summaryrefslogtreecommitdiff
path: root/drivers/infiniband/hw/mlx4
AgeCommit message (Collapse)AuthorFilesLines
2019-04-20IB/mlx4: Fix race condition between catas error reset and aliasguid flowsJack Morgenstein1-1/+1
[ Upstream commit 587443e7773e150ae29e643ee8f41a1eed226565 ] Code review revealed a race condition which could allow the catas error flow to interrupt the alias guid query post mechanism at random points. Thiis is fixed by doing cancel_delayed_work_sync() instead of cancel_delayed_work() during the alias guid mechanism destroy flow. Fixes: a0c64a17aba8 ("mlx4: Add alias_guid mechanism") Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-04-05IB/mlx4: Increase the timeout for CM cacheHåkon Bugge1-1/+1
[ Upstream commit 2612d723aadcf8281f9bf8305657129bd9f3cd57 ] Using CX-3 virtual functions, either from a bare-metal machine or pass-through from a VM, MAD packets are proxied through the PF driver. Since the VF drivers have separate name spaces for MAD Transaction Ids (TIDs), the PF driver has to re-map the TIDs and keep the book keeping in a cache. Following the RDMA Connection Manager (CM) protocol, it is clear when an entry has to evicted form the cache. But life is not perfect, remote peers may die or be rebooted. Hence, it's a timeout to wipe out a cache entry, when the PF driver assumes the remote peer has gone. During workloads where a high number of QPs are destroyed concurrently, excessive amount of CM DREQ retries has been observed The problem can be demonstrated in a bare-metal environment, where two nodes have instantiated 8 VFs each. This using dual ported HCAs, so we have 16 vPorts per physical server. 64 processes are associated with each vPort and creates and destroys one QP for each of the remote 64 processes. That is, 1024 QPs per vPort, all in all 16K QPs. The QPs are created/destroyed using the CM. When tearing down these 16K QPs, excessive CM DREQ retries (and duplicates) are observed. With some cat/paste/awk wizardry on the infiniband_cm sysfs, we observe as sum of the 16 vPorts on one of the nodes: cm_rx_duplicates: dreq 2102 cm_rx_msgs: drep 1989 dreq 6195 rep 3968 req 4224 rtu 4224 cm_tx_msgs: drep 4093 dreq 27568 rep 4224 req 3968 rtu 3968 cm_tx_retries: dreq 23469 Note that the active/passive side is equally distributed between the two nodes. Enabling pr_debug in cm.c gives tons of: [171778.814239] <mlx4_ib> mlx4_ib_multiplex_cm_handler: id{slave: 1,sl_cm_id: 0xd393089f} is NULL! By increasing the CM_CLEANUP_CACHE_TIMEOUT from 5 to 30 seconds, the tear-down phase of the application is reduced from approximately 90 to 50 seconds. Retries/duplicates are also significantly reduced: cm_rx_duplicates: dreq 2460 [] cm_tx_retries: dreq 3010 req 47 Increasing the timeout further didn't help, as these duplicates and retries stems from a too short CMA timeout, which was 20 (~4 seconds) on the systems. By increasing the CMA timeout to 22 (~17 seconds), the numbers fell down to about 10 for both of them. Adjustment of the CMA timeout is not part of this commit. Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com> Acked-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-01-22IB/mlx4: Fix using wrong function to destroy sqp AHs under SRIOVJack Morgenstein1-3/+3
The commit cited below replaced rdma_create_ah with mlx4_ib_create_slave_ah when creating AHs for the paravirtualized special QPs. However, this change also required replacing rdma_destroy_ah with mlx4_ib_destroy_ah in the affected flows. The commit missed 3 places where rdma_destroy_ah should have been replaced with mlx4_ib_destroy_ah. As a result, the pd usecount was decremented when the ah was destroyed -- although the usecount was NOT incremented when the ah was created. This caused the pd usecount to become negative, and resulted in the WARN_ON stack trace below when the mlx4_ib.ko module was unloaded: WARNING: CPU: 3 PID: 25303 at drivers/infiniband/core/verbs.c:329 ib_dealloc_pd+0x6d/0x80 [ib_core] Modules linked in: rdma_ucm rdma_cm iw_cm ib_cm ib_umad mlx4_ib(-) ib_uverbs ib_core mlx4_en mlx4_core nfsv3 nfs fscache configfs xt_conntrack nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 libcrc32c ipt_REJECT nf_reject_ipv4 tun ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter bridge stp llc dm_mirror dm_region_hash dm_log dm_mod dax rndis_wlan rndis_host coretemp kvm_intel cdc_ether kvm usbnet iTCO_wdt iTCO_vendor_support cfg80211 irqbypass lpc_ich ipmi_si i2c_i801 mii pcspkr i2c_core mfd_core ipmi_devintf i7core_edac ipmi_msghandler ioatdma pcc_cpufreq dca acpi_cpufreq nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables ext4 mbcache jbd2 sr_mod cdrom ata_generic pata_acpi mptsas scsi_transport_sas mptscsih crc32c_intel ata_piix bnx2 mptbase ipv6 crc_ccitt autofs4 [last unloaded: mlx4_core] CPU: 3 PID: 25303 Comm: modprobe Tainted: G W I 5.0.0-rc1-net-mlx4+ #1 Hardware name: IBM -[7148ZV6]-/Node 1, System Card, BIOS -[MLE170CUS-1.70]- 09/23/2011 RIP: 0010:ib_dealloc_pd+0x6d/0x80 [ib_core] Code: 00 00 85 c0 75 02 5b c3 80 3d aa 87 03 00 00 75 f5 48 c7 c7 88 d7 8f a0 31 c0 c6 05 98 87 03 00 01 e8 07 4c 79 e0 0f 0b 5b c3 <0f> 0b eb be 0f 0b eb ab 90 66 2e 0f 1f 84 00 00 00 00 00 66 66 66 RSP: 0018:ffffc90005347e30 EFLAGS: 00010282 RAX: 00000000ffffffea RBX: ffff8888589e9540 RCX: 0000000000000006 RDX: 0000000000000006 RSI: ffff88885d57ad40 RDI: 0000000000000000 RBP: ffff88885b029c00 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000004 R12: ffff8887f06c0000 R13: ffff8887f06c13e8 R14: 0000000000000000 R15: 0000000000000000 FS: 00007fd6743c6740(0000) GS:ffff88887fcc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000ed1038 CR3: 00000007e3156000 CR4: 00000000000006e0 Call Trace: mlx4_ib_close_sriov+0x125/0x180 [mlx4_ib] mlx4_ib_remove+0x57/0x1f0 [mlx4_ib] mlx4_remove_device+0x92/0xa0 [mlx4_core] mlx4_unregister_interface+0x39/0x90 [mlx4_core] mlx4_ib_cleanup+0xc/0xd7 [mlx4_ib] __x64_sys_delete_module+0x17d/0x290 ? trace_hardirqs_off_thunk+0x1a/0x1c ? do_syscall_64+0x12/0x180 do_syscall_64+0x4a/0x180 entry_SYSCALL_64_after_hwframe+0x49/0xbe Fixes: 5e62d5ff1b9a ("IB/mlx4: Create slave AH's directly") Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-12-29Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds8-129/+170
Pull rdma updates from Jason Gunthorpe: "This has been a fairly typical cycle, with the usual sorts of driver updates. Several series continue to come through which improve and modernize various parts of the core code, and we finally are starting to get the uAPI command interface cleaned up. - Various driver fixes for bnxt_re, cxgb3/4, hfi1, hns, i40iw, mlx4, mlx5, qib, rxe, usnic - Rework the entire syscall flow for uverbs to be able to run over ioctl(). Finally getting past the historic bad choice to use write() for command execution - More functional coverage with the mlx5 'devx' user API - Start of the HFI1 series for 'TID RDMA' - SRQ support in the hns driver - Support for new IBTA defined 2x lane widths - A big series to consolidate all the driver function pointers into a big struct and have drivers provide a 'static const' version of the struct instead of open coding initialization - New 'advise_mr' uAPI to control device caching/loading of page tables - Support for inline data in SRPT - Modernize how umad uses the driver core and creates cdev's and sysfs files - First steps toward removing 'uobject' from the view of the drivers" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (193 commits) RDMA/srpt: Use kmem_cache_free() instead of kfree() RDMA/mlx5: Signedness bug in UVERBS_HANDLER() IB/uverbs: Signedness bug in UVERBS_HANDLER() IB/mlx5: Allocate the per-port Q counter shared when DEVX is supported IB/umad: Start using dev_groups of class IB/umad: Use class_groups and let core create class file IB/umad: Refactor code to use cdev_device_add() IB/umad: Avoid destroying device while it is accessed IB/umad: Simplify and avoid dynamic allocation of class IB/mlx5: Fix wrong error unwind IB/mlx4: Remove set but not used variable 'pd' RDMA/iwcm: Don't copy past the end of dev_name() string IB/mlx5: Fix long EEH recover time with NVMe offloads IB/mlx5: Simplify netdev unbinding IB/core: Move query port to ioctl RDMA/nldev: Expose port_cap_flags2 IB/core: uverbs copy to struct or zero helper IB/rxe: Reuse code which sets port state IB/rxe: Make counters thread safe IB/mlx5: Use the correct commands for UMEM and UCTX allocation ...
2018-12-21IB/mlx4: Remove set but not used variable 'pd'YueHaibing1-3/+0
Fixes gcc '-Wunused-but-set-variable' warning: drivers/infiniband/hw/mlx4/qp.c: In function '_mlx4_ib_destroy_qp': drivers/infiniband/hw/mlx4/qp.c:1612:22: warning: variable 'pd' set but not used [-Wunused-but-set-variable] Fixes: e00b64f7c54c ("RDMA: Cleanup undesired pd->uobject usage") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-12-20RDMA: Mark if destroy address handle is in a sleepable contextGal Pressman3-14/+14
Introduce a 'flags' field to destroy address handle callback and add a flag that marks whether the callback is executed in an atomic context or not. This will allow drivers to wait for completion instead of polling for it when it is allowed. Signed-off-by: Gal Pressman <galpress@amazon.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-12-20RDMA: Mark if create address handle is in a sleepable contextGal Pressman3-5/+5
Introduce a 'flags' field to create address handle callback and add a flag that marks whether the callback is executed in an atomic context or not. This will allow drivers to wait for completion instead of polling for it when it is allowed. Signed-off-by: Gal Pressman <galpress@amazon.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-12-19RDMA: Cleanup undesired pd->uobject usageShamir Rabinovitch2-15/+15
Drivers should be using udata to determine if a method is invoked from user space or kernel space. A pd does not necessarily say a different objects is kernel or user. Transforming the tests to use udata eliminates a large number of uobject references from the drivers. Signed-off-by: Shamir Rabinovitch <shamir.rabinovitch@oracle.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-12-19IB/mlx4: Utilize macro to calculate SQ spare sizeYuval Shaia1-1/+1
The macro MLX4_IB_SQ_HEADROOM calculates the spare room needed to be left. Use it instead of hard-coding the HW prefetch size. Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-12-12RDMA: Start use ib_device_opsKamal Heib1-1/+1
Make all the required change to start use the ib_device_ops structure. Signed-off-by: Kamal Heib <kamalheib1@gmail.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-12-12RDMA/mlx4: Initialize ib_device_ops structKamal Heib1-79/+99
Initialize ib_device_ops with the supported operations using ib_set_device_ops(). Signed-off-by: Kamal Heib <kamalheib1@gmail.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-12-12IB/mlx4: Remove unneeded NULL checkYuval Shaia1-3/+3
NULL check for kfree is unnecessary, remove it. Fixes: b42dde478bca ("IB/mlx4: Rework special QP creation error path") Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-12-07mlx4: Use snprintf instead of complicated strcpyQian Cai1-8/+4
This fixes a compilation warning in sysfs.c drivers/infiniband/hw/mlx4/sysfs.c:360:2: warning: 'strncpy' output may be truncated copying 8 bytes from a string of length 31 [-Wstringop-truncation] By eliminating the temporary stack buffer. Signed-off-by: Qian Cai <cai@gmx.us> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-11-22{net, IB}/mlx4: Initialize CQ buffers in the driver when possibleDaniel Jurgens1-1/+8
Perform CQ initialization in the driver when the capability is supported by the FW. When passing the CQ to HW indicate that the CQ buffer has been pre-initialized. Doing so decreases CQ creation time. Testing on P8 showed a single 2048 entry CQ creation time was reduced from ~395us to ~170us, which is 2.3x faster. Signed-off-by: Daniel Jurgens <danielj@mellanox.com> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-22mlx4: trigger IB events needed by SMCUrsula Braun2-0/+28
The mlx4 driver does not trigger an IB_EVENT_PORT_ACTIVE when the RoCE network interface is activated. When SMC determines the RoCE device port to be used, it checks the port states. This patch triggers IB events for NETDEV_UP and NETDEV_DOWN. Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Acked-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-10-17RDMA/drivers: Use core provided API for registering device attributesParav Pandit1-19/+18
Use rdma_set_device_sysfs_group() to register device attributes and simplify the driver. Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-10-16IB/mlx4: Add port and TID to MAD debug printHåkon Bugge1-8/+10
Add said information and make the debug print format consistent. Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com> Acked-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-10-16IB/mlx4: Enable debug print of SMPsHåkon Bugge1-1/+1
IB Subnet Management Packets (SMPs) were excluded from debug prints. Fixed by enabling print even on QP0 MADs. Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-10-16IB/mlx4: Refer to the device kobject instead of ports_parentParav Pandit1-5/+1
iov sysfs tree is created under ib device at /sys/class/infiniband/mlx4_0/iov. And, ibdev->ports_parent->parent = &ibdev->dev. Therefore, refer to device's kobject directly instead of indirect access to it. Additionally, iov entries are created under device kobject and deleted before device is removed. There is no need to hold additional reference to device kobject in provider driver. Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-10-16Merge branch 'for-rc' into rdma.git for-nextJason Gunthorpe1-3/+5
From git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma.git This is required to resolve dependencies of the next series of RDMA patches. The code motion conflicts in drivers/infiniband/core/cache.c were resolved. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-10-04RDMA: Remove unused parameter from ib_modify_qp_is_ok()Kamal Heib1-7/+1
The ll parameter is not used in ib_modify_qp_is_ok(), so remove it. Signed-off-by: Kamal Heib <kamalheib1@gmail.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-09-26RDMA: Fully setup the device name in ib_register_deviceJason Gunthorpe1-2/+1
The current code has two copies of the device name, ibdev->dev and dev_name(&ibdev->dev), and they are setup at different times, which is very confusing. Set them both up at the same time and make dev_name() the lead name, which is the proper use of the driver core APIs. To make it very clear that the name is not valid until registration pass it in to the ib_register_device() call rather than messing with ibdev->name directly. Also the reorganization now checks that dev_name is unique even if it does not contain a %. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Acked-by: Adit Ranadive <aditr@vmware.com> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Acked-by: Devesh Sharma <devesh.sharma@broadcom.com> Reviewed-by: Shiraz Saleem <shiraz.saleem@intel.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
2018-09-26RDMA: Fix dependencies for rdma_user_mmap_ioArnd Bergmann1-0/+1
The mlx4 driver produces a link error when it is configured as built-in while CONFIG_INFINIBAND_USER_ACCESS is set to =m: drivers/infiniband/hw/mlx4/main.o: In function `mlx4_ib_mmap': main.c:(.text+0x1af4): undefined reference to `rdma_user_mmap_io' The same function is called from mlx5, which already has a dependency to ensure we can call it, and from hns, which appears to suffer from the same problem. This adds the same dependency that mlx5 uses to the other two. Fixes: 6745d356ab39 ("RDMA/hns: Use rdma_user_mmap_io") Fixes: c282da4109e4 ("RDMA/mlx4: Use rdma_user_mmap_io") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-09-21IB/mlx4: Remove unnecessary parenthesesNathan Chancellor1-1/+1
Clang warns when more than one set of parentheses are used in single conditional statements. drivers/infiniband/hw/mlx4/mcg.c:676:16: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] if ((method == IB_MGMT_METHOD_GET_RESP)) { ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/infiniband/hw/mlx4/mcg.c:676:16: note: remove extraneous parentheses around the comparison to silence this warning if ((method == IB_MGMT_METHOD_GET_RESP)) { ~ ^ ~ drivers/infiniband/hw/mlx4/mcg.c:676:16: note: use '=' to turn this equality comparison into an assignment if ((method == IB_MGMT_METHOD_GET_RESP)) { ^~ = Remove the unnecessary parentheses to silence this warning. Reported-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-09-20RDMA/mlx4: Use rdma_user_mmap_ioJason Gunthorpe2-123/+24
Rely on the new core code helper to map BAR memory from the driver. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-09-06RDMA/mlx4: Ensure that maximal send/receive SGE less than supported by HWLeon Romanovsky1-3/+5
In calculating the global maximum number of the Scatter/Gather elements supported, the following four maximum parameters must be taken into consideration: max_sg_rq, max_sg_sq, max_desc_sz_rq and max_desc_sz_sq. However instead of bringing this complexity to query_device, which still won't be sufficient anyway (the calculations are dependent on QP type), the safer approach will be to restore old code, which will give us 32 SGEs. Fixes: 33023fb85a42 ("IB/core: add max_send_sge and max_recv_sge attributes") Reported-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-08-16Merge tag 'v4.18' into rdma.git for-nextJason Gunthorpe1-2/+5
Resolve merge conflicts from the -rc cycle against the rdma.git tree: Conflicts: drivers/infiniband/core/uverbs_cmd.c - New ifs added to ib_uverbs_ex_create_flow in -rc and for-next - Merge removal of file->ucontext in for-next with new code in -rc drivers/infiniband/core/uverbs_main.c - for-next removed code from ib_uverbs_write() that was modified in for-rc Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-07-31IB/mlx4: Use 4K pages for kernel QP's WQE bufferJack Morgenstein2-176/+34
In the current implementation, the driver tries to allocate contiguous memory, and if it fails, it falls back to 4K fragmented allocation. Once the memory is fragmented, the first allocation might take a lot of time, and even fail, which can cause connection failures. This patch changes the logic to always allocate with 4K granularity, since it's more robust and more likely to succeed. This patch was tested with Lustre and no performance degradation was observed. Note: This commit eliminates the "shrinking WQE" feature. This feature depended on using vmap to create a virtually contiguous send WQ. vmap use was abandoned due to problems with several processors (see the commit cited below). As a result, shrinking WQE was available only with physically contiguous send WQs. Allocating such send WQs caused the problems described above. Therefore, as a side effect of eliminating the use of large physically contiguous send WQs, the shrinking WQE feature became unavailable. Warning example: worker/20:1: page allocation failure: order:8, mode:0x80d0 CPU: 20 PID: 513 Comm: kworker/20:1 Tainted: G OE ------------ Workqueue: ib_cm cm_work_handler [ib_cm] Call Trace: [<ffffffff81686d81>] dump_stack+0x19/0x1b [<ffffffff81186160>] warn_alloc_failed+0x110/0x180 [<ffffffff8118a954>] __alloc_pages_nodemask+0x9b4/0xba0 [<ffffffff811ce868>] alloc_pages_current+0x98/0x110 [<ffffffff81184fae>] __get_free_pages+0xe/0x50 [<ffffffff8133f6fe>] swiotlb_alloc_coherent+0x5e/0x150 [<ffffffff81062551>] x86_swiotlb_alloc_coherent+0x41/0x50 [<ffffffffa056b4c4>] mlx4_buf_direct_alloc.isra.7+0xc4/0x180 [mlx4_core] [<ffffffffa056b73b>] mlx4_buf_alloc+0x1bb/0x260 [mlx4_core] [<ffffffffa0b15496>] create_qp_common+0x536/0x1000 [mlx4_ib] [<ffffffff811c6ef7>] ? dma_pool_free+0xa7/0xd0 [<ffffffffa0b163c1>] mlx4_ib_create_qp+0x3b1/0xdc0 [mlx4_ib] [<ffffffffa0b01bc2>] ? mlx4_ib_create_cq+0x2d2/0x430 [mlx4_ib] [<ffffffffa0b21f20>] mlx4_ib_create_qp_wrp+0x10/0x20 [mlx4_ib] [<ffffffffa08f152a>] ib_create_qp+0x7a/0x2f0 [ib_core] [<ffffffffa06205d4>] rdma_create_qp+0x34/0xb0 [rdma_cm] [<ffffffffa08275c9>] kiblnd_create_conn+0xbf9/0x1950 [ko2iblnd] [<ffffffffa074077a>] ? cfs_percpt_unlock+0x1a/0xb0 [libcfs] [<ffffffffa0835519>] kiblnd_passive_connect+0xa99/0x18c0 [ko2iblnd] Fixes: 73898db04301 ("net/mlx4: Avoid wrong virtual mappings") Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-07-31RDMA, core and ULPs: Declare ib_post_send() and ib_post_recv() arguments constBart Van Assche4-21/+23
Since neither ib_post_send() nor ib_post_recv() modify the data structure their second argument points at, declare that argument const. This change makes it necessary to declare the 'bad_wr' argument const too and also to modify all ULPs that call ib_post_send(), ib_post_recv() or ib_post_srq_recv(). This patch does not change any functionality but makes it possible for the compiler to verify whether the ib_post_(send|recv|srq_recv) really do not modify the posted work request. To make this possible, only one cast had to be introduce that casts away constness, namely in rpcrdma_post_recvs(). The only way I can think of to avoid that cast is to introduce an additional loop in that function or to change the data type of bad_wr from struct ib_recv_wr ** into int (an index that refers to an element in the work request list). However, both approaches would require even more extensive changes than this patch. Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-07-31RDMA: Constify the argument of the work request conversion functionsBart Van Assche1-12/+13
When posting a send work request, the work request that is posted is not modified by any of the RDMA drivers. Make this explicit by constifying most ib_send_wr pointers in RDMA transport drivers. Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-07-10RDMA: Fix storage of PortInfo CapabilityMask in the kernelJason Gunthorpe1-1/+2
The internal flag IP_BASED_GIDS was added to a field that was being used to hold the port Info CapabilityMask without considering the effects this will have. Since most drivers just use the value from the HW MAD it means IP_BASED_GIDS will also become set on any HW that sets the IBA flag IsOtherLocalChangesNoticeSupported - which is not intended. Fix this by keeping port_cap_flags only for the IBA CapabilityMask value and store unrelated flags externally. Move the bit definitions for this to ib_mad.h to make it clear what is happening. To keep the uAPI unchanged define a new set of flags in the uapi header that are only used by ib_uverbs_query_port_resp.port_cap_flags which match the current flags supported in rdma-core, and the values exposed by the current kernel. Fixes: b4a26a27287a ("IB: Report using RoCE IP based gids in port caps") Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2018-07-04IB/mlx4: Test port number before querying type.Tarick Bedeir1-1/+1
rdma_ah_find_type() can reach into ib_device->port_immutable with a potentially out-of-bounds port number, so check that the port number is valid first. Fixes: 44c58487d51a ("IB/core: Define 'ib' and 'roce' rdma_ah_attr types") Signed-off-by: Tarick Bedeir <tarick@google.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-06-26IB/mlx4: Create slave AH's directlyJason Gunthorpe3-25/+59
Since slave GID's do not exist in the core gid table we can no longer use the core code to help do this without creating inconsistencies. Directly create the AH using mlx4 internal APIs. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Reviewed-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2018-06-25IB/mlx4: Add support for drain SQ & RQYishai Hadas3-6/+152
This patch follows the logic from ib_core but considers the internal device state upon executing the involved commands. Specifically, Upon internal error state modify QP to an error state can be assumed to be success as each in-progress WR going to be flushed in error in any case as expected by that modify command. In addition, As the drain should never fail the driver makes sure that post_send/recv will succeed even if the device is already in an internal error state. As such once the driver will supply the simulated/SW CQEs the CQE for the drain WR will be handled as well. In case of an internal error state the CQE for the drain WR may be completed as part of the main task that handled the error state or by the task that issued the drain WR. As the above depends on scheduling the code takes the relevant locks and actions to make sure that the completion handler for that WR will always be called after that the post_send/recv were issued but not in parallel to the other task that handles the error flow. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-06-21Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds1-2/+5
Pull rdma fixes from Jason Gunthorpe: "Here are eight fairly small fixes collected over the last two weeks. Regression and crashing bug fixes: - mlx4/5: Fixes for issues found from various checkers - A resource tracking and uverbs regression in the core code - qedr: NULL pointer regression found during testing - rxe: Various small bugs" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: IB/rxe: Fix missing completion for mem_reg work requests RDMA/core: Save kernel caller name when creating CQ using ib_create_cq() IB/uverbs: Fix ordering of ucontext check in ib_uverbs_write IB/mlx4: Fix an error handling path in 'mlx4_ib_rereg_user_mr()' RDMA/qedr: Fix NULL pointer dereference when running over iWARP without RDMA-CM IB/mlx5: Fix return value check in flow_counters_set_data() IB/mlx5: Fix memory leak in mlx5_ib_create_flow IB/rxe: avoid double kfree skb
2018-06-18IB/core: add max_send_sge and max_recv_sge attributesSteve Wise1-2/+2
This patch replaces the ib_device_attr.max_sge with max_send_sge and max_recv_sge. It allows ulps to take advantage of devices that have very different send and recv sge depths. For example cxgb4 has a max_recv_sge of 4, yet a max_send_sge of 16. Splitting out these attributes allows much more efficient use of the SQ for cxgb4 with ulps that use the RDMA_RW API. Consider a large RDMA WRITE that has 16 scattergather entries. With max_sge of 4, the ulp would send 4 WRITE WRs, but with max_sge of 16, it can be done with 1 WRITE WR. Acked-by: Sagi Grimberg <sagi@grimberg.me> Acked-by: Christoph Hellwig <hch@lst.de> Acked-by: Selvin Xavier <selvin.xavier@broadcom.com> Acked-by: Shiraz Saleem <shiraz.saleem@intel.com> Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-06-18RDMA: Convert drivers to use the AH's sgid_attr in post_wr pathsParav Pandit1-6/+2
For UD the drivers were doing a sgid_index lookup into the cache to get the attrs, however we can now directly access the same attrs stores in the ib_ah instead and remove the lookup. Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2018-06-18IB/mlx4: Use GID attribute from ah attributeParav Pandit4-20/+9
While converting GID index from attribute to that of the HCA, GID attribute is available from the ah_attr. Make use of GID attribute to simplify the code and also avoid avoid GID query. Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2018-06-18RDMA: Convert drivers to use sgid_attr instead of sgid_indexParav Pandit2-30/+17
The core code now ensures that all driver callbacks that receive an rdma_ah_attrs will have a sgid_attr's pointer if there is a GRH present. Drivers can use this pointer instead of calling a query function with sgid_index. This simplifies the drivers and also avoids races where a gid_index lookup may return different data if it is changed. Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2018-06-18RDMA: Use GID from the ib_gid_attr during the add_gid() callbackParav Pandit1-6/+6
Now that ib_gid_attr contains the GID, make use of that in the add_gid() callback functions for the provider drivers to simplify the add_gid() implementations. Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-06-13treewide: kzalloc() -> kcalloc()Kees Cook1-1/+2
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-13treewide: kmalloc() -> kmalloc_array()Kees Cook2-7/+9
The kmalloc() function has a 2-factor argument form, kmalloc_array(). This patch replaces cases of: kmalloc(a * b, gfp) with: kmalloc_array(a * b, gfp) as well as handling cases of: kmalloc(a * b * c, gfp) with: kmalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kmalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kmalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The tools/ directory was manually excluded, since it has its own implementation of kmalloc(). The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(char) * COUNT + COUNT , ...) | kmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kmalloc + kmalloc_array ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kmalloc(C1 * C2 * C3, ...) | kmalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kmalloc(sizeof(THING) * C2, ...) | kmalloc(sizeof(TYPE) * C2, ...) | kmalloc(C1 * C2 * C3, ...) | kmalloc(C1 * C2, ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - (E1) * E2 + E1, E2 , ...) | - kmalloc + kmalloc_array ( - (E1) * (E2) + E1, E2 , ...) | - kmalloc + kmalloc_array ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-11IB/mlx4: Fix an error handling path in 'mlx4_ib_rereg_user_mr()'Christophe Jaillet1-2/+5
Before returning -EPERM we should release some resources, as already done in the other error handling path of the function. Fixes: d8f9cc328c88 ("IB/mlx4: Mark user MR as writable if actual virtual memory is writable") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-06-04Merge tag 'verbs_flow_counters' of ↵Jason Gunthorpe1-1/+5
git://git.kernel.org/pub/scm/linux/kernel/git/leon/linux-rdma.git into for-next Pull verbs counters series from Leon Romanovsky: ==================== Verbs flow counters support This series comes to allow user space applications to monitor real time traffic activity and events of the verbs objects it manages, e.g.: ibv_qp, ibv_wq, ibv_flow. The API enables generic counters creation and define mapping to association with a verbs object, the current mlx5 driver is using this API for flow counters. With this API, an application can monitor the entire life cycle of object activity, defined here as a static counters attachment. This API also allows dynamic counters monitoring of measurement points for a partial period in the verbs object life cycle. In addition it presents the implementation of the generic counters interface. This will be achieved by extending flow creation by adding a new flow count specification type which allows the user to associate a previously created flow counters using the generic verbs counters interface to the created flow, once associated the user could read statistics by using the read function of the generic counters interface. The API includes: 1. create and destroyed API of a new counters objects 2. read the counters values from HW Note: Attaching API to allow application to define the measurement points per objects is a user space only API and this data is passed to kernel when the counted object (e.g. flow) is created with the counters object. =================== * tag 'verbs_flow_counters': IB/mlx5: Add counters read support IB/mlx5: Add flow counters read support IB/mlx5: Add flow counters binding support IB/mlx5: Add counters create and destroy support IB/uverbs: Add support for flow counters IB/core: Add support for flow counters IB/core: Support passing uhw for create_flow IB/uverbs: Add read counters support IB/core: Introduce counters read verb IB/uverbs: Add create/destroy counters support IB/core: Introduce counters object and its create/destroy IB/uverbs: Add an ib_uobject getter to ioctl() infrastructure net/mlx5: Export flow counter related API net/mlx5: Use flow counter pointer as input to the query function
2018-06-02IB/core: Support passing uhw for create_flowMatan Barak1-1/+5
This is required when user-space drivers need to pass extra information regarding how to handle this flow steering specification. Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Boris Pismenny <borisp@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-06-01RDMA/mlx4: Don't crash machine if zap_vma_ptes() failsLeon Romanovsky1-8/+2
The failure reported by zap_vma_ptes() means that wrong VMA pages were supplied, however it is impossible for this type of address. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-06-01RDMA/mlx4: Discard unknown SQP work requestsLeon Romanovsky1-1/+0
There is no need to crash the machine if unknown work request was received in SQP MAD. Cc: <stable@vger.kernel.org> # 3.6 Fixes: 37bfc7c1e83f ("IB/mlx4: SR-IOV multiplex and demultiplex MADs") Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-06-01RDMA/mlx4: Catch FW<->SW misalignment without machine crashLeon Romanovsky1-1/+4
Any steering QP is supposed be above steering_qp_base, see function mlx4_ib_steer_qp_alloc() for it, however in case of misalignment between SW and FW, this qp_base can be wrong. Use WARN() to catch such situation without killing the machine. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-05-31RDMA/uverbs: Hoist the common process of disassociate_ucontext into ib coreWei Hu(Xavier)1-34/+0
This patch hoisted the common process of disassociate_ucontext callback function into ib core code, and these code are common to ervery ib_device driver. Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com> Acked-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-05-28Merge branch 'mr_fix' into ↵Jason Gunthorpe1-8/+42
git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma for-next Update mlx4 to support user MR creation against read-only memory, previously it required the memory to be writable. Based on rdma for-rc due to dependencies. * mr_fix: (2 commits) IB/mlx4: Mark user MR as writable if actual virtual memory is writable IB/core: Make testing MR flags for writability a static inline function
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-04 10:39:12 +0300