| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
commit adea84ee6cdea611146c4251d3c1616f5a09feca upstream.
If the touchscreen controller reports a touch ID of 0, the driver
calculates the slot ID as touch->id - 1, which underflows to UINT_MAX.
This is passed to input_mt_slot() as -1.
Since the input core ignores negative slot values, the active slot remains
unchanged. The driver then reports the touch coordinates for the previously
active slot, corrupting its state.
Fix this by rejecting touch reports with ID 0.
Fixes: 07b8481d4aff ("Input: add MELFAS mms114 touchscreen driver")
Cc: stable@vger.kernel.org
Reported-by: sashiko-bot@kernel.org
Assisted-by: Antigravity:gemini-3.5-flash
Link: https://patch.msgid.link/20260704060115.353049-1-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 66725039f7090afe14c31bd259e2059a68f04023 upstream.
mms114_interrupt() reads a packet of touch data from the device into a
fixed-size on-stack buffer
struct mms114_touch touch[MMS114_MAX_TOUCH];
which holds MMS114_MAX_TOUCH (10) events of MMS114_EVENT_SIZE (8) bytes,
i.e. 80 bytes. The length of the I2C read into it is taken verbatim from
the device:
packet_size = mms114_read_reg(data, MMS114_PACKET_SIZE);
if (packet_size <= 0)
goto out;
...
error = __mms114_read_reg(data, MMS114_INFORMATION, packet_size,
(u8 *)touch);
packet_size is a single device register byte (0x0F) and the only check
is the lower bound packet_size <= 0; it is never bounded against the
size of touch[]. A malfunctioning, malicious or counterfeit controller
(or an attacker tampering with the I2C bus) can report a packet_size of
up to 255, so __mms114_read_reg() writes up to 175 bytes past the end of
touch[] on the IRQ-thread stack: a stack out-of-bounds write that can
overwrite the stack canary, saved registers and the return address.
A well-formed device never reports more than the buffer holds, so reject
an oversized packet and drop the report, consistent with the handler's
other error paths, rather than reading past the buffer.
Fixes: 07b8481d4aff ("Input: add MELFAS mms114 touchscreen driver")
Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260612-b4-disp-dc4b8dc4-v1-1-d7cb0a828d92@proton.me
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 478cdd736f2ce3114f90e775d7358136d3977b94 upstream.
tw_interrupt() accumulates each non-zero serial byte into a fixed
three-byte buffer with a running index that is only reset once a full
packet has been received *and* the device's two Y bytes agree:
tw->data[tw->idx++] = data;
if (tw->idx == TW_LENGTH && tw->data[1] == tw->data[2]) {
...
tw->idx = 0;
}
The reset is gated on tw->data[1] == tw->data[2], a value the device
controls. A malicious, malfunctioning or counterfeit Touchwindow
peripheral can stream non-zero bytes whose 2nd and 3rd bytes differ: the
index reaches TW_LENGTH without the equality holding, is never reset, and
keeps growing, so tw->data[tw->idx++] walks off the end of the three-byte
array and the rest of the heap-allocated struct tw, one attacker-chosen
byte at a time -- an unbounded, device-driven heap out-of-bounds write.
Reset the index on every completed packet and report an event only when
the two Y bytes match, like the other serio touchscreen drivers do.
Fixes: 11ea3173d5f2 ("Input: add driver for Touchwin serial touchscreens")
Cc: stable@vger.kernel.org
Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me>
Link: https://patch.msgid.link/20260613-b4-disp-69921bfd-v1-1-82c036899959@proton.me
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 856668312685d9a8f32d49a135a89c429d309f81 upstream.
The workaround for XPT2046 clears the command register, giving the
touchscreen controller a NOP. The change incorrectly re-uses the
req->scratch variable which is used as rx_buf for xfer[5], so by
the time xfer[6] occurs, the contents of req->scratch may not be
0. It was found that the touchscreen controller can end up in
a completely unresponsive state due to it being given a command
the driver does not expect.
Instead, rely on the spi_transfer behavior of tx_buf being NULL to
transmit all 0 bits and use the scratch variable for the rx_buf for
both the 1 byte command to and 2 byte response from the controller.
Also relocates the scratch member of struct ser_req to force it
into a different cache line to prevent any potential issues of
DMA stepping on unrelated data in other struct members due to
sharing the same cache line.
This change was tested on real TSC2046 and ADS7843 controllers,
but not the XPT2046 the workaround was originally created for.
Confirming that the original modification to clear the command
register does not impact either real controller.
Fixes: 781a07da9bb94 ("Input: ads7846 - add dummy command register clearing cycle")
Cc: stable@vger.kernel.org
Co-developed-by: Mark Featherston <mark@embeddedTS.com>
Signed-off-by: Mark Featherston <mark@embeddedTS.com>
Signed-off-by: Kris Bahnsen <kris@embeddedTS.com>
Link: https://patch.msgid.link/20260507164943.760009-1-kris@embeddedTS.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a6ac4e24c1a8a533bb61035184fdcc7eede4cc8d upstream.
The MMS134S and MMS136 touch controllers have an event size of 6 bytes
rather than 8 bytes. When __mms114_read_reg() reads the touch data
packet from the device into the touch buffer, the events are packed
tightly at 6-byte intervals. However, the driver iterates through the
events using standard C array indexing (touch[index]), where each
element is sizeof(struct mms114_touch) (8 bytes) apart. As a result, any
touch events beyond the first one are read from incorrect offsets and
parsed improperly.
Fix this by explicitly calculating the byte offset for each touch event
based on the device's specific event size.
Fixes: 53fefdd1d3a3 ("Input: mms114 - support MMS136")
Fixes: ab108678195f ("Input: mms114 - support MMS134S")
Reported-by: sashiko-bot@kernel.org
Assisted-by: Antigravity:gemini-3.5-flash
Reviewed-by: Bryam Vargas <hexlabsecurity@proton.me>
Link: https://patch.msgid.link/20260616050912.1531241-1-dmitry.torokhov@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5ed62a96e06be4e94b8296b7932afee550a70e04 upstream.
goodix_ts_read_input_report() copies the number of touch points reported
by the device into an on-stack buffer
u8 point_data[2 + GOODIX_MAX_CONTACT_SIZE * GOODIX_MAX_CONTACTS];
which is sized for at most GOODIX_MAX_CONTACTS (10) contacts. The only
runtime check bounds the per-interrupt count against ts->max_touch_num,
but that value is taken verbatim from a 4-bit field of the device
configuration block and is never clamped:
ts->max_touch_num = ts->config[MAX_CONTACTS_LOC] & 0x0f;
The nibble can be 0..15, so a malfunctioning, malicious or counterfeit
controller (or an attacker tampering with the I2C bus) can advertise up
to 15 contacts. goodix_ts_read_input_report() then accepts a touch_num
of up to 15 and the second goodix_i2c_read() writes
ts->contact_size * (touch_num - 1) bytes past the one-contact header into
point_data - up to 30 bytes (45 with the 9-byte report format) beyond the
92-byte buffer: a stack out-of-bounds write.
Clamp max_touch_num to GOODIX_MAX_CONTACTS, the number of contacts
point_data[] is sized for, when reading it from the configuration.
Fixes: a7ac7c95d468 ("Input: goodix - use max touch number from device config")
Cc: stable@vger.kernel.org
Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me>
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Link: https://patch.msgid.link/20260612-b4-disp-6844625d-v1-1-df0aed080c9d@proton.me
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit baa0210fb6a9dc3882509a9411b6d284d88fe30e upstream.
When a configuration file provides an object size that is larger than the
driver's known mxt_obj_size(object), the driver intends to discard the
extra bytes.
The loop iterates using for (i = 0; i < size; i++). Inside the loop, the
condition to skip processing extra bytes is:
if (i > mxt_obj_size(object))
continue;
Since i is a 0-based index, the valid indices for the object are 0 through
mxt_obj_size(object) - 1.
When i == mxt_obj_size(object), the condition evaluates to false, and the
code processes the byte instead of discarding it.
This causes the code to calculate byte_offset = reg + i - cfg->start_ofs
and writes the byte there, overwriting exactly one byte of the adjacent
instance or object.
Update the boundary check to skip extra bytes correctly by using >=.
Fixes: 50a77c658b80 ("Input: atmel_mxt_ts - download device config using firmware loader")
Cc: stable@vger.kernel.org
Assisted-by: Gemini:gemini-3.1-pro
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://patch.msgid.link/20260504185448.4055973-1-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2905281cbda52ec9df540113b35b835feb5fafd3 upstream.
nexio_read_data() pulls data_len and x_len from a packed __be16 header
in the device's interrupt packet and then walks packet->data[0..x_len)
and packet->data[x_len..data_len) comparing each byte against a
threshold.
Both fields are 16-bit on the wire (max 65535). The existing
adjustments shave at most 0x100 / 0x80 off, so the loop bound can still
reach roughly 0xfeff. The URB transfer buffer for NEXIO is rept_size
(1024) bytes from usb_alloc_coherent(), with the first 7 occupied by the
packed header — so packet->data[] has 1017 valid bytes. read_data()
callbacks are not given urb->actual_length, and nothing else bounds the
walk.
A device that lies about its length can get a ~64 KiB out-of-bounds read
past the coherent DMA allocation. The first index whose byte exceeds
NEXIO_THRESHOLD lands in begin_x / begin_y and from there into the
reported touch coordinates, so adjacent kernel memory contents leak to
userspace as ABS_X / ABS_Y events. Far enough out, the read can also
hit an unmapped page and fault.
Fix this all by clamping data_len to the buffer's data[] capacity and
x_len to data_len.
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Fixes: 5197424cdccc ("Input: usbtouchscreen - add NEXIO (or iNexio) support")
Cc: stable <stable@kernel.org>
Assisted-by: gkh_clanker_t1000
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/2026042026-chlorine-epidermis-fd6d@gregkh
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f5f9e07060519e2287e99019a6de1eb3ebb65c37 upstream.
The commit 68743c500c6e ("Input: edt-ft5x06 - use per-client debugfs
directory") removed the manual debugfs teardown, relying on the I2C core
to handle it. However, this creates a window where debugfs files are
still accessible after edt_ft5x06_ts_teardown_debugfs() frees
tsdata->raw_buffer.
To prevent a use-after-free, protect the freeing of raw_buffer with the
device mutex and set raw_buffer to NULL. The debugfs read function
already checks if raw_buffer is NULL under the same mutex, so this
safely avoids the use-after-free.
Fixes: 68743c500c6e ("Input: edt-ft5x06 - use per-client debugfs directory")
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/adnJicDh-bTUaWXP@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 248d3a73a0167dce15ba100477c3e778c4787178 upstream.
The current validation 'wire_order[i] > ARRAY_SIZE(config_pins)' allows
wire_order[i] to equal ARRAY_SIZE(config_pins), which causes out-of-bounds
access when used as index in 'config_pins[wire_order[i]]'.
Since config_pins has 4 elements (indices 0-3), the valid range for
wire_order should be 0-3. Fix the off-by-one error by using >= instead
of > in the validation check.
Signed-off-by: Junjie Cao <junjie.cao@intel.com>
Link: https://patch.msgid.link/20251114062817.852698-1-junjie.cao@intel.com
Fixes: bb76dc09ddfc ("input: ti_am33x_tsc: Order of TSC wires, made configurable")
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d579478cee228bdc0029a0c12a1f6a63ea9d1c77 upstream.
Under certain conditions (more prevalent after a suspend/resume cycle),
the touchscreen controller can send the "boot complete" interrupt before
it actually finished booting. In those cases, attempting to read touch
data resuls in a stream of "not ready" messages being read and
interpreted as a touch report. Check that the response is in fact a
touch report and discard it otherwise.
Reported-by: pitust <piotr@stelmaszek.com>
Closes: https://oftc.catirclogs.org/asahi/2025-12-17#34878715;
Fixes: 471a92f8a21a ("Input: apple_z2 - add a driver for Apple Z2 touchscreens")
Signed-off-by: Sasha Finkelstein <fnkl.kernel@gmail.com>
Link: https://patch.msgid.link/20251218-z2-init-fix-v1-1-48e3aa239caf@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Sync up with the mainline to bring in definition of
INPUT_PROP_HAPTIC_TOUCHPAD.
|
|
The reset line is being set to input on non-ACPI devices apparently to
save power. This isn't being done on ACPI devices as it's been found
that some ACPI devices don't have a pull-up resistor fitted. This can
also be the case for non-ACPI devices, resulting in:
[ 941.672207] Goodix-TS 1-0014: Error reading 10 bytes from 0x814e: -110
[ 942.696168] Goodix-TS 1-0014: Error reading 10 bytes from 0x814e: -110
[ 945.832208] Goodix-TS 1-0014: Error reading 10 bytes from 0x814e: -110
This behaviour appears to have been initialing introduced in
ec6e1b4082d9. This doesn't seem to be based on information in either the
GT911 or GT9271 datasheets cited as sources of information for this
change. Thus it seems likely that it is based on functionality in the
Android driver which it also lists. This behaviour may be viable in very
specific instances where the hardware is well known, but seems unwise in
the upstream kernel where such hardware requirements can't be
guaranteed.
Remove this over optimisation to improve reliability on non-ACPI
devices.
Signed-off-by: Martyn Welch <martyn.welch@collabora.com>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Link: https://lore.kernel.org/r/20251009134138.686215-1-martyn.welch@collabora.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Some newer devices use an ACPI hardware ID of GDIX1003 for their Goodix
touchscreen controller, instead of GDIX1001 / GDIX1002. Add GDIX1003
to the goodix_acpi_match[] table.
Reported-by: Weikang Guo <guoweikang.kernel@gmail.com>
Closes: https://lore.kernel.org/linux-input/20250225024409.1467040-1-guoweikang.kernel@gmail.com/
Tested-by: Weikang Guo <guoweikang.kernel@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20251013121022.44333-1-hansg@kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- Conversions to yaml/json schema and fixes for input-related device
tree bindings
- New drivers:
- Awinic AW86927 haptic chip
- Hynitron CST816x series controller
- Himax HX852x(ES) touchscreen controller
- Fix uinput to not leak kernel memory via a gap in
uinput_ff_upload_compat structure
- Prevent overflow in pressure calculation in tsc2007 driver causing
phantom touches
- Make the Atmel maxTouch driver support generic touchscreen
configuration (flip, rotate, etc)
- Drop support for platform data in tca8418_keypad, pxa27x-keypad,
spear-keyboard and twl4030_keypad drivers, they all now rely on
generic device properties for configuration
- Other assorted changes and fixes
* tag 'input-for-v6.18-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (50 commits)
Input: atmel_mxt_ts - allow reset GPIO to sleep
Input: aw86927 - fix error code in probe()
Input: psxpad-spi - add a check for the return value of spi_setup()
Input: uinput - zero-initialize uinput_ff_upload_compat to avoid info leak
Input: aw86927 - add driver for Awinic AW86927
dt-bindings: input: Add Awinic AW86927
dt-bindings: touchscreen: remove touchscreen.txt
dt-bindings: arm: bcm: raspberrypi,bcm2835-firmware: Add touchscreen child node
dt-bindings: touchscreen: convert eeti bindings to json schema
Input: pm8941-pwrkey - disable wakeup for resin by default
dt-bindings: input: pm8941-pwrkey: Document wakeup-source property
Input: add driver for Hynitron CST816x series
dt-bindings: input: touchscreen: add hynitron cst816x series
Input: imx6ul_tsc - set glitch threshold by DTS property
dt-bindings: touchscreen: fsl,imx6ul-tsc: support glitch thresold
dt-bindings: touchscreen: add debounce-delay-us property
Input: ps2-gpio - fix typo
Input: atmel_mxt_ts - add support for generic touchscreen configurations
dt-bindings: input: maxtouch: add common touchscreen properties
dt-bindings: touchscreen: convert zet6223 bindings to json schema
...
|
|
The reset GPIO is not toggled in any critical section where it couldn't
sleep, allow the reset GPIO to sleep. This allows the driver to operate
reset GPIOs connected to I2C GPIO expanders.
Signed-off-by: Marek Vasut <marek.vasut@mailbox.org>
Link: https://lore.kernel.org/r/20251005023335.166483-1-marek.vasut@mailbox.org
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Introduce support for the Hynitron CST816x series touchscreen controller
used for 240×240 1.28-inch Round LCD Display Module manufactured
by Waveshare Electronics. The driver is designed based on an Arduino
implementation marked as under MIT License. This driver is written
for a particular round display based on the CST816S controller, which
is not compatiable with existing driver for Hynitron controllers.
Signed-off-by: Oleh Kuzhylnyi <kuzhylol@gmail.com>
Link: https://lore.kernel.org/r/20250921125939.249788-2-kuzhylol@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Set the glitch threshold by DTS property and keep the existing default
behavior if the 'debounce-delay-us' is not present.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250923143746.2857292-7-dario.binacchi@amarulasolutions.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
This provides support for generic touchscreen configuration options like
swapped-x-y, min-x, min-y, size-x, size-y, etc.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Link: https://lore.kernel.org/r/20250909054903.11519-3-clamor95@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Replace opencoded masking and shifting, with BIT(), GENMASK(),
FIELD_GET() and FIELD_PREP() macros.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250917080534.1772202-3-dario.binacchi@amarulasolutions.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Replace 'SETING' with 'SETTING'.
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250917080534.1772202-2-dario.binacchi@amarulasolutions.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Add a simple driver for the Himax HX852x(ES) touch panel controller,
with support for multi-touch and capacitive touch keys.
The driver is somewhat based on sample code from Himax. However, that
code was rather confusing, so that we spent a significant amount of
time just trying to understand the packet format and register commands.
In this driver they are described with clean structs and defines rather
than magic numbers and offset calculations.
Co-developed-by: Jonathan Albrieux <jonathan.albrieux@gmail.com>
Signed-off-by: Jonathan Albrieux <jonathan.albrieux@gmail.com>
Reviewed-by: Jeff LaBundy <jeff@labundy.com>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20250915-hx852x-v5-2-b938182f1056@linaro.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
mc13xxx_irq_ack() got deprecated and became dead code with commit
10f9edaeaa30 ("mfd: mc13xxx: Use regmap irq framework for interrupts").
It should be safe to remove it now.
Signed-off-by: Alexander Kurz <akurz@blala.de>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> # for input
Link: https://lore.kernel.org/r/20250811064358.1659-1-akurz@blala.de
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The touch resistance calculation in the tsc2007 driver is prone to
overflow if (z2 - z1) is large and also x is reasonably big. This
overflow results in the driver emitting input events when very little
touch pressure is applied. In these events the x and y coordinates can
be substantially off.
Avoid the overflow by using u64 when calculating resistance value.
Signed-off-by: Johannes Kirchmair <johannes.kirchmair@skidata.com>
Link: https://lore.kernel.org/r/20250129-fix_tsc_calculation_overflow-v2-1-9e51333496ad@skidata.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
In case tsc2007 is used as an ADC sensor there will be no interrupt
provided at all, so set up an interrupt only if one is present.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Link: https://lore.kernel.org/r/20250824091927.105121-3-clamor95@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Since pen GPIO request is optional, there is no reason to throw dev_warn if
such GPIO is not defined.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Link: https://lore.kernel.org/r/20250824091927.105121-2-clamor95@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
A number of modules in the input subsystem use EXPORT_SYMBOL() and
friends without explicitly including the corresponding header
<linux/export.h>. While the build currently succeeds due to this header
being pulled in transitively, this is not guaranteed to be the case in
the future.
Let's add the explicit include to make the dependencies clear and
prevent future build breakage.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
When using MMIO with regmap, fast_io is implied. No need to set it
again.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20250813161517.4746-7-wsa+renesas@sang-engineering.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
The conversion of all GPIO drivers to using the .set_rv() and
.set_multiple_rv() callbacks from struct gpio_chip (which - unlike their
predecessors - return an integer and allow the controller drivers to
indicate failures to users) is now complete and the legacy ones have
been removed. Rename the new callbacks back to their original names in
one sweeping change.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- updates to several drivers consuming GPIO APIs to use setters
returning error codes
- an infrastructure allowing to define "overlays" for touchscreens
carving out regions implementing buttons and other elements from a
bigger sensors and a corresponding update to st1232 driver
- an update to AT/PS2 keyboard driver to map F13-F24 by default
- Samsung keypad driver got a facelift
- evdev input handler will now bind to all devices using EV_SYN event
instead of abusing id->driver_info
- two new sub-drivers implementing 1A (capacitive buttons) and 21
(forcepad button) functions in Synaptics RMI driver
- support for polling mode in Goodix touchscreen driver
- support for support for FocalTech FT8716 in edt-ft5x06 driver
- support for MT6359 in mtk-pmic-keys driver
- removal of pcf50633-input driver since platform it was used on is
gone
- new definitions for game controller "grip" buttons (BTN_GRIP*) and
corresponding changes to xpad and hid-steam controller drivers
- a new definition for "performance" key
* tag 'input-for-v6.17-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (38 commits)
HID: hid-steam: Use new BTN_GRIP* buttons
Input: add keycode for performance mode key
Input: max77693 - convert to atomic pwm operation
Input: st1232 - add touch-overlay handling
dt-bindings: input: touchscreen: st1232: add touch-overlay example
Input: touch-overlay - add touchscreen overlay handling
dt-bindings: touchscreen: add touch-overlay property
Input: atkbd - correctly map F13 - F24
Input: xpad - use new BTN_GRIP* buttons
Input: Add and document BTN_GRIP*
Input: xpad - change buttons the D-Pad gets mapped as to BTN_DPAD_*
Documentation: Fix capitalization of XBox -> Xbox
Input: synaptics-rmi4 - add support for F1A
dt-bindings: input: syna,rmi4: Document F1A function
Input: synaptics-rmi4 - add support for Forcepads (F21)
Input: mtk-pmic-keys - add support for MT6359 PMIC keys
Input: remove special handling of id->driver_info when matching
Input: evdev - switch matching to EV_SYN
Input: samsung-keypad - use BIT() and GENMASK() where appropriate
Input: samsung-keypad - use per-chip parameters
...
|
|
Prepare input updates for 6.17 merge window.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into next
Merge an immutable branch between MFD, GPIO, Input and PWM to resolve
conflicts for the merge window pull request.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core updates from Danilo Krummrich:
"debugfs:
- Remove unneeded debugfs_file_{get,put}() instances
- Remove last remnants of debugfs_real_fops()
- Allow storing non-const void * in struct debugfs_inode_info::aux
sysfs:
- Switch back to attribute_group::bin_attrs (treewide)
- Switch back to bin_attribute::read()/write() (treewide)
- Constify internal references to 'struct bin_attribute'
Support cache-ids for device-tree systems:
- Add arch hook arch_compact_of_hwid()
- Use arch_compact_of_hwid() to compact MPIDR values on arm64
Rust:
- Device:
- Introduce CoreInternal device context (for bus internal methods)
- Provide generic drvdata accessors for bus devices
- Provide Driver::unbind() callbacks
- Use the infrastructure above for auxiliary, PCI and platform
- Implement Device::as_bound()
- Rename Device::as_ref() to Device::from_raw() (treewide)
- Implement fwnode and device property abstractions
- Implement example usage in the Rust platform sample driver
- Devres:
- Remove the inner reference count (Arc) and use pin-init instead
- Replace Devres::new_foreign_owned() with devres::register()
- Require T to be Send in Devres<T>
- Initialize the data kept inside a Devres last
- Provide an accessor for the Devres associated Device
- Device ID:
- Add support for ACPI device IDs and driver match tables
- Split up generic device ID infrastructure
- Use generic device ID infrastructure in net::phy
- DMA:
- Implement the dma::Device trait
- Add DMA mask accessors to dma::Device
- Implement dma::Device for PCI and platform devices
- Use DMA masks from the DMA sample module
- I/O:
- Implement abstraction for resource regions (struct resource)
- Implement resource-based ioremap() abstractions
- Provide platform device accessors for I/O (remap) requests
- Misc:
- Support fallible PinInit types in Revocable
- Implement Wrapper<T> for Opaque<T>
- Merge pin-init blanket dependencies (for Devres)
Misc:
- Fix OF node leak in auxiliary_device_create()
- Use util macros in device property iterators
- Improve kobject sample code
- Add device_link_test() for testing device link flags
- Fix typo in Documentation/ABI/testing/sysfs-kernel-address_bits
- Hint to prefer container_of_const() over container_of()"
* tag 'driver-core-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core: (84 commits)
rust: io: fix broken intra-doc links to `platform::Device`
rust: io: fix broken intra-doc link to missing `flags` module
rust: io: mem: enable IoRequest doc-tests
rust: platform: add resource accessors
rust: io: mem: add a generic iomem abstraction
rust: io: add resource abstraction
rust: samples: dma: set DMA mask
rust: platform: implement the `dma::Device` trait
rust: pci: implement the `dma::Device` trait
rust: dma: add DMA addressing capabilities
rust: dma: implement `dma::Device` trait
rust: net::phy Change module_phy_driver macro to use module_device_table macro
rust: net::phy represent DeviceId as transparent wrapper over mdio_device_id
rust: device_id: split out index support into a separate trait
device: rust: rename Device::as_ref() to Device::from_raw()
arm64: cacheinfo: Provide helper to compress MPIDR value into u32
cacheinfo: Add arch hook to compress CPU h/w id into 32 bits for cache-id
cacheinfo: Set cache 'id' based on DT data
container_of: Document container_of() is not to be used in new code
driver core: auxiliary bus: fix OF node leak
...
|
|
Use touch-overlay to support overlay objects such as buttons and a
resized frame defined in the device tree.
A key event will be generated if the coordinates of a touch event are
within the area defined by the button properties.
Reviewed-by: Jeff LaBundy <jeff@labundy.com>
Signed-off-by: Javier Carrasco <javier.carrasco@wolfvision.net>
Link: https://lore.kernel.org/r/20241016-feature-ts_virtobj_patch-v11-4-b292a1bbb0a1@wolfvision.net
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- support for Acer NGR 200 Controller added to xpad driver
- xpad driver will no longer log errors about URBs at sudden disconnect
- a fix for potential NULL dereference in cs40l50-vibra driver
- several drivers have been switched to using scnprintf() to suppress
warnings about potential output truncation
* tag 'input-for-v6.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: cs40l50-vibra - fix potential NULL dereference in cs40l50_upload_owt()
Input: alps - use scnprintf() to suppress truncation warning
Input: iqs7222 - explicitly define number of external channels
Input: xpad - support Acer NGR 200 Controller
Input: xpad - return errors from xpad_try_sending_next_out_packet() up
Input: xpad - adjust error handling for disconnect
Input: apple_z2 - drop default ARCH_APPLE in Kconfig
Input: Fully open-code compatible for grepping
dt-bindings: HID: i2c-hid: elan: Introduce Elan eKTH8D18
Input: psmouse - switch to use scnprintf() to suppress truncation warning
Input: lifebook - switch to use scnprintf() to suppress truncation warning
Input: alps - switch to use scnprintf() to suppress truncation warning
Input: atkbd - switch to use scnprintf() to suppress truncation warning
Input: fsia6b - suppress buffer truncation warning for phys
Input: iqs626a - replace snprintf() with scnprintf()
|
|
This driver is compatible with the FocalTech FT8716 touchscreen, which
supports up to 10 concurrent touch points. Add a compatible for it.
Signed-off-by: Jens Reidel <adrian@mainlining.org>
Link: https://lore.kernel.org/r/20250313202017.19621-3-adrian@mainlining.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
The I2C core now provides a debugfs entry for each client. Let this
driver use it instead of the custom directory in debugfs root. Further
improvements by this change: support of multiple instances.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20250318091904.22468-1-wsa+renesas@sang-engineering.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
There are designs incorporating Goodix touch controller that do not
connect interrupt pin, for example Raspberry Pi. To support such systems
use polling mode for the input device when I2C client does not have
interrupt assigned to it.
Signed-off-by: Joseph Guo <qijian.guo@nxp.com>
Reviewed-by: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20250522020418.1963422-1-qijian.guo@nxp.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Link: https://lore.kernel.org/r/20250610-gpiochip-set-rv-input-v1-1-5875240b48d8@linaro.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
When the first driver for Apple Silicon was upstreamed we accidentally
included `default ARCH_APPLE` in its Kconfig which then spread to almost
every subsequent driver. As soon as ARCH_APPLE is set to y this will
pull in many drivers as built-ins which is not what we want.
Thus, drop `default ARCH_APPLE` from Kconfig.
Signed-off-by: Sven Peter <sven@kernel.org>
Link: https://lore.kernel.org/r/20250612-apple-kconfig-defconfig-v1-8-0e6f9cb512c1@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
It is very useful to find driver implementing compatibles with `git grep
compatible`, so driver should not use defines for that string, even if
this means string will be effectively duplicated.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250613071653.46809-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
The normal bin_attrs field can now handle const pointers.
This makes the _new variant unnecessary.
Switch all users back.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20250530-sysfs-const-bin_attr-final-v3-4-724bfcf05b99@weissschuh.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Move this API to the canonical timer_*() namespace.
[ tglx: Redone against pre rc1 ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/aB2X0jCKQO56WdMt@gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- Synaptics touchpad on multiple laptops (Dynabook Portege X30L-G,
Dynabook Portege X30-D, TUXEDO InfinityBook Pro 14 v5, Dell Precision
M3800, HP Elitebook 850 G1) switched from PS/2 to SMBus mode
- a number of new controllers added to xpad driver: HORI Drum
controller, PowerA Fusion Pro 4, PowerA MOGA XP-Ultra controller,
8BitDo Ultimate 2 Wireless Controller, 8BitDo Ultimate 3-mode
Controller, Hyperkin DuchesS Xbox One controller
- fixes to xpad driver to properly handle Mad Catz JOYTECH NEO SE
Advanced and PDP Mirror's Edge Official controllers
- fixes to xpad driver to properly handle "Share" button on some
controllers
- a fix for device initialization timing and for waking up the
controller in cyttsp5 driver
- a fix for hisi_powerkey driver to properly wake up from s2idle state
- other assorted cleanups and fixes
* tag 'input-for-v6.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: xpad - fix xpad_device sorting
Input: xpad - add support for several more controllers
Input: xpad - fix Share button on Xbox One controllers
Input: xpad - fix two controller table values
Input: hisi_powerkey - enable system-wakeup for s2idle
Input: synaptics - enable InterTouch on Dell Precision M3800
Input: synaptics - enable InterTouch on TUXEDO InfinityBook Pro 14 v5
Input: synaptics - enable InterTouch on Dynabook Portege X30L-G
Input: synaptics - enable InterTouch on Dynabook Portege X30-D
Input: synaptics - enable SMBus for HP Elitebook 850 G1
Input: mtk-pmic-keys - fix possible null pointer dereference
Input: xpad - add support for 8BitDo Ultimate 2 Wireless Controller
Input: cyttsp5 - fix power control issue on wakeup
MAINTAINERS: .mailmap: update Mattijs Korpershoek's email address
dt-bindings: mediatek,mt6779-keypad: Update Mattijs' email address
Input: stmpe-ts - use module alias instead of device table
Input: cyttsp5 - ensure minimum reset pulse width
Input: sparcspkr - avoid unannotated fall-through
input/joystick: magellan: Mark __nonstring look-up table
|
|
The power control function ignores the "on" argument when setting the
report ID, and thus is always sending HID_POWER_SLEEP. This causes a
problem when trying to wakeup.
Fix by sending the state variable, which contains the proper HID_POWER_ON or
HID_POWER_SLEEP based on the "on" argument.
Fixes: 3c98b8dbdced ("Input: cyttsp5 - implement proper sleep and wakeup procedures")
Cc: stable@vger.kernel.org
Signed-off-by: Mikael Gonella-Bolduc <mgonellabolduc@dimonoff.com>
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Reviewed-by: Alistair Francis <alistair@alistair23.me>
Link: https://lore.kernel.org/r/20250423135243.1261460-1-hugo@hugovil.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
When compile tested with W=1 on x86_64 with driver as built-in:
stmpe-ts.c:371:34: error: unused variable 'stmpe_ts_ids' [-Werror,-Wunused-const-variable]
Ideally this would be referenced from the platform_driver, but since
the compatible string is already matched by the mfd driver for its
parent device, that would break probing.
In this case, the of_device_id table just serves as a module alias
for loading the driver, while the device itself is probed using
the platform device name.
Remove the table and instead use a module alias that reflects how
the driver is actually probed.
Link: https://lore.kernel.org/lkml/20240403080702.3509288-8-arnd@kernel.org/
Link: https://lore.kernel.org/lkml/181dbdb8-c050-4966-8cb4-2f39495ff3f9@app.fastmail.com/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250409122314.2848028-3-arnd@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
The current reset pulse width is measured to be 5us on a
Renesas RZ/G2L SOM. The manufacturer's minimum reset pulse width is
specified as 10us.
Extend reset pulse width to make sure it is long enough on all platforms.
Also reword confusing comments about reset pin assertion.
Fixes: 5b0c03e24a06 ("Input: Add driver for Cypress Generation 5 touchscreen")
Cc: stable@vger.kernel.org
Acked-by: Alistair Francis <alistair@alistair23.me>
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://lore.kernel.org/r/20250410184633.1164837-1-hugo@hugovil.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer cleanups from Thomas Gleixner:
"A set of final cleanups for the timer subsystem:
- Convert all del_timer[_sync]() instances over to the new
timer_delete[_sync]() API and remove the legacy wrappers.
Conversion was done with coccinelle plus some manual fixups as
coccinelle chokes on scoped_guard().
- The final cleanup of the hrtimer_init() to hrtimer_setup()
conversion.
This has been delayed to the end of the merge window, so that all
patches which have been merged through other trees are in mainline
and all new users are catched.
Doing this right before rc1 ensures that new code which is merged post
rc1 is not introducing new instances of the original functionality"
* tag 'timers-cleanups-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tracing/timers: Rename the hrtimer_init event to hrtimer_setup
hrtimers: Rename debug_init_on_stack() to debug_setup_on_stack()
hrtimers: Rename debug_init() to debug_setup()
hrtimers: Rename __hrtimer_init_sleeper() to __hrtimer_setup_sleeper()
hrtimers: Remove unnecessary NULL check in hrtimer_start_range_ns()
hrtimers: Make callback function pointer private
hrtimers: Merge __hrtimer_init() into __hrtimer_setup()
hrtimers: Switch to use __htimer_setup()
hrtimers: Delete hrtimer_init()
treewide: Convert new and leftover hrtimer_init() users
treewide: Switch/rename to timer_delete[_sync]()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- a brand new driver for touchpads and touchbars in newer Apple devices
- support for Berlin-A series in goodix-berlin touchscreen driver
- improvements to matrix_keypad driver to better handle GPIOs toggling
- assorted small cleanups in other input drivers
* tag 'input-for-v6.15-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: goodix_berlin - add support for Berlin-A series
dt-bindings: input: goodix,gt9916: Document gt9897 compatible
dt-bindings: input: matrix_keypad - add wakeup-source property
dt-bindings: input: matrix_keypad - add missing property
Input: pm8941-pwrkey - fix dev_dbg() output in pm8941_pwrkey_irq()
Input: synaptics - hide unused smbus_pnp_ids[] array
Input: apple_z2 - fix potential confusion in Kconfig
Input: matrix_keypad - use fsleep for delays after activating columns
Input: matrix_keypad - add settle time after enabling all columns
dt-bindings: input: matrix_keypad: add settle time after enabling all columns
dt-bindings: input: matrix_keypad: convert to YAML
dt-bindings: input: Correct indentation and style in DTS example
MAINTAINERS: Add entries for Apple Z2 touchscreen driver
Input: apple_z2 - add a driver for Apple Z2 touchscreens
dt-bindings: input: touchscreen: Add Z2 controller
Input: Switch to use hrtimer_setup()
Input: drop vb2_ops_wait_prepare/finish
|
|
timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree
over and remove the historical wrapper inlines.
Conversion was done with coccinelle plus manual fixups where necessary.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
