summaryrefslogtreecommitdiff
path: root/drivers/irqchip
AgeCommit message (Collapse)AuthorFilesLines
2020-09-03irqchip/stm32-exti: Avoid losing interrupts due to clearing pending bits by ↵qiuguorui11-2/+12
mistake commit e579076ac0a3bebb440fab101aef3c42c9f4c709 upstream. In the current code, when the eoi callback of the exti clears the pending bit of the current interrupt, it will first read the values of fpr and rpr, then logically OR the corresponding bit of the interrupt number, and finally write back to fpr and rpr. We found through experiments that if two exti interrupts, we call them int1/int2, arrive almost at the same time. in our scenario, the time difference is 30 microseconds, assuming int1 is triggered first. there will be an extreme scenario: both int's pending bit are set to 1, the irq handle of int1 is executed first, and eoi handle is then executed, at this moment, all pending bits are cleared, but the int 2 has not finally been reported to the cpu yet, which eventually lost int2. According to stm32's TRM description about rpr and fpr: Writing a 1 to this bit will trigger a rising edge event on event x, Writing 0 has no effect. Therefore, when clearing the pending bit, we only need to clear the pending bit of the irq. Fixes: 927abfc4461e7 ("irqchip/stm32: Add stm32mp1 support with hierarchy domain") Signed-off-by: qiuguorui1 <qiuguorui1@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Cc: stable@vger.kernel.org # v4.18+ Link: https://lore.kernel.org/r/20200820031629.15582-1-qiuguorui1@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-21genirq/affinity: Make affinity setting if activated opt-inThomas Gleixner1-1/+4
commit f0c7baca180046824e07fc5f1326e83a8fd150c7 upstream. John reported that on a RK3288 system the perf per CPU interrupts are all affine to CPU0 and provided the analysis: "It looks like what happens is that because the interrupts are not per-CPU in the hardware, armpmu_request_irq() calls irq_force_affinity() while the interrupt is deactivated and then request_irq() with IRQF_PERCPU | IRQF_NOBALANCING. Now when irq_startup() runs with IRQ_STARTUP_NORMAL, it calls irq_setup_affinity() which returns early because IRQF_PERCPU and IRQF_NOBALANCING are set, leaving the interrupt on its original CPU." This was broken by the recent commit which blocked interrupt affinity setting in hardware before activation of the interrupt. While this works in general, it does not work for this particular case. As contrary to the initial analysis not all interrupt chip drivers implement an activate callback, the safe cure is to make the deferred interrupt affinity setting at activation time opt-in. Implement the necessary core logic and make the two irqchip implementations for which this is required opt-in. In hindsight this would have been the right thing to do, but ... Fixes: baedb87d1b53 ("genirq/affinity: Handle affinity setting on inactive interrupts correctly") Reported-by: John Keeping <john@metanate.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Marc Zyngier <maz@kernel.org> Acked-by: Marc Zyngier <maz@kernel.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/87blk4tzgm.fsf@nanos.tec.linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-19irqchip/irq-mtk-sysirq: Replace spinlock with raw_spinlockBartosz Golaszewski1-4/+4
[ Upstream commit 6eeb997ab5075e770a002c51351fa4ec2c6b5c39 ] This driver may take a regular spinlock when a raw spinlock (irq_desc->lock) is already taken which results in the following lockdep splat: ============================= [ BUG: Invalid wait context ] 5.7.0-rc7 #1 Not tainted ----------------------------- swapper/0/0 is trying to lock: ffffff800303b798 (&chip_data->lock){....}-{3:3}, at: mtk_sysirq_set_type+0x48/0xc0 other info that might help us debug this: context-{5:5} 2 locks held by swapper/0/0: #0: ffffff800302ee68 (&desc->request_mutex){....}-{4:4}, at: __setup_irq+0xc4/0x8a0 #1: ffffff800302ecf0 (&irq_desc_lock_class){....}-{2:2}, at: __setup_irq+0xe4/0x8a0 stack backtrace: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.7.0-rc7 #1 Hardware name: Pumpkin MT8516 (DT) Call trace: dump_backtrace+0x0/0x180 show_stack+0x14/0x20 dump_stack+0xd0/0x118 __lock_acquire+0x8c8/0x2270 lock_acquire+0xf8/0x470 _raw_spin_lock_irqsave+0x50/0x78 mtk_sysirq_set_type+0x48/0xc0 __irq_set_trigger+0x58/0x170 __setup_irq+0x420/0x8a0 request_threaded_irq+0xd8/0x190 timer_of_init+0x1e8/0x2c4 mtk_gpt_init+0x5c/0x1dc timer_probe+0x74/0xf4 time_init+0x14/0x44 start_kernel+0x394/0x4f0 Replace the spinlock_t with raw_spinlock_t to avoid this warning. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200615074445.3579-1-brgl@bgdev.pl Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-19irqchip/ti-sci-inta: Fix return value about devm_ioremap_resource()Tiezhu Yang1-1/+1
[ Upstream commit 4b127a14cb1385dd355c7673d975258d5d668922 ] When call function devm_ioremap_resource(), we should use IS_ERR() to check the return value and return PTR_ERR() if failed. Fixes: 9f1463b86c13 ("irqchip/ti-sci-inta: Add support for Interrupt Aggregator driver") Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Link: https://lore.kernel.org/r/1591437017-5295-2-git-send-email-yangtiezhu@loongson.cn Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-09irqchip/gic: Atomically update affinityMarc Zyngier1-11/+3
commit 005c34ae4b44f085120d7f371121ec7ded677761 upstream. The GIC driver uses a RMW sequence to update the affinity, and relies on the gic_lock_irqsave/gic_unlock_irqrestore sequences to update it atomically. But these sequences only expand into anything meaningful if the BL_SWITCHER option is selected, which almost never happens. It also turns out that using a RMW and locks is just as silly, as the GIC distributor supports byte accesses for the GICD_TARGETRn registers, which when used make the update atomic by definition. Drop the terminally broken code and replace it by a byte write. Fixes: 04c8b0f82c7d ("irqchip/gic: Make locking a BL_SWITCHER only feature") Cc: stable@vger.kernel.org Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-23irqchip/mbigen: Free msi_desc on device teardownZenghui Yu1-1/+7
commit edfc23f6f9fdbd7825d50ac1f380243cde19b679 upstream. Using irq_domain_free_irqs_common() on the irqdomain free path will leave the MSI descriptor unfreed when platform devices get removed. Properly free it by MSI domain free function. Fixes: 9650c60ebfec0 ("irqchip/mbigen: Create irq domain for each mbigen device") Signed-off-by: Zenghui Yu <yuzenghui@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200408114352.1604-1-yuzenghui@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-21irqchip/ti-sci-inta: Fix processing of masked irqsGrygorii Strashko1-1/+2
commit 3688b0db5c331f4ec3fa5eb9f670a4b04f530700 upstream. The ti_sci_inta_irq_handler() does not take into account INTA IRQs state (masked/unmasked) as it uses INTA_STATUS_CLEAR_j register to get INTA IRQs status, which provides raw status value. This causes hard IRQ handlers to be called or threaded handlers to be scheduled many times even if corresponding INTA IRQ is masked. Above, first of all, affects the LEVEL interrupts processing and causes unexpected behavior up the system stack or crash. Fix it by using the Interrupt Masked Status INTA_STATUSM_j register which provides masked INTA IRQs status. Fixes: 9f1463b86c13 ("irqchip/ti-sci-inta: Add support for Interrupt Aggregator driver") Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Link: https://lore.kernel.org/r/20200408191532.31252-1-grygorii.strashko@ti.com Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-17irqchip/versatile-fpga: Apply clear-mask earlierSungbo Eo1-3/+3
commit 6a214a28132f19ace3d835a6d8f6422ec80ad200 upstream. Clear its own IRQs before the parent IRQ get enabled, so that the remaining IRQs do not accidentally interrupt the parent IRQ controller. This patch also fixes a reboot bug on OX820 SoC, where the remaining rps-timer IRQ raises a GIC interrupt that is left pending. After that, the rps-timer IRQ is cleared during driver initialization, and there's no IRQ left in rps-irq when local_irq_enable() is called, which evokes an error message "unexpected IRQ trap". Fixes: bdd272cbb97a ("irqchip: versatile FPGA: support cascaded interrupts from DT") Signed-off-by: Sungbo Eo <mans0n@gorani.run> Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200321133842.2408823-1-mans0n@gorani.run Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-17irqchip/gic-v4: Provide irq_retrigger to avoid circular locking dependencyMarc Zyngier1-0/+6
[ Upstream commit 7809f7011c3bce650e502a98afeb05961470d865 ] On a very heavily loaded D05 with GICv4, I managed to trigger the following lockdep splat: [ 6022.598864] ====================================================== [ 6022.605031] WARNING: possible circular locking dependency detected [ 6022.611200] 5.6.0-rc4-00026-geee7c7b0f498 #680 Tainted: G E [ 6022.618061] ------------------------------------------------------ [ 6022.624227] qemu-system-aar/7569 is trying to acquire lock: [ 6022.629789] ffff042f97606808 (&p->pi_lock){-.-.}, at: try_to_wake_up+0x54/0x7a0 [ 6022.637102] [ 6022.637102] but task is already holding lock: [ 6022.642921] ffff002fae424cf0 (&irq_desc_lock_class){-.-.}, at: __irq_get_desc_lock+0x5c/0x98 [ 6022.651350] [ 6022.651350] which lock already depends on the new lock. [ 6022.651350] [ 6022.659512] [ 6022.659512] the existing dependency chain (in reverse order) is: [ 6022.666980] [ 6022.666980] -> #2 (&irq_desc_lock_class){-.-.}: [ 6022.672983] _raw_spin_lock_irqsave+0x50/0x78 [ 6022.677848] __irq_get_desc_lock+0x5c/0x98 [ 6022.682453] irq_set_vcpu_affinity+0x40/0xc0 [ 6022.687236] its_make_vpe_non_resident+0x6c/0xb8 [ 6022.692364] vgic_v4_put+0x54/0x70 [ 6022.696273] vgic_v3_put+0x20/0xd8 [ 6022.700183] kvm_vgic_put+0x30/0x48 [ 6022.704182] kvm_arch_vcpu_put+0x34/0x50 [ 6022.708614] kvm_sched_out+0x34/0x50 [ 6022.712700] __schedule+0x4bc/0x7f8 [ 6022.716697] schedule+0x50/0xd8 [ 6022.720347] kvm_arch_vcpu_ioctl_run+0x5f0/0x978 [ 6022.725473] kvm_vcpu_ioctl+0x3d4/0x8f8 [ 6022.729820] ksys_ioctl+0x90/0xd0 [ 6022.733642] __arm64_sys_ioctl+0x24/0x30 [ 6022.738074] el0_svc_common.constprop.3+0xa8/0x1e8 [ 6022.743373] do_el0_svc+0x28/0x88 [ 6022.747198] el0_svc+0x14/0x40 [ 6022.750761] el0_sync_handler+0x124/0x2b8 [ 6022.755278] el0_sync+0x140/0x180 [ 6022.759100] [ 6022.759100] -> #1 (&rq->lock){-.-.}: [ 6022.764143] _raw_spin_lock+0x38/0x50 [ 6022.768314] task_fork_fair+0x40/0x128 [ 6022.772572] sched_fork+0xe0/0x210 [ 6022.776484] copy_process+0x8c4/0x18d8 [ 6022.780742] _do_fork+0x88/0x6d8 [ 6022.784478] kernel_thread+0x64/0x88 [ 6022.788563] rest_init+0x30/0x270 [ 6022.792390] arch_call_rest_init+0x14/0x1c [ 6022.796995] start_kernel+0x498/0x4c4 [ 6022.801164] [ 6022.801164] -> #0 (&p->pi_lock){-.-.}: [ 6022.806382] __lock_acquire+0xdd8/0x15c8 [ 6022.810813] lock_acquire+0xd0/0x218 [ 6022.814896] _raw_spin_lock_irqsave+0x50/0x78 [ 6022.819761] try_to_wake_up+0x54/0x7a0 [ 6022.824018] wake_up_process+0x1c/0x28 [ 6022.828276] wakeup_softirqd+0x38/0x40 [ 6022.832533] __tasklet_schedule_common+0xc4/0xf0 [ 6022.837658] __tasklet_schedule+0x24/0x30 [ 6022.842176] check_irq_resend+0xc8/0x158 [ 6022.846609] irq_startup+0x74/0x128 [ 6022.850606] __enable_irq+0x6c/0x78 [ 6022.854602] enable_irq+0x54/0xa0 [ 6022.858431] its_make_vpe_non_resident+0xa4/0xb8 [ 6022.863557] vgic_v4_put+0x54/0x70 [ 6022.867469] kvm_arch_vcpu_blocking+0x28/0x38 [ 6022.872336] kvm_vcpu_block+0x48/0x490 [ 6022.876594] kvm_handle_wfx+0x18c/0x310 [ 6022.880938] handle_exit+0x138/0x198 [ 6022.885022] kvm_arch_vcpu_ioctl_run+0x4d4/0x978 [ 6022.890148] kvm_vcpu_ioctl+0x3d4/0x8f8 [ 6022.894494] ksys_ioctl+0x90/0xd0 [ 6022.898317] __arm64_sys_ioctl+0x24/0x30 [ 6022.902748] el0_svc_common.constprop.3+0xa8/0x1e8 [ 6022.908046] do_el0_svc+0x28/0x88 [ 6022.911871] el0_svc+0x14/0x40 [ 6022.915434] el0_sync_handler+0x124/0x2b8 [ 6022.919951] el0_sync+0x140/0x180 [ 6022.923773] [ 6022.923773] other info that might help us debug this: [ 6022.923773] [ 6022.931762] Chain exists of: [ 6022.931762] &p->pi_lock --> &rq->lock --> &irq_desc_lock_class [ 6022.931762] [ 6022.942101] Possible unsafe locking scenario: [ 6022.942101] [ 6022.948007] CPU0 CPU1 [ 6022.952523] ---- ---- [ 6022.957039] lock(&irq_desc_lock_class); [ 6022.961036] lock(&rq->lock); [ 6022.966595] lock(&irq_desc_lock_class); [ 6022.973109] lock(&p->pi_lock); [ 6022.976324] [ 6022.976324] *** DEADLOCK *** This is happening because we have a pending doorbell that requires retrigger. As SW retriggering is done in a tasklet, we trigger the circular dependency above. The easy cop-out is to provide a retrigger callback that doesn't require acquiring any extra lock. Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200310184921.23552-5-maz@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-04-17irqchip/versatile-fpga: Handle chained IRQs properlySungbo Eo1-2/+10
[ Upstream commit 486562da598c59e9f835b551d7cf19507de2d681 ] Enclose the chained handler with chained_irq_{enter,exit}(), so that the muxed interrupts get properly acked. This patch also fixes a reboot bug on OX820 SoC, where the jiffies timer interrupt is never acked. The kernel waits a clock tick forever in calibrate_delay_converge(), which leads to a boot hang. Fixes: c41b16f8c9d9 ("ARM: integrator/versatile: consolidate FPGA IRQ handling code") Signed-off-by: Sungbo Eo <mans0n@gorani.run> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200319023448.1479701-1-mans0n@gorani.run Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-02-24irqchip/gic-v3-its: Reference to its_invall_cmd descriptor when building INVALLZenghui Yu1-1/+1
[ Upstream commit 107945227ac5d4c37911c7841b27c64b489ce9a9 ] It looks like an obvious mistake to use its_mapc_cmd descriptor when building the INVALL command block. It so far worked by luck because both its_mapc_cmd.col and its_invall_cmd.col sit at the same offset of the ITS command descriptor, but we should not rely on it. Fixes: cc2d3216f53c ("irqchip: GICv3: ITS command queue") Signed-off-by: Zenghui Yu <yuzenghui@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20191202071021.1251-1-yuzenghui@huawei.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-02-24irqchip/gic-v3: Only provision redistributors that are enabled in ACPIMarc Zyngier1-2/+7
[ Upstream commit 926b5dfa6b8dc666ff398044af6906b156e1d949 ] We currently allocate redistributor region structures for individual redistributors when ACPI doesn't present us with compact MMIO regions covering multiple redistributors. It turns out that we allocate these structures even when the redistributor is flagged as disabled by ACPI. It works fine until someone actually tries to tarse one of these structures, and access the corresponding MMIO region. Instead, track the number of enabled redistributors, and only allocate what is required. This makes sure that there is no invalid data to misuse. Signed-off-by: Marc Zyngier <maz@kernel.org> Reported-by: Heyi Guo <guoheyi@huawei.com> Tested-by: Heyi Guo <guoheyi@huawei.com> Link: https://lore.kernel.org/r/20191216062745.63397-1-guoheyi@huawei.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-02-24irqchip/mbigen: Set driver .suppress_bind_attrs to avoid remove problemsJohn Garry1-0/+1
[ Upstream commit d6152e6ec9e2171280436f7b31a571509b9287e1 ] The following crash can be seen for setting CONFIG_DEBUG_TEST_DRIVER_REMOVE=y for DT FW (which some people still use): Hisilicon MBIGEN-V2 60080000.interrupt-controller: Failed to create mbi-gen irqdomain Hisilicon MBIGEN-V2: probe of 60080000.interrupt-controller failed with error -12 [...] Unable to handle kernel paging request at virtual address 0000000000005008 Mem abort info: ESR = 0x96000004 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000004 CM = 0, WnR = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=0000041fb9990000 [0000000000005008] pgd=0000000000000000 Internal error: Oops: 96000004 [#1] PREEMPT SMP Modules linked in: CPU: 7 PID: 1 Comm: swapper/0 Not tainted 5.5.0-rc6-00002-g3fc42638a506-dirty #1622 Hardware name: Huawei Taishan 2280 /D05, BIOS Hisilicon D05 IT21 Nemo 2.0 RC0 04/18/2018 pstate: 40000085 (nZcv daIf -PAN -UAO) pc : mbigen_set_type+0x38/0x60 lr : __irq_set_trigger+0x6c/0x188 sp : ffff800014b4b400 x29: ffff800014b4b400 x28: 0000000000000007 x27: 0000000000000000 x26: 0000000000000000 x25: ffff041fd83bd0d4 x24: ffff041fd83bd188 x23: 0000000000000000 x22: ffff80001193ce00 x21: 0000000000000004 x20: 0000000000000000 x19: ffff041fd83bd000 x18: ffffffffffffffff x17: 0000000000000000 x16: 0000000000000000 x15: ffff8000119098c8 x14: ffff041fb94ec91c x13: ffff041fb94ec1a1 x12: 0000000000000030 x11: 0101010101010101 x10: 0000000000000040 x9 : 0000000000000000 x8 : ffff041fb98c6680 x7 : ffff800014b4b380 x6 : ffff041fd81636c8 x5 : 0000000000000000 x4 : 000000000000025f x3 : 0000000000005000 x2 : 0000000000005008 x1 : 0000000000000004 x0 : 0000000080000000 Call trace: mbigen_set_type+0x38/0x60 __setup_irq+0x744/0x900 request_threaded_irq+0xe0/0x198 pcie_pme_probe+0x98/0x118 pcie_port_probe_service+0x38/0x78 really_probe+0xa0/0x3e0 driver_probe_device+0x58/0x100 __device_attach_driver+0x90/0xb0 bus_for_each_drv+0x64/0xc8 __device_attach+0xd8/0x138 device_initial_probe+0x10/0x18 bus_probe_device+0x90/0x98 device_add+0x4c4/0x770 device_register+0x1c/0x28 pcie_port_device_register+0x1e4/0x4f0 pcie_portdrv_probe+0x34/0xd8 local_pci_probe+0x3c/0xa0 pci_device_probe+0x128/0x1c0 really_probe+0xa0/0x3e0 driver_probe_device+0x58/0x100 __device_attach_driver+0x90/0xb0 bus_for_each_drv+0x64/0xc8 __device_attach+0xd8/0x138 device_attach+0x10/0x18 pci_bus_add_device+0x4c/0xb8 pci_bus_add_devices+0x38/0x88 pci_host_probe+0x3c/0xc0 pci_host_common_probe+0xf0/0x208 hisi_pcie_almost_ecam_probe+0x24/0x30 platform_drv_probe+0x50/0xa0 really_probe+0xa0/0x3e0 driver_probe_device+0x58/0x100 device_driver_attach+0x6c/0x90 __driver_attach+0x84/0xc8 bus_for_each_dev+0x74/0xc8 driver_attach+0x20/0x28 bus_add_driver+0x148/0x1f0 driver_register+0x60/0x110 __platform_driver_register+0x40/0x48 hisi_pcie_almost_ecam_driver_init+0x1c/0x24 The specific problem here is that the mbigen driver real probe has failed as the mbigen_of_create_domain()->of_platform_device_create() call fails, the reason for that being that we never destroyed the platform device created during the remove test dry run and there is some conflict. Since we generally would never want to unbind this driver, and to save adding a driver tear down path for that, just set the driver .suppress_bind_attrs member to avoid this possibility. Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Hanjun Guo <guohanjun@huawei.com> Link: https://lore.kernel.org/r/1579196323-180137-1-git-send-email-john.garry@huawei.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-23irqchip: Place CONFIG_SIFIVE_PLIC into the menuJonathan Neuschäfer1-2/+2
commit 0149385537e6d36f535fcd83cfcabf83a32f0836 upstream. Somehow CONFIG_SIFIVE_PLIC ended up outside of the "IRQ chip support" menu. Fixes: 8237f8bc4f6e ("irqchip: add a SiFive PLIC driver") Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Palmer Dabbelt <palmer@sifive.com> Acked-by: Palmer Dabbelt <palmer@sifive.com> Link: https://lore.kernel.org/r/20191002144452.10178-1-j.neuschaefer@gmx.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-04irqchip: ingenic: Error out if IRQ domain creation failedPaul Cercueil1-5/+10
[ Upstream commit 52ecc87642f273a599c9913b29fd179c13de457b ] If we cannot create the IRQ domain, the driver should fail to probe instead of succeeding with just a warning message. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/1570015525-27018-3-git-send-email-zhouyanjie@zoho.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-04irqchip/irq-bcm7038-l1: Enable parent IRQ if necessaryFlorian Fainelli1-0/+4
[ Upstream commit 27eebb60357ed5aa6659442f92907c0f7368d6ae ] If the 'brcm,irq-can-wake' property is specified, make sure we also enable the corresponding parent interrupt we are attached to. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20191024201415.23454-4-f.fainelli@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-10-25Merge tag 'irqchip-fixes-5.4-2' of ↵Thomas Gleixner2-5/+20
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent Pull the second lot of irqchip updates for 5.4 from Marc Zyngier: - Sifive PLIC: force driver to skip non-relevant contexts - GICv4: Don't send VMOVP commands to ITSs that don't have this vPE mapped
2019-10-25irqchip/sifive-plic: Skip contexts except supervisor in plic_init()Alan Mikhak1-2/+2
Modify plic_init() to skip .dts interrupt contexts other than supervisor external interrupt. The .dts entry for plic may specify multiple interrupt contexts. For example, it may assign two entries IRQ_M_EXT and IRQ_S_EXT, in that order, to the same interrupt controller. This patch modifies plic_init() to skip the IRQ_M_EXT context since IRQ_S_EXT is currently the only supported context. If IRQ_M_EXT is not skipped, plic_init() will report "handler already present for context" when it comes across the IRQ_S_EXT context in the next iteration of its loop. Without this patch, .dts would have to be edited to replace the value of IRQ_M_EXT with -1 for it to be skipped. Signed-off-by: Alan Mikhak <alan.mikhak@sifive.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Paul Walmsley <paul.walmsley@sifive.com> # arch/riscv Link: https://lkml.kernel.org/r/1571933503-21504-1-git-send-email-alan.mikhak@sifive.com
2019-10-24irqchip/gic-v3-its: Use the exact ITSList for VMOVPZenghui Yu1-3/+18
On a system without Single VMOVP support (say GITS_TYPER.VMOVP == 0), we will map vPEs only on ITSs that will actually control interrupts for the given VM. And when moving a vPE, the VMOVP command will be issued only for those ITSs. But when issuing VMOVPs we seemed fail to present the exact ITSList to ITSs who are actually included in the synchronization operation. The its_list_map we're currently using includes all ITSs in the system, even though some of them don't have the corresponding vPE mapping at all. Introduce get_its_list() to get the per-VM its_list_map, to indicate which ITSs have vPE mappings for the given VM, and use this map as the expected ITSList when building VMOVP. This is hopefully a performance gain not to do some synchronization with those unsuspecting ITSs. And initialize the whole command descriptor to zero at beginning, since the seq_num and its_list should be RES0 when GITS_TYPER.VMOVP == 1. Signed-off-by: Zenghui Yu <yuzenghui@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/1571802386-2680-1-git-send-email-yuzenghui@huawei.com
2019-10-14Merge tag 'irqchip-fixes-5.4-1' of ↵Thomas Gleixner4-15/+38
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent Pull irqchip fixes from Marc Zyngier: - Add retrigger support to Amazon's al-fic driver - Add SAM9X60 support to Atmel's AIC5 irqchip - Fix GICv3 maximum interrupt calculation - Convert SiFive's PLIC to the fasteoi IRQ flow
2019-09-22Merge tag 'mips_5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linuxLinus Torvalds3-0/+195
Pull MIPS updates from Paul Burton: "Main MIPS changes: - boot_mem_map is removed, providing a nice cleanup made possible by the recent removal of bootmem. - Some fixes to atomics, in general providing compiler barriers for smp_mb__{before,after}_atomic plus fixes specific to Loongson CPUs or MIPS32 systems using cmpxchg64(). - Conversion to the new generic VDSO infrastructure courtesy of Vincenzo Frascino. - Removal of undefined behavior in set_io_port_base(), fixing the behavior of some MIPS kernel configurations when built with recent clang versions. - Initial MIPS32 huge page support, functional on at least Ingenic SoCs. - pte_special() is now supported for some configurations, allowing among other things generic fast GUP to be used. - Miscellaneous fixes & cleanups. And platform specific changes: - Major improvements to Ingenic SoC support from Paul Cercueil, mostly enabled by the inclusion of the new TCU (timer-counter unit) drivers he's spent a very patient year or so working on. Plus some fixes for X1000 SoCs from Zhou Yanjie. - Netgear R6200 v1 systems are now supported by the bcm47xx platform. - DT updates for BMIPS, Lantiq & Microsemi Ocelot systems" * tag 'mips_5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (89 commits) MIPS: Detect bad _PFN_SHIFT values MIPS: Disable pte_special() for MIPS32 with RiXi MIPS: ralink: deactivate PCI support for SOC_MT7621 mips: compat: vdso: Use legacy syscalls as fallback MIPS: Drop Loongson _CACHE_* definitions MIPS: tlbex: Remove cpu_has_local_ebase MIPS: tlbex: Simplify r3k check MIPS: Select R3k-style TLB in Kconfig MIPS: PCI: refactor ioc3 special handling mips: remove ioremap_cachable mips/atomic: Fix smp_mb__{before,after}_atomic() mips/atomic: Fix loongson_llsc_mb() wreckage mips/atomic: Fix cmpxchg64 barriers MIPS: Octeon: remove duplicated include from dma-octeon.c firmware: bcm47xx_nvram: Allow COMPILE_TEST firmware: bcm47xx_nvram: Correct size_t printf format MIPS: Treat Loongson Extensions as ASEs MIPS: Remove dev_err() usage after platform_get_irq() MIPS: dts: mscc: describe the PTP ready interrupt MIPS: dts: mscc: describe the PTP register range ...
2019-09-18irqchip/sifive-plic: Switch to fasteoi flowMarc Zyngier1-14/+15
The SiFive PLIC interrupt controller seems to have all the HW features to support the fasteoi flow, but the driver seems to be stuck in a distant past. Bring it into the 21st century. Signed-off-by: Marc Zyngier <maz@kernel.org> Tested-by: Palmer Dabbelt <palmer@sifive.com> (QEMU Boot) Tested-by: Darius Rad <darius@bluespec.com> (on 2 HW PLIC implementations) Tested-by: Paul Walmsley <paul.walmsley@sifive.com> (HiFive Unleashed) Reviewed-by: Palmer Dabbelt <palmer@sifive.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/8636gxskmj.wl-maz@kernel.org
2019-09-18irqchip/gic-v3: Fix GIC_LINE_NR accessorZenghui Yu1-1/+1
As per GIC spec, ITLinesNumber indicates the maximum SPI INTID that the GIC implementation supports. And the maximum SPI INTID an implementation might support is 1019 (field value 11111). max(GICD_TYPER_SPIS(...), 1020) is not what we actually want for GIC_LINE_NR. Fix it to min(GICD_TYPER_SPIS(...), 1020). Signed-off-by: Zenghui Yu <yuzenghui@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/1568789850-14080-1-git-send-email-yuzenghui@huawei.com
2019-09-17Merge branch 'irq-core-for-linus' of ↵Linus Torvalds14-153/+466
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull core irq updates from Thomas Gleixner: "Updates from the irq departement: - Update the interrupt spreading code so it handles numa node with different CPU counts properly. - A large overhaul of the ARM GiCv3 driver to support new PPI and SPI ranges. - Conversion of all alloc_fwnode() users to use physical addresses instead of virtual addresses so the virtual addresses are not leaked. The physical address is sufficient to identify the associated interrupt chip. - Add support for Marvel MMP3, Amlogic Meson SM1 interrupt chips. - Enforce interrupt threading at compile time if RT is enabled. - Small updates and improvements all over the place" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (37 commits) irqchip/gic-v3-its: Fix LPI release for Multi-MSI devices irqchip/uniphier-aidet: Use devm_platform_ioremap_resource() irqdomain: Add the missing assignment of domain->fwnode for named fwnode irqchip/mmp: Coexist with GIC root IRQ controller irqchip/mmp: Mask off interrupts from other cores irqchip/mmp: Add missing chained_irq_{enter,exit}() irqchip/mmp: Do not use of_address_to_resource() to get mux regs irqchip/meson-gpio: Add support for meson sm1 SoCs dt-bindings: interrupt-controller: New binding for the meson sm1 SoCs genirq/affinity: Remove const qualifier from node_to_cpumask argument genirq/affinity: Spread vectors on node according to nr_cpu ratio genirq/affinity: Improve __irq_build_affinity_masks() irqchip: Remove dev_err() usage after platform_get_irq() irqchip: Add include guard to irq-partition-percpu.h irqchip/mmp: Do not call irq_set_default_host() on DT platforms irqchip/gic-v3-its: Remove the redundant set_bit for lpi_map irqchip/gic-v3: Add quirks for HIP06/07 invalid GICD_TYPER erratum 161010803 irqchip/gic: Skip DT quirks when evaluating IIDR-based quirks irqchip/gic-v3: Warn about inconsistent implementations of extended ranges irqchip/gic-v3: Add EPPI range support ...
2019-09-09irqchip/atmel-aic5: Add support for sam9x60 irqchipSandeep Sheriker Mallikarjun1-0/+10
Add support for SAM9X60 irqchip. Signed-off-by: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/1568026835-6646-1-git-send-email-claudiu.beznea@microchip.com [claudiu.beznea@microchip.com: update aic5_irq_fixups[], update documentation]
2019-09-09irqchip/al-fic: Add support for irq retriggerTalel Shenhar1-0/+12
Introduce interrupts retrigger support for Amazon's Annapurna Labs Fabric Interrupt Controller. Signed-off-by: Talel Shenhar <talel@amazon.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/1568018358-18985-1-git-send-email-talel@amazon.com
2019-09-05irqchip/gic-v3-its: Fix LPI release for Multi-MSI devicesMarc Zyngier1-5/+4
When allocating a range of LPIs for a Multi-MSI capable device, this allocation extended to the closest power of 2. But on the release path, the interrupts are released one by one. This results in not releasing the "extra" range, leaking the its_device. Trying to reprobe the device will then fail. Fix it by releasing the LPIs the same way we allocate them. Fixes: 8208d1708b88 ("irqchip/gic-v3-its: Align PCI Multi-MSI allocation on their size") Reported-by: Jiaxing Luo <luojiaxing@huawei.com> Tested-by: John Garry <john.garry@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/f5e948aa-e32f-3f74-ae30-31fee06c2a74@huawei.com
2019-09-05irqchip/sifive-plic: set max threshold for ignored handlersChristoph Hellwig1-2/+10
When running in M-mode, the S-mode plic handlers are still listed in the device tree. Ignore them by setting the maximum threshold. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
2019-09-05irqchip/uniphier-aidet: Use devm_platform_ioremap_resource()Masahiro Yamada1-3/+1
Replace the chain of platform_get_resource() and devm_ioremap_resource() with devm_platform_ioremap_resource(). This allows to remove the local variable for (struct resource *), and have one function call less. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20190905034932.12587-1-yamada.masahiro@socionext.com
2019-08-30irqchip/mmp: Coexist with GIC root IRQ controllerLubomir Rintel1-1/+6
On MMP3, the GIC can be set as a root IRQ interrupt controller. If the device tree indicated that GIC is enabled, avoid hooking up mmp2_handle_irq(). The interrupt muxes are still being used. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20190822092643.593488-10-lkundrak@v3.sk
2019-08-30irqchip/mmp: Mask off interrupts from other coresAndres Salomon1-0/+48
On mmp3, there's an extra set of ICU registers (ICU2) that handle interrupts on the extra cores. When masking off interrupts on MP1, these should be masked as well. We add a new interrupt controller via device tree to identify when we're looking at an mmp3 machine via compatible field of "marvell,mmp3-intc". [lkundrak@v3.sk: Changed "mrvl,mmp3-intc" compatible strings to "marvell,mmp3-intc". Tidied up the subject line a bit.] Signed-off-by: Andres Salomon <dilinger@queued.net> Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20190822092643.593488-9-lkundrak@v3.sk -- Changes since v1: - Moved mmp3-specific mmp_icu2_base initialization from mmp_init_bases() to mmp3_of_init() so that we don't have to check for marvell,mmp3-intc compatibility twice. - Drop an superfluous call to irq_set_default_host() arch/arm/mach-mmp/regs-icu.h | 3 +++ drivers/irqchip/irq-mmp.c | 48 ++++++++++++++++++++++++++++++++++++ 2 files changed, 51 insertions(+) Signed-off-by: Andres Salomon <dilinger@queued.net> Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20190822092643.593488-9-lkundrak@v3.sk
2019-08-30irqchip/mmp: Add missing chained_irq_{enter,exit}()Lubomir Rintel1-1/+8
The lack of chained_irq_exit() leaves the muxed interrupt masked on MMP3. For reasons unknown this is not a problem on MMP2. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20190822092643.593488-8-lkundrak@v3.sk
2019-08-30irqchip/mmp: Do not use of_address_to_resource() to get mux regsLubomir Rintel1-9/+13
The "regs" property of the "mrvl,mmp2-mux-intc" devices are silly. They are offsets from intc's base, not addresses on the parent bus. At this point it probably can't be fixed. On an OLPC XO-1.75 machine, the muxes are children of the intc, not the axi bus, and thus of_address_to_resource() won't work. We should treat the values as mere integers as opposed to bus addresses. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Marc Zyngier <maz@kernel.org> Acked-by: Pavel Machek <pavel@ucw.cz> Link: https://lore.kernel.org/r/20190822092643.593488-7-lkundrak@v3.sk
2019-08-30irqchip/meson-gpio: Add support for meson sm1 SoCsJerome Brunet1-14/+38
The meson sm1 SoCs uses the same type of GPIO interrupt controller IP block as the other meson SoCs, A total of 100 pins can be spied on: - 223:100 undefined (no interrupt) - 99:97 3 pins on bank GPIOE - 96:77 20 pins on bank GPIOX - 76:61 16 pins on bank GPIOA - 60:53 8 pins on bank GPIOC - 52:37 16 pins on bank BOOT - 36:28 9 pins on bank GPIOH - 27:12 16 pins on bank GPIOZ - 11:0 12 pins in the AO domain Mapping is the same as the g12a family but the sm1 controller allows to trig an irq on both edges of the input signal. This was not possible with the previous SoCs families Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Tested-by: Kevin Hilman <khilman@baylibre.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20190829161635.25067-3-jbrunet@baylibre.com
2019-08-20irqchip: Remove dev_err() usage after platform_get_irq()Stephen Boyd3-12/+4
We don't need dev_err() messages when platform_get_irq() fails now that platform_get_irq() prints an error message itself when something goes wrong. Let's remove these prints with a simple semantic patch. // <smpl> @@ expression ret; struct platform_device *E; @@ ret = ( platform_get_irq(E, ...) | platform_get_irq_byname(E, ...) ); if ( \( ret < 0 \| ret <= 0 \) ) { ( -if (ret != -EPROBE_DEFER) -{ ... -dev_err(...); -... } | ... -dev_err(...); ) ... } // </smpl> While we're here, remove braces on if statements that only have one statement (manually). Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-08-20irqchip/mmp: Do not call irq_set_default_host() on DT platformsLubomir Rintel1-2/+0
Using a default domain on DT platforms is unnecessary, as the firmware tables describe the full topology, and nothing is implicit. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> [maz: wrote an actual changelog] Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-08-20irqchip/gic-v3-its: Remove the redundant set_bit for lpi_mapZenghui Yu1-1/+1
We try to find a free LPI region in device's lpi_map and allocate them (set them to 1) when we want to allocate LPIs for this device. This is what bitmap_find_free_region() has done for us. The following set_bit is redundant and a bit confusing (since we only set_bit against the first allocated LPI idx). Remove it, and make the set_bit explicit by comment. Signed-off-by: Zenghui Yu <yuzenghui@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-08-20irqchip/gic-v3: Add quirks for HIP06/07 invalid GICD_TYPER erratum 161010803Marc Zyngier1-10/+46
It looks like the HIP06/07 SoCs have extra bits in their GICD_TYPER registers, which confuse the GICv3.1 code (these systems appear to expose ESPIs while they actually don't). Detect these systems as early as possible and wipe the fields that should be RES0 in the register. Tested-by: John Garry <john.garry@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-08-20irqchip/gic: Skip DT quirks when evaluating IIDR-based quirksMarc Zyngier1-0/+2
When evaluating potential quirks matched by reads of the IIDR register, skip the quirk entries that use a "compatible" property attached to them, as these are DT based. Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-08-20irqchip/gic-v3: Warn about inconsistent implementations of extended rangesMarc Zyngier1-0/+5
As is it usual for the GIC, it isn't disallowed to put together a system that is majorly inconsistent, with a distributor supporting the extended ranges while some of the CPUs don't. Kindly tell the user that things are sailing isn't going to be smooth. Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-08-20irqchip/gic-v3: Add EPPI range supportMarc Zyngier1-7/+35
Expand the pre-existing PPI support to be able to deal with the Extended PPI range (EPPI). This includes obtaining the number of PPIs from each individual redistributor, and compute the minimum set (just in case someone builds something really clever...). Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-08-20irqchip/gic-v3: Dynamically allocate PPI partition descriptorsMarc Zyngier1-3/+11
Again, PPIs are becoming a variable set. Let's hack the PPI partition code to make the top-level array dynamically allocated. Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-08-20irqchip/gic-v3: Dynamically allocate PPI NMI refcountsMarc Zyngier1-13/+34
As we're about to have a variable number of PPIs, let's make the allocation of the NMI refcounts dynamic. Also apply some minor cleanups (moving things around). Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-08-20irqchip/gic: Prepare for more than 16 PPIsMarc Zyngier5-17/+30
GICv3.1 allows up to 80 PPIs (16 legaci PPIs and 64 Extended PPIs), meaning we can't just leave the old 16 hardcoded everywhere. We also need to add the infrastructure to discover the number of PPIs on a per redistributor basis, although we still pretend there is only 16 of them for now. No functional change. Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-08-20irqchip/gic-v3: Add ESPI range supportMarc Zyngier1-16/+69
Add the required support for the ESPI range, which behave exactly like the SPIs of old, only with new funky INTIDs. Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-08-20irqchip/gic-v3: Add INTID range and convertion primitivesMarc Zyngier1-29/+83
In the beginning, life was simple. The GIC driver mostly cared about PPIs, SPIs and LPIs, all with nicely layed out ranges. We're about to change all that, with new ranges such as EPPI and ESPI interleaved in the middle of the no-irq-land between the "special IDs" and the LPI range. Boo. In order to make our life less hellish, let's introduce a set of primitives that will allow ranges to be identified easily and offsets to be remapped. So far, there is no functionnal change. Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-08-20irqchip/gic: Rework gic_configure_irq to take the full ICFGR baseMarc Zyngier4-12/+30
gic_configure_irq is currently passed the (re)distributor address, to which it applies an a fixed offset to get to the configuration registers. This offset is constant across all GICs, or rather it was until to v3.1... An easy way out is for the individual drivers to pass the base address of the configuration register for the considered interrupt. At the same time, move part of the error handling back to the individual drivers, as things are about to change on that front. Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-08-20irqchip/irq-ingenic-tcu: Fix COMPILE_TEST buildingYueHaibing1-0/+1
While do COMPILE_TEST building, if GENERIC_IRQ_CHIP is not selected, it fails: drivers/irqchip/irq-ingenic-tcu.o: In function `ingenic_tcu_intc_cascade': irq-ingenic-tcu.c:(.text+0x13f): undefined reference to `irq_get_domain_generic_chip' drivers/irqchip/irq-ingenic-tcu.o: In function `ingenic_tcu_irq_init': irq-ingenic-tcu.c:(.init.text+0x97): undefined reference to `irq_generic_chip_ops' irq-ingenic-tcu.c:(.init.text+0xdd): undefined reference to `__irq_alloc_domain_generic_chips' irq-ingenic-tcu.c:(.init.text+0x10b): undefined reference to `irq_get_domain_generic_chip' select GENERIC_IRQ_CHIP to fix this. Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: 9536eba03ec7 ("irqchip: Add irq-ingenic-tcu driver") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: <jason@lakedaemon.net> Cc: <maz@kernel.org> Cc: <paul@crapouillou.net> Cc: <malat@debian.org> Cc: <linux-kernel@vger.kernel.org> Cc: <linux-mips@vger.kernel.org> Cc: <linux-clk@vger.kernel.org>
2019-08-09irqchip: Add irq-ingenic-tcu driverPaul Cercueil3-0/+194
This driver handles the interrupt controller built in the Timer/Counter Unit (TCU) of the JZ47xx SoCs from Ingenic. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Tested-by: Mathieu Malaterre <malat@debian.org> Tested-by: Artur Rojek <contact@artur-rojek.eu> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Lee Jones <lee.jones@linaro.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-doc@vger.kernel.org Cc: linux-mips@vger.kernel.org Cc: linux-clk@vger.kernel.org Cc: od@zcrc.me
2019-08-07irqchip/ixp4xx: Register the base PA instead of its VA in fwnodeMarc Zyngier1-1/+1
Do not expose the base VA (it appears in debugfs). Instead, record the PA, which at least can be used to precisely identify the associated irqchip and domain. Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Marc Zyngier <maz@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-08 19:33:05 +0300