summaryrefslogtreecommitdiff
path: root/drivers/input/keyboard
AgeCommit message (Collapse)AuthorFilesLines
2013-02-14Input: add couple of missing GENERIC_HARDIRQS dependenciesHeiko Carstens1-2/+2
When removing the !S390 dependency from drivers/input/Kconfig a couple of drivers don't compile because they have a dependency on GENERIC_HARDIRQS. So add the missing dependencies. Fixes e.g. this one: drivers/input/keyboard/lm8323.c: In function ‘lm8323_suspend’: drivers/input/keyboard/lm8323.c:801:2: error: implicit declaration of function ‘irq_set_irq_wake’ [-Werror=implicit-function-declaration] Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-01-25Input: goldfish - virtual input event driverBrian Swetland3-0/+205
This device is a direct pipe from "hardware" to the input event subsystem, allowing us to avoid having to route "keypad" style events through an AT keyboard driver (gross!). As with the other submissions this driver is cross architecture. Signed-off-by: Mike A. Chan <mikechan@google.com> [Tided up to work on x86] Signed-off-by: Sheng Yang <sheng@linux.intel.com> Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com> Signed-off-by: Xiaohui Xin <xiaohui.xin@intel.com> Signed-off-by: Jun Nakajima <jun.nakajima@intel.com> Signed-off-by: Bruce Beare <bruce.j.beare@intel.com> [Ported to 3.4] Signed-off-by: Tom Keel <thomas.keel@intel.com> [Cleaned up for 3.7 and submission] Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-01-22Input: atkbd - fix multi-byte scancode handling on reconnectShawn Nematbakhsh1-21/+51
On resume from suspend there is a possibility for multi-byte scancodes to be handled incorrectly. atkbd_reconnect disables the processing of scancodes in software by calling atkbd_disable, but the keyboard may still be active because no disconnect command was sent. Later, software handling is re-enabled. If a multi-byte scancode sent from the keyboard straddles the re-enable, only the latter byte(s) will be handled. In practice, this leads to cases where multi-byte break codes (ex. "e0 4d" - break code for right-arrow) are misread as make codes ("4d" - make code for numeric 6), leading to one or more unwanted, untyped characters being interpreted. The solution implemented here involves sending command f5 (reset disable) to the keyboard prior to disabling software handling of codes. Later, the command to re-enable the keyboard is sent only after we are prepared to handle scancodes. Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-01-17Input: atkbd - fix a typo in a messageDmitry Torokhov1-1/+1
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-01-17Input: tegra-kbc - remove default keymapLaxman Dewangan1-169/+7
Tegra KBC driver have the default key mapping for 16x8 configuration. The key mapping can be provided through platform data or through DT and the mapping varies from platform to platform, hence this default mapping is not so useful. Remove the default mapping to reduce the code lines of the driver. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-01-17Input: tegra-kbc - add support for rows/columns configuration from dtLaxman Dewangan1-19/+63
The NVIDIA's Tegra KBC has maximum 24 pins to make matrix keypad. Any pin can be configured as row or column. The maximum column pin can be 8 and maximum row pin can be 16. Remove the assumption that all first 16 pins will be used as row and remaining as columns and Add the property for configuring pins to either row or column from DT. Update the devicetree binding document accordingly. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-01-17Input: tegra-kbc - use devm_* for resource allocationLaxman Dewangan1-78/+27
Use devm_* for memory, clock, irq, input device allocation. This reduces code for freeing these resources. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-01-17Input: tegra-kbc - fix build warningLaxman Dewangan1-12/+12
Fix the following build warning when building driver with CONFIG_PM_SLEEP not selected. tegra-kbc.c:360:13: warning: 'tegra_kbc_set_keypress_interrupt' defined but not used [-Wunused-function] Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-01-05Input: qt2160 - add support for LEDsJavier Martin1-2/+139
Outputs x8..x0 of the qt2160 can have leds attached to it. This patch handles those outputs using the generic LED framework. The PWM controls available in the chip are used to achieve different levels of brightness. Signed-off-by: Javier Martin <javier.martin@vista-silicon.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-01-04Input: imx_keypad - add device tree supportLiu Ying1-18/+25
This patch adds device tree support for imx keypad driver. Signed-off-by: Liu Ying <Ying.Liu@freescale.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-12-04Input: gpio_keys_polled - switch to using gpio_request_one()Dmitry Torokhov1-10/+2
This saves us a few lines of code. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-12-04Input: gpio_keys - switch to using gpio_request_one()Dmitry Torokhov1-9/+1
This saves us a few lines of code. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-29Input: gpio-keys-polled - honor 'autorepeat' setting in platform dataAlexander Shiyan1-1/+4
Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-29Input: tca8418-keypad - switch to using managed resourcesDmitry Torokhov1-53/+25
Let's switch to using devm_*() interfaces to manage our resources, thus will simplify error unwinding a bit. Reviewed-by: Alban Bedel <alban.bedel@avionic-design.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-29Input: tca8418_keypad - increase severity of failures in probe()Dmitry Torokhov1-3/+3
Failures to build a keymap, request an IRQ, or register input device are fatal for the driver, therefore the messages should have "error" severity instead of "debug". Reviewed-by: Alban Bedel <alban.bedel@avionic-design.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-29Input: tca8418_keypad - move device ID tables closer to where they are usedDmitry Torokhov1-15/+14
This matches structure of most other input drivers. Reviewed-by: Alban Bedel <alban.bedel@avionic-design.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-29Input: tca8418_keypad - use dev_get_platdata() to retrieve platform dataDmitry Torokhov1-1/+1
We need to use proper accessor functions instead of directly poking into various structures. Reviewed-by: Alban Bedel <alban.bedel@avionic-design.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-29Input: tca8418_keypad - use a temporary variable for parent deviceDmitry Torokhov1-10/+10
Use a temporary variable for our parent device (coming from I2C client structure); we'll be also using it during conversion to managed resources. Reviewed-by: Alban Bedel <alban.bedel@avionic-design.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-29Input: tca8418_keypad - add support for shared interruptAlban Bedel1-3/+7
Signed-off-by: Alban Bedel <alban.bedel@avionic-design.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-29Input: tca8418_keypad - add support for device tree bindingsAlban Bedel1-27/+41
Signed-off-by: Alban Bedel <alban.bedel@avionic-design.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-28Input: gpio_keys - disable hardware on suspendJonas Aaberg1-5/+22
Disable hardware if active when suspending if the hw can not wake the system from suspend. [Dmitry Torokhov: use input_dev->users instead of a separate flag] Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Philippe Langlais <philippe.langlais@linaro.org> Reviewed-by: Bengt Jonsson <bengt.g.jonsson@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-28Input: gpio_keys - report initial state when opening the deviceDmitry Torokhov1-13/+26
Instead of reporting the initial stage when the device is registered we should do it when the device is opened (so there are users). Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-28Input: samsung-keypad - switch to using managed resourcesSachin Kamat1-72/+31
devm_* functions are device managed and make error handling and code simpler. While at it also fix error exit paths. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-28Input: spear-keyboard - add clk_{un}prepare() supportVipul Kumar Samar1-0/+10
clk_{un}prepare is mandatory for platforms using common clock framework. Because for SPEAr we don't do anything in clk_{un}prepare() calls, just call them once in probe/remove. Signed-off-by: Vipul Kumar Samar <vipulkumar.samar@st.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-25Input: imx_keypad - only set enabled columns to open-drainAndreas Pretzsch1-1/+2
In imx_keypad_inhibit(), all 8 columns were set to open-drain, in contrast to the rest of the driver, where only the enabled columns are modified/used. Contrary to the normal expectation, this also affects column I/Os not even mapped via IOMUX to the KPP hardware module but used as a GPIO. Therefore only init enabled columns to open-drain and leave all others with their default reset value of 0, i.e. totem-pole. Signed-off-by: Andreas Pretzsch <apr@cn-eng.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-24Input: stmpe-keypad - add support for Device Tree bindingsDmitry Torokhov1-9/+51
This patch allows the STMPE driver to be successfully probed and initialised when Device Tree support is enabled. Besides the usual platform data changes, we also separate the process of filling in the 'in use' pin bitmap, as we have to extract the information from Device Tree in the DT boot case. Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-24Input: remove use of __devexitBill Pemberton40-43/+43
CONFIG_HOTPLUG is going away as an option so __devexit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-24Input: remove use of __devinitBill Pemberton38-81/+79
CONFIG_HOTPLUG is going away as an option so __devinit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-24Input: remove use of __devinitconstBill Pemberton2-2/+2
CONFIG_HOTPLUG is going away as an option so __devinitconst is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-24Input: remove use of __devinitdataBill Pemberton1-2/+2
CONFIG_HOTPLUG is going away as an option so __devinitdata is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-24Input: remove use of __devexit_pBill Pemberton40-40/+40
CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-21Input: matrix-keypad - add device tree supportAnilKumar Ch1-22/+97
Also the driver was modifued to take advantage of recent improvements in matrix_keypad_build_keymap() implementation, which automatically allocates memory for keymap. The driver was tested on AM335x EVM. Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Acked-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-10Input: stmpe-keyboard - switch to using managed resourcesViresh Kumar1-44/+28
This patch frees stmpe-keyboard driver from burden of freeing resources :) devm_* derivatives of multiple routines are used while allocating resources, which would be freed automatically by kernel. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-10Input: spear-keyboard - switch to using managed resourcesViresh Kumar1-54/+23
This patch frees spear-keyboard driver from burden of freeing resources :) devm_* derivatives of multiple routines are used while allocating resources, which would be freed automatically by kernel. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-10Input: spear-keyboard - fix for balancing the enable_irq_wakeDeepak Sikri1-3/+8
This patch handles the fix for unbalanced irq for the cases when enable_irq_wake fails, and a warning related to same is displayed on the console. The workaround is handled at the driver level. Signed-off-by: Deepak Sikri <deepak.sikri@st.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-10Input: nomadik-ske-keypad - start using the apb_pclkUlf Hansson1-2/+20
Previously this clock was handled internally by the clockdriver, but now this is separate clk. So we need take care of it. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-08Input: nomadik-ske-keypad - fixup use of clkUlf Hansson1-4/+10
Do proper error handling for clk and make sure clocks are being prepared|unprepared as well as enabled|disabled. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-08Merge tag 'v3.7-rc4' into next to sync up Wacom bitsDmitry Torokhov2-0/+4
Linux 3.7-rc4
2012-10-30Merge tag 'v3.7-rc3' into next to sync up with recent USB and MFD changesDmitry Torokhov11-131/+47
2012-10-30Input: lpc32xx-keys - select INPUT_MATRIXKMAPRoland Stigge1-0/+1
This adds a "select" dependency of KEYBOARD_LPC32XX on INPUT_MATRIXKMAP, as the other drivers are doing in this regard. This fixes the following compile error if KEYBOARD_LPC32XX is enabled but INPUT_MATRIXKMAP is not: drivers/input/keyboard/lpc32xx-keys.c:230: undefined reference to `matrix_keypad_build_keymap' Signed-off-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-10-30Input: pxa27x_keypad - clear pending interrupts on keypad configVasily Khoruzhick1-0/+3
Bootloader can leave interrupt bit pending, and it confuses driver. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-10-25Input: qt2160 - fix qt2160_write() implementationJavier Martin1-14/+5
The previous implementation of qt2160_write() didn't work properly because the value was actually not written to the device. Probably nobody detected this because the only write that was issued was the one related to auto calibration. In order to fix the problem use a similar aproach as qt1070 instead. Signed-off-by: Javier Martin <javier.martin@vista-silicon.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-10-25Input: remove CONFIG_EXPERIMENTAL from keyboard driversKees Cook1-1/+1
This config item has not carried much meaning for a while now and is almost always enabled by default. As agreed during the Linux kernel summit, remove it. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-10-13Merge branch 'for-linus' of ↵Linus Torvalds1-1/+10
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input layer updates from Dmitry Torokhov: "2nd round of updates for the input subsystem. With it input core no longer limits number of character devices per event handler (such as evdev) to 32, but switches to dynamic minors once legacy range is exhausted. This should get multi-seat installations that currently run our of event devices very quickly. You will also get an update for Wacom driver and a couple of driver fixes." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: extend the number of event (and other) devices Input: mousedev - mark mousedev interfaces as non-seekable Input: mousedev - rename mixdev_open to opened_by_mixdev Input: mousedev - reformat structure initializers Input: mousedev - factor out psaux code to reduce #ifdefery Input: samsung-keypad - add clk_prepare and clk_unprepare Input: atmel_mxt_ts - simplify mxt_dump_message Input: wacom - clean up wacom_query_tablet_data Input: wacom - introduce wacom_fix_phy_from_hid Input: wacom - allow any multi-input Intuos device to set prox Input: wacom - report correct touch contact size for I5/Bamboo
2012-10-11Merge branch 'next' into for-linusDmitry Torokhov1-1/+10
Prepare second set of updates for 3.7 merge window (Wacom driver update and patches extending number of input minors).
2012-10-05Input: samsung-keypad - add clk_prepare and clk_unprepareThomas Abraham1-1/+10
Add calls to clk_prepare and clk_unprepare as required by commom clock framework. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-10-03Merge branch 'for-linus' of ↵Linus Torvalds5-104/+230
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: "A few drivers were updated with device tree bindings and others got a few small cleanups and fixes." Fix trivial conflict in drivers/input/keyboard/omap-keypad.c due to changes clashing with a whitespace cleanup. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (28 commits) Input: wacom - mark Intuos5 pad as in-prox when touching buttons Input: synaptics - adjust threshold for treating position values as negative Input: hgpk - use %*ph to dump small buffer Input: gpio_keys_polled - fix dt pdata->nbuttons Input: Add KD[GS]KBDIACRUC ioctls to the compatible list Input: omap-keypad - fixed formatting Input: tegra - move platform data header Input: wacom - add support for EMR on Cintiq 24HD touch Input: s3c2410_ts - make s3c_ts_pmops const Input: samsung-keypad - use of_get_child_count() helper Input: samsung-keypad - use of_match_ptr() Input: uinput - fix formatting Input: uinput - specify exact bit sizes on userspace APIs Input: uinput - mark failed submission requests as free Input: uinput - fix race that can block nonblocking read Input: uinput - return -EINVAL when read buffer size is too small Input: uinput - take event lock when fetching events from buffer Input: get rid of MATCH_BIT() macro Input: rotary-encoder - add DT bindings Input: rotary-encoder - constify platform data pointers ...
2012-10-02Merge branch 'for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wqLinus Torvalds1-2/+1
Pull workqueue changes from Tejun Heo: "This is workqueue updates for v3.7-rc1. A lot of activities this round including considerable API and behavior cleanups. * delayed_work combines a timer and a work item. The handling of the timer part has always been a bit clunky leading to confusing cancelation API with weird corner-case behaviors. delayed_work is updated to use new IRQ safe timer and cancelation now works as expected. * Another deficiency of delayed_work was lack of the counterpart of mod_timer() which led to cancel+queue combinations or open-coded timer+work usages. mod_delayed_work[_on]() are added. These two delayed_work changes make delayed_work provide interface and behave like timer which is executed with process context. * A work item could be executed concurrently on multiple CPUs, which is rather unintuitive and made flush_work() behavior confusing and half-broken under certain circumstances. This problem doesn't exist for non-reentrant workqueues. While non-reentrancy check isn't free, the overhead is incurred only when a work item bounces across different CPUs and even in simulated pathological scenario the overhead isn't too high. All workqueues are made non-reentrant. This removes the distinction between flush_[delayed_]work() and flush_[delayed_]_work_sync(). The former is now as strong as the latter and the specified work item is guaranteed to have finished execution of any previous queueing on return. * In addition to the various bug fixes, Lai redid and simplified CPU hotplug handling significantly. * Joonsoo introduced system_highpri_wq and used it during CPU hotplug. There are two merge commits - one to pull in IRQ safe timer from tip/timers/core and the other to pull in CPU hotplug fixes from wq/for-3.6-fixes as Lai's hotplug restructuring depended on them." Fixed a number of trivial conflicts, but the more interesting conflicts were silent ones where the deprecated interfaces had been used by new code in the merge window, and thus didn't cause any real data conflicts. Tejun pointed out a few of them, I fixed a couple more. * 'for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: (46 commits) workqueue: remove spurious WARN_ON_ONCE(in_irq()) from try_to_grab_pending() workqueue: use cwq_set_max_active() helper for workqueue_set_max_active() workqueue: introduce cwq_set_max_active() helper for thaw_workqueues() workqueue: remove @delayed from cwq_dec_nr_in_flight() workqueue: fix possible stall on try_to_grab_pending() of a delayed work item workqueue: use hotcpu_notifier() for workqueue_cpu_down_callback() workqueue: use __cpuinit instead of __devinit for cpu callbacks workqueue: rename manager_mutex to assoc_mutex workqueue: WORKER_REBIND is no longer necessary for idle rebinding workqueue: WORKER_REBIND is no longer necessary for busy rebinding workqueue: reimplement idle worker rebinding workqueue: deprecate __cancel_delayed_work() workqueue: reimplement cancel_delayed_work() using try_to_grab_pending() workqueue: use mod_delayed_work() instead of __cancel + queue workqueue: use irqsafe timer for delayed_work workqueue: clean up delayed_work initializers and add missing one workqueue: make deferrable delayed_work initializer names consistent workqueue: cosmetic whitespace updates for macro definitions workqueue: deprecate system_nrt[_freezable]_wq workqueue: deprecate flush[_delayed]_work_sync() ...
2012-10-02Merge tag 'multiplatform' of ↵Linus Torvalds7-7/+7
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM soc multiplatform enablement from Olof Johansson: "This is a pretty significant branch. It's the introduction of the first multiplatform support on ARM, and with this (and the later branch) merged, it is now possible to build one kernel that contains support for highbank, vexpress, mvebu, socfpga, and picoxcell. More platforms will be convered over in the next few releases. Two critical last things had to be done for this to be practical and possible: * Today each platform has its own include directory under mach-<mach>/include/mach/*, and traditionally that is where a lot of driver/platform shared definitions have gone, such as platform data structures. They now need to move out to a common location instead, and this branch moves a large number of those out to include/linux/platform_data. * Each platform used to list the device trees to compile for its boards in mach-<mach>/Makefile.boot. Both of the above changes will mean that there are some merge conflicts to come (and some to resolve here). It's a one-time move and once it settles in, we should be good for quite a while. Sorry for the overhead." Fix conflicts as per Olof. * tag 'multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (51 commits) ARM: add v7 multi-platform defconfig ARM: msm: Move core.h contents into common.h ARM: highbank: call highbank_pm_init from .init_machine ARM: dtb: move all dtb targets to common Makefile ARM: spear: move platform_data definitions ARM: samsung: move platform_data definitions ARM: orion: move platform_data definitions ARM: vexpress: convert to multi-platform ARM: initial multiplatform support ARM: mvebu: move armada-370-xp.h in mach dir ARM: vexpress: remove dependency on mach/* headers ARM: picoxcell: remove dependency on mach/* headers ARM: move all dtb targets out of Makefile.boot ARM: picoxcell: move debug macros to include/debug ARM: socfpga: move debug macros to include/debug ARM: mvebu: move debug macros to include/debug ARM: vexpress: move debug macros to include/debug ARM: highbank: move debug macros to include/debug ARM: move debug macros to common location ARM: make mach/gpio.h headers optional ...
2012-10-02Merge tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds2-122/+36
Pull ARM soc general cleanups from Olof Johansson: "This is a large branch that contains a handful of different cleanups: - Fixing up the I/O space remapping on PCI on ARM. This is a series from Rob Herring that restructures how all pci devices allocate I/O space, and it's part of the work to allow multiplatform kernels. - A number of cleanup series for OMAP, moving and removing some headers, sparse irq rework and in general preparation for multiplatform. - Final removal of all non-DT boards for Tegra, it is now device-tree-only! - Removal of a stale platform, nxp4008. It's an old mobile chipset that is no longer in use, and was very likely never really used with a mainline kernel. We have not been able to find anyone interested in keeping it around in the kernel. - Removal of the legacy dmaengine driver on tegra + A handful of other things that I haven't described above." Fix up some conflicts with the staging tree (and because nxp4008 was removed) * tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (184 commits) ARM: OMAP2+: serial: Change MAX_HSUART_PORTS to 6 ARM: OMAP4: twl-common: Support for additional devices on i2c1 bus ARM: mmp: using for_each_set_bit to simplify the code ARM: tegra: harmony: fix ldo7 regulator-name ARM: OMAP2+: Make omap4-keypad.h local ARM: OMAP2+: Make l4_3xxx.h local ARM: OMAP2+: Make l4_2xxx.h local ARM: OMAP2+: Make l3_3xxx.h local ARM: OMAP2+: Make l3_2xxx.h local ARM: OMAP1: Move irda.h from plat to mach ARM: OMAP2+: Make hdq1w.h local ARM: OMAP2+: Make gpmc-smsc911x.h local ARM: OMAP2+: Make gpmc-smc91x.h local ARM: OMAP1: Move flash.h from plat to mach ARM: OMAP2+: Make debug-devices.h local ARM: OMAP1: Move board-voiceblue.h from plat to mach ARM: OMAP1: Move board-sx1.h from plat to mach ARM: OMAP2+: Make omap-wakeupgen.h local ARM: OMAP2+: Make omap-secure.h local ARM: OMAP2+: Make ctrl_module_wkup_44xx.h local ...
generated by cgit v1.2.3 (git 2.39.0) at 2025-02-07 13:50:49 +0300