summaryrefslogtreecommitdiff
path: root/drivers/infiniband/sw/rxe/rxe_net.c
AgeCommit message (Collapse)AuthorFilesLines
2021-08-30Merge branch 'sg_nents' into rdma.git for-nextJason Gunthorpe1-0/+1
From Maor Gottlieb ==================== Fix the use of nents and orig_nents in the sg table append helpers. The nents should be used by the DMA layer to store the number of DMA mapped sges, the orig_nents is the number of CPU sges. Since the sg append logic doesn't always create a SGL with exactly orig_nents entries store a total_nents as well to allow the table to be properly free'd and reorganize the freeing logic to share across all the use cases. ==================== Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> * 'sg_nents': RDMA: Use the sg_table directly and remove the opencoded version from umem lib/scatterlist: Fix wrong update of orig_nents lib/scatterlist: Provide a dedicated function to support table append
2021-08-02RDMA/rxe: Restore setting tot_len in the IPv4 headerBob Pearson1-0/+1
An earlier patch removed setting of tot_len in IPv4 headers because it was also set in ip_local_out. However, this change resulted in an incorrect ICRC being computed because the tot_len field is not masked out. This patch restores that line. This fixes the bug reported by Zhu Yanjun. This bug affects anyone using rxe which is currently broken. Fixes: 230bb836ee88 ("RDMA/rxe: Fix redundant call to ip_send_check") Link: https://lore.kernel.org/r/20210729220039.18549-3-rpearsonhpe@gmail.com Reported-by: Zhu Yanjun <zyjzyj2000@gmail.com> Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com> Reviewed-and-tested-by: Zhu Yanjun <zyjzyj2000@gmail.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-07-16RDMA/rxe: Move ICRC generation to a subroutineBob Pearson1-3/+3
Isolate ICRC generation into a single subroutine named rxe_generate_icrc() in rxe_icrc.c. Remove scattered crc generation code from elsewhere. Link: https://lore.kernel.org/r/20210707040040.15434-5-rpearsonhpe@gmail.com Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-07-16RDMA/rxe: Fixup rxe_send and rxe_loopbackBob Pearson1-14/+14
Fixup rxe_send() and rxe_loopback() in rxe_net.c to have the same calling sequence. This patch makes them static and have the same parameter list and return value. Link: https://lore.kernel.org/r/20210707040040.15434-4-rpearsonhpe@gmail.com Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-07-16RDMA/rxe: Move rxe_xmit_packet to a subroutineBob Pearson1-0/+43
rxe_xmit_packet() was an overlong inline subroutine. This patch moves it into rxe_net.c as an ordinary subroutine. Link: https://lore.kernel.org/r/20210707040040.15434-3-rpearsonhpe@gmail.com Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com> Reviewed-by: Zhu Yanjun <zyjzyj2000@gmail.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-06-22RDMA/rxe: Fix redundant skb_put_zeroBob Pearson1-1/+1
rxe_init_packet() in rxe_net.c calls skb_put_zero() to reserve space for the payload and zero it out. All these bytes are then re-written with RoCE headers and payload. Remove this useless extra copy. Fixes: ecb238f6a7f3 ("IB/cxgb4: use skb_put_zero()/__skb_put_zero") Link: https://lore.kernel.org/r/20210618045742.204195-7-rpearsonhpe@gmail.com Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-06-22RDMA/rxe: Fix redundant call to ip_send_checkBob Pearson1-2/+0
For IPV4 packets sent on the wire the rxe driver calls ip_local_out() which immediately calls __ip_local_out() which sets iph->tot_len and calls ip_send_check(). This code is duplicated in prepare4(). On the loopback path the IP header checksum and tot_len fields are not used so they do not need to be set. Remove this redundant code. Fixes: 8700e3e7c485 ("Soft RoCE driver") Link: https://lore.kernel.org/r/20210618045742.204195-3-rpearsonhpe@gmail.com Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-06-03RDMA/rxe: Fix failure during driver loadKamal Heib1-3/+7
To avoid the following failure when trying to load the rdma_rxe module while IPv6 is disabled, add a check for EAFNOSUPPORT and ignore the failure, also delete the needless debug print from rxe_setup_udp_tunnel(). $ modprobe rdma_rxe modprobe: ERROR: could not insert 'rdma_rxe': Operation not permitted Fixes: dfdd6158ca2c ("IB/rxe: Fix kernel panic in udp_setup_tunnel") Link: https://lore.kernel.org/r/20210603090112.36341-1-kamalheib1@gmail.com Reported-by: Yi Zhang <yi.zhang@redhat.com> Signed-off-by: Kamal Heib <kamalheib1@gmail.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-03-05RDMA/rxe: Fix missed IB reference counting in loopbackBob Pearson1-1/+9
When the noted patch below extending the reference taken by rxe_get_dev_from_net() in rxe_udp_encap_recv() until each skb is freed it was not matched by a reference in the loopback path resulting in underflows. Fixes: 899aba891cab ("RDMA/rxe: Fix FIXME in rxe_udp_encap_recv()") Link: https://lore.kernel.org/r/20210304192048.2958-1-rpearson@hpe.com Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-02-18Merge tag 'v5.11' into rdma.git for-nextJason Gunthorpe1-0/+3
Linux 5.11 Merged to resolve conflicts with RDMA rc commits - drivers/infiniband/sw/rxe/rxe_net.c The final logic is to call rxe_get_dev_from_net() again with the master netdev if the packet was rx'd on a vlan. To keep the elimination of the local variables requires a trivial edit to the code in -rc Link: https://lore.kernel.org/r/20210210131542.215ea67c@canb.auug.org.au Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-02-08RDMA/rxe: Fix FIXME in rxe_udp_encap_recv()Bob Pearson1-7/+5
rxe_udp_encap_recv() drops the reference to rxe->ib_dev taken by rxe_get_dev_from_net() which should be held until each received skb is freed. This patch moves the calls to ib_device_put() to each place a received skb is freed. It also takes references to the ib_device for each cloned skb created to process received multicast packets. Fixes: 4c173f596b3f ("RDMA/rxe: Use ib_device_get_by_netdev() instead of open coding") Link: https://lore.kernel.org/r/20210128233318.2591-1-rpearson@hpe.com Signed-off-by: Bob Pearson <rpearson@hpe.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-02-05RDMA/rxe: Correct skb on loopback pathBob Pearson1-0/+5
rxe_net.c sends packets at the IP layer with skb->data pointing at the IP header but receives packets from a UDP tunnel with skb->data pointing at the UDP header. On the loopback path this was not correctly accounted for. This patch corrects for this by using sbk_pull() to strip the IP header from the skb on received packets. Fixes: 8700e3e7c485 ("Soft RoCE driver") Link: https://lore.kernel.org/r/20210128182301.16859-1-rpearson@hpe.com Signed-off-by: Bob Pearson <rpearson@hpe.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-01-20Revert "RDMA/rxe: Remove VLAN code leftovers from RXE"Martin Wilck1-0/+6
This reverts commit b2d2440430c0fdd5e0cad3efd6d1c9e3d3d02e5b. It's true that creating rxe on top of 802.1q interfaces doesn't work. Thus, commit fd49ddaf7e26 ("RDMA/rxe: prevent rxe creation on top of vlan interface") was absolutely correct. But b2d2440430c0 was incorrect assuming that with this change, RDMA and VLAN don't work togehter at all. It just has to be set up differently. Rather than creating rxe on top of the VLAN interface, rxe must be created on top of the physical interface. RDMA then works just fine through VLAN interfaces on top of that physical interface, via the "upper device" logic. This is hard to see in the rxe logic because it never talks about vlan, but instead rxe carefully selects upper vlan netdevices when working with packets which in turn imply certain vlan tagging. This is all done correctly and interacts with the gid table with VLAN support the same as real HW does. b2d2440430c0 broke this setup deliberately and should thus be reverted. Also, b2d2440430c0 removed rxe_dma_device(), so adapt the revert to discard that hunk. Fixes: b2d2440430c0 ("RDMA/rxe: Remove VLAN code leftovers from RXE") Link: https://lore.kernel.org/r/20210120161913.7347-1-mwilck@suse.com Signed-off-by: Martin Wilck <mwilck@suse.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-11-23RDMA/siw,rxe: Make emulated devices virtual in the device treeJason Gunthorpe1-9/+0
This moves siw and rxe to be virtual devices in the device tree: lrwxrwxrwx 1 root root 0 Nov 6 13:55 /sys/class/infiniband/rxe0 -> ../../devices/virtual/infiniband/rxe0/ Previously they were trying to parent themselves to the physical device of their attached netdev, which doesn't make alot of sense. My hope is this will solve some weird syzkaller hits related to sysfs as it could be possible that the parent of a netdev is another netdev, eg under bonding or some other syzkaller found netdev configuration. Nesting a ib_device under anything but a physical device is going to cause inconsistencies in sysfs during destructions. Link: https://lore.kernel.org/r/0-v1-dcbfc68c4b4a+d6-virtual_dev_jgg@nvidia.com Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-11-17Merge branch 'for-rc' into rdma.gitJason Gunthorpe1-1/+1
From https://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma.git The rc RDMA branch is needed due to dependencies on the next patches. Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-11-12RDMA/rxe: Remove VLAN code leftovers from RXEZhu Yanjun1-9/+0
Since the commit fd49ddaf7e26 ("RDMA/rxe: prevent rxe creation on top of vlan interface") does not permit rxe on top of vlan device, all the stuff related with vlan should be removed. Fixes: fd49ddaf7e26 ("RDMA/rxe: prevent rxe creation on top of vlan interface") Link: https://lore.kernel.org/r/1604326422-18625-1-git-send-email-yanjunz@nvidia.com Signed-off-by: Zhu Yanjun <yanjunz@nvidia.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-10-27RDMA/rxe: Fix small problem in network_type patchBob Pearson1-1/+1
The patch referenced below has a typo that results in using the wrong L2 header size for outbound traffic. (V4 <-> V6). It also breaks kernel-side RC traffic because they use AVs that use RDMA_NETWORK_XXX enums instead of RXE_NETWORK_TYPE_XXX enums. Fix this by transcoding between these enum types. Fixes: e0d696d201dd ("RDMA/rxe: Move the definitions for rxe_av.network_type to uAPI") Link: https://lore.kernel.org/r/20201016211343.22906-1-rpearson@hpe.com Signed-off-by: Bob Pearson <rpearson@hpe.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-10-16RDMA/rxe: Move the definitions for rxe_av.network_type to uAPIJason Gunthorpe1-4/+4
RXE was wrongly using an internal kernel enum as part of its uAPI, split this out into a dedicated uAPI enum just for RXE. It only uses the IPv4 and IPv6 values. This was exposed by changing the internal kernel enum definition which broke RXE. Fixes: 1c15b4f2a42f ("RDMA/core: Modify enum ib_gid_type and enum rdma_network_type") Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-08-31RDMA/rxe: Add SPDX hdrs to rxe source filesBob Pearson1-28/+1
Add SPDX headers to all rxe .c and .h files. Link: https://lore.kernel.org/r/20200827145439.2273-1-rpearson@hpe.com Signed-off-by: Bob Pearson <rpearson@hpe.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-08-27RDMA/rxe: Fix style warningsBob Pearson1-1/+1
Fixed several minor checkpatch warnings in existing rxe source. Link: https://lore.kernel.org/r/20200820224638.3212-3-rpearson@hpe.com Signed-off-by: Bob Pearson <rpearson@hpe.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-07-16RDMA/rxe: Remove rxe_link_layer()Kamal Heib1-5/+0
Instead of returning IB_LINK_LAYER_ETHERNET from rxe_link_layer, return it directly from get_link_layer callback and remove rxe_link_layer(). Fixes: 8700e3e7c485 ("Soft RoCE driver") Link: https://lore.kernel.org/r/20200705104313.283034-5-kamalheib1@gmail.com Signed-off-by: Kamal Heib <kamalheib1@gmail.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2019-12-04net: ipv6_stub: use ip6_dst_lookup_flow instead of ip6_dst_lookupSabrina Dubroca1-3/+5
ipv6_stub uses the ip6_dst_lookup function to allow other modules to perform IPv6 lookups. However, this function skips the XFRM layer entirely. All users of ipv6_stub->ip6_dst_lookup use ip_route_output_flow (via the ip_route_output_key and ip_route_output helpers) for their IPv4 lookups, which calls xfrm_lookup_route(). This patch fixes this inconsistent behavior by switching the stub to ip6_dst_lookup_flow, which also calls xfrm_lookup_route(). This requires some changes in all the callers, as these two functions take different arguments and have different return types. Fixes: 5f81bd2e5d80 ("ipv6: export a stub for IPv6 symbols used by vxlan") Reported-by: Xiumei Mu <xmu@redhat.com> Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-03RDMA/rxe: Use rdma_read_gid_attr_ndev_rcu to access netdevParav Pandit1-3/+12
Use rdma_read_gid_attr_ndev_rcu() to access netdevice attached to GID entry under rcu lock. This ensures that while working on the netdevice of the GID, it doesn't get freed. Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-03RDMA/rxe: Consider skb reserve space based on netdev of GIDParav Pandit1-1/+2
Always consider the skb reserve space based on netdevice of the GID attribute, regardless of vlan or non vlan netdevice. Fixes: 43c9fc509fa5 ("rdma_rxe: make rxe work over 802.1q VLAN devices") Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-03-27IB/rxe: Replace av->network_type with skb->protocolZhu Yanjun1-16/+12
In the function rxe_init_packet, based on av->network_type, skb->protocol is set to ipv4 or ipv6. The functions rxe_prepare and rxe_send are called after the functin rxe_init_packet. So in these functions, av->network_type can be replaced with skb->protocol. The functions are in the xmit fast path. So with skb->protocol, the performance will be better. Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-20rdma_rxe: Use netlink messages to add/delete linksSteve Wise1-2/+2
Add support for the RDMA_NLDEV_CMD_NEWLINK/DELLINK messages which allow dynamically adding new RXE links. Deprecate the old module options for now. Cc: Moni Shoua <monis@mellanox.com> Reviewed-by: Yanjun Zhu <yanjun.zhu@oracle.com> Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-20RDMA/rxe: Close a race after ib_register_deviceJason Gunthorpe1-4/+4
Since rxe allows unregistration from other threads the rxe pointer can become invalid any moment after ib_register_driver returns. This could cause a user triggered use after free. Add another driver callback to be called right after the device becomes registered to complete any device setup required post-registration. This callback has enough core locking to prevent the device from becoming unregistered. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-20RDMA/rxe: Add ib_device_get_by_name() and use it in rxeJason Gunthorpe1-22/+0
rxe has an open coded version of this that is not as safe as the core version. This lets us eliminate the internal device list entirely from rxe. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-20RDMA/rxe: Use driver_unregister and new unregistration APIJason Gunthorpe1-19/+2
rxe does not have correct locking for its registration/unregistration paths, use the core code to handle it instead. In this mode ib_unregister_device will also do the dealloc, so rxe is required to do clean up from a callback. The core code ensures that unregistration is done only once, and generally takes care of locking and concurrency problems for rxe. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-20RDMA/rxe: Use ib_device_get_by_netdev() instead of open codingJason Gunthorpe1-24/+15
The core API handles the locking correctly and is faster if there are multiple devices. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-05RDMA/rxe: Improve loopback markingKamal Heib1-6/+3
Currently a packet is marked for loopback only if the source and destination addresses equals. This is not enough when multiple gids are present in rxe device's gid table and the traffic is from one gid to another. Fix it by marking the packet for loopback if the destination MAC address is equal to the source MAC address. Signed-off-by: Kamal Heib <kamalheib1@gmail.com> Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com> Tested-by: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-01-31RDMA: Provide safe ib_alloc_device() functionLeon Romanovsky1-1/+1
All callers to ib_alloc_device() provide a larger size than struct ib_device and rely on the fact that struct ib_device is embedded in their driver specific structure as the first member. Provide a safer variant of ib_alloc_device() that checks and enforces this approach to make sure the drivers are using it right. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-12-21IB/rxe: Reuse code which sets port stateYuval Shaia1-4/+9
Same code is executed in both rxe_param_set_add and rxe_notify functions. Make one function and call it from both places. Since both callers already have a rxe object use it directly instead of deriving it from the net device. Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com> Reviewed-by: Steve Wise <swise@opengridcomputing.com>  Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-11-09RDMA/rxe: Add link_down, rdma_sends, rdma_recvs stats countersAndrew Boyer1-0/+1
link_down is self-explanatory. rdma_sends and rdma_recvs count the number of RDMA Send and RDMA Receive operations completed successfully. This is different from the existing sent_pkts and rcvd_pkts counters because the existing counters measure packets, not RDMA operations. ack_deffered is renamed to ack_deferred to fix the spelling. out_of_sequence is renamed to out_of_seq_request to make clear that it is counting only requests and not other packets which can be out of sequence. Signed-off-by: Andrew Boyer <andrew.boyer@dell.com> Signed-off-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-11-09RDMA/rxe: Distinguish between down links and disabled linksAndrew Boyer1-2/+0
In ib_query_port(), use the netdev's IFF_UP flag to determine phys_state (flag set = down = POLLING, flag clear = disabled = DISABLED). Callers can then use the phys_state field to distinguish between links which have a dead partner, cable missing, etc., from links which are turned off on the local node. This is useful for HA and supportability. Signed-off-by: Andrew Boyer <andrew.boyer@dell.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-10-04RDMA/rxe: Remove unused addr_same()Kamal Heib1-5/+0
This function is not in use - delete it. Signed-off-by: Kamal Heib <kamalheib1@gmail.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-09-26RDMA/drivers: Use dev_name instead of ibdev->nameJason Gunthorpe1-1/+1
These return the same thing but dev_name is a more conventional use of the kernel API. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
2018-09-26RDMA/drivers: Use dev_err/dbg/etc instead of pr_* + ibdev->nameJason Gunthorpe1-2/+2
Kernel convention is that a driver for a subsystem will print using dev_* on the subsystem's struct device, or with dev_* on the physical device. Drivers should rarely use a pr_* function. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-08-30IB/rxe: Simplify rxe_find_route() to avoid GID query for netdevParav Pandit1-20/+10
rxe_prepare() is called on an skb which has ndev already initialized by rxe_init_packet(). Therefore avoid querying the GID attribute again and use the available netdevice from the skb->dev. Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Daniel Jurgens <danielj@mellanox.com> Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com> Tested-by: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-08-30IB/rxe: vary the source udp port for receive scalingVijay Immanuel1-4/+4
Select the source udp port number for a QP based on the source QPN. This provides a better spread of traffic across NIC RX queues for RC/UC QPs. Signed-off-by: Vijay Immanuel <vijayi@attalasystems.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-06-29IB/rxe: don't clear the tx queue on every transferVijay Immanuel1-10/+7
Do not call sk_dst_set() on every packet transfer because that calls sk_tx_queue_clear(), which clears the tx queue. A QP must stay on the same tx queue to maintain packet order. Signed-off-by: Vijay Immanuel <vijayi@attalasystems.com> Acked-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-06-18IB/rxe: Use rdma GID APIParav Pandit1-34/+16
rxe_netdev_from_av can now be done by the core code directly from the gid_attrs, no need for a helper in the driver. ib_find_cached_gid_by_port can be switched to use the rdma version here as well. Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-05-28IB/rxe: avoid unnecessary exportZhu Yanjun1-1/+0
The function rxe_remove_all is only used in this modules. There is no other modules that call this function. So it is not necessary to export it. Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-05-01IB/cxgb4: use skb_put_zero()/__skb_put_zeroYueHaibing1-3/+1
Use the recently introduced helper to replace the pattern of skb_put_zero/__skb_put() && memset(). Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-04-27IB/rxe: Change rxe_rcv to return voidYuval Shaia1-3/+6
It always returns 0. Change return type to void. Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com> Reviewed-by: Zhu Yanjun <yanjun.zhu@oracle.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-04-19IB/rxe: make rxe_release_udp_tunnel staticZhu Yanjun1-1/+1
The function rxe_release_udp_tunnel is only used in rxe_net.c. So it is necessary to make this function as static. CC: Srinivas Eeda <srinivas.eeda@oracle.com> CC: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com> Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-04-18IB/rxe: make the variable staticZhu Yanjun1-1/+1
The variable rxe_net_notifier is only used in the file rxe_net.c. So remove it from rxe_net.h file and make it static in the file rxe_net.c. CC: Srinivas Eeda <srinivas.eeda@oracle.com> CC: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com> Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-14rdma_rxe: make rxe work over 802.1q VLAN devicesMartin Wilck1-6/+48
This patch fixes RDMA/rxe over 802.1q VLAN devices. Without it, I observed the following behavior: a) adding a VLAN device to RXE via rxe_net_add() creates a non-functional RDMA device. This is caused by the logic in enum_all_gids_of_dev_cb() / is_eth_port_of_netdev(), which only considers networks connected to "upper devices" of the configured network device, resulting in an empty set of gids for a VLAN interface that is an "upper device" itself. Later attempts to connect via this rdma device fail in cma_acuire_dev() because no gids can be resolved. b) adding the master device of the VLAN device instead seems to work initially, target addresses via VLAN devices are resolved successfully. But the connection times out because no 802.1q VLAN headers are inserted in the ethernet packets, which are therefore never received. This happens because the RXE layer sends the packets via the master device rather than the VLAN device. The problem could be solved by changing either a) or b). My thinking was that the logic in a) was created deliberately, thus I decided to work on b). It turns out that the information about the VLAN interface for the gid at hand is available in the AV information. My patch converts the RXE code to use this netdev instead of rxe->ndev. With this change, RXE over vlan works on my test system. Signed-off-by: Martin Wilck <mwilck@suse.com> Reviewed-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-03-08IB/rxe: remove unnecessary rxe in rxe_sendZhu Yanjun1-1/+1
In the function rxe_send, the variable rxe is not used in it. So it should be removed. CC: Srinivas Eeda <srinivas.eeda@oracle.com> CC: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-01-09IB/rxe: remove unnecessary skb_clone in xmitZhu Yanjun1-11/+5
In xmit, there is a skb_clone. This function copies the struct sk_buff. And some parameters are changed to the new skb. Then the new skb is sent while the old skb is freed. While the function skb_clone is removed, the parameter changes are made on the old skb, then the old skb is sent. It can also work well. The following tests are made. server client --------- --------- |1.1.1.1|<----rxe-channel--->|1.1.1.2| --------- --------- On server: rping -s -a 1.1.1.1 -v -C 1000 -S 512 On client: rping -c -a 1.1.1.1 -v -C 1000 -S 512 The kernel config CONFIG_DEBUG_KMEMLEAK is enabled on both server and client. This test runs for several hours. There is no memory leak and the whole system can work well. As the above network, the following tests are made. Server: ibv_rc_pingpong -d rxe0 -g 1 Client: ibv_rc_pingpong -d rxe0 -g 1 1.1.1.1 The result on Server. Before: 8192000 bytes in 0.88 seconds = 74.36 Mbit/sec 1000 iters in 0.88 seconds = 881.30 usec/iter After: 8192000 bytes in 0.81 seconds = 81.15 Mbit/sec 1000 iters in 0.81 seconds = 807.62 usec/iter The throughput is enhanced and the latency is reduced. CC: Srinivas Eeda <srinivas.eeda@oracle.com> CC: Joe Jin <joe.jin@oracle.com> CC: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-04 18:49:23 +0300