summaryrefslogtreecommitdiff
path: root/drivers/input
AgeCommit message (Collapse)AuthorFilesLines
2013-10-31Merge branch 'for-linus' of ↵Linus Torvalds7-20/+51
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: "A bit later than I would want, but the changes are very minor - a few new device IDs for new hardware in existing drivers, fix for battery in Wacom devices not be considered system battery and cause emergency hibernations, and a couple of other bug fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: ALPS - add support for model found on Dell XT2 Input: wacom - add support for ISDv4 0x10E sensor Input: wacom - add support for ISDv4 0x10F sensor Input: wacom - export battery scope Input: cm109 - convert high volume dev_err() to dev_err_ratelimited() Input: move name/timer init to input_alloc_dev() Input: i8042 - i8042_flush fix for a full 8042 buffer Input: pxa27x_keypad - fix NULL pointer dereference
2013-10-31Input: ALPS - add support for model found on Dell XT2Yunkang Tang1-0/+1
This patch adds support for touchpad found on Dell XT2. It's a dual device with device ID: 73, 00, 14, that comply with "ALPS_PROTO_V2". Signed-off-by: Yunkang Tang <yunkang.tang@cn.alps.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-10-23Input: wacom - add support for ISDv4 0x10E sensorJason Gerecke1-0/+4
Used in the Fujitsu T732 Signed-off-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-10-23Input: wacom - add support for ISDv4 0x10F sensorJason Gerecke1-0/+4
Signed-off-by: Jason Gerecke <killertofu@gmail.com> Tested-by: Filip Zarnecki <Filip.Zarnecki@fuw.edu.pl> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-10-16Input: wacom - export battery scopeBastien Nocera1-0/+4
This will stop UPower from detecting the tablet as a power supply, and using its battery status to hibernate or switch off the machine. https://bugs.freedesktop.org/show_bug.cgi?id=70321 Signed-off-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-10-06Input: cm109 - convert high volume dev_err() to dev_err_ratelimited()Tim Gardner1-4/+10
BugLink: http://bugs.launchpad.net/bugs/1222850 This input device can get into a state that produces a high volume of device status errors. Attempt to throttle these error messages such that the kernel log is not flooded. Signed-off-by: Tim Gardner <tim.gardner@canonical.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-10-06Input: move name/timer init to input_alloc_dev()David Herrmann1-5/+5
We want to allow drivers to call input_event() at any time after the device got allocated. This means input_event() and input_register_device() must be allowed to run in parallel. The only conflicting calls in input_register_device() are init_timer() and dev_set_name(). Both can safely be moved to device allocation and we're good to go. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-09-18Input: i8042 - i8042_flush fix for a full 8042 bufferAndrey Moiseev1-9/+14
When 8042 internal data buffer is full, the driver erroneously decides that the controller is not present. i8042_flush returns the number of flushed bytes, which is in 0 - I8042_BUFFER_SIZE range inclusive. Therefore, i8042_flush has no way to indicate an error. Moreover i8042_controller_check takes initially full buffer (i8042_flush returned I8042_BUFFER_SIZE) as a sign of absence of the controller. Let's change i8042 to return success/error instead and make sure we do not return error prematurely. Signed-off-by: Andrey Moiseev <o2g.org.ru@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-09-18Input: pxa27x_keypad - fix NULL pointer dereferenceMike Dunn1-2/+9
A NULL pointer dereference exception occurs in the driver probe function when device tree is used. The pdata pointer will be NULL in this case, but the code dereferences it in all cases. When device tree is used, a platform data structure is allocated and initialized, and in all cases this pointer is copied to the driver's private data, so the variable being tested should be accessed through the driver's private data structure. Signed-off-by: Mike Dunn <mikedunn@newsguy.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-09-15Merge branch 'for-linus' of ↵Linus Torvalds1-6/+31
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input update from Dmitry Torokhov: "The only change is David Hermann's new EVIOCREVOKE evdev ioctl that allows safely passing file descriptors to input devices to session processes and later being able to stop delivery of events through these fds so that inactive sessions will no longer receive user input that does not belong to them" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: evdev - add EVIOCREVOKE ioctl
2013-09-13Remove GENERIC_HARDIRQ config optionMartin Schwidefsky3-5/+4
After the last architecture switched to generic hard irqs the config options HAVE_GENERIC_HARDIRQS & GENERIC_HARDIRQS and the related code for !CONFIG_GENERIC_HARDIRQS can be removed. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-09-07Input: evdev - add EVIOCREVOKE ioctlDavid Herrmann1-6/+31
If we have multiple sessions on a system, we normally don't want background sessions to read input events. Otherwise, it could capture passwords and more entered by the user on the foreground session. This is a real world problem as the recent XMir development showed: http://mjg59.dreamwidth.org/27327.html We currently rely on sessions to release input devices when being deactivated. This relies on trust across sessions. But that's not given on usual systems. We therefore need a way to control which processes have access to input devices. With VTs the kernel simply routed them through the active /dev/ttyX. This is not possible with evdev devices, though. Moreover, we want to avoid routing input-devices through some dispatcher-daemon in userspace (which would add some latency). This patch introduces EVIOCREVOKE. If called on an evdev fd, this revokes device-access irrecoverably for that *single* open-file. Hence, once you call EVIOCREVOKE on any dup()ed fd, all fds for that open-file will be rather useless now (but still valid compared to close()!). This allows us to pass fds directly to session-processes from a trusted source. The source keeps a dup()ed fd and revokes access once the session-process is no longer active. Compared to the EVIOCMUTE proposal, we can avoid the CAP_SYS_ADMIN restriction now as there is no way to revive the fd again. Hence, a user is free to call EVIOCREVOKE themself to kill the fd. Additionally, this ioctl allows multi-layer access-control (again compared to EVIOCMUTE which was limited to one layer via CAP_SYS_ADMIN). A middle layer can simply request a new open-file from the layer above and pass it to the layer below. Now each layer can call EVIOCREVOKE on the fds to revoke access for all layers below, at the expense of one fd per layer. There's already ongoing experimental user-space work which demonstrates how it can be used: http://lists.freedesktop.org/archives/systemd-devel/2013-August/012897.html Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-09-07Merge branch 'for-linus' of ↵Linus Torvalds27-318/+659
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: "A new driver for slidebar on Ideapad laptops and a bunch of assorted driver fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (32 commits) Input: add SYN_MAX and SYN_CNT constants Input: max11801_ts - convert to devm Input: egalax-ts - fix typo and improve text Input: MAINTAINERS - change maintainer for cyttsp driver Input: cyttsp4 - kill 'defined but not used' compiler warnings Input: add driver for slidebar on Lenovo IdeaPad laptops Input: omap-keypad - set up irq type from DT Input: omap-keypad - enable wakeup capability for keypad. Input: omap-keypad - clear interrupts on open Input: omap-keypad - convert to threaded IRQ Input: omap-keypad - use bitfiled instead of hardcoded values Input: cyttsp4 - remove useless NULL test from cyttsp4_watchdog_timer() Input: wacom - fix error return code in wacom_probe() Input: as5011 - fix error return code in as5011_probe() Input: keyboard, serio - simplify use of devm_ioremap_resource Input: tegra-kbc - simplify use of devm_ioremap_resource Input: htcpen - fix incorrect placement of __initdata Input: qt1070 - add power management ops Input: wistron_btns - add MODULE_DEVICE_TABLE Input: wistron_btns - mark the Medion MD96500 keymap as tested ...
2013-09-07Merge branch 'next' into for-linusDmitry Torokhov27-318/+659
Merge first round of changes for 3.12 merge window.
2013-09-07Merge tag 'dt-for-linus' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC DT updates from Olof Johansson: "Device tree and bindings updates for 3.12. General additions of various on-chip and on-board peripherals on various platforms as support gets added. Some of the bigger changes are: - Addition of (new) PCI-e support on Tegra. - More Tegra4 support, including PMC configuration for Dalmore. - Addition of a new board for Exynos4 (trats2) and more bindings for 4x12 IP. - Addition of Allwinner A20 and A31 SoC and board files. - Move of the ST Ericsson device tree files to now use ste-* prefix. - More move of hardware description of shmobile platforms to DT. - Two new board dts files for Freescale MXs" * tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (177 commits) dts: Rename DW APB timer compatible strings dts: Deprecate ALTR as a vendor prefix of: add vendor prefix for Altera Corp. ARM: at91/dt: sam9x5ek: add sound configuration ARM: at91/dt: sam9x5ek: enable SSC ARM: at91/dt: sam9x5ek: add WM8731 codec ARM: at91/dt: sam9x5: add SSC DMA parameters ARM: at91/dt: add at91rm9200 PQFP package version ARM: at91: at91rm9200: set default mmc0 pinctrl-names ARM: at91: at91sam9n12: correct pin number of gpio-key ARM: at91: at91sam9n12: add qt1070 support ARM: at91: at91sam9n12: add pinctrl of TWI ARM: at91: Add PMU support for sama5d3 ARM: at91: at91sam9260: add missing pinctrl-names on mmc ARM: tegra: configure power off for Dalmore ARM: DT: binding fixup to align with vendor-prefixes.txt (DT) ARM: dts: add sdio blocks to bcm28155-ap board ARM: dts: align sdio numbers to HW definition ARM: sun7i: Add Olimex A20-Olinuxino-Micro support ARM: sun7i: Add Allwinner A20 DTSI ...
2013-09-06Merge branch 'for-linus' of ↵Linus Torvalds1-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID updates from Jiri Kosina: "Highlights: - conversion of HID subsystem to use devm-based resource management, from Benjamin Tissoires - i2c-hid support for DT bindings, from Benjamin Tissoires - much improved support for Win8-multitouch devices, from Benjamin Tissoires - cleanup of core code using common hidinput_input_event(), from David Herrmann - fix for bug in implement() access to the bit stream (causing oops) that has been present in the code for ages, but devices that are able to trigger it have started to appear only now, from Jiri Kosina - fixes for CVE-2013-2899, CVE-2013-2898, CVE-2013-2896, CVE-2013-2892, CVE-2013-2888 (all triggerable only by specially crafted malicious HW devices plugged into the system), from Kees Cook - hidraw oops fix, from Manoj Chourasia - various smaller fixes here and there, support for a bunch of new devices by various contributors" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (53 commits) HID: MAINTAINERS: add roccat drivers HID: hid-sensor-hub: change kmalloc + memcpy by kmemdup HID: hid-sensor-hub: move to devm_kzalloc HID: hid-sensor-hub: fix indentation accross the code HID: move HID_REPORT_TYPES closer to the report-definitions HID: check for NULL field when setting values HID: picolcd_core: validate output report details HID: sensor-hub: validate feature report details HID: ntrig: validate feature report details HID: pantherlord: validate output report details HID: hid-wiimote: print small buffers via %*phC HID: uhid: improve uhid example client HID: Correct the USB IDs for the new Macbook Air 6 HID: wiimote: add support for Guitar-Hero guitars HID: wiimote: add support for Guitar-Hero drums Input: introduce BTN/ABS bits for drums and guitars HID: battery: don't do DMA from stack HID: roccat: add support for KonePureOptical v2 HID: picolcd: Prevent NULL pointer dereference on _remove() HID: usbhid: quirk for N-Trig DuoSense Touch Screen ...
2013-09-04HID: Correct the USB IDs for the new Macbook Air 6Henrik Rydberg1-3/+3
A recent patch (9d9a04ee) added support for the new machine, but got the sequence of USB ids wrong. Reports from both Ian and Linus T show that the 0x0291 id is for ISO, not ANSI, which should have the missing number 0x0290. This patchs moves the three numbers accordingly, fixing the problem. Reported-and-tested-by: Ian Munsie <darkstarsword@gmail.com> Tested-by: Linus G Thiel <linus@hanssonlarsson.se> Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-09-03Merge tag 'driver-core-3.12-rc1' of ↵Linus Torvalds2-15/+18
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core patches from Greg KH: "Here's the big driver core pull request for 3.12-rc1. Lots of tiny changes here fixing up the way sysfs attributes are created, to try to make drivers simpler, and fix a whole class race conditions with creations of device attributes after the device was announced to userspace. All the various pieces are acked by the different subsystem maintainers" * tag 'driver-core-3.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (119 commits) firmware loader: fix pending_fw_head list corruption drivers/base/memory.c: introduce help macro to_memory_block dynamic debug: line queries failing due to uninitialized local variable sysfs: sysfs_create_groups returns a value. debugfs: provide debugfs_create_x64() when disabled rbd: convert bus code to use bus_groups firmware: dcdbas: use binary attribute groups sysfs: add sysfs_create/remove_groups for when SYSFS is not enabled driver core: add #include <linux/sysfs.h> to core files. HID: convert bus code to use dev_groups Input: serio: convert bus code to use drv_groups Input: gameport: convert bus code to use drv_groups driver core: firmware: use __ATTR_RW() driver core: core: use DEVICE_ATTR_RO driver core: bus: use DRIVER_ATTR_WO() driver core: create write-only attribute macros for devices and drivers sysfs: create __ATTR_WO() driver-core: platform: convert bus code to use dev_groups workqueue: convert bus code to use dev_groups MEI: convert bus code to use dev_groups ...
2013-08-31Merge branch 'for-linus' of ↵Linus Torvalds5-6/+53
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input layer updates from Dmitry Torokhov: "Just a couple of new IDs in Wacom and xpad drivers, i8042 is now disabled on ARC, and data checks in Elantech driver that were overly relaxed by the previous patch are now tightened" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: i8042 - disable the driver on ARC platforms Input: xpad - add signature for Razer Onza Classic Edition Input: elantech - fix packet check for v3 and v4 hardware Input: wacom - add support for 0x300 and 0x301
2013-08-29dts: Deprecate ALTR as a vendor prefixDinh Nguyen1-0/+1
Because most of the vendor prefixes are lower case, deprecate the vendor prefix "ALTR" in place of "altr" for Altera Corp.. Signed-off-by: Dinh Nguyen <dinguyen@altera.com> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: devicetree@vger.kernel.org Signed-off-by: Olof Johansson <olof@lixom.net>
2013-08-29Input: max11801_ts - convert to devmFabio Estevam1-28/+9
Converting to devm functions can make the code smaller and cleaner. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-08-29Input: i8042 - disable the driver on ARC platformsMischa Jonker1-1/+2
It causes crashes when enabled, and we don't have such a peripheral anyway on ARC platforms. Signed-off-by: Mischa Jonker <mjonker@synopsys.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-08-29Input: cyttsp4 - kill 'defined but not used' compiler warningsGeert Uytterhoeven1-100/+100
If both CONFIG_PM_SLEEP and CONFIG_PM_RUNTIME are unset: drivers/input/touchscreen/cyttsp4_core.c:1556: warning: ‘cyttsp4_core_sleep’ defined but not used drivers/input/touchscreen/cyttsp4_core.c:1634: warning: ‘cyttsp4_core_wake’ defined but not used Move cyttsp4_core_sleep(), cyttsp4_core_wake(), and cyttsp4_core_wake_() (which is called from cyttsp4_core_wake() only) inside the existing section protected by #if defined(CONFIG_PM_SLEEP) || defined(CONFIG_PM_RUNTIME) Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-08-26Input: add driver for slidebar on Lenovo IdeaPad laptopsAndrey Moiseev4-24/+369
This driver adds support for slidebars found on some Lenovo IdeaPad laptops (the slidebars work with SlideNav/Desktop Navigator under Windows). Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=16004 Registers 'IdeaPad Slidebar' input device and /sys/devices/platform/ideapad_slidebar/slidebar_mode for switching slidebar's modes. Now works on: IdeaPad Y550, Y550P. May work on (testing and adding new models is needed): Ideapad Y560, Y460, Y450, Y650, and, probably, some others. Signed-off-by: Andrey Moiseev <o2g.org.ru@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-08-26Input: xpad - add signature for Razer Onza Classic EditionMag1-0/+1
Signed-off-by: Nol "Mag" Archinova <magissia@magissia.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-08-26Input: omap-keypad - set up irq type from DTIllia Smyrnov1-2/+1
OMAP4 is DT only, so read the keypad IRQ type from DT instead hard-coding it in the driver. Signed-off-by: Illia Smyrnov <illia.smyrnov@ti.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-08-26Input: omap-keypad - enable wakeup capability for keypad.Illia Smyrnov1-0/+39
Enable/disable IRQ wake in suspend/resume handlers to make the keypad wakeup capable. Signed-off-by: Illia Smyrnov <illia.smyrnov@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-08-26Input: omap-keypad - clear interrupts on openIllia Smyrnov1-1/+2
According to TRM, the recommended way for keyboard controller initialization is clear the interrupt-status register, then set up certain keyboard events for generating an interrupt request and set up expected source of wake-up event that generates a wake-up request. Signed-off-by: Illia Smyrnov <illia.smyrnov@ti.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-08-26Input: omap-keypad - convert to threaded IRQIllia Smyrnov1-9/+20
Convert to use threaded IRQ. Signed-off-by: Illia Smyrnov <illia.smyrnov@ti.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-08-26Input: omap-keypad - use bitfiled instead of hardcoded valuesIllia Smyrnov1-14/+11
Use bitfiled instead of hardcoded values to set KBD_CTRL, use BIT macro, remove unused defines. Signed-off-by: Illia Smyrnov <illia.smyrnov@ti.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-08-26Input: cyttsp4 - remove useless NULL test from cyttsp4_watchdog_timer()Wei Yongjun1-3/+0
Remove useless NULL test from cyttsp4_watchdog_timer(). Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Ferruh Yigit <fery@cypress.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-08-26Input: serio: convert bus code to use drv_groupsGreg Kroah-Hartman1-10/+11
The drv_attrs field of struct bus_type is going away soon, drv_groups should be used instead. This converts the serio bus code to use the correct field. Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-26Input: gameport: convert bus code to use drv_groupsGreg Kroah-Hartman1-5/+7
The drv_attrs field of struct bus_type is going away soon, drv_groups should be used instead. This converts the gameport bus code to use the correct field. Acked: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-25Input: elantech - fix packet check for v3 and v4 hardwareMatteo Delfino2-4/+41
The signatures of v3 and v4 packets change depending on the value of a hardware flag called 'crc_enabled'. The packet type detection must change accordingly. This patch also restores a consistency check for v4 packets inadvertently removed by commit: 9eebed7de660c0b5ab129a9de4f89d20b60de68c Input: elantech - fix for newer hardware versions (v7) A note about the naming convention: v3 hardware is associated with IC body v5 while v4 hardware is associated with IC body v6 and v7. The above commit refers to IC body v7, not to v7 hardware. Tested on Samsung NP730U3E (fw = 0x675f05, ICv7, crc_enabled = 1) Tested-by: Giovanni Frigione <gio.frigione@gmail.com> Signed-off-by: Matteo Delfino <kendatsuba@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-08-25Input: wacom - add support for 0x300 and 0x301Ping Cheng1-1/+9
Tested-by: Arjuna Rao Chavala <arjunaraoc@gmail.com> Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-08-25Input: wacom - fix error return code in wacom_probe()Wei Yongjun1-3/+5
Fix to return a negative error code from the urb submit error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-08-25Input: as5011 - fix error return code in as5011_probe()Wei Yongjun1-0/+1
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-08-15Input: keyboard, serio - simplify use of devm_ioremap_resourceJulia Lawall5-27/+4
Remove unneeded error handling on the result of a call to platform_get_resource when the value is passed to devm_ioremap_resource. Move the call to platform_get_resource adjacent to the call to devm_ioremap_resource to make the connection between them more clear. A simplified version of the semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression pdev,res,n,e,e1; expression ret != 0; identifier l; @@ - res = platform_get_resource(pdev, IORESOURCE_MEM, n); ... when != res - if (res == NULL) { ... \(goto l;\|return ret;\) } ... when != res + res = platform_get_resource(pdev, IORESOURCE_MEM, n); e = devm_ioremap_resource(e1, res); // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-08-15Input: tegra-kbc - simplify use of devm_ioremap_resourceJulia Lawall1-6/+1
Remove unneeded error handling on the result of a call to platform_get_resource when the value is passed to devm_ioremap_resource. Move the call to platform_get_resource adjacent to the call to devm_ioremap_resource to make the connection between them more clear. A simplified version of the semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression pdev,res,n,e,e1; expression ret != 0; identifier l; @@ - res = platform_get_resource(pdev, IORESOURCE_MEM, n); ... when != res - if (res == NULL) { ... \(goto l;\|return ret;\) } ... when != res + res = platform_get_resource(pdev, IORESOURCE_MEM, n); e = devm_ioremap_resource(e1, res); // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-08-15Input: htcpen - fix incorrect placement of __initdataSachin Kamat1-1/+1
__initdata should be placed between the variable name and equal sign for the variable to be placed in the intended section. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: Pau Oliva Fora <pau@eslack.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-08-13Input: qt1070 - add power management opsBo Shen1-0/+27
Add power management ops for qt1070, it may be a wakeup source. Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-08-13Input: wistron_btns - add MODULE_DEVICE_TABLEStefan Lippers-Hollmann1-0/+1
This allows the wistron_btns module to be autoloaded on boot, its functionality is required to support the hardware rfkill switches on most of the supported notebooks, in order to unblock the hard blocked rfkill state for wireless and bluetooth devices. Tested on a Medion MD96500: alias: dmi*:svn*MEDIONPC*:pn*WIM2040*: Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-08-13Input: wistron_btns - mark the Medion MD96500 keymap as testedStefan Lippers-Hollmann1-1/+1
DMI: MEDIONPC WIM 2040/WIM 2040, BIOS R01-A0O 11/04/2005 wistron_btns: BIOS signature found at c00f6b00, entry point 000FDD50 input: Wistron laptop buttons as /devices/platform/wistron-bios/input/input5 Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-08-13Input: wistron_btns - drop bogus MODULE_VERSION macroStefan Lippers-Hollmann1-1/+0
MODULE_VERSION is pointless for an in-kernel module and git log confirms that it has never been actually maintained as well (bumped a single time, despite quite major feature additions later on, which haven't been reflected in MODULE_VERSION). Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-08-13Input: synaptics - fix incorrect placement of __initconstSachin Kamat1-2/+2
__initconst should be placed between the variable name and equal sign for the variable to be placed in the intended section. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-08-13Input: lifebook - fix incorrect placement of __initconstSachin Kamat1-1/+1
__initconst should be placed between the variable name and equal sign for the variable to be placed in the intended section. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-08-13Input: wistron_btns - fix incorrect placement of __initconstSachin Kamat1-1/+1
__initconst should be placed between the variable name and equal sign for the variable to be placed in the intended section. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-08-13Input: joysticks - use dev_get_platdata()Jingoo Han2-3/+3
Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-08-13Input: pwm-beeper - add CONFIG_PM_SLEEP to suspend/resumeJingoo Han1-1/+1
Add CONFIG_PM_SLEEP to suspend/resume functions to fix the build warnings when CONFIG_PM_SLEEP is not selected. This is because sleep PM callbacks defined by SET_SYSTEM_SLEEP_PM_OPS are only used when the CONFIG_PM_SLEEP is enabled. drivers/input/misc/pwm-beeper.c:147:12: warning: 'pwm_beeper_suspend' defined but not used [-Wunused-function] drivers/input/misc/pwm-beeper.c:157:12: warning: 'pwm_beeper_resume' defined but not used [-Wunused-function] Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-08-13Input: eeti_ts - add CONFIG_PM_SLEEP to suspend/resumeJingoo Han1-4/+2
Add CONFIG_PM_SLEEP to suspend/resume functions to fix the build warnings when CONFIG_PM_SLEEP is not selected. This is because sleep PM callbacks defined by SET_SYSTEM_SLEEP_PM_OPS are only used when the CONFIG_PM_SLEEP is enabled. drivers/input/touchscreen/eeti_ts.c:268:12: warning: 'eeti_ts_suspend' defined but not used [-Wunused-function] drivers/input/touchscreen/eeti_ts.c:287:12: warning: 'eeti_ts_resume' defined but not used [-Wunused-function] Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-30 11:51:59 +0300