summaryrefslogtreecommitdiff
path: root/drivers/interconnect
AgeCommit message (Collapse)AuthorFilesLines
2020-09-08interconnect: qcom: sc7180: Replace xlate with xlate_extendedSibi Sankar1-1/+1
Use the qcom_icc_xlate_extended() in order to parse tags, that are specified as an additional arguments to the path endpoints in DT. Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Tested-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Link: https://lore.kernel.org/r/20200903133134.17201-7-georgi.djakov@linaro.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-09-08interconnect: qcom: sdm845: Replace xlate with xlate_extendedGeorgi Djakov1-1/+1
Use the qcom_icc_xlate_extended() in order to parse tags, that are specified as an additional arguments to the path endpoints in DT. Tested-by: Sibi Sankar <sibis@codeaurora.org> Reviewed-by: Sibi Sankar <sibis@codeaurora.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Link: https://lore.kernel.org/r/20200903133134.17201-5-georgi.djakov@linaro.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-09-08interconnect: qcom: Implement xlate_extended() to parse tagsGeorgi Djakov2-0/+28
Implement a function to parse the arguments of the "interconnects" DT property and populate the interconnect path tags if this information is available. Tested-by: Sibi Sankar <sibis@codeaurora.org> Reviewed-by: Sibi Sankar <sibis@codeaurora.org> Link: https://lore.kernel.org/r/20200903133134.17201-4-georgi.djakov@linaro.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-09-08interconnect: Introduce xlate_extended() callbackGeorgi Djakov1-23/+50
Currently there is the xlate() callback, which is used by providers for mapping the nodes from phandle arguments. That's fine for simple mappings, but the phandle arguments could contain an additional data, such as tag information. Let's create another callback xlate_extended() for the cases where providers want also populate the path tag data. Tested-by: Sibi Sankar <sibis@codeaurora.org> Reviewed-by: Sibi Sankar <sibis@codeaurora.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Tested-by: Matthias Kaehlcke <mka@chromium.org> Link: https://lore.kernel.org/r/20200903133134.17201-2-georgi.djakov@linaro.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-09-08interconnect: qcom: Add support for per-BCM scaling factorsMike Tipton3-2/+7
Currently, bcm-voter always assumes requests are made in KBps and that BCM HW always wants them in Bps, so it always scales the requests by 1000. However, certain use cases and BCMs may use different units. Thus, add support for BCM-specific scaling factors. Signed-off-by: Mike Tipton <mdtipton@codeaurora.org> Link: https://lore.kernel.org/r/20200903192149.30385-7-mdtipton@codeaurora.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-09-08interconnect: qcom: Only wait for completion in AMC/WAKE by defaultMike Tipton1-1/+1
Change the default TCS wait behavior to only wait for completion in AMC and WAKE. Waiting isn't necessary in the SLEEP TCS, since votes are only being removed in this case. Resources can be safely disabled asynchronously in parallel with the rest of the power collapse sequence. This reduces the sleep entry latency. Signed-off-by: Mike Tipton <mdtipton@codeaurora.org> Link: https://lore.kernel.org/r/20200903192149.30385-6-mdtipton@codeaurora.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-09-08interconnect: qcom: Support bcm-voter-specific TCS wait behaviorMike Tipton1-11/+21
Currently, all bcm-voters set tcs_cmd::wait=true for the last VCD command in each TCS (AMC, WAKE, and SLEEP). However, some bcm-voters don't need the completion and instead need to optimize for latency. For instance, disabling wait-for-completion in the WAKE set can decrease resume latency and allow for certain operations to occur in parallel with the WAKE TCS triggering. This is only safe in very specific situations. Keep the default behavior of always waiting, but allow it to be overridden in devicetree. Signed-off-by: Mike Tipton <mdtipton@codeaurora.org> Link: https://lore.kernel.org/r/20200903192149.30385-5-mdtipton@codeaurora.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-09-08dt-bindings: interconnect: Add generic qcom bindingsMike Tipton1-16/+2
Add generic qcom interconnect bindings that are common across platforms. In particular, these include QCOM_ICC_TAG_* macros that clients can use when calling icc_set_tag(). Signed-off-by: Mike Tipton <mdtipton@codeaurora.org> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20200903192149.30385-3-mdtipton@codeaurora.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-09-08interconnect: qcom: Add SM8250 interconnect provider driverJonathan Marek4-0/+825
Add driver for the Qualcomm interconnect buses found in SM8250 based platforms. The topology consists of several NoCs that are controlled by a remote processor that collects the aggregated bandwidth for each master-slave pairs. Based on SC7180 driver and generated from downstream dts. Signed-off-by: Jonathan Marek <jonathan@marek.ca> Reviewed-by: Sibi Sankar <sibis@codeaurora.org> Link: https://lore.kernel.org/r/20200728023811.5607-6-jonathan@marek.ca Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-09-08interconnect: qcom: Add SM8150 interconnect provider driverJonathan Marek4-0/+799
Add driver for the Qualcomm interconnect buses found in SM8150 based platforms. The topology consists of several NoCs that are controlled by a remote processor that collects the aggregated bandwidth for each master-slave pairs. Based on SC7180 driver and generated from downstream dts. Signed-off-by: Jonathan Marek <jonathan@marek.ca> Reviewed-by: Sibi Sankar <sibis@codeaurora.org> Link: https://lore.kernel.org/r/20200728023811.5607-5-jonathan@marek.ca Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-09-08interconnect: Add bulk API helpersGeorgi Djakov2-1/+118
There are drivers which just need to get multiple interconnect paths, request some predefined amounts of bandwidth and then just toggle the paths between enabled/disabled state. The aim of this patch is simplify the above and to allow drivers to put all the path names and bandwidth data into a single static icc_bulk_data table and call the icc_bulk_* functions on that table in order to scale all the interconnect paths in parallel. Suggested-by: Evan Green <evgreen@chromium.org> Suggested-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20200729123439.9961-1-georgi.djakov@linaro.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-09-04interconnect: qcom: Fix small BW votes being truncated to zeroMike Tipton1-8/+19
Small BW votes that translate to less than a single BCM unit are currently truncated to zero. Ensure that non-zero BW requests always result in at least a vote of 1 to BCM. Fixes: 976daac4a1c5 ("interconnect: qcom: Consolidate interconnect RPMh support") Signed-off-by: Mike Tipton <mdtipton@codeaurora.org> Link: https://lore.kernel.org/r/20200903192149.30385-2-mdtipton@codeaurora.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-09-03interconnect: Show bandwidth for disabled paths as zero in debugfsMatthias Kaehlcke1-2/+8
For disabled paths the 'interconnect_summary' in debugfs currently shows the orginally requested bandwidths. This is confusing, since the bandwidth requests aren't active. Instead show the bandwidths for disabled paths/requests as zero. Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Evan Green <evgreen@chromium.org> Link: https://lore.kernel.org/r/20200729104933.1.If8e80e4c0c7ddf99056f6e726e59505ed4e127f3@changeid Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-08-05Merge tag 'char-misc-5.9-rc1' of ↵Linus Torvalds1-8/+8
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the large set of char and misc and other driver subsystem patches for 5.9-rc1. Lots of new driver submissions in here, and cleanups and features for existing drivers. Highlights are: - habanalabs driver updates - coresight driver updates - nvmem driver updates - huge number of "W=1" build warning cleanups from Lee Jones - dyndbg updates - virtbox driver fixes and updates - soundwire driver updates - mei driver updates - phy driver updates - fpga driver updates - lots of smaller individual misc/char driver cleanups and fixes Full details are in the shortlog. All of these have been in linux-next with no reported issues" * tag 'char-misc-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (322 commits) habanalabs: remove unused but set variable 'ctx_asid' nvmem: qcom-spmi-sdam: Enable multiple devices dt-bindings: nvmem: SID: add binding for A100's SID controller nvmem: update Kconfig description nvmem: qfprom: Add fuse blowing support dt-bindings: nvmem: Add properties needed for blowing fuses dt-bindings: nvmem: qfprom: Convert to yaml nvmem: qfprom: use NVMEM_DEVID_AUTO for multiple instances nvmem: core: add support to auto devid nvmem: core: Add nvmem_cell_read_u8() nvmem: core: Grammar fixes for help text nvmem: sc27xx: add sc2730 efuse support nvmem: Enforce nvmem stride in the sysfs interface MAINTAINERS: Add git tree for NVMEM FRAMEWORK nvmem: sprd: Fix return value of sprd_efuse_probe() drivers: android: Fix the SPDX comment style drivers: android: Fix a variable declaration coding style issue drivers: android: Remove braces for a single statement if-else block drivers: android: Remove the use of else after return drivers: android: Fix a variable declaration coding style issue ...
2020-08-04Merge tag 'arm-drivers-5.9' of ↵Linus Torvalds1-5/+1
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC driver updates from Arnd Bergmann: "A couple of subsystems have their own subsystem maintainers but choose to have the code merged through the soc tree as upstream, as the code tends to be used across multiple SoCs or has SoC specific drivers itself: - memory controllers: Krzysztof Kozlowski takes ownership of the drivers/memory subsystem and its drivers, starting out with a set of cleanup patches. A larger driver for the Tegra memory controller that was accidentally missed for v5.8 is now added. - reset controllers: Only minor updates to drivers/reset this time - firmware: The "turris mox" firmware driver gains support for signed firmware blobs The tegra firmware driver gets extended to export some debug information Various updates to i.MX firmware drivers, mostly cosmetic - ARM SCMI/SCPI: A new mechanism for platform notifications is added, among a number of minor changes. - optee: Probing of the TEE bus is rewritten to better support detection of devices that depend on the tee-supplicant user space. A new firmware based trusted platform module (fTPM) driver is added based on OP-TEE - SoC attributes: A new driver is added to provide a generic soc_device for identifying a machine through the SMCCC ARCH_SOC_ID firmware interface rather than by probing SoC family specific registers. The series also contains some cleanups to the common soc_device code. There are also a number of updates to SoC specific drivers, the main ones are: - Mediatek cmdq driver gains a few in-kernel interfaces - Minor updates to Qualcomm RPMh, socinfo, rpm drivers, mostly adding support for additional SoC variants - The Qualcomm GENI core code gains interconnect path voting and performance level support, and integrating this into a number of device drivers. - A new driver for Samsung Exynos5800 voltage coupler for - Renesas RZ/G2H (R8A774E1) SoC support gets added to a couple of SoC specific device drivers - Updates to the TI K3 Ring Accelerator driver" * tag 'arm-drivers-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (164 commits) soc: qcom: geni: Fix unused label warning soc: qcom: smd-rpm: Fix kerneldoc memory: jz4780_nemc: Only request IO memory the driver will use soc: qcom: pdr: Reorder the PD state indication ack MAINTAINERS: Add Git repository for memory controller drivers memory: brcmstb_dpfe: Fix language typo memory: samsung: exynos5422-dmc: Correct white space issues memory: samsung: exynos-srom: Correct alignment memory: pl172: Enclose macro argument usage in parenthesis memory: of: Correct kerneldoc memory: omap-gpmc: Fix language typo memory: omap-gpmc: Correct white space issues memory: omap-gpmc: Use 'unsigned int' for consistency memory: omap-gpmc: Enclose macro argument usage in parenthesis memory: omap-gpmc: Correct kerneldoc memory: mvebu-devbus: Align with open parenthesis memory: mvebu-devbus: Add missing braces to all arms of if statement memory: bt1-l2-ctl: Add blank lines after declarations soc: TI knav_qmss: make symbol 'knav_acc_range_ops' static firmware: ti_sci: Replace HTTP links with HTTPS ones ...
2020-07-27Merge 5.8-rc7 into char-misc-nextGreg Kroah-Hartman2-10/+16
This should resolve the merge/build issues reported when trying to create linux-next. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-23interconnect: msm8916: Fix buswidth of pcnoc_s nodesGeorgi Djakov1-7/+7
The buswidth of the pcnoc_s_* nodes is actually not 8, but 4 bytes. Let's fix it. Reported-by: Jun Nie <jun.nie@linaro.org> Reviewed-by: Mike Tipton <mdtipton@codeaurora.org> Fixes: 30c8fa3ec61a ("interconnect: qcom: Add MSM8916 interconnect provider driver") Link: https://lore.kernel.org/r/20200709130004.12462-1-georgi.djakov@linaro.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200723083735.5616-3-georgi.djakov@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-23interconnect: Do not skip aggregation for disabled pathsGeorgi Djakov1-3/+9
When an interconnect path is being disabled, currently we don't aggregate the requests for it afterwards. But the re-aggregation step shouldn't be skipped, as it may leave the nodes with outdated bandwidth data. This outdated data may actually keep the path still enabled and prevent the device from going into lower power states. Reported-by: Atul Dhudase <adhudase@codeaurora.org> Fixes: 7d374b209083 ("interconnect: Add helpers for enabling/disabling a path") Reviewed-by: Sibi Sankar <sibis@codeaurora.org> Tested-by: Atul Dhudase <adhudase@codeaurora.org> Reviewed-by: Atul Dhudase <adhudase@codeaurora.org> Link: https://lore.kernel.org/r/20200721120740.3436-1-georgi.djakov@linaro.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Link: https://lore.kernel.org/r/20200723083735.5616-2-georgi.djakov@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-23soc: qcom: rpmh: Update rpmh_invalidate function to return voidMaulik Shah1-5/+1
Currently rpmh_invalidate() always returns success. Update its return type to void. Reviewed-by: Lina Iyer <ilina@codeaurora.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Suggested-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Maulik Shah <mkshah@codeaurora.org> Link: https://lore.kernel.org/r/1592485553-29163-1-git-send-email-mkshah@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-06-16interconnect: Allow inter-provider pairs to be configuredArtur Świgoń1-6/+5
This patch adds support for a new boolean 'inter_set' field in struct icc_provider. Setting it to 'true' enables calling '->set' for inter-provider node pairs. All existing users of the interconnect framework allocate this structure with kzalloc, and are therefore unaffected by this change. This makes it easier for hierarchies like exynos-bus, where every bus is probed separately and registers a separate interconnect provider, to model constraints between buses. Signed-off-by: Artur Świgoń <a.swigon@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200521122841.8867-4-s.nawrocki@samsung.com Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-06-16interconnect: Relax requirement in of_icc_get_from_provider()Artur Świgoń1-1/+1
This patch relaxes the condition in of_icc_get_from_provider() so that it is no longer required to set '#interconnect-cells' to <1> in the DT, and therefore it is not required to supply dummy node IDs in the 'interconnects' property when node IDs are dynamically generated rather than hardcoded (statically allocated). In case of the devfreq driver for exynos-bus, node IDs are dynamically allocated and '#interconnect-cells' is always zero. Signed-off-by: Artur Świgoń <a.swigon@samsung.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Link: https://lore.kernel.org/r/20200521122841.8867-3-s.nawrocki@samsung.com Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-06-16interconnect: Export of_icc_get_from_provider()Artur Świgoń1-1/+2
This patch makes the above function public (for use in exynos-bus devfreq driver). Signed-off-by: Artur Świgoń <a.swigon@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Link: https://lore.kernel.org/r/20200521122841.8867-2-s.nawrocki@samsung.com Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-06-11Merge tag 'pm-5.8-rc1-2' of ↵Linus Torvalds1-0/+18
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more power management updates from Rafael Wysocki: "These are operating performance points (OPP) framework updates mostly, including support for interconnect bandwidth in the OPP core, plus a few cpufreq changes, including boost support in the CPPC cpufreq driver, an ACPI device power management fix and a hibernation code cleanup. Specifics: - Add support for interconnect bandwidth to the OPP core (Georgi Djakov, Saravana Kannan, Sibi Sankar, Viresh Kumar). - Add support for regulator enable/disable to the OPP core (Kamil Konieczny). - Add boost support to the CPPC cpufreq driver (Xiongfeng Wang). - Make the tegra186 cpufreq driver set the CPUFREQ_NEED_INITIAL_FREQ_CHECK flag (Mian Yousaf Kaukab). - Prevent the ACPI power management from using power resources with devices where the list of power resources for power state D0 (full power) is missing (Rafael Wysocki). - Annotate a hibernation-related function with __init (Christophe JAILLET)" * tag 'pm-5.8-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: PM: Avoid using power resources if there are none for D0 cpufreq: CPPC: add SW BOOST support cpufreq: change '.set_boost' to act on one policy PM: hibernate: Add __init annotation to swsusp_header_init() opp: Don't parse icc paths unnecessarily opp: Remove bandwidth votes when target_freq is zero opp: core: add regulators enable and disable opp: Reorder the code for !target_freq case opp: Expose bandwidth information via debugfs cpufreq: dt: Add support for interconnect bandwidth scaling opp: Update the bandwidth on OPP frequency changes opp: Add sanity checks in _read_opp_key() opp: Add support for parsing interconnect bandwidth cpufreq: tegra186: add CPUFREQ_NEED_INITIAL_FREQ_CHECK flag OPP: Add helpers for reading the binding properties dt-bindings: opp: Introduce opp-peak-kBps and opp-avg-kBps bindings
2020-06-01Merge branch 'opp/linux-next' of ↵Rafael J. Wysocki2-25/+74
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm Pull operating performance points (OPP) framework changes for v5.8 from Viresh Kumar: "This contains: - support for interconnect bandwidth in the OPP core (Georgi Djakov, Saravana Kannan, Sibi Sankar, Viresh Kumar). - support for regulator enable/disable (Kamil Konieczny). This is based on three patches from the interconnect tree which shall get merged via Greg's tree." * 'opp/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: opp: Don't parse icc paths unnecessarily opp: Remove bandwidth votes when target_freq is zero opp: core: add regulators enable and disable opp: Reorder the code for !target_freq case opp: Expose bandwidth information via debugfs cpufreq: dt: Add support for interconnect bandwidth scaling opp: Update the bandwidth on OPP frequency changes opp: Add sanity checks in _read_opp_key() opp: Add support for parsing interconnect bandwidth interconnect: Remove unused module exit code from core interconnect: Disallow interconnect core to be built as a module interconnect: Add of_icc_get_by_index() helper function OPP: Add helpers for reading the binding properties dt-bindings: opp: Introduce opp-peak-kBps and opp-avg-kBps bindings
2020-05-29opp: Expose bandwidth information via debugfsViresh Kumar1-0/+18
Expose the bandwidth information as well via debugfs. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-05-22Merge tag 'icc-5.8-rc1' of https://git.linaro.org/people/georgi.djakov/linux ↵Greg Kroah-Hartman11-26/+796
into char-misc-next Georgi writes: interconnect changes for 5.8 These are the interconnect changes for the 5.8-rc1 merge window: Core changes: - Convert the framework core from tristate to bool to make handling dependencies between other core frameworks easier - Add of_icc_get_by_index() - Add devm_of_icc_get() helper function - Add icc_enable() and icc_disable() helpers New drivers: - Platform driver for NXP i.MX8MM SoC - Platform driver for NXP i.MX8MN SoC - Platform driver for NXP i.MX8MQ SoC Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> * tag 'icc-5.8-rc1' of https://git.linaro.org/people/georgi.djakov/linux: interconnect: Remove unused module exit code from core interconnect: Disallow interconnect core to be built as a module interconnect: Add of_icc_get_by_index() helper function interconnect: Add helpers for enabling/disabling a path interconnect: imx: Fix return value check in imx_icc_node_init_qos() interconnect: imx: Add platform driver for imx8mn interconnect: imx: Add platform driver for imx8mq interconnect: imx: Add platform driver for imx8mm interconnect: Add imx core driver dt-bindings: interconnect: Add bindings for imx8m noc interconnect: Add devm_of_icc_get() as exported API for users
2020-05-15Merge branch 'icc-get-by-index' into icc-nextGeorgi Djakov2-25/+56
This is an immutable branch shared with the OPP tree. It contains also the patches to convert the interconnect framework from tristate to bool after Greg agreed with that. This will make the integration between the OPP layer and interconnect much easier. * icc-get-by-index: interconnect: Add of_icc_get_by_index() helper function interconnect: Disallow interconnect core to be built as a module interconnect: Remove unused module exit code from core Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-05-15interconnect: Remove unused module exit code from coreJordan Crouse1-6/+1
The interconnect core is currently always built in: menuconfig INTERCONNECT bool "On-Chip Interconnect management support" So remove the module_exit function and symbolically rename module_init to device_initcall to drive home the point. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/1572546532-19248-3-git-send-email-jcrouse@codeaurora.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-05-15interconnect: Disallow interconnect core to be built as a moduleViresh Kumar1-1/+1
Building individual drivers as modules is fine but allowing a core framework to be built as a module makes it really complex and should be avoided. Whatever uses the interconnect core APIs must also be built as a module if interconnect core is built as module, else we will see compilation failures. If another core framework (like cpufreq, clk, etc), that can't be built as module, needs to use interconnect APIs then we will start seeing compilation failures with allmodconfig configurations as the symbols (like of_icc_get()) used in other frameworks will not be available in the built-in image. Disallow the interconnect core to be built as a module to avoid all these issues. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/b789cce388dd1f2906492f307dea6780c398bc6a.1567065991.git.viresh.kumar@linaro.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-05-13interconnect: Add of_icc_get_by_index() helper functionGeorgi Djakov1-18/+54
This is the same as the traditional of_icc_get() function, but the difference is that it takes index as an argument, instead of name. Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Sibi Sankar <sibis@codeaurora.org> Link: https://lore.kernel.org/r/20200512125327.1868-4-georgi.djakov@linaro.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-05-10interconnect: Add helpers for enabling/disabling a pathGeorgi Djakov2-1/+40
There is a repeated pattern in multiple drivers where they want to switch the bandwidth between zero and some other value. This is happening often in the suspend/resume callbacks. Let's add helper functions to enable and disable the path, so that callers don't have to take care of remembering the bandwidth values and handle this in the framework instead. With this patch the users can call icc_disable() and icc_enable() to lower their bandwidth request to zero and then restore it back to it's previous value. Suggested-by: Evan Green <evgreen@chromium.org> Suggested-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Link: https://lore.kernel.org/r/20200507120846.8354-1-georgi.djakov@linaro.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-05-10interconnect: imx: Fix return value check in imx_icc_node_init_qos()Wei Yongjun1-4/+4
In case of error, the function of_parse_phandle() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. Fixes: f0d8048525d7 ("interconnect: Add imx core driver") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Link: https://lore.kernel.org/r/20200509030214.14435-1-weiyongjun1@huawei.com Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-04-29interconnect: qcom: Move the static keyword to the front of declarationChenTao2-10/+10
Fix the following warning: Move the static keyword to the front of declaration of sdm845_icc_osm_l3 sdm845_aggre1_noc sc7180_icc_osm_l3 sdm845_aggre2_noc sdm845_config_noc sdm845_dc_noc sdm845_gladiator_noc sdm845_mem_noc sdm845_mmss_noc and sdm845_system_noc, resolve the following compiler warning that can be when building with warnings enabled (W=1): drivers/interconnect/qcom/osm-l3.c:81:1: warning: const static struct qcom_icc_desc sdm845_icc_osm_l3 = { drivers/interconnect/qcom/osm-l3.c:94:1: warning: const static struct qcom_icc_desc sc7180_icc_osm_l3 = { drivers/interconnect/qcom/sdm845.c:195:1: warning: const static struct qcom_icc_desc sdm845_aggre1_noc = { drivers/interconnect/qcom/sdm845.c:223:1: warning: const static struct qcom_icc_desc sdm845_aggre2_noc = { drivers/interconnect/qcom/sdm845.c:284:1: warning: const static struct qcom_icc_desc sdm845_config_noc = { drivers/interconnect/qcom/sdm845.c:300:1: warning: const static struct qcom_icc_desc sdm845_dc_noc = { drivers/interconnect/qcom/sdm845.c:318:1: warning: const static struct qcom_icc_desc sdm845_gladiator_noc = { drivers/interconnect/qcom/sdm845.c:353:1: warning: const static struct qcom_icc_desc sdm845_mem_noc = { drivers/interconnect/qcom/sdm845.c:387:1: warning: const static struct qcom_icc_desc sdm845_mmss_noc = { drivers/interconnect/qcom/sdm845.c:433:1: warning: const static struct qcom_icc_desc sdm845_system_noc = { Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: ChenTao <chentao107@huawei.com> Link: https://lore.kernel.org/r/20200423132142.45174-1-chentao107@huawei.com Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Link: https://lore.kernel.org/r/20200429101904.5771-2-georgi.djakov@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-28interconnect: imx: Add platform driver for imx8mnLeonard Crestez3-0/+100
Add a platform driver for the i.MX8MN SoC describing bus topology, based on internal documentation. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Link: https://lore.kernel.org/r/338a5409ce88811ba6c940ba06441db3faa8c187.1586174566.git.leonard.crestez@nxp.com Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-04-28interconnect: imx: Add platform driver for imx8mqLeonard Crestez3-0/+109
Add a platform driver for the i.MX8MQ SoC describing bus topology, based on internal documentation. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Tested-by: Martin Kepplinger <martin.kepplinger@puri.sm> Link: https://lore.kernel.org/r/864310d1f2599c3bd621e70b77028a6e89f6410e.1586174566.git.leonard.crestez@nxp.com Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-04-28interconnect: imx: Add platform driver for imx8mmLeonard Crestez3-0/+111
Add a platform driver for the i.MX8MM SoC describing bus topology. Bandwidth adjustments is currently only supported on the DDRC and main NOC. Scaling for the vpu/gpu/display NICs could be added in the future. Signed-off-by: Alexandre Bailon <abailon@baylibre.com> Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Link: https://lore.kernel.org/r/b14eef179dbd837a486619724b8033490f49db72.1586174566.git.leonard.crestez@nxp.com Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-04-28interconnect: Add imx core driverLeonard Crestez6-0/+355
This adds support for i.MX SoC family to interconnect framework. Platform drivers can describe the interconnect graph and several adjustment knobs where icc node bandwidth is converted to a DEV_PM_QOS_MIN_FREQUENCY request. The interconnect provider is probed through the main NOC device and other adjustable nodes on the same graph are found from a fsl,scalable-nodes phandle array property. Signed-off-by: Alexandre Bailon <abailon@baylibre.com> Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Tested-by: Martin Kepplinger <martin.kepplinger@puri.sm> Link: https://lore.kernel.org/r/35920e673df6c04cbbb7d877a7d4ba25fd91a784.1586174566.git.leonard.crestez@nxp.com Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-04-27interconnect: Add devm_of_icc_get() as exported API for usersAkash Asthana1-0/+25
Users can use devm version of of_icc_get() to benefit from automatic resource release. Signed-off-by: Akash Asthana <akashast@codeaurora.org> Reviewed by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/1586946198-13912-2-git-send-email-akashast@codeaurora.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-04-23interconnect: qcom: Fix uninitialized tcs_cmd::waitMike Tipton1-2/+3
Currently, if tcs_cmd_gen is called with commit=false, then tcs_cmd::wait is left uninitialized. Since the tcs_cmd structures passed to this function aren't zero-initialized, then we're left with random wait values. This results in waiting for completion for more commands than is necessary, depending on what's on the stack at the time. Removing the unnecessary if-condition fixes this, but add an explicit memset of the tcs_cmd structure as well to ensure predictable behavior if more tcs_cmd members are added in the future. Fixes: 976daac4a1c5 ("interconnect: qcom: Consolidate interconnect RPMh support") Signed-off-by: Mike Tipton <mdtipton@codeaurora.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20200319231021.18108-1-mdtipton@codeaurora.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Link: https://lore.kernel.org/r/20200415130327.23059-2-georgi.djakov@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-20Merge tag 'icc-5.7-rc1' of https://git.linaro.org/people/georgi.djakov/linux ↵Greg Kroah-Hartman11-688/+2302
into char-misc-next Georgi writes: interconnect changes for 5.7 Here is a pull request with interconnect changes for the 5.7-rc1 merge window. It contains just driver updates, and these are: - Refactoring of the SDM845 driver, which is now improved to better represent the hardware. - New driver for SC7180 platforms. - New driver for OSM L3 interconnect hardware found on SDM845/SC7180 platforms. Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> * tag 'icc-5.7-rc1' of https://git.linaro.org/people/georgi.djakov/linux: interconnect: qcom: Add OSM L3 support on SC7180 dt-bindings: interconnect: Add OSM L3 DT binding on SC7180 interconnect: qcom: Add OSM L3 interconnect provider support dt-bindings: interconnect: Add OSM L3 DT bindings interconnect: qcom: Allow icc node to be used across icc providers interconnect: qcom: Add SC7180 interconnect provider driver dt-bindings: interconnect: Add Qualcomm SC7180 DT bindings interconnect: qcom: sdm845: Split qnodes into their respective NoCs interconnect: qcom: Consolidate interconnect RPMh support dt-bindings: interconnect: Update Qualcomm SDM845 DT bindings dt-bindings: interconnect: Add YAML schemas for QCOM bcm-voter dt-bindings: interconnect: Convert qcom,sdm845 to DT schema
2020-03-03interconnect: qcom: Add OSM L3 support on SC7180Sibi Sankar2-0/+17
Add Operating State Manager (OSM) L3 interconnect provider support on SC7180 SoCs. Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Reviewed-by: Evan Green <evgreen@chromium.org> Link: https://lore.kernel.org/r/20200227105632.15041-6-sibis@codeaurora.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-03-03interconnect: qcom: Add OSM L3 interconnect provider supportSibi Sankar4-0/+272
On some Qualcomm SoCs, Operating State Manager (OSM) controls the resources of scaling L3 caches. Add a driver to handle bandwidth requests to OSM L3 from CPU on SDM845 SoCs. Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Reviewed-by: Evan Green <evgreen@chromium.org> Link: https://lore.kernel.org/r/20200227105632.15041-4-sibis@codeaurora.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-03-03interconnect: qcom: Allow icc node to be used across icc providersSibi Sankar2-133/+141
Move the icc node ids to a common header, this will allow for referencing/linking of icc nodes to multiple icc providers on SDM845 SoCs. Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Reviewed-by: Evan Green <evgreen@chromium.org> Link: https://lore.kernel.org/r/20200227105632.15041-2-sibis@codeaurora.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-03-03interconnect: qcom: Add SC7180 interconnect provider driverOdelu Kukatla4-0/+802
Add driver for the Qualcomm interconnect buses found in SC7180 based platforms. The topology consists of several NoCs that are controlled by a remote processor that collects the aggregated bandwidth for each master-slave pairs. Signed-off-by: Odelu Kukatla <okukatla@codeaurora.org> Link: https://lore.kernel.org/r/1583241493-21212-3-git-send-email-okukatla@codeaurora.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-03-03interconnect: Handle memory allocation errorsGeorgi Djakov1-0/+9
When we allocate memory, kasprintf() can fail and we must check its return value. Fixes: 05309830e1f8 ("interconnect: Add a name to struct icc_path") Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Link: https://lore.kernel.org/r/20200226110420.5357-2-georgi.djakov@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-28interconnect: qcom: sdm845: Split qnodes into their respective NoCsDavid Dai1-687/+498
In order to better represent the hardware and its different Network-On-Chip devices, split the sdm845 provider driver into NoC specific providers. Remove duplicate functionality already provided by the icc rpmh and bcm voter drivers to calculate and commit bandwidth requests to hardware. Signed-off-by: David Dai <daidavid1@codeaurora.org> Signed-off-by: Odelu Kukatla <okukatla@codeaurora.org> Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Reviewed-by: Evan Green <evgreen@chromium.org> Link: https://lore.kernel.org/r/20200209183411.17195-6-sibis@codeaurora.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-02-28interconnect: qcom: Consolidate interconnect RPMh supportDavid Dai6-0/+704
Add bcm voter driver and add support for RPMh specific interconnect providers which implements the set and aggregate functionalities that translates bandwidth requests into RPMh messages. These modules provide a common set of functionalities for all Qualcomm RPMh based interconnect providers and should help reduce code duplication when adding new providers. Signed-off-by: David Dai <daidavid1@codeaurora.org> Signed-off-by: Odelu Kukatla <okukatla@codeaurora.org> Reviewed-by: Evan Green <evgreen@chromium.org> Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Link: https://lore.kernel.org/r/20200228095951.15457-1-sibis@codeaurora.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-01-07interconnect: qcom: Add MSM8916 interconnect provider driverGeorgi Djakov3-0/+565
Add driver for the Qualcomm interconnect buses found in MSM8916 based platforms. The topology consists of three NoCs that are controlled by a remote processor that collects the aggregated bandwidth for each master-slave pairs. Reviewed-by: Evan Green <evgreen@chromium.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-01-07interconnect: Check for valid path in icc_set_bw()Georgi Djakov1-1/+4
Use IS_ERR() to ensure that the path passed to icc_set_bw() is valid. Reviewed-by: Evan Green <evgreen@chromium.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2020-01-06interconnect: Print the tag in the debugfs summaryGeorgi Djakov1-5/+5
Now we can have a tag associated with the path. Add this information to the interconnect_summary file, as the current information in debugfs is incomplete. Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-17 19:41:17 +0300