summaryrefslogtreecommitdiff
path: root/drivers/input
AgeCommit message (Collapse)AuthorFilesLines
2015-08-08Input: elants_i2c - enable asynchronous probingDmitry Torokhov1-0/+1
It takes a bit of time to go through controller power up sequence and initialization. To not stall the overall boot progress let's probe the controller asynchronously, given that userspace is usually prepared for hot-plugging of input devices and thus does not rely on particular ordering. Signed-off-by: Dmitry Torokhov <dtor@chromium.org> Reviewed-by: Benson Leung <bleung@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-08-08Input: elants_i2c - wire up regulator supportDmitry Torokhov1-22/+162
Elan touchscreen controllers use two power supplies, vcc33 and vccio, and we need to enable them before trying to access the device. On X86 firmware usually does this, but on ARM it is usually left to the kernel. Signed-off-by: Dmitry Torokhov <dtor@chromium.org> Reviewed-by: Benson Leung <bleung@chromium.org> Reviewed-by: Scott Liu <scott.liu@emc.com.tw> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-08-08Input: do not emit unneeded EV_SYN when suspendingDmitry Torokhov1-2/+8
Do not emit EV_SYN/SYN_REPORT on suspend if there were no keys that are still pressed as we are suspending the device (and in all other cases when input core is forcibly releasing keys via input_dev_release_keys() call). Reviewed-by: Benson Leung <bleung@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-08-05Input: elants_i2c - disable idle mode before updating firmwareJames Chen1-1/+7
If the device is in idle mode and is in the middle of a scan it may not have a chance to react to the reset and then IAP commands within required time interval and firmware update may fail. Let's bring the device out of idle mode before attempting to reset it so that the scan period is smaller and thus it can react to the command quicker. Signed-off-by: James Chen <james.chen@emc.com.tw> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-08-05Input: atmel_mxt_ts - remove warning on zero T44 countNick Dyer1-9/+8
Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-08-05Input: atmel_mxt_ts - initialise input slots with INPUT_MT_DIRECTNick Dyer1-0/+2
This indicates the device coordinates should be directly mapped to screen. This is valid since scaling/flipping/rotation should be done by configuring the MXT device. It also flags to Android using INPUT_PROP_DIRECT that the device should be treated as a touch screen by default, and removes the necessity for a default IDC file. Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-08-05Input: atmel_mxt_ts - disable interrupt for 50ms after resetNick Dyer1-1/+8
The CHG/interrupt line is momentarily set (approximately 100 ms) as an input after power-up or reset for diagnostic purposes. This may cause spurious interrupts, so disable interrupt handler during this period. Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-08-05Input: atmel_mxt_ts - improve device tree parsingNick Dyer1-13/+9
Use function rather than loop, define np to reduce wrapping. Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-08-05Input: atmel_mxt_ts - suspend/resume causes panic if input_dev fails to initPan Xinhui1-0/+6
input_dev may be NULL if mxt_initialize_input_device fails. But pm ops is still available and suspend/resume assume input_dev is not NULL. To fix this issue, we add a check if (!input_dev). Signed-off-by: Pan Xinhui <xinhuix.pan@intel.com> Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-08-05Input: atmel_mxt_ts - remove unused definesNick Dyer1-65/+1
Many of these values are out of date and they aren't used in the driver - all they do is increase the size of the kernel source. Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-08-05Input: atmel_mxt_ts - use deep sleep mode when stoppedNick Dyer1-11/+108
The hardcoded 0x83 CTRL setting overrides other settings in that byte, enabling extra reporting that may not be useful on a particular platform. Implement improved suspend mechanism via deep sleep. By writing zero to both the active and idle cycle times the maXTouch device can be put into a deep sleep mode, using minimal power. It is necessary to issue a calibrate command after the chip has spent any time in deep sleep, however a soft reset is unnecessary. Use the old method on Chromebook Pixel via platform data option. This patch also deals with the situation where the power configuration is zero on probe, which would mean that the device never wakes up to execute commands. After a config download, the T7 power configuration may have changed so it is necessary to re-read it. Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Acked-by: Benson Leung <bleung@chromium.org> Acked-by: Yufeng Shen <miletus@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-08-04Input: Allow compile test of GPIO consumers if !GPIOLIBGeert Uytterhoeven4-12/+13
The GPIO subsystem provides dummy GPIO consumer functions if GPIOLIB is not enabled. Hence drivers that depend on GPIOLIB, but use GPIO consumer functionality only, can still be compiled if GPIOLIB is not enabled. Relax the dependency on GPIOLIB if COMPILE_TEST is enabled, where appropriate. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-08-04Input: zforce - make the interrupt GPIO optionalDirk Behme1-14/+49
Add support for hardware which uses an I2C Serializer / Deserializer (SerDes) to communicate with the zFroce touch driver. In this case the SerDes will be configured as an interrupt controller and the zForce driver will have no access to poll the GPIO line. To support this, we add two dedicated new GPIOs in the device tree: reset-gpios and irq-gpios, with the irq-gpios being optional. To not break the existing device trees, the index based 'gpios' entries are still supported, but marked as deprecated. With this, if the interrupt GPIO is available, either via the old or new device tree style, the while loop will read and handle the packets as long as the GPIO indicates that the interrupt is asserted (existing, unchanged driver behavior). If the interrupt GPIO isn't available, i.e. not configured via the new device tree style, we are falling back to one read per ISR invocation (new behavior to support the SerDes). Note that the gpiod functions help to handle the optional GPIO: devm_gpiod_get_index_optional() will return NULL in case the interrupt GPIO isn't available. And gpiod_get_value_cansleep() does cover this, too, by returning 0 in this case. Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com> Reviewed-by: Heiko Stuebner <heiko.stuebner@bq.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-07-30Input: cyapa - do not try to enable proximity reporting on older devicesDudley Du1-4/+7
Avoid the driver generate warning message when the cyapa driver working with the old Gen5 trackpad device which does not support the proximity function. Those old Gen5 trackpad device all have the platform version less than 2. Signed-off-by: Dudley Du <dudl@cypress.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-07-30Input: cyapa - introduce device tree bindingDudley Du1-0/+10
Add device tree support for Cypress trackpad devices. Signed-off-by: Dudley Du <dudl@cypress.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-07-30Input: cyapa - add regulator vcc supportDudley Du2-0/+30
We need to power up the chip before we can initialize it. On systems that delegate task of powering up regulators to firmware we assume that we'll be simply given a dummy regulator. Signed-off-by: Dudley Du <dudl@cypress.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-07-30Input: touchscreen - export OF module alias informationJavier Martinez Canillas2-0/+2
The I2C core always reports the MODALIAS uevent as "i2c:<client name" regardless if the driver was matched using the I2C id_table or the of_match_table. So technically there's no need for a driver to export the OF table since currently it's not used. In fact, the I2C device ID table is mandatory for I2C drivers since a i2c_device_id is passed to the driver's probe function even if the I2C core used the OF table to match the driver. And since the I2C core uses different tables, OF-only drivers needs to have duplicated data that has to be kept in sync and also the dev node compatible manufacturer prefix is stripped when reporting the MODALIAS. To avoid the above, the I2C core behavior may be changed in the future to not require an I2C device table for OF-only drivers and report the OF module alias. So, it's better to also export the OF table to prevent breaking module autoloading if that happens. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-07-30Input: export I2C module alias information in missing driversJavier Martinez Canillas2-0/+2
The I2C core always reports the MODALIAS uevent as "i2c:<client name" regardless if the driver was matched using the I2C id_table or the of_match_table. So the driver needs to export the I2C table and this be built into the module or udev won't have the necessary information to auto load the correct module when the device is added. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-07-28Input: tsc2005 - convert to gpiodSebastian Reichel1-29/+18
The GPIOD API can be used from boardcode, so that the DT check can be removed. To avoid breaking existing boardcode, _optional() variant has been chosen. For completely removing the DT check, the regulator has also been made optional, so that it could be supplied from boardcode. As a side-effect the patch fixes the after-probe reset GPIO state, so that the device is not kept in reset state. Signed-off-by: Sebastian Reichel <sre@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-07-28Input: tsc2005 - simplify drvdata acquisitionSebastian Reichel1-10/+6
Using dev_*_drvdata() instead of spi_*_drvdata() reduces lines of code and prepares the driver for possible tsc2004 support, which is i2c based. Signed-off-by: Sebastian Reichel <sre@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-07-28Input: tsc2005 - convert to regmapSebastian Reichel2-112/+60
Convert driver so that it uses regmap instead of directly using spi_transfer for all register accesses. Signed-off-by: Sebastian Reichel <sre@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-07-28Input: tsc2005 - fix Kconfig indentationSebastian Reichel1-4/+4
Replace spaces with tab, so that the tsc2005 Kconfig entry matches the other entries in drivers/input/touchscreen/Kconfig. Signed-off-by: Sebastian Reichel <sre@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-07-28Input: tsc2005 - improve readability of register definesSebastian Reichel1-10/+18
Improve defines for first control byte by removing 0x00 prefix (the defines are for 8 bit values and not for 16 bit values) and expose register structure by exposing the shift. Signed-off-by: Sebastian Reichel <sre@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-07-24Input: arizona-haptic - convert to use managed input devicesDmitry Torokhov1-22/+4
Using managed input device (via devm_input_allocate_device) simplifies error handling and driver removal paths and also silences CID# 712569. Reviewed-by: Joshua Clayton <stillcompiling@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-07-24Input: cyapa - add ACPI HID CYAP0002 for Gen6 devicesDudley Du1-0/+1
Add CYTP0002 to the list of ACPI HIDs recognized by the driver. Signed-off-by: Dudley Du <dudl@cypress.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-07-24Input: cyapa - fully support runtime suspend power managementDudley Du5-34/+70
Fix the the runtime suspend power management not working issue when system starts up and before user touches the trackpad device. TEST=test on Chromebook. Signed-off-by: Dudley Du <dudl@cypress.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-07-24Input: cyapa - add proximity support for gen5 and gen6 modulesDudley Du5-2/+101
Gen5 and Gen6 trackpad devices are able to detect and report object proximity data/events, add this function support in the cyapa driver through the ABS_DISTANCE event. Signed-off-by: Dudley Du <dudl@cypress.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-07-24Input: cyapa - add gen6 device module supportDudley Du5-4/+834
Based on the cyapa core, add support for basic functionality of the gen6 trackpad devices. The driver can automatically determine what protocol (gen3, gen5, or gen6) should be used with the attached trackpad device. Signed-off-by: Dudley Du <dudl@cypress.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-07-24Input: cyapa - rename 'gen5' to 'pip' for chared codeDudley Du4-604/+673
Change 'gen5' to 'pip' for all macros, variables and functions that are shared between gen5 and gen6 modules to make naming more clear and readable. Also fix a few spelling errors. Signed-off-by: Dudley Du <dudl@cypress.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-07-24Input: tc3589x-keypad - switch to using managed resourcesHimangi Saraogi1-38/+20
Let's switch the driver to use managed resources, this will simplify error handling and driver unbinding logic. Signed-off-by: Himangi Saraogi <himangi774@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-07-24Input: tc3589x-keypad - change name of wakeup propertyDmitry Torokhov1-1/+4
Wakeup property of device is not Linux-specific, it describes intended system behavior regardless of the OS being used. Therefore let's drop "linux," prefix, and, while at it, use the same name as I2C bus does: "wakeup-source". We keep parsing old name to keep compatibility with old DTSes. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-07-24Input: samsung-keypad - change name of wakeup propertyDmitry Torokhov1-2/+4
Wakeup property of device is not Linux-specific, it describes intended system behavior regardless of the OS being used. Therefore let's drop "linux," prefix, and, while at it, use the same name as I2C bus does: "wakeup-source". We keep parsing old name to keep compatibility with old DTSes. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-07-24Input: gpio_keys[_polled] - change name of wakeup propertyDmitry Torokhov2-2/+7
Wakeup property of device is not Linux-specific, it describes intended system behavior regardless of the OS being used. Therefore let's drop "linux," prefix, and, while at it, use the same name as I2C bus does: "wakeup-source". We keep parsing old name to keep compatibility with old DTSes. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-07-24Input: pmic8xxx-keypad - change name of wakeup propertyDmitry Torokhov1-4/+6
Wakeup property of device is not Linux-specific, it describes intended system behavior regardless of the OS being used. Therefore let's drop "linux," prefix, and, while at it, use the same name as I2C bus does: "wakeup-source". We keep parsing old name to keep compatibility with old DTSes. Acked-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-07-24Input: ads7846 - change name of wakeup property to "wakeup-source"Dmitry Torokhov1-1/+2
Wakeup property of device is not Linux-specific, it describes intended system behavior regardless of the OS being used. Therefore let's drop "linux," prefix, and, while at it, use the same name as I2C bus does: "wakeup-source". We keep parsing old name to keep compatibility with old DTSes. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-07-24Input: matrix_keypad - change name of wakeup property to "wakeup-source"Dmitry Torokhov1-2/+4
Wakeup property of device is not Linux-specific, it describes intended system behavior regardless of the OS being used. Therefore let's drop "linux," prefix, and, while at it, use the same name as I2C bus does: "wakeup-source". We keep parsing old name to keep compatibility with old DTSes. Cc: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-07-24Input: pmic8xxx-pwrkey - support shutdownStephen Boyd1-2/+266
On pm8xxx PMICs, shutdown and restart are signaled to the PMIC via a pin called PS_HOLD. When this pin goes low, the PMIC performs a configurable power sequence. Add a .shutdown hook so that we can properly configure this power sequence for shutdown or restart depending on the system state. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-07-20Merge tag 'v4.2-rc3' into nextDmitry Torokhov19-60/+643
Sync up with Linux 4.2-rc3 to bring in infrastructure (OF) pieces.
2015-07-20Input: elan_i2c - enable ELAN0600 acpi panelsBenjamin Tissoires1-0/+1
ELAN0600 seems to work just fine in mouse emulation mode through i2c-hid, but to have full raw touch support we need to register it in elan_i2c.ko Reported-and-tested-by: Alessio Treglia <alessio@debian.org> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Jiri Kosina <jkosina@suse.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-07-20Input: zforce - don't invert the interrupt GPIODirk Behme1-1/+1
Commit 2d53809594af ("Input: zforce_ts - convert to use the gpiod interface") converted this driver to use the gpiod functions. These functions take the active low property into account, so we don't have to invert the result of gpiod_get_value_cansleep(). This has been missed in that commit. Fix it. Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-07-18Input: drop owner assignment from i2c_driverKrzysztof Kozlowski42-42/+0
i2c_driver does not need to set an owner because i2c_register_driver() will set it. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-07-16Input: ambakmi - fix system PM by converting to modern callbacksUlf Hansson1-3/+5
The legacy system PM support has long time ago been dropped from the AMBA bus. Align to that by converting to the modern system PM callbacks. Fixes: 26825cfd90f9 (ARM: 7914/1: amba: Drop legacy PM support ...) Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-07-16Input: i8042 - add unmask_kbd_data optionStephen Chandler Paul3-7/+54
A big problem with the current i8042 debugging option is that it outputs data going to and from the keyboard by default. As a result, many dmesg logs uploaded by users will unintentionally contain sensitive information such as their password, as such it's probably a good idea not to output data coming from the keyboard unless specifically enabled by the user. Signed-off-by: Stephen Chandler Paul <cpaul@redhat.com> Reviewed-by: Andreas Mohr <andim2@users.sf.net> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-07-12Input: wdt87xx_i2c - change the sleep time to 2500ms after the sw resetHungNien Chen1-1/+2
The original wait time was 200ms which was enough for the firmware to finish loading and boot. After that the firmware will perform initialization and touch calibration, which will take about 1.1 second. The touch calibration will change controller frequency to scan at the most optimal frequency and during calibration/frequency switching process we may run into i2c data errors. To avoid them we extend the sleep to 2500ms after issuing the sw reset. Signed-off-by: HungNien Chen <hn.chen@weidahitech.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-07-12Input: wdt87xx_i2c - populate vendor and product in input deviceHungNien Chen1-1/+45
These attributes can be used to identify controllers present in the system. Signed-off-by: HungNien Chen <hn.chen@weidahitech.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-07-12Input: pixcir_i2c_ts - use standard OF touchscreen parsing codeDmitry Torokhov1-51/+44
Let's switch to using standard touchscreen device properties parsing module instead of doing it by hand in the driver. Acked-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-07-12Input: pixcir_i2c_ts - simplify input device initializationDmitry Torokhov1-5/+0
input_mt_init_slots() will perform necessary settings for performing multi-touch to single-touch emulation, we do not need to do that ourselves. Acked-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-07-12Input: pixcir_i2c_ts - add RESET gpioRoger Quadros1-0/+22
The controller has a RESET pin which is usually controlled over a GPIO line. If such a GPIO is provided, perform a RESET during probe. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-07-12Input: pixcir_i2c_ts - allow using with GPIO expandersDmitry Torokhov1-1/+1
We are using threaded interrupt handler and thus are allowed to sleep. Let's switch over to gpiod_get_value_cansleep() so that we do not get ugly warnings in case GPIO controller might sleep when accessing GPIO. Acked-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-07-12Input: pixcir_i2c_ts - switch the device over to gpiodDmitry Torokhov1-17/+9
This allows uniform parsing on legacy, DT and ACPI systems. Acked-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-25 23:28:41 +0300