC is at gic_raise_softirq+0x12c/0x170 [ 3.079226] LR is at gic_raise_softirq+0xa4/0x170 [ 3.079296] pc : [<ffff0000083ead24>] lr : [<ffff0000083eac9c>] pstate: 200001c9 [ 3.081139] Call trace: [ 3.081202] Exception stack(0xffff80087a19fbe0 to 0xffff80087a19fd10) [ 3.082269] [<ffff0000083ead24>] gic_raise_softirq+0x12c/0x170 [ 3.082354] [<ffff00000808e614>] smp_send_reschedule+0x34/0x40 [ 3.082433] [<ffff0000080e80a0>] resched_curr+0x50/0x88 [ 3.082512] [<ffff0000080e89d0>] check_preempt_curr+0x60/0xd0 [ 3.082593] [<ffff0000080e8a60>] ttwu_do_wakeup+0x20/0xe8 [ 3.082672] [<ffff0000080e8bb8>] ttwu_do_activate+0x90/0xc0 [ 3.082753] [<ffff0000080ea9a4>] try_to_wake_up+0x224/0x370 [ 3.082836] [<ffff0000080eabc8>] default_wake_function+0x10/0x18 [ 3.082920] [<ffff000008103134>] __wake_up_common+0x5c/0xa0 [ 3.083003] [<ffff0000081031f4>] __wake_up_locked+0x14/0x20 [ 3.083086] [<ffff000008103f80>] complete+0x40/0x60 [ 3.083168] [<ffff00000808df7c>] secondary_start_kernel+0x15c/0x1d0 [ 3.083240] [<00000000808911a4>] 0x808911a4 [ 3.113401] Detected PIPT I-cache on CPU2 Avoid updating the iterator if the next call to cpumask_next() would cause the for_each_cpu() loop to exit. There is no change to gic_raise_softirq()'s behaviour, (cpumask_next()s eventual call to _find_next_bit() will return early as start >= nbits), this patch just silences the warning. Fixes: 021f653791ad ("irqchip: gic-v3: Initial support for GICv3") Signed-off-by: James Morse <james.morse@arm.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Jason Cooper <jason@lakedaemon.net> Link: http://lkml.kernel.org/r/1474306155-3303-1-git-send-email-james.morse@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-09-16iommu/dma: Add support for mapping MSIsRobin Murphy2-0/+6
When an MSI doorbell is located downstream of an IOMMU, attaching devices to a DMA ops domain and switching on translation leads to a rude shock when their attempt to write to the physical address returned by the irqchip driver faults (or worse, writes into some already-mapped buffer) and no interrupt is forthcoming. Address this by adding a hook for relevant irqchip drivers to call from their compose_msi_msg() callback, to swizzle the physical address with an appropriatly-mapped IOVA for any device attached to one of our DMA ops domains. Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-09-13irqchip/atmel-aic: Fix potential deadlock in ->xlate()Boris Brezillon2-4/+6
aic5_irq_domain_xlate() and aic_irq_domain_xlate() take the generic chip lock without disabling interrupts, which can lead to a deadlock if an interrupt occurs while the lock is held in one of these functions. Replace irq_gc_{lock,unlock}() calls by irq_gc_{lock_irqsave,unlock_irqrestore}() ones to prevent this bug from happening. Fixes: b1479ebb7720 ("irqchip: atmel-aic: Add atmel AIC/AIC5 drivers") Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: stable@vger.kernel.org Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Link: http://lkml.kernel.org/r/1473775109-4192-2-git-send-email-boris.brezillon@free-electrons.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-09-12irqchip/gicv3-its: Use MADT ITS subtable to do PCI/MSI domain initializationTomasz Nowicki1-0/+44
Let ACPI build ITS PCI MSI domain. ACPI code is responsible for retrieving inner domain token and passing it on to its_pci_msi_init_one generic init call. IORT maintains list of registered domain tokens and allows to find corresponding domain based on MADT ITS subtable ID info. Signed-off-by: Tomasz Nowicki <tn@semihalf.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-09-12irqchip/gicv3-its: Factor out PCI-MSI part that might be reused for ACPITomasz Nowicki1-15/+29
Firmware agnostic code lands in common functions which do necessary domain initialization based on unique domain handler. DT specific code goes to DT specific init call. Signed-off-by: Tomasz Nowicki <tn@semihalf.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-09-12irqchip/gicv3-its: Probe ITS in the ACPI wayTomasz Nowicki2-1/+61
ITS is prepared for being initialized different than DT, therefore we can initialize it in ACPI way. We collect register base address from MADT table and pass mandatory info to firmware-agnostic ITS init call. Use here IORT lib to register ITS domain which then can be found and used on to build another PCI MSI domain in hierarchical stack domain. NOTE: Waiting for proper ITS and NUMA node relation description in IORT table, we pass around NUMA_NO_NODE to the its_probe_one init call. This means that Cavium ThunderX erratum 23144 (pass1.1 only) is not supported for ACPI boot method yet. Signed-off-by: Tomasz Nowicki <tn@semihalf.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-09-12irqchip/gicv3-its: Refactor ITS DT init code to prepare for ACPITomasz Nowicki2-32/+40
In order to add ACPI support we need to isolate ACPI&DT common code and move DT logic to corresponding functions. To achieve this we are using firmware agnostic handle which can be unpacked to either DT or ACPI node. No functional changes other than a very minor one: 1. Terminate its_init call with -ENODEV for non-DT case which allows to remove hack from its-gic-v3.c. 2. Fix ITS base register address type (from 'unsigned long' to 'phys_addr_t'), as a bonus we get nice string formatting. 3. Since there is only one of ITS parent domain convert it to static global variable and drop the parameter from its_probe_one. Users can refer to it in more convenient way then. Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Tomasz Nowicki <tn@semihalf.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-09-12irqchip/gicv3-its: Cleanup for ITS domain initializationTomasz Nowicki1-23/+34
There is no point to initialize ITS without having msi-controller property in corresponding DT node. However, its_probe is checking msi-controller presence at the end, so we can save our time and do that check prior to its_probe call. Also, for the code clarity purpose, we put domain initialization to separate function. Signed-off-by: Tomasz Nowicki <tn@semihalf.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-09-12irqchip/gic: Mark gic_init_physaddr() staticBaoyou Xie1-1/+1
We get 1 warning when building kernel with W=1: drivers/irqchip/irq-gic.c:917:13: warning: no previous prototype for 'gic_init_physaddr' [-Wmissing-prototypes] In fact, this function is only used in the file in which it is declared and don't need a declaration, but can be made static. so this patch marks this function with 'static'. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-09-12irqchip/gic-pm: Update driver to use of_pm_clk_add_clkJon Hunter1-18/+5
Commit 498b5fdd40dd ("PM / clk: Add support for adding a specific clock from device-tree") add a new helper function for adding a clock from device-tree to a device. Update the GIC-PM driver to use this new function to simplify the driver. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-09-12irqchip/gic-v3: Reset BPR during initializationDaniel Thompson1-0/+8
Currently, when running on FVP, CPU 0 boots up with its BPR changed from the reset value. This renders it impossible to (preemptively) prioritize interrupts on CPU 0. This is harmless on normal systems since Linux typically does not support preemptive interrupts. It does however cause problems in systems with additional changes (such as patches for NMI simulation). Many thanks to Andrew Thoelke for suggesting the BPR as having the potential to harm preemption. Suggested-by: Andrew Thoelke <andrew.thoelke@arm.com> Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-09-12irqchip/gic: Make locking a BL_SWITCHER only featureMarc Zyngier1-9/+27
The BL switcher code manipulates the logical/physical CPU mapping, forcing a lock to be taken on the IPI path. With an IPI heavy load, this single lock becomes contended. But when CONFIG_BL_SWITCHER is not enabled, there is no reason to take this lock at all since the CPU mapping is immutable. This patch allows the lock to be entierely removed when BL_SWITCHER is not enabled (which is the case in most configurations), leading to a small improvement of "perf bench sched pipe" (measured on an 8 core AMD Seattle system): Before: 101370 ops/sec After: 103680 ops/sec Take this opportunity to remove a useless lock being taken when handling an interrupt on a secondary GIC. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-09-02Merge tag 'realview-broomstick-sweep' of ↵Arnd Bergmann1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into next/cleanup Merge "delete the RealView boardfiles" from Linus Walleij: This deletes the realview boardfiles, consolidates a bit around the Kconfig options and leaves the mach-realview directory nice and tidy, with all boards migrated over to Device Tree. * tag 'realview-broomstick-sweep' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator: ARM: realview: imply device tree boot ARM: realview: no need to select SMP_ON_UP explicitly ARM: realview: delete the RealView board files
2016-09-01irqchip/keystone: Fix typo "sporious" -> "spurious"Colin Ian King1-1/+1
Trivial fix to typo in dev_warn message. Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lkml.kernel.org/r/20160901104454.26092-1-colin.king@canonical.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2016-08-23Merge branch 'irqchip/mvebu64' into irqchip/coreJason Cooper3-0/+201
2016-08-23Merge branch 'irqchip/jcore' into irqchip/coreJason Cooper3-0/+103
2016-08-23irqchip/mips-gic: Use for_each_set_bit to iterate over IRQsPaul Burton1-6/+1
The MIPS GIC driver has previously iterated over bits set in a bitmap representing pending IRQs by calling find_first_bit, clearing that bit then calling find_first_bit again until all bits are clear. If multiple interrupts are pending then this is wasteful, as find_first_bit will have to loop over the whole bitmap from the start. Use the for_each_set_bit macro which performs exactly what we need here instead. It will use find_next_bit and thus only scan over the relevant part of the bitmap, and it makes the intent of the code more clear. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Link: https://lkml.kernel.org/r/20160819171119.28121-1-paul.burton@imgtec.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2016-08-23irqchip/jcore-aic: Fix non static symbol warningWei Yongjun1-1/+2
Fixes the following sparse warning: drivers/irqchip/irq-jcore-aic.c:47:12: warning: symbol 'aic_irq_of_init' was not declared. Should it be static? Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com> Link: https://lkml.kernel.org/r/1471706788-27587-1-git-send-email-weiyj.lk@gmail.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2016-08-23irqchip/mvebu-pic: New driver for Marvell Armada 7K/8K PICThomas Petazzoni3-0/+201
The Marvell Armada 7K/8K integrates a secondary interrupt controller very originally named "PIC". It is connected to the main GIC via a PPI. Amongst other things, this PIC is used for the ARM PMU. This commit adds a simple irqchip driver for this interrupt controller. Since this interrupt controller is not needed early at boot time, we make the driver a proper platform driver rather than use the IRQCHIP_DECLARE() mechanism. Signed-off-by: Yehuda Yitschak <yehuday@marvell.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Link: https://lkml.kernel.org/r/1470408921-447-3-git-send-email-thomas.petazzoni@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2016-08-22irqchip/mips-gic: Implement activate op for device domainPaul Burton1-0/+7
If an IRQ is setup using __setup_irq(), which is used by the request_irq() family of functions, and we are using an SMP kernel then the affinity of the IRQ will be set via setup_affinity() immediately after the IRQ is enabled. This call to gic_set_affinity() will lead to the interrupt being mapped to a VPE. However there are other ways to use IRQs which don't cause affinity to be set, for example if it is used to chain to another IRQ controller with irq_set_chained_handler_and_data(). The irq_set_chained_handler_and_data() code path will enable the IRQ, but will not trigger a call to gic_set_affinity() and in this case nothing will map the interrupt to a VPE, meaning that the interrupt is never received. Fix this by implementing the activate operation for the GIC device IRQ domain, using gic_shared_irq_domain_map() to map the interrupt to the correct pin of cpu 0. Fixes: c98c1822ee13 ("irqchip/mips-gic: Add device hierarchy domain") Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20160819170715.27820-2-paul.burton@imgtec.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-08-22irqchip/mips-gic: Cleanup chip and handler setupPaul Burton1-4/+7
gic_shared_irq_domain_map() is called from gic_irq_domain_alloc() where the wrong chip has been set, and is then overwritten. Tidy this up by setting the correct chip the first time, and setting the handle_level_irq handler from gic_irq_domain_alloc() too. gic_shared_irq_domain_map() is also called from gic_irq_domain_map(), which now calls irq_set_chip_and_handler() to retain its previous behaviour. This patch prepares for a follow-on which will call gic_shared_irq_domain_map() from a callback where the lock on the struct irq_desc is held, which without this change would cause the call to irq_set_chip_and_handler() to lead to a deadlock. Fixes: c98c1822ee13 ("irqchip/mips-gic: Add device hierarchy domain") Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20160819170715.27820-1-paul.burton@imgtec.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-08-19irqchip/gicv3-its: Disable the ITS before initializing itDavid Daney1-1/+6
When starting a kexec/kdump kernel, the GIC ITS will already have been enabled. According to the ARM Generic Interrupt Controller Architecture Specification (GIC architecture Version 3.0 and version 4.0), writing to GITS_BASER<n> or GITS_CBASER is "UNPREDICTABLE" when the ITS is enabled. On Cavium Thunder systems, this prevents the ITS from being initializing in the kexec/kdump kernel, resulting in failure to register/enable interrupts for all devices. The fix is to disable the ITS if it is not already in the disabled state. This allows the ITS to be properly initialized and then re-enabled in the kexec/kdump kernel. Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-08-17irqchip/gicv3: Remove disabling redistributor and group1 non-secure interruptsSudeep Holla1-2/+9
As per the GICv3 specification, to power down a processor using GICv3 and allow automatic power-on if an interrupt must be sent to a processor, software must set Enable to zero for all interrupt groups(by writing to GICC_CTLR or ICC_IGRPEN{0,1}_EL1/3 as appropriate. When commit 3708d52fc6bb ("irqchip: gic-v3: Implement CPU PM notifier") was introduced there were no firmware implementations(in particular PSCI) handling this. Linux kernel may not be aware of the CPU power state details and might fail to identify the power states that require quiescing the CPU interface. Even if it can be aware of those details, it can't determine which CPU power state have been triggered at the platform level and how the power control is implemented. This patch make disabling redistributor and group1 non-secure interrupts in the power down path and re-enabling of redistributor in the power-up path conditional. It will be handled in the kernel if and only if the non-secure accesses are permitted to access and modify control registers. It is left to the platform implementation otherwise. Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Tested-by: Christopher Covington <cov@codeaurora.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-08-17irqchip/gic: Allow self-SGIs for SMP on UP configurationsMarc Zyngier1-0/+7
On systems where a single CPU is present, the GIC may not support having SGIs delivered to a target list. In that case, we use the self-SGI mechanism to allow the interrupt to be delivered locally. Tested-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-08-15ARM: realview: imply device tree bootLinus Walleij1-1/+1
This reduces the Kconfig for the RealView by assuming we are always booting from the device tree, and removing all the uses of CONFIG_REALVIEW_DT and replacing with CONFIG_ARCH_REALVIEW. Further: - Drop REALVIEW_HIGH_PHYS_OFFSET: we don't use this with device tree. - Drop the REALVIEW_EB_ARM11MP_REVB option: we now handle this by simply using another device tree. - Drop the PB1176 secure flash option: this is defined in the PB1176 device tree but marked as "disabled", so users who want to use it can simply enable it in the device tree and go hacking around. Cc: Brian Norris <computersforpeace@gmail.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-08-08irqchip/jcore-aic: Add J-Core AIC driverRich Felker3-0/+102
There are two versions of the J-Core interrupt controller in use, aic1 which generates interrupts with programmable priorities, but only supports 8 irq lines and maps them to cpu traps in the range 17 to 24, and aic2 which uses traps in the range 64-127 and supports up to 128 irqs, with priorities dependent on the interrupt number. The Linux driver does not make use of priorities anyway. For simplicity, there is no aic1-specific logic in the driver beyond setting the priority register, which is necessary for interrupts to work at all. Eventually aic1 will likely be phased out, but it's currently in use in deployments and all released bitstream binaries. Signed-off-by: Rich Felker <dalias@libc.org> Link: https://lkml.kernel.org/r/c3b89ef74aaa6477575dbe2d410eb1d182503243.147018b6529.git.dalias@libc.org Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2016-08-04tree-wide: replace config_enabled() with IS_ENABLED()Masahiro Yamada1-1/+1
The use of config_enabled() against config options is ambiguous. In practical terms, config_enabled() is equivalent to IS_BUILTIN(), but the author might have used it for the meaning of IS_ENABLED(). Using IS_ENABLED(), IS_BUILTIN(), IS_MODULE() etc. makes the intention clearer. This commit replaces config_enabled() with IS_ENABLED() where possible. This commit is only touching bool config options. I noticed two cases where config_enabled() is used against a tristate option: - config_enabled(CONFIG_HWMON) [ drivers/net/wireless/ath/ath10k/thermal.c ] - config_enabled(CONFIG_BACKLIGHT_CLASS_DEVICE) [ drivers/gpu/drm/gma500/opregion.c ] I did not touch them because they should be converted to IS_BUILTIN() in order to keep the logic, but I was not sure it was the authors' intention. Link: http://lkml.kernel.org/r/1465215656-20569-1-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Kees Cook <keescook@chromium.org> Cc: Stas Sergeev <stsp@list.ru> Cc: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Joshua Kinard <kumba@gentoo.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov <bp@suse.de> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: "Dmitry V. Levin" <ldv@altlinux.org> Cc: yu-cheng yu <yu-cheng.yu@intel.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Brian Gerst <brgerst@gmail.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Will Drewry <wad@chromium.org> Cc: Nikolay Martynov <mar.kolya@gmail.com> Cc: Huacai Chen <chenhc@lemote.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Cc: Rafal Milecki <zajec5@gmail.com> Cc: James Cowgill <James.Cowgill@imgtec.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Alex Smith <alex.smith@imgtec.com> Cc: Adam Buchbinder <adam.buchbinder@gmail.com> Cc: Qais Yousef <qais.yousef@imgtec.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Mikko Rapeli <mikko.rapeli@iki.fi> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com> Cc: "Luis R. Rodriguez" <mcgrof@do-not-panic.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Ingo Molnar <mingo@redhat.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Roland McGrath <roland@hack.frob.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Kalle Valo <kvalo@qca.qualcomm.com> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Tony Wu <tung7970@gmail.com> Cc: Huaitong Han <huaitong.han@intel.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Juergen Gross <jgross@suse.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andrea Gelmini <andrea.gelmini@gelma.net> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Rabin Vincent <rabin@rab.in> Cc: "Maciej W. Rozycki" <macro@imgtec.com> Cc: David Daney <david.daney@cavium.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-03Merge tag 'pci-v4.8-changes' of ↵Linus Torvalds1-10/+8
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Highlights: - ARM64 support for ACPI host bridges - new drivers for Axis ARTPEC-6 and Marvell Aardvark - new pci_alloc_irq_vectors() interface for MSI-X, MSI, legacy INTx - pci_resource_to_user() cleanup (more to come) Detailed summary: Enumeration: - Move ecam.h to linux/include/pci-ecam.h (Jayachandran C) - Add parent device field to ECAM struct pci_config_window (Jayachandran C) - Add generic MCFG table handling (Tomasz Nowicki) - Refactor pci_bus_assign_domain_nr() for CONFIG_PCI_DOMAINS_GENERIC (Tomasz Nowicki) - Factor DT-specific pci_bus_find_domain_nr() code out (Tomasz Nowicki) Resource management: - Add devm_request_pci_bus_resources() (Bjorn Helgaas) - Unify pci_resource_to_user() declarations (Bjorn Helgaas) - Implement pci_resource_to_user() with pcibios_resource_to_bus() (microblaze, powerpc, sparc) (Bjorn Helgaas) - Request host bridge window resources (designware, iproc, rcar, xgene, xilinx, xilinx-nwl) (Bjorn Helgaas) - Make PCI I/O space optional on ARM32 (Bjorn Helgaas) - Ignore write combining when mapping I/O port space (Bjorn Helgaas) - Claim bus resources on MIPS PCI_PROBE_ONLY set-ups (Bjorn Helgaas) - Remove unicore32 pci=firmware command line parameter handling (Bjorn Helgaas) - Support I/O resources when parsing host bridge resources (Jayachandran C) - Add helpers to request/release memory and I/O regions (Johannes Thumshirn) - Use pci_(request|release)_mem_regions (NVMe, lpfc, GenWQE, ethernet/intel, alx) (Johannes Thumshirn) - Extend pci=resource_alignment to specify device/vendor IDs (Koehrer Mathias (ETAS/ESW5)) - Add generic pci_bus_claim_resources() (Lorenzo Pieralisi) - Claim bus resources on ARM32 PCI_PROBE_ONLY set-ups (Lorenzo Pieralisi) - Remove ARM32 and ARM64 arch-specific pcibios_enable_device() (Lorenzo Pieralisi) - Add pci_unmap_iospace() to unmap I/O resources (Sinan Kaya) - Remove powerpc __pci_mmap_set_pgprot() (Yinghai Lu) PCI device hotplug: - Allow additional bus numbers for hotplug bridges (Keith Busch) - Ignore interrupts during D3cold (Lukas Wunner) Power management: - Enforce type casting for pci_power_t (Andy Shevchenko) - Don't clear d3cold_allowed for PCIe ports (Mika Westerberg) - Put PCIe ports into D3 during suspend (Mika Westerberg) - Power on bridges before scanning new devices (Mika Westerberg) - Runtime resume bridge before rescan (Mika Westerberg) - Add runtime PM support for PCIe ports (Mika Westerberg) - Remove redundant check of pcie_set_clkpm (Shawn Lin) Virtualization: - Add function 1 DMA alias quirk for Marvell 88SE9182 (Aaron Sierra) - Add DMA alias quirk for Adaptec 3805 (Alex Williamson) - Mark Atheros AR9485 and QCA9882 to avoid bus reset (Chris Blake) - Add ACS quirk for Solarflare SFC9220 (Edward Cree) MSI: - Fix PCI_MSI dependencies (Arnd Bergmann) - Add pci_msix_desc_addr() helper (Christoph Hellwig) - Switch msix_program_entries() to use pci_msix_desc_addr() (Christoph Hellwig) - Make the "entries" argument to pci_enable_msix() optional (Christoph Hellwig) - Provide sensible IRQ vector alloc/free routines (Christoph Hellwig) - Spread interrupt vectors in pci_alloc_irq_vectors() (Christoph Hellwig) Error Handling: - Bind DPC to Root Ports as well as Downstream Ports (Keith Busch) - Remove DPC tristate module option (Keith Busch) - Convert Downstream Port Containment driver to use devm_* functions (Mika Westerberg) Generic host bridge driver: - Select IRQ_DOMAIN (Arnd Bergmann) - Claim bus resources on PCI_PROBE_ONLY set-ups (Lorenzo Pieralisi) ACPI host bridge driver: - Add ARM64 acpi_pci_bus_find_domain_nr() (Tomasz Nowicki) - Add ARM64 ACPI support for legacy IRQs parsing and consolidation with DT code (Tomasz Nowicki) - Implement ARM64 AML accessors for PCI_Config region (Tomasz Nowicki) - Support ARM64 ACPI-based PCI host controller (Tomasz Nowicki) Altera host bridge driver: - Check link status before retrain link (Ley Foon Tan) - Poll for link up status after retraining the link (Ley Foon Tan) Axis ARTPEC-6 host bridge driver: - Add PCI_MSI_IRQ_DOMAIN dependency (Arnd Bergmann) - Add DT binding for Axis ARTPEC-6 PCIe controller (Niklas Cassel) - Add Axis ARTPEC-6 PCIe controller driver (Niklas Cassel) Intel VMD host bridge driver: - Use lock save/restore in interrupt enable path (Jon Derrick) - Select device dma ops to override (Keith Busch) - Initialize list item in IRQ disable (Keith Busch) - Use x86_vector_domain as parent domain (Keith Busch) - Separate MSI and MSI-X vector sharing (Keith Busch) Marvell Aardvark host bridge driver: - Add DT binding for the Aardvark PCIe controller (Thomas Petazzoni) - Add Aardvark PCI host controller driver (Thomas Petazzoni) - Add Aardvark PCIe support for Armada 3700 (Thomas Petazzoni) Microsoft Hyper-V host bridge driver: - Fix interrupt cleanup path (Cathy Avery) - Don't leak buffer in hv_pci_onchannelcallback() (Vitaly Kuznetsov) - Handle all pending messages in hv_pci_onchannelcallback() (Vitaly Kuznetsov) NVIDIA Tegra host bridge driver: - Program PADS_REFCLK_CFG* always, not just on legacy SoCs (Stephen Warren) - Program PADS_REFCLK_CFG* registers with per-SoC values (Stephen Warren) - Use lower-case hex consistently for register definitions (Thierry Reding) - Use generic pci_remap_iospace() rather than ARM32-specific one (Thierry Reding) - Stop setting pcibios_min_mem (Thierry Reding) Renesas R-Car host bridge driver: - Drop gen2 dummy I/O port region (Bjorn Helgaas) TI DRA7xx host bridge driver: - Fix return value in case of error (Christophe JAILLET) Xilinx AXI host bridge driver: - Fix return value in case of error (Christophe JAILLET) Miscellaneous: - Make bus_attr_resource_alignment static (Ben Dooks) - Include <asm/dma.h> for isa_dma_bridge_buggy (Ben Dooks) - MAINTAINERS: Add file patterns for PCI device tree bindings (Geert Uytterhoeven) - Make host bridge drivers explicitly non-modular (Paul Gortmaker)" * tag 'pci-v4.8-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (125 commits) PCI: xgene: Make explicitly non-modular PCI: thunder-pem: Make explicitly non-modular PCI: thunder-ecam: Make explicitly non-modular PCI: tegra: Make explicitly non-modular PCI: rcar-gen2: Make explicitly non-modular PCI: rcar: Make explicitly non-modular PCI: mvebu: Make explicitly non-modular PCI: layerscape: Make explicitly non-modular PCI: keystone: Make explicitly non-modular PCI: hisi: Make explicitly non-modular PCI: generic: Make explicitly non-modular PCI: designware-plat: Make it explicitly non-modular PCI: artpec6: Make explicitly non-modular PCI: armada8k: Make explicitly non-modular PCI: artpec: Add PCI_MSI_IRQ_DOMAIN dependency PCI: Add ACS quirk for Solarflare SFC9220 arm64: dts: marvell: Add Aardvark PCIe support for Armada 3700 PCI: aardvark: Add Aardvark PCI host controller driver dt-bindings: add DT binding for the Aardvark PCIe controller PCI: tegra: Program PADS_REFCLK_CFG* registers with per-SoC values ...
2016-08-02Merge tag 'armsoc-drivers' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Olof Johansson: "Driver updates for ARM SoCs. A slew of changes this release cycle. The reset driver tree, that we merge through arm-soc for historical reasons, is also sizable this time around. Among the changes: - clps711x: Treewide changes to compatible strings, merged here for simplicity. - Qualcomm: SCM firmware driver cleanups, move to platform driver - ux500: Major cleanups, removal of old mach-specific infrastructure. - Atmel external bus memory driver - Move of brcmstb platform to the rest of bcm - PMC driver updates for tegra, various fixes and improvements - Samsung platform driver updates to support 64-bit Exynos platforms - Reset controller cleanups moving to devm_reset_controller_register() APIs - Reset controller driver for Amlogic Meson - Reset controller driver for Hisilicon hi6220 - ARM SCPI power domain support" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (100 commits) ARM: ux500: consolidate base platform files ARM: ux500: move soc_id driver to drivers/soc ARM: ux500: call ux500_setup_id later ARM: ux500: consolidate soc_device code in id.c ARM: ux500: remove cpu_is_u* helpers ARM: ux500: use CLK_OF_DECLARE() ARM: ux500: move l2x0 init to .init_irq mfd: db8500 stop passing around platform data ASoC: ab8500-codec: remove platform data based probe ARM: ux500: move ab8500_regulator_plat_data into driver ARM: ux500: remove unused regulator data soc: raspberrypi-power: add CONFIG_OF dependency firmware: scpi: add CONFIG_OF dependency video: clps711x-fb: Changing the compatibility string to match with the smallest supported chip input: clps711x-keypad: Changing the compatibility string to match with the smallest supported chip pwm: clps711x: Changing the compatibility string to match with the smallest supported chip serial: clps711x: Changing the compatibility string to match with the smallest supported chip irqchip: clps711x: Changing the compatibility string to match with the smallest supported chip clocksource: clps711x: Changing the compatibility string to match with the smallest supported chip clk: clps711x: Changing the compatibility string to match with the smallest supported chip ...
2016-08-01Merge branch 'pci/msi-affinity' into nextBjorn Helgaas1-1/+11
Conflicts: drivers/nvme/host/pci.c
2016-07-29Merge branch 'smp-hotplug-for-linus' of ↵Linus Torvalds5-102/+46
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull smp hotplug updates from Thomas Gleixner: "This is the next part of the hotplug rework. - Convert all notifiers with a priority assigned - Convert all CPU_STARTING/DYING notifiers The final removal of the STARTING/DYING infrastructure will happen when the merge window closes. Another 700 hundred line of unpenetrable maze gone :)" * 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (70 commits) timers/core: Correct callback order during CPU hot plug leds/trigger/cpu: Move from CPU_STARTING to ONLINE level powerpc/numa: Convert to hotplug state machine arm/perf: Fix hotplug state machine conversion irqchip/armada: Avoid unused function warnings ARC/time: Convert to hotplug state machine clocksource/atlas7: Convert to hotplug state machine clocksource/armada-370-xp: Convert to hotplug state machine clocksource/exynos_mct: Convert to hotplug state machine clocksource/arm_global_timer: Convert to hotplug state machine rcu: Convert rcutree to hotplug state machine KVM/arm/arm64/vgic-new: Convert to hotplug state machine smp/cfd: Convert core to hotplug state machine x86/x2apic: Convert to CPU hotplug state machine profile: Convert to hotplug state machine timers/core: Convert to hotplug state machine hrtimer: Convert to hotplug state machine x86/tboot: Convert to hotplug state machine arm64/armv8 deprecated: Convert to hotplug state machine hwtracing/coresight-etm4x: Convert to hotplug state machine ...
2016-07-26Merge branch 'irq-core-for-linus' of ↵Linus Torvalds20-238/+827
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq updates from Thomas Gleixner: "The irq department delivers: - new core infrastructure to allow better management of multi-queue devices (interrupt spreading, node aware descriptor allocation ...) - a new interrupt flow handler to support the new fangled Intel VMD devices. - yet another new interrupt controller driver. - a series of fixes which addresses sparse warnings, missing includes, missing static declarations etc from Ben Dooks. - a fix for the error handling in the hierarchical domain allocation code. - the usual pile of small updates to core and driver code" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (46 commits) genirq: Fix missing irq allocation affinity hint irqdomain: Fix irq_domain_alloc_irqs_recursive() error handling irq/Documentation: Correct result of echnoing 5 to smp_affinity MAINTAINERS: Remove Jiang Liu from irq domains genirq/msi: Fix broken debug output genirq: Add a helper to spread an affinity mask for MSI/MSI-X vectors genirq/msi: Make use of affinity aware allocations genirq: Use affinity hint in irqdesc allocation genirq: Add affinity hint to irq allocation genirq: Introduce IRQD_AFFINITY_MANAGED flag genirq/msi: Remove unused MSI_FLAG_IDENTITY_MAP irqchip/s3c24xx: Fixup IO accessors for big endian irqchip/exynos-combiner: Fix usage of __raw IO irqdomain: Fix disposal of mappings for interrupt hierarchies irqchip/aspeed-vic: Add irq controller for Aspeed doc/devicetree: Add Aspeed VIC bindings x86/PCI/VMD: Use untracked irq handler genirq: Add untracked irq handler irqchip/mips-gic: Populate irq_domain names irqchip/gicv3-its: Implement two-level(indirect) device table support ...
2016-07-19irqchip/armada: Avoid unused function warningsArnd Bergmann1-1/+1
When building with CONFIG_SMP disabled, we get some new harmless warnings: drivers/irqchip/irq-armada-370-xp.c:356:12: error: 'mpic_cascaded_starting_cpu' defined but not used [-Werror=unused-function] static int mpic_cascaded_starting_cpu(unsigned int cpu) ^~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/irqchip/irq-armada-370-xp.c:349:12: error: 'armada_xp_mpic_starting_cpu' defined but not used [-Werror=unused-function] static int armada_xp_mpic_starting_cpu(unsigned int cpu) This moves the unused functions into the #ifdef, as they previously were. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Jason Cooper <jason@lakedaemon.net> Cc: David S. Miller <davem@davemloft.net> Cc: Gregory CLEMENT <gregory.clement@free-electrons.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Richard Cochran <rcochran@linutronix.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Fixes: cb5ff2d245c1 ("irqchip/armada-370-xp: Convert to hotplug state machine") Link: http://lkml.kernel.org/r/20160718160335.3134412-1-arnd@arndb.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-02 18:39:30 +0300