summaryrefslogtreecommitdiff
path: root/drivers/infiniband/hw/mlx5/main.c
AgeCommit message (Collapse)AuthorFilesLines
2018-02-13IB/mlx5: Assign send CQ and recv CQ of UMR QPMajd Dibbiny1-0/+2
commit 31fde034a8bd964a5c7c1a5663fc87a913158db2 upstream. The UMR's QP is created by calling mlx5_ib_create_qp directly, and therefore the send CQ and the recv CQ on the ibqp weren't assigned. Assign them right after calling the mlx5_ib_create_qp to assure that any access to those pointers will work as expected and won't crash the system as might happen as part of reset flow. Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters") Signed-off-by: Majd Dibbiny <majd@mellanox.com> Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2017-07-18net/mlx5: Increase number of max QPs in default profileMaor Gottlieb1-1/+1
commit 5f40b4ed975c26016cf41953b7510fe90718e21c upstream. With ConnectX-4 sharing SRQs from the same space as QPs, we hit a limit preventing some applications to allocate needed QPs amount. Double the size to 256K. Fixes: e126ba97dba9e ('mlx5: Add driver for Mellanox Connect-IB adapters') Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> [bwh: Backported to 3.16: adjust filename] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2017-03-16IB/mlx5: Put non zero value in max_ahMaor Gottlieb1-0/+1
commit 86695a6582e3b1c4895de2bde4e1022b3a8fbda0 upstream. We put INT_MAX since this is the max value that can be held. Though there is no hardware limitation, this is practically a large enough number so we can use it. Fixes: e126ba97dba9 ('mlx5: Add driver for Mellanox Connect-IB adapters') Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com> [bwh: Backported to 3.16: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2016-08-23IB/mlx5: Return PORT_ERR in Active to Initializing tranisitionNoa Osherovich1-4/+1
commit 2788cf3bd90af3791c3195c52391bcf34fa67b40 upstream. FW port-change events are fired on Active <-> non Active port state transitions only. When the port state changes from Active to Initializing (Active -> Down -> Initializing), a single event is fired. The HCA transitions from Down to Initializing unless prevented from doing so, hence the driver should also propagate events when the port state is Initializing to consumers so they'll be aware that the port is no longer Active and act accordingly. Fixes: e126ba97dba9e ('mlx5: Add driver for Mellanox Connect-IB...') Signed-off-by: Noa Osherovich <noaos@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com> [bwh: Backported to 3.16: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
2014-04-11IB/mlx5: Add block multicast loopback supportEli Cohen1-0/+2
Add support for the block multicast loopback QP creation flag along the proper firmware API for that. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-04-04Merge tag 'rdma-for-linus' of ↵Linus Torvalds1-0/+12
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband Pull infiniband updates from Roland Dreier: "Main batch of InfiniBand/RDMA changes for 3.15: - The biggest change is core API extensions and mlx5 low-level driver support for handling DIF/DIX-style protection information, and the addition of PI support to the iSER initiator. Target support will be arriving shortly through the SCSI target tree. - A nice simplification to the "umem" memory pinning library now that we have chained sg lists. Kudos to Yishai Hadas for realizing our code didn't have to be so crazy. - Another nice simplification to the sg wrappers used by qib, ipath and ehca to handle their mapping of memory to adapter. - The usual batch of fixes to bugs found by static checkers etc. from intrepid people like Dan Carpenter and Yann Droneaud. - A large batch of cxgb4, ocrdma, qib driver updates" * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (102 commits) RDMA/ocrdma: Unregister inet notifier when unloading ocrdma RDMA/ocrdma: Fix warnings about pointer <-> integer casts RDMA/ocrdma: Code clean-up RDMA/ocrdma: Display FW version RDMA/ocrdma: Query controller information RDMA/ocrdma: Support non-embedded mailbox commands RDMA/ocrdma: Handle CQ overrun error RDMA/ocrdma: Display proper value for max_mw RDMA/ocrdma: Use non-zero tag in SRQ posting RDMA/ocrdma: Memory leak fix in ocrdma_dereg_mr() RDMA/ocrdma: Increment abi version count RDMA/ocrdma: Update version string be2net: Add abi version between be2net and ocrdma RDMA/ocrdma: ABI versioning between ocrdma and be2net RDMA/ocrdma: Allow DPP QP creation RDMA/ocrdma: Read ASIC_ID register to select asic_gen RDMA/ocrdma: SQ and RQ doorbell offset clean up RDMA/ocrdma: EQ full catastrophe avoidance RDMA/cxgb4: Disable DSGL use by default RDMA/cxgb4: rx_data() needs to hold the ep mutex ...
2014-03-07IB/mlx5: Expose support for signature MR featureSagi Grimberg1-0/+9
Currently support only T10-DIF types of signature handover operations (types 1|2|3). Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-03-07IB/mlx5: Collect signature error completionSagi Grimberg1-0/+1
This commit takes care of the generated signature error CQE generated by the HW (if happened). The underlying mlx5 driver will handle signature error completions and will mark the relevant memory region as dirty. Once the consumer gets the completion for the transaction, it must check for signature errors on signature memory region using a new lightweight verb ib_check_mr_status(). In case the user doesn't check for signature error (i.e. doesn't call ib_check_mr_status() with status check IB_MR_CHECK_SIG_STATUS), the memory region cannot be used for another signature operation (REG_SIG_MR work request will fail). Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-03-07mlx5: Implement create_mr and destroy_mrSagi Grimberg1-0/+2
Support create_mr and destroy_mr verbs. Creating ib_mr may be done for either ib_mr that will register regular page lists like alloc_fast_reg_mr routine, or indirect ib_mrs that can register other (pre-registered) ib_mrs in an indirect manner. In addition user may request signature enable, that will mean that the created ib_mr may be attached with signature attributes (BSF, PSVs). Currently we only allow direct/indirect registration modes. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-02-26net,IB/mlx: Bump all Mellanox driver versionsAmir Vadai1-2/+2
Bump all Mellanox driver versions. Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-07IB/mlx5: Don't set "block multicast loopback" capabilityEli Cohen1-2/+1
Currently Connect-IB does not support blocking multicast loopback, so don't set IB_DEVICE_BLOCK_MULTICAST_LOOPBACK in the device caps. Reported by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-02-07IB/mlx5: Fix binary compatibility with libmlx5Eli Cohen1-2/+17
Commit c1be5232d21d ("Fix micro UAR allocator") broke binary compatibility between libmlx5 and mlx5_ib since it defines a different value to the number of micro UARs per page, leading to wrong calculation in libmlx5. This patch defines struct mlx5_ib_alloc_ucontext_req_v2 as an extension to struct mlx5_ib_alloc_ucontext_req. The extended size is determined in mlx5_ib_alloc_ucontext() and in case of old library we use uuarn 0 which works fine -- this is acheived due to create_user_qp() falling back from high to medium then to low class where low class will return 0. For new libraries we use the more sophisticated allocation algorithm. Signed-off-by: Eli Cohen <eli@mellanox.com> Reviewed-by: Yann Droneaud <ydroneaud@opteya.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-15IB/mlx5: Fix micro UAR allocatorEli Cohen1-5/+8
The micro UAR (uuar) allocator had a bug which resulted from the fact that in each UAR we only have two micro UARs avaialable, those at index 0 and 1. This patch defines iterators to aid in traversing the list of available micro UARs when allocating a uuar. In addition, change the logic in create_user_qp() so that if high class allocation fails (high class means lower latency), we revert to medium class and not to the low class. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-11-09IB/mlx5: Multithreaded create MREli Cohen1-1/+2
Use asynchronous commands to execute up to eight concurrent create MR commands. This is to fill memory caches faster so we keep consuming from there. Also, increase timeout for shrinking caches to five minutes. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-10-10IB/mlx5: Fix eq names to display nicely in /proc/interruptsSagi Grimberg1-3/+3
It's helpful for a driver to put the pci slot name in its interrupt names, so /proc/interrupts will show the pci slot of the device. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-10-10IB/mlx5: Disable atomic operationsEli Cohen1-3/+2
Currently Atomic operations don't work properly. Disable them for the time being. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-10-10IB/mlx5: Avoid async events on invalid port numberEli Cohen1-0/+5
On a single ported Connect-IB, its possible for the firmware to issue events on the non-existing 2nd port. Make sure to ignore events generated for such ports. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-08-01IB/mlx5: Fix stack info leak in mlx5_ib_alloc_ucontext()Dan Carpenter1-1/+2
We don't set "resp.reserved". Since it's at the end of the struct that means we don't have to copy it to the user. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-08-01IB/mlx5: Fix error return code in init_one()Wei Yongjun1-3/+5
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-07-08IB/mlx5: Make profile[] static in main.cRoland Dreier1-1/+1
Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-07-08mlx5: Add driver for Mellanox Connect-IB adaptersEli Cohen1-0/+1504
The driver is comprised of two kernel modules: mlx5_ib and mlx5_core. This partitioning resembles what we have for mlx4, except that mlx5_ib is the pci device driver and not mlx5_core. mlx5_core is essentially a library that provides general functionality that is intended to be used by other Mellanox devices that will be introduced in the future. mlx5_ib has a similar role as any hardware device under drivers/infiniband/hw. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> [ Merge in coccinelle fixes from Fengguang Wu <fengguang.wu@intel.com>. - Roland ] Signed-off-by: Roland Dreier <roland@purestorage.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-03-13 06:22:15 +0300