| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Check 5-level paging capability for 57 bits address width instead of
checking 1GB large page capability.
Fixes: 53fc7ad6edf2 ("iommu/vt-d: Correctly calculate sagaw value of IOMMU")
Cc: stable@vger.kernel.org
Reported-by: Raghunathan Srinivasan <raghunathan.srinivasan@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Raghunathan Srinivasan <raghunathan.srinivasan@intel.com>
Link: https://lore.kernel.org/r/20220916071212.2223869-2-yi.l.liu@intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
This reverts commit 9cd4f1434479f1ac25c440c421fbf52069079914.
Some issues were reported on the original commit. Some thunderbolt devices
don't work anymore due to the following DMA fault.
DMAR: DRHD: handling fault status reg 2
DMAR: [INTR-REMAP] Request device [09:00.0] fault index 0x8080
[fault reason 0x25]
Blocked a compatibility format interrupt request
Bring it back for now to avoid functional regression.
Fixes: 9cd4f1434479f ("iommu/vt-d: Fix possible recursive locking in intel_iommu_init()")
Link: https://lore.kernel.org/linux-iommu/485A6EA5-6D58-42EA-B298-8571E97422DE@getmailspring.com/
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216497
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: <stable@vger.kernel.org> # 5.19.x
Reported-and-tested-by: George Hilliard <thirtythreeforty@gmail.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20220920081701.3453504-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The AMD IOMMU driver cannot activate PASID mode on a RID without the RID's
translation being set to IDENTITY. Further it requires changing the RID's
page table layout from the normal v1 IOMMU_DOMAIN_IDENTITY layout to a
different v2 layout.
It does this by creating a new iommu_domain, configuring that domain for
v2 identity operation and then attaching it to the group, from within the
driver. This logic assumes the group is already set to the IDENTITY domain
and is being used by the DMA API.
However, since the ownership logic is based on the group's domain pointer
equaling the default domain to detect DMA API ownership, this causes it to
look like the group is not attached to the DMA API any more. This blocks
attaching drivers to any other devices in the group.
In a real system this manifests itself as the HD-audio devices on some AMD
platforms losing their device drivers.
Work around this unique behavior of the AMD driver by checking for
equality of IDENTITY domains based on their type, not their pointer
value. This allows the AMD driver to have two IDENTITY domains for
internal purposes without breaking the check.
Have the AMD driver properly declare that the special domain it created is
actually an IDENTITY domain.
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: stable@vger.kernel.org
Fixes: 512881eacfa7 ("bus: platform,amba,fsl-mc,PCI: Add device DMA ownership management")
Reported-by: Takashi Iwai <tiwai@suse.de>
Tested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/0-v1-ea566e16b06b+811-amd_owner_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The global rwsem dmar_global_lock was introduced by commit 3a5670e8ac932
("iommu/vt-d: Introduce a rwsem to protect global data structures"). It
is used to protect DMAR related global data from DMAR hotplug operations.
The dmar_global_lock used in the intel_iommu_init() might cause recursive
locking issue, for example, intel_iommu_get_resv_regions() is taking the
dmar_global_lock from within a section where intel_iommu_init() already
holds it via probe_acpi_namespace_devices().
Using dmar_global_lock in intel_iommu_init() could be relaxed since it is
unlikely that any IO board must be hot added before the IOMMU subsystem is
initialized. This eliminates the possible recursive locking issue by moving
down DMAR hotplug support after the IOMMU is initialized and removing the
uses of dmar_global_lock in intel_iommu_init().
Fixes: d5692d4af08cd ("iommu/vt-d: Fix suspicious RCU usage in probe_acpi_namespace_devices()")
Reported-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/894db0ccae854b35c73814485569b634237b5538.1657034828.git.robin.murphy@arm.com
Link: https://lore.kernel.org/r/20220718235325.3952426-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Commit e8ae0e140c05 ("vfio: Require that devices support DMA cache
coherence") requires IOMMU drivers to advertise
IOMMU_CAP_CACHE_COHERENCY, in order to be used by VFIO. Since VFIO does
not provide to userspace the ability to maintain coherency through cache
invalidations, it requires hardware coherency. Advertise the capability
in order to restore VFIO support.
The meaning of IOMMU_CAP_CACHE_COHERENCY also changed from "IOMMU can
enforce cache coherent DMA transactions" to "IOMMU_CACHE is supported".
While virtio-iommu cannot enforce coherency (of PCIe no-snoop
transactions), it does support IOMMU_CACHE.
We can distinguish different cases of non-coherent DMA:
(1) When accesses from a hardware endpoint are not coherent. The host
would describe such a device using firmware methods ('dma-coherent'
in device-tree, '_CCA' in ACPI), since they are also needed without
a vIOMMU. In this case mappings are created without IOMMU_CACHE.
virtio-iommu doesn't need any additional support. It sends the same
requests as for coherent devices.
(2) When the physical IOMMU supports non-cacheable mappings. Supporting
those would require a new feature in virtio-iommu, new PROBE request
property and MAP flags. Device drivers would use a new API to
discover this since it depends on the architecture and the physical
IOMMU.
(3) When the hardware supports PCIe no-snoop. It is possible for
assigned PCIe devices to issue no-snoop transactions, and the
virtio-iommu specification is lacking any mention of this.
Arm platforms don't necessarily support no-snoop, and those that do
cannot enforce coherency of no-snoop transactions. Device drivers
must be careful about assuming that no-snoop transactions won't end
up cached; see commit e02f5c1bb228 ("drm: disable uncached DMA
optimization for ARM and arm64"). On x86 platforms, the host may or
may not enforce coherency of no-snoop transactions with the physical
IOMMU. But according to the above commit, on x86 a driver which
assumes that no-snoop DMA is compatible with uncached CPU mappings
will also work if the host enforces coherency.
Although these issues are not specific to virtio-iommu, it could be
used to facilitate discovery and configuration of no-snoop. This
would require a new feature bit, PROBE property and ATTACH/MAP
flags.
Cc: stable@vger.kernel.org
Fixes: e8ae0e140c05 ("vfio: Require that devices support DMA cache coherence")
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20220825154622.86759-1-jean-philippe@linaro.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
With CONFIG_INTEL_IOMMU_DEBUGFS enabled, below lockdep splat are seen
when an I/O fault occurs on a machine with an Intel IOMMU in it.
DMAR: DRHD: handling fault status reg 3
DMAR: [DMA Write NO_PASID] Request device [00:1a.0] fault addr 0x0
[fault reason 0x05] PTE Write access is not set
DMAR: Dump dmar0 table entries for IOVA 0x0
DMAR: root entry: 0x0000000127f42001
DMAR: context entry: hi 0x0000000000001502, low 0x000000012d8ab001
================================
WARNING: inconsistent lock state
5.20.0-0.rc0.20220812git7ebfc85e2cd7.10.fc38.x86_64 #1 Not tainted
--------------------------------
inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-W} usage.
rngd/1006 [HC1[1]:SC0[0]:HE0:SE1] takes:
ff177021416f2d78 (&k->k_lock){?.+.}-{2:2}, at: klist_next+0x1b/0x160
{HARDIRQ-ON-W} state was registered at:
lock_acquire+0xce/0x2d0
_raw_spin_lock+0x33/0x80
klist_add_tail+0x46/0x80
bus_add_device+0xee/0x150
device_add+0x39d/0x9a0
add_memory_block+0x108/0x1d0
memory_dev_init+0xe1/0x117
driver_init+0x43/0x4d
kernel_init_freeable+0x1c2/0x2cc
kernel_init+0x16/0x140
ret_from_fork+0x1f/0x30
irq event stamp: 7812
hardirqs last enabled at (7811): [<ffffffff85000e86>] asm_sysvec_apic_timer_interrupt+0x16/0x20
hardirqs last disabled at (7812): [<ffffffff84f16894>] irqentry_enter+0x54/0x60
softirqs last enabled at (7794): [<ffffffff840ff669>] __irq_exit_rcu+0xf9/0x170
softirqs last disabled at (7787): [<ffffffff840ff669>] __irq_exit_rcu+0xf9/0x170
The klist iterator functions using spin_*lock_irq*() but the klist
insertion functions using spin_*lock(), combined with the Intel DMAR
IOMMU driver iterating over klists from atomic (hardirq) context, where
pci_get_domain_bus_and_slot() calls into bus_find_device() which iterates
over klists.
As currently there's no plan to fix the klist to make it safe to use in
atomic context, this fixes the lockdep splat by avoid calling
pci_get_domain_bus_and_slot() in the hardirq context.
Fixes: 8ac0b64b9735 ("iommu/vt-d: Use pci_get_domain_bus_and_slot() in pgtable_walk()")
Reported-by: Lennert Buytenhek <buytenh@wantstofly.org>
Link: https://lore.kernel.org/linux-iommu/Yvo2dfpEh%2FWC+Wrr@wantstofly.org/
Link: https://lore.kernel.org/linux-iommu/YvyBdPwrTuHHbn5X@wantstofly.org/
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20220819015949.4795-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The per domain spinlock is acquired in iommu_flush_dev_iotlb(), which
is possbile to be called in the interrupt context. For example, the
drm-intel's CI system got completely blocked with below error:
WARNING: inconsistent lock state
6.0.0-rc1-CI_DRM_11990-g6590d43d39b9+ #1 Not tainted
--------------------------------
inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
swapper/6/0 [HC0[0]:SC1[1]:HE1:SE0] takes:
ffff88810440d678 (&domain->lock){+.?.}-{2:2}, at: iommu_flush_dev_iotlb.part.61+0x23/0x80
{SOFTIRQ-ON-W} state was registered at:
lock_acquire+0xd3/0x310
_raw_spin_lock+0x2a/0x40
domain_update_iommu_cap+0x20b/0x2c0
intel_iommu_attach_device+0x5bd/0x860
__iommu_attach_device+0x18/0xe0
bus_iommu_probe+0x1f3/0x2d0
bus_set_iommu+0x82/0xd0
intel_iommu_init+0xe45/0x102a
pci_iommu_init+0x9/0x31
do_one_initcall+0x53/0x2f0
kernel_init_freeable+0x18f/0x1e1
kernel_init+0x11/0x120
ret_from_fork+0x1f/0x30
irq event stamp: 162354
hardirqs last enabled at (162354): [<ffffffff81b59274>] _raw_spin_unlock_irqrestore+0x54/0x70
hardirqs last disabled at (162353): [<ffffffff81b5901b>] _raw_spin_lock_irqsave+0x4b/0x50
softirqs last enabled at (162338): [<ffffffff81e00323>] __do_softirq+0x323/0x48e
softirqs last disabled at (162349): [<ffffffff810c1588>] irq_exit_rcu+0xb8/0xe0
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&domain->lock);
<Interrupt>
lock(&domain->lock);
*** DEADLOCK ***
1 lock held by swapper/6/0:
This coverts the spin_lock/unlock() into the irq save/restore varieties
to fix the recursive locking issues.
Fixes: ffd5869d93530 ("iommu/vt-d: Replace spin_lock_irqsave() with spin_lock()")
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20220817025650.3253959-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The Intel IOMMU driver possibly selects between the first-level and the
second-level translation tables for DMA address translation. However,
the levels of page-table walks for the 4KB base page size are calculated
from the SAGAW field of the capability register, which is only valid for
the second-level page table. This causes the IOMMU driver to stop working
if the hardware (or the emulated IOMMU) advertises only first-level
translation capability and reports the SAGAW field as 0.
This solves the above problem by considering both the first level and the
second level when calculating the supported page table levels.
Fixes: b802d070a52a1 ("iommu/vt-d: Use iova over first level")
Cc: stable@vger.kernel.org
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20220817023558.3253263-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The translation table copying code for kdump kernels is currently based
on the extended root/context entry formats of ECS mode defined in older
VT-d v2.5, and doesn't handle the scalable mode formats. This causes
the kexec capture kernel boot failure with DMAR faults if the IOMMU was
enabled in scalable mode by the previous kernel.
The ECS mode has already been deprecated by the VT-d spec since v3.0 and
Intel IOMMU driver doesn't support this mode as there's no real hardware
implementation. Hence this converts ECS checking in copying table code
into scalable mode.
The existing copying code consumes a bit in the context entry as a mark
of copied entry. It needs to work for the old format as well as for the
extended context entries. As it's hard to find such a common bit for both
legacy and scalable mode context entries. This replaces it with a per-
IOMMU bitmap.
Fixes: 7373a8cc38197 ("iommu/vt-d: Setup context and enable RID2PASID support")
Cc: stable@vger.kernel.org
Reported-by: Jerry Snitselaar <jsnitsel@redhat.com>
Tested-by: Wen Jin <wen.jin@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20220817011035.3250131-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
We started using a 64 bit completion value. Unfortunately, we only
stored the low 32-bits, so a very large completion value would never
be matched in iommu_completion_wait().
Fixes: c69d89aff393 ("iommu/amd: Use 4K page for completion wait write-back semaphore")
Signed-off-by: John Sperbeck <jsperbeck@google.com>
Link: https://lore.kernel.org/r/20220801192229.3358786-1-jsperbeck@google.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
This reverts commit b09796d528bbf06e3e10a4a8f78038719da7ebc6.
An issue was reported[1] on the original commit. I'll need to address that
before I can delete the use of driver_deferred_probe_check_state(). So,
bring it back for now.
[1] - https://lore.kernel.org/lkml/4799738.LvFx2qVVIh@steina-w/
Fixes: b09796d528bb ("iommu/of: Delete usage of driver_deferred_probe_check_state()")
Reported-by: Jean-Philippe Brucker <jpb@kernel.org>
Tested-by: Jean-Philippe Brucker <jpb@kernel.org>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20220819221616.2107893-5-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent
Pull irqchip fixes from Marc Zyngier:
- A bunch of small fixes for the recently merged LoongArch drivers
- A leftover from the non-SMP IRQ affinity rework affecting
the Hyper-V IOMMU code
Link: https://lore.kernel.org/r/20220812125910.2227338-1-maz@kernel.org
|
|
Pull bitmap updates from Yury Norov:
- fix the duplicated comments on bitmap_to_arr64() (Qu Wenruo)
- optimize out non-atomic bitops on compile-time constants (Alexander
Lobakin)
- cleanup bitmap-related headers (Yury Norov)
- x86/olpc: fix 'logical not is only applied to the left hand side'
(Alexander Lobakin)
- lib/nodemask: inline wrappers around bitmap (Yury Norov)
* tag 'bitmap-6.0-rc1' of https://github.com/norov/linux: (26 commits)
lib/nodemask: inline next_node_in() and node_random()
powerpc: drop dependency on <asm/machdep.h> in archrandom.h
x86/olpc: fix 'logical not is only applied to the left hand side'
lib/cpumask: move some one-line wrappers to header file
headers/deps: mm: align MANITAINERS and Docs with new gfp.h structure
headers/deps: mm: Split <linux/gfp_types.h> out of <linux/gfp.h>
headers/deps: mm: Optimize <linux/gfp.h> header dependencies
lib/cpumask: move trivial wrappers around find_bit to the header
lib/cpumask: change return types to unsigned where appropriate
cpumask: change return types to bool where appropriate
lib/bitmap: change type of bitmap_weight to unsigned long
lib/bitmap: change return types to bool where appropriate
arm: align find_bit declarations with generic kernel
iommu/vt-d: avoid invalid memory access via node_online(NUMA_NO_NODE)
lib/test_bitmap: test the tail after bitmap_to_arr64()
lib/bitmap: fix off-by-one in bitmap_to_arr64()
lib: test_bitmap: add compile-time optimization/evaluations assertions
bitmap: don't assume compiler evaluates small mem*() builtins calls
net/ice: fix initializing the bitmap in the switch code
bitops: let optimize out non-atomic bitops on compile-time constants
...
|
|
This reverts commit 4bf7fda4dce22214c70c49960b1b6438e6260b67.
It turns out that it was hopelessly naive to think that this would work,
considering that we've always done this. The first machine I actually
tested this on broke at bootup, getting to
Reached target cryptsetup.target - Local Encrypted Volumes.
and then hanging. It's unclear what actually fails, since there's a lot
else going on around that time (eg amdgpu probing also happens around
that same time, but it could be some other random init thing that didn't
complete earlier and just caused the boot to hang at that point).
The expectations that we should default to some unsafe and untested mode
seems entirely unfounded, and the belief that this wouldn't affect
modern systems is clearly entirely false. The machine in question is
about two years old, so it's not exactly shiny, but it's also not some
dusty old museum piece PDP-11 in a closet.
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: John Garry <john.garry@huawei.com>
Cc: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- convert arm32 to the common dma-direct code (Arnd Bergmann, Robin
Murphy, Christoph Hellwig)
- restructure the PCIe peer to peer mapping support (Logan Gunthorpe)
- allow the IOMMU code to communicate an optional DMA mapping length
and use that in scsi and libata (John Garry)
- split the global swiotlb lock (Tianyu Lan)
- various fixes and cleanup (Chao Gao, Dan Carpenter, Dongli Zhang,
Lukas Bulwahn, Robin Murphy)
* tag 'dma-mapping-5.20-2022-08-06' of git://git.infradead.org/users/hch/dma-mapping: (45 commits)
swiotlb: fix passing local variable to debugfs_create_ulong()
dma-mapping: reformat comment to suppress htmldoc warning
PCI/P2PDMA: Remove pci_p2pdma_[un]map_sg()
RDMA/rw: drop pci_p2pdma_[un]map_sg()
RDMA/core: introduce ib_dma_pci_p2p_dma_supported()
nvme-pci: convert to using dma_map_sgtable()
nvme-pci: check DMA ops when indicating support for PCI P2PDMA
iommu/dma: support PCI P2PDMA pages in dma-iommu map_sg
iommu: Explicitly skip bus address marked segments in __iommu_map_sg()
dma-mapping: add flags to dma_map_ops to indicate PCI P2PDMA support
dma-direct: support PCI P2PDMA pages in dma-direct map_sg
dma-mapping: allow EREMOTEIO return code for P2PDMA transfers
PCI/P2PDMA: Introduce helpers for dma_map_sg implementations
PCI/P2PDMA: Attempt to set map_type if it has not been set
lib/scatterlist: add flag for indicating P2PDMA segments in an SGL
swiotlb: clean up some coding style and minor issues
dma-mapping: update comment after dmabounce removal
scsi: sd: Add a comment about limiting max_sectors to shost optimal limit
ata: libata-scsi: cap ata_device->max_sectors according to shost->max_sectors
scsi: scsi_transport_sas: cap shost opt_sectors according to DMA optimal limit
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
- The most intrusive patch is small and changes the default allocation
policy for DMA addresses.
Before the change the allocator tried its best to find an address in
the first 4GB. But that lead to performance problems when that space
gets exhaused, and since most devices are capable of 64-bit DMA these
days, we changed it to search in the full DMA-mask range from the
beginning.
This change has the potential to uncover bugs elsewhere, in the
kernel or the hardware. There is a Kconfig option and a command line
option to restore the old behavior, but none of them is enabled by
default.
- Add Robin Murphy as reviewer of IOMMU code and maintainer for the
dma-iommu and iova code
- Chaning IOVA magazine size from 1032 to 1024 bytes to save memory
- Some core code cleanups and dead-code removal
- Support for ACPI IORT RMR node
- Support for multiple PCI domains in the AMD-Vi driver
- ARM SMMU changes from Will Deacon:
- Add even more Qualcomm device-tree compatible strings
- Support dumping of IMP DEF Qualcomm registers on TLB sync
timeout
- Fix reference count leak on device tree node in Qualcomm driver
- Intel VT-d driver updates from Lu Baolu:
- Make intel-iommu.h private
- Optimize the use of two locks
- Extend the driver to support large-scale platforms
- Cleanup some dead code
- MediaTek IOMMU refactoring and support for TTBR up to 35bit
- Basic support for Exynos SysMMU v7
- VirtIO IOMMU driver gets a map/unmap_pages() implementation
- Other smaller cleanups and fixes
* tag 'iommu-updates-v5.20-or-v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (116 commits)
iommu/amd: Fix compile warning in init code
iommu/amd: Add support for AVIC when SNP is enabled
iommu/amd: Simplify and Consolidate Virtual APIC (AVIC) Enablement
ACPI/IORT: Fix build error implicit-function-declaration
drivers: iommu: fix clang -wformat warning
iommu/arm-smmu: qcom_iommu: Add of_node_put() when breaking out of loop
iommu/arm-smmu-qcom: Add SM6375 SMMU compatible
dt-bindings: arm-smmu: Add compatible for Qualcomm SM6375
MAINTAINERS: Add Robin Murphy as IOMMU SUBSYTEM reviewer
iommu/amd: Do not support IOMMUv2 APIs when SNP is enabled
iommu/amd: Do not support IOMMU_DOMAIN_IDENTITY after SNP is enabled
iommu/amd: Set translation valid bit only when IO page tables are in use
iommu/amd: Introduce function to check and enable SNP
iommu/amd: Globally detect SNP support
iommu/amd: Process all IVHDs before enabling IOMMU features
iommu/amd: Introduce global variable for storing common EFR and EFR2
iommu/amd: Introduce Support for Extended Feature 2 Register
iommu/amd: Change macro for IOMMU control register bit shift to decimal value
iommu/exynos: Enable default VM instance on SysMMU v7
iommu/exynos: Add SysMMU v7 register set
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core / kernfs updates from Greg KH:
"Here is the set of driver core and kernfs changes for 6.0-rc1.
The "biggest" thing in here is some scalability improvements for
kernfs for large systems. Other than that, included in here are:
- arch topology and cache info changes that have been reviewed and
discussed a lot.
- potential error path cleanup fixes
- deferred driver probe cleanups
- firmware loader cleanups and tweaks
- documentation updates
- other small things
All of these have been in the linux-next tree for a while with no
reported problems"
* tag 'driver-core-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (63 commits)
docs: embargoed-hardware-issues: fix invalid AMD contact email
firmware_loader: Replace kmap() with kmap_local_page()
sysfs docs: ABI: Fix typo in comment
kobject: fix Kconfig.debug "its" grammar
kernfs: Fix typo 'the the' in comment
docs: driver-api: firmware: add driver firmware guidelines. (v3)
arch_topology: Fix cache attributes detection in the CPU hotplug path
ACPI: PPTT: Leave the table mapped for the runtime usage
cacheinfo: Use atomic allocation for percpu cache attributes
drivers/base: fix userspace break from using bin_attributes for cpumap and cpulist
MAINTAINERS: Change mentions of mpm to olivia
docs: ABI: sysfs-devices-soc: Update Lee Jones' email address
docs: ABI: sysfs-class-pwm: Update Lee Jones' email address
Documentation/process: Add embargoed HW contact for LLVM
Revert "kernfs: Change kernfs_notify_list to llist."
ACPI: Remove the unused find_acpi_cpu_cache_topology()
arch_topology: Warn that topology for nested clusters is not supported
arch_topology: Add support for parsing sockets in /cpu-map
arch_topology: Set cluster identifier in each core/thread from /cpu-map
arch_topology: Limit span of cpu_clustergroup_mask()
...
|
|
Recent changes to solve inconsistencies in handling IRQ masks #ifdef
out the affinity field in irq_common_data for non-SMP configurations.
The current code in hyperv_irq_remapping_alloc() gets a compiler error
in that case.
Fix this by using the new irq_data_update_affinity() helper, which
handles the non-SMP case correctly.
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Fixes: aa0813581b8d ("genirq: Provide an IRQ affinity mask in non-SMP configs")
Link: https://lore.kernel.org/r/1658796820-2261-1-git-send-email-mikelley@microsoft.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"Updates for interrupt core and drivers:
Core:
- Fix a few inconsistencies between UP and SMP vs interrupt
affinities
- Small updates and cleanups all over the place
New drivers:
- LoongArch interrupt controller
- Renesas RZ/G2L interrupt controller
Updates:
- Hotpath optimization for SiFive PLIC
- Workaround for broken PLIC edge triggered interrupts
- Simall cleanups and improvements as usual"
* tag 'irq-core-2022-08-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (52 commits)
irqchip/mmp: Declare init functions in common header file
irqchip/mips-gic: Check the return value of ioremap() in gic_of_init()
genirq: Use for_each_action_of_desc in actions_show()
irqchip / ACPI: Introduce ACPI_IRQ_MODEL_LPIC for LoongArch
irqchip: Add LoongArch CPU interrupt controller support
irqchip: Add Loongson Extended I/O interrupt controller support
irqchip/loongson-liointc: Add ACPI init support
irqchip/loongson-pch-msi: Add ACPI init support
irqchip/loongson-pch-pic: Add ACPI init support
irqchip: Add Loongson PCH LPC controller support
LoongArch: Prepare to support multiple pch-pic and pch-msi irqdomain
LoongArch: Use ACPI_GENERIC_GSI for gsi handling
genirq/generic_chip: Export irq_unmap_generic_chip
ACPI: irq: Allow acpi_gsi_to_irq() to have an arch-specific fallback
APCI: irq: Add support for multiple GSI domains
LoongArch: Provisionally add ACPICA data structures
irqdomain: Use hwirq_max instead of revmap_size for NOMAP domains
irqdomain: Report irq number for NOMAP domains
irqchip/gic-v3: Fix comment typo
dt-bindings: interrupt-controller: renesas,rzg2l-irqc: Document RZ/V2L SoC
...
|
|
'virtio', 'x86/vt-d', 'x86/amd' and 'core' into next
|
|
A recent commit introduced these compile warnings:
CC drivers/iommu/amd/init.o
drivers/iommu/amd/init.c:938:12: error: ‘iommu_init_ga_log’ defined but not used [-Werror=unused-function]
938 | static int iommu_init_ga_log(struct amd_iommu *iommu)
| ^~~~~~~~~~~~~~~~~
drivers/iommu/amd/init.c:902:12: error: ‘iommu_ga_log_enable’ defined but not used [-Werror=unused-function]
902 | static int iommu_ga_log_enable(struct amd_iommu *iommu)
| ^~~~~~~~~~~~~~~~~~~
The warnings appear because both functions are defined when IRQ
remapping is not enabled, but only used when IRQ remapping is enabled.
Fix it by only defining the functions when IRQ remapping is enabled.
Fixes: c5e1a1eb9279 ("iommu/amd: Simplify and Consolidate Virtual APIC (AVIC) Enablement")
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20220729100432.22474-1-joro@8bytes.org
|
|
In order to support AVIC on SNP-enabled system, The IOMMU driver needs to
check EFR2[SNPAVICSup] and enables the support by setting SNPAVICEn bit
in the IOMMU control register (MMIO offset 18h).
For detail, please see section "SEV-SNP Guest Virtual APIC Support" of the
AMD I/O Virtualization Technology (IOMMU) Specification.
(https://www.amd.com/system/files/TechDocs/48882_IOMMU.pdf)
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Link: https://lore.kernel.org/r/20220726134348.6438-3-suravee.suthikulpanit@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Currently, enabling AVIC requires individually detect and enable GAM and
GALOG features on each IOMMU, which is difficult to keep track on
multi-IOMMU system, where the features needs to be enabled system-wide.
In addition, these features do not need to be enabled in early stage.
It can be delayed until after amd_iommu_init_pci().
Therefore, consolidate logic for detecting and enabling IOMMU GAM and
GALOG features into a helper function, enable_iommus_vapic(), which uses
the check_feature_on_all_iommus() helper function to ensure system-wide
support of the features before enabling them, and postpone until after
amd_iommu_init_pci().
The new function also check and clean up feature enablement residue from
previous boot (e.g. in case of booting into kdump kernel), which triggers
a WARN_ON (shown below) introduced by the commit a8d4a37d1bb9 ("iommu/amd:
Restore GA log/tail pointer on host resume") in iommu_ga_log_enable().
[ 7.731955] ------------[ cut here ]------------
[ 7.736575] WARNING: CPU: 0 PID: 1 at drivers/iommu/amd/init.c:829 iommu_ga_log_enable.isra.0+0x16f/0x190
[ 7.746135] Modules linked in:
[ 7.749193] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W -------- --- 5.19.0-0.rc7.53.eln120.x86_64 #1
[ 7.759706] Hardware name: Dell Inc. PowerEdge R7525/04D5GJ, BIOS 2.1.6 03/09/2021
[ 7.767274] RIP: 0010:iommu_ga_log_enable.isra.0+0x16f/0x190
[ 7.772931] Code: 20 20 00 00 8b 00 f6 c4 01 74 da 48 8b 44 24 08 65 48 2b 04 25 28 00 00 00 75 13 48 83 c4 10 5b 5d e9 f5 00 72 00 0f 0b eb e1 <0f> 0b eb dd e8 f8 66 42 00 48 8b 15 f1 85 53 01 e9 29 ff ff ff 48
[ 7.791679] RSP: 0018:ffffc90000107d20 EFLAGS: 00010206
[ 7.796905] RAX: ffffc90000780000 RBX: 0000000000000100 RCX: ffffc90000780000
[ 7.804038] RDX: 0000000000000001 RSI: ffffc90000780000 RDI: ffff8880451f9800
[ 7.811170] RBP: ffff8880451f9800 R08: ffffffffffffffff R09: 0000000000000000
[ 7.818303] R10: 0000000000000000 R11: 0000000000000000 R12: 0008000000000000
[ 7.825435] R13: ffff8880462ea900 R14: 0000000000000021 R15: 0000000000000000
[ 7.832572] FS: 0000000000000000(0000) GS:ffff888054a00000(0000) knlGS:0000000000000000
[ 7.840657] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 7.846400] CR2: ffff888054dff000 CR3: 0000000053210000 CR4: 0000000000350eb0
[ 7.853533] Call Trace:
[ 7.855979] <TASK>
[ 7.858085] amd_iommu_enable_interrupts+0x180/0x270
[ 7.863051] ? iommu_setup+0x271/0x271
[ 7.866803] state_next+0x197/0x2c0
[ 7.870295] ? iommu_setup+0x271/0x271
[ 7.874049] iommu_go_to_state+0x24/0x2c
[ 7.877976] amd_iommu_init+0xf/0x29
[ 7.881554] pci_iommu_init+0xe/0x36
[ 7.885133] do_one_initcall+0x44/0x200
[ 7.888975] do_initcalls+0xc8/0xe1
[ 7.892466] kernel_init_freeable+0x14c/0x199
[ 7.896826] ? rest_init+0xd0/0xd0
[ 7.900231] kernel_init+0x16/0x130
[ 7.903723] ret_from_fork+0x22/0x30
[ 7.907306] </TASK>
[ 7.909497] ---[ end trace 0000000000000000 ]---
Fixes: commit a8d4a37d1bb9 ("iommu/amd: Restore GA log/tail pointer on host resume")
Reported-by: Jerry Snitselaar <jsnitsel@redhat.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Maxim Levitsky <mlevitsk@redhat.com>
Cc: Will Deacon <will@kernel.org> (maintainer:IOMMU DRIVERS)
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Link: https://lore.kernel.org/r/20220726134348.6438-2-suravee.suthikulpanit@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Call pci_p2pdma_map_segment() when a PCI P2PDMA page is seen so the bus
address is set in the dma address and the segment is marked with
sg_dma_mark_bus_address(). iommu_map_sg() will then skip these segments.
Then, in __finalise_sg(), copy the dma address from the input segment
to the output segment. __invalidate_sg() must also learn to skip these
segments.
A P2PDMA page may have three possible outcomes when being mapped:
1) If the data path between the two devices doesn't go through
the root port, then it should be mapped with a PCI bus address
2) If the data path goes through the host bridge, it should be mapped
normally with an IOMMU IOVA.
3) It is not possible for the two devices to communicate and thus
the mapping operation should fail (and it will return -EREMOTEIO).
Similar to dma-direct, the sg_dma_mark_pci_p2pdma() flag is used to
indicate bus address segments. On unmap, P2PDMA segments are skipped
over when determining the start and end IOVA addresses.
With this change, the flags variable in the dma_map_ops is set to
DMA_F_PCI_P2PDMA_SUPPORTED to indicate support for P2PDMA pages.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
In order to support PCI P2PDMA mappings with dma-iommu, explicitly skip
any segments marked with sg_dma_mark_bus_address() in __iommu_map_sg().
These segments should not be mapped into the IOVA and will be handled
separately in as subsequent patch for dma-iommu.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
When building with Clang we encounter the following warning:
| drivers/iommu/msm_iommu.c:603:6: error: format specifies type 'unsigned
| short' but the argument has type 'int' [-Werror,-Wformat] sid);
`sid` is an int, use the proper format specifier `%x`.
Link: https://github.com/ClangBuiltLinux/linux/issues/378
Reported-by: Nathan Chancellor <nathan@kernel.org>
Suggested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20220721210331.4012015-1-justinstitt@google.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
In qcom_iommu_has_secure_context(), we should call of_node_put()
for the reference 'child' when breaking out of for_each_child_of_node()
which will automatically increase and decrease the refcount.
Fixes: d051f28c8807 ("iommu/qcom: Initialize secure page table")
Signed-off-by: Liang He <windhl@126.com>
Link: https://lore.kernel.org/r/20220719124955.1242171-1-windhl@126.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Add a compatible for SM6375 to the qcom impl match list.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20220716193223.455859-2-konrad.dybcio@somainline.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Add the IOMMU callback for DMA mapping API dma_opt_mapping_size(), which
allows the drivers to know the optimal mapping limit and thus limit the
requested IOVA lengths.
This value is based on the IOVA rcache range limit, as IOVAs allocated
above this limit must always be newly allocated, which may be quite slow.
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
bitmap_weight() doesn't return negative values, so change it's type
to unsigned long. It may help compiler to generate better code and
catch bugs.
Signed-off-by: Yury Norov <yury.norov@gmail.com>
|
|
The IOMMUv2 APIs (for supporting shared virtual memory with PASID)
configures the domain with IOMMU v2 page table, and sets DTE[Mode]=0.
This configuration cannot be supported on SNP-enabled system.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20220713225651.20758-10-suravee.suthikulpanit@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Once SNP is enabled (by executing SNP_INIT command), IOMMU can no longer
support the passthrough domain (i.e. IOMMU_DOMAIN_IDENTITY).
The SNP_INIT command is called early in the boot process, and would fail
if the kernel is configure to default to passthrough mode.
After the system is already booted, users can try to change IOMMU domain
type of a particular IOMMU group. In this case, the IOMMU driver needs to
check the SNP-enable status and return failure when requesting to change
domain type to identity.
Therefore, return failure when trying to allocate identity domain.
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20220713225651.20758-9-suravee.suthikulpanit@amd.com
[ joro: Removed WARN_ON_ONCE() ]
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
On AMD system with SNP enabled, IOMMU hardware checks the host translation
valid (TV) and guest translation valid (GV) bits in the device table entry
(DTE) before accessing the corresponded page tables.
However, current IOMMU driver sets the TV bit for all devices regardless
of whether the host page table is in use. This results in
ILLEGAL_DEV_TABLE_ENTRY event for devices, which do not the host page
table root pointer set up.
Thefore, when SNP is enabled, only set TV bit when DMA remapping is not
used, which is when domain ID in the AMD IOMMU device table entry (DTE)
is zero.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20220713225651.20758-8-suravee.suthikulpanit@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
To support SNP, IOMMU needs to be enabled, and prohibits IOMMU
configurations where DTE[Mode]=0, which means it cannot be supported with
IOMMU passthrough domain (a.k.a IOMMU_DOMAIN_IDENTITY),
and when AMD IOMMU driver is configured to not use the IOMMU host (v1) page
table. Otherwise, RMP table initialization could cause the system to crash.
The request to enable SNP support in IOMMU must be done before PCI
initialization state of the IOMMU driver because enabling SNP affects
how IOMMU driver sets up IOMMU data structures (i.e. DTE).
Unlike other IOMMU features, SNP feature does not have an enable bit in
the IOMMU control register. Instead, the IOMMU driver introduces
an amd_iommu_snp_en variable to track enabling state of SNP.
Introduce amd_iommu_snp_enable() for other drivers to request enabling
the SNP support in IOMMU, which checks all prerequisites and determines
if the feature can be safely enabled.
Please see the IOMMU spec section 2.12 for further details.
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Co-developed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Link: https://lore.kernel.org/r/20220713225651.20758-7-suravee.suthikulpanit@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Modify existing SNP feature check to use the helper function
check_feature_on_all_iommus() to ensure consistency among all IOMMUs.
Also report IOMMU SNP support information for each IOMMU.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20220713225651.20758-6-suravee.suthikulpanit@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The ACPI IVRS table can contain multiple IVHD blocks. Each block contains
information used to initialize each IOMMU instance.
Currently, init_iommu_all sequentially process IVHD block and initialize
IOMMU instance one-by-one. However, certain features require all IOMMUs
to be configured in the same way system-wide. In case certain IVHD blocks
contain inconsistent information (most likely FW bugs), the driver needs
to go through and try to revert settings on IOMMUs that have already been
configured.
A solution is to split IOMMU initialization into 3 phases:
Phase1 : Processes information of the IVRS table for all IOMMU instances.
This allow all IVHDs to be processed prior to enabling features.
Phase2 : Early feature support check on all IOMMUs (using information in
IVHD blocks.
Phase3 : Iterates through all IOMMU instances and enabling features.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20220713225651.20758-5-suravee.suthikulpanit@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Some IOMMU features require that all IOMMUs must support the feature,
which is determined by checking the support bit in the Extended Feature
Register 1 and 2 (EFR/EFR2) on all IOMMUs. This check is done by the
function check_feature_on_all_iommus(), which iterates through all
IOMMUs everytime it is called.
Instead, introduce a global variable to store common EFR/EFR2 among all
IOMMUs. In case of inconsistent EFR/EFR2 masks are detected on an IOMMU,
a FW_BUG warning is reported.
Suggested-by: Joerg Roedel <joro@8bytes.org>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20220713225651.20758-4-suravee.suthikulpanit@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
AMD IOMMU spec introduces additional extended feature register
in the IVRS IVHD offset 80h (for IVHD type 11h and 40h) and MMIO
offset 1A0h.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20220713225651.20758-3-suravee.suthikulpanit@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
There is no functional change.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20220713225651.20758-2-suravee.suthikulpanit@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
In order to enable SysMMU v7 with VM register layout, at least the
default VM instance (n=0) must be enabled, in addition to enabling the
SysMMU itself. To do so, add corresponding write to MMU_CTRL_VM[0]
register, before writing to MMU_CTRL register.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20220714165550.8884-7-semen.protsenko@linaro.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
SysMMU v7 might have different register layouts (VM capable or non-VM
capable). Virtual Machine registers (if present) implement multiple
translation domains. If VM registers are not present, the driver
shouldn't try to access those.
Check which layout is implemented in current SysMMU module (by reading
the capability registers) and prepare the corresponding variant
structure for further usage.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20220714165550.8884-6-semen.protsenko@linaro.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
At the moment the driver supports SysMMU v1..v5 versions. SysMMU v5 has
different register layout than SysMMU v1..v3. Instead of checking the
version each time before reading/writing the registers, let's create
corresponding register structure for each SysMMU version and set the
needed structure on init, checking the SysMMU version one single time.
This way is faster and more elegant.
No behavior changes from the user's point of view, it's only a
refactoring patch.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20220714165550.8884-5-semen.protsenko@linaro.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
SysMMU v5+ supports 36 bit physical address space. Set corresponding DMA
mask to avoid falling back to SWTLBIO usage in dma_map_single() because
of failed dma_capable() check.
The original code for this fix was suggested by Marek.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Co-developed-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220714165550.8884-4-semen.protsenko@linaro.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
If iommu_device_register() fails in exynos_sysmmu_probe(), the previous
calls have to be cleaned up. In this case, the iommu_device_sysfs_add()
should be cleaned up, by calling its remove counterpart call.
Fixes: d2c302b6e8b1 ("iommu/exynos: Make use of iommu_device_register interface")
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20220714165550.8884-3-semen.protsenko@linaro.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Using SZ_4K in context of SysMMU driver is better than using PAGE_SIZE,
as PAGE_SIZE might have different value on different platforms. Though
it would be even better to use more specific constants, already existing
in SysMMU driver. Make the code more strict by using SPAGE_ORDER and
SPAGE_SIZE constants.
It also makes sense, as __sysmmu_tlb_invalidate_entry() also uses
SPAGE_* constants for further calculations with num_inv param, so it's
logical that num_inv should be previously calculated using also SPAGE_*
values.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20220714165550.8884-2-semen.protsenko@linaro.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
mtk_iommu_mm_dts_parse() can fail with EPROBE_DEFER if not all larbs
have probed yet, so use dev_err_probe() to avoid logging as an error in
that case. Also drop the return value from the message since it's
already printed by dev_err_probe(), and add the missing newline at the
end.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220712214427.544860-1-nfraprado@collabora.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The g_iommus and g_num_of_iommus is not used anywhere. Remove them to
avoid dead code.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Steve Wahl <steve.wahl@hpe.com>
Link: https://lore.kernel.org/r/20220702015610.2849494-6-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The Intel IOMMU hot-add process starts from dmar_device_hotplug(). It
uses the global dmar_global_lock to synchronize all the hot-add and
hot-remove paths. In the hot-add path, the new IOMMU data structures
are allocated firstly by dmar_parse_one_drhd() and then initialized by
dmar_hp_add_drhd(). All the IOMMU units are allocated and initialized
in the same synchronized path. There is no case where any IOMMU unit
is created and then initialized for multiple times.
This removes the unnecessary check in intel_iommu_add() which is the
last reference place of the global IOMMU array.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Steve Wahl <steve.wahl@hpe.com>
Link: https://lore.kernel.org/r/20220702015610.2849494-5-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
When a DMA domain is attached to a device, it needs to allocate a domain
ID from its IOMMU. Currently, the domain ID information is stored in two
static arrays embedded in the domain structure. This can lead to memory
waste when the driver is running on a small platform.
This optimizes these static arrays by replacing them with an xarray and
consuming memory on demand.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Steve Wahl <steve.wahl@hpe.com>
Link: https://lore.kernel.org/r/20220702015610.2849494-4-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Switch dmar unit sequence id allocation and release from bitmap to IDA
interface.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Steve Wahl <steve.wahl@hpe.com>
Link: https://lore.kernel.org/r/20220702015610.2849494-3-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
