summaryrefslogtreecommitdiff
path: root/drivers/input
AgeCommit message (Collapse)AuthorFilesLines
2020-11-17Merge branch 'for-linus' of ↵Linus Torvalds8-18/+55
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: "A fix for use-after-free in the Sun keyboard driver, a fix to firmware updates on newer ICs in the Elan touchpad diver, and a couple misc driver fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: elan_i2c - fix firmware update on newer ICs Input: resistive-adc-touch - fix kconfig dependency on IIO_BUFFER Input: sunkbd - avoid use-after-free in teardown paths Input: i8042 - allow insmod to succeed on devices without an i8042 controller Input: adxl34x - clean up a data type in adxl34x_probe()
2020-11-12Input: elan_i2c - fix firmware update on newer ICsjingle.wu4-8/+9
The argument to iap page type command depends on the firmware page size. Fixes: bfd9b92bc8f9 ("Input: elan_i2c - handle firmware updated on newer ICs") Signed-off-by: Jingle Wu <jingle.wu@emc.com.tw> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-11-12Input: resistive-adc-touch - fix kconfig dependency on IIO_BUFFERNecip Fazil Yildiran1-0/+1
When TOUCHSCREEN_ADC is enabled and IIO_BUFFER is disabled, it results in the following Kbuild warning: WARNING: unmet direct dependencies detected for IIO_BUFFER_CB Depends on [n]: IIO [=y] && IIO_BUFFER [=n] Selected by [y]: - TOUCHSCREEN_ADC [=y] && !UML && INPUT [=y] && INPUT_TOUCHSCREEN [=y] && IIO [=y] The reason is that TOUCHSCREEN_ADC selects IIO_BUFFER_CB without depending on or selecting IIO_BUFFER while IIO_BUFFER_CB depends on IIO_BUFFER. This can also fail building the kernel. Honor the kconfig dependency to remove unmet direct dependency warnings and avoid any potential build failures. Fixes: aa132ffb6b0a ("input: touchscreen: resistive-adc-touch: add generic resistive ADC touchscreen") Signed-off-by: Necip Fazil Yildiran <fazilyildiran@gmail.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/20201102221504.541279-1-fazilyildiran@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-11-09Input: sunkbd - avoid use-after-free in teardown pathsDmitry Torokhov1-8/+33
We need to make sure we cancel the reinit work before we tear down the driver structures. Reported-by: Bodong Zhao <nopitydays@gmail.com> Tested-by: Bodong Zhao <nopitydays@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-10-27Input: i8042 - allow insmod to succeed on devices without an i8042 controllerHans de Goede1-1/+11
The i8042 module exports several symbols which may be used by other modules. Before this commit it would refuse to load (when built as a module itself) on systems without an i8042 controller. This is a problem specifically for the asus-nb-wmi module. Many Asus laptops support the Asus WMI interface. Some of them have an i8042 controller and need to use i8042_install_filter() to filter some kbd events. Other models do not have an i8042 controller (e.g. they use an USB attached kbd). Before this commit the asus-nb-wmi driver could not be loaded on Asus models without an i8042 controller, when the i8042 code was built as a module (as Arch Linux does) because the module_init function of the i8042 module would fail with -ENODEV and thus the i8042_install_filter symbol could not be loaded. This commit fixes this by exiting from module_init with a return code of 0 if no controller is found. It also adds a i8042_present bool to make the module_exit function a no-op in this case and also adds a check for i8042_present to the exported i8042_command function. The latter i8042_present check should not really be necessary because when builtin that function can already be used on systems without an i8042 controller, but better safe then sorry. Reported-and-tested-by: Marius Iacob <themariusus@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20201008112628.3979-2-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-10-27Input: adxl34x - clean up a data type in adxl34x_probe()Dan Carpenter1-1/+1
The "revid" is used to store negative error codes so it should be an int type. Fixes: e27c729219ad ("Input: add driver for ADXL345/346 Digital Accelerometers") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Michael Hennerich <michael.hennerich@analog.com> Link: https://lore.kernel.org/r/20201026072824.GA1620546@mwanda Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-10-25Merge branch 'parisc-5.10-2' of ↵Linus Torvalds2-7/+22
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull more parisc updates from Helge Deller: - During this merge window O_NONBLOCK was changed to become 000200000, but we missed that the syscalls timerfd_create(), signalfd4(), eventfd2(), pipe2(), inotify_init1() and userfaultfd() do a strict bit-wise check of the flags parameter. To provide backward compatibility with existing userspace we introduce parisc specific wrappers for those syscalls which filter out the old O_NONBLOCK value and replaces it with the new one. - Prevent HIL bus driver to get stuck when keyboard or mouse isn't attached - Improve error return codes when setting rtc time - Minor documentation fix in pata_ns87415.c * 'parisc-5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: ata: pata_ns87415.c: Document support on parisc with superio chip parisc: Add wrapper syscalls to fix O_NONBLOCK flag usage hil/parisc: Disable HIL driver when it gets stuck parisc: Improve error return codes when setting rtc time
2020-10-24Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds1-2/+35
Pull ARM SoC platform updates from Olof Johansson: "SoC changes, a substantial part of this is cleanup of some of the older platforms that used to have a bunch of board files. In particular: - Remove non-DT i.MX platforms that haven't seen activity in years, it's time to remove them. - A bunch of cleanup and removal of platform data for TI/OMAP platforms, moving over to genpd for power/reset control (yay!) - Major cleanup of Samsung S3C24xx and S3C64xx platforms, moving them closer to multiplatform support (not quite there yet, but getting close). There are a few other changes too, smaller fixlets, etc. For new platform support, the primary ones are: - New SoC: Hisilicon SD5203, ARM926EJ-S platform. - Cpufreq support for i.MX7ULP" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (121 commits) ARM: mstar: Select MStar intc ARM: stm32: Replace HTTP links with HTTPS ones ARM: debug: add UART early console support for SD5203 ARM: hisi: add support for SD5203 SoC ARM: omap3: enable off mode automatically clk: imx: imx35: Remove mx35_clocks_init() clk: imx: imx31: Remove mx31_clocks_init() clk: imx: imx27: Remove mx27_clocks_init() ARM: imx: Remove unused definitions ARM: imx35: Retrieve the IIM base address from devicetree ARM: imx3: Retrieve the AVIC base address from devicetree ARM: imx3: Retrieve the CCM base address from devicetree ARM: imx31: Retrieve the IIM base address from devicetree ARM: imx27: Retrieve the CCM base address from devicetree ARM: imx27: Retrieve the SYSCTRL base address from devicetree ARM: s3c64xx: bring back notes from removed debug-macro.S ARM: s3c24xx: fix Wunused-variable warning on !MMU ARM: samsung: fix PM debug build with DEBUG_LL but !MMU MAINTAINERS: mark linux-samsung-soc list non-moderated ARM: imx: Remove remnant board file support pieces ...
2020-10-24Merge branch 'for-linus' of ↵Linus Torvalds25-160/+1337
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: - a new driver for ADC driven joysticks - a new Zintix touchscreen driver - enhancements to Intel SoC button array driver - support for F3A "function" in Synaptics RMI4 driver - assorted driver fixups * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (29 commits) Input: Add MAINTAINERS entry for SiS i2c touch input driver Input: evdev - per-client waitgroups Input: synaptics - enable InterTouch for ThinkPad T14 Gen 1 Input: synaptics - enable InterTouch for ThinkPad P1/X1E gen 2 Input: synaptics-rmi4 - support bootloader v8 in f34v7 Input: synaptics-rmi4 - add support for F3A Input: synaptics-rmi4 - rename f30_data to gpio_data Input: add zinitix touchscreen driver dt-bindings: input/touchscreen: add bindings for zinitix Input: joystick - add ADC attached joystick driver. dt-bindings: input: Add docs for ADC driven joystick Input: sun4i-ps2 - fix handling of platform_get_irq() error Input: twl4030_keypad - fix handling of platform_get_irq() error Input: omap4-keypad - fix handling of platform_get_irq() error Input: ep93xx_keypad - fix handling of platform_get_irq() error Input: stmfts - fix a & vs && typo Input: imx6ul_tsc - unify open/close and PM paths Input: imx6ul_tsc - clean up some errors in imx6ul_tsc_resume() Input: elants_i2c - fix typo for an attribute to show calibration count Input: elants_i2c - report resolution of ABS_MT_TOUCH_MAJOR by FW information. ...
2020-10-23Merge tag 'tag-chrome-platform-for-v5.10' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux Pull chrome platform updates from Benson Leung: "cros-ec: - Error code cleanup across cros-ec by Guenter - Remove cros_ec_cmd_xfer in favor of cros_ec_cmd_xfer_status cros_ec_typec: - Landed initial USB4 support in typec connector class driver for cros_ec - Role switch bugfix on disconnect, and reordering configuration steps cros_ec_lightbar: - Fix buffer outsize and result for get_lightbar_version misc: - Remove config MFD_CROS_EC, now that transition from MFD is complete - Enable KEY_LEFTMETA in new location on arm based cros-ec-keyboard keymap" * tag 'tag-chrome-platform-for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux: ARM: dts: cros-ec-keyboard: Add alternate keymap for KEY_LEFTMETA platform/chrome: Use kobj_to_dev() instead of container_of() platform/chrome: cros_ec_proto: Drop cros_ec_cmd_xfer() platform/chrome: cros_ec_proto: Update cros_ec_cmd_xfer() call-sites platform/chrome: Kconfig: Remove the transitional MFD_CROS_EC config platform/chrome: cros_ec_lightbar: Reduce ligthbar get version command platform/chrome: cros_ec_trace: Add fields to command traces platform/chrome: cros_ec_typec: Re-order connector configuration steps platform/chrome: cros_ec_typec: Avoid setting usb role twice during disconnect platform/chrome: cros_ec_typec: Send enum values to usb_role_switch_set_role() platform/chrome: cros_ec_typec: USB4 support pwm: cros-ec: Simplify EC error handling platform/chrome: cros_ec_proto: Convert EC error codes to Linux error codes platform/input: cros_ec: Replace -ENOTSUPP with -ENOPROTOOPT pwm: cros-ec: Accept more error codes from cros_ec_cmd_xfer_status platform/chrome: cros_ec_sysfs: Report range of error codes from EC cros_ec_lightbar: Accept more error codes from cros_ec_cmd_xfer_status iio: cros_ec: Accept -EOPNOTSUPP as 'not supported' error code
2020-10-22hil/parisc: Disable HIL driver when it gets stuckHelge Deller2-7/+22
When starting a HP machine with HIL driver but without an HIL keyboard or HIL mouse attached, it may happen that data written to the HIL loop gets stuck (e.g. because the transaction queue is full). Usually one will then have to reboot the machine because all you see is and endless output of: Transaction add failed: transaction already queued? In the higher layers hp_sdc_enqueue_transaction() is called to queued up a HIL packet. This function returns an error code, and this patch adds the necessary checks for this return code and disables the HIL driver if further packets can't be sent. Tested on a HP 730 and a HP 715/64 machine. Signed-off-by: Helge Deller <deller@gmx.de> Cc: <stable@vger.kernel.org>
2020-10-19Merge branch 'next' into for-linusDmitry Torokhov25-160/+1337
Prepare input updates for 5.10 merge window.
2020-10-14Merge tag 'hyperv-next-signed' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull Hyper-V updates from Wei Liu: - a series from Boqun Feng to support page size larger than 4K - a few miscellaneous clean-ups * tag 'hyperv-next-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: hv: clocksource: Add notrace attribute to read_hv_sched_clock_*() functions x86/hyperv: Remove aliases with X64 in their name PCI: hv: Document missing hv_pci_protocol_negotiation() parameter scsi: storvsc: Support PAGE_SIZE larger than 4K Driver: hv: util: Use VMBUS_RING_SIZE() for ringbuffer sizes HID: hyperv: Use VMBUS_RING_SIZE() for ringbuffer sizes Input: hyperv-keyboard: Use VMBUS_RING_SIZE() for ringbuffer sizes hv_netvsc: Use HV_HYP_PAGE_SIZE for Hyper-V communication hv: hyperv.h: Introduce some hvpfn helper functions Drivers: hv: vmbus: Move virt_to_hvpfn() to hyperv header Drivers: hv: Use HV_HYP_PAGE in hv_synic_enable_regs() Drivers: hv: vmbus: Introduce types of GPADL Drivers: hv: vmbus: Move __vmbus_open() Drivers: hv: vmbus: Always use HV_HYP_PAGE_SIZE for gpadl drivers: hv: remove cast from hyperv_die_event
2020-10-07Input: evdev - per-client waitgroupsKenny Levinsen1-10/+9
All evdev clients share a common waitgroup. On new input events, all clients waiting on this waitgroup are woken up, even those filtering out the events, possibly more than once per event. This leads to duplicated and unwanted wakeups. Split the shared waitgroup into per-client waitgroups for more fine-grained wakeups. Signed-off-by: Kenny Levinsen <kl@kl.wtf> Link: https://lore.kernel.org/r/20200429184126.2155-1-kl@kl.wtf Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-10-05Input: synaptics - enable InterTouch for ThinkPad T14 Gen 1Hans de Goede1-0/+1
With the new RMI4 F3A support, we're now able to enable full RMI4 support for this model. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20201005114919.371592-1-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-10-05Input: synaptics - enable InterTouch for ThinkPad P1/X1E gen 2Jason A. Donenfeld1-1/+2
With the new RMI4 F3A support, we're now able to enable full RMI4 support for this model. We also tidy up the comments a bit, as the X1E is essentially the same computer as the P1. Acked-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Link: https://lore.kernel.org/r/20200930225046.173190-3-Jason@zx2c4.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-10-05Input: synaptics-rmi4 - support bootloader v8 in f34v7Jason A. Donenfeld1-2/+7
With the recent addition of the F3A support, we can now accept bootloader v8, which will help support recent Thinkpads. Acked-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Link: https://lore.kernel.org/r/20200930225046.173190-2-Jason@zx2c4.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-10-05Input: synaptics-rmi4 - add support for F3AVincent Huang5-0/+254
RMI4 F3A supports the touchpad GPIO function, it's designed to support more GPIOs and used on newer touchpads. This patch adds support of the touchpad buttons. Signed-off-by: Vincent Huang <vincent.huang@tw.synaptics.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andrew Duggan <aduggan@synaptics.com> Link: https://lore.kernel.org/r/20200930094147.635556-3-vincent.huang@tw.synaptics.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-10-05Input: synaptics-rmi4 - rename f30_data to gpio_dataVincent Huang2-8/+8
f30_data in rmi_device_platform_data could be also referenced by RMI function 3A, so rename it and the structure name to avoid confusion. Signed-off-by: Vincent Huang <vincent.huang@tw.synaptics.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andrew Duggan <aduggan@synaptics.com> Link: https://lore.kernel.org/r/20200930094147.635556-2-vincent.huang@tw.synaptics.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-10-05Input: add zinitix touchscreen driverMichael Srba3-0/+594
Add support for the bt541 touchscreen IC from zinitix, loosely based on downstream driver. The driver currently supports multitouch (5 touch points). The bt541 seems to support touch keys, but the support was not added because that functionality is not being utilized by the touchscreen used for testing. Based on the similartities between downstream drivers, it seems likely that other similar touchscreen ICs can be supported with this driver in the future. Signed-off-by: Michael Srba <Michael.Srba@seznam.cz> Link: https://lore.kernel.org/r/20201001122949.16846-1-michael.srba@seznam.cz Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-10-03Merge branch 'for-linus' of ↵Linus Torvalds2-0/+9
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: "A couple more driver quirks, now enabling newer trackpoints from Synaptics for real" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: i8042 - add nopnp quirk for Acer Aspire 5 A515 Input: trackpoint - enable Synaptics trackpoints
2020-09-29Input: joystick - add ADC attached joystick driver.Artur Rojek3-0/+275
Add a driver for joystick devices connected to ADC controllers supporting the Industrial I/O subsystem. Signed-off-by: Artur Rojek <contact@artur-rojek.eu> Tested-by: Paul Cercueil <paul@crapouillou.net> Tested-by: Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/20200927123302.31062-2-contact@artur-rojek.eu Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-09-29Input: i8042 - add nopnp quirk for Acer Aspire 5 A515Jiri Kosina1-0/+7
Touchpad on this laptop is not detected properly during boot, as PNP enumerates (wrongly) AUX port as disabled on this machine. Fix that by adding this board (with admittedly quite funny DMI identifiers) to nopnp quirk list. Reported-by: Andrés Barrantes Silman <andresbs2000@protonmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Link: https://lore.kernel.org/r/nycvar.YFH.7.76.2009252337340.3336@cbobk.fhfr.pm Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-09-29Input: trackpoint - enable Synaptics trackpointsVincent Huang1-0/+2
Add Synaptics IDs in trackpoint_start_protocol() to mark them as valid. Signed-off-by: Vincent Huang <vincent.huang@tw.synaptics.com> Fixes: 6c77545af100 ("Input: trackpoint - add new trackpoint variant IDs") Reviewed-by: Harry Cutts <hcutts@chromium.org> Tested-by: Harry Cutts <hcutts@chromium.org> Link: https://lore.kernel.org/r/20200924053013.1056953-1-vincent.huang@tw.synaptics.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-09-28Input: hyperv-keyboard: Use VMBUS_RING_SIZE() for ringbuffer sizesBoqun Feng1-2/+2
For a Hyper-V vmbus, the size of the ringbuffer has two requirements: 1) it has to take one PAGE_SIZE for the header 2) it has to be PAGE_SIZE aligned so that double-mapping can work VMBUS_RING_SIZE() could calculate a correct ringbuffer size which fulfills both requirements, therefore use it to make sure vmbus work when PAGE_SIZE != HV_HYP_PAGE_SIZE (4K). Note that since the argument for VMBUS_RING_SIZE() is the size of payload (data part), so it will be minus 4k (the size of header when PAGE_SIZE = 4k) than the original value to keep the ringbuffer total size unchanged when PAGE_SIZE = 4k. Signed-off-by: Boqun Feng <boqun.feng@gmail.com> Cc: Michael Kelley <mikelley@microsoft.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/20200916034817.30282-9-boqun.feng@gmail.com Signed-off-by: Wei Liu <wei.liu@kernel.org>
2020-09-20Merge branch 'for-linus' of ↵Linus Torvalds3-8/+28
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: "Just a couple of driver quirks" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: trackpoint - add new trackpoint variant IDs Input: i8042 - add Entroware Proteus EL07R4 to nomux and reset lists
2020-09-16Input: sun4i-ps2 - fix handling of platform_get_irq() errorKrzysztof Kozlowski1-6/+3
platform_get_irq() returns -ERRNO on error. In such case comparison to 0 would pass the check. Fixes: e443631d20f5 ("Input: serio - add support for Alwinner A10/A20 PS/2 controller") Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Chen-Yu Tsai <wens@csie.org> Link: https://lore.kernel.org/r/20200828145744.3636-4-krzk@kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-09-16Input: twl4030_keypad - fix handling of platform_get_irq() errorKrzysztof Kozlowski1-5/+3
platform_get_irq() returns -ERRNO on error. In such case casting to unsigned and comparing to 0 would pass the check. Fixes: 7abf38d6d13c ("Input: twl4030-keypad - add device tree support") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200828145744.3636-3-krzk@kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-09-16Input: omap4-keypad - fix handling of platform_get_irq() errorKrzysztof Kozlowski1-4/+2
platform_get_irq() returns -ERRNO on error. In such case comparison to 0 would pass the check. Fixes: f3a1ba60dbdb ("Input: omap4-keypad - use platform device helpers") Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200828145744.3636-2-krzk@kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-09-16Input: ep93xx_keypad - fix handling of platform_get_irq() errorKrzysztof Kozlowski1-2/+2
platform_get_irq() returns -ERRNO on error. In such case comparison to 0 would pass the check. Fixes: 60214f058f44 ("Input: ep93xx_keypad - update driver to new core support") Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200828145744.3636-1-krzk@kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-09-16Input: stmfts - fix a & vs && typoYueHaibing1-1/+1
In stmfts_sysfs_hover_enable_write(), we should check value and sdata->hover_enabled is all true. Fixes: 78bcac7b2ae1 ("Input: add support for the STMicroelectronics FingerTip touchscreen") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20200916141941.16684-1-yuehaibing@huawei.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-09-16Input: imx6ul_tsc - unify open/close and PM pathsDmitry Torokhov1-30/+22
Open/close and resume/suspend paths are very similar, let's factor out common parts. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-09-16Input: imx6ul_tsc - clean up some errors in imx6ul_tsc_resume()Dan Carpenter1-11/+16
If imx6ul_tsc_init() fails then we need to clean up the clocks. I reversed the "if (input_dev->users) {" condition to make the code a bit simpler. Fixes: 6cc527b05847 ("Input: imx6ul_tsc - propagate the errors") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20200905124942.GC183976@mwanda Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-09-16Input: elants_i2c - fix typo for an attribute to show calibration countJohnny Chuang1-1/+1
Fixed typo for command from 0xE0 to 0xD0. Fixes: cf520c643012 ("Input: elants_i2c - provide an attribute to show calibration count") Signed-off-by: Johnny Chuang <johnny.chuang.emc@gmail.com> Link: https://lore.kernel.org/r/1600238783-32303-1-git-send-email-johnny.chuang.emc@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-09-14Input: trackpoint - add new trackpoint variant IDsVincent Huang2-8/+12
Add trackpoint variant IDs to allow supported control on Synaptics trackpoints. Signed-off-by: Vincent Huang <vincent.huang@tw.synaptics.com> Link: https://lore.kernel.org/r/20200914120327.2592-1-vincent.huang@tw.synaptics.com Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-09-14Input: elants_i2c - report resolution of ABS_MT_TOUCH_MAJOR by FW information.Johnny Chuang1-0/+6
This patch adds a new behavior to report touch major resolution based on information provided by firmware. In initial process, driver acquires touch information from touch ic. It contains one byte about the resolution value of ABS_MT_TOUCH_MAJOR. Touch driver will report touch major resolution by this information. Signed-off-by: Johnny Chuang <johnny.chuang.emc@gmail.com> Reviewed-by: Harry Cutts <hcutts@chromium.org> Link: https://lore.kernel.org/r/1598581195-9874-1-git-send-email-johnny.chuang.emc@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-09-14Input: raydium_i2c_ts - use single i2c_transfer transaction when using ↵Furquan Shaikh1-73/+58
RM_CMD_BANK_SWITCH On an AMD chromebook, where the same I2C bus is shared by both Raydium touchscreen and a trackpad device, it is observed that interleaving of I2C messages when `raydium_i2c_read_message()` is called leads to the Raydium touch IC reporting incorrect information. This is the sequence that was observed to result in the above issue: * I2C write to Raydium device for RM_CMD_BANK_SWITCH * I2C write to trackpad device * I2C read from trackpad device * I2C write to Raydium device for setting address * I2C read from Raydium device >>>> This provides incorrect information This change adds a new helper function `raydium_i2c_xfer()` that performs I2C transactions to the Raydium device. It uses the register address to decide if RM_CMD_BANK_SWITCH header needs to be sent to the device (i.e. if register address is greater than 255, then bank switch header is sent before the rest of the transaction). Additionally, it ensures that all the I2C operations performed as part of `raydium_i2c_xfer()` are done as a single i2c_transfer. This guarantees that no other transactions are initiated to any other device on the same bus in between. Additionally, `raydium_i2c_{send|read}*` functions are refactored to use this new helper function. Verified with the patch across multiple reboots (>100) that the information reported by the Raydium touchscreen device during probe is correct. Signed-off-by: Furquan Shaikh <furquan@google.com> Link: https://lore.kernel.org/r/20200821024006.3399663-1-furquan@google.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-09-14Input: soc_button_array - work around DSDTs which modify the irqflagsHans de Goede1-9/+60
Some 2-in-1s which use the soc_button_array driver have this ugly issue in their DSDT where the _LID method modifies the irq-type settings of the GPIOs used for the power and home buttons. The intend of this AML code is to disable these buttons when the lid is closed. The AML does this by directly poking the GPIO controllers registers. This is problematic because when re-enabling the irq, which happens whenever _LID gets called with the lid open (e.g. on boot and on resume), it sets the irq-type to IRQ_TYPE_LEVEL_LOW. Where as the gpio-keys driver programs the type to, and expects it to be, IRQ_TYPE_EDGE_BOTH. This commit adds a workaround for this which (on affected devices) does not set gpio_keys_button.gpio on these 2-in-1s, instead it gets the irq for the GPIO, configures it as IRQ_TYPE_LEVEL_LOW (to match how the _LID AML code configures it) and passes the irq in gpio_keys_button.irq. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20200906122016.4628-2-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-09-14Input: soc_button_array - add support for INT33D3 tablet-mode switch devicesHans de Goede1-0/+11
According to the Microsoft documentation for Windows 8 convertible devices, these devices should implement a PNP0C60 "laptop/slate mode state indicator" ACPI device. This device can work in 2 ways, if there is a GPIO which directly indicates the device is in tablet-mode or not then the direct-gpio mode should be used. If there is no such GPIO, but instead the events are coming from e.g. the embedded-controller, then there should still be a PNP0C60 ACPI device and event-injection should be used to send the events. The drivers/platform/x86/intel-vbtn.c code is an example from a standardized manner of doing the latter. On various 2-in-1s with either a detachable keyboard, or with 360° hinges, the direct GPIO mode is indicated by an ACPI device with a HID of INT33D3, which contains a single GpioInt in its ACPI resource table, which directly indicates if the device is in tablet-mode or not. This commit adds support for this to the soc_button_array code, as well as for the alternative ID9001 HID which some devices use instead of the INT33D3 HID. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20200826150601.12137-3-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-09-14Input: soc_button_array - add active_low setting to soc_button_infoHans de Goede1-9/+11
This is a preparation patch for adding support for Intel INT33D3 ACPI devices. These INT33D3 devices follow yet another Intel defined (but not documented) ACPI GPIO button standard. Unlike the ACPI GPIO button devices supported so far, the GPIO used in the INT33D3 devices is active-high, rather then active-low. This commit makes setting the gpio_keys_button.active_low flag configurable through the soc_button_info struct and enables it for all currently supported devices. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20200826150601.12137-2-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-09-13Merge tag 'samsung-soc-s3c-5.10' of ↵Olof Johansson1-2/+35
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/soc Samsung S3C24xx and S3C64xx machine code cleanup for v5.10 Big cleanup for the Samsung S3C24xx and S3C64xx platforms, although it also touches files shared with S5Pv210 and Exynos. This is mostly Arnd Bergmann work which Krzysztof Kozlowski took over, rebased and polished. The goal is to cleanup, merge and finally make the Samsung S3C24xx and S3C64xx architectures multiplatform. The multiplatform did not happen yet here - just cleaning up and merging into one arch/arm/mach-s3c directory. However this is step forward for multiplatform or at least to keep this code still maintainable. This pulls also branch with changes for Samsung SoC sound drivers from broonie/sound because the cleanups there were part of this series and all further patches depend on them. * tag 'samsung-soc-s3c-5.10' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: (62 commits) ARM: s3c: Avoid naming clash of S3C24xx and S3C64xx timer setup ARM: s3c: Cleanup from old plat-samsung include ARM: s3c: make headers local if possible ARM: s3c: move into a common directory ARM: s3c24xx: stop including mach/hardware.h from mach/io.h cpufreq: s3c24xx: move low-level clk reg access into platform code cpufreq: s3c2412: use global s3c2412_cpufreq_setrefresh ARM: s3c: remove cpufreq header dependencies cpufreq: s3c24xx: split out registers fbdev: s3c2410fb: remove mach header dependency ARM: s3c24xx: bast: avoid irq_desc array usage ARM: s3c24xx: spi: avoid hardcoding fiq number in driver ARM: s3c24xx: include mach/irqs.h where needed ARM: s3c24xx: move s3cmci pinctrl handling into board files ARM: s3c24xx: move iis pinctrl config into boards ARM: s3c24xx: move spi fiq handler into platform ARM: s3c: adc: move header to linux/soc/samsung ARM: s3c24xx: move irqchip driver back into platform ARM: s3c24xx: move regs-spi.h into spi driver ARM: s3c64xx: remove mach/hardware.h ... Link: https://lore.kernel.org/r/20200831154751.7551-1-krzk@kernel.org Signed-off-by: Olof Johansson <olof@lixom.net>
2020-09-09Input: i8042 - add Entroware Proteus EL07R4 to nomux and reset listsHans de Goede1-0/+16
The keyboard drops keypresses early during boot unless both the nomux and reset quirks are set. Add DMI table entries for this. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1806085 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20200907095656.13155-1-hdegoede@redhat.com Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-08-25Input: MT - avoid comma separated statementsJoe Perches1-4/+7
Use semicolons and braces. Signed-off-by: Joe Perches <joe@perches.com> Link: https://lore.kernel.org/r/02cb394f8c305473c1a783a5ea8425de79fe0ec1.1598331149.git.joe@perches.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-08-24platform/input: cros_ec: Replace -ENOTSUPP with -ENOPROTOOPTGuenter Roeck1-1/+1
-ENOTSUPP is not a SUSV4 error code and should not be used. Use -ENOPROTOOPT instead to report EC_RES_INVALID_VERSION responses from the EC. This matches match the NFS response for unsupported protocol versions. Cc: Gwendal Grignou <gwendal@chromium.org> Cc: Yu-Hsuan Hsu <yuhsuan@chromium.org> Cc: Prashant Malani <pmalani@chromium.org> Cc: Brian Norris <briannorris@chromium.org> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
2020-08-24treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva5-6/+5
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-08-19ARM: s3c: adc: move header to linux/soc/samsungArnd Bergmann1-2/+35
There are multiple drivers using the private adc interface. It seems unlikely that they would ever get converted to iio, so make the current state official by making the header file global. The s3c2410_ts driver needs a couple of register definitions as well. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Sebastian Reichel <sre@kernel.org> Link: https://lore.kernel.org/r/20200806182059.2431-22-krzk@kernel.org Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2020-08-16Merge tag 'sh-for-5.9' of git://git.libc.org/linux-shLinus Torvalds1-2/+0
Pull arch/sh updates from Rich Felker: "Cleanup, SECCOMP_FILTER support, message printing fixes, and other changes to arch/sh" * tag 'sh-for-5.9' of git://git.libc.org/linux-sh: (34 commits) sh: landisk: Add missing initialization of sh_io_port_base sh: bring syscall_set_return_value in line with other architectures sh: Add SECCOMP_FILTER sh: Rearrange blocks in entry-common.S sh: switch to copy_thread_tls() sh: use the generic dma coherent remap allocator sh: don't allow non-coherent DMA for NOMMU dma-mapping: consolidate the NO_DMA definition in kernel/dma/Kconfig sh: unexport register_trapped_io and match_trapped_io_handler sh: don't include <asm/io_trapped.h> in <asm/io.h> sh: move the ioremap implementation out of line sh: move ioremap_fixed details out of <asm/io.h> sh: remove __KERNEL__ ifdefs from non-UAPI headers sh: sort the selects for SUPERH alphabetically sh: remove -Werror from Makefiles sh: Replace HTTP links with HTTPS ones arch/sh/configs: remove obsolete CONFIG_SOC_CAMERA* sh: stacktrace: Remove stacktrace_ops.stack() sh: machvec: Modernize printing of kernel messages sh: pci: Modernize printing of kernel messages ...
2020-08-15input: i8042 - Remove special Cayman handlingGeert Uytterhoeven1-2/+0
As of commit 37744feebc086908 ("sh: remove sh5 support"), support for the SH5-based Cayman platform can no longer be selected. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Rich Felker <dalias@libc.org>
2020-08-11Merge branch 'for-linus' of ↵Linus Torvalds42-235/+641
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: - an update to Elan touchpad controller driver supporting newer ICs with enhanced precision reports and a new firmware update process - an update to EXC3000 touch controller supporting additional parts - assorted driver fixups * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (27 commits) Input: exc3000 - add support to query model and fw_version Input: exc3000 - add reset gpio support Input: exc3000 - add EXC80H60 and EXC80H84 support dt-bindings: touchscreen: Convert EETI EXC3000 touchscreen to json-schema Input: sentelic - fix error return when fsp_reg_write fails Input: alps - remove redundant assignment to variable ret Input: ims-pcu - return error code rather than -ENOMEM Input: elan_i2c - add ic type 0x15 Input: atmel_mxt_ts - only read messages in mxt_acquire_irq() when necessary Input: uinput - fix typo in function name documentation Input: ati_remote2 - add missing newlines when printing module parameters Input: psmouse - add a newline when printing 'proto' by sysfs Input: synaptics-rmi4 - drop a duplicated word Input: elan_i2c - add support for high resolution reports Input: elan_i2c - do not constantly re-query pattern ID Input: elan_i2c - add firmware update info for ICs 0x11, 0x13, 0x14 Input: elan_i2c - handle firmware updated on newer ICs Input: elan_i2c - add support for different firmware page sizes Input: elan_i2c - fix detecting IAP version on older controllers Input: elan_i2c - handle devices with patterns above 1 ...
2020-08-07Input: exc3000 - add support to query model and fw_versionSebastian Reichel1-1/+147
Expose model and fw_version via sysfs. Also query the model in probe to make sure, that the I2C communication with the device works before successfully probing the driver. This is a bit complicated, since EETI devices do not have a sync interface. Sending the commands and directly reading does not work. Sending the command and waiting for some time is also not an option, since there might be touch events in the mean time. Last but not least we do not cache the results, since this interface can be used to check the I2C communication is still working as expected. Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://lore.kernel.org/r/20200805160520.456570-5-sebastian.reichel@collabora.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-26 11:42:03 +0300