summaryrefslogtreecommitdiff
path: root/drivers/infiniband
AgeCommit message (Collapse)AuthorFilesLines
2011-11-07Merge branch 'modsplit-Oct31_2011' of ↵Linus Torvalds41-0/+44
git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux * 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (230 commits) Revert "tracing: Include module.h in define_trace.h" irq: don't put module.h into irq.h for tracking irqgen modules. bluetooth: macroize two small inlines to avoid module.h ip_vs.h: fix implicit use of module_get/module_put from module.h nf_conntrack.h: fix up fallout from implicit moduleparam.h presence include: replace linux/module.h with "struct module" wherever possible include: convert various register fcns to macros to avoid include chaining crypto.h: remove unused crypto_tfm_alg_modname() inline uwb.h: fix implicit use of asm/page.h for PAGE_SIZE pm_runtime.h: explicitly requires notifier.h linux/dmaengine.h: fix implicit use of bitmap.h and asm/page.h miscdevice.h: fix up implicit use of lists and types stop_machine.h: fix implicit use of smp.h for smp_processor_id of: fix implicit use of errno.h in include/linux/of.h of_platform.h: delete needless include <linux/module.h> acpi: remove module.h include from platform/aclinux.h miscdevice.h: delete unnecessary inclusion of module.h device_cgroup.h: delete needless include <linux/module.h> net: sch_generic remove redundant use of <linux/module.h> net: inet_timewait_sock doesnt need <linux/module.h> ... Fix up trivial conflicts (other header files, and removal of the ab3550 mfd driver) in - drivers/media/dvb/frontends/dibx000_common.c - drivers/media/video/{mt9m111.c,ov6650.c} - drivers/mfd/ab3550-core.c - include/linux/dmaengine.h
2011-11-04Merge branches 'iser', 'mthca' and 'qib' into for-nextRoland Dreier2-8/+4
2011-11-04IB/qib: Fix panic in RC error flushing logicMike Marciniszyn1-7/+3
The following panic can occur when flushing a QP: RIP: 0010:[<ffffffffa0168e8b>] [<ffffffffa0168e8b>] qib_send_complete+0x3b/0x190 [ib_qib] RSP: 0018:ffff8803cdc6fc90 EFLAGS: 00010046 RAX: 0000000000000000 RBX: ffff8803d84ba000 RCX: 0000000000000000 RDX: 0000000000000005 RSI: ffffc90015a53430 RDI: ffff8803d84ba000 RBP: ffff8803cdc6fce0 R08: ffff8803cdc6fc90 R09: 0000000000000001 R10: 00000000ffffffff R11: 0000000000000000 R12: ffff8803d84ba0c0 R13: ffff8803d84ba5cc R14: 0000000000000800 R15: 0000000000000246 FS: 0000000000000000(0000) GS:ffff880036600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b CR2: 0000000000000034 CR3: 00000003e44f9000 CR4: 00000000000406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process qib/0 (pid: 1350, threadinfo ffff8803cdc6e000, task ffff88042728a100) Stack: 53544c5553455201 0000000100000005 0000000000000000 ffff8803d84ba000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000001 ffff8803cdc6fd30 ffffffffa0165d7a Call Trace: [<ffffffffa0165d7a>] qib_make_rc_req+0x36a/0xe80 [ib_qib] [<ffffffffa0165a10>] ? qib_make_rc_req+0x0/0xe80 [ib_qib] [<ffffffffa01698b3>] qib_do_send+0xf3/0xb60 [ib_qib] [<ffffffff814db757>] ? thread_return+0x4e/0x777 [<ffffffffa01697c0>] ? qib_do_send+0x0/0xb60 [ib_qib] [<ffffffff81088bf0>] worker_thread+0x170/0x2a0 [<ffffffff8108e530>] ? autoremove_wake_function+0x0/0x40 [<ffffffff81088a80>] ? worker_thread+0x0/0x2a0 [<ffffffff8108e1c6>] kthread+0x96/0xa0 [<ffffffff8100c1ca>] child_rip+0xa/0x20 [<ffffffff8108e130>] ? kthread+0x0/0xa0 [<ffffffff8100c1c0>] ? child_rip+0x0/0x20 RIP [<ffffffffa0168e8b>] qib_send_complete+0x3b/0x190 [ib_qib] The RC error state flush logic in qib_make_rc_req() could return all of the acked wqes and potentially have emptied the queue. It would then unconditionally try return a flush completion via qib_send_complete() for an invalid wqe, or worse a valid one that is not queued. The panic results when the completion code tries to maintain an MR reference count for a NULL MR. This fix modifies logic to only send one completion per qib_make_rc_req() call and changing the completion status from IB_WC_SUCCESS to IB_WC_WR_FLUSH_ERR as the completions progress. The outer loop will call as many times as necessary to flush the queue. Reviewed-by: Ram Vepa <ram.vepa@qlogic.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-11-04IB/iser: DMA unmap TX bufs used for iSCSI/iSER headersOr Gerlitz2-4/+8
The current driver never does DMA unmapping on these buffers. Fix that by adding DMA unmapping to the task cleanup callback, and DMA mapping to the task init function (drop the headers_initialized micro-optimization). Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-11-04IB/iser: Use separate buffers for the login request/responseOr Gerlitz3-15/+52
The driver counted on the transactional nature of iSCSI login/text flows and used the same buffer for both the request and the response. We also went further and did DMA mapping only once, with DMA_FROM_DEVICE, which violates the DMA mapping API. Fix that by using different buffers, one for requests and one for responses, and use the correct DMA mapping direction for each. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-11-04IB/mthca: Fix buddy->num_free allocation sizeRoland Dreier1-1/+1
The num_free field of mthca_buddy has a type of array of unsigned int while it was allocated as an array of pointers. On 64-bit platforms this allocates twice more than required. Fix this by allocating the correct size for the type. This is the same bug just fixed in mlx4 by Eli Cohen <eli@mellanox.co.il>. Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-11-01Merge branch 'for-linus' of ↵Linus Torvalds67-945/+4419
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (62 commits) mlx4_core: Deprecate log_num_vlan module param IB/mlx4: Don't set VLAN in IBoE WQEs' control segment IB/mlx4: Enable 4K mtu for IBoE RDMA/cxgb4: Mark QP in error before disabling the queue in firmware RDMA/cxgb4: Serialize calls to CQ's comp_handler RDMA/cxgb3: Serialize calls to CQ's comp_handler IB/qib: Fix issue with link states and QSFP cables IB/mlx4: Configure extended active speeds mlx4_core: Add extended port capabilities support IB/qib: Hold links until tuning data is available IB/qib: Clean up checkpatch issue IB/qib: Remove s_lock around header validation IB/qib: Precompute timeout jiffies to optimize latency IB/qib: Use RCU for qpn lookup IB/qib: Eliminate divide/mod in converting idx to egr buf pointer IB/qib: Decode path MTU optimization IB/qib: Optimize RC/UC code by IB operation IPoIB: Use the right function to do DMA unmap pages RDMA/cxgb4: Use correct QID in insert_recv_cqe() RDMA/cxgb4: Make sure flush CQ entries are collected on connection close ...
2011-11-01Merge branches 'amso1100', 'cma', 'cxgb3', 'cxgb4', 'fdr', 'ipath', 'ipoib', ↵Roland Dreier66-941/+4418
'misc', 'mlx4', 'misc', 'nes', 'qib' and 'xrc' into for-next
2011-11-01mm: distinguish between mlocked and pinned pagesChristoph Lameter3-8/+8
Some kernel components pin user space memory (infiniband and perf) (by increasing the page count) and account that memory as "mlocked". The difference between mlocking and pinning is: A. mlocked pages are marked with PG_mlocked and are exempt from swapping. Page migration may move them around though. They are kept on a special LRU list. B. Pinned pages cannot be moved because something needs to directly access physical memory. They may not be on any LRU list. I recently saw an mlockalled process where mm->locked_vm became bigger than the virtual size of the process (!) because some memory was accounted for twice: Once when the page was mlocked and once when the Infiniband layer increased the refcount because it needt to pin the RDMA memory. This patch introduces a separate counter for pinned pages and accounts them seperately. Signed-off-by: Christoph Lameter <cl@linux.com> Cc: Mike Marciniszyn <infinipath@qlogic.com> Cc: Roland Dreier <roland@kernel.org> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-11-01infiniband: add moduleparam.h to drivers/infiniband as requiredPaul Gortmaker6-0/+6
These files were getting the moduleparam infrastructure from the implicit presence of module.h being everywhere, but that is going away soon. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-11-01infiniband: add in export.h for files using EXPORT_SYMBOL/THIS_MODULEPaul Gortmaker14-0/+14
These were getting it implicitly via device.h --> module.h but we are going to stop that when we clean up the headers. Fix these in advance so the tree remains biscect-clean. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-11-01infiniband: Fix up module files that need to include module.hPaul Gortmaker19-0/+21
They had been getting it implicitly via device.h but we can't rely on that for the future, due to a pending cleanup so fix it now. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-11-01infiniband: Fix up users implicitly relying on getting stat.hPaul Gortmaker4-0/+4
They get it via module.h (via device.h) but we want to clean that up. When we do, we'll get things like: CC [M] drivers/infiniband/core/sysfs.o sysfs.c:361: error: 'S_IRUGO' undeclared here (not in a function) sysfs.c:654: error: 'S_IWUSR' undeclared here (not in a function) so add in the stat header it is using explicitly in advance. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31IB/mlx4: Don't set VLAN in IBoE WQEs' control segmentOr Gerlitz1-9/+2
There's no need to set the vlan-related fields in an IBoE send WQE control segment: - the vlan to be used by a UD QP is set in the datagram segment. - for GSI (CM) QP, all the headers down to 8021q and MAC are built by the software anyway. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-10-31IB/mlx4: Enable 4K mtu for IBoEOr Gerlitz1-1/+1
The IBoE port MTU is derived from the corresponding Ethernet netdevice MTU, which can support jumbo frames of 9K, and hence surely supports the max IB mtu of 4K. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-10-31RDMA/cxgb4: Mark QP in error before disabling the queue in firmwareTom Tucker1-0/+4
QPs need to be moved to error before telling the firwmare to shutdown the queue. Otherwise, the application can submit WRs that will never get fetched by the hardware and never flushed by the driver. Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com> Acked-by: Steve Wise <swsie@opengridcomputing.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-10-31RDMA/cxgb4: Serialize calls to CQ's comp_handlerKumar Sanghvi4-4/+23
Commit 01e7da6ba53c ("RDMA/cxgb4: Make sure flush CQ entries are collected on connection close") introduced a potential problem where a CQ's comp_handler can get called simultaneously from different places in the iw_cxgb4 driver. This does not comply with Documentation/infiniband/core_locking.txt, which states that at a given point of time, there should be only one callback per CQ should be active. This problem was reported by Parav Pandit <Parav.Pandit@Emulex.Com>. Based on discussion between Parav Pandit and Steve Wise, this patch fixes the above problem by serializing the calls to a CQ's comp_handler using a spin_lock. Reported-by: Parav Pandit <Parav.Pandit@Emulex.Com> Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com> Acked-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-10-31RDMA/cxgb3: Serialize calls to CQ's comp_handlerKumar Sanghvi4-2/+20
iw_cxgb3 has a potential problem where a CQ's comp_handler can get called simultaneously from different places in iw_cxgb3 driver. This does not comply with Documentation/infiniband/core_locking.txt, which states that at a given point of time, there should be only one callback per CQ should be active. Such problem was reported by Parav Pandit <Parav.Pandit@Emulex.Com> for iw_cxgb4 driver. Based on discussion between Parav Pandit and Steve Wise, this patch fixes the above problem by serializing the calls to a CQ's comp_handler using a spin_lock. Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com> Acked-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-10-31IB/qib: Fix issue with link states and QSFP cablesMitko Haralanov2-10/+21
Fix an issue where the link would come up after replugging a cable even if it has been DISABLED manually. Signed-off-by: Mitko Haralanov <mitko@qlogic.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-10-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds1-26/+54
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (204 commits) [SCSI] qla4xxx: export address/port of connection (fix udev disk names) [SCSI] ipr: Fix BUG on adapter dump timeout [SCSI] megaraid_sas: Fix instance access in megasas_reset_timer [SCSI] hpsa: change confusing message to be more clear [SCSI] iscsi class: fix vlan configuration [SCSI] qla4xxx: fix data alignment and use nl helpers [SCSI] iscsi class: fix link local mispelling [SCSI] iscsi class: Replace iscsi_get_next_target_id with IDA [SCSI] aacraid: use lower snprintf() limit [SCSI] lpfc 8.3.27: Change driver version to 8.3.27 [SCSI] lpfc 8.3.27: T10 additions for SLI4 [SCSI] lpfc 8.3.27: Fix queue allocation failure recovery [SCSI] lpfc 8.3.27: Change algorithm for getting physical port name [SCSI] lpfc 8.3.27: Changed worst case mailbox timeout [SCSI] lpfc 8.3.27: Miscellanous logic and interface fixes [SCSI] megaraid_sas: Changelog and version update [SCSI] megaraid_sas: Add driver workaround for PERC5/1068 kdump kernel panic [SCSI] megaraid_sas: Add multiple MSI-X vector/multiple reply queue support [SCSI] megaraid_sas: Add support for MegaRAID 9360/9380 12GB/s controllers [SCSI] megaraid_sas: Clear FUSION_IN_RESET before enabling interrupts ...
2011-10-28IB/mlx4: Configure extended active speedsMarcel Apfelbaum1-1/+38
Set the extended active speeds based on the hardware configuration. Signed-off-by: Marcel Apfelbaum <marcela@dev.mellanox.co.il> Reviewed-by: Hal Rosenstock <hal@mellanox.com> [ Move FDR-10 handling into ib_link_query_port(). - Roland ] Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-10-22IB/qib: Hold links until tuning data is availableMitko Haralanov4-57/+94
Hold the link state machine until the tuning data is read from the QSFP EEPROM so correct tuning settings are applied before the state machine attempts to bring the link up. Link is also held on cable unplug in case a different cable is used. Signed-off-by: Mitko Haralanov <mitko@qlogic.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-10-22IB/qib: Clean up checkpatch issueMike Marciniszyn1-2/+1
This was probably present from initial submission. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-10-21IB/qib: Remove s_lock around header validationMike Marciniszyn4-15/+8
Review of qib_ruc_check_hdr() shows that the s_lock is not required in the normal case. The r_lock is held in all cases, and protects the qp fields that are read. The s_lock will be needed to around the call to qib_migrate_qp() to insure that the send engine sees a consistent set of fields. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-10-21IB/qib: Precompute timeout jiffies to optimize latencyMike Marciniszyn3-6/+11
A new field is added to qib_qp called timeout_jiffies. It is initialized upon create and modify. The field is now used instead of a computation based on qp->timeout. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-10-21IB/qib: Use RCU for qpn lookupMike Marciniszyn5-41/+87
The heavy weight spinlock in qib_lookup_qpn() is replaced with RCU. The hash list itself is now accessed via jhash functions instead of mod. The changes should benefit multiple receive contexts in different processors by not contending for the lock just to read the hash structures. The patch also adds a lookaside_qp (pointer) and a lookaside_qpn in the context. The interrupt handler will test the current packet's qpn against lookaside_qpn if the lookaside_qp pointer is non-NULL. The pointer is NULL'ed when the interrupt handler exits. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-10-21IB/qib: Eliminate divide/mod in converting idx to egr buf pointerMike Marciniszyn6-5/+18
The context init now saves a shift from rcvegrbufs_perchunk rcvegrbufs_perchunk_shift using ilog2. A BUG_ON() protects the power of 2 assumption. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-10-21IB/qib: Decode path MTU optimizationMike Marciniszyn4-6/+9
Store both the encoded and decoded MTU in the QP structure as a minor optimization for UC/RC receive routines. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-10-21IB/qib: Optimize RC/UC code by IB operationMike Marciniszyn2-9/+24
The memset for zeroing work completions had been unconditional. This patch removes the memset and moves the zeroing into the work completion with a more explicit field by field set. With this patch, non-ONLY/non-LAST packets will avoid the overhead since they will not generate a completion. Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-10-19net: add skb frag size accessorsEric Dumazet4-16/+18
To ease skb->truesize sanitization, its better to be able to localize all references to skb frags size. Define accessors : skb_frag_size() to fetch frag size, and skb_frag_size_{set|add|sub}() to manipulate it. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-18IPoIB: Use the right function to do DMA unmap pagesDotan Barak1-2/+2
Pages that were mapped using ib_dma_map_page() should be unmapped using ib_dma_unmap_page(). Signed-off-by: Dotan Barak <dotanb@dev.mellanox.co.il> Reviewed-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-10-15RDMA/cxgb4: Use correct QID in insert_recv_cqe()Jonathan Lallinger1-1/+1
When creating flushed receive CQEs, set the QPID field in the t4_cqe to the SQ QID and not the RQ QID. Otherwise the poll code will not find the correct QP context. Signed-off by: Jonathan Lallinger <jonathan@ogc.us> Signed-off by: Steve Wise <swise@ogc.us> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-10-15RDMA/cxgb4: Make sure flush CQ entries are collected on connection closeKumar Sanghvi1-1/+5
At the time when a peer closes the connection, iw_cxgb4 will not send a cq event if ibqp.uobject exists. In that case, its possible for a user application to get blocked in ibv_get_cq_event(). To resolve this, call the cq's comp_handler to unblock any read from ibv_get_cq_event(). This will trigger userspace to poll the cq and collect flush status completions for any pending work requests. Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com> Acked-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-10-13RDMA/uverbs: Export ib_open_qp() capability to user spaceSean Hefty4-2/+97
Allow processes that share the same XRC domain to open an existing shareable QP. This permits those processes to receive events on the shared QP and transfer ownership, so that any process may modify the QP. The latter allows the creating process to exit, while a remaining process can still transition it for path migration purposes. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-10-13RDMA/core: Export ib_open_qp() to share XRC TGT QPsSean Hefty3-42/+138
XRC TGT QPs are shared resources among multiple processes. Since the creating process may exit, allow other processes which share the same XRC domain to open an existing QP. This allows us to transfer ownership of an XRC TGT QP to another process. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-10-13IB/mlx4: Add support for XRC QPsSean Hefty3-33/+90
Support the creation of XRC INI and TGT QPs. To handle the case where a CQ or PD is not provided, we allocate them internally with the xrcd. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-10-13IB/mlx4: Add support for XRC SRQsSean Hefty2-5/+11
Allow the user to create XRC SRQs. This patch is based on a patch from Jack Morgenstrein <jackm@dev.mellanox.co.il>. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-10-13IB/mlx4: Add support for XRC domainsSean Hefty2-0/+71
Support creating and destroying XRC domains. Any sharing of the XRCD is managed above the low-level driver. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-10-13IB/cm: Do not automatically disconnect XRC TGT QPsSean Hefty1-0/+2
Because an XRC TGT QP can end up being shared among multiple processes, don't have the ib_cm automatically send a DREQ when the userspace process that owns the ib_cm_id exits. Disconnect can be initiated by the user directly; otherwise, the owner of the XRC INI QP controls the connection. Note that as a result of the process exiting, the ib_cm will stop tracking the XRC connection on the target side. For the purposes of disconnecting, this isn't a big deal. The ib_cm will respond to the DREQ appropriately. For other messages, mainly LAP, the CM will reject the request, since there's no one available to route the request to. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-10-13RDMA/cma: Support XRC QPsSean Hefty1-1/+1
Allow users to connect XRC QPs through the rdma_cm. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-10-13RDMA/ucm: Allow user to specify QP type when creating idSean Hefty1-1/+4
Allow the user to indicate the QP type separately from the port space when allocating an rdma_cm_id. With RDMA_PS_IB, there is no longer a 1:1 relationship between the QP type and port space, so we need to switch on the QP type to select between UD and connected QPs. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-10-13RDMA/cm: Define new RDMA port space specific to IBSean Hefty1-0/+5
Add RDMA_PS_IB. XRC QP types will use the IB port space when operating over the RDMA CM. For the 'IP protocol' field value, we select 0x3F, which is listed as being for 'any local network'. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-10-13IB/cm: Update XRC support based on XRC annex errataSean Hefty2-8/+26
The XRC annex was updated to have XRC behave more like RD. Specifically, the XRC TGT QPN moves from the local QPN to local EECN field. Lookup of SRQN is done using the REQ/REP protocol. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-10-13IB/cm: Update protocol to support XRCSean Hefty2-16/+43
Update the REQ and REP messages to support XRC connection setup according to the XRC Annex. Several existing fields must be set to 0 or 1 when connecting XRC QPs, and a reserved field is changed to an extended transport type. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-10-13RDMA/uverbs: Export XRC TGT QPs to user spaceSean Hefty2-40/+73
Allow user space to operate on XRC TGT QPs the same way as other types of QPs, with one notable exception: since XRC TGT QPs may be shared among multiple processes, the XRC TGT QP is allowed to exist beyond the lifetime of the creating process. The process that creates the QP is allowed to destroy it, but if the process exits without destroying the QP, then the QP will be left bound to the lifetime of the XRCD. TGT QPs are not associated with CQs or a PD. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-10-13RDMA/uverbs: Export XRC INI QPs to userspaceSean Hefty1-11/+37
XRC INI QPs are similar to send only RC QPs. Allow user space to create INI QPs. Note that INI QPs do not require receive CQs. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-10-13RDMA/uverbs: Export XRC SRQs to user spaceSean Hefty3-40/+139
We require additional information to create XRC SRQs than we can exchange using the existing create SRQ ABI. Provide an enhanced create ABI for extended SRQ types. Based on patches by Jack Morgenstein <jackm@dev.mellanox.co.il> and Roland Dreier <roland@purestorage.com> Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-10-13RDMA/uverbs: Export XRC domains to user spaceSean Hefty4-0/+347
Allow user space to create XRC domains. Because XRCDs are expected to be shared among multiple processes, we use inodes to identify an XRCD. Based on patches by Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-10-13RDMA/verbs: Cleanup XRC TGT QPs when destroying XRCDSean Hefty1-0/+47
XRC TGT QPs are intended to be shared among multiple users and processes. Allow the destruction of an XRC TGT QP to be done explicitly through ib_destroy_qp() or when the XRCD is destroyed. To support destroying an XRC TGT QP, we need to track TGT QPs with the XRCD. When the XRCD is destroyed, all tracked XRC TGT QPs are also cleaned up. To avoid stale reference issues, if a user is holding a reference on a TGT QP, we increment a reference count on the QP. The user releases the reference by calling ib_release_qp. This releases any access to the QP from a user above verbs, but allows the QP to continue to exist until destroyed by the XRCD. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-10-13RDMA/core: Add XRC QPsSean Hefty1-20/+130
XRC ("eXtended reliable connected") is an IB transport that provides better scalability by allowing senders to specify which shared receive queue (SRQ) should be used to receive a message, which essentially allows one transport context (QP connection) to serve multiple destinations (as long as they share an adapter, of course). XRC communication is between an initiator (INI) QP and a target (TGT) QP. Target QPs are associated with SRQs through an XRCD. An XRC TGT QP behaves like a receive-only RD QP. XRC INI QPs behave similarly to RC QPs, except that work requests posted to an XRC INI QP must specify the remote SRQ that is the target of the work request. We define two new QP types for XRC, to distinguish between INI and TGT QPs, and update the core layer to support XRC QPs. This patch is derived from work by Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-12 15:49:40 +0300