summaryrefslogtreecommitdiff
path: root/drivers/infiniband/hw
AgeCommit message (Collapse)AuthorFilesLines
2014-02-14IB/mlx4: Make sure GID index 0 is always occupiedMoni Shoua1-24/+68
Make sure that for Ethernet ports, the port GID table index 0 is always occupied with a default GID of the relevant IPv6 link-local adderss. This provides better user experience for legacy applications that don't use the RDMA CM and were working on index 0 prior to the IP addressing change. Also, as GIDs are generated from IP addresses of the network devices that are associated with the port, it's basically possible that the GID table will be empty if no IP address was assigned. This doesn't comply with the IB spec section 4.1.1 "GID usage and properties". Signed-off-by: Moni Shoua <monis@mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-02-13IB/mlx4: Don't allocate range of steerable UD QPs for Ethernet-only deviceMatan Barak1-1/+6
When the device has only Ethernet ports, don't try to allocate range of steerable UD QPs since they aren't needed. This fixes an issue where mlx4 VFs tried to allocate a range of UD steerable QPs, but failed to do so. Fixes: c1c98501121e ("IB/mlx4: Add support for steerable IB UD QPs") Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-23Merge branch 'ip-roce' into for-nextRoland Dreier18-326/+504
Conflicts: drivers/infiniband/hw/mlx4/main.c
2014-01-23Merge branches 'cma', 'cxgb4', 'flowsteer', 'ipoib', 'misc', 'mlx4', 'mlx5', ↵Roland Dreier43-93/+6355
'ocrdma', 'qib', 'srp' and 'usnic' into for-next
2014-01-23IB/mlx5: Verify reserved fields are clearedEli Cohen1-2/+6
Verify that reserved fields in struct mlx5_ib_resize_cq are cleared before continuing execution of the verb. This is required to allow making use of this area in future revisions. Signed-off-by: Yann Droneaud <ydroneaud@opteya.com> Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-23IB/mlx5: Allow creation of QPs with zero-length work queuesEli Cohen1-20/+29
The current code attmepts to call ib_umem_get() even if the length is zero, which causes a failure. Since the spec allows zero length work queues, change the code so we don't call ib_umem_get() in those cases. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-23IB/mlx5: Add support for resize CQEli Cohen3-18/+270
Implement resize CQ which is a mandatory verb in mlx5. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-23IB/mlx5: Implement modify CQEli Cohen1-1/+25
Modify CQ is used by ULPs like IPoIB to change moderation parameters. This patch adds support in mlx5. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-23IB/mlx5: Make sure doorbell record is visible before doorbellEli Cohen1-0/+4
Put a wmb() to make sure the doorbell record is visible to the HCA before we hit doorbell. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-23RDMA/nes: Slight optimization of Ethernet address compareDing Tianhong1-2/+1
Use the possibly more efficient ether_addr_equal() instead of memcmp(). Signed-off-by: Wang Weidong <wangweidong1@huawei.com> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-23IB/qib: Fix QP check when looping back to/from QP1Ira Weiny1-1/+8
The GSI QP type is compatible with and should be allowed to send data to/from any UD QP. This was found when testing ibacm on the same node as an SA. Cc: <stable@vger.kernel.org> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-23RDMA/cxgb4: Fix gcc warning on 32-bit archPaul Bolle1-1/+1
Building mem.o for 32 bits x86 triggers a GCC warning: drivers/infiniband/hw/cxgb4/mem.c: In function '_c4iw_write_mem_dma_aligned': drivers/infiniband/hw/cxgb4/mem.c:79:25: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] Silence that warning by casting "&wr_wait" to unsigned long before casting it to __be64. That's what _c4iw_write_mem_inline() already does. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Acked-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-23IB/usnic: Remove unused includes of <linux/version.h>Wei Yongjun3-3/+0
Remove including <linux/version.h> that don't need it. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-23RDMA/amso1100: Add check if cache memory was allocated before freeing itSvetlana Mavrina1-1/+2
There is a path in handle_vq() where kmem_cache_free() can be called with pointer to a local variable. It can happen if vq_repbuf_alloc() failed to allocate memory from cache and req is NULL. The patch adds check if cache memory was allocated before freeing it. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Svetlana Mavrina <another.karnil@gmail.com> Reviewed-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-21IB/usnic: Use GFP_ATOMIC under spinlockDan Carpenter1-1/+1
This is called from qp_grp_and_vf_bind() and we are holding the vf->lock so the allocation can't sleep. Fixes: e3cf00d0a87f ('IB/usnic: Add Cisco VIC low-level hardware driver') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-20IB/mlx4: Use IS_ENABLED(CONFIG_IPV6)Roland Dreier1-6/+6
...instead of testing defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE) Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-20RDMA/ocrdma: Add dependency on INETRoland Dreier1-1/+1
Now that ocrdma supports IP-based addressing, we need to depend on INET, since ocrdma registers itself for net device events. Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-20RDMA/ocrdma: Move ocrdma_inetaddr_event outside of "#if CONFIG_IPV6"Roland Dreier1-4/+4
This fixes the build if IPV6 isn't enabled. Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-20IB/mlx4: Add dependency INETMatan Barak1-1/+1
Since mlx4_ib supports IP based addressing, a dependency on INET needs to be added, since mlx4_ib registers itself for net device events. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-20RDMA/ocrdma: Populate GID table with IP based gidsMoni Shoua2-99/+41
This patch is similar in spirit to the "IB/mlx4: Use IBoE (RoCE) IP based GIDs in the port GID table" patch. Changes to inet4 and inet6 addresses for the host are monitored and if the address is associated with an ocrdma device then a gid is added or deleted from the device's gid table. The gid format will be a IPv4 to IPv6 mapped or the IPv6 address. Cc: Naresh Gottumukkala <bgottumukkala@emulex.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-20RDMA/ocrdma: Handle Ethernet L2 parameters for IP based GID addressingMoni Shoua4-22/+17
This patch is similar in spirit to the "IB/mlx4: Handle Ethernet L2 parameters for IP based GID addressing". It handles the fact that IP based RoCE gids don't store Ethernet L2 parameters, MAC and VLAN. When building an address handle, instead of parsing the dgid to get the MAC and VLAN, take them from the address handle attributes. Cc: Naresh Gottumukkala <bgottumukkala@emulex.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-19IB/mlx4: Handle Ethernet L2 parameters for IP based GID addressingMoni Shoua4-58/+99
IP based RoCE gids don't store Ethernet L2 parameters, MAC and VLAN. Therefore, we need to extract them from the CQE and place them in struct ib_wc (to be used for cases were they were taken from the gid). Also, when modifying a QP or building address handle, instead of parsing the dgid to get the MAC and VLAN, take them from the address handle attributes. Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-19IB/mlx4: Use IBoE (RoCE) IP based GIDs in the port GID tableMoni Shoua2-143/+334
Currently, the mlx4 driver set IBoE (RoCE) gids to encode related Ethernet netdevice interface MAC address and possibly VLAN id. Change this scheme such that gids encode interface IP addresses (both IP4 and IPv6). This requires learning the IP addresses which are of use by a netdevice associated with the HCA port, formatting them to gids and adding them to the port gid table. Furthermore, events of add and delete address are caught to maintain the gid table accordingly. Associated IP addresses may belong to a master of an Ethernet netdevice on top of that port so this should be considered when building and maintaining the gid table. Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-19IB/mlx4: Fix error return codeJulia Lawall1-2/+6
Set the return variable to an error code as done elsewhere in the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-19IB/usnic: Remove unused variable in usnic_debugfs_exit()Wei Yongjun1-4/+0
The variable qp_grp is initialized but never used otherwise, so remove the unused variable. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-19IB/usnic: Set userspace/kernel ABI ver to 4Upinder Malhi1-1/+1
usNIC userspace/kernel ABI should be set to 4 instead of 3. Signed-off-by: Upinder Malhi <umalhi@cisco.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-19IB/usnic: Advertise usNIC devices as RDMA_NODE_USNIC_UDPUpinder Malhi1-1/+1
usNIC default transport is UDP. Hence, advertise RDMA_NODE_USNIC_UDP by default for usNIC devices. Signed-off-by: Upinder Malhi <umalhi@cisco.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-19IB/usnic: Add dependency on CONFIG_INETUpinder Malhi1-1/+1
usNIC needs inet notifiers to function correctly, so add a Kconfig dependency on CONFIG_INET. Signed-off-by: Upinder Malhi <umalhi@cisco.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-19IB/usnic: Fix endianness-related warningsUpinder Malhi2-3/+2
Fix sparse endianness related warnings. Signed-off-by: Upinder Malhi <umalhi@cisco.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-15IB/core: Ethernet L2 attributes in verbs/cm structuresMatan Barak7-8/+16
This patch add the support for Ethernet L2 attributes in the verbs/cm/cma structures. When dealing with L2 Ethernet, we should use smac, dmac, vlan ID and priority in a similar manner that the IB L2 (and the L4 PKEY) attributes are used. Thus, those attributes were added to the following structures: * ib_ah_attr - added dmac * ib_qp_attr - added smac and vlan_id, (sl remains vlan priority) * ib_wc - added smac, vlan_id * ib_sa_path_rec - added smac, dmac, vlan_id * cm_av - added smac and vlan_id For the path record structure, extra care was taken to avoid the new fields when packing it into wire format, so we don't break the IB CM and SA wire protocol. On the active side, the CM fills. its internal structures from the path provided by the ULP. We add there taking the ETH L2 attributes and placing them into the CM Address Handle (struct cm_av). On the passive side, the CM fills its internal structures from the WC associated with the REQ message. We add there taking the ETH L2 attributes from the WC. When the HW driver provides the required ETH L2 attributes in the WC, they set the IB_WC_WITH_SMAC and IB_WC_WITH_VLAN flags. The IB core code checks for the presence of these flags, and in their absence does address resolution from the ib_init_ah_from_wc() helper function. ib_modify_qp_is_ok is also updated to consider the link layer. Some parameters are mandatory for Ethernet link layer, while they are irrelevant for IB. Vendor drivers are modified to support the new function signature. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-15IB/mlx4: Add support for steerable IB UD QPsMatan Barak3-7/+163
This patch adds support for steerable (NETIF) QP creation. When we create the device, we allocate a range of steerable QPs. Afterward when a QP is created with the NETIF flag, it's allocated from this range. Allocation is managed by bitmap allocator. Internal steering rules for those QPs is automatically generated on their creation. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-15IB/mlx4: Add mechanism to support flow steering over IB linksMatan Barak1-1/+134
The mlx4 device requires adding IB flow spec to rules that apply over infiniband link layer. This patch adds a mechanism to add such a rule. If higher levels e.g. IP/UDP/TCP flow specs are provided, the device requires us to add an empty wild-carded IB rule. Furthermore, the device requires the QPN to be put in the rule. Add here specific parsing support for IB empty rules and the ability to self-generate missing specs based on existing ones. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-15IB/mlx4: Enable device-managed steering support for IB ports tooMatan Barak2-12/+20
Up until now, flow steering wasn't supported when using IB ports. This patch enables support for flow steering if all hardware ports support that, for example the new MLX4_DEV_CAP_FLAG2_DMFS_IPOIB mlx4 device capability. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-15IB/mlx5: Fix micro UAR allocatorEli Cohen2-24/+66
The micro UAR (uuar) allocator had a bug which resulted from the fact that in each UAR we only have two micro UARs avaialable, those at index 0 and 1. This patch defines iterators to aid in traversing the list of available micro UARs when allocating a uuar. In addition, change the logic in create_user_qp() so that if high class allocation fails (high class means lower latency), we revert to medium class and not to the low class. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-15IB/mlx5: Remove unused code in mr.cEli Cohen2-2/+0
The variable start in struct mlx5_ib_mr is never used. Remove it. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-14IB/usnic: Append documentation to usnic_transport.h and cleanupUpinder Malhi2-1/+4
Add comment describing usnic_transport_rsrv port and remove extraneous space from usnic_transport.c. Signed-off-by: Upinder Malhi <umalhi@cisco.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-14IB/usnic: Fix typo "Ignorning" -> "Ignoring"Roland Dreier1-4/+4
Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-14IB/usnic: Expose flows via debugfsUpinder Malhi6-10/+111
Signed-off-by: Upinder Malhi <umalhi@cisco.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-14IB/usnic: Use for_each_sg instead of a for-loopUpinder Malhi1-8/+9
Use for_each_sg() instead of an explicit for-loop to iterate over scatter-gather list. Signed-off-by: Upinder Malhi <umalhi@cisco.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-14IB/usnic: Remove superflous parenthesesUpinder Malhi3-14/+14
Signed-off-by: Upinder Malhi <umalhi@cisco.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-14IB/usnic: Add UDP support in usnic_ib_qp_grp.[hc]Upinder Malhi2-0/+99
UDP support for qp_grps/qps. Signed-off-by: Upinder Malhi <umalhi@cisco.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-14IB/usnic: Add UDP support in u*verbs.c, u*main.c and u*util.hUpinder Malhi3-9/+136
Add supports for: 1) Parsing the socket file descriptor pass down from userspace. 2) IP notifiers 3) Encoding the IP in the GID 4) Other aux. changes to support UDP Signed-off-by: Upinder Malhi <umalhi@cisco.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-14IB:usnic: Add UDP support to usnic_transport.[hc]Upinder Malhi2-7/+105
This patch provides API for rest of usNIC code to increment or decrement socket's reference count. Auxiliary socket APIs are also provided. Signed-off-by: Upinder Malhi <umalhi@cisco.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-14IB/usnic: Add UDP support to usnic_fwd.[hc]Upinder Malhi2-0/+75
Add *ip field* to *struct usnic_fwd_dev* as well as new *functions* to manipulate the *ip field.* Furthermore, add new functions for programming UDP flows in the forwarding device. Signed-off-by: Upinder Malhi <umalhi@cisco.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-14IB/usnic: Update ABI and Version file for UDP supportUpinder Malhi2-4/+12
Expand the kernel/userspace interface so userspace may push down a socket file descriptor to usNIC. Also, bump up the abi and version numbers. Signed-off-by: Upinder Malhi <umalhi@cisco.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-14IB/usnic: Port over sysfs to new usnic_fwd.hUpinder Malhi1-7/+3
This patch ports usnic_ib_sysfs.c to the new interface of usnic_fwd.h. Signed-off-by: Upinder Malhi <umalhi@cisco.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-14IB/usnic: Port over usnic_ib_qp_grp.[hc] to new usnic_fwd.hUpinder Malhi2-122/+249
This patch ports usnic_ib_qp_grp.[hc] to the new interface of usnic_fwd.h. Signed-off-by: Upinder Malhi <umalhi@cisco.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-14IB/usnic: Port over main.c and verbs.c to the usnic_fwd.hUpinder Malhi3-39/+39
This patch ports usnic_ib_main.c, usnic_ib_verbs.c and usnic_ib.h to the new interface of usnic_fwd.h. Signed-off-by: Upinder Malhi <umalhi@cisco.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-14IB/usnic: Push all forwarding state to usnic_fwd.[hc]Upinder Malhi2-125/+212
Push all of the usnic device forwarding state - such as mtu, mac - to usnic_fwd_dev. Furthermore, usnic_fwd.h exposes a improved interface for rest of the usnic code. The primary improvement is that usnic_fwd.h's flow management interface takes in high-level *filter* and *action* structures now, instead of low-level paramaters such as vnic_idx, rq_idx. Signed-off-by: Upinder Malhi <umalhi@cisco.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-14IB/usnic: Add struct usnic_transport_specUpinder Malhi1-0/+9
Add *struct usnic_transport_spec* for passing around transport specifications. Signed-off-by: Upinder Malhi <umalhi@cisco.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-06 17:26:58 +0300