| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
all failure exits prior to fdget() leave the scope, all matching fdput()
are immediately followed by leaving the scope.
[xfs_ioc_commit_range() chunk moved here as well]
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Set port link speed and width based on max bandwidth acquired from the
device instead of using constant 100 Gbps. Use a default value in case
the device didn't set the field.
Reviewed-by: Daniel Kranzdorf <dkkranzd@amazon.com>
Reviewed-by: Firas Jahjah <firasj@amazon.com>
Signed-off-by: Michael Margolin <mrgolin@amazon.com>
Link: https://patch.msgid.link/20241030093006.21352-1-mrgolin@amazon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Invalidate rkey is cpu endian and immediate data is in big endian format.
Both immediate data and invalidate the remote key returned by
HW is in little endian format.
While handling the commit in fixes tag, the difference between
immediate data and invalidate rkey endianness was not considered.
Without changes of this patch, Kernel ULP was failing while processing
inv_rkey.
dmesg log snippet -
nvme nvme0: Bogus remote invalidation for rkey 0x2000019Fix in this patch
Do endianness conversion based on completion queue entry flag.
Also, the HW completions are already converted to host endianness in
bnxt_qplib_cq_process_res_rc and bnxt_qplib_cq_process_res_ud and there
is no need to convert it again in bnxt_re_poll_cq. Modified the union to
hold the correct data type.
Fixes: 95b087f87b78 ("bnxt_re: Fix imm_data endianness")
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/1730110014-20755-1-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
When the qp is in error state, the status of WQEs in the queue should be
set to error. Or else the following will appear.
[ 920.617269] WARNING: CPU: 1 PID: 21 at drivers/infiniband/sw/rxe/rxe_comp.c:756 rxe_completer+0x989/0xcc0 [rdma_rxe]
[ 920.617744] Modules linked in: rnbd_client(O) rtrs_client(O) rtrs_core(O) rdma_ucm rdma_cm iw_cm ib_cm crc32_generic rdma_rxe ip6_udp_tunnel udp_tunnel ib_uverbs ib_core loop brd null_blk ipv6
[ 920.618516] CPU: 1 PID: 21 Comm: ksoftirqd/1 Tainted: G O 6.1.113-storage+ #65
[ 920.618986] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
[ 920.619396] RIP: 0010:rxe_completer+0x989/0xcc0 [rdma_rxe]
[ 920.619658] Code: 0f b6 84 24 3a 02 00 00 41 89 84 24 44 04 00 00 e9 2a f7 ff ff 39 ca bb 03 00 00 00 b8 0e 00 00 00 48 0f 45 d8 e9 15 f7 ff ff <0f> 0b e9 cb f8 ff ff 41 bf f5 ff ff ff e9 08 f8 ff ff 49 8d bc 24
[ 920.620482] RSP: 0018:ffff97b7c00bbc38 EFLAGS: 00010246
[ 920.620817] RAX: 0000000000000000 RBX: 000000000000000c RCX: 0000000000000008
[ 920.621183] RDX: ffff960dc396ebc0 RSI: 0000000000005400 RDI: ffff960dc4e2fbac
[ 920.621548] RBP: 0000000000000000 R08: 0000000000000001 R09: ffffffffac406450
[ 920.621884] R10: ffffffffac4060c0 R11: 0000000000000001 R12: ffff960dc4e2f800
[ 920.622254] R13: ffff960dc4e2f928 R14: ffff97b7c029c580 R15: 0000000000000000
[ 920.622609] FS: 0000000000000000(0000) GS:ffff960ef7d00000(0000) knlGS:0000000000000000
[ 920.622979] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 920.623245] CR2: 00007fa056965e90 CR3: 00000001107f1000 CR4: 00000000000006e0
[ 920.623680] Call Trace:
[ 920.623815] <TASK>
[ 920.623933] ? __warn+0x79/0xc0
[ 920.624116] ? rxe_completer+0x989/0xcc0 [rdma_rxe]
[ 920.624356] ? report_bug+0xfb/0x150
[ 920.624594] ? handle_bug+0x3c/0x60
[ 920.624796] ? exc_invalid_op+0x14/0x70
[ 920.624976] ? asm_exc_invalid_op+0x16/0x20
[ 920.625203] ? rxe_completer+0x989/0xcc0 [rdma_rxe]
[ 920.625474] ? rxe_completer+0x329/0xcc0 [rdma_rxe]
[ 920.625749] rxe_do_task+0x80/0x110 [rdma_rxe]
[ 920.626037] rxe_requester+0x625/0xde0 [rdma_rxe]
[ 920.626310] ? rxe_cq_post+0xe2/0x180 [rdma_rxe]
[ 920.626583] ? do_complete+0x18d/0x220 [rdma_rxe]
[ 920.626812] ? rxe_completer+0x1a3/0xcc0 [rdma_rxe]
[ 920.627050] rxe_do_task+0x80/0x110 [rdma_rxe]
[ 920.627285] tasklet_action_common.constprop.0+0xa4/0x120
[ 920.627522] handle_softirqs+0xc2/0x250
[ 920.627728] ? sort_range+0x20/0x20
[ 920.627942] run_ksoftirqd+0x1f/0x30
[ 920.628158] smpboot_thread_fn+0xc7/0x1b0
[ 920.628334] kthread+0xd6/0x100
[ 920.628504] ? kthread_complete_and_exit+0x20/0x20
[ 920.628709] ret_from_fork+0x1f/0x30
[ 920.628892] </TASK>
Fixes: ae720bdb703b ("RDMA/rxe: Generate error completion for error requester QP state")
Signed-off-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Link: https://patch.msgid.link/20241025152036.121417-1-yanjun.zhu@linux.dev
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
During reset, cmd to destroy resources such as qp, cq, and mr may fail,
and error logs will be printed. When a large number of resources are
destroyed, there will be lots of printings, and it may lead to a cpu
stuck.
Delete some unnecessary printings and replace other printing functions
in these paths with the ratelimited version.
Fixes: 9a4435375cd1 ("IB/hns: Add driver files for hns RoCE driver")
Fixes: c7bcb13442e1 ("RDMA/hns: Add SRQ support for hip08 kernel mode")
Fixes: 70f92521584f ("RDMA/hns: Use the reserved loopback QPs to free MR before destroying MPT")
Fixes: 926a01dc000d ("RDMA/hns: Add QP operations support for hip08 SoC")
Signed-off-by: wenglianfa <wenglianfa@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20241024124000.2931869-6-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
The hem code is executed before ib_dev is registered, so use dev_*
printing instead of ibdev_* to avoid log like this:
(null): set HEM address to HW failed!
Fixes: 2f49de21f3e9 ("RDMA/hns: Optimize mhop get flow for multi-hop addressing")
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20241024124000.2931869-5-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
The sub-directory of hns_roce debugfs is named after the device's
kernel name currently, but it will be inconvenient to use when
the device is renamed.
Modify the name to pci name as users can always easily find the
correspondence between an RDMA device and its pci name.
Fixes: eb7854d63db5 ("RDMA/hns: Support SW stats with debugfs")
Signed-off-by: Yuyu Li <liyuyu6@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20241024124000.2931869-4-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
QP needs to be modified to IB_QPS_ERROR to trigger HW flush cqe. But
when this process races with destroy qp, the destroy-qp process may
modify the QP to IB_QPS_RESET first. In this case flush cqe will fail
since it is invalid to modify qp from IB_QPS_RESET to IB_QPS_ERROR.
Add lock and bit flag to make sure pending flush cqe work is completed
first and no more new works will be added.
Fixes: ffd541d45726 ("RDMA/hns: Add the workqueue framework for flush cqe handler")
Signed-off-by: wenglianfa <wenglianfa@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20241024124000.2931869-3-huangjunxian6@hisilicon.com
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
eq_db_ci is updated only after all AEQEs are processed in the AEQ
interrupt handler, which is not timely enough and may result in
AEQ overflow. Two optimization methods are proposed:
1. Set an upper limit for AEQE processing.
2. Move time-consuming operations such as printings to the bottom
half of the interrupt.
cmd events and flush_cqe events are still fully processed in the top half
to ensure timely handling.
Fixes: a5073d6054f7 ("RDMA/hns: Add eq support of hip08")
Signed-off-by: wenglianfa <wenglianfa@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20241024124000.2931869-2-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Avoids having to manually increment the pointer.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://patch.msgid.link/20241021011543.5922-1-rosenp@gmail.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Access flag definition in MR and QP is different
in FW. Currently both reg/bind MR and modify/query QP uses
the same flags. Add a different function to map
the QP access flags for newer adapters.
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Hongguang Gao <hongguang.gao@broadcom.com>
Reviewed-by: Damodharam Ammepalli <damodharam.ammepalli@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/1729065346-1364-6-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Adds support for modify_device in the driver
for node desc changes.
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/1729065346-1364-5-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
RoCE message rate performance is heavily degraded
without the use of cq coalescing. With proper coalescing,
message rates get better. Furthermore, coalescing
significantly reduces contention on the PCIe Root
Complex/Memory subsystems.
Add the changes to configure CQ rx colascing parameters
based on adapter revision when CQ is created.
Signed-off-by: Chandramohan Akula <chandramohan.akula@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/1729065346-1364-4-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Modify QP improvements are for state transitions
from INIT -> RTR and RTR -> RTS.
In order to support the Modify QP Optimization feature,
the driver is expected to check for the feature support
in the CMDQ_QUERY_FUNC and register its support for this
feature with the FW in CMDQ_INITIALIZE_FIRMWARE.
Additionally, the driver is required to specify the new
fields and attribute masks for the transitions as follows:
1. INIT -> RTR:
- New fields: srq_used, type.
- enable srq_used when RC QP is configured to use SRQ.
- set the type based on the QP type.
- Mandatory masks:
- RC: CMDQ_MODIFY_QP_MODIFY_MASK_ACCESS,
CMDQ_MODIFY_QP_MODIFY_MASK_PKEY
- UD QP and QP1: CMDQ_MODIFY_QP_MODIFY_MASK_PKEY,
CMDQ_MODIFY_QP_MODIFY_MASK_QKEY
2. RTR -> RTS:
- New fields: type
- set the type based on the QP type.
- Mandatory masks:
- RC: CMDQ_MODIFY_QP_MODIFY_MASK_ACCESS
- UD QP and QP1: CMDQ_MODIFY_QP_MODIFY_MASK_QKEY
Reviewed-by: Saravanan Vajravel <saravanan.vajravel@broadcom.com>
Reviewed-by: Tushar Rane <tushar.rane@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/1729065346-1364-2-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
There is no need for a special txqueuelen value for IPoIB.
This value represents the qdisc size which is not related to the SQ
size, and the default value provided by the stack (DEFAULT_TX_QUEUE_LEN)
is sufficient for typical use cases.
Signed-off-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/cc97764b5a8def4ea879b371549a5867fe75c756.1728555243.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Using modify QP with AH attributes and IB_QP_AV flag set doesn't make
much sense for connectionless QP types like SRD. Add SL parameter to EFA
create QP user ABI and pass it to the device.
Link: https://patch.msgid.link/r/20241015174242.3490-3-mrgolin@amazon.com
Reviewed-by: Firas Jahjah <firasj@amazon.com>
Reviewed-by: Yonatan Nachum <ynachum@amazon.com>
Signed-off-by: Michael Margolin <mrgolin@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Update device interface header files.
Link: https://patch.msgid.link/r/20241015174242.3490-2-mrgolin@amazon.com
Reviewed-by: Daniel Kranzdorf <dkkranzd@amazon.com>
Reviewed-by: Yonatan Nachum <ynachum@amazon.com>
Signed-off-by: Michael Margolin <mrgolin@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
There is a race between the CREQ tasklet and destroy qp when accessing the
qp-handle table. There is a chance of reading a valid qp-handle in the
CREQ tasklet handler while the QP is already moving ahead with the
destruction.
Fixing this race by implementing a table-lock to synchronize the access.
Fixes: f218d67ef004 ("RDMA/bnxt_re: Allow posting when QPs are in error")
Fixes: 84cf229f4001 ("RDMA/bnxt_re: Fix the qp table indexing")
Link: https://patch.msgid.link/r/1728912975-19346-3-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Control path completion processing always runs in tasklet context. To
synchronize with the posting thread, there is no need to use the irq
variant of spin lock. Use spin_lock_bh instead.
Fixes: 1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver")
Link: https://patch.msgid.link/r/1728912975-19346-2-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
After the cited commit below max_dest_rd_atomic and max_rd_atomic values
are being rounded down to the next power of 2. As opposed to the old
behavior and mlx4 driver where they used to be rounded up instead.
In order to stay consistent with older code and other drivers, revert to
using fls round function which rounds up to the next power of 2.
Fixes: f18e26af6aba ("RDMA/mlx5: Convert modify QP to use MLX5_SET macros")
Link: https://patch.msgid.link/r/d85515d6ef21a2fa8ef4c8293dce9b58df8a6297.1728550179.git.leon@kernel.org
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Maher Sanalla <msanalla@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Restore the missing functionality to dump vendor specific QP details,
which was mistakenly removed in the commit mentioned in Fixes line.
Fixes: 5cc34116ccec ("RDMA: Add dedicated QP resource tracker function")
Link: https://patch.msgid.link/r/ed9844829135cfdcac7d64285688195a5cd43f82.1728323026.git.leonro@nvidia.com
Reported-by: Dr. David Alan Gilbert <linux@treblig.org>
Closes: https://lore.kernel.org/all/Zv_4qAxuC0dLmgXP@gallifrey
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
GID table length is reported by FW. The gid index which is passed to the
driver during modify_qp/create_ah is restricted by the sgid_index field of
struct ib_global_route. sgid_index is u8 and the max sgid possible is
256.
Each GID entry in HW will have 2 GID entries in the kernel gid table. So
we can support twice the gid table size reported by FW. Also, restrict the
max GID to 256 also.
Fixes: 847b97887ed4 ("RDMA/bnxt_re: Restrict the max_gids to 256")
Link: https://patch.msgid.link/r/1728373302-19530-11-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Avoid memory corruption while setting up Level-2 PBL pages for the non MR
resources when num_pages > 256K.
There will be a single PDE page address (contiguous pages in the case of >
PAGE_SIZE), but, current logic assumes multiple pages, leading to invalid
memory access after 256K PBL entries in the PDE.
Fixes: 0c4dcd602817 ("RDMA/bnxt_re: Refactor hardware queue memory allocation")
Link: https://patch.msgid.link/r/1728373302-19530-10-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Bhargava Chenna Marreddy <bhargava.marreddy@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Currently the CQ toggle value in the shared page (read by the userlib) is
updated as part of the cqn_handler. There is a potential race of
application calling the CQ ARM doorbell immediately and using the old
toggle value.
Change the sequence of updating CQ toggle value to update in the
bnxt_qplib_service_nq function immediately after reading the toggle value
to be in sync with the HW updated value.
Fixes: e275919d9669 ("RDMA/bnxt_re: Share a page to expose per CQ info with userspace")
Link: https://patch.msgid.link/r/1728373302-19530-9-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Chandramohan Akula <chandramohan.akula@broadcom.com>
Reviewed-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
In bnxt_re_add_device(), when register netdev notifier fails, driver is
not unregistering the IB device in the error cleanup path. Also, removed
the duplicate cleanup in error path of bnxt_re_probe.
Fixes: 94a9dc6ac8f7 ("RDMA/bnxt_re: Group all operations under add_device and remove_device")
Link: https://patch.msgid.link/r/1728373302-19530-8-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Driver waits indefinitely for the fifo occupancy to go below a threshold
as soon as the pacing interrupt is received. This can cause soft lockup on
one of the processors, if the rate of DB is very high.
Add a loop count for FPGA and exit the __wait_for_fifo_occupancy_below_th
if the loop is taking more time. Pacing will be continuing until the
occupancy is below the threshold. This is ensured by the checks in
bnxt_re_pacing_timer_exp and further scheduling the work for pacing based
on the fifo occupancy.
Fixes: 2ad4e6303a6d ("RDMA/bnxt_re: Implement doorbell pacing algorithm")
Link: https://patch.msgid.link/r/1728373302-19530-7-git-send-email-selvin.xavier@broadcom.com
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Chandramohan Akula <chandramohan.akula@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
There is a possibility of a NULL pointer dereference in the failure path
of bnxt_re_add_device(). To address that, moved the update of
"rdev->adev" to bnxt_re_dev_add().
Fixes: dee3da3422d5 ("RDMA/bnxt_re: Change aux driver data to en_info to hold more information")
Link: https://patch.msgid.link/r/1728373302-19530-6-git-send-email-selvin.xavier@broadcom.com
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/linux-rdma/CAH-L+nMCwymKGqf5pd8-FZNhxEkDD=kb6AoCaE6fAVi7b3e5Qw@mail.gmail.com/T/#t
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
When the HWRM command fails, driver currently returns -EFAULT(Bad
address). This does not look correct.
Modified to return -EIO(I/O error).
Fixes: cc1ec769b87c ("RDMA/bnxt_re: Fixing the Control path command and response handling")
Fixes: 65288a22ddd8 ("RDMA/bnxt_re: use shadow qd while posting non blocking rcfw command")
Link: https://patch.msgid.link/r/1728373302-19530-5-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Currently driver is not getting correct srq. Dereference only if qplib has
a valid srq.
Fixes: b02fd3f79ec3 ("RDMA/bnxt_re: Report async events and errors")
Link: https://patch.msgid.link/r/1728373302-19530-4-git-send-email-selvin.xavier@broadcom.com
Reviewed-by: Saravanan Vajravel <saravanan.vajravel@broadcom.com>
Reviewed-by: Chandramohan Akula <chandramohan.akula@broadcom.com>
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Driver exports pacing stats only on GenP5 and P7 adapters. But while
parsing the pacing stats, driver has a check for "rdev->dbr_pacing". This
caused a trace when KASAN is enabled.
BUG: KASAN: slab-out-of-bounds in bnxt_re_get_hw_stats+0x2b6a/0x2e00 [bnxt_re]
Write of size 8 at addr ffff8885942a6340 by task modprobe/4809
Fixes: 8b6573ff3420 ("bnxt_re: Update the debug counters for doorbell pacing")
Link: https://patch.msgid.link/r/1728373302-19530-3-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Older adapters doesn't support the MAX CQ WQEs reported by older FW. So
restrict the value reported to 1M always for older adapters.
Fixes: 1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver")
Link: https://patch.msgid.link/r/1728373302-19530-2-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Abhishek Mohapatra<abhishek.mohapatra@broadcom.com>
Reviewed-by: Chandramohan Akula <chandramohan.akula@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Since commit 4c39529663b9 ("slab: Warn on duplicate cache names when
DEBUG_VM=y"), slab complains about duplicate cache names. Hence this
patch. The approach is as follows:
- Maintain an xarray with the slab size as index and a reference count
and a kmem_cache pointer as contents. Use srpt-${slab_size} as kmem
cache name.
- Use 512-byte alignment for all slabs instead of only for some of the
slabs.
- Increment the reference count instead of calling kmem_cache_create().
- Decrement the reference count instead of calling kmem_cache_destroy().
Fixes: 5dabcd0456d7 ("RDMA/srpt: Add support for immediate data")
Link: https://patch.msgid.link/r/20241009210048.4122518-1-bvanassche@acm.org
Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Closes: https://lore.kernel.org/linux-block/xpe6bea7rakpyoyfvspvin2dsozjmjtjktpph7rep3h25tv7fb@ooz4cu5z6bq6/
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
There is "accept*" misspelled as "accpet*" in the comments. Fix the
spelling.
Fixes: 146b9756f14c ("RDMA/irdma: Add connection manager")
Link: https://patch.msgid.link/r/20241008161913.19965-1-green@qrator.net
Signed-off-by: Alexander Zubkov <green@qrator.net>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
ip_dev_find() always returns real net_device address, whether traffic is
running on a vlan or real device, if traffic is over vlan, filling
endpoint struture with real ndev and an attempt to send a connect request
will results in RDMA_CM_EVENT_UNREACHABLE error. This patch fixes the
issue by using vlan_dev_real_dev().
Fixes: 830662f6f032 ("RDMA/cxgb4: Add support for active and passive open connection with IPv6 address")
Link: https://patch.msgid.link/r/20241007132311.70593-1-anumula@chelsio.com
Signed-off-by: Anumula Murali Mohan Reddy <anumula@chelsio.com>
Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
While running ISER over SIW, the initiator machine encounters a warning
from skb_splice_from_iter() indicating that a slab page is being used in
send_page. To address this, it is better to add a sendpage_ok() check
within the driver itself, and if it returns 0, then MSG_SPLICE_PAGES flag
should be disabled before entering the network stack.
A similar issue has been discussed for NVMe in this thread:
https://lore.kernel.org/all/20240530142417.146696-1-ofir.gal@volumez.com/
WARNING: CPU: 0 PID: 5342 at net/core/skbuff.c:7140 skb_splice_from_iter+0x173/0x320
Call Trace:
tcp_sendmsg_locked+0x368/0xe40
siw_tx_hdt+0x695/0xa40 [siw]
siw_qp_sq_process+0x102/0xb00 [siw]
siw_sq_resume+0x39/0x110 [siw]
siw_run_sq+0x74/0x160 [siw]
kthread+0xd2/0x100
ret_from_fork+0x34/0x40
ret_from_fork_asm+0x1a/0x30
Link: https://patch.msgid.link/r/20241007125835.89942-1-showrya@chelsio.com
Signed-off-by: Showrya M N <showrya@chelsio.com>
Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
If traffic is over vlan, cma_validate_port() fails to match vlan
net_device ifindex with bound_if_index and results in ENODEV error.
It is because rdma_copy_src_l2_addr() always assigns bound_if_index with
real net_device ifindex.
This patch fixes the issue by assigning bound_if_index with vlan
net_device index if traffic is over vlan.
Fixes: f8ef1be816bf ("RDMA/cma: Avoid GID lookups on iWARP devices")
Signed-off-by: Anumula Murali Mohan Reddy <anumula@chelsio.com>
Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com>
Link: https://patch.msgid.link/20241008114334.146702-1-anumula@chelsio.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
clear_all_interrupts() in hw/hfi1/chip.c is currently global
but only used in the same file, so make it static.
There are also 'clear_all_interrupts' functions in i2c-nomadik and
emif.c but fortunately they're already static.
(Build and boot tested only, I don't have this hardware)
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://patch.msgid.link/20241007235327.128613-1-linux@treblig.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
nlmsg_put() may return a NULL pointer assigned to nlh, which will later
be dereferenced in nlmsg_end().
Fixes: 9cbed5aab5ae ("RDMA/nldev: Add support for RDMA monitoring")
Link: https://patch.msgid.link/r/Zva71Yf3F94uxi5A@iZbp1asjb3cy8ks0srf007Z
Signed-off-by: Qianqiang Liu <qianqiang.liu@163.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
max_sw_wqe used for static wqe mode should be same as the max_wqe.
Calculate the max_sw_wqe only for the variable WQE mode.
Fixes: de1d364c3815 ("RDMA/bnxt_re: Add support for Variable WQE in Genp7 adapters")
Link: https://patch.msgid.link/r/1726715161-18941-7-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
__alloc_pbl() can return error when memory allocation fails.
Driver is not checking the status on one of the instances.
Fixes: 0c4dcd602817 ("RDMA/bnxt_re: Refactor hardware queue memory allocation")
Link: https://patch.msgid.link/r/1726715161-18941-4-git-send-email-selvin.xavier@broadcom.com
Reviewed-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Driver uses internal data structure to construct WQE frame.
It used avid type as u16 which can accommodate up to 64K AVs.
When outstanding AVID crosses 64K, driver truncates AVID and
hence it uses incorrect AVID to WR. This leads to WR failure
due to invalid AV ID and QP is moved to error state with reason
set to 19 (INVALID AVID). When RDMA CM path is used, this issue
hits QP1 and it is moved to error state
Fixes: 1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver")
Link: https://patch.msgid.link/r/1726715161-18941-3-git-send-email-selvin.xavier@broadcom.com
Reviewed-by: Selvin Xavier <selvin.xavier@broadcom.com>
Reviewed-by: Chandramohan Akula <chandramohan.akula@broadcom.com>
Signed-off-by: Saravanan Vajravel <saravanan.vajravel@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
In bnxt_re_setup_chip_ctx() when bnxt_qplib_map_db_bar() fails
driver is not freeing the memory allocated for "rdev->chip_ctx".
Fixes: 0ac20faf5d83 ("RDMA/bnxt_re: Reorg the bar mapping")
Link: https://patch.msgid.link/r/1726715161-18941-2-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
When HW is being reset, userspace should not ring doorbell otherwise
it may lead to abnormal consequence such as RAS.
Disassociate mmap pages for all uctx to prevent userspace from ringing
doorbell to HW. Since all resources will be destroyed during HW reset,
no new mmap is allowed after HW reset is completed.
Fixes: 9a4435375cd1 ("IB/hns: Add driver files for hns RoCE driver")
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20240927103323.1897094-3-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Provide a new api rdma_user_mmap_disassociate() for drivers to
disassociate mmap pages for a device.
Since drivers can now disassociate mmaps by calling this api,
introduce a new disassociation_lock to specifically prevent
races between this disassociation process and new mmaps. And
thus the old hw_destroy_rwsem is not needed in this api.
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20240927103323.1897094-2-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
no_llseek had been defined to NULL two years ago, in commit 868941b14441
("fs: remove no_llseek")
To quote that commit,
At -rc1 we'll need do a mechanical removal of no_llseek -
git grep -l -w no_llseek | grep -v porting.rst | while read i; do
sed -i '/\<no_llseek\>/d' $i
done
would do it.
Unfortunately, that hadn't been done. Linus, could you do that now, so
that we could finally put that thing to rest? All instances are of the
form
.llseek = no_llseek,
so it's obviously safe.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull rdma updates from Jason Gunthorpe:
"Usual collection of small improvements and fixes, nothing especially
stands out to me here.
The new multipath PCI feature is a sign of things to come, I think we
will see more of this in the next 10 years. Broadcom and HNS continue
to update their drivers for their new HW generations.
Summary:
- Bug fixes and minor improvments in cxgb4, siw, mlx5, rxe, efa, rts,
hfi, erdma, hns, irdma
- Code cleanups/typos/etc. Tidy alloc_ordered_workqueue() calls
- Multipath PCI for mlx5
- Variable size work queue, SRQ changes, and relaxed ordering for new
bnxt HW
- New ODP fault resolution FW protocol in mlx5
- New 'rdma monitor' netlink mechanism"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (99 commits)
RDMA/bnxt_re: Remove the unused variable en_dev
RDMA/nldev: Add missing break in rdma_nl_notify_err_msg()
RDMA/irdma: fix error message in irdma_modify_qp_roce()
RDMA/cxgb4: Added NULL check for lookup_atid
RDMA/hns: Fix ah error counter in sw stat not increasing
RDMA/bnxt_re: Recover the device when FW error is detected
RDMA/bnxt_re: Group all operations under add_device and remove_device
RDMA/bnxt_re: Use the aux device for L2 ULP callbacks
RDMA/bnxt_re: Change aux driver data to en_info to hold more information
RDMA/nldev: Expose whether RDMA monitoring is supported
RDMA/nldev: Add support for RDMA monitoring
RDMA/mlx5: Use IB set_netdev and get_netdev functions
RDMA/device: Remove optimization in ib_device_get_netdev()
RDMA/mlx5: Initialize phys_port_cnt earlier in RDMA device creation
RDMA/mlx5: Obtain upper net device only when needed
RDMA/mlx5: Check RoCE LAG status before getting netdev
RDMA/mlx5: Consider the query_vuid cap for data_direct
net/mlx5: Handle memory scheme ODP capabilities
RDMA/mlx5: Add implicit MR handling to ODP memory scheme
RDMA/mlx5: Add handling for memory scheme page fault events
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull 'struct fd' updates from Al Viro:
"Just the 'struct fd' layout change, with conversion to accessor
helpers"
* tag 'pull-stable-struct_fd' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
add struct fd constructors, get rid of __to_fd()
struct fd: representation change
introduce fd_file(), convert all accessors to it.
|
|
Variable en_dev is not effectively used, so delete it.
drivers/infiniband/hw/bnxt_re/main.c:1980:22: warning: variable ‘en_dev’ set but not used.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=10867
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Link: https://patch.msgid.link/20240918021632.36091-1-jiapeng.chong@linux.alibaba.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Clang warns (or errors with CONFIG_WERROR=y):
drivers/infiniband/core/nldev.c:2795:2: error: unannotated fall-through between switch labels [-Werror,-Wimplicit-fallthrough]
2795 | default:
| ^
Clang is a little more pedantic than GCC, which does not warn when
falling through to a case that is just break or return. Clang's version
is more in line with the kernel's own stance in deprecated.rst, which
states that all switch/case blocks must end in either break,
fallthrough, continue, goto, or return. Add the missing break to silence
the warning.
Fixes: 9cbed5aab5ae ("RDMA/nldev: Add support for RDMA monitoring")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://patch.msgid.link/20240916-rdma-fix-clang-fallthrough-nl_notify_err_msg-v1-1-89de6a7423f1@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Use a correct field max_dest_rd_atomic instead of max_rd_atomic for the
error output.
Found by Linux Verification Center (linuxtesting.org) with Svace.
Fixes: b48c24c2d710 ("RDMA/irdma: Implement device supported verb APIs")
Signed-off-by: Vitaliy Shevtsov <v.shevtsov@maxima.ru>
Link: https://lore.kernel.org/stable/20240916165817.14691-1-v.shevtsov%40maxima.ru
Link: https://patch.msgid.link/20240916165817.14691-1-v.shevtsov@maxima.ru
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
