summaryrefslogtreecommitdiff
path: root/drivers/irqchip
AgeCommit message (Collapse)AuthorFilesLines
2016-02-18irqchip/ts4800: Add hardware dependencyJean Delvare1-0/+1
The Technologic Systems TS-4800 is an i.MX515 board, so its drivers are useless unless building a SOC_IMX51 kernel, except for build testing purposes. Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: Damien Riegel <damien.riegel@savoirfairelinux.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Link: https://lkml.kernel.org/r/20160209111920.1ec318bd@endymion Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2016-02-16irqchip/armada-370-xp: Do not enable it by default when ARCH_MVEBU is selectedGregory CLEMENT1-1/+0
The irq-armada-370-xp driver can only be built for ARM 32 bits. The mvebu family had grown with a new ARM64 SoC which will also select the ARCH_MEVBU configuration. Since "ARM: mvebu: use the ARMADA_370_XP_IRQ option", the ARM32 mvebu SoC directly select this new option. Selecting it by default when ARCH_MEVBU is selected is no more needed. This patch removes this dependency, thanks to this, a kernel for ARM64 mvebu SoC can be built without error due this driver. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Link: https://lkml.kernel.org/r/1454951660-13289-3-git-send-email-gregory.clement@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2016-02-16irqchip/armada-370-xp: Allow allocation of multiple MSIsThomas Petazzoni1-11/+14
Add support for allocating multiple MSIs at the same time, so that the MSI_FLAG_MULTI_PCI_MSI flag can be added to the msi_domain_info structure. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Link: https://lkml.kernel.org/r/1455115621-22846-6-git-send-email-thomas.petazzoni@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2016-02-16irqchip/armada-370-xp: Use shorter names for irq_chipThomas Petazzoni1-3/+3
In order to make the output of /proc/interrupts, use shorter names for the irq_chip registered by the irq-armada-370-xp driver. Using capital letters also matches better what is done for the GIC driver, which uses just "GIC" as the irq_chip->name. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Link: https://lkml.kernel.org/r/1455115621-22846-5-git-send-email-thomas.petazzoni@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2016-02-16irqchip/armada-370-xp: Use PCI_MSI_DOORBELL_START where appropriateThomas Petazzoni1-2/+2
As suggested by Gregory Clement, this commit adjusts the irq-armada-370-xp driver to use the PCI_MSI_DOORBELL_START define in the armada_370_xp_handle_msi_irq() function, rather than hardcoding its value. Suggested-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Link: https://lkml.kernel.org/r/1455115621-22846-4-git-send-email-thomas.petazzoni@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2016-02-16irqchip/armada-370-xp: Use the generic MSI infrastructureThomas Petazzoni2-88/+62
This commit moves the irq-armada-370-xp driver from using the PCI-specific MSI infrastructure to the generic MSI infrastructure, to which drivers are progressively converted. In this hardware, the MSI controller is directly bundled inside the interrupt controller, so we have a single Device Tree node to which multiple IRQ domaines are attached: the wired interrupt domain and the MSI interrupt domain. In order to ensure that they can be differentiated, we have to force the bus_token of the wired interrupt domain to be DOMAIN_BUS_WIRED. The MSI domain bus_token is automatically set to the appropriate value by pci_msi_create_irq_domain(). Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Suggested-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Link: https://lkml.kernel.org/r/1455115621-22846-3-git-send-email-thomas.petazzoni@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2016-02-16irqchip/armada-370-xp: Add Kconfig option for the driverThomas Petazzoni2-1/+6
Instead of building the irq-armada-370-xp driver directly when CONFIG_ARCH_MVEBU is enabled, this commit introduces an intermediate CONFIG_ARMADA_370_XP_IRQ hidden Kconfig option. This allows this option to select other interrupt-related Kconfig options (which will be needed in follow-up commits) rather than having such selects done from arch/arm/mach-<foo>/. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Link: https://lkml.kernel.org/r/1455115621-22846-2-git-send-email-thomas.petazzoni@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2016-02-01Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds5-4/+10
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull IRQ fixes from Ingo Molnar: "Mostly irqchip driver fixes, but also an irq core crash fix and a build fix" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/mxs: Add missing set_handle_irq() irqchip/atmel-aic: Fix wrong bit operation for IRQ priority irqchip/gic-v3-its: Recompute the number of pages on page size change base: Export platform_msi_domain_[alloc,free]_irqs of: MSI: Simplify irqdomain lookup irqdomain: Allow domain lookup with DOMAIN_BUS_WIRED token irqchip: Fix dependencies for archs w/o HAS_IOMEM irqchip/s3c24xx: Mark init_eint as __maybe_unused genirq: Validate action before dereferencing it in handle_irq_event_percpu()
2016-01-29irqchip/mxs: Add missing set_handle_irq()Oleksij Rempel1-0/+1
The rework of the driver missed to move the call to set_handle_irq() into asm9260_of_init(). As a consequence no interrupt entry point is installed and no interrupts are delivered Solution is simple: Install the interrupt entry handler. Fixes: 7e4ac676ee ("irqchip/mxs: Add Alphascale ASM9260 support") Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Cc: kernel@pengutronix.de Cc: jason@lakedaemon.net Cc: marc.zyngier@arm.com Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/1454061473-24957-1-git-send-email-linux@rempel-privat.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-01-27irqchip/atmel-aic: Fix wrong bit operation for IRQ priorityMilo Kim1-1/+1
Atmel AIC has common structure for SMR (Source Mode Register). bit[6:5] Interrupt source type bit[2:0] Priority level Other bits are unused. To update new priority value, bit[2:0] should be cleared first and then new priority level can be written. However, aic_common_set_priority() helper clears source type bits instead of priority bits. This patch fixes wrong mask bit operation. Fixes: b1479ebb7720 "irqchip: atmel-aic: Add atmel AIC/AIC5 drivers" Signed-off-by: Milo Kim <milo.kim@ti.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Ludovic Desroches <ludovic.desroches@atmel.com> Cc: Nicholas Ferre <nicolas.ferre@atmel.com> Cc: stable@vger.kernel.org #v3.17+ Link: http://lkml.kernel.org/r/1452669592-3401-2-git-send-email-milo.kim@ti.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-01-26irqchip/gic-v3-its: Recompute the number of pages on page size changeMarc Zyngier1-2/+6
When the programming of a GITS_BASERn register fails because of an unsupported ITS page size, we retry it with a smaller page size. Unfortunately, we don't recompute the number of allocated ITS pages, indicating the wrong value computed in the original allocation. A convenient fix is to free the pages we allocated, update the page size, and restart the allocation. This will ensure that we always allocate the right amount in the case of a device table, specially if we have to reduce the allocation order to stay within the boundaries of the ITS maximum allocation. Reported-and-tested-by: Ma Jun <majun258@huawei.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Jason Cooper <jason@lakedaemon.net> Link: http://lkml.kernel.org/r/1453818255-1289-1-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-01-26irqchip: Fix dependencies for archs w/o HAS_IOMEMRichard Weinberger1-0/+1
Not every arch has io memory. So, unbreak the build by fixing the dependencies. Signed-off-by: Richard Weinberger <richard@nod.at> Cc: user-mode-linux-devel@lists.sourceforge.net Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Link: http://lkml.kernel.org/r/1453760661-1444-19-git-send-email-richard@nod.at Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-01-26irqchip/s3c24xx: Mark init_eint as __maybe_unusedArnd Bergmann1-1/+1
The init_eint array in the s3c24xx irqchip driver is used by every individual chip variant, but Kconfig allows building the driver when they are all disabled, and that leads to a harmless compile-time warning: drivers/irqchip/irq-s3c24xx.c:608:28: error: 'init_eint' defined but not used [-Werror=unused-variable] This marks the array as __maybe_unused to avoid the warning. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Jason Cooper <jason@lakedaemon.net> Link: http://lkml.kernel.org/r/1453737499-1960073-1-git-send-email-arnd@arndb.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-01-24Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds3-0/+330
Pull MIPS updates from Ralf Baechle: "This is the main pull request for MIPS for 4.5 plus some 4.4 fixes. The executive summary: - ATH79 platform improvments, use DT bindings for the ATH79 USB PHY. - Avoid useless rebuilds for zboot. - jz4780: Add NEMC, BCH and NAND device tree nodes - Initial support for the MicroChip's DT platform. As all the device drivers are missing this is still of limited use. - Some Loongson3 cleanups. - The unavoidable whitespace polishing. - Reduce clock skew when synchronizing the CPU cycle counters on CPU startup. - Add MIPS R6 fixes. - Lots of cleanups across arch/mips as fallout from KVM. - Lots of minor fixes and changes for IEEE 754-2008 support to the FPU emulator / fp-assist software. - Minor Ralink, BCM47xx and bcm963xx platform support improvments. - Support SMP on BCM63168" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (84 commits) MIPS: zboot: Add support for serial debug using the PROM MIPS: zboot: Avoid useless rebuilds MIPS: BMIPS: Enable ARCH_WANT_OPTIONAL_GPIOLIB MIPS: bcm63xx: nvram: Remove unused bcm63xx_nvram_get_psi_size() function MIPS: bcm963xx: Update bcm_tag field image_sequence MIPS: bcm963xx: Move extended flash address to bcm_tag header file MIPS: bcm963xx: Move Broadcom BCM963xx image tag data structure MIPS: bcm63xx: nvram: Use nvram structure definition from header file MIPS: bcm963xx: Add Broadcom BCM963xx board nvram data structure MAINTAINERS: Add KVM for MIPS entry MIPS: KVM: Add missing newline to kvm_err() MIPS: Move KVM specific opcodes into asm/inst.h MIPS: KVM: Use cacheops.h definitions MIPS: Break down cacheops.h definitions MIPS: Use EXCCODE_ constants with set_except_vector() MIPS: Update trap codes MIPS: Move Cause.ExcCode trap codes to mipsregs.h MIPS: KVM: Make kvm_mips_{init,exit}() static MIPS: KVM: Refactor added offsetof()s MIPS: KVM: Convert EXPORT_SYMBOL to _GPL ...
2016-01-24IRQCHIP: irq-pic32-evic: Add support for PIC32 interrupt controllerCristian Birsan3-0/+330
This adds support for the interrupt controller present on PIC32 class devices. It handles all internal and external interrupts. This controller exists outside of the CPU core and is the arbitrator of all interrupts (including interrupts from the CPU itself) before they are presented to the CPU. The following features are supported: - DT properties for EVIC and for devices/peripherals that use interrupt lines - Persistent and non-persistent interrupt handling - irqdomain and generic chip support - Configuration of external interrupt edge polarity Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com> Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12092/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-21Merge tag 'for-4.5' of git://git.osdn.jp/gitroot/uclinux-h8/linuxLinus Torvalds1-5/+5
Pull h8300 updates from Yoshinori Sato: - Add KGDB support - zImage fix - various cleanup * tag 'for-4.5' of git://git.osdn.jp/gitroot/uclinux-h8/linux: h8300: System call entry enable interrupt. h8300: show_stack cleanup h8300: Restraint of warning. h8300: Add KGDB support. irqchip: renesas-h8s: Replace ctrl_outw/ctrl_inw with writew/readw h8300: signal stack fix h8300: Add LZO compression h8300: zImage alignment fix clk: h8300: Remove "sh73a0-" part from compatible value h8300: zImage alignment fix
2016-01-21Merge tag 'armsoc-multiplatform' of ↵Linus Torvalds1-5/+0
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC multiplatform code updates from Arnd Bergmann: "This branch is the culmination of 5 years of effort to bring the ARMv6 and ARMv7 platforms together such that they can all be enabled and boot the same kernel. It has been a tremendous amount of cleanup and refactoring by a huge number of people, and creation of several new (and major) subsystems to better abstract out all the platform details in an appropriate manner. The bulk of this branch is a large patchset from Arnd that brings several of the more minor and older platforms we have closer to multiplatform support. Among these are MMP, S3C64xx, Orion5x, mv78xx0 and realview Much of this is moving around header files from old mach directories, but there are also some cleanup patches of debug_ll (lowlevel debug per-platform options) and other parts. Linus Walleij also has some patchs to clean up the older ARM Realview platforms by finally introducing DT support, and Rob Herring has some for ARM Versatile which is now DT-only. Both of these platforms are now multiplatform. Finally, a couple of patches from Russell for Dove PMU, and a fix from Valentin Rothberg for Exynos ADC, which were rebased on top of the series to avoid conflicts" * tag 'armsoc-multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (75 commits) ARM: realview: don't select SMP_ON_UP for UP builds ARM: s3c: simplify s3c_irqwake_{e,}intallow definition ARM: s3c64xx: fix pm-debug compilation iio: exynos-adc: fix irqf_oneshot.cocci warnings ARM: realview: build realview-dt SMP support only when used ARM: realview: select apropriate targets ARM: realview: clean up header files ARM: realview: make all header files local ARM: no longer make CPU targets visible separately ARM: integrator: use explicit core module options ARM: realview: enable multiplatform ARM: make default platform work for NOMMU ARM: debug-ll: move DEBUG_LL_UART_EFM32 to correct Kconfig location ARM: defconfig: use correct debug_ll settings ARM: versatile: convert to multi-platform ARM: versatile: merge mach code into a single file ARM: versatile: switch to DT only booting and remove legacy code ARM: versatile: add DT based PCI detection ARM: pxa: mark ezx structures as __maybe_unused ARM: pxa: mark raumfeld init functions as __maybe_unused ...
2016-01-20irqchip: renesas-h8s: Replace ctrl_outw/ctrl_inw with writew/readwGuenter Roeck1-5/+5
Commit 13ae42a3b1c1 ("h8300: Rename ctlr_out/in[bwl] to raw_read/write[bwl]") changed the function names, but not all callers, resulting in drivers/irqchip/irq-renesas-h8s.c: In function ‘h8s_disable_irq’: drivers/irqchip/irq-renesas-h8s.c:43:9: error: implicit declaration of function ‘ctrl_inw’ drivers/irqchip/irq-renesas-h8s.c:44:2: error: implicit declaration of function ‘ctrl_outw’ Fixes: 13ae42a3b1c1 ("h8300: Rename ctlr_out/in[bwl] to raw_read/write[bwl]") Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-01-12Merge branch 'irq-core-for-linus' of ↵Linus Torvalds12-109/+840
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq updates from Thomas Gleixner: "The irq department provides: - Support for MSI to wire bridges and a first user of it - More ACPI support for ARM/GIC - A new TS-4800 interrupt controller driver - RCU based free of interrupt descriptors to support the upcoming Intel VMD technology without introducing a locking nightmare - The usual pile of fixes and updates to drivers and core code" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (41 commits) irqchip/omap-intc: Add support for spurious irq handling irqchip/zevio: Use irq_data_get_chip_type() helper irqchip/omap-intc: Remove duplicate setup for IRQ chip type handler irqchip/ts4800: Add TS-4800 interrupt controller irqchip/ts4800: Add documentation for TS-4800 interrupt controller irq/platform-MSI: Increase the maximum MSIs the MSI framework can support irqchip/gicv2m: Miscellaneous fixes for v2m resources and SPI ranges irqchip/bcm2836: Make code more readable irqchip/bcm2836: Tolerate IRQs while no flag is set in ISR irqchip/bcm2836: Add SMP support for the 2836 irqchip/bcm2836: Fix initialization of the LOCAL_IRQ_CNT timers irqchip/gic-v2m: acpi: Introducing GICv2m ACPI support irqchip/gic-v2m: Refactor to prepare for ACPI support irqdomain: Introduce is_fwnode_irqchip helper acpi: pci: Setup MSI domain for ACPI based pci devices genirq/msi: Export functions to allow MSI domains in modules irqchip/mbigen: Implement the mbigen irq chip operation functions irqchip/mbigen: Create irq domain for each mbigen device irqchip/mgigen: Add platform device driver for mbigen device dt-bindings: Documents the mbigen bindings ...
2016-01-12Merge branches 'timers-core-for-linus' and 'timers-urgent-for-linus' of ↵Linus Torvalds1-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer updates - and a leftover fix - from Thomas Gleixner: "A rather large (commit wise) update from the timer side: - A bulk update to make compile tests work in the clocksource drivers - An overhaul of the h8300 timers - Some more Y2038 work - A few overflow prevention checks in the timekeeping/ntp code - The usual pile of fixes and improvements to the various clocksource/clockevent drivers and core code" Also: "A single fix for the posix-clock poll code which did not make it into 4.4" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (84 commits) clocksource/drivers/acpi_pm: Convert to pr_* macros clocksource: Make clocksource validation work for all clocksources timekeeping: Cap adjustments so they don't exceed the maxadj value ntp: Fix second_overflow's input parameter type to be 64bits ntp: Change time_reftime to time64_t and utilize 64bit __ktime_get_real_seconds timekeeping: Provide internal function __ktime_get_real_seconds clocksource/drivers/h8300: Use ioread / iowrite clocksource/drivers/h8300: Initializer cleanup. clocksource/drivers/h8300: Simplify delta handling clocksource/drivers/h8300: Fix timer not overflow case clocksource/drivers/h8300: Change to overflow interrupt clocksource/drivers/lpc32: Correct pr_err() output format clocksource/drivers/arm_global_timer: Fix suspend resume clocksource/drivers/pistachio: Fix wrong calculated clocksource read value clockevents/drivers/arm_global_timer: Use writel_relaxed in gt_compare_set clocksource/drivers/dw_apb_timer: Inline apbt_readl and apbt_writel clocksource/drivers/dw_apb_timer: Use {readl|writel}_relaxed in critical path clocksource/drivers/dw_apb_timer: Fix apbt_readl return types clocksource/drivers/tango-xtal: Replace code by clocksource_mmio_init clocksource/drivers/h8300: Increase the compilation test coverage ... * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: posix-clock: Fix return code on the poll method's error path
2016-01-06irqchip/omap-intc: Add support for spurious irq handlingSekhar Nori1-1/+26
Under some conditions, irq sorting procedure used by INTC can go wrong resulting in a spurious irq getting reported. If this condition is not handled, it results in endless stream of: unexpected IRQ trap at vector 00 messages from ack_bad_irq() Handle the spurious interrupt condition in omap-intc driver to prevent this. Measurements using kernel function profiler on AM335x EVM running at 720MHz show that after this patch omap_intc_handle_irq() takes about 37.4us against 34us before this patch. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Cc: John Ogness <john.ogness@linutronix.de> Cc: Felipe Balbi <balbi@ti.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Link: http://lkml.kernel.org/r/9c78a6db02ac55f7af7371b417b6e414d2c3095b.1450188128.git.nsekhar@ti.com Cc: stable@vger.kernel.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-12-30irqchip/zevio: Use irq_data_get_chip_type() helperGeliang Tang1-2/+1
Use irq_data_get_chip_type() instead of container_of(). Signed-off-by: Geliang Tang <geliangtang@163.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Link: http://lkml.kernel.org/r/4cc3a3a7a74c7a1894892a85aa7eabbd1534fe96.1451484758.git.geliangtang@163.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-12-29irqchip/omap-intc: Remove duplicate setup for IRQ chip type handlerMilo Kim1-1/+0
Some OMAP interrupt controllers use generic level detection, so handle_level_irq() is used as the chip type handler. Allocated IRQ chip type handler doesn't need to set it again because irq_alloc_domain_generic_chips() has already registered it. Tested with BeagleBoneBlack Rev C. Signed-off-by: Milo Kim <milo.kim@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-omap@vger.kernel.org Cc: linux-kernel@vger.kernel.org Link: http://lkml.kernel.org/r/1450687994-12580-1-git-send-email-milo.kim@ti.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-12-29irqchip/ts4800: Add TS-4800 interrupt controllerDamien Riegel3-0/+170
This commit adds support for the TS-4800 interrupt controller. This controller is instantiated in a companion FPGA, and multiplex interrupts for other FPGA IPs. As this component is external to the SoC, the SoC might need to reserve pins, so this controller is implemented as a platform driver and doesn't use the IRQCHIP_DECLARE construct. Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Cc: kernel@savoirfairelinux.com Link: http://lkml.kernel.org/r/1450728683-31416-2-git-send-email-damien.riegel@savoirfairelinux.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-12-29irqchip/gicv2m: Miscellaneous fixes for v2m resources and SPI rangesSuravee Suthikulpanit1-4/+4
This patch contain fixes for v2m resources and SPI ranges: * Fix off-by-one error when set up v2m resource end range in gicv2m_acpi_init(). * Fix the off-by-one print error for SPI range. * Use %pR to properly print resource range information. Both ACPI and DT should now print: GICv2m: range[mem 0xe1180000-0xe1180fff], SPI[64:319] Suggested-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Catalin Marinas <Catalin.Marinas@arm.com> Cc: <hanjun.guo@linaro.org> Cc: <tomasz.nowicki@linaro.org> Cc: <graeme.gregory@linaro.org> Cc: <dhdang@apm.com> Cc: <linux-arm-kernel@lists.infradead.org> Cc: <marc.zyngier@arm.com> Cc: <jason@lakedaemon.net> Cc: <rjw@rjwysocki.net> Link: http://lkml.kernel.org/r/1450830263-28914-1-git-send-email-Suravee.Suthikulpanit@amd.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-12-29irqchip/bcm2836: Make code more readableAndrea Merello1-1/+1
Avoid using hardcoded magics. We have a #define for this number. No functional changes. Signed-off-by: Andrea Merello <andrea.merello@gmail.com> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Eric Anholt <eric@anholt.net> Cc: linux-arm-kernel@lists.infradead.org Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Lee Jones <lee@kernel.org> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-rpi-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1451166444-11044-5-git-send-email-eric@anholt.net Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-12-29irqchip/bcm2836: Tolerate IRQs while no flag is set in ISRAndrea Merello1-1/+1
On my RPi2 I got a lot of: unexpected IRQ trap at vector 00 This happens because bcm2836_arm_irqchip_handle_irq() is sometimes invoked even if the ISR is clear, and this case is not handled. This patch explicitly handle this case, fixing the kernel complaints about the bad IRQ lookup. Signed-off-by: Andrea Merello <andrea.merello@gmail.com> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Eric Anholt <eric@anholt.net> Cc: linux-arm-kernel@lists.infradead.org Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Lee Jones <lee@kernel.org> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-rpi-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1451166444-11044-4-git-send-email-eric@anholt.net Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-12-29irqchip/bcm2836: Add SMP support for the 2836Andrea Merello1-2/+23
The firmware sets the secondaries spinning waiting for a non-NULL value to show up in the last IPI mailbox. The original SMP port from the downstream tree was done by Andrea, and Eric cleaned it up/rewrote it a few times from there. Signed-off-by: Andrea Merello <andrea.merello@gmail.com> Signed-off-by: Eric Anholt <eric@anholt.net> Cc: linux-arm-kernel@lists.infradead.org Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Lee Jones <lee@kernel.org> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-rpi-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1451166444-11044-3-git-send-email-eric@anholt.net Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-12-29irqchip/bcm2836: Fix initialization of the LOCAL_IRQ_CNT timersEric Anholt1-0/+26
The irqchip's register area includes the the setup for the timer's scaling factors, and for the platform we want a fixed configuration of these registers. Signed-off-by: Eric Anholt <eric@anholt.net> Cc: linux-arm-kernel@lists.infradead.org Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Lee Jones <lee@kernel.org> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-rpi-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1451166444-11044-2-git-send-email-eric@anholt.net Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-12-29Merge tag 'irqchip-core-v4.5' of git://git.infradead.org/users/jcooper/linux ↵Thomas Gleixner2-45/+64
into irq/core Pull irqchip core changes for v4.5 from Jason Cooper: - renesas-intc-irqpin: Remove platform code, improve clock handling - sunxi-nmi: Extend NMI support to include A80
2015-12-29Merge branch 'irq/gic-v2m-acpi' of ↵Thomas Gleixner2-24/+147
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core Pull another round of GIC changes from Marc: ACPI support for GIV-v2m
2015-12-23Merge branch 'irqchip/sunxi' into irqchip/coreJason Cooper1-0/+13
2015-12-21irqchip/gic-v2m: acpi: Introducing GICv2m ACPI supportSuravee Suthikulpanit2-2/+114
This patch introduces gicv2m_acpi_init(), which uses information in MADT GIC MSI frames structure to initialize GICv2m driver. It also exposes gicv2m_init() function, which simplifies callers to a single GICv2m init function. Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Tested-by: Duc Dang <dhdang@apm.com> Acked-by: Rafael J. Wysocki <rjw@rjwysocki.net> Signed-off-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com> Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-12-21irqchip/gic-v2m: Refactor to prepare for ACPI supportSuravee Suthikulpanit1-21/+32
This patch replaces the struct device_node with struct fwnode_handle since this structure is common between DT and ACPI. It also refactors gicv2m_init_one() to prepare for ACPI support. The only functional change is removing the node name from pr_info. Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-12-21irqdomain: Introduce is_fwnode_irqchip helperSuravee Suthikulpanit1-1/+1
Since there will be several places checking if fwnode.type is equal FWNODE_IRQCHIP, this patch adds a convenient function for this purpose. Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-12-19Merge branch 'irq/gic-4.5' of ↵Thomas Gleixner5-32/+75
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core Pull the GIC related updates from Marc Zyngier: "Not a lot this time (what a relief!), but an interesting series from Linus Walleij coming out of his work converting the ARM RealView platforms to DT, and a couple of mundane fixes."
2015-12-18irqchip/mbigen: Implement the mbigen irq chip operation functionsMa Jun1-0/+81
Add the interrupt controller chip operation functions of mbigen chip. Signed-off-by: Ma Jun <majun258@huawei.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-12-18irqchip/mbigen: Create irq domain for each mbigen deviceMa Jun1-0/+138
For peripheral devices which connect to mbigen,mbigen is a interrupt controller. So, we create irq domain for each mbigen device and add mbigen irq domain into irq hierarchy structure. Signed-off-by: Ma Jun <majun258@huawei.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-12-18irqchip/mgigen: Add platform device driver for mbigen deviceMa Jun3-0/+87
Mbigen means Message Based Interrupt Generator(MBIGEN). Its a kind of interrupt controller that collects the interrupts from external devices and generate msi interrupt. Mbigen is applied to reduce the number of wire connected interrupts. As the peripherals increasing, the interrupts lines needed is increasing much, especially on the Arm64 server SOC. Therefore, the interrupt pin in GIC is not enough to cover so many peripherals. Mbigen is designed to fix this problem. Mbigen chip locates in ITS or outside of ITS. Mbigen chip hardware structure shows as below: mbigen chip |---------------------|-------------------| mgn_node0 mgn_node1 mgn_node2 | |-------| |-------|------| dev1 dev1 dev2 dev1 dev3 dev4 Each mbigen chip contains several mbigen nodes. External devices can connect to mbigen node through wire connecting way. Because a mbigen node only can support 128 interrupt maximum, depends on the interrupt lines number of devices, a device can connects to one more mbigen nodes. Also, several different devices can connect to a same mbigen node. When devices triggered interrupt,mbigen chip detects and collects the interrupts and generates the MBI interrupts by writing the ITS Translator register. To simplify mbigen driver,I used a new conception--mbigen device. Each mbigen device is initialized as a platform device. Mbigen device presents the parts(register, pin definition etc.) in mbigen chip corresponding to a peripheral device. So from software view, the structure likes below mbigen chip |---------------------|-----------------| mbigen device1 mbigen device2 mbigen device3 | | | dev1 dev2 dev3 Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Ma Jun <majun258@huawei.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-12-18irqchip/gic: Kconfig the number of instancesLinus Walleij2-20/+15
There is currently a hack in the GIC driver making it possible to pass the number of GIC instances from the platform-specific include files and thus override the variable MAX_GIC_NR. With multiplatform deployments, this will not work as we need to get rid of the platform-specific include files. It turns out that this feature is only used by the RealView platform which has a cascaded GIC. So move the configuration to Kconfig and bump to 2 instances if we're building for the RealView. The include file hacks can then be removed. Tested on the ARM PB11MPCore with its cascaded GIC. Suggested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-12-16irqchip/gic: Make interrupt ID 1020 invalidMarc Zyngier1-1/+1
The GIC has no such thing as interrupt 1020: the last valid ID is 1019, and the range 1020-1023 is reserved - 1023 indicating that no interrupt is pending. So let's make sure we don't try to handle this ID. This bug has been in since the initial GIC code was introduced in 8ad68bbf7a06 ("[ARM] Add support for ARM RealView board"). Reported-by: Eric Auger <eric.auger@linaro.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-12-16irqchip/gic-v2m: Fix of_node refcount on errorMarc Zyngier1-1/+1
On the error path, the v2m drivers drops the refcount on the parent node instead of doing it on the node that generated the error. Humph... Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-12-16irqchip/gic: Assign irqchip dynamicallyLinus Walleij1-9/+13
Instead of having the irqchip being a static struct, make it part of the per-instance data so we can assign it a dynamic name. This has the usable side effect of displaying the GIC with an instance number as GIC0, GIC1 ... GICn in /proc/interrupts, which is helpful when debugging cascaded GICs, such as on the ARM PB11MPCore. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-12-16irqchip/gic: Support RealView variant setupLinus Walleij3-1/+45
The ARM RealView PB11MPCore reference design has some special bits in a system controller register to set up the GIC in one of three modes: legacy, new with DCC, new without DCC. The register is also used to enable FIQ. Since the platform will not boot unless this register is set up to "new with DCC" mode, we need a special quirk to be compiled-in for the RealView platforms. If we find the right compatible string on the GIC TestChip, we enable this quirk by looking up the system controller and enabling the special bits. We depend on the CONFIG_REALVIEW_DT Kconfig symbol as the old boardfile code has the same fix hardcoded, and this is only needed for the attempts to modernize the RealView code using device tree. After fixing this, the PB11MPCore boots with device tree only. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-12-15h8300: Rename ctlr_out/in[bwl] to raw_read/write[bwl]Daniel Lezcano1-4/+4
For the sake of consistency, let rename all ctrl_out/in calls to the write/read calls so we have the same API consistent with the other architectures hence open the door for the increasing of the test compilation coverage. The unsigned long coercive cast is removed because all variables are set to the right type "void __iomem *". Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2015-12-03irqchip/sunxi-nmi: Support sun9i A80 NMI controllerChen-Yu Tsai1-0/+13
The A80 moves the NMI controller into the PRCM address space, and also rearranges the registers. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://lkml.kernel.org/r/1449130813-22400-4-git-send-email-wens@csie.org Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2015-12-02irqchip/versatile-fpga: Fix PCI IRQ mapping on Versatile PBGuillaume Delbergue1-0/+5
This patch is specifically for PCI support on the Versatile PB board using a DT. Currently, the dynamic IRQ mapping is broken when using DTs. For example, on QEMU, the SCSI driver is unable to request the IRQ. To fix this issue, this patch replaces the current dynamic mechanism with a static value as is done in the non-DT case. Signed-off-by: Guillaume Delbergue <guillaume.delbergue@greensocs.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: stable@vger.kernel.org
2015-11-24irqchip/renesas-intc-irqpin: Improve clock error handling and reportingGeert Uytterhoeven1-12/+33
If the Renesas External IRQ Pin driver cannot find a functional clock, it prints a warning, .e.g. renesas_intc_irqpin fe78001c.interrupt-controller: unable to get clock and continues, as the clock is optional, depending on the SoC type. This warning may confuse users. To fix this, add a flag to indicate that the clock is mandatory or optional, and add a few more compatible entries: - If the clock is mandatory (on R-Mobile A1 or SH-Mobile AG5), a missing clock is now treated as a fatal error, - If the clock is optional (on R-Car Gen1, or using the generic "renesas,intc-irqpin" compatible value), the warning is no longer printed. This requires making struct intc_irqpin_irlm_config more generic by renaming it to intc_irqpin_config, and adding a flag to indicate if IRLM is needed. The new clock flag is merged with the existing shared_irqs boolean into a bitfield to save space. Suggested-by: Magnus Damm <magnus.damm@gmail.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lkml.kernel.org/r/1448377693-19597-1-git-send-email-geert+renesas@glider.be Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2015-11-24irqchip/renesas-intc-irqpin: Remove intc_irqpin_priv.number_of_irqsGeert Uytterhoeven1-11/+10
intc_irqpin_priv.number_of_irqs is used inside intc_irqpin_probe() only, so it can just become a local variable. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/1448376581-9202-3-git-send-email-geert+renesas@glider.be Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2015-11-24irqchip/renesas-intc-irqpin: Remove obsolete platform data supportGeert Uytterhoeven1-26/+12
Since commit 4baadb9e05c68962 ("ARM: shmobile: r8a7778: remove obsolete setup code"), all Renesas SoCs with a renesas-intc-irqpin module are only supported in generic DT-only ARM multi-platform builds. The driver doesn't need to use platform data anymore, hence remove platform data configuration. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/1448376581-9202-2-git-send-email-geert+renesas@glider.be Signed-off-by: Jason Cooper <jason@lakedaemon.net>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-18 22:31:28 +0300