| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
commit 9f7488f24c7571d349d938061e0ede7a39b65d6b upstream.
0-day reported an off by one in the ioremap() sizing:
drivers/irqchip/irq-mvebu-gicp.c:240:45-48: WARNING:
Suspicious code. resource_size is maybe missing with gicp -> res
Convert it to resource_size(), which does the right thing.
Fixes: 3c3d7dbab2c7 ("irqchip/mvebu-gicp: Clear pending interrupts on init")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Closes: https://lore.kernel.org/oe-kbuild-all/202508062150.mtFQMTXc-lkp@intel.com/
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 3c3d7dbab2c70a4bca47634d564bf659351c05ca ]
When a kexec'ed kernel boots up, there might be stale unhandled interrupts
pending in the interrupt controller. These are delivered as spurious
interrupts once the boot CPU enables interrupts.
Clear all pending interrupts when the driver is initialized to prevent
these spurious interrupts from locking the CPU in an endless loop.
Signed-off-by: Elad Nachman <enachman@marvell.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250803102548.669682-2-enachman@marvell.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2250db8628a0d8293ad2e0671138b848a185fba1 ]
Devices of the Realtek MIPS Otto platform use the official rtl-otto-timer
as clock event generator and CPU clocksource. It is registered for each CPU
startup via cpuhp_setup_state() and forces the affinity of the clockevent
interrupts to the appropriate CPU via irq_force_affinity().
On the "smaller" devices with a vendor specific interrupt controller
(supported by irq-realtek-rtl) the registration works fine. The "larger"
RTL931x series is based on a MIPS interAptiv dual core with a MIPS GIC
controller. Interrupt routing setup is cancelled because gic_set_affinity()
does not accept the current (not yet online) CPU as a target.
Relax the checks by evaluating the force parameter that is provided for
exactly this purpose like in other drivers. With this the affinity can be
set as follows:
- force = false: allow to set affinity to any online cpu
- force = true: allow to set affinity to any cpu
Co-developed-by: Sebastian Gottschall <s.gottschall@dd-wrt.com>
Signed-off-by: Sebastian Gottschall <s.gottschall@dd-wrt.com>
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250621054952.380374-1-markus.stockhausen@gmx.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit de2942828e7670526289f098df7e50b112e8ff1e ]
The interrupt controller found on RZ/G3E doesn't provide any facility to
configure the wakeup sources. That's the reason why the driver lacks the
irq_set_wake() callback for the interrupt chip.
But this prevent to properly enter power management states like "suspend to
idle".
Enable the flags IRQCHIP_SKIP_SET_WAKE and IRQCHIP_MASK_ON_SUSPEND so the
interrupt suspend logic can handle the chip correctly.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/all/20250701105923.52151-1-biju.das.jz@bp.renesas.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3b6a18f0da8720d612d8a682ea5c55870da068e0 ]
Compile-testing IMX_MU_MSI on x86 without PCI_MSI support results in a
build failure:
drivers/gpio/gpio-sprd.c:8:
include/linux/gpio/driver.h:41:33: error: field 'msiinfo' has incomplete type
drivers/iommu/iommufd/viommu.c:4:
include/linux/msi.h:528:33: error: field 'alloc_info' has incomplete type
Tighten the dependency further to only allow compile testing on Arm.
This could be refined further to allow certain x86 configs.
This was submitted before to address a different build failure, which was
fixed differently, but the problem has now returned in a different form.
Fixes: 70afdab904d2d1e6 ("irqchip: Add IMX MU MSI controller driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250805160952.4006075-1-arnd@kernel.org
Link: https://lore.kernel.org/all/20221215164109.761427-1-arnd@kernel.org/
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
irq-msi-lib directly uses struct msi_domain_info and more things which are
only available when CONFIG_GENERIC_MSI_IRQ=y.
However, there is no dependency specified and CONFIG_IRQ_MSI_LIB can be
enabled without CONFIG_GENERIC_MSI_IRQ, which causes the kernel build fail.
Make IRQ_MSI_LIB select GENEREIC_MSI_IRQ to prevent that.
Fixes: 72e257c6f058 ("irqchip: Provide irq-msi-lib")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/b0c44007f3b7e062228349a2395f8d850050db33.1751277765.git.namcao@linutronix.de
Closes: https://lore.kernel.org/oe-kbuild-all/202506282256.cHlEHrdc-lkp@intel.com/
|
|
ath79_misc_irq_init() was defined but unused since commit 51fa4f8912c0
("MIPS: ath79: drop legacy IRQ code"), so it's time to drop it.
The build also warns about a missing prototype of get_c0_perfcount_int().
Remove the stale leftover function and add the missing include.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/OSBPR01MB167032D2017645200787AAEBBC72A@OSBPR01MB1670.jpnprd01.prod.outlook.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"A fairly small update for the dmaengine subsystem. This has a new ARM
dmaengine driver and couple of new device support and few driver
changes:
New support:
- Renesas RZ/V2H(P) dma support for r9a09g057
- Arm DMA-350 driver
- Tegra Tegra264 ADMA support
Updates:
- AMD ptdma driver code removal and optimizations
- Freescale edma error interrupt handler support"
* tag 'dmaengine-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (27 commits)
dmaengine: idxd: Remove unused pointer and macro
arm64: dts: renesas: r9a09g057: Add DMAC nodes
dmaengine: sh: rz-dmac: Add RZ/V2H(P) support
dmaengine: sh: rz-dmac: Allow for multiple DMACs
irqchip/renesas-rzv2h: Add rzv2h_icu_register_dma_req()
dt-bindings: dma: rz-dmac: Document RZ/V2H(P) family of SoCs
dt-bindings: dma: rz-dmac: Restrict properties for RZ/A1H
dmaengine: idxd: Narrow the restriction on BATCH to ver. 1 only
dmaengine: ti: Add NULL check in udma_probe()
fsldma: Set correct dma_mask based on hw capability
dmaengine: idxd: Check availability of workqueue allocated by idxd wq driver before using
dmaengine: xilinx_dma: Set dma_device directions
dmaengine: tegra210-adma: Add Tegra264 support
dt-bindings: Document Tegra264 ADMA support
dmaengine: dw-edma: Add HDMA NATIVE map check
dmaegnine: fsl-edma: add edma error interrupt handler
dt-bindings: dma: fsl-edma: increase maxItems of interrupts and interrupt-names
dmaengine: ARM_DMA350 should depend on ARM/ARM64
dt-bindings: dma: qcom,bam: Document dma-coherent property
dmaengine: Add Arm DMA-350 driver
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer cleanups from Thomas Gleixner:
"Another set of timer API cleanups:
- Convert init_timer*(), try_to_del_timer_sync() and
destroy_timer_on_stack() over to the canonical timer_*()
namespace convention.
There is another large conversion pending, which has not been included
because it would have caused a gazillion of merge conflicts in next.
The conversion scripts will be run towards the end of the merge window
and a pull request sent once all conflict dependencies have been
merged"
* tag 'timers-cleanups-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
treewide, timers: Rename destroy_timer_on_stack() as timer_destroy_on_stack()
treewide, timers: Rename try_to_del_timer_sync() as timer_delete_sync_try()
timers: Rename init_timers() as timers_init()
timers: Rename NEXT_TIMER_MAX_DELTA as TIMER_NEXT_MAX_DELTA
timers: Rename __init_timer_on_stack() as __timer_init_on_stack()
timers: Rename __init_timer() as __timer_init()
timers: Rename init_timer_on_stack_key() as timer_init_key_on_stack()
timers: Rename init_timer_key() as timer_init_key()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull MSI updates from Thomas Gleixner:
"Updates for the MSI subsystem (core code and PCI):
- Switch the MSI descriptor locking to lock guards
- Replace a broken and naive implementation of PCI/MSI-X control word
updates in the PCI/TPH driver with a properly serialized variant in
the PCI/MSI core code.
- Remove the MSI descriptor abuse in the SCCI/UFS/QCOM driver by
replacing the direct access to the MSI descriptors with the proper
API function calls. People will never understand that APIs exist
for a reason...
- Provide core infrastructre for the upcoming PCI endpoint library
extensions. Currently limited to ARM GICv3+, but in theory
extensible to other architectures.
- Provide a MSI domain::teardown() callback, which allows drivers to
undo the effects of the prepare() callback.
- Move the MSI domain::prepare() callback invocation to domain
creation time to avoid redundant (and in case of ARM/GIC-V3-ITS
confusing) invocations on every allocation.
In combination with the new teardown callback this removes some
ugly hacks in the GIC-V3-ITS driver, which pretended to work around
the short comings of the core code so far. With this update the
code is correct by design and implementation.
- Make the irqchip MSI library globally available, provide a MSI
parent domain creation helper and convert a bunch of (PCI/)MSI
drivers over to the modern MSI parent mechanism. This is the first
step to get rid of at least one incarnation of the three PCI/MSI
management schemes.
- The usual small cleanups and improvements"
* tag 'irq-msi-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits)
PCI/MSI: Use bool for MSI enable state tracking
PCI: tegra: Convert to MSI parent infrastructure
PCI: xgene: Convert to MSI parent infrastructure
PCI: apple: Convert to MSI parent infrastructure
irqchip/msi-lib: Honour the MSI_FLAG_NO_AFFINITY flag
irqchip/mvebu: Convert to msi_create_parent_irq_domain() helper
irqchip/gic: Convert to msi_create_parent_irq_domain() helper
genirq/msi: Add helper for creating MSI-parent irq domains
irqchip: Make irq-msi-lib.h globally available
irqchip/gic-v3-its: Use allocation size from the prepare call
genirq/msi: Engage the .msi_teardown() callback on domain removal
genirq/msi: Move prepare() call to per-device allocation
irqchip/gic-v3-its: Implement .msi_teardown() callback
genirq/msi: Add .msi_teardown() callback as the reverse of .msi_prepare()
irqchip/gic-v3-its: Add support for device tree msi-map and msi-mask
dt-bindings: PCI: pci-ep: Add support for iommu-map and msi-map
irqchip/gic-v3-its: Set IRQ_DOMAIN_FLAG_MSI_IMMUTABLE for ITS
irqdomain: Add IRQ_DOMAIN_FLAG_MSI_IMMUTABLE and irq_domain_is_msi_immutable()
platform-msi: Add msi_remove_device_irq_domain() in platform_device_msi_free_irqs_all()
genirq/msi: Rename msi_[un]lock_descs()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq cleanups from Thomas Gleixner:
"A set of cleanups for the generic interrupt subsystem:
- Consolidate on one set of functions for the interrupt domain code
to get rid of pointlessly duplicated code with only marginal
different semantics.
- Update the documentation accordingly and consolidate the coding
style of the irqdomain header"
* tag 'irq-cleanups-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (46 commits)
irqdomain: Consolidate coding style
irqdomain: Fix kernel-doc and add it to Documentation
Documentation: irqdomain: Update it
Documentation: irq-domain.rst: Simple improvements
Documentation: irq/concepts: Minor improvements
Documentation: irq/concepts: Add commas and reflow
irqdomain: Improve kernel-docs of functions
irqdomain: Make struct irq_domain_info variables const
irqdomain: Use irq_domain_instantiate()'s return value as initializers
irqdomain: Drop irq_linear_revmap()
pinctrl: keembay: Switch to irq_find_mapping()
irqchip/armada-370-xp: Switch to irq_find_mapping()
gpu: ipu-v3: Switch to irq_find_mapping()
gpio: idt3243x: Switch to irq_find_mapping()
sh: Switch to irq_find_mapping()
powerpc: Switch to irq_find_mapping()
irqdomain: Drop irq_domain_add_*() functions
powerpc: Switch irq_domain_add_nomap() to use fwnode
thermal: Switch to irq_domain_create_linear()
soc: Switch to irq_domain_create_*()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq controller updates from Thomas Gleixner:
"Update for interrupt chip drivers:
- Convert the generic interrupt chip to lock guards to remove copy &
pasta boilerplate code and gotos.
- A new driver fot the interrupt controller in the EcoNet EN751221
MIPS SoC.
- Extend the SG2042-MSI driver to support the new SG2044 SoC
- Updates and cleanups for the (ancient) VT8500 driver
- Improve the scalability of the ARM GICV4.1 ITS driver by utilizing
node local copies a VM's interrupt translation table when possible.
This results in a 12% reduction of VM IPI latency in certain
workloads.
- The usual cleanups and improvements all over the place"
* tag 'irq-drivers-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits)
irqchip/irq-pruss-intc: Simplify chained interrupt handler setup
irqchip/gic-v4.1: Use local 4_1 ITS to generate VSGI
irqchip/econet-en751221: Switch to of_fwnode_handle()
irqchip/irq-vt8500: Switch to irq_domain_create_*()
irqchip/econet-en751221: Switch to irq_domain_create_linear()
irqchip/irq-vt8500: Use fewer global variables and add error handling
irqchip/irq-vt8500: Use a dedicated chained handler function
irqchip/irq-vt8500: Don't require 8 interrupts from a chained controller
irqchip/irq-vt8500: Drop redundant copy of the device node pointer
irqchip/irq-vt8500: Split up ack/mask functions
irqchip/sg2042-msi: Fix wrong type cast in sg2044_msi_irq_ack()
irqchip/sg2042-msi: Add the Sophgo SG2044 MSI interrupt controller
irqchip/sg2042-msi: Introduce configurable chipinfo for SG2042
irqchip/sg2042-msi: Rename functions and data structures to be SG2042 agnostic
dt-bindings: interrupt-controller: Add Sophgo SG2044 MSI controller
genirq/generic-chip: Fix incorrect lock guard conversions
genirq/generic-chip: Remove unused lock wrappers
irqchip: Convert generic irqchip locking to guards
gpio: mvebu: Convert generic irqchip locking to guard()
ARM: orion/gpio:: Convert generic irqchip locking to guard()
...
|
|
Bad MSI implementations multiplex MSIs onto a single downstream interrupt,
meaning they have no concept of individual affinity.
The old MSI code did a reasonable job at this by honouring the
MSI_FLAG_NO_AFFINITY, but the new shiny device MSI code doesn't.
Teach it about the sad reality of existing hardware.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250513172819.2216709-7-maz@kernel.org
|
|
Switch the MVEBU family of interrupt chip drivers over to the common helper
function to create the interrupt domains.
[ tglx: Moved the struct out of the function call argument and fix up
the of_node_to_fwnode() instances ]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250513172819.2216709-5-maz@kernel.org
|
|
Switch the GIC family of interrupt chip drivers over to the common helper
function to create the interrupt domains.
[ tglx: Moved the struct out of the function call argument ]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250513172819.2216709-4-maz@kernel.org
|
|
Move irq-msi-lib.h into include/linux/irqchip, making it available
to compilation units outside of drivers/irqchip.
This requires some churn in drivers to fetch it from the new location,
generated using this script:
git grep -l -w \"irq-msi-lib.h\" | \
xargs sed -i -e 's:"irq-msi-lib.h":\<linux/irqchip/irq-msi-lib.h\>:'
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250513172819.2216709-2-maz@kernel.org
|
|
irq_linear_revmap() is deprecated, so remove all its uses and supersede
them by an identical call to irq_find_mapping().
[ tglx: Fix up subject prefix ]
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250319092951.37667-47-jirislaby@kernel.org
|
|
irq_domain_add_*() interfaces are going away as being obsolete now.
Switch to the preferred irq_domain_create_*() ones. Those differ in the
node parameter: They take more generic struct fwnode_handle instead of
struct device_node. Therefore, of_fwnode_handle() is added around the
original parameter.
Note some of the users can likely use dev->fwnode directly instead of
indirect of_fwnode_handle(dev->of_node). But dev->fwnode is not
guaranteed to be set for all, so this has to be investigated on case to
case basis (by people who can actually test with the HW).
[ tglx: Fix up subject prefix ]
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Changhuang Liang <changhuang.liang@starfivetech.com>
Link: https://lore.kernel.org/all/20250319092951.37667-22-jirislaby@kernel.org
|
|
of_node_to_fwnode() is irqdomain's reimplementation of the "officially"
defined of_fwnode_handle(). The former is in the process of being
removed, so use the latter instead.
[ tglx: Fix up subject prefix ]
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Antonio Borneo <antonio.borneo@foss.st.com>
Reviewed-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Acked-by: Herve Codina <herve.codina@bootlin.com> # irq-lan966x-oic
Link: https://lore.kernel.org/all/20250319092951.37667-7-jirislaby@kernel.org
|
|
The chained interrupt handler setup installs the handler and handler data
with two function call.s
irq_set_chained_handler_and_data() can set both in one operation. Replace
the two calls with one.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250515083450.3811411-1-nichen@iscas.ac.cn
|
|
On multi-node GICv4.1 system, VSGI senders always use one certain 4_1 ITS,
because find_4_1_its() returns the first its_node in the list, regardless of
which node the VSGI sender is on. This brings guest VSGI performance drop
when VM is not running on the same node as this returned ITS.
On a 2-socket environment, each with one ITS and 32 cpu, GICv4.1 enabled,
4U8G guest, 4 vcpu is running on same socket.
When the VM is on socket0, kvm-unit-tests ipi_hw result is 850ns.
When the VM is on socket1, it is 750ns.
The reason is that the VSGI sender always uses the last reported ITS (that
on socket1) to inject VSGI. The access from a CPU to a other-socket ITS
will cost 100ns more compared to an access to the local ITS.
Using the local ITS results in a 12% reduction in IPI latency.
Modify find_4_1_its() to return the first per-CPU local_4_1_its, which is
initialized when the VPE table is inherited from the ITS or from another
CPU. If it fails to find a local 4_1 ITS, it returns any 4_1 ITS like
before.
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Nianyao Tang <tangnianyao@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/all/20250515145359.2795959-1-tangnianyao@huawei.com
|
|
When starting the local sync timer to synchronize the state of a remote
CPU it should be added on the CPU to be synchronized, not the initiating
CPU. This results in interrupt delivery being delayed until the timer
eventually runs (due to another mask/unmask/migrate operation) on the
target CPU.
Fixes: 0f67911e821c ("irqchip/riscv-imsic: Separate next and previous pointers in IMSIC vector")
Signed-off-by: Andrew Bresticker <abrestic@rivosinc.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/all/20250514171320.3494917-1-abrestic@rivosinc.com
|
|
On the Renesas RZ/V2H(P) family of SoCs, DMAC IPs are connected
to the Interrupt Control Unit (ICU).
For DMA transfers, a request number must be registered with the
ICU, which means that the DMAC driver has to be able to instruct
the ICU driver with the registration of such id.
Export rzv2h_icu_register_dma_req() so that the DMAC driver can
register the DMAC request number.
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20250423143422.3747702-4-fabrizio.castro.jz@renesas.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Commit 1c000dcaad2be ("irqchip/irq-msi-lib: Optionally set default
irq_eoi()/irq_ack()") added blanket MSI_CHIP_FLAG_SET_ACK flags,
irrespective of whether the underlying irqchip required it or not.
Drop it from a number of drivers that do not require it.
Fixes: 1c000dcaad2be ("irqchip/irq-msi-lib: Optionally set default irq_eoi()/irq_ack()")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250513172819.2216709-6-maz@kernel.org
|
|
Now that .msi_prepare() gets called at the right time and not
with semi-random parameters, remove the ugly hack that tried
to fix up the number of allocated vectors.
It is now correct by construction.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250513163144.2215824-6-maz@kernel.org
|
|
The ITS driver currently nukes the structure representing an endpoint
device translating via an ITS on freeing the last LPI allocated for it.
That's an unfortunate state of affair, as it is pretty common for a driver
to allocate a single MSI, do something clever, teardown this MSI, and
reallocate a whole bunch of them. The NVME driver does exactly that,
amongst others.
What happens in that case is that the core code is accidentaly issuing
another .msi_prepare() call, even if it shouldn't. This luckily cancels
the above behaviour and hides the problem.
In order to fix the core code, start by implementing the new
.msi_teardown() callback. Nothing calls it yet, so a side effect is that
the its_dev structure will not be freed and that the DID will stay
mapped. Not a big deal, and this will be solved in following patches.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250513163144.2215824-3-maz@kernel.org
|
|
of_node_to_fwnode() is an irqdomain's reimplementation of the
"officially" defined of_fwnode_handle(). The former is in the process of
being removed, so use the latter instead.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250513084739.2611747-1-jirislaby@kernel.org
|
|
Move this API to the canonical timer_*() namespace.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250507175338.672442-9-mingo@kernel.org
|
|
Some platform devices create child devices dynamically and require the
parent device's msi-map to map device IDs to actual sideband information.
A typical use case is using ITS as a PCIe Endpoint Controller(EPC)'s
doorbell function, where PCI hosts send TLP memory writes to the EP
controller. The EP controller converts these writes to AXI transactions
and appends platform-specific sideband information.
EPC's DTS will provide such information by msi-map and msi-mask. A
simplified dts as
pcie-ep@10000000 {
...
msi-map = <0 &its 0xc 8>;
^^^ 0xc is implement defined sideband information,
which append to AXI write transaction.
^ 0 is function index.
msi-mask = <0x7>
}
Check msi-map if msi-parent missed to keep compatility with existing systems.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250414-ep-msi-v18-5-f69b49917464@nxp.com
|
|
Set the IRQ_DOMAIN_FLAG_MSI_IMMUTABLE flag for ITS, as it does not change
the address/data pair after setup.
Ensure compatibility with MSI users, such as PCIe Endpoint Doorbell, which
require the address/data pair to remain unchanged. Enable PCIe endpoints to
use ITS for triggering doorbells from the PCIe Root Complex (RC) side.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250414-ep-msi-v18-3-f69b49917464@nxp.com
|
|
irq_domain_add_*() interfaces are going away as being obsolete now.
Switch to the preferred irq_domain_create_*() ones. Those differ in the
node parameter: They take more generic struct fwnode_handle instead of
struct device_node. Therefore, of_fwnode_handle() is added around the
original parameter.
Note some of the users can likely use dev->fwnode directly instead of
indirect of_fwnode_handle(dev->of_node). But dev->fwnode is not
guaranteed to be set for all, so this has to be investigated on case to
case basis (by people who can actually test with the HW).
[ tglx: Split out from combo patch to avoid merge conflicts ]
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250319092951.37667-22-jirislaby@kernel.org
|
|
irq_domain_add_linear() is about to be removed. Switch to
irq_domain_create_linear().
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Caleb James DeLisle <cjd@cjdns.fr>
Link: https://lore.kernel.org/all/877c2top39.ffs@tglx
|
|
Controller private data doesn't really need to be in a global
statically allocated array - kzalloc it per controller instead,
keeping only one pointer to the primary controller global.
While at that, also add proper error return statuses in the init
path and respective cleanup of resources on errors.
Signed-off-by: Alexey Charkov <alchark@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250506-vt8500-intc-updates-v2-5-a3a0606cf92d@gmail.com
|
|
Current code for the chained interrupt controller maps its interrupts on
the parent but doesn't register a separate chained handler, instead
needlessly calling enable_irq() on an unactivated parent interrupt, causing
a boot time WARN_ON from the common code.
The common handler meanwhile loops through all registered interrupt
controllers in an arbitrary order and tries to handle active interrupts
in each of them, which is fragile.
Use common infrastructure for handling chained interrupts instead.
Signed-off-by: Alexey Charkov <alchark@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250506-vt8500-intc-updates-v2-4-a3a0606cf92d@gmail.com
|
|
VT8500 chained controller can route its interrupts to either or all
of its 8 interrupt outputs. Current code actually routes all of them
to the first output, so there is no need to create mappings for all
eight.
Drop redundant checks, and only map as many chained controller
interrupts as are defined in the device tree.
Signed-off-by: Alexey Charkov <alchark@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250506-vt8500-intc-updates-v2-3-a3a0606cf92d@gmail.com
|
|
Inside vt8500_irq_init(), np is the same as node. Drop it.
Signed-off-by: Alexey Charkov <alchark@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250506-vt8500-intc-updates-v2-2-a3a0606cf92d@gmail.com
|
|
vt8500_irq_mask() really does the ACK for edge triggered interrupts and the
MASK for level triggered interrupts. Edge triggered interrupts never
really are masked as a result, and there is unnecessary reading of the
status register before the ACK even though it's write-one-to-clear.
Split it up into a proper standalone vt8500_irq_ack() and an unconditional
vt8500_irq_mask().
No Fixes tag added, as it has survived this way for 15 years and nobody
complained, so apparently nothing really used edge triggered interrupts
anyway.
[ tglx: Tabularize the irqchip struct initializer ]
Signed-off-by: Alexey Charkov <alchark@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250506-vt8500-intc-updates-v2-1-a3a0606cf92d@gmail.com
|
|
On Qualcomm chipsets not all GPIOs are wakeup capable. Those GPIOs do not
have a corresponding MPM pin and should not be handled inside the MPM
driver. The IRQ domain hierarchy is always applied, so it's required to
explicitly disconnect the hierarchy for those. The pinctrl-msm driver marks
these with GPIO_NO_WAKE_IRQ. qcom-pdc has a check for this, but
irq-qcom-mpm is currently missing the check. This is causing crashes when
setting up interrupts for non-wake GPIOs:
root@rb1:~# gpiomon -c gpiochip1 10
irq: IRQ159: trimming hierarchy from :soc@0:interrupt-controller@f200000-1
Unable to handle kernel paging request at virtual address ffff8000a1dc3820
Hardware name: Qualcomm Technologies, Inc. Robotics RB1 (DT)
pc : mpm_set_type+0x80/0xcc
lr : mpm_set_type+0x5c/0xcc
Call trace:
mpm_set_type+0x80/0xcc (P)
qcom_mpm_set_type+0x64/0x158
irq_chip_set_type_parent+0x20/0x38
msm_gpio_irq_set_type+0x50/0x530
__irq_set_trigger+0x60/0x184
__setup_irq+0x304/0x6bc
request_threaded_irq+0xc8/0x19c
edge_detector_setup+0x260/0x364
linereq_create+0x420/0x5a8
gpio_ioctl+0x2d4/0x6c0
Fix this by copying the check for GPIO_NO_WAKE_IRQ from qcom-pdc.c, so that
MPM is removed entirely from the hierarchy for non-wake GPIOs.
Fixes: a6199bb514d8 ("irqchip: Add Qualcomm MPM controller driver")
Reported-by: Alexey Klimov <alexey.klimov@linaro.org>
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Alexey Klimov <alexey.klimov@linaro.org>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20250502-irq-qcom-mpm-fix-no-wake-v1-1-8a1eafcd28d4@linaro.org
|
|
With ACPI in place, gicv2m_get_fwnode() is registered with the pci
subsystem as pci_msi_get_fwnode_cb(), which may get invoked at runtime
during a PCI host bridge probe. But, the call back is wrongly marked as
__init, causing it to be freed, while being registered with the PCI
subsystem and could trigger:
Unable to handle kernel paging request at virtual address ffff8000816c0400
gicv2m_get_fwnode+0x0/0x58 (P)
pci_set_bus_msi_domain+0x74/0x88
pci_register_host_bridge+0x194/0x548
This is easily reproducible on a Juno board with ACPI boot.
Retain the function for later use.
Fixes: 0644b3daca28 ("irqchip/gic-v2m: acpi: Introducing GICv2m ACPI support")
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
|
|
The type cast in sg2044_msi_irq_ack() lost the __iomem attribute, which
makes the pointer type incorrect.
Add it back.
Fixes: e96b93a97c90 ("irqchip/sg2042-msi: Add the Sophgo SG2044 MSI interrupt controller")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Chen Wang <unicorn_wang@outlook.com>
Link: https://lore.kernel.org/all/20250422003804.214264-1-inochiama@gmail.com
Closes: https://lore.kernel.org/oe-kbuild-all/202504211251.B3aesulq-lkp@intel.com/
|
|
The BCM2712 MIP driver is required for Raspberry PI5, but it's not
automatically enabled when ARCH_BCM2835 is enabled and depends on
ARCH_BRCMSTB.
ARCH_BCM2835 shares drivers with ARCH_BRCMSTB platforms, but Raspberry PI5
does not require the BRCMSTB specific drivers, which are selected via
ARCH_BRCMSTB.
Enable the interrupt controller for both ARCH_BRCMSTB and ARCH_BCM2835.
[ tglx: Massage changelog ]
Fixes: 32c6c054661a ("irqchip: Add Broadcom BCM2712 MSI-X interrupt controller")
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250416082523.179507-1-pbrobinson@gmail.com
|
|
A spurious TINT interrupt is seen during boot on RZ/G3E SMARC EVK.
A glitch in the edge detection circuit can cause a spurious interrupt.
Clear the status flag after setting the ICU_TSSRk registers, which is
recommended in the hardware manual as a countermeasure.
Fixes: 0d7605e75ac2 ("irqchip: Add RZ/V2H(P) Interrupt Control Unit (ICU) driver")
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
|
|
Add support for Sophgo SG2044 MSI interrupt controller.
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Chen Wang <wangchen20@iscas.ac.cn> # SG2042
Reviewed-by: Chen Wang <unicorn_wang@outlook.com>
Link: https://lore.kernel.org/all/20250413224922.69719-5-inochiama@gmail.com
|
|
As the controller on SG2044 uses different msi_parent_ops and a difffernt
irq_chip, it is necessary to provide that information to the probe function.
Add a new chipinfo structure to hold that information, implement the
necessary logic and make SG2042 use it.
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Chen Wang <wangchen20@iscas.ac.cn> # SG2042
Reviewed-by: Chen Wang <unicorn_wang@outlook.com>
Link: https://lore.kernel.org/all/20250413224922.69719-4-inochiama@gmail.com
|
|
As the driver logic can be used in both SG2042 and SG2044 SoCs, rename
functions and data structures, which are not SG2042 specific, to SG204x*.
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Chen Wang <wangchen20@iscas.ac.cn> # SG2042
Reviewed-by: Chen Wang <unicorn_wang@outlook.com>
Link: https://lore.kernel.org/all/20250413224922.69719-3-inochiama@gmail.com
|
|
The recently introduced msi_parent_ops::chip_flags sets irq_eoi()/irq_ack()
conditionally, but MIP driver has not been updated. Populate chip_flags
with EOI | ACK flags.
Fixes: 32c6c054661a ("irqchip: Add Broadcom BCM2712 MSI-X interrupt controller")
Signed-off-by: Stanimir Varbanov <svarbanov@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250407125918.3021454-1-svarbanov@suse.de
|
|
Conversion was done with Coccinelle and a few manual fixups.
In a few interrupt chip callbacks this changes replaces
raw_spin_lock_irqsave() with a guard(raw_spinlock). That's intended and
correct because those interrupt chip callbacks are invoked with the
interrupt descriptor lock held and interrupts disabled. No point in using
the irqsave variant.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/all/20250313142524.325627746@linutronix.de
|
|
Add a driver for the interrupt controller in the EcoNet EN751221 MIPS SoC.
Signed-off-by: Caleb James DeLisle <cjd@cjdns.fr>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250330170306.2584136-4-cjd@cjdns.fr
|
|
The sg2042-msi driver uses the fallback callbacks set by
msi_lib_init_dev_msi_info(). commit 1c000dcaad2b ("irqchip/irq-msi-lib:
Optionally set default irq_eoi()/irq_ack()") changed the behavior of the
fallback mechanism by making it opt-in.
The sg2042-msi was not fixed up for this, which causes a NULL pointer
dereference due to the missing irq_ack() callback.
Add the missing chip flag to msi_parent_ops.
Fixes: c66741549424 ("irqchip: Add the Sophgo SG2042 MSI interrupt controller")
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250217085657.789309-3-apatel@ventanamicro.com
Link: https://lore.kernel.org/all/20250405055625.1530180-1-inochiama@gmail.com
|
|
Naming interrupt domains host is confusing at best and the irqdomain code
uses both domain and host inconsistently.
Therefore rename irq_get_default_host() to irq_get_default_domain().
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250319092951.37667-4-jirislaby@kernel.org
|
