summaryrefslogtreecommitdiff
path: root/drivers/input/keyboard/omap4-keypad.c
AgeCommit message (Collapse)AuthorFilesLines
2019-01-13Input: omap-keypad - fix idle configuration to not block SoC idle statesTony Lindgren1-12/+4
[ Upstream commit e2ca26ec4f01486661b55b03597c13e2b9c18b73 ] With PM enabled, I noticed that pressing a key on the droid4 keyboard will block deeper idle states for the SoC. Let's fix this by using IRQF_ONESHOT and stop constantly toggling the device OMAP4_KBD_IRQENABLE register as suggested by Dmitry Torokhov <dmitry.torokhov@gmail.com>. From the hardware point of view, looks like we need to manage the registers for OMAP4_KBD_IRQENABLE and OMAP4_KBD_WAKEUPENABLE together to avoid blocking deeper SoC idle states. And with toggling of OMAP4_KBD_IRQENABLE register now gone with IRQF_ONESHOT, also the SoC idle state problem is gone during runtime. We still also need to clear OMAP4_KBD_WAKEUPENABLE in omap4_keypad_close() though to pair it with omap4_keypad_open() to prevent blocking deeper SoC idle states after rmmod omap4-keypad. Reported-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-12-21Input: omap-keypad - fix keyboard debounce configurationTony Lindgren1-4/+14
[ Upstream commit 6c3516fed7b61a3527459ccfa67fab130d910610 ] I noticed that the Android v3.0.8 kernel on droid4 is using different keypad values from the mainline kernel and does not have issues with keys occasionally being stuck until pressed again. Turns out there was an earlier patch posted to fix this as "Input: omap-keypad: errata i689: Correct debounce time", but it was never reposted to fix use macros for timing calculations. This updated version is using macros, and also fixes the use of the input clock rate to use 32768KiHz instead of 32000KiHz. And we want to use the known good Android kernel values of 3 and 6 instead of 2 and 6 in the earlier patch. Reported-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2015-09-29Input: omap4-keypad - fix memory leakSudip Mukherjee1-1/+1
If omap4_keypad_parse_dt() fails we returned the error code but we missed releasing keypad_data. Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-10-20input: keyboard: drop owner assignment from platform_driversWolfram Sang1-1/+0
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-05-29Input: omap-keypad - remove platform data supportJoachim Eastwood1-26/+6
This is unused since all users (OMAP4/5) are DT only. Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-01-07Input: delete non-required instances of include <linux/init.h>Paul Gortmaker1-1/+0
None of these files are actually using any __init type directives and hence don't need to include <linux/init.h>. Most are just a left over from __devinit and __cpuinit removal, or simply due to code getting copied from one driver to the next. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-08-26Input: omap-keypad - set up irq type from DTIllia Smyrnov1-2/+1
OMAP4 is DT only, so read the keypad IRQ type from DT instead hard-coding it in the driver. Signed-off-by: Illia Smyrnov <illia.smyrnov@ti.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-08-26Input: omap-keypad - enable wakeup capability for keypad.Illia Smyrnov1-0/+39
Enable/disable IRQ wake in suspend/resume handlers to make the keypad wakeup capable. Signed-off-by: Illia Smyrnov <illia.smyrnov@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-08-26Input: omap-keypad - clear interrupts on openIllia Smyrnov1-1/+2
According to TRM, the recommended way for keyboard controller initialization is clear the interrupt-status register, then set up certain keyboard events for generating an interrupt request and set up expected source of wake-up event that generates a wake-up request. Signed-off-by: Illia Smyrnov <illia.smyrnov@ti.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-08-26Input: omap-keypad - convert to threaded IRQIllia Smyrnov1-9/+20
Convert to use threaded IRQ. Signed-off-by: Illia Smyrnov <illia.smyrnov@ti.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-08-26Input: omap-keypad - use bitfiled instead of hardcoded valuesIllia Smyrnov1-14/+11
Use bitfiled instead of hardcoded values to set KBD_CTRL, use BIT macro, remove unused defines. Signed-off-by: Illia Smyrnov <illia.smyrnov@ti.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-06-28Merge branch 'for-next' of git://github.com/rydberg/linux into nextDmitry Torokhov1-11/+5
Pull in changes from Henrik: "a trivial MT documentation fix".
2013-05-08Input: omap4-keypad - remove redundant platform_set_drvdata()Sachin Kamat1-2/+0
Commit 0998d06310 (device-core: Ensure drvdata = NULL when no driver is bound) removes the need to set driver data field to NULL. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-04-05input: matrix-keymap: Add function to read the new DT bindingSimon Glass1-11/+5
We now have a binding which adds two parameters to the matrix keypad DT node. This is separate from the GPIO-driven matrix keypad binding, and unfortunately incompatible, since that uses row-gpios/col-gpios for the row and column counts. So the easiest option here is to provide a function for non-GPIO drivers to use to decode the binding. Note: We could in fact create an entirely separate structure to hold these two fields, but it does not seem worth it, yet. If we have more parameters then we can add this, and then refactor each driver to hold such a structure. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Tested-by: Sourav Poddar <sourav.poddar@ti.com> (v2) Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-24Input: remove use of __devexitBill Pemberton1-1/+1
CONFIG_HOTPLUG is going away as an option so __devexit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-24Input: remove use of __devinitBill Pemberton1-3/+3
CONFIG_HOTPLUG is going away as an option so __devinit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-11-24Input: remove use of __devexit_pBill Pemberton1-1/+1
CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-07-18Input: omap4-keypad - add device tree supportSourav Poddar1-40/+87
Add device tree support for omap4 keypad driver and update the Documentation with omap4 keypad device tree binding information. Tested on omap4430 sdp. Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-05-11Input: matrix-keymap - uninline and prepare for device tree supportDmitry Torokhov1-8/+7
Change matrix-keymap helper to be out-of-line, like sparse keymap, allow the helper perform basic keymap validation and return errors, and prepare for device tree support. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-05-11Input: omap-keypad - dynamically handle register offsetsPoddar, Sourav1-26/+92
Hi Dmitry, On Wed, May 9, 2012 at 3:14 PM, Poddar, Sourav <sourav.poddar@ti.com> wrote: > Hi Dmitry, > > I did some minor fixes to the patch which you suggested above and > the keypad is functional now. > > Changes: > - Move "pm_runtime_enable" before using "pm_runtime_get_sync". > > Sending the patch inlined..(also attached). > > From: G, Manjunath Kondaiah <manjugk@ti.com> > Date: Mon, 10 Oct 2011 20:52:05 +0530 > Subject: [PATCH] Input: omap-keypad: dynamically handle register offsets > > Keypad controller register offsets are different for omap4 > and omap5. Handle these offsets through static mapping and > assign these mappings during run time. > > Tested on omap4430 sdp with 3.4-rc3. > Tested on omap5430evm with 3.1-custom kernel. > > Cc: Andrew Morton <akpm@linux-foundation.org> > Signed-off-by: Felipe Balbi <balbi@ti.com> > Signed-off-by: G, Manjunath Kondaiah <manjugk@ti.com> > Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> > Signed-off-by: Dmitry Torokhov <dtor@mail.ru> > --- >  drivers/input/keyboard/Kconfig        |    4 +- >  drivers/input/keyboard/omap4-keypad.c |  120 +++++++++++++++++++++++++------- >  2 files changed, 95 insertions(+), 29 deletions(-) > > diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig > index f354813..33bbdee 100644 > --- a/drivers/input/keyboard/Kconfig > +++ b/drivers/input/keyboard/Kconfig > @@ -512,9 +512,9 @@ config KEYBOARD_OMAP >          module will be called omap-keypad. > >  config KEYBOARD_OMAP4 > -       tristate "TI OMAP4 keypad support" > +       tristate "TI OMAP4+ keypad support" >        help > -         Say Y here if you want to use the OMAP4 keypad. > +         Say Y here if you want to use the OMAP4+ keypad. > >          To compile this driver as a module, choose M here: the >          module will be called omap4-keypad. > diff --git a/drivers/input/keyboard/omap4-keypad.c > b/drivers/input/keyboard/omap4-keypad.c > index e809ac0..d7102e8 100644 > --- a/drivers/input/keyboard/omap4-keypad.c > +++ b/drivers/input/keyboard/omap4-keypad.c > @@ -68,19 +68,52 @@ > >  #define OMAP4_MASK_IRQSTATUSDISABLE    0xFFFF > > +enum { > +       KBD_REVISION_OMAP4 = 0, > +       KBD_REVISION_OMAP5, > +}; > + >  struct omap4_keypad { >        struct input_dev *input; > >        void __iomem *base; > -       int irq; > +       unsigned int irq; > >        unsigned int rows; >        unsigned int cols; > +       u32 reg_offset; > +       u32 irqreg_offset; >        unsigned int row_shift; >        unsigned char key_state[8]; >        unsigned short keymap[]; >  }; > > +static int kbd_readl(struct omap4_keypad *keypad_data, u32 offset) > +{ > +       return __raw_readl(keypad_data->base + > +                               keypad_data->reg_offset + offset); > +} > + > +static void kbd_writel(struct omap4_keypad *keypad_data, u32 offset, u32 value) > +{ > +       __raw_writel(value, > +                    keypad_data->base + keypad_data->reg_offset + offset); > +} > + > +static int kbd_read_irqreg(struct omap4_keypad *keypad_data, u32 offset) > +{ > +       return __raw_readl(keypad_data->base + > +                               keypad_data->irqreg_offset + offset); > +} > + > +static void kbd_write_irqreg(struct omap4_keypad *keypad_data, > +                            u32 offset, u32 value) > +{ > +       __raw_writel(value, > +                    keypad_data->base + keypad_data->irqreg_offset + offset); > +} > + > + >  /* Interrupt handler */ >  static irqreturn_t omap4_keypad_interrupt(int irq, void *dev_id) >  { > @@ -91,12 +124,11 @@ static irqreturn_t omap4_keypad_interrupt(int > irq, void *dev_id) >        u32 *new_state = (u32 *) key_state; > >        /* Disable interrupts */ > -       __raw_writel(OMAP4_VAL_IRQDISABLE, > -                    keypad_data->base + OMAP4_KBD_IRQENABLE); > +       kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE, > +                        OMAP4_VAL_IRQDISABLE); > > -       *new_state = __raw_readl(keypad_data->base + OMAP4_KBD_FULLCODE31_0); > -       *(new_state + 1) = __raw_readl(keypad_data->base > -                                               + OMAP4_KBD_FULLCODE63_32); > +       *new_state = kbd_readl(keypad_data, OMAP4_KBD_FULLCODE31_0); > +       *(new_state + 1) = kbd_readl(keypad_data, OMAP4_KBD_FULLCODE63_32); > >        for (row = 0; row < keypad_data->rows; row++) { >                changed = key_state[row] ^ keypad_data->key_state[row]; > @@ -121,12 +153,13 @@ static irqreturn_t omap4_keypad_interrupt(int > irq, void *dev_id) >                sizeof(keypad_data->key_state)); > >        /* clear pending interrupts */ > -       __raw_writel(__raw_readl(keypad_data->base + OMAP4_KBD_IRQSTATUS), > -                       keypad_data->base + OMAP4_KBD_IRQSTATUS); > +       kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS, > +                        kbd_read_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS)); > >        /* enable interrupts */ > -       __raw_writel(OMAP4_DEF_IRQENABLE_EVENTEN | OMAP4_DEF_IRQENABLE_LONGKEY, > -                       keypad_data->base + OMAP4_KBD_IRQENABLE); > +       kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE, > +               OMAP4_DEF_IRQENABLE_EVENTEN | > +                               OMAP4_DEF_IRQENABLE_LONGKEY); > >        return IRQ_HANDLED; >  } > @@ -139,16 +172,17 @@ static int omap4_keypad_open(struct input_dev *input) > >        disable_irq(keypad_data->irq); > > -       __raw_writel(OMAP4_VAL_FUNCTIONALCFG, > -                       keypad_data->base + OMAP4_KBD_CTRL); > -       __raw_writel(OMAP4_VAL_DEBOUNCINGTIME, > -                       keypad_data->base + OMAP4_KBD_DEBOUNCINGTIME); > -       __raw_writel(OMAP4_VAL_IRQDISABLE, > -                       keypad_data->base + OMAP4_KBD_IRQSTATUS); > -       __raw_writel(OMAP4_DEF_IRQENABLE_EVENTEN | OMAP4_DEF_IRQENABLE_LONGKEY, > -                       keypad_data->base + OMAP4_KBD_IRQENABLE); > -       __raw_writel(OMAP4_DEF_WUP_EVENT_ENA | OMAP4_DEF_WUP_LONG_KEY_ENA, > -                       keypad_data->base + OMAP4_KBD_WAKEUPENABLE); > +       kbd_writel(keypad_data, OMAP4_KBD_CTRL, > +                       OMAP4_VAL_FUNCTIONALCFG); > +       kbd_writel(keypad_data, OMAP4_KBD_DEBOUNCINGTIME, > +                       OMAP4_VAL_DEBOUNCINGTIME); > +       kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS, > +                       OMAP4_VAL_IRQDISABLE); > +       kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE, > +                       OMAP4_DEF_IRQENABLE_EVENTEN | > +                               OMAP4_DEF_IRQENABLE_LONGKEY); > +       kbd_writel(keypad_data, OMAP4_KBD_WAKEUPENABLE, > +                       OMAP4_DEF_WUP_EVENT_ENA | OMAP4_DEF_WUP_LONG_KEY_ENA); > >        enable_irq(keypad_data->irq); > > @@ -162,12 +196,12 @@ static void omap4_keypad_close(struct input_dev *input) >        disable_irq(keypad_data->irq); > >        /* Disable interrupts */ > -       __raw_writel(OMAP4_VAL_IRQDISABLE, > -                    keypad_data->base + OMAP4_KBD_IRQENABLE); > +       kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE, > +                        OMAP4_VAL_IRQDISABLE); > >        /* clear pending interrupts */ > -       __raw_writel(__raw_readl(keypad_data->base + OMAP4_KBD_IRQSTATUS), > -                       keypad_data->base + OMAP4_KBD_IRQSTATUS); > +       kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS, > +                        kbd_read_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS)); > >        enable_irq(keypad_data->irq); > > @@ -182,6 +216,7 @@ static int __devinit omap4_keypad_probe(struct > platform_device *pdev) >        struct resource *res; >        resource_size_t size; >        unsigned int row_shift, max_keys; > +       int rev; >        int irq; >        int error; > > @@ -241,11 +276,40 @@ static int __devinit omap4_keypad_probe(struct > platform_device *pdev) >        keypad_data->rows = pdata->rows; >        keypad_data->cols = pdata->cols; > > +       /* > +       * Enable clocks for the keypad module so that we can read > +       * revision register. > +       */ > +       pm_runtime_enable(&pdev->dev); > +       error = pm_runtime_get_sync(&pdev->dev); > +       if (error) { > +               dev_err(&pdev->dev, "pm_runtime_get_sync() failed\n"); > +               goto err_unmap; > +       } > +       rev = __raw_readl(keypad_data->base + OMAP4_KBD_REVISION); > +       rev &= 0x03 << 30; > +       rev >>= 30; > +       switch (rev) { > +       case KBD_REVISION_OMAP4: > +               keypad_data->reg_offset = 0x00; > +               keypad_data->irqreg_offset = 0x00; > +               break; > +       case KBD_REVISION_OMAP5: > +               keypad_data->reg_offset = 0x10; > +               keypad_data->irqreg_offset = 0x0c; > +               break; > +       default: > +               dev_err(&pdev->dev, > +                       "Keypad reports unsupported revision %d", rev); > +               error = -EINVAL; > +               goto err_pm_put_sync; > +       } > + >        /* input device allocation */ >        keypad_data->input = input_dev = input_allocate_device(); >        if (!input_dev) { >                error = -ENOMEM; > -               goto err_unmap; > +               goto err_pm_put_sync; >        } > >        input_dev->name = pdev->name; > @@ -273,14 +337,14 @@ static int __devinit omap4_keypad_probe(struct > platform_device *pdev) >                        input_dev->keycode, input_dev->keybit); > >        error = request_irq(keypad_data->irq, omap4_keypad_interrupt, > -                            IRQF_TRIGGER_RISING, > +                           IRQF_DISABLED | IRQF_TRIGGER_RISING, Sorry, " IRQF_DISABLED" got included by mistake. Removing this stray change and sending it again. >                             "omap4-keypad", keypad_data); >        if (error) { >                dev_err(&pdev->dev, "failed to register interrupt\n"); >                goto err_free_input; >        } > > -       pm_runtime_enable(&pdev->dev); > +       pm_runtime_put_sync(&pdev->dev); > >        error = input_register_device(keypad_data->input); >        if (error < 0) { > @@ -296,6 +360,8 @@ err_pm_disable: >        free_irq(keypad_data->irq, keypad_data); >  err_free_input: >        input_free_device(input_dev); > +err_pm_put_sync: > +       pm_runtime_put_sync(&pdev->dev); >  err_unmap: >        iounmap(keypad_data->base); >  err_release_mem: > > > ~Sourav > > On Wed, May 9, 2012 at 1:15 PM, Dmitry Torokhov > <dmitry.torokhov@gmail.com> wrote: >>> Hi Dmitry , >>> >>> >>> On Wed, May 9, 2012 at 10:48 AM, Dmitry Torokhov >>> <dmitry.torokhov@gmail.com> wrote: >>> > Ho Sourav, >>> > >>> > On Thu, Apr 26, 2012 at 11:24:37AM +0530, Sourav Poddar wrote: >>> >> >>> >> -config KEYBOARD_OMAP4 >>> >> -     tristate "TI OMAP4 keypad support" >>> >> +config KEYBOARD_OMAP4+ >>> > >>> > I think this works purely by accident - '+' sign getting dropped by >>> > parser... >>> > >>> >> @@ -139,16 +192,33 @@ static int omap4_keypad_open(struct input_dev *input) >>> >> >>> >>       disable_irq(keypad_data->irq); >>> >> >>> >> -     __raw_writel(OMAP4_VAL_FUNCTIONALCFG, >>> >> -                     keypad_data->base + OMAP4_KBD_CTRL); >>> >> -     __raw_writel(OMAP4_VAL_DEBOUNCINGTIME, >>> >> -                     keypad_data->base + OMAP4_KBD_DEBOUNCINGTIME); >>> >> -     __raw_writel(OMAP4_VAL_IRQDISABLE, >>> >> -                     keypad_data->base + OMAP4_KBD_IRQSTATUS); >>> >> -     __raw_writel(OMAP4_DEF_IRQENABLE_EVENTEN | OMAP4_DEF_IRQENABLE_LONGKEY, >>> >> -                     keypad_data->base + OMAP4_KBD_IRQENABLE); >>> >> -     __raw_writel(OMAP4_DEF_WUP_EVENT_ENA | OMAP4_DEF_WUP_LONG_KEY_ENA, >>> >> -                     keypad_data->base + OMAP4_KBD_WAKEUPENABLE); >>> >> +     keypad_data->revision = kbd_read_revision(keypad_data, >>> >> +                     OMAP4_KBD_REVISION); >>> >> +     switch (keypad_data->revision) { >>> >> +     case 1: >>> >> +             keypad_data->irqstatus = OMAP4_KBD_IRQSTATUS + 0x0c; >>> >> +             keypad_data->irqenable = OMAP4_KBD_IRQENABLE + 0x0c; >>> >> +             keypad_data->reg_offset = 0x10; >>> >> +             break; >>> > >>> > This should be done in probe(). >>> > >>> Dont we then require "pm_runtime_put_sync" in probe, since we are trying >>> to read the keypad revision register.? >> >> Ah, indeed, but I think not pm_runtime_get_sync() but >> pm_runtime_set_active(). >> >> Not sure if this will fix the crash... >> >> -- >> Dmitry >> >> >> Input: omap-keypad - dynamically handle register offsets >> >> From: G, Manjunath Kondaiah <manjugk@ti.com> >> >> Keypad controller register offsets are different for omap4 >> and omap5. Handle these offsets through static mapping and >> assign these mappings during run time. >> >> Tested on omap4430 sdp with 3.4-rc3. >> Tested on omap5430evm with 3.1-custom kernel. >> >> Signed-off-by: Felipe Balbi <balbi@ti.com> >> Signed-off-by: G, Manjunath Kondaiah <manjugk@ti.com> >> Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> >> Signed-off-by: Dmitry Torokhov <dtor@mail.ru> >> --- >> >>  drivers/input/keyboard/Kconfig        |    4 + >>  drivers/input/keyboard/omap4-keypad.c |  117 ++++++++++++++++++++++++++------- >>  2 files changed, 94 insertions(+), 27 deletions(-) >> >> >> diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig >> index 20a3753..84ee155 100644 >> --- a/drivers/input/keyboard/Kconfig >> +++ b/drivers/input/keyboard/Kconfig >> @@ -531,9 +531,9 @@ config KEYBOARD_OMAP >>          module will be called omap-keypad. >> >>  config KEYBOARD_OMAP4 >> -       tristate "TI OMAP4 keypad support" >> +       tristate "TI OMAP4+ keypad support" >>        help >> -         Say Y here if you want to use the OMAP4 keypad. >> +         Say Y here if you want to use the OMAP4+ keypad. >> >>          To compile this driver as a module, choose M here: the >>          module will be called omap4-keypad. >> diff --git a/drivers/input/keyboard/omap4-keypad.c b/drivers/input/keyboard/omap4-keypad.c >> index e809ac0..c9fd0df 100644 >> --- a/drivers/input/keyboard/omap4-keypad.c >> +++ b/drivers/input/keyboard/omap4-keypad.c >> @@ -68,19 +68,52 @@ >> >>  #define OMAP4_MASK_IRQSTATUSDISABLE    0xFFFF >> >> +enum { >> +       KBD_REVISION_OMAP4 = 0, >> +       KBD_REVISION_OMAP5, >> +}; >> + >>  struct omap4_keypad { >>        struct input_dev *input; >> >>        void __iomem *base; >> -       int irq; >> +       unsigned int irq; >> >>        unsigned int rows; >>        unsigned int cols; >> +       u32 reg_offset; >> +       u32 irqreg_offset; >>        unsigned int row_shift; >>        unsigned char key_state[8]; >>        unsigned short keymap[]; >>  }; >> >> +static int kbd_readl(struct omap4_keypad *keypad_data, u32 offset) >> +{ >> +       return __raw_readl(keypad_data->base + >> +                               keypad_data->reg_offset + offset); >> +} >> + >> +static void kbd_writel(struct omap4_keypad *keypad_data, u32 offset, u32 value) >> +{ >> +       __raw_writel(value, >> +                    keypad_data->base + keypad_data->reg_offset + offset); >> +} >> + >> +static int kbd_read_irqreg(struct omap4_keypad *keypad_data, u32 offset) >> +{ >> +       return __raw_readl(keypad_data->base + >> +                               keypad_data->irqreg_offset + offset); >> +} >> + >> +static void kbd_write_irqreg(struct omap4_keypad *keypad_data, >> +                            u32 offset, u32 value) >> +{ >> +       __raw_writel(value, >> +                    keypad_data->base + keypad_data->irqreg_offset + offset); >> +} >> + >> + >>  /* Interrupt handler */ >>  static irqreturn_t omap4_keypad_interrupt(int irq, void *dev_id) >>  { >> @@ -91,12 +124,11 @@ static irqreturn_t omap4_keypad_interrupt(int irq, void *dev_id) >>        u32 *new_state = (u32 *) key_state; >> >>        /* Disable interrupts */ >> -       __raw_writel(OMAP4_VAL_IRQDISABLE, >> -                    keypad_data->base + OMAP4_KBD_IRQENABLE); >> +       kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE, >> +                        OMAP4_VAL_IRQDISABLE); >> >> -       *new_state = __raw_readl(keypad_data->base + OMAP4_KBD_FULLCODE31_0); >> -       *(new_state + 1) = __raw_readl(keypad_data->base >> -                                               + OMAP4_KBD_FULLCODE63_32); >> +       *new_state = kbd_readl(keypad_data, OMAP4_KBD_FULLCODE31_0); >> +       *(new_state + 1) = kbd_readl(keypad_data, OMAP4_KBD_FULLCODE63_32); >> >>        for (row = 0; row < keypad_data->rows; row++) { >>                changed = key_state[row] ^ keypad_data->key_state[row]; >> @@ -121,12 +153,13 @@ static irqreturn_t omap4_keypad_interrupt(int irq, void *dev_id) >>                sizeof(keypad_data->key_state)); >> >>        /* clear pending interrupts */ >> -       __raw_writel(__raw_readl(keypad_data->base + OMAP4_KBD_IRQSTATUS), >> -                       keypad_data->base + OMAP4_KBD_IRQSTATUS); >> +       kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS, >> +                        kbd_read_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS)); >> >>        /* enable interrupts */ >> -       __raw_writel(OMAP4_DEF_IRQENABLE_EVENTEN | OMAP4_DEF_IRQENABLE_LONGKEY, >> -                       keypad_data->base + OMAP4_KBD_IRQENABLE); >> +       kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE, >> +               OMAP4_DEF_IRQENABLE_EVENTEN | >> +                               OMAP4_DEF_IRQENABLE_LONGKEY); >> >>        return IRQ_HANDLED; >>  } >> @@ -139,16 +172,17 @@ static int omap4_keypad_open(struct input_dev *input) >> >>        disable_irq(keypad_data->irq); >> >> -       __raw_writel(OMAP4_VAL_FUNCTIONALCFG, >> -                       keypad_data->base + OMAP4_KBD_CTRL); >> -       __raw_writel(OMAP4_VAL_DEBOUNCINGTIME, >> -                       keypad_data->base + OMAP4_KBD_DEBOUNCINGTIME); >> -       __raw_writel(OMAP4_VAL_IRQDISABLE, >> -                       keypad_data->base + OMAP4_KBD_IRQSTATUS); >> -       __raw_writel(OMAP4_DEF_IRQENABLE_EVENTEN | OMAP4_DEF_IRQENABLE_LONGKEY, >> -                       keypad_data->base + OMAP4_KBD_IRQENABLE); >> -       __raw_writel(OMAP4_DEF_WUP_EVENT_ENA | OMAP4_DEF_WUP_LONG_KEY_ENA, >> -                       keypad_data->base + OMAP4_KBD_WAKEUPENABLE); >> +       kbd_writel(keypad_data, OMAP4_KBD_CTRL, >> +                       OMAP4_VAL_FUNCTIONALCFG); >> +       kbd_writel(keypad_data, OMAP4_KBD_DEBOUNCINGTIME, >> +                       OMAP4_VAL_DEBOUNCINGTIME); >> +       kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS, >> +                       OMAP4_VAL_IRQDISABLE); >> +       kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE, >> +                       OMAP4_DEF_IRQENABLE_EVENTEN | >> +                               OMAP4_DEF_IRQENABLE_LONGKEY); >> +       kbd_writel(keypad_data, OMAP4_KBD_WAKEUPENABLE, >> +                       OMAP4_DEF_WUP_EVENT_ENA | OMAP4_DEF_WUP_LONG_KEY_ENA); >> >>        enable_irq(keypad_data->irq); >> >> @@ -162,12 +196,12 @@ static void omap4_keypad_close(struct input_dev *input) >>        disable_irq(keypad_data->irq); >> >>        /* Disable interrupts */ >> -       __raw_writel(OMAP4_VAL_IRQDISABLE, >> -                    keypad_data->base + OMAP4_KBD_IRQENABLE); >> +       kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE, >> +                        OMAP4_VAL_IRQDISABLE); >> >>        /* clear pending interrupts */ >> -       __raw_writel(__raw_readl(keypad_data->base + OMAP4_KBD_IRQSTATUS), >> -                       keypad_data->base + OMAP4_KBD_IRQSTATUS); >> +       kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS, >> +                        kbd_read_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS)); >> >>        enable_irq(keypad_data->irq); >> >> @@ -182,6 +216,7 @@ static int __devinit omap4_keypad_probe(struct platform_device *pdev) >>        struct resource *res; >>        resource_size_t size; >>        unsigned int row_shift, max_keys; >> +       int rev; >>        int irq; >>        int error; >> >> @@ -241,11 +276,40 @@ static int __devinit omap4_keypad_probe(struct platform_device *pdev) >>        keypad_data->rows = pdata->rows; >>        keypad_data->cols = pdata->cols; >> >> +       /* >> +        * Mark device as active (and wake up its parent) so we can read >> +        * revision register. >> +        */ >> +       error = pm_runtime_set_active(&pdev->dev); >> +       if (error) { >> +               dev_err(&pdev->dev, "pm_runtime_set_active() failed\n"); >> +               goto err_unmap; >> +       } >> + >> +       rev = __raw_readl(keypad_data->base + OMAP4_KBD_REVISION); >> +       rev &= 0x03 << 30; >> +       rev >>= 30; >> +       switch (rev) { >> +       case KBD_REVISION_OMAP4: >> +               keypad_data->reg_offset = 0x00; >> +               keypad_data->irqreg_offset = 0x00; >> +               break; >> +       case KBD_REVISION_OMAP5: >> +               keypad_data->reg_offset = 0x10; >> +               keypad_data->irqreg_offset = 0x0c; >> +               break; >> +       default: >> +               dev_err(&pdev->dev, >> +                       "Keypad reports unsupported revision %d", rev); >> +               error = -EINVAL; >> +               goto err_pm_suspended; >> +       } >> + >>        /* input device allocation */ >>        keypad_data->input = input_dev = input_allocate_device(); >>        if (!input_dev) { >>                error = -ENOMEM; >> -               goto err_unmap; >> +               goto err_pm_suspended; >>        } >> >>        input_dev->name = pdev->name; >> @@ -281,6 +345,7 @@ static int __devinit omap4_keypad_probe(struct platform_device *pdev) >>        } >> >>        pm_runtime_enable(&pdev->dev); >> +       pm_runtime_put_sync(&pdev->dev); >> >>        error = input_register_device(keypad_data->input); >>        if (error < 0) { >> @@ -296,6 +361,8 @@ err_pm_disable: >>        free_irq(keypad_data->irq, keypad_data); >>  err_free_input: >>        input_free_device(input_dev); >> +err_pm_suspended: >> +       pm_runtime_set_suspended(&pdev->dev); >>  err_unmap: >>        iounmap(keypad_data->base); >>  err_release_mem: From: G, Manjunath Kondaiah <manjugk@ti.com> Date: Mon, 10 Oct 2011 20:52:05 +0530 Subject: [PATCH] Input: omap-keypad: dynamically handle register offsets Keypad controller register offsets are different for omap4 and omap5. Handle these offsets through static mapping and assign these mappings during run time. Tested on omap4430 sdp with 3.4-rc3. Tested on omap5430evm with 3.1-custom kernel. Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: G, Manjunath Kondaiah <manjugk@ti.com> Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-03-17Input: omap4-keypad - move platform_data to <linux/platform_data>Felipe Balbi1-1/+1
This patch allows us to drop the OMAP dependency from the OMAP4 keypad driver. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-12-01Input: keyboard - use macro module_platform_driver()JJ Ding1-12/+1
Commit 940ab88962bc1aff3273a8356d64577a6e386736 introduced a new macro to save some platform_driver boilerplate code. Use it. Signed-off-by: JJ Ding <dgdunix@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-02-24Input: omap4-keypad - wire up runtime PM handlingAbraham Arce1-19/+55
Enable Runtime PM functionality in OMAP4 driver based on the following assumptions: - keyboard controller in wakeup domain so it is always on and power impact is minimal; - in OMAP4 the device control is at module/device level and ick/fclk level control is difficult so cutting of clocks will prevent interrupts. Signed-off-by: Abraham Arce <x0066660@ti.com> Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-10-13Input: omap4-keypad - wake-up on events & long pressesMike Turquette1-0/+4
Program keyboard controller to generate a wake-up request on events and on long key presses. It will not generate wake-up requests on timeouts since driver code does not handle them. This allows keyboard to wake-up OMAP from suspend. Signed-off-by: Mike Turquette <mturquette@ti.com> Signed-off-by: Abraham Arce <x0066660@ti.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-10-13Input: omap4-keypad - fix interrupt line configurationAbraham Arce1-1/+1
Select correct interrupt line behaviour. Signed-off-by: Abraham Arce <x0066660@ti.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-10-13Input: omap4-keypad - SYSCONFIG register configurationAbraham Arce1-8/+5
Remove SYSCONFIG register configuration, omap hwmod framework will use internal API to modify as required. Other minor updates: - Change a variable name from DEF to VAL, this represents a value - Break line width to 80 characters Signed-off-by: Abraham Arce <x0066660@ti.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-10-13Input: omap4-keypad - use platform device helpersAbraham Arce1-5/+35
Get mem and irq resources using platform helpers - platform_get_base - platform_get_irq Signed-off-by: Abraham Arce <x0066660@ti.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-09-01Input: add support for OMAP4 keyboard controllerAbraham Arce1-0/+287
OMAP4 keyboard controller includes: - built-in scanning algorithm - debouncing feature Driver implementation is based on matrix_keypad.c Signed-off-by: Syed Rafiuddin <rafiuddin.syed@ti.com> Signed-off-by: Abraham Arce <x0066660@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>