summaryrefslogtreecommitdiff
path: root/drivers/input/touchscreen
AgeCommit message (Collapse)AuthorFilesLines
2022-12-12Merge branch 'next' into for-linusDmitry Torokhov50-199/+2111
Prepare input updates for 6.2 merge window.
2022-12-09Input: elants_i2c - delay longer with reset assertedDouglas Anderson1-2/+2
The elan touchscreen datasheet says that the reset GPIO only needs to be asserted for 500us in order to reset the regulator. The problem is that some boards need a level shifter between the signals on the GPIO controller and the signals on the touchscreen. All of these extra components on the line can slow the transition of the signals. On one board, we measured the reset line and saw that it took almost 1.8ms to go low. Even after we bumped up the "drive strength" of the signal from the default 2mA to 8mA we still saw it take 421us for the signal to go low. In order to account for this let's lengthen the amount of time that we keep the reset asserted. Let's bump it up from 500us to 5000us. That's still a relatively short amount of time and is much safer. It should be noted that this fixes real problems. Case in point: 1. The touchscreen power rail may be shared with another device (like an eDP panel). That means that at probe time power might already be on. 2. In probe we grab the reset GPIO and assert it (make it low). 3. We turn on power (a noop since it was already on). 4. We wait 500us. 5. We deassert the reset GPIO. With the above case and only a 500us delay we saw only a partial reset asserted, which is bad. Giving it 5ms is overkill but feels safer in case someone else has a different level shifter setup. Note that bumping up the delay to 5000 means that some configs yell about using udelay(). We'll change to using usleep_range(). We give a small range here because: - This isn't a delay that happens very often so we don't need to worry about giving a big range to allow for power efficiency. - usleep_range() is known to almost always pick the upper bound and delay that long and we really don't want to slow down the power on of the touchscreen that much. Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Link: https://lore.kernel.org/r/20221208180603.v2.5.I6edfb3f459662c041563a54e5b7df727c27caaba@changeid Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-12-03Input: raydium_ts_i2c - fix memory leak in raydium_i2c_send()Zhang Xiaoxu1-1/+3
There is a kmemleak when test the raydium_i2c_ts with bpf mock device: unreferenced object 0xffff88812d3675a0 (size 8): comm "python3", pid 349, jiffies 4294741067 (age 95.695s) hex dump (first 8 bytes): 11 0e 10 c0 01 00 04 00 ........ backtrace: [<0000000068427125>] __kmalloc+0x46/0x1b0 [<0000000090180f91>] raydium_i2c_send+0xd4/0x2bf [raydium_i2c_ts] [<000000006e631aee>] raydium_i2c_initialize.cold+0xbc/0x3e4 [raydium_i2c_ts] [<00000000dc6fcf38>] raydium_i2c_probe+0x3cd/0x6bc [raydium_i2c_ts] [<00000000a310de16>] i2c_device_probe+0x651/0x680 [<00000000f5a96bf3>] really_probe+0x17c/0x3f0 [<00000000096ba499>] __driver_probe_device+0xe3/0x170 [<00000000c5acb4d9>] driver_probe_device+0x49/0x120 [<00000000264fe082>] __device_attach_driver+0xf7/0x150 [<00000000f919423c>] bus_for_each_drv+0x114/0x180 [<00000000e067feca>] __device_attach+0x1e5/0x2d0 [<0000000054301fc2>] bus_probe_device+0x126/0x140 [<00000000aad93b22>] device_add+0x810/0x1130 [<00000000c086a53f>] i2c_new_client_device+0x352/0x4e0 [<000000003c2c248c>] of_i2c_register_device+0xf1/0x110 [<00000000ffec4177>] of_i2c_notify+0x100/0x160 unreferenced object 0xffff88812d3675c8 (size 8): comm "python3", pid 349, jiffies 4294741070 (age 95.692s) hex dump (first 8 bytes): 22 00 36 2d 81 88 ff ff ".6-.... backtrace: [<0000000068427125>] __kmalloc+0x46/0x1b0 [<0000000090180f91>] raydium_i2c_send+0xd4/0x2bf [raydium_i2c_ts] [<000000001d5c9620>] raydium_i2c_initialize.cold+0x223/0x3e4 [raydium_i2c_ts] [<00000000dc6fcf38>] raydium_i2c_probe+0x3cd/0x6bc [raydium_i2c_ts] [<00000000a310de16>] i2c_device_probe+0x651/0x680 [<00000000f5a96bf3>] really_probe+0x17c/0x3f0 [<00000000096ba499>] __driver_probe_device+0xe3/0x170 [<00000000c5acb4d9>] driver_probe_device+0x49/0x120 [<00000000264fe082>] __device_attach_driver+0xf7/0x150 [<00000000f919423c>] bus_for_each_drv+0x114/0x180 [<00000000e067feca>] __device_attach+0x1e5/0x2d0 [<0000000054301fc2>] bus_probe_device+0x126/0x140 [<00000000aad93b22>] device_add+0x810/0x1130 [<00000000c086a53f>] i2c_new_client_device+0x352/0x4e0 [<000000003c2c248c>] of_i2c_register_device+0xf1/0x110 [<00000000ffec4177>] of_i2c_notify+0x100/0x160 After BANK_SWITCH command from i2c BUS, no matter success or error happened, the tx_buf should be freed. Fixes: 3b384bd6c3f2 ("Input: raydium_ts_i2c - do not split tx transactions") Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com> Link: https://lore.kernel.org/r/20221202103412.2120169-1-zhangxiaoxu5@huawei.com Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-12-03Input: zforce_ts - Convert to i2c's .probe_new()Uwe Kleine-König1-3/+2
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20221118224540.619276-268-uwe@kleine-koenig.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-12-03Input: zet6223 - Convert to i2c's .probe_new()Uwe Kleine-König1-3/+2
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20221118224540.619276-267-uwe@kleine-koenig.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-12-03Input: wdt87xx_i2c - Convert to i2c's .probe_new()Uwe Kleine-König1-3/+2
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20221118224540.619276-266-uwe@kleine-koenig.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-12-03Input: wacom_i2c - Convert to i2c's .probe_new()Uwe Kleine-König1-3/+2
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Alistair Francis <alistair@alistair23.me> Link: https://lore.kernel.org/r/20221118224540.619276-265-uwe@kleine-koenig.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-12-03Input: tsc2007_core - Convert to i2c's .probe_new()Uwe Kleine-König1-3/+3
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20221118224540.619276-264-uwe@kleine-koenig.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-12-03Input: tsc2004 - Convert to i2c's .probe_new()Uwe Kleine-König1-3/+2
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20221118224540.619276-263-uwe@kleine-koenig.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-12-03Input: sx8654 - Convert to i2c's .probe_new()Uwe Kleine-König1-3/+3
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20221118224540.619276-262-uwe@kleine-koenig.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-12-03Input: stmfts - Convert to i2c's .probe_new()Uwe Kleine-König1-3/+2
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20221118224540.619276-261-uwe@kleine-koenig.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-12-03Input: st1232 - Convert to i2c's .probe_new()Uwe Kleine-König1-3/+3
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20221118224540.619276-260-uwe@kleine-koenig.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-12-03Input: sis_i2c - Convert to i2c's .probe_new()Uwe Kleine-König1-3/+2
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20221118224540.619276-259-uwe@kleine-koenig.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-12-03Input: silead - Convert to i2c's .probe_new()Uwe Kleine-König1-3/+3
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20221118224540.619276-258-uwe@kleine-koenig.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-12-03Input: s6sy761 - Convert to i2c's .probe_new()Uwe Kleine-König1-3/+2
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20221118224540.619276-257-uwe@kleine-koenig.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-12-03Input: rohm_bu21023 - Convert to i2c's .probe_new()Uwe Kleine-König1-3/+2
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20221118224540.619276-256-uwe@kleine-koenig.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-12-03Input: raydium_i2c_ts - Convert to i2c's .probe_new()Uwe Kleine-König1-3/+2
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20221118224540.619276-255-uwe@kleine-koenig.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-12-03Input: pixcir_i2c_ts - Convert to i2c's .probe_new()Uwe Kleine-König1-3/+3
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20221118224540.619276-254-uwe@kleine-koenig.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-12-03Input: mms114 - Convert to i2c's .probe_new()Uwe Kleine-König1-3/+2
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20221118224540.619276-253-uwe@kleine-koenig.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-12-03Input: migor_ts - Convert to i2c's .probe_new()Uwe Kleine-König1-3/+2
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20221118224540.619276-252-uwe@kleine-koenig.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-12-03Input: melfas_mip4 - Convert to i2c's .probe_new()Uwe Kleine-König1-2/+2
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20221118224540.619276-251-uwe@kleine-koenig.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-12-03Input: mcs5000_ts - Convert to i2c's .probe_new()Uwe Kleine-König1-3/+2
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20221118224540.619276-250-uwe@kleine-koenig.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-12-03Input: max11801_ts - Convert to i2c's .probe_new()Uwe Kleine-König1-3/+2
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20221118224540.619276-249-uwe@kleine-koenig.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-12-03Input: iqs5xx - Convert to i2c's .probe_new()Uwe Kleine-König1-3/+2
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Jeff LaBundy <jeff@labundy.com> Link: https://lore.kernel.org/r/20221118224540.619276-248-uwe@kleine-koenig.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-12-03Input: ilitek_ts_i2c - Convert to i2c's .probe_new()Uwe Kleine-König1-3/+2
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20221118224540.619276-247-uwe@kleine-koenig.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-12-03Input: ili210x - Convert to i2c's .probe_new()Uwe Kleine-König1-3/+3
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20221118224540.619276-246-uwe@kleine-koenig.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-12-03Input: hycon-hy46xx - Convert to i2c's .probe_new()Uwe Kleine-König1-3/+2
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20221118224540.619276-245-uwe@kleine-koenig.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-12-03Input: hx83112b: Convert to i2c's .probe_new()Uwe Kleine-König1-3/+2
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20221118224540.619276-244-uwe@kleine-koenig.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-12-03Input: hideep - Convert to i2c's .probe_new()Uwe Kleine-König1-3/+2
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20221118224540.619276-243-uwe@kleine-koenig.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-12-03Input: goodix - Convert to i2c's .probe_new()Uwe Kleine-König1-3/+2
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20221118224540.619276-242-uwe@kleine-koenig.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-12-03Input: ektf2127 - Convert to i2c's .probe_new()Uwe Kleine-König1-3/+2
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20221118224540.619276-241-uwe@kleine-koenig.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-12-03Input: egalax_ts - Convert to i2c's .probe_new()Uwe Kleine-König1-3/+2
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20221118224540.619276-240-uwe@kleine-koenig.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-12-03Input: eeti_ts - Convert to i2c's .probe_new()Uwe Kleine-König1-3/+2
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20221118224540.619276-239-uwe@kleine-koenig.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-12-03Input: edt-ft5x06 - Convert to i2c's .probe_new()Uwe Kleine-König1-3/+3
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Oliver Graute <oliver.graute@kococonnector.com> Link: https://lore.kernel.org/r/20221118224540.619276-238-uwe@kleine-koenig.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-12-03Input: cyttsp_i2c - Convert to i2c's .probe_new()Uwe Kleine-König1-3/+2
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20221118224540.619276-237-uwe@kleine-koenig.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-12-03Input: cyttsp5: Convert to i2c's .probe_new()Uwe Kleine-König1-3/+2
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20221118224540.619276-236-uwe@kleine-koenig.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-12-03Input: cyttsp4 - Convert to i2c's .probe_new()Uwe Kleine-König1-3/+2
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20221118224540.619276-235-uwe@kleine-koenig.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-12-03Input: cy8ctmg110_ts - Convert to i2c's .probe_new()Uwe Kleine-König1-3/+2
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20221118224540.619276-234-uwe@kleine-koenig.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-12-03Input: cy8ctma140 - Convert to i2c's .probe_new()Uwe Kleine-König1-3/+2
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20221118224540.619276-233-uwe@kleine-koenig.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-12-03Input: chipone_icn8318 - Convert to i2c's .probe_new()Uwe Kleine-König1-3/+2
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20221118224540.619276-232-uwe@kleine-koenig.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-12-03Input: bu21029_ts - Convert to i2c's .probe_new()Uwe Kleine-König1-3/+2
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20221118224540.619276-231-uwe@kleine-koenig.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-12-03Input: bu21013_ts - Convert to i2c's .probe_new()Uwe Kleine-König1-3/+2
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20221118224540.619276-230-uwe@kleine-koenig.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-12-03Input: auo-pixcir-ts - Convert to i2c's .probe_new()Uwe Kleine-König1-3/+2
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/20221118224540.619276-229-uwe@kleine-koenig.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-12-03Input: atmel_mxt_ts - Convert to i2c's .probe_new()Uwe Kleine-König1-2/+2
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20221118224540.619276-228-uwe@kleine-koenig.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-12-03Input: ar1021_i2c - Convert to i2c's .probe_new()Uwe Kleine-König1-3/+2
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20221118224540.619276-227-uwe@kleine-koenig.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-12-03Input: ad7879-i2c - Convert to i2c's .probe_new()Uwe Kleine-König1-3/+2
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20221118224540.619276-226-uwe@kleine-koenig.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-12-01Input: msg2638 - only read linux,keycodes array if necessaryVincent Knecht1-7/+9
The linux,keycodes property is optional. Fix the driver not probing when it's not specified. Fixes: c18ef50346f2 ("Input: msg2638 - add support for msg2138 key events") Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org> Link: https://lore.kernel.org/r/20221130210202.2069213-1-vincent.knecht@mailoo.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-11-30Input: elants_i2c - delete some dead codeDan Carpenter1-2/+0
We shuffled the error handling around so this condition is dead code now. The "error" variable is always zero. Signed-off-by: Dan Carpenter <error27@gmail.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/Y33BD9xkRC9euIdO@kili Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-11-23Input: stmpe-ts - drop obsolete dependency on COMPILE_TESTJean Delvare1-1/+1
Since commit 0166dc11be91 ("of: make CONFIG_OF user selectable"), it is possible to test-build any driver which depends on OF on any architecture by explicitly selecting OF. Therefore depending on COMPILE_TEST as an alternative is no longer needed. It is actually better to always build such drivers with OF enabled, so that the test builds are closer to how each driver will actually be built on its intended target. Building them without OF may not test much as the compiler will optimize out potentially large parts of the code. In the worst case, this could even pop false positive warnings. Dropping COMPILE_TEST here improves the quality of our testing and avoids wasting time on non-existent issues. Signed-off-by: Jean Delvare <jdelvare@suse.de> Link: https://lore.kernel.org/r/20221121145203.1efb0c08@endymion.delvare Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2022-11-23Input: raydium_ts_i2c - don't set wake_capable and wake_irqRaul E Rangel1-9/+0
The i2c-core will now handle setting the wake_irq and wake capability for DT and ACPI systems. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Link: https://lore.kernel.org/r/20220929093200.v6.13.Ia0b24ab02c22125c5fd686cc25872bd26c27ac23@changeid Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-28 17:16:11 +0300