summaryrefslogtreecommitdiff
path: root/drivers/input
AgeCommit message (Collapse)AuthorFilesLines
2020-12-02Input: i8042 - allow insmod to succeed on devices without an i8042 controllerHans de Goede1-1/+11
[ Upstream commit b1884583fcd17d6a1b1bba94bbb5826e6b5c6e17 ] The i8042 module exports several symbols which may be used by other modules. Before this commit it would refuse to load (when built as a module itself) on systems without an i8042 controller. This is a problem specifically for the asus-nb-wmi module. Many Asus laptops support the Asus WMI interface. Some of them have an i8042 controller and need to use i8042_install_filter() to filter some kbd events. Other models do not have an i8042 controller (e.g. they use an USB attached kbd). Before this commit the asus-nb-wmi driver could not be loaded on Asus models without an i8042 controller, when the i8042 code was built as a module (as Arch Linux does) because the module_init function of the i8042 module would fail with -ENODEV and thus the i8042_install_filter symbol could not be loaded. This commit fixes this by exiting from module_init with a return code of 0 if no controller is found. It also adds a i8042_present bool to make the module_exit function a no-op in this case and also adds a check for i8042_present to the exported i8042_command function. The latter i8042_present check should not really be necessary because when builtin that function can already be used on systems without an i8042 controller, but better safe then sorry. Reported-and-tested-by: Marius Iacob <themariusus@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20201008112628.3979-2-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-24Input: elan_i2c - fix firmware update on newer ICsjingle.wu4-8/+9
[ Upstream commit ae3d6083acf60116d4f409677452399547ed2009 ] The argument to iap page type command depends on the firmware page size. Fixes: bfd9b92bc8f9 ("Input: elan_i2c - handle firmware updated on newer ICs") Signed-off-by: Jingle Wu <jingle.wu@emc.com.tw> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-24Input: resistive-adc-touch - fix kconfig dependency on IIO_BUFFERNecip Fazil Yildiran1-0/+1
[ Upstream commit 676650d007e06fddcf3fe38238251d71bd179641 ] When TOUCHSCREEN_ADC is enabled and IIO_BUFFER is disabled, it results in the following Kbuild warning: WARNING: unmet direct dependencies detected for IIO_BUFFER_CB Depends on [n]: IIO [=y] && IIO_BUFFER [=n] Selected by [y]: - TOUCHSCREEN_ADC [=y] && !UML && INPUT [=y] && INPUT_TOUCHSCREEN [=y] && IIO [=y] The reason is that TOUCHSCREEN_ADC selects IIO_BUFFER_CB without depending on or selecting IIO_BUFFER while IIO_BUFFER_CB depends on IIO_BUFFER. This can also fail building the kernel. Honor the kconfig dependency to remove unmet direct dependency warnings and avoid any potential build failures. Fixes: aa132ffb6b0a ("input: touchscreen: resistive-adc-touch: add generic resistive ADC touchscreen") Signed-off-by: Necip Fazil Yildiran <fazilyildiran@gmail.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/20201102221504.541279-1-fazilyildiran@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-24Input: adxl34x - clean up a data type in adxl34x_probe()Dan Carpenter1-1/+1
[ Upstream commit 33b6c39e747c552fa770eecebd1776f1f4a222b1 ] The "revid" is used to store negative error codes so it should be an int type. Fixes: e27c729219ad ("Input: add driver for ADXL345/346 Digital Accelerometers") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Michael Hennerich <michael.hennerich@analog.com> Link: https://lore.kernel.org/r/20201026072824.GA1620546@mwanda Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-22Input: sunkbd - avoid use-after-free in teardown pathsDmitry Torokhov1-8/+33
commit 77e70d351db7de07a46ac49b87a6c3c7a60fca7e upstream. We need to make sure we cancel the reinit work before we tear down the driver structures. Reported-by: Bodong Zhao <nopitydays@gmail.com> Tested-by: Bodong Zhao <nopitydays@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-05hil/parisc: Disable HIL driver when it gets stuckHelge Deller2-7/+22
commit 879bc2d27904354b98ca295b6168718e045c4aa2 upstream. When starting a HP machine with HIL driver but without an HIL keyboard or HIL mouse attached, it may happen that data written to the HIL loop gets stuck (e.g. because the transaction queue is full). Usually one will then have to reboot the machine because all you see is and endless output of: Transaction add failed: transaction already queued? In the higher layers hp_sdc_enqueue_transaction() is called to queued up a HIL packet. This function returns an error code, and this patch adds the necessary checks for this return code and disables the HIL driver if further packets can't be sent. Tested on a HP 730 and a HP 715/64 machine. Signed-off-by: Helge Deller <deller@gmx.de> Cc: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-29Input: sun4i-ps2 - fix handling of platform_get_irq() errorKrzysztof Kozlowski1-6/+3
[ Upstream commit cafb3abea6136e59ea534004e5773361e196bb94 ] platform_get_irq() returns -ERRNO on error. In such case comparison to 0 would pass the check. Fixes: e443631d20f5 ("Input: serio - add support for Alwinner A10/A20 PS/2 controller") Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Chen-Yu Tsai <wens@csie.org> Link: https://lore.kernel.org/r/20200828145744.3636-4-krzk@kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-29Input: twl4030_keypad - fix handling of platform_get_irq() errorKrzysztof Kozlowski1-5/+3
[ Upstream commit c277e1f0dc3c7d7b5b028e20dd414df241642036 ] platform_get_irq() returns -ERRNO on error. In such case casting to unsigned and comparing to 0 would pass the check. Fixes: 7abf38d6d13c ("Input: twl4030-keypad - add device tree support") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200828145744.3636-3-krzk@kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-29Input: omap4-keypad - fix handling of platform_get_irq() errorKrzysztof Kozlowski1-4/+2
[ Upstream commit 4738dd1992fa13acfbbd71800c71c612f466fa44 ] platform_get_irq() returns -ERRNO on error. In such case comparison to 0 would pass the check. Fixes: f3a1ba60dbdb ("Input: omap4-keypad - use platform device helpers") Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200828145744.3636-2-krzk@kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-29Input: ep93xx_keypad - fix handling of platform_get_irq() errorKrzysztof Kozlowski1-2/+2
[ Upstream commit 7d50f6656dacf085a00beeedbc48b19a37d17881 ] platform_get_irq() returns -ERRNO on error. In such case comparison to 0 would pass the check. Fixes: 60214f058f44 ("Input: ep93xx_keypad - update driver to new core support") Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200828145744.3636-1-krzk@kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-29Input: stmfts - fix a & vs && typoYueHaibing1-1/+1
[ Upstream commit d04afe14b23651e7a8bc89727a759e982a8458e4 ] In stmfts_sysfs_hover_enable_write(), we should check value and sdata->hover_enabled is all true. Fixes: 78bcac7b2ae1 ("Input: add support for the STMicroelectronics FingerTip touchscreen") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20200916141941.16684-1-yuehaibing@huawei.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-29Input: imx6ul_tsc - clean up some errors in imx6ul_tsc_resume()Dan Carpenter1-11/+16
[ Upstream commit 30df23c5ecdfb8da5b0bc17ceef67eff9e1b0957 ] If imx6ul_tsc_init() fails then we need to clean up the clocks. I reversed the "if (input_dev->users) {" condition to make the code a bit simpler. Fixes: 6cc527b05847 ("Input: imx6ul_tsc - propagate the errors") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20200905124942.GC183976@mwanda Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-29Input: elants_i2c - fix typo for an attribute to show calibration countJohnny Chuang1-1/+1
[ Upstream commit 93f634069707cfe562c38739f5062feccbe9a834 ] Fixed typo for command from 0xE0 to 0xD0. Fixes: cf520c643012 ("Input: elants_i2c - provide an attribute to show calibration count") Signed-off-by: Johnny Chuang <johnny.chuang.emc@gmail.com> Link: https://lore.kernel.org/r/1600238783-32303-1-git-send-email-johnny.chuang.emc@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-03Merge branch 'for-linus' of ↵Linus Torvalds2-0/+9
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: "A couple more driver quirks, now enabling newer trackpoints from Synaptics for real" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: i8042 - add nopnp quirk for Acer Aspire 5 A515 Input: trackpoint - enable Synaptics trackpoints
2020-09-29Input: i8042 - add nopnp quirk for Acer Aspire 5 A515Jiri Kosina1-0/+7
Touchpad on this laptop is not detected properly during boot, as PNP enumerates (wrongly) AUX port as disabled on this machine. Fix that by adding this board (with admittedly quite funny DMI identifiers) to nopnp quirk list. Reported-by: Andrés Barrantes Silman <andresbs2000@protonmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Link: https://lore.kernel.org/r/nycvar.YFH.7.76.2009252337340.3336@cbobk.fhfr.pm Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-09-29Input: trackpoint - enable Synaptics trackpointsVincent Huang1-0/+2
Add Synaptics IDs in trackpoint_start_protocol() to mark them as valid. Signed-off-by: Vincent Huang <vincent.huang@tw.synaptics.com> Fixes: 6c77545af100 ("Input: trackpoint - add new trackpoint variant IDs") Reviewed-by: Harry Cutts <hcutts@chromium.org> Tested-by: Harry Cutts <hcutts@chromium.org> Link: https://lore.kernel.org/r/20200924053013.1056953-1-vincent.huang@tw.synaptics.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-09-20Merge branch 'for-linus' of ↵Linus Torvalds3-8/+28
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: "Just a couple of driver quirks" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: trackpoint - add new trackpoint variant IDs Input: i8042 - add Entroware Proteus EL07R4 to nomux and reset lists
2020-09-14Input: trackpoint - add new trackpoint variant IDsVincent Huang2-8/+12
Add trackpoint variant IDs to allow supported control on Synaptics trackpoints. Signed-off-by: Vincent Huang <vincent.huang@tw.synaptics.com> Link: https://lore.kernel.org/r/20200914120327.2592-1-vincent.huang@tw.synaptics.com Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-09-09Input: i8042 - add Entroware Proteus EL07R4 to nomux and reset listsHans de Goede1-0/+16
The keyboard drops keypresses early during boot unless both the nomux and reset quirks are set. Add DMI table entries for this. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1806085 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20200907095656.13155-1-hdegoede@redhat.com Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-08-24treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva5-6/+5
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-08-16Merge tag 'sh-for-5.9' of git://git.libc.org/linux-shLinus Torvalds1-2/+0
Pull arch/sh updates from Rich Felker: "Cleanup, SECCOMP_FILTER support, message printing fixes, and other changes to arch/sh" * tag 'sh-for-5.9' of git://git.libc.org/linux-sh: (34 commits) sh: landisk: Add missing initialization of sh_io_port_base sh: bring syscall_set_return_value in line with other architectures sh: Add SECCOMP_FILTER sh: Rearrange blocks in entry-common.S sh: switch to copy_thread_tls() sh: use the generic dma coherent remap allocator sh: don't allow non-coherent DMA for NOMMU dma-mapping: consolidate the NO_DMA definition in kernel/dma/Kconfig sh: unexport register_trapped_io and match_trapped_io_handler sh: don't include <asm/io_trapped.h> in <asm/io.h> sh: move the ioremap implementation out of line sh: move ioremap_fixed details out of <asm/io.h> sh: remove __KERNEL__ ifdefs from non-UAPI headers sh: sort the selects for SUPERH alphabetically sh: remove -Werror from Makefiles sh: Replace HTTP links with HTTPS ones arch/sh/configs: remove obsolete CONFIG_SOC_CAMERA* sh: stacktrace: Remove stacktrace_ops.stack() sh: machvec: Modernize printing of kernel messages sh: pci: Modernize printing of kernel messages ...
2020-08-15input: i8042 - Remove special Cayman handlingGeert Uytterhoeven1-2/+0
As of commit 37744feebc086908 ("sh: remove sh5 support"), support for the SH5-based Cayman platform can no longer be selected. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Rich Felker <dalias@libc.org>
2020-08-11Merge branch 'for-linus' of ↵Linus Torvalds42-235/+641
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: - an update to Elan touchpad controller driver supporting newer ICs with enhanced precision reports and a new firmware update process - an update to EXC3000 touch controller supporting additional parts - assorted driver fixups * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (27 commits) Input: exc3000 - add support to query model and fw_version Input: exc3000 - add reset gpio support Input: exc3000 - add EXC80H60 and EXC80H84 support dt-bindings: touchscreen: Convert EETI EXC3000 touchscreen to json-schema Input: sentelic - fix error return when fsp_reg_write fails Input: alps - remove redundant assignment to variable ret Input: ims-pcu - return error code rather than -ENOMEM Input: elan_i2c - add ic type 0x15 Input: atmel_mxt_ts - only read messages in mxt_acquire_irq() when necessary Input: uinput - fix typo in function name documentation Input: ati_remote2 - add missing newlines when printing module parameters Input: psmouse - add a newline when printing 'proto' by sysfs Input: synaptics-rmi4 - drop a duplicated word Input: elan_i2c - add support for high resolution reports Input: elan_i2c - do not constantly re-query pattern ID Input: elan_i2c - add firmware update info for ICs 0x11, 0x13, 0x14 Input: elan_i2c - handle firmware updated on newer ICs Input: elan_i2c - add support for different firmware page sizes Input: elan_i2c - fix detecting IAP version on older controllers Input: elan_i2c - handle devices with patterns above 1 ...
2020-08-07Input: exc3000 - add support to query model and fw_versionSebastian Reichel1-1/+147
Expose model and fw_version via sysfs. Also query the model in probe to make sure, that the I2C communication with the device works before successfully probing the driver. This is a bit complicated, since EETI devices do not have a sync interface. Sending the commands and directly reading does not work. Sending the command and waiting for some time is also not an option, since there might be touch events in the mean time. Last but not least we do not cache the results, since this interface can be used to check the I2C communication is still working as expected. Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://lore.kernel.org/r/20200805160520.456570-5-sebastian.reichel@collabora.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-08-07Input: exc3000 - add reset gpio supportSebastian Reichel1-0/+17
Add basic support for an optional reset gpio. Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20200805160520.456570-4-sebastian.reichel@collabora.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-08-07Input: exc3000 - add EXC80H60 and EXC80H84 supportSebastian Reichel1-14/+66
This adds support for EXC80H60 and EXCH84 controllers, which use a different event type id and have two extra bits for the resolution (so the maximum is 16K instead of 4K). Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20200805160520.456570-3-sebastian.reichel@collabora.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-08-07Input: sentelic - fix error return when fsp_reg_write failsColin Ian King1-1/+1
Currently when the call to fsp_reg_write fails -EIO is not being returned because the count is being returned instead of the return value in retval. Fix this by returning the value in retval instead of count. Addresses-Coverity: ("Unused value") Fixes: fc69f4a6af49 ("Input: add new driver for Sentelic Finger Sensing Pad") Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20200603141218.131663-1-colin.king@canonical.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-08-07Input: alps - remove redundant assignment to variable retColin Ian King1-1/+1
The variable ret is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20200603135742.130852-1-colin.king@canonical.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-08-07Input: ims-pcu - return error code rather than -ENOMEMColin Ian King1-1/+1
Currently the assignment of -ENOMEM to error is redundant because error is not being read and -ENOMEM is being hard coded as an error return. Fix this by returning the error code in variable 'error'; this also allows the error code from a failed call to input_register_device to be preserved and returned to the caller rather than just returning a possibly inappropriate -ENOMEM. Kudos to Dan Carpenter for the suggestion of an improved fix. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20200603152151.139337-1-colin.king@canonical.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-08-07Merge tag 'staging-5.9-rc1' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging/IIO driver updates from Greg KH: "Here is the large set of Staging and IIO driver patches for 5.9-rc1. Lots of churn here, but overall the size increase in lines added is small, while adding a load of new IIO drivers. Major things in here: - lots and lots of IIO new drivers and frameworks added - IIO driver fixes and updates - lots of tiny coding style cleanups for staging drivers - vc04_services major reworks and cleanups We had 3 set of drivers move out of staging in this round as well: - wilc1000 wireless driver moved out of staging - speakup moved out of staging - most USB driver moved out of staging Full details are in the shortlog. All of these have been in linux-next with no reported issues. The last few changes here were to resolve reported linux-next issues, and they seem to have resolved the problems" * tag 'staging-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (428 commits) staging: most: fix up movement of USB driver staging: rts5208: clear alignment style issues staging: r8188eu: replace rtw_netdev_priv define with inline function staging: netlogic: clear alignment style issues staging: android: ashmem: Fix lockdep warning for write operation drivers: most: add USB adapter driver staging: most: Use %pM format specifier for MAC addresses staging: ks7010: Use %pM format specifier for MAC addresses staging: qlge: qlge_dbg: removed comment repition staging: wfx: Use flex_array_size() helper in memcpy() staging: rtl8723bs: Align macro definitions staging: rtl8723bs: Clean up function declations staging: rtl8723bs: Fix coding style errors drivers: staging: audio: Fix the missing header file for helper file staging: greybus: audio: Enable GB codec, audio module compilation. staging: greybus: audio: Add helper APIs for dynamic audio modules staging: greybus: audio: Resolve compilation error in topology parser staging: greybus: audio: Resolve compilation errors for GB codec module staging: greybus: audio: Maintain jack list within GB Audio module staging: greybus: audio: Update snd_jack FW usage as per new APIs ...
2020-08-04Merge tag 'uninit-macro-v5.9-rc1' of ↵Linus Torvalds2-4/+2
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull uninitialized_var() macro removal from Kees Cook: "This is long overdue, and has hidden too many bugs over the years. The series has several "by hand" fixes, and then a trivial treewide replacement. - Clean up non-trivial uses of uninitialized_var() - Update documentation and checkpatch for uninitialized_var() removal - Treewide removal of uninitialized_var()" * tag 'uninit-macro-v5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: compiler: Remove uninitialized_var() macro treewide: Remove uninitialized_var() usage checkpatch: Remove awareness of uninitialized_var() macro mm/debug_vm_pgtable: Remove uninitialized_var() usage f2fs: Eliminate usage of uninitialized_var() macro media: sur40: Remove uninitialized_var() usage KVM: PPC: Book3S PR: Remove uninitialized_var() usage clk: spear: Remove uninitialized_var() usage clk: st: Remove uninitialized_var() usage spi: davinci: Remove uninitialized_var() usage ide: Remove uninitialized_var() usage rtlwifi: rtl8192cu: Remove uninitialized_var() usage b43: Remove uninitialized_var() usage drbd: Remove uninitialized_var() usage x86/mm/numa: Remove uninitialized_var() usage docs: deprecated.rst: Add uninitialized_var()
2020-08-04Merge tag 'tasklets-v5.9-rc1' of ↵Linus Torvalds2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull tasklets API update from Kees Cook: "These are the infrastructure updates needed to support converting the tasklet API to something more modern (and hopefully for removal further down the road). There is a 300-patch series waiting in the wings to get set out to subsystem maintainers, but these changes need to be present in the kernel first. Since this has some treewide changes, I carried this series for -next instead of paining Thomas with it in -tip, but it's got his Ack. This is similar to the timer_struct modernization from a while back, but not nearly as messy (I hope). :) - Prepare for tasklet API modernization (Romain Perier, Allen Pais, Kees Cook)" * tag 'tasklets-v5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: tasklet: Introduce new initialization API treewide: Replace DECLARE_TASKLET() with DECLARE_TASKLET_OLD() usb: gadget: udc: Avoid tasklet passing a global
2020-08-04Merge tag 'rm-unicore32' of ↵Linus Torvalds2-72/+0
git://git.kernel.org/pub/scm/linux/kernel/git/rppt/linux Pull unicore32 removal from Mike Rapoport: "Remove unicore32 support. The unicore32 port do not seem maintained for a long time now, there is no upstream toolchain that can create unicore32 binaries and all the links to prebuilt toolchains for unicore32 are dead. Even compilers that were available are not supported by the kernel anymore. Guenter Roeck says: "I have stopped building unicore32 images since v4.19 since there is no available compiler that is still supported by the kernel. I am surprised that support for it has not been removed from the kernel" However, it's worth pointing out two things: - Guan Xuetao is still listed as maintainer and asked for the port to be kept around the last time Arnd suggested removing it two years ago. He promised that there would be compiler sources (presumably llvm), but has not made those available since. - https://github.com/gxt has patches to linux-4.9 and qemu-2.7, both released in 2016, with patches dated early 2019. These patches mainly restore a syscall ABI that was never part of mainline Linux but apparently used in production. qemu-2.8 removed support for that ABI and newer kernels (4.19+) can no longer be built with the old toolchain, so apparently there will not be any future updates to that git tree" * tag 'rm-unicore32' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/linux: MAINTAINERS: remove "PKUNITY SOC DRIVERS" entry rtc: remove fb-puv3 driver video: fbdev: remove fb-puv3 driver pwm: remove pwm-puv3 driver input: i8042: remove support for 8042-unicore32io i2c/buses: remove i2c-puv3 driver cpufreq: remove unicore32 driver arch: remove unicore32 port
2020-07-30treewide: Replace DECLARE_TASKLET() with DECLARE_TASKLET_OLD()Kees Cook2-2/+2
This converts all the existing DECLARE_TASKLET() (and ...DISABLED) macros with DECLARE_TASKLET_OLD() in preparation for refactoring the tasklet callback type. All existing DECLARE_TASKLET() users had a "0" data argument, it has been removed here as well. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Kees Cook <keescook@chromium.org>
2020-07-30Input: elan_i2c - add ic type 0x15Jingle Wu1-1/+2
The update firmware flow of ic type 0x15 is same with ic type 0x14. Signed-off-by: Jingle Wu <jingle.wu@emc.com.tw> Link: https://lore.kernel.org/r/20200730060526.12439-1-jingle.wu@emc.com.tw Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-07-29Input: atmel_mxt_ts - only read messages in mxt_acquire_irq() when necessaryNick Dyer1-3/+53
The workaround of reading all messages until an invalid is received is a way of forcing the CHG line high, which means that when using edge-triggered interrupts the interrupt can be acquired. With level-triggered interrupts the workaround is unnecessary. Also, most recent maXTouch chips have a feature called RETRIGEN which, when enabled, reasserts the interrupt line every cycle if there are messages waiting. This also makes the workaround unnecessary. Note: the RETRIGEN feature is only in some firmware versions/chips, it's not valid simply to enable the bit. Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org> (cherry picked from ndyer/linux/for-upstream commit 1ae4e8281e491b22442cd5acdfca1862555f8ecb) [gdavis: Fix conflicts due to v4.6-rc7 commit eb43335c4095 ("Input: atmel_mxt_ts - use mxt_acquire_irq in mxt_soft_reset").] Signed-off-by: George G. Davis <george_davis@mentor.com> [jiada: reset use_retrigen_workaround at beginning of mxt_check_retrigen() call mxt_check_retrigen() after mxt_acquire_irq() in mxt_initialize() replace white-spaces with tab for MXT_COMMS_RETRIGEN Changed to check if IRQ is level type] Signed-off-by: Jiada Wang <jiada_wang@mentor.com> Link: https://lore.kernel.org/r/20200727151637.23810-1-jiada_wang@mentor.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-07-22Input: ati_remote2 - add missing newlines when printing module parametersXiongfeng Wang1-2/+2
When I cat some module parameters by sysfs, it displays as follows. It's better to add a newline for easy reading. root@syzkaller:~# cat /sys/module/ati_remote2/parameters/mode_mask 0x1froot@syzkaller:~# cat /sys/module/ati_remote2/parameters/channel_mask 0xffffroot@syzkaller:~# Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com> Link: https://lore.kernel.org/r/20200720092148.9320-1-wangxiongfeng2@huawei.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-07-22Input: psmouse - add a newline when printing 'proto' by sysfsXiongfeng Wang1-1/+1
When I cat parameter 'proto' by sysfs, it displays as follows. It's better to add a newline for easy reading. root@syzkaller:~# cat /sys/module/psmouse/parameters/proto autoroot@syzkaller:~# Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com> Link: https://lore.kernel.org/r/20200720073846.120724-1-wangxiongfeng2@huawei.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-07-22Merge branch 'for-linus' into nextDmitry Torokhov5-5/+14
Sync up with 'for-linus' branch to resolve conflict in Elan touchpad driver.
2020-07-22Merge branch 'elan-i2c' into nextDmitry Torokhov10-134/+631
Bring in update to Elan touchpad driver to support newer touchpads with higher resolution.
2020-07-21Input: elan_i2c - add support for high resolution reportsJingle Wu4-59/+126
Newer controllers (identified as "pattern" version 2) send higher resolution reports, with 16-bit X and Y coordinates (previous generations used 12-bit values). These new high resolution reports use report ID of 0x60. SMbus controllers use the same buffer size for both the new and old reports, and because of that high resolution reports no longer carry area of contact data with SMbus. Signed-off-by: Jingle Wu <jingle.wu@emc.com.tw> Link: https://lore.kernel.org/r/20200710054116.5529-1-jingle.wu@emc.com.tw Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-07-21Input: elan_i2c - do not constantly re-query pattern IDDmitry Torokhov4-35/+23
We do not need to constantly re-query pattern ID, we can instead query it once and then pass to methods that need it. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-07-20Merge 5.8-rc6 into staging-nextGreg Kroah-Hartman4-5/+13
We need the staging fixes in here, and it resolves a merge issue with an iio driver. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-18Input: elan_i2c - add firmware update info for ICs 0x11, 0x13, 0x14Jingle Wu1-1/+13
This adds firmware size and page sizes for ic types 0x11, 0x13 and 0x14. IC 0x14 uses 512-byte firmware page size. Signed-off-by: Jingle Wu <jingle.wu@emc.com.tw>. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-07-18Input: elan_i2c - handle firmware updated on newer ICsJingle Wu4-7/+60
Newer ICs with IC type value starting with 0x0D and newer bootloader code use 128-byte firmware pages. Their bootloader also needs to be switched to proper mode before executing firmware update. Signed-off-by: Jingle Wu <jingle.wu@emc.com.tw> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-07-18Input: elan_i2c - add support for different firmware page sizesJingle Wu4-25/+41
Prepare driver for devices that use different sizes of firmware pages. Signed-off-by: Jingle Wu <jingle.wu@emc.com.tw> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-07-18Input: elan_i2c - fix detecting IAP version on older controllersJingle Wu1-4/+10
Older controllers in bootloader mode need a different command to retrieve the IAP version. Signed-off-by: Jingle Wu <jingle.wu@emc.com.tw> Link: https://lore.kernel.org/r/20200714105641.15151-1-jingle.wu@emc.com.tw Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-07-18Input: elan_i2c - handle devices with patterns above 1Jingle Wu1-2/+2
Extend fetching and parsing parameters of the controllers to devices with "patterns" above 1 (which currently should be handled in the same fashion as devices with pattern 1). Signed-off-by: Jingle Wu <jingle.wu@emc.com.tw> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-07-18Input: elan_i2c - make fetching IC type of older controllers more robustJingle Wu2-8/+10
On older controllers IC type is reported in the 2nd byte of ETP_I2C_OSM_VERSION_CMD, however if controller's firmware is not flashed correctly it may return incorrect data. Fortunately there is also ETP_I2C_IAP_VERSION_P0_CMD command that can be used when controller in either normal or IAP mode, and which is guaranteed to return accurate data, so let's use it. Signed-off-by: Jingle Wu <jingle.wu@emc.com.tw> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-07-18Input: elan_i2c - handle firmware not implementing "get pattern" commandJingle Wu1-1/+7
Not all versions of firmware implement "get pattern" command. When encountering those assume that the controllers use older pattern. Signed-off-by: Jingle Wu <jingle.wu@emc.com.tw> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
generated by cgit v1.2.3 (git 2.39.0) at 2026-05-10 12:53:34 +0300