summaryrefslogtreecommitdiff
path: root/drivers/infiniband/ulp/iser/iscsi_iser.h
AgeCommit message (Collapse)AuthorFilesLines
2015-08-31IB/iser: Chain all iser transaction send work requestsSagi Grimberg1-0/+34
Chaning of send work requests benefits performance by reducing the send queue lock contention (acquired in ib_post_send) and saves us HW doorbells which is posted only once. Currently, in normal IO flows iser does not chain the CDB send work request with the registration work request. Also in PI flows, signature work requests are not chained as well. Lets chain those and post only once. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-08-31IB/iser: Support up to 8MB data transfer in a single commandSagi Grimberg1-2/+12
iser support up to 512KB data transfer in a single scsi command. This means that larger IOs will split to different request. While iser can easily saturate FDR/EDR wires, some arrays are fine tuned for 1MB (or larger) IO sizes, hence add an option to support larger transfers (up to 8MB) if the device allows it. Given that a few target implementations don't support data transfers of more than 512KB by default and the fact that larger IO sizes require more resources, we introduce a module parameter to determine the maximum number of 512B sectors in a single scsi command. Users that are interested in larger transfers can change this value given that the target supports larger transfers. At the moment, iser works in 4K pages granularity, In a later stage we will get it to work with system page size instead. IO operations that consists of N pages will need a page vector of size N+1 in case the first SG element contains an offset. Given that some devices allocates memory regions in powers of 2, this means that allocating a region with N+1 pages, will result in region resources allocation of the next power of 2. Since we don't want that to happen, in case we are in the limit of IO size supported and the first SG element has an offset, we align the SG list using a bounce buffer (which is OK given that this is not likely to happen a lot). Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-08-31IB/iser: Pass registration pool a size parameterSagi Grimberg1-3/+8
Hard coded for now. This will allow to allocate different sized MRs depending on the IO size needed (and device capabilities). This patch does not change any functionality. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-08-31IB/iser: Unify fast memory registration flowsSagi Grimberg1-10/+13
iser_reg_rdma_mem_[fastreg|fmr] share a lot of code, and logically do the same thing other than the buffer registration method itself (iser_fast_reg_mr vs. iser_fast_reg_fmr). The DIF logic is not implemented in the FMR flow as there is no existing device that supports FMRs and Signature feature. This patch unifies the flow in a single routine iser_reg_rdma_mem and just split to fmr/frwr for the buffer registration itself. Also, for symmetry reasons, unify iser_unreg_rdma_mem (which will call the relevant device specific unreg routine). Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Adir Lev <adirl@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-08-31IB/iser: Make reg_desc_get a per device routineSagi Grimberg1-3/+13
As for fmrs we will hold a single registration descriptor as no need for multiple like in the frwr mode (descriptor for each task). This change helps unifying the duplicate registration code paths. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Adir Lev <adirl@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-08-31IB/iser: Maintain connection fmr_pool under a single registration descriptorAdir Lev1-22/+16
This will allow us to unify the memory registration code path between the various methods which vary by the device capabilities. This change will make it easier and less intrusive to remove fmr_pools from the code when we'd want to. The reason we use a single descriptor is to avoid taking a redundant spinlock when working with FMRs. We also change the signature of iser_reg_page_vec to make it match iser_fast_reg_mr (and the future indirect registration method). Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Adir Lev <adirl@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-08-31IB/iser: Introduce iser registration pool structSagi Grimberg1-20/+29
Instead of having it a part of the connection structure, have it be under a dedicated (embedded) structure in the connection. A logical separation of the registration pool and the connection structure. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Adir Lev <adirl@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-08-31IB/iser: Introduce iser_reg_opsSagi Grimberg1-14/+25
Move all the per-device function pointers to an easy extensible iser_reg_ops structure that contains all the iser registration operations. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-08-31IB/iser: Rename struct fast_reg_descriptor -> iser_fr_descSagi Grimberg1-4/+4
Avoid struct names without iser_ prefix. This patch does not change any functionality. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-08-31IB/iser: Introduce struct iser_reg_resourcesSagi Grimberg1-16/+20
Have fast_reg_descriptor hold struct iser_reg_resources (mr, frpl, valid flag). This will be useful when the actual buffer registration routines will be passed with the needed registration resources (i.e. iser_reg_resources) without being aware of their nature (i.e. data or protection). In order to achieve this, we remove reg_indicators flags container and place specific flags (mr_valid) within iser_reg_resources struct. We also place the sig_mr_valid and sig_protcted flags in iser_pi_context. This patch also modifies iser_fast_reg_mr to receive the reg_resources instead of the fast_reg_descriptor and a data/protection indicator. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Adir Lev <adirl@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-08-31IB/iser: Fix possible bogus DMA unmappingSagi Grimberg1-0/+2
If iser_initialize_task_headers() routine failed before dma mapping, we should not attempt to unmap in cleanup_task(). Fixes: 7414dde0a6c3a958e (IB/iser: Fix race between iser connection ...) Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-04-15IB/iser: Rewrite bounce buffer code pathSagi Grimberg1-6/+2
In some rare cases, IO operations may be not aligned to page boundaries. This prevents iser from performing fast memory registration. In order to overcome that iser uses a bounce buffer to carry the transaction. We basically allocate a buffer in the size of the transaction and perform a copy. The buffer allocation using kmalloc is too restrictive since it requires higher order (atomic) allocations for large transactions (which may result in memory exhaustion fairly fast for some workloads). We rewrite the bounce buffer code path to allocate scattered pages and perform a copy between the transaction sg and the bounce sg. Reported-by: Alex Lyakas <alex@zadarastorage.com> Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-04-15IB/iser: Bump version to 1.6Sagi Grimberg1-1/+1
Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-04-15IB/iser: Modify struct iser_mem_reg membersSagi Grimberg1-9/+5
No need to keep lkey, va, len variables, we can keep them as struct ib_sge. This will help when we change the memory registration logic. This patch does not change any functionality. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Adir Lev <adirl@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-04-15IB/iser: Move fastreg descriptor pool get/put to helper functionsSagi Grimberg1-0/+5
Instead of open-coding connection fastreg pool get/put, we introduce iser_reg_desc[get|put] helpers. We aren't setting these static as this will be a per-device routine later on. Also, cleanup iser_unreg_rdma_mem_fastreg a bit. This patch does not change any functionality. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Adir Lev <adirl@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-04-15IB/iser: Get rid of struct iser_rdma_regdSagi Grimberg1-19/+2
This struct members other than struct iser_mem_reg are unused, so remove it altogether. This patch does not change any functionality. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Adir Lev <adirl@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-04-15IB/iser: Move memory reg/dereg routines to iser_memory.cSagi Grimberg1-4/+0
As memory registration/de-registration methods, lets move them to their natural location. While we're at it, make iser_reg_page_vec routine static. This patch does not change any functionality. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-04-15IB/iser: Remove a redundant struct iser_data_bufSagi Grimberg1-7/+5
No need to keep two iser_data_buf structures just in case we use mem copy. We can avoid that just by adding a pointer to the original sg. So keep only two iser_data_buf per command (data and protection) and pass the relevant data_buf to bounce buffer routine. This patch does not change any functionality. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Adir Lev <adirl@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-02-13IB/iser: Use correct dma direction when unmapping SGsRoi Dayan1-1/+3
We always unmap SGs with the same direction instead of unmapping with the direction the mapping was done, fix that. Fixes: 9a8b08fad2ef ("IB/iser: Generalize iser_unmap_task_data and [...]") Signed-off-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-12-16IB/iser: Bump version to 1.5Or Gerlitz1-1/+1
Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-12-16IB/iser: Micro-optimize iser loggingSagi Grimberg1-8/+5
And fix a checkpatch warning. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-12-16IB/iser: Use more completion queuesSagi Grimberg1-3/+1
No reason to settle with four, can use the min between device max comp vectors and number of cores. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-12-16IB/iser: Remove redundant is_mr indicatorSagi Grimberg1-2/+0
It is enough to check mem_h pointer assignment, mem_h == NULL will indicate that buffer is not registered using mr. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-12-16IB/iser: Fix possible SQ overflowMax Gurtovoy1-0/+2
Fix a regression was introduced in commit 6df5a128f0fd ("IB/iser: Suppress scsi command send completions"). The sig_count was wrongly set to be static variable, thus it is possible that we won't reach to (sig_count % ISER_SIGNAL_BATCH) == 0 condition (due to races) and the send queue will be overflowed. Instead keep sig_count per connection. We don't need it to be atomic as we are safe under the iscsi session frwd_lock taken by libiscsi on the queuecommand path. Fixes: 6df5a128f0fd ("IB/iser: Suppress scsi command send completions") Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-12-16IB/iser: Re-adjust CQ and QP send ring sizes to HW limitsMinh Tran1-0/+7
Re-adjust max CQEs per CQ and max send_wr per QP according to the resource limits supported by underlying hardware. Signed-off-by: Minh Tran <minhduc.tran@emulex.com> Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Acked-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-10-09IB/iser: Bump version, add maintainerOr Gerlitz1-1/+1
Update the driver version and add Sagi Grimberg as maintainer Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-10-09IB/iser: Add/Fix kernel doc style descriptions in iscsi_iser.hSagi Grimberg1-46/+189
- iser_hdr - iser_data_buf - iser_mem_reg - iser_regd_buf - iser_tx_desc - iser_rx_desc - iser_device - iser_pi_context - iser_conn - ib_conn - iser_comp - iscsi_iser_task - iser_global While we're at it, change nit alignments in this file This patch does not change any functionality. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-10-09IB/iser: Nit - add space after __func__ in iser loggingSagi Grimberg1-8/+8
Change logging: "iser:XXXX" to "iser: XXXX" Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-10-09IB/iser: Suppress scsi command send completionsSagi Grimberg1-2/+3
Singal completion of every 32 scsi commands and suppress all the rest. We don't do anything upon getting the completion so no need to "just consume" it. Cleanup of scsi command is done in cleanup_task callback. Still keep dataout and control send completions as we may need to cleanup there. This helps reducing the amount of interrupts/completions in the IO path. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-10-09IB/iser: Optimize completion pollingSagi Grimberg1-0/+4
Poll in batch of 16. Since we don't want it on the stack, keep under iser completion context (iser_comp). Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-10-09IB/iser: Use beacon to indicate all completions were consumedSagi Grimberg1-2/+3
Avoid post_send counting (atomic) in the IO path just to keep track of how many completions we need to consume. Use a beacon post to indicate that all prior posts completed. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-10-09IB/iser: Use single CQ for RX and TXSagi Grimberg1-4/+5
This will solve a possible condition where we might miss TX completion (flush error) during session teardown. Since we are using a single CQ, we don't need to actively drain the TX CQ, instead just wait for flush_completion (when counters reach zero) and remove iser_poll_for_flush_errors(). This patch might introduce a minor performance regression on its own, but the next patches will enhance performance using a single CQ for RX and TX. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-10-09IB/iser: Centralize iser completion contextsSagi Grimberg1-13/+22
Introduce iser_comp which centralizes all iser completion related items and is referenced by iser_device and each ib_conn. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-10-09IB/iser: Fix DEVICE REMOVAL handling in the absence of iscsi daemonSagi Grimberg1-3/+3
iscsi daemon is in user-space, thus we can't rely on it to be invoked at connection teardown (if not running or does not receive CPU time). This patch addresses the issue by re-structuring iSER connection teardown logic and CM events handling. The CM events will dictate the RDMA resources destruction (ib_conn) and iser_conn is kept around as long as iscsi_conn is left around allowing iscsi/iser callbacks to continue after RDMA transport was destroyed. This patch introduces a separation in logic when handling CM events: - DISCONNECTED_HANDLER, ADDR_CHANGED This events indicate the start of teardown process. Actions: 1. Terminate the connection: rdma_disconnect (send DREQ/DREP) 2. Notify iSCSI of connection failure 3. Change state to TERMINATING 4. Poll for all flush errors to be consumed - TIMEWAIT_EXIT, DEVICE_REMOVAL These events indicate the final stage of termination process and we can free RDMA related resources. Actions: 1. Call disconnected handler (we are not guaranteed that DISCONNECTED event was invoked in the past) 2. Cleanup RDMA related resources 3. For DEVICE_REMOVAL return non-zero rc from cma_handler to implicitly destroy the cm_id (Can't rely on user-space, make sure we have forward progress) We replace flush_completion (indicate all flushes were consumed) with ib_completion (rdma resources were cleaned up). The iser_conn_release_work will wait for teardown completions: - conn_stop was completed (tasks were cleaned-up) - stop_completion - RDMA resources were destroyed - ib_completion And then will continue to free iser connection representation (iser_conn). Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Ariel Nahum <arieln@mellanox.com> Signed-off-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-10-09IB/iser: Remove unused variables and dead codeRoi Dayan1-4/+0
Signed-off-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-10-09IB/iser: Re-introduce ib_connSagi Grimberg1-31/+54
Structure that describes the RDMA relates connection objects. Static member of iser_conn. This patch does not change any functionality Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-10-09IB/iser: Rename ib_conn -> iser_connSagi Grimberg1-21/+23
Two reasons why we choose to do this: 1. No point today calling struct iser_conn by another name ib_conn 2. In the next patches we will restructure iser control plane representation - struct iser_conn: connection logical representation - struct ib_conn: connection RDMA layout representation This patch does not change any functionality. Signed-off-by: Ariel Nahum <arieln@mellanox.com> Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-09-22IB/iser: Bump version to 1.4.1Or Gerlitz1-1/+1
Signed-off-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-08-02IB/iser: Replace connection waitqueue with completion objectAriel Nahum1-1/+2
Instead of waiting for events and condition changes of the iser connection state, we wait for explicit completion of connection establishment and teardown. Separate connection establishment wait object from the teardown object to avoid a situation where racing connection establishment and teardown may concurrently wakeup each other. ep_poll will wait for up_completion invoked by iser_connected_handler() and iser release worker will wait for flush_completion before releasing the connection. Bound the completion wait with a 30 seconds timeout for cases where iscsid (the user space iscsi daemon) is too slow or gone. Signed-off-by: Ariel Nahum <arieln@mellanox.com> Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-08-02IB/iser: Protect iser state machine with a mutexAriel Nahum1-0/+1
The iser connection state lookups and transitions are not fully protected. Some transitions are protected with a spinlock, and in some cases the state is accessed unprotected due to specific assumptions of the flow. Introduce a new mutex to protect the connection state access. We use a mutex since we need to also include a scheduling operations executed under the state lock. Each state transition/condition and its corresponding action will be protected with the state mutex. The rdma_cm events handler acquires the mutex when handling connection events. Since iser connection state can transition to DOWN concurrently during connection establishment, we bailout from addr/route resolution events when the state is not PENDING. This addresses a scenario where ep_poll retries expire during CMA connection establishment. In this case ep_disconnect is invoked while CMA events keep coming (address/route resolution, connected, etc...). Signed-off-by: Ariel Nahum <arieln@mellanox.com> Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-08-02IB/iser: Support IPv6 address familyRoi Dayan1-2/+2
Replace struct sockaddr_in with struct sockaddr which supports both IPv4 and IPv6, and print using the %pIS format directive. Signed-off-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-05-26IB/iser: Bump version to 1.4Or Gerlitz1-1/+1
Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-05-26IB/iser: Simplify connection managementAriel Nahum1-3/+5
iSER relies on refcounting to manage iser connections establishment and teardown. Following commit 39ff05dbbbdb ("IB/iser: Enhance disconnection logic for multi-pathing"), iser connection maintain 3 references: - iscsi_endpoint (at creation stage) - cma_id (at connection request stage) - iscsi_conn (at bind stage) We can avoid taking explicit refcounts by correctly serializing iser teardown flows (graceful and non-graceful). Our approach is to trigger a scheduled work to handle ordered teardown by gracefully waiting for 2 cleanup stages to complete: 1. Cleanup of live pending tasks indicated by iscsi_conn_stop completion 2. Flush errors processing Each completed stage will notify a waiting worker thread when it is done to allow teardwon continuation. Since iSCSI connection establishment may trigger endpoint disconnect without a successful endpoint connect, we rely on the iscsi <-> iser binding (.conn_bind) to learn about the teardown policy we should take wrt cleanup stages. Since all cleanup worker threads are scheduled (release_wq) in .ep_disconnect it is safe to assume that when module_exit is called, all cleanup workers are already scheduled. Thus proper module unload shall flush all scheduled works before allowing safe exit, to guarantee no resources got left behind. Signed-off-by: Ariel Nahum <arieln@mellanox.com> Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-04-01IB/iser: Bump driver version to 1.3Or Gerlitz1-1/+1
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-04-01IB/iser: Update Mellanox copyright noteOr Gerlitz1-1/+1
Update Mellanox copyrights for 2014 on the iser initiator driver. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-04-01IB/iser: Remove struct iscsi_iser_connAriel Nahum1-8/+2
The iscsi stack has existing mechanisms to link back and forth between the iscsi connection and the iscsi transport (e.g iser/tcp) connection. This is done through a dd_data pointer field in struct iscsi_conn which can be set to point to the transport connection, etc. The iscsi_iser_conn structure was used to get this linking done in another way, which is uneeded and adds extra complication to the iser code, so we just remove it. Signed-off-by: Ariel Nahum <arieln@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-03-18IB/iser: Implement check_protectionSagi Grimberg1-0/+2
Once the iSCSI transaction is completed we must implement check_protection in order to notify on DIF errors that may have occured. The routine boils down to calling ib_check_mr_status to get the signature status of the transaction. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Alex Tabachnik <alext@mellanox.com> Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-03-18IB/iser: Support T10-PI operationsSagi Grimberg1-0/+9
Add logic to initialize protection information entities. Upon each iSCSI task, we keep the scsi_cmnd in order to query the scsi protection operations and reference to protection buffers. Modify iser_fast_reg_mr to receive indication whether it is registering the data or protection buffers. In addition introduce iser_reg_sig_mr which performs fast registration work-request for a signature enabled memory region (IB_WR_REG_SIG_MR). In this routine we set all the protection relevants for the device to offload protection data-transfer and verification. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Alex Tabachnik <alext@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-03-18IB/iser: Initialize T10-PI resourcesAlex Tabachnik1-1/+20
During connection establishment we also initialize T10-PI resources (QP, PI contexts) in order to support SCSI's protection operations. Signed-off-by: Alex Tabachnik <alext@mellanox.com> Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-03-18IB/iser: Introduce pi_enable, pi_guard module parametersAlex Tabachnik1-0/+3
Use modparams to activate protection information support. pi_enable bool: Based on this parameter iSER will know if it should support T10-PI. We don't want to do this by default as it requires to allocate and initialize extra resources. In case pi_enable=N, iSER won't publish to SCSI midlayer any DIF capabilities. pi_guard int: Based on this parameter iSER will publish DIX guard type support to SCSI midlayer. 0 means CRC is allowed to be passed in DIX buffers, 1 (or non-zero) means IP-CSUM is allowed to be passed in DIX buffers. Note that over the wire, only CRC is allowed. In the next phase, it is worth considering passing these parameters from iscsid via nlmsg. This will allow these parameters to be connection based rather than global. Signed-off-by: Alex Tabachnik <alext@mellanox.com> Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-29 14:57:38 +0300