| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
commit ca459e237bc49567649c56bc72e4c602fb92fd67 upstream.
The driver currently trusts the bMasterInterface0 from the CDC union
descriptor without verifying that it matches the interface being
probed. This could lead to the driver overwriting the private data of
another interface.
Validate that the control interface found in the descriptor is indeed
the one we are probing.
Fixes: 628329d52474 ("Input: add IMS Passenger Control Unit driver")
Cc: stable@vger.kernel.org
Reported-by: Sashiko bot <sashiko-bot@kernel.org>
Assisted-by: Gemini:gemini-3.1-pro
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 411b8c4b274737c3bf08e1e025801161603cfffc upstream.
The ims_pcu_reset_device() sysfs callback calls ims_pcu_execute_command()
without acquiring pcu->cmd_mutex. This can lead to data races and
corruption of the shared command buffer if triggered concurrently with
other commands.
Acquire pcu->cmd_mutex before calling ims_pcu_execute_command().
Fixes: 628329d52474 ("Input: add IMS Passenger Control Unit driver")
Cc: stable@vger.kernel.org
Reported-by: Sashiko bot <sashiko-bot@kernel.org>
Assisted-by: Gemini:gemini-3.1-pro
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d4579af29e67ca8722db0a1194227f8015c8981d upstream.
The driver parses CDC union descriptors in ims_pcu_get_cdc_union_desc()
by iterating through the extra descriptor data. However, it does not
verify that the bLength of each descriptor is at least 2. A malicious
device could provide a descriptor with bLength = 0, leading to an
infinite loop in the driver.
Add a check to ensure bLength is at least 2 before proceeding with
parsing.
Fixes: 628329d52474 (Input: add IMS Passenger Control Unit driver)
Cc: stable@vger.kernel.org
Assisted-by: Gemini:gemini-3.1-pro
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 403b0a6970b1084bb27907c0f8225801fdd0fe1d upstream.
The debug logging in ims_pcu_irq() unconditionally prints data from
pcu->urb_in_buf. However, if the interrupt fired for pcu->urb_ctrl, the
actual data resides in pcu->urb_ctrl_buf. If urb->actual_length for the
control URB exceeds pcu->max_in_size, this leads to an out-of-bounds
read.
Fix this by printing from the correct buffer associated with the URB.
Fixes: 628329d52474 ("Input: add IMS Passenger Control Unit driver")
Cc: stable@vger.kernel.org
Reported-by: Sashiko bot <sashiko-bot@kernel.org>
Assisted-by: Gemini:gemini-3.1-pro
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d48795b5cd6828d36b707e8d62fc9e5c90e004ab upstream.
The firmware object was not being released if validation failed.
Use __free(firmware) to ensure the firmware is always released.
Fixes: 628329d52474 ("Input: add IMS Passenger Control Unit driver")
Cc: stable@vger.kernel.org
Reported-by: Sashiko bot <sashiko-bot@kernel.org>
Assisted-by: Gemini:gemini-3.1-pro
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8adf4289d945e8990e4336436a97da71d21d2cae upstream.
In ims_pcu_line_setup(), the driver uses pcu->cmd_buf as a transfer
buffer for usb_control_msg(). However, pcu->cmd_buf is embedded in the
struct ims_pcu allocation, which violates DMA mapping rules regarding
cacheline alignment.
Use a heap-allocated buffer for the line coding data instead.
Fixes: 628329d52474 ("Input: add IMS Passenger Control Unit driver")
Cc: stable@vger.kernel.org
Reported-by: Sashiko bot <sashiko-bot@kernel.org>
Assisted-by: Gemini:gemini-3.1-pro
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 48c9d92fd4ee3a8f5d2cb46c802a0eff8e67c79c upstream.
The driver processes response data from device buffers without verifying
that the device actually sent enough data. This can lead to
out-of-bounds reads or processing stale data.
Add checks for the expected response length before accessing the
buffers.
Fixes: 628329d52474 ("Input: add IMS Passenger Control Unit driver")
Cc: stable@vger.kernel.org
Reported-by: Sashiko bot <sashiko-bot@kernel.org>
Assisted-by: Gemini:gemini-3.1-pro
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit baf56975806534268e24acf9a8abb1c447ce11e9 upstream.
The driver currently assumes that the first endpoint of the control
interface is an interrupt IN endpoint without verifying it. A malicious
device could provide a different endpoint type, which would then be
passed to usb_fill_int_urb(), potentially leading to kernel warnings
or undefined behavior.
Verify that the control endpoint is an interrupt IN endpoint.
Fixes: 628329d52474 ("Input: add IMS Passenger Control Unit driver")
Cc: stable@vger.kernel.org
Reported-by: Sashiko bot <sashiko-bot@kernel.org>
Assisted-by: Gemini:gemini-3.1-pro
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 441c510a649c8ddce38aa0311334ed8bb546b36c upstream.
During probe the driver claims the data interface, but it never releases
it. Release it in disconnect to avoid leaving it permanently claimed.
Fixes: 628329d52474 ("Input: add IMS Passenger Control Unit driver")
Cc: stable@vger.kernel.org
Reported-by: Sashiko bot <sashiko-bot@kernel.org>
Assisted-by: Gemini:gemini-3.1-pro
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 001428ea4d2c371107cb984108e266adf99f1f1e upstream.
When the driver was converted to use the driver core to instantiate device
attributes (via .dev_groups in the usb_driver structure), the attributes
started appearing on all interfaces bound to the driver. Since the ims-pcu
driver manually claims the secondary data interface during probe, the
driver core automatically creates the sysfs attributes for that interface
as well.
However, the driver only supports these attributes on the primary control
interface. Data interfaces lack the necessary descriptors and internal
state to handle these requests, and accessing them can lead to unexpected
behavior or crashes.
Fix this by updating the is_visible() callbacks for both the main and OFN
attribute groups to verify that the interface being accessed is indeed the
control interface.
Fixes: 204d18a7a0c6 ("Input: ims-pcu - use driver core to instantiate device attributes")
Reported-by: Sashiko bot <sashiko-bot@kernel.org>
Assisted-by: Gemini:gemini-3.1-pro
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/ahp23lj4_vXIeUBl@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 462a999917755a3bf77448dfd64307963cf0a9f0 upstream.
ims_pcu_disconnect() only intended to perform cleanup when the primary
(control) interface is unbound. However, it currently relies on the
interface class to distinguish between control and data interfaces.
A malicious device could present a data interface with the same class
as the control interface, leading to premature cleanup and potential
use-after-free or double-free.
Switch to verifying that the interface being disconnected is indeed
the control interface.
Fixes: 628329d52474 ("Input: add IMS Passenger Control Unit driver")
Cc: stable@vger.kernel.org
Reported-by: Sashiko bot <sashiko-bot@kernel.org>
Assisted-by: Gemini:gemini-3.1-pro
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit fe938ee497d58c644f6910cfe6ae155f6fb3e523 upstream.
Set maple driver data before calling input_register_device() to
ensure that it is available if the device is opened immediately and
the callback is triggered.
Cc: stable@vger.kernel.org
Assisted-by: Antigravity:gemini-3.5-flash
Tested-by: Florian Fuchs <fuchsfl@gmail.com>
Link: https://patch.msgid.link/akNYib9hQFNN1fA9@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 738f24bbbc95dd50cb4229d1ed62a05f29db2bda upstream.
Set maple driver data before calling input_register_device() to
ensure that it is available if the device is opened immediately and
the callback is triggered.
Cc: stable@vger.kernel.org
Assisted-by: Antigravity:gemini-3.5-flash
Tested-by: Florian Fuchs <fuchsfl@gmail.com>
Link: https://patch.msgid.link/akNXw45L_8bxD6QV@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 536394ec81419b67d9f4f0028812c4372397be1b upstream.
Set maple driver data before calling input_register_device() to
ensure that it is available if the device is opened immediately and
the callback is triggered.
Cc: stable@vger.kernel.org
Assisted-by: Antigravity:gemini-3.5-flash
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit adea84ee6cdea611146c4251d3c1616f5a09feca upstream.
If the touchscreen controller reports a touch ID of 0, the driver
calculates the slot ID as touch->id - 1, which underflows to UINT_MAX.
This is passed to input_mt_slot() as -1.
Since the input core ignores negative slot values, the active slot remains
unchanged. The driver then reports the touch coordinates for the previously
active slot, corrupting its state.
Fix this by rejecting touch reports with ID 0.
Fixes: 07b8481d4aff ("Input: add MELFAS mms114 touchscreen driver")
Cc: stable@vger.kernel.org
Reported-by: sashiko-bot@kernel.org
Assisted-by: Antigravity:gemini-3.5-flash
Link: https://patch.msgid.link/20260704060115.353049-1-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ee89db004238bd0b034f2a6176e175561658750b upstream.
Commit 555c765b0cc2 ("Input: mouse - drop unnecessary calls to
input_set_drvdata") dropped the input_set_drvdata() call in probe
because the data appeared to be unused. However, dc_mouse_open() and
dc_mouse_close() were using maple_get_drvdata(to_maple_dev(&dev->dev)).
This appears to be accessing the data attached to an instance of
maple_device structure, while in reality this actually retrieves driver
data from the input device's embedded struct device (doing invalid
conversion of input device structure to maple device). After
input_set_drvdata() was removed, that lookup started returning NULL and
opening the input device dereferences mse->mdev.
Restore input_set_drvdata() and convert open() and close() to use
input_get_drvdata() so the dependency is no longer hidden.
Fixes: 6b3480855aad ("maple: input: fix up maple mouse driver")
Fixes: 555c765b0cc2 ("Input: mouse - drop unnecessary calls to input_set_drvdata")
Signed-off-by: Florian Fuchs <fuchsfl@gmail.com>
Link: https://patch.msgid.link/20260628230715.2982552-1-fuchsfl@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d86d4f8cbb5a55a3b9b86f7b5ab8c4cdda600a3f upstream.
Commit 44f920069911 ("Input: gscps2 - use guard notation when
acquiring spinlock") moved the receive loop into gscps2_read_data()
and gscps2_report_data().
While moving the code, it preserved the writes to
buffer[ps2port->append], but omitted the following producer index
update from the original loop:
ps2port->append = (ps2port->append + 1) & BUFFER_SIZE;
As a result, append never advances. Since gscps2_report_data() only
reports bytes while act != append, the receive buffer always appears
empty and no keyboard or mouse data reaches the serio core.
Restore the omitted index update.
Fixes: 44f920069911 ("Input: gscps2 - use guard notation when acquiring spinlock")
Cc: stable@vger.kernel.org # 6.13+
Signed-off-by: Xu Rao <raoxu@uniontech.com>
Link: https://patch.msgid.link/460B5655BA580C60+20260624094739.850306-1-raoxu@uniontech.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 66725039f7090afe14c31bd259e2059a68f04023 upstream.
mms114_interrupt() reads a packet of touch data from the device into a
fixed-size on-stack buffer
struct mms114_touch touch[MMS114_MAX_TOUCH];
which holds MMS114_MAX_TOUCH (10) events of MMS114_EVENT_SIZE (8) bytes,
i.e. 80 bytes. The length of the I2C read into it is taken verbatim from
the device:
packet_size = mms114_read_reg(data, MMS114_PACKET_SIZE);
if (packet_size <= 0)
goto out;
...
error = __mms114_read_reg(data, MMS114_INFORMATION, packet_size,
(u8 *)touch);
packet_size is a single device register byte (0x0F) and the only check
is the lower bound packet_size <= 0; it is never bounded against the
size of touch[]. A malfunctioning, malicious or counterfeit controller
(or an attacker tampering with the I2C bus) can report a packet_size of
up to 255, so __mms114_read_reg() writes up to 175 bytes past the end of
touch[] on the IRQ-thread stack: a stack out-of-bounds write that can
overwrite the stack canary, saved registers and the return address.
A well-formed device never reports more than the buffer holds, so reject
an oversized packet and drop the report, consistent with the handler's
other error paths, rather than reading past the buffer.
Fixes: 07b8481d4aff ("Input: add MELFAS mms114 touchscreen driver")
Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260612-b4-disp-dc4b8dc4-v1-1-d7cb0a828d92@proton.me
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 478cdd736f2ce3114f90e775d7358136d3977b94 upstream.
tw_interrupt() accumulates each non-zero serial byte into a fixed
three-byte buffer with a running index that is only reset once a full
packet has been received *and* the device's two Y bytes agree:
tw->data[tw->idx++] = data;
if (tw->idx == TW_LENGTH && tw->data[1] == tw->data[2]) {
...
tw->idx = 0;
}
The reset is gated on tw->data[1] == tw->data[2], a value the device
controls. A malicious, malfunctioning or counterfeit Touchwindow
peripheral can stream non-zero bytes whose 2nd and 3rd bytes differ: the
index reaches TW_LENGTH without the equality holding, is never reset, and
keeps growing, so tw->data[tw->idx++] walks off the end of the three-byte
array and the rest of the heap-allocated struct tw, one attacker-chosen
byte at a time -- an unbounded, device-driven heap out-of-bounds write.
Reset the index on every completed packet and report an event only when
the two Y bytes match, like the other serio touchscreen drivers do.
Fixes: 11ea3173d5f2 ("Input: add driver for Touchwin serial touchscreens")
Cc: stable@vger.kernel.org
Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me>
Link: https://patch.msgid.link/20260613-b4-disp-69921bfd-v1-1-82c036899959@proton.me
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 856668312685d9a8f32d49a135a89c429d309f81 upstream.
The workaround for XPT2046 clears the command register, giving the
touchscreen controller a NOP. The change incorrectly re-uses the
req->scratch variable which is used as rx_buf for xfer[5], so by
the time xfer[6] occurs, the contents of req->scratch may not be
0. It was found that the touchscreen controller can end up in
a completely unresponsive state due to it being given a command
the driver does not expect.
Instead, rely on the spi_transfer behavior of tx_buf being NULL to
transmit all 0 bits and use the scratch variable for the rx_buf for
both the 1 byte command to and 2 byte response from the controller.
Also relocates the scratch member of struct ser_req to force it
into a different cache line to prevent any potential issues of
DMA stepping on unrelated data in other struct members due to
sharing the same cache line.
This change was tested on real TSC2046 and ADS7843 controllers,
but not the XPT2046 the workaround was originally created for.
Confirming that the original modification to clear the command
register does not impact either real controller.
Fixes: 781a07da9bb94 ("Input: ads7846 - add dummy command register clearing cycle")
Cc: stable@vger.kernel.org
Co-developed-by: Mark Featherston <mark@embeddedTS.com>
Signed-off-by: Mark Featherston <mark@embeddedTS.com>
Signed-off-by: Kris Bahnsen <kris@embeddedTS.com>
Link: https://patch.msgid.link/20260507164943.760009-1-kris@embeddedTS.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a6ac4e24c1a8a533bb61035184fdcc7eede4cc8d upstream.
The MMS134S and MMS136 touch controllers have an event size of 6 bytes
rather than 8 bytes. When __mms114_read_reg() reads the touch data
packet from the device into the touch buffer, the events are packed
tightly at 6-byte intervals. However, the driver iterates through the
events using standard C array indexing (touch[index]), where each
element is sizeof(struct mms114_touch) (8 bytes) apart. As a result, any
touch events beyond the first one are read from incorrect offsets and
parsed improperly.
Fix this by explicitly calculating the byte offset for each touch event
based on the device's specific event size.
Fixes: 53fefdd1d3a3 ("Input: mms114 - support MMS136")
Fixes: ab108678195f ("Input: mms114 - support MMS134S")
Reported-by: sashiko-bot@kernel.org
Assisted-by: Antigravity:gemini-3.5-flash
Reviewed-by: Bryam Vargas <hexlabsecurity@proton.me>
Link: https://patch.msgid.link/20260616050912.1531241-1-dmitry.torokhov@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0e9943d2e4c63496b6ca84bc66fd3c71d40558e2 upstream.
iforce_process_packet() handles a status report (packet id 0x02) by
taking a force-feedback effect index straight from the device wire and
using it to address the per-effect state array:
i = data[1] & 0x7f;
if (data[1] & 0x80) {
if (!test_and_set_bit(FF_CORE_IS_PLAYED,
iforce->core_effects[i].flags))
...
} else if (test_and_clear_bit(FF_CORE_IS_PLAYED,
iforce->core_effects[i].flags)) {
...
}
The index is masked only with 0x7f, so it ranges 0..127, but
core_effects[] holds only IFORCE_EFFECTS_MAX (32) entries. For an index
of 32..127 the test_and_set_bit()/test_and_clear_bit() is an
out-of-bounds single-bit read-modify-write past the array. core_effects[]
is the second-to-last member of struct iforce, so the write lands in the
trailing members and beyond the embedding kzalloc()'d iforce_serio /
iforce_usb object.
data[1] is unvalidated device payload on both transports (the USB
interrupt endpoint and serio), and the status path is not gated on force
feedback being present, so a malicious or counterfeit device can set or
clear a bit at an attacker-chosen offset past the object.
Reject an out-of-range index instead of indexing with it. Bound against
the array dimension IFORCE_EFFECTS_MAX rather than dev->ff->max_effects so
the check guarantees memory safety regardless of how many effects the
device registered. A legitimate "effect started/stopped" status always
carries an index below IFORCE_EFFECTS_MAX, so well-formed devices are
unaffected; the neighbouring mark_core_as_ready() loop is already bounded
and is left untouched.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260613-b4-disp-4828d263-v1-1-02320e1a89dd@proton.me
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5ed62a96e06be4e94b8296b7932afee550a70e04 upstream.
goodix_ts_read_input_report() copies the number of touch points reported
by the device into an on-stack buffer
u8 point_data[2 + GOODIX_MAX_CONTACT_SIZE * GOODIX_MAX_CONTACTS];
which is sized for at most GOODIX_MAX_CONTACTS (10) contacts. The only
runtime check bounds the per-interrupt count against ts->max_touch_num,
but that value is taken verbatim from a 4-bit field of the device
configuration block and is never clamped:
ts->max_touch_num = ts->config[MAX_CONTACTS_LOC] & 0x0f;
The nibble can be 0..15, so a malfunctioning, malicious or counterfeit
controller (or an attacker tampering with the I2C bus) can advertise up
to 15 contacts. goodix_ts_read_input_report() then accepts a touch_num
of up to 15 and the second goodix_i2c_read() writes
ts->contact_size * (touch_num - 1) bytes past the one-contact header into
point_data - up to 30 bytes (45 with the 9-byte report format) beyond the
92-byte buffer: a stack out-of-bounds write.
Clamp max_touch_num to GOODIX_MAX_CONTACTS, the number of contacts
point_data[] is sized for, when reading it from the configuration.
Fixes: a7ac7c95d468 ("Input: goodix - use max touch number from device config")
Cc: stable@vger.kernel.org
Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me>
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Link: https://patch.msgid.link/20260612-b4-disp-6844625d-v1-1-df0aed080c9d@proton.me
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit df2b818fa009c10ff6ba875a1663ff001cda9558 upstream.
The Elan I2C touchpad driver queries the device for its physical
dimensions and trace counts to calculate the device resolution and width.
However, if the device firmware or device tree provides invalid zero
values for x_traces or y_traces, it results in a fatal division-by-zero
exception leading to a kernel panic during device probe.
Add checks to ensure these parameters are non-zero before performing
the division. If invalid trace values are detected, fall back to a safe
default of 1.
Additionally, prevent an arithmetic underflow in the touch reporting
logic. Previously, if the calculated or fallback width was smaller than
ETP_FWIDTH_REDUCE (90), the subtraction would underflow, resulting in a
massive unsigned integer being reported to userspace. Clamp the adjusted
width to a minimum of 0 to safely handle small physical dimensions and
fallback scenarios.
Completing the probe with safe fallback values ensures the sysfs nodes
are created, keeping the firmware update path intact so a recovery
firmware can be flashed to the device.
Fixes: 6696777c6506 ("Input: add driver for Elan I2C/SMbus touchpad")
Fixes: e3a9a1290688 ("Input: elan_i2c - do not query the info if they are provided")
Signed-off-by: Ranjan Kumar <kumarranja@chromium.org>
Link: https://patch.msgid.link/20260612060339.3829666-1-kumarranja@chromium.org
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d577e46785d45484b2ab7e7309c49b18764bf56c upstream.
rmi_f30_map_gpios() allocates gpioled_key_map with
min(gpioled_count, TRACKSTICK_RANGE_END) == at most 6 entries, but
rmi_f30_attention() iterates the full f30->gpioled_count (device query
register, range 0..31) and dereferences gpioled_key_map[i], and
input->keycodemax is set to the full gpioled_count while input->keycode
points at the 6-entry allocation.
A device that reports gpioled_count > 6 with GPIO support enabled
therefore causes an out-of-bounds read on the attention interrupt and
out-of-bounds read/write through the EVIOCGKEYCODE/EVIOCSKEYCODE ioctls,
which bound the index only against keycodemax. This is the same defect
as the F3A handler, which was copied from F30.
Size the keymap for the full gpioled_count; the mapping loop still
assigns only the first min(gpioled_count, TRACKSTICK_RANGE_END) entries.
Fixes: 3e64fcbdbd10 ("Input: synaptics-rmi4 - limit the range of what GPIOs are buttons")
Cc: stable@vger.kernel.org
Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me>
Link: https://patch.msgid.link/20260614-b4-disp-818d6bda-v1-2-cf39a3615085@proton.me
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 57c10915f2c16c90e0d46ad00876bf39ece40fc2 upstream.
rmi_f3a_initialize() takes the GPIO count from the device query register
(f3a->gpio_count = buf & RMI_F3A_GPIO_COUNT, range 0..127).
rmi_f3a_map_gpios() then allocates gpio_key_map with
min(gpio_count, TRACKSTICK_RANGE_END) == at most 6 entries, but
rmi_f3a_attention() iterates the full gpio_count and dereferences
gpio_key_map[i], and input->keycodemax is set to the full gpio_count
while input->keycode points at the 6-entry allocation.
A device that reports gpio_count > 6 therefore causes an out-of-bounds
read of gpio_key_map[] on every attention interrupt, and out-of-bounds
accesses through the input core's default keymap ioctls: EVIOCGKEYCODE
reads past the buffer (leaking adjacent slab memory to user space) and
EVIOCSKEYCODE writes a caller-controlled value past it, for any process
able to open the evdev node, since input_default_getkeycode() and
input_default_setkeycode() only bound the index against keycodemax.
Size the keymap for the full gpio_count. The mapping loop is unchanged:
it still assigns only the first min(gpio_count, TRACKSTICK_RANGE_END)
entries; the remaining slots stay KEY_RESERVED (devm_kcalloc zero-fills)
and are skipped when reporting.
Fixes: 9e4c596bfd00 ("Input: synaptics-rmi4 - add support for F3A")
Cc: stable@vger.kernel.org
Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me>
Link: https://patch.msgid.link/20260614-b4-disp-818d6bda-v1-1-cf39a3615085@proton.me
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
registration failure
commit 6251f7d3472c0409e30f8d6a24f10d33d12e3f9a upstream.
If rmi_register_physical_driver() fails, the current error path
unregisters only the RMI bus. The function handlers registered
earlier remain registered with the driver core.
Add a separate error path to unregister the function handlers
before unregistering the bus in this failure case.
Fixes: 2b6a321da9a2 ("Input: synaptics-rmi4 - add support for Synaptics RMI4 devices")
Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260610064633.2837084-1-haoxiang_li2024@163.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit fb402386af4cdce108ff991a796386de55439735 upstream.
After commit 9cf6e24c9fbf17e52de9fff07f12be7565ea6d61 ("Input: atkbd -
do not skip atkbd_deactivate() when skipping ATKBD_CMD_GETID"), HONOR
BCC-N, aka HONOR MagicBook 14 2026's internal keyboard stops
working. Adding the atkbd_deactivate_fixup quirk fixes it.
DMI: HONOR BCC-N/BCC-N-PCB, BIOS 1.04 04/07/2026
Fixes: 9cf6e24c9fbf17e52de9fff07f12be7565ea6d61 ("Input: atkbd - do not skip atkbd_deactivate() when skipping ATKBD_CMD_GETID")
Reported-by: Hongfei Ren <lcrhf@outlook.com>
Link: https://github.com/colorcube/Linux-on-Honor-Magicbook-14-Pro/issues/1#issuecomment-4562679891
Tested-by: Hongfei Ren <lcrhf@outlook.com>
Cc: stable@kernel.org
Signed-off-by: Cryolitia PukNgae <cryolitia.pukngae@linux.dev>
Link: https://patch.msgid.link/20260605-honor-v1-1-78e05e491193@linux.dev
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ad0979fe053e9f2db82da82188256ef6eb41095a upstream.
The Lenovo Yoga Air 14 (83QK) laptop keyboard becomes unresponsive
after the standard atkbd init sequence. Controlled testing on the
actual hardware shows the F5 (ATKBD_CMD_RESET_DIS / deactivate)
command specifically corrupts the EC state, causing zero IRQ1
interrupts after init.
Skipping only the deactivate command (while keeping F4 ENABLE)
resolves the issue completely: both keystroke input and CapsLock
LED toggle work correctly. The reverse test - skipping only F4
while keeping F5 - makes the problem worse (zero keystroke
interrupts), confirming F5 is the sole culprit.
Add a DMI quirk entry for LENOVO/83QK using the existing
atkbd_deactivate_fixup callback, consistent with the existing
entries for LG Electronics and HONOR FMB-P that address the
same EC F5 deactivate issue.
Signed-off-by: Zeyu WANG <zeyu.thomas.wang@gmail.com>
Link: https://patch.msgid.link/20260602170909.14725-1-zeyu.thomas.wang@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 16ca52bc209fa4bf9239cd9e5643e95533476b58 upstream.
The Lenovo ThinkPad E490 (PNP ID: LEN2058) has a Synaptics TM3471-020
touchpad that supports SMBus/RMI4 mode but is not listed in
smbus_pnp_ids[]. Without this entry, RMI4 over SMBus is not enabled
by default, and the touchpad falls back to PS/2 mode.
Adding LEN2058 to the passlist enables automatic RMI4 detection without
requiring the psmouse.synaptics_intertouch parameter, and matches
the behavior of similar ThinkPad models already in the list
(E480/LEN2054, E580/LEN2055).
Tested on ThinkPad E490 with kernel 7.0.5-zen1 and Arch Linux.
RMI4 over SMBus is confirmed working without any kernel parameters.
Signed-off-by: Nicolás Bazaes <contacto@bazaes.cl>
Assisted-by: Claude:claude-sonnet-4-6
Link: https://patch.msgid.link/20260514013552.14234-1-contacto@bazaes.cl
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit baa0210fb6a9dc3882509a9411b6d284d88fe30e upstream.
When a configuration file provides an object size that is larger than the
driver's known mxt_obj_size(object), the driver intends to discard the
extra bytes.
The loop iterates using for (i = 0; i < size; i++). Inside the loop, the
condition to skip processing extra bytes is:
if (i > mxt_obj_size(object))
continue;
Since i is a 0-based index, the valid indices for the object are 0 through
mxt_obj_size(object) - 1.
When i == mxt_obj_size(object), the condition evaluates to false, and the
code processes the byte instead of discarding it.
This causes the code to calculate byte_offset = reg + i - cfg->start_ofs
and writes the byte there, overwriting exactly one byte of the adjacent
instance or object.
Update the boundary check to skip extra bytes correctly by using >=.
Fixes: 50a77c658b80 ("Input: atmel_mxt_ts - download device config using firmware loader")
Cc: stable@vger.kernel.org
Assisted-by: Gemini:gemini-3.1-pro
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://patch.msgid.link/20260504185448.4055973-1-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c897cf120696b94f56ed0f3197ba9a77071a59ec upstream.
Add the VID/PIDs for the ASUS ROG RAIKIRI II controller to xpad_device
and the VID to xpad_table. The controller has a physical PC/XBOX toggle
which switches between XBOX360 and XBOXONE protocols.
Signed-off-by: Dmitriy Zharov <contact@zharov.dev>
Link: https://patch.msgid.link/20260430183522.122151-1-contact@zharov.dev
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1f6ac0f8441c48c4cc250141e1da8486c13512ba upstream.
Add support for the gamepad "Nova 2 Lite" from GameSir, compatible with
the Xbox 360 gamepad.
Signed-off-by: Qbeliw Tanaka <q.tanaka@gmx.com>
Link: https://patch.msgid.link/20260429.162040.930225048583399359.q.tanaka@gmx.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 76b0d0baa9ae9c60e726bbe1b6ff0bec2c993634 upstream.
Ensure that the firmware file is large enough to contain the expected
number of pages and the signature (which resides at the end of the
firmware blob) before accessing them to prevent potential out-of-bounds
reads.
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/ae2dOgiFvXRm4BHo@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6cdc46b38cf146ce81d4831b6472dbf7731849a2 upstream.
xpadone_process_packet() receives len directly from urb->actual_length
and uses it to index the share-button byte at data[len - 18] or
data[len - 26]. Since both len and data[0] are under the device's
control, a broken controller can send a GIP_CMD_INPUT packet with
actual_length < 18 (e.g. 5 bytes) and reach this code path, causing
accesses beyond the actual array.
Fix this by calculating the offset and checking bounds against the
packet length.
Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes: 4ef46367073b ("Input: xpad - fix Share button on Xbox One controllers")
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit dab48a7e74e6a394f3aa0461a2b1fb0c7b38fcb8 upstream.
The input buffer size is pcu->max_in_size, but pcu->max_out_size is
passed to usb_free_coherent().
Change size to match the allocation size.
Fixes: 628329d52474 ("Input: add IMS Passenger Control Unit driver")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Link: https://patch.msgid.link/20260522085412.45430-2-fourier.thomas@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2905281cbda52ec9df540113b35b835feb5fafd3 upstream.
nexio_read_data() pulls data_len and x_len from a packed __be16 header
in the device's interrupt packet and then walks packet->data[0..x_len)
and packet->data[x_len..data_len) comparing each byte against a
threshold.
Both fields are 16-bit on the wire (max 65535). The existing
adjustments shave at most 0x100 / 0x80 off, so the loop bound can still
reach roughly 0xfeff. The URB transfer buffer for NEXIO is rept_size
(1024) bytes from usb_alloc_coherent(), with the first 7 occupied by the
packed header — so packet->data[] has 1017 valid bytes. read_data()
callbacks are not given urb->actual_length, and nothing else bounds the
walk.
A device that lies about its length can get a ~64 KiB out-of-bounds read
past the coherent DMA allocation. The first index whose byte exceeds
NEXIO_THRESHOLD lands in begin_x / begin_y and from there into the
reported touch coordinates, so adjacent kernel memory contents leak to
userspace as ABS_X / ABS_Y events. Far enough out, the read can also
hit an unmapped page and fault.
Fix this all by clamping data_len to the buffer's data[] capacity and
x_len to data_len.
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Fixes: 5197424cdccc ("Input: usbtouchscreen - add NEXIO (or iNexio) support")
Cc: stable <stable@kernel.org>
Assisted-by: gkh_clanker_t1000
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/2026042026-chlorine-epidermis-fd6d@gregkh
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f5f9e07060519e2287e99019a6de1eb3ebb65c37 upstream.
The commit 68743c500c6e ("Input: edt-ft5x06 - use per-client debugfs
directory") removed the manual debugfs teardown, relying on the I2C core
to handle it. However, this creates a window where debugfs files are
still accessible after edt_ft5x06_ts_teardown_debugfs() frees
tsdata->raw_buffer.
To prevent a use-after-free, protect the freeing of raw_buffer with the
device mutex and set raw_buffer to NULL. The debugfs read function
already checks if raw_buffer is NULL under the same mutex, so this
safely avoids the use-after-free.
Fixes: 68743c500c6e ("Input: edt-ft5x06 - use per-client debugfs directory")
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/adnJicDh-bTUaWXP@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ff14dafde15c11403fac61367a34fea08926e9ee upstream.
To avoid racing with FF playback events and corrupting device's event
queue take event_lock spinlock when calling uinput_dev_event() when
submitting a FF upload or erase "event".
Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Link: https://patch.msgid.link/adXkf6MWzlB8LA_s@google.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 4cda78d6f8bf2b700529f2fbccb994c3e826d7c2 upstream.
A lockdep circular locking dependency warning can be triggered
reproducibly when using a force-feedback gamepad with uinput (for
example, playing ELDEN RING under Wine with a Flydigi Vader 5
controller):
ff->mutex -> udev->mutex -> input_mutex -> dev->mutex -> ff->mutex
The cycle is caused by four lock acquisition paths:
1. ff upload: input_ff_upload() holds ff->mutex and calls
uinput_dev_upload_effect() -> uinput_request_submit() ->
uinput_request_send(), which acquires udev->mutex.
2. device create: uinput_ioctl_handler() holds udev->mutex and calls
uinput_create_device() -> input_register_device(), which acquires
input_mutex.
3. device register: input_register_device() holds input_mutex and
calls kbd_connect() -> input_register_handle(), which acquires
dev->mutex.
4. evdev release: evdev_release() calls input_flush_device() under
dev->mutex, which calls input_ff_flush() acquiring ff->mutex.
Fix this by introducing a new state_lock spinlock to protect
udev->state and udev->dev access in uinput_request_send() instead of
acquiring udev->mutex. The function only needs to atomically check
device state and queue an input event into the ring buffer via
uinput_dev_event() -- both operations are safe under a spinlock
(ktime_get_ts64() and wake_up_interruptible() do not sleep). This
breaks the ff->mutex -> udev->mutex link since a spinlock is a leaf in
the lock ordering and cannot form cycles with mutexes.
To keep state transitions visible to uinput_request_send(), protect
writes to udev->state in uinput_create_device() and
uinput_destroy_device() with the same state_lock spinlock.
Additionally, move init_completion(&request->done) from
uinput_request_send() to uinput_request_submit() before
uinput_request_reserve_slot(). Once the slot is allocated,
uinput_flush_requests() may call complete() on it at any time from
the destroy path, so the completion must be initialised before the
request becomes visible.
Lock ordering after the fix:
ff->mutex -> state_lock (spinlock, leaf)
udev->mutex -> state_lock (spinlock, leaf)
udev->mutex -> input_mutex -> dev->mutex -> ff->mutex (no back-edge)
Fixes: ff462551235d ("Input: uinput - switch to the new FF interface")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/CABXGCsMoxag+kEwHhb7KqhuyxfmGGd0P=tHZyb1uKE0pLr8Hkg@mail.gmail.com/
Signed-off-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Link: https://patch.msgid.link/20260407075031.38351-1-mikhail.v.gavrilov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e2b0ae529db4766584e77647cefe3ec15c3d842e upstream.
Add device IDs for the Razer Wolverine V3 Pro controller in both
wired (0x0a57) and wireless 2.4 GHz dongle (0x0a59) modes.
The controller uses the Xbox 360 protocol (vendor-specific class,
subclass 93, protocol 1) on interface 0 with an identical 20-byte
input report layout, so no additional processing is needed.
Signed-off-by: Zoltan Illes <zoliviragh@gmail.com>
Link: https://patch.msgid.link/20260329220031.1325509-1-137647604+ZlordHUN@users.noreply.github.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0d9363a764d9d601a05591f9695cea8b429e9be3 upstream.
BETOP's BTP-KP50B and BTP-KP50C controller's wireless dongles are both
working as standard Xbox 360 controllers. Add USB device IDs for them to
xpad driver.
Signed-off-by: Shengyu Qu <wiagn233@outlook.com>
Link: https://patch.msgid.link/TY4PR01MB14432B4B298EA186E5F86C46B9855A@TY4PR01MB14432.jpnprd01.prod.outlook.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit fc1e8a6f129d87c64ac8e58b50d9dfa66217cfda upstream.
Mode switches sent before control response are ignored. This results in
an unresponsive trackpad and "bcm5974: bad trackpad package, length: 8"
repeated in logs.
On receiving unknown 8-byte packets, assume that mode switch was ignored
and schedule an asynchronous mode reset. The reset will switch the
device to normal mode, wait, then switch back to wellspring mode.
Signed-off-by: Liam Mitchell <mitchell.liam@gmail.com>
Link: https://lore.kernel.org/linux-input/CAOQ1CL4+DP1TuLAGNsz5GdFBTHvnTg=5q=Dr2Z1OQc6RXydSYA@mail.gmail.com/
Acked-by: Henrik Rydberg <rydberg@bitmath.org>
Link: https://patch.msgid.link/20260213-bcm5974-reset-v2-1-1837851336b0@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5839419cffc7788a356428d321e3ec18055c0286 upstream.
The device occasionally wakes up from suspend with missing input on the
internal keyboard and the following suspend attempt results in an instant
wake-up. The quirks fix both issues for this device.
Signed-off-by: Christoffer Sandberg <cs@tuxedo.de>
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Link: https://patch.msgid.link/20260223142054.50310-1-wse@tuxedocomputers.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7adaaee5edd35a423ae199c41b86bd1ed60ed483 upstream.
Lock f54->data_mutex when entering the function statement since jumping
to the 'error' label when checking report_size fails causes that mutex
to be unlocked.
This bug has been detected by the Clang thread-safety checker.
Fixes: 3a762dbd5347 ("[media] Input: synaptics-rmi4 - add support for F54 diagnostics")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20260223215118.2154194-16-bvanassche@acm.org
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 870c2e7cd881d7a10abb91f2b38135622d9f9f65 ]
synaptics_i2c_resume() restarts delayed work unconditionally, even when
the input device is not opened. Guard the polling restart by taking the
input device mutex and checking input_device_enabled() before re-queuing
the delayed work.
Fixes: eef3e4cab72ea ("Input: add driver for Synaptics I2C touchpad")
Signed-off-by: Minseong Kim <ii4gsp@gmail.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260121063738.799967-1-ii4gsp@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b3ee88e27798f0e8dd3a81867804d693da74d57d ]
Currently if a user enqueues a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistency cannot be addressed without refactoring the API.
This patch continues the effort to refactor worqueue APIs, which has begun
with the change introducing new workqueues and a new alloc_workqueue flag:
commit 128ea9f6ccfb ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566af ("workqueue: Add new WQ_PERCPU flag")
This specific workload do not benefit from a per-cpu workqueue, so use
the default unbound workqueue (system_dfl_wq) instead.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Link: https://patch.msgid.link/20251106141955.218911-4-marco.crivellari@suse.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Stable-dep-of: 870c2e7cd881 ("Input: synaptics_i2c - guard polling restart in resume")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 2934325f56150ad8dab8ab92cbe2997242831396 upstream.
The ASUS Zenbook UX425QA_UM425QA fails to initialize the keyboard after
a cold boot.
A quirk already exists for "ZenBook UX425", but some Zenbooks report
"Zenbook" with a lowercase 'b'. Since DMI matching is case-sensitive,
the existing quirk is not applied to these "extra special" Zenbooks.
Testing confirms that this model needs the same quirks as the ZenBook
UX425 variants.
Signed-off-by: feng <alec.jiang@gmail.com>
Link: https://patch.msgid.link/20260122013957.11184-1-alec.jiang@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 19a5d9ba6208e9006a2a9d5962aea4d6e427d8ab upstream.
The MECHREVO Wujie 15X Pro requires several i8042 quirks to function
correctly. Specifically, NOMUX, RESET_ALWAYS, NOLOOP, and NOPNP are
needed to ensure the keyboard and touchpad work reliably.
Signed-off-by: gongqi <550230171hxy@gmail.com>
Link: https://patch.msgid.link/20260122155501.376199-3-550230171hxy@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit aed3716db7fff74919cc5775ca3a80c8bb246489 upstream.
The device occasionally wakes up from suspend with missing input on the
internal keyboard and the following suspend attempt results in an instant
wake-up. The quirks fix both issues for this device.
Signed-off-by: Christoffer Sandberg <cs@tuxedo.de>
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251124203336.64072-1-wse@tuxedocomputers.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
