summaryrefslogtreecommitdiff
path: root/drivers/infiniband/hw/hfi1
AgeCommit message (Collapse)AuthorFilesLines
2019-01-13IB/hfi1: Incorrect sizing of sge for PIO will OOPsMichael J. Ruhl1-0/+2
commit dbc2970caef74e8ff41923d302aa6fb5a4812d0e upstream. An incorrect sge sizing in the HFI PIO path will cause an OOPs similar to this: BUG: unable to handle kernel NULL pointer dereference at (null) IP: [] hfi1_verbs_send_pio+0x3d8/0x530 [hfi1] PGD 0 Oops: 0000 1 SMP Call Trace: ? hfi1_verbs_send_dma+0xad0/0xad0 [hfi1] hfi1_verbs_send+0xdf/0x250 [hfi1] ? make_rc_ack+0xa80/0xa80 [hfi1] hfi1_do_send+0x192/0x430 [hfi1] hfi1_do_send_from_rvt+0x10/0x20 [hfi1] rvt_post_send+0x369/0x820 [rdmavt] ib_uverbs_post_send+0x317/0x570 [ib_uverbs] ib_uverbs_write+0x26f/0x420 [ib_uverbs] ? security_file_permission+0x21/0xa0 vfs_write+0xbd/0x1e0 ? mntput+0x24/0x40 SyS_write+0x7f/0xe0 system_call_fastpath+0x16/0x1b Fix by adding the missing sizing check to correctly determine the sge length. Fixes: 7724105686e7 ("IB/hfi1: add driver files") Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-21IB/hfi1: Remove race conditions in user_sdma send pathMichael J. Ruhl2-19/+16
commit 28a9a9e83ceae2cee25b9af9ad20d53aaa9ab951 upstream Packet queue state is over used to determine SDMA descriptor availablitity and packet queue request state. cpu 0 ret = user_sdma_send_pkts(req, pcount); cpu 0 if (atomic_read(&pq->n_reqs)) cpu 1 IRQ user_sdma_txreq_cb calls pq_update() (state to _INACTIVE) cpu 0 xchg(&pq->state, SDMA_PKT_Q_ACTIVE); At this point pq->n_reqs == 0 and pq->state is incorrectly SDMA_PKT_Q_ACTIVE. The close path will hang waiting for the state to return to _INACTIVE. This can also change the state from _DEFERRED to _ACTIVE. However, this is a mostly benign race. Remove the racy code path. Use n_reqs to determine if a packet queue is active or not. Cc: <stable@vger.kernel.org> # 4.9.0 Reviewed-by: Mitko Haralanov <mitko.haralanov@intel.com> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-12-01IB/hfi1: Eliminate races in the SDMA send error pathMichael J. Ruhl1-61/+45
commit a0e0cb82804a6a21d9067022c2dfdf80d11da429 upstream. pq_update() can only be called in two places: from the completion function when the complete (npkts) sequence of packets has been submitted and processed, or from setup function if a subset of the packets were submitted (i.e. the error path). Currently both paths can call pq_update() if an error occurrs. This race will cause the n_req value to go negative, hanging file_close(), or cause a crash by freeing the txlist more than once. Several variables are used to determine SDMA send state. Most of these are unnecessary, and have code inspectible races between the setup function and the completion function, in both the send path and the error path. The request 'status' value can be set by the setup or by the completion function. This is code inspectibly racy. Since the status is not needed in the completion code or by the caller it has been removed. The request 'done' value races between usage by the setup and the completion function. The completion function does not need this. When the number of processed packets matches npkts, it is done. The 'has_error' value races between usage of the setup and the completion function. This can cause incorrect error handling and leave the n_req in an incorrect value (i.e. negative). Simplify the code by removing all of the unneeded state checks and variables. Clean up iovs node when it is freed. Eliminate race conditions in the error path: If all packets are submitted, the completion handler will set the completion status correctly (ok or aborted). If all packets are not submitted, the caller must wait until the submitted packets have completed, and then set the completion status. These two change eliminate the race condition in the error path. Reviewed-by: Mitko Haralanov <mitko.haralanov@intel.com> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-04IB/hfi1: Fix SL array bounds checkIra Weiny1-1/+7
commit 0dbfaa9f2813787679e296eb5476e40938ab48c8 upstream. The SL specified by a user needs to be a valid SL. Add a range check to the user specified SL value which protects from running off the end of the SL to SC table. CC: stable@vger.kernel.org Fixes: 7724105686e7 ("IB/hfi1: add driver files") Signed-off-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-04IB/hfi1: Fix context recovery when PBC has an UnsupportedVLMichael J. Ruhl1-2/+7
commit d623500b3c4efd8d4e945ac9003c6b87b469a9ab upstream. If a packet stream uses an UnsupportedVL (virtual lane), the send engine will not send the packet, and it will not indicate that an error has occurred. This will cause the packet stream to block. HFI has 8 virtual lanes available for packet streams. Each lane can be enabled or disabled using the UnsupportedVL mask. If a lane is disabled, adding a packet to the send context must be disallowed. The current mask for determining unsupported VLs defaults to 0 (allow all). This is incorrect. Only the VLs that are defined should be allowed. Determine which VLs are disabled (mtu == 0), and set the appropriate unsupported bit in the mask. The correct mask will allow the send engine to error on the invalid VL, and error recovery will work correctly. Cc: <stable@vger.kernel.org> # 4.9.x+ Fixes: 7724105686e7 ("IB/hfi1: add driver files") Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Lukasz Odzioba <lukasz.odzioba@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-04IB/hfi1: Invalid user input can result in crashMichael J. Ruhl1-1/+1
commit 94694d18cf27a6faad91487a38ce516c2b16e7d9 upstream. If the number of packets in a user sdma request does not match the actual iovectors being sent, sdma_cleanup can be called on an uninitialized request structure, resulting in a crash similar to this: BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 IP: [<ffffffffc0ae8bb7>] __sdma_txclean+0x57/0x1e0 [hfi1] PGD 8000001044f61067 PUD 1052706067 PMD 0 Oops: 0000 [#1] SMP CPU: 30 PID: 69912 Comm: upsm Kdump: loaded Tainted: G OE ------------ 3.10.0-862.el7.x86_64 #1 Hardware name: Intel Corporation S2600KPR/S2600KPR, BIOS SE5C610.86B.01.01.0019.101220160604 10/12/2016 task: ffff8b331c890000 ti: ffff8b2ed1f98000 task.ti: ffff8b2ed1f98000 RIP: 0010:[<ffffffffc0ae8bb7>] [<ffffffffc0ae8bb7>] __sdma_txclean+0x57/0x1e0 [hfi1] RSP: 0018:ffff8b2ed1f9bab0 EFLAGS: 00010286 RAX: 0000000000008b2b RBX: ffff8b2adf6e0000 RCX: 0000000000000000 RDX: 00000000000000a0 RSI: ffff8b2e9eedc540 RDI: ffff8b2adf6e0000 RBP: ffff8b2ed1f9bad8 R08: 0000000000000000 R09: ffffffffc0b04a06 R10: ffff8b331c890190 R11: ffffe6ed00bf1840 R12: ffff8b3315480000 R13: ffff8b33154800f0 R14: 00000000fffffff2 R15: ffff8b2e9eedc540 FS: 00007f035ac47740(0000) GS:ffff8b331e100000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000008 CR3: 0000000c03fe6000 CR4: 00000000001607e0 Call Trace: [<ffffffffc0b0570d>] user_sdma_send_pkts+0xdcd/0x1990 [hfi1] [<ffffffff9fe75fb0>] ? gup_pud_range+0x140/0x290 [<ffffffffc0ad3105>] ? hfi1_mmu_rb_insert+0x155/0x1b0 [hfi1] [<ffffffffc0b0777b>] hfi1_user_sdma_process_request+0xc5b/0x11b0 [hfi1] [<ffffffffc0ac193a>] hfi1_aio_write+0xba/0x110 [hfi1] [<ffffffffa001a2bb>] do_sync_readv_writev+0x7b/0xd0 [<ffffffffa001bede>] do_readv_writev+0xce/0x260 [<ffffffffa022b089>] ? tty_ldisc_deref+0x19/0x20 [<ffffffffa02268c0>] ? n_tty_ioctl+0xe0/0xe0 [<ffffffffa001c105>] vfs_writev+0x35/0x60 [<ffffffffa001c2bf>] SyS_writev+0x7f/0x110 [<ffffffffa051f7d5>] system_call_fastpath+0x1c/0x21 Code: 06 49 c7 47 18 00 00 00 00 0f 87 89 01 00 00 5b 41 5c 41 5d 41 5e 41 5f 5d c3 66 2e 0f 1f 84 00 00 00 00 00 48 8b 4e 10 48 89 fb <48> 8b 51 08 49 89 d4 83 e2 0c 41 81 e4 00 e0 00 00 48 c1 ea 02 RIP [<ffffffffc0ae8bb7>] __sdma_txclean+0x57/0x1e0 [hfi1] RSP <ffff8b2ed1f9bab0> CR2: 0000000000000008 There are two exit points from user_sdma_send_pkts(). One (free_tx) merely frees the slab entry and one (free_txreq) cleans the sdma_txreq prior to freeing the slab entry. The free_txreq variation can only be called after one of the sdma_init*() variations has been called. In the panic case, the slab entry had been allocated but not inited. Fix the issue by exiting through free_tx thus avoiding sdma_clean(). Cc: <stable@vger.kernel.org> # 4.9.x+ Fixes: 7724105686e7 ("IB/hfi1: add driver files") Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Lukasz Odzioba <lukasz.odzioba@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-08-09IB/hfi1: Fix incorrect mixing of ERR_PTR and NULL return valuesMichael J. Ruhl5-9/+9
commit b697d7d8c741f27b728a878fc55852b06d0f6f5e upstream. The __get_txreq() function can return a pointer, ERR_PTR(-EBUSY), or NULL. All of the relevant call sites look for IS_ERR, so the NULL return would lead to a NULL pointer exception. Do not use the ERR_PTR mechanism for this function. Update all call sites to handle the return value correctly. Clean up error paths to reflect return value. Fixes: 45842abbb292 ("staging/rdma/hfi1: move txreq header code") Cc: <stable@vger.kernel.org> # 4.9.x+ Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Kamenee Arumugam <kamenee.arumugam@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-11IB/hfi1: Fix user context tail allocation for DMA_RTAILMike Marciniszyn3-10/+9
commit 1bc0299d976e000ececc6acd76e33b4582646cb7 upstream. The following code fails to allocate a buffer for the tail address that the hardware DMAs into when the user context DMA_RTAIL is set. if (HFI1_CAP_KGET_MASK(rcd->flags, DMA_RTAIL)) { rcd->rcvhdrtail_kvaddr = dma_zalloc_coherent( &dd->pcidev->dev, PAGE_SIZE, &dma_hdrqtail, gfp_flags); if (!rcd->rcvhdrtail_kvaddr) goto bail_free; rcd->rcvhdrqtailaddr_dma = dma_hdrqtail; } So the rcvhdrtail_kvaddr would then be NULL. The mmap logic fails to check for a NULL rcvhdrtail_kvaddr. The fix is to test for both user and kernel DMA_TAIL options during the allocation as well as testing for a NULL rcvhdrtail_kvaddr during the mmap processing. Additionally, all downstream testing of the capmask for DMA_RTAIL have been eliminated in favor of testing rcvhdrtail_kvaddr. Cc: <stable@vger.kernel.org> # 4.9.x Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-03IB/{hfi1, qib}: Add handling of kernel restartAlex Estrin2-0/+14
commit 8d3e71136a080d007620472f50c7b3e63ba0f5cf upstream. A warm restart will fail to unload the driver, leaving link state potentially flapping up to the point the BIOS resets the adapter. Correct the issue by hooking the shutdown pci method, which will bring port down. Cc: <stable@vger.kernel.org> # 4.9.x Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Alex Estrin <alex.estrin@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30IB/hfi1: Use after free race condition in send context error pathMichael J. Ruhl1-0/+4
commit f9e76ca3771bf23d2142a81a88ddd8f31f5c4c03 upstream. A pio send egress error can occur when the PSM library attempts to to send a bad packet. That issue is still being investigated. The pio error interrupt handler then attempts to progress the recovery of the errored pio send context. Code inspection reveals that the handling lacks the necessary locking if that recovery interleaves with a PSM close of the "context" object contains the pio send context. The lack of the locking can cause the recovery to access the already freed pio send context object and incorrectly deduce that the pio send context is actually a kernel pio send context as shown by the NULL deref stack below: [<ffffffff8143d78c>] _dev_info+0x6c/0x90 [<ffffffffc0613230>] sc_restart+0x70/0x1f0 [hfi1] [<ffffffff816ab124>] ? __schedule+0x424/0x9b0 [<ffffffffc06133c5>] sc_halted+0x15/0x20 [hfi1] [<ffffffff810aa3ba>] process_one_work+0x17a/0x440 [<ffffffff810ab086>] worker_thread+0x126/0x3c0 [<ffffffff810aaf60>] ? manage_workers.isra.24+0x2a0/0x2a0 [<ffffffff810b252f>] kthread+0xcf/0xe0 [<ffffffff810b2460>] ? insert_kthread_work+0x40/0x40 [<ffffffff816b8798>] ret_from_fork+0x58/0x90 [<ffffffff810b2460>] ? insert_kthread_work+0x40/0x40 This is the best case scenario and other scenarios can corrupt the already freed memory. Fix by adding the necessary locking in the pio send context error handler. Cc: <stable@vger.kernel.org> # 4.9.x Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-09IB/hfi1: Fix NULL pointer dereference when invalid num_vls is usedSebastian Sanchez2-3/+2
commit 45d924571a5e1329580811f2419da61b07ac3613 upstream. When an invalid num_vls is used as a module parameter, the code execution follows an exception path where the macro dd_dev_err() expects dd->pcidev->dev not to be NULL in hfi1_init_dd(). This causes a NULL pointer dereference. Fix hfi1_init_dd() by initializing dd->pcidev and dd->pcidev->dev earlier in the code. If a dd exists, then dd->pcidev and dd->pcidev->dev always exists. BUG: unable to handle kernel NULL pointer dereference at 00000000000000f0 IP: __dev_printk+0x15/0x90 Workqueue: events work_for_cpu_fn RIP: 0010:__dev_printk+0x15/0x90 Call Trace: dev_err+0x6c/0x90 ? hfi1_init_pportdata+0x38d/0x3f0 [hfi1] hfi1_init_dd+0xdd/0x2530 [hfi1] ? pci_conf1_read+0xb2/0xf0 ? pci_read_config_word.part.9+0x64/0x80 ? pci_conf1_write+0xb0/0xf0 ? pcie_capability_clear_and_set_word+0x57/0x80 init_one+0x141/0x490 [hfi1] local_pci_probe+0x3f/0xa0 work_for_cpu_fn+0x10/0x20 process_one_work+0x152/0x350 worker_thread+0x1cf/0x3e0 kthread+0xf5/0x130 ? max_active_store+0x80/0x80 ? kthread_bind+0x10/0x10 ? do_syscall_64+0x6e/0x1a0 ? SyS_exit_group+0x10/0x10 ret_from_fork+0x35/0x40 Cc: <stable@vger.kernel.org> # 4.9.x Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13RDMA/hfi1: fix array termination by appending NULL to attr arraySteven L. Roberts1-1/+2
[ Upstream commit c4dd4b69f55abcc8dd079f8de55d9d8c2ddbefce ] This fixes a kernel panic when loading the hfi driver as a dynamic module. Signed-off-by: Steven L Roberts <robers97@gmail.com> Reviewed-by: Leon Romanovsky <leon@kernel.org> Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-24IB/hfi1: Fix softlockup issueTadeusz Struk3-38/+57
[ Upstream commit 22546b741af8355cd2e16739b6af4a8f17081839 ] Soft lockups can occur because the mad processing on different CPUs acquire the spin lock dc8051_lock: [534552.835870] [<ffffffffa026f993>] ? read_dev_port_cntr.isra.37+0x23/0x160 [hfi1] [534552.835880] [<ffffffffa02775af>] read_dev_cntr+0x4f/0x60 [hfi1] [534552.835893] [<ffffffffa028d7cd>] pma_get_opa_portstatus+0x64d/0x8c0 [hfi1] [534552.835904] [<ffffffffa0290e7d>] hfi1_process_mad+0x48d/0x18c0 [hfi1] [534552.835908] [<ffffffff811dc1f1>] ? __slab_free+0x81/0x2f0 [534552.835936] [<ffffffffa024c34e>] ? ib_mad_recv_done+0x21e/0xa30 [ib_core] [534552.835939] [<ffffffff811dd153>] ? __kmalloc+0x1f3/0x240 [534552.835947] [<ffffffffa024c3fb>] ib_mad_recv_done+0x2cb/0xa30 [ib_core] [534552.835955] [<ffffffffa0237c85>] __ib_process_cq+0x55/0xd0 [ib_core] [534552.835962] [<ffffffffa0237d70>] ib_cq_poll_work+0x20/0x60 [ib_core] [534552.835964] [<ffffffff810a7f3b>] process_one_work+0x17b/0x470 [534552.835966] [<ffffffff810a8d76>] worker_thread+0x126/0x410 [534552.835969] [<ffffffff810a8c50>] ? rescuer_thread+0x460/0x460 [534552.835971] [<ffffffff810b052f>] kthread+0xcf/0xe0 [534552.835974] [<ffffffff810b0460>] ? kthread_create_on_node+0x140/0x140 [534552.835977] [<ffffffff81696418>] ret_from_fork+0x58/0x90 [534552.835980] [<ffffffff810b0460>] ? kthread_create_on_node+0x140/0x140 This issue is made worse when the 8051 is busy and the reads take longer. Fix by using a non-spinning lock procure. Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Reviewed-by: Mike Marciszyn <mike.marciniszyn@intel.com> Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-22IB/hfi1: Check for QSFP presence before attempting readsEaswar Hariharan1-2/+5
[ Upstream commit fb897ad315643e5dc1092a115b3cec914b66df9d ] Attempting to read the status of a QSFP cable creates noise in the logs and misses out on setting an appropriate Offline/Disabled Reason if the cable is not plugged in. Check for this prior to attempting the read and attendant retries. Fixes: 673b975f1fba ("IB/hfi1: Add QSFP sanity pre-check") Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Easwar Hariharan <easwar.hariharan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-20Ib/hfi1: Return actual operational VLs in port info queryPatel Jay P1-1/+1
[ Upstream commit 00f9203119dd2774564407c7a67b17d81916298b ] __subn_get_opa_portinfo stores value returned by hfi1_get_ib_cfg() as operational vls. hfi1_get_ib_cfg() returns vls_operational field in hfi1_pportdata. The problem with this is that the value is always equal to vls_supported field in hfi1_pportdata. The logic to calculate operational_vls is to set value passed by FM (in __subn_set_opa_portinfo routine). If no value is passed then default value is stored in operational_vls. Field actual_vls_operational is calculated on the basis of buffer control table. Hence, modifying hfi1_get_ib_cfg() to return actual_operational_vls when used with HFI1_IB_CFG_OP_VLS parameter Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Patel Jay P <jay.p.patel@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-21IB/hfi1: Allocate context data on memory nodeSebastian Sanchez1-8/+9
[ Upstream commit b448bf9a0df6093dbadac36979a55ce4e012a677 ] There are some memory allocation calls in hfi1_create_ctxtdata() that do not use the numa function parameter. This can cause cache lines to be filled over QPI. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-21IB/hfi1: Use static CTLE with Preset 6 for integrated HFIsEaswar Hariharan1-2/+2
[ Upstream commit 39e2afa8d042a53d855137d4c5a689a6f5492b39 ] After extended testing, it was found that the previous PCIe Gen 3 recipe, which used adaptive CTLE with Preset 4, could cause an NMI/Surprise Link Down in about 1 in 100 to 1 in 1000 power cycles on some platforms. New EV data combined with extensive empirical data indicates that the new recipe should use static CTLE with Preset 6 for all integrated silicon SKUs. Fixes: c3f8de0b334c ("IB/hfi1: Add static PCIe Gen3 CTLE tuning") Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Easwar Hariharan <easwar.hariharan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-27IB/{qib, hfi1}: Avoid flow control testing for RDMA write operationMike Marciniszyn1-1/+2
commit 5b0ef650bd0f820e922fcc42f1985d4621ae19cf upstream. Section 9.7.7.2.5 of the 1.3 IBTA spec clearly says that receive credits should never apply to RDMA write. qib and hfi1 were doing that. The following situation will result in a QP hang: - A prior SEND or RDMA_WRITE with immmediate consumed the last credit for a QP using RC receive buffer credits - The prior op is acked so there are no more acks - The peer ULP fails to post receive for some reason - An RDMA write sees that the credits are exhausted and waits - The peer ULP posts receive buffers - The ULP posts a send or RDMA write that will be hung The fix is to avoid the credit test for the RDMA write operation. Reviewed-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-07RDMA/qib,hfi1: Fix MR reference count leak on write with immediateMike Marciniszyn1-1/+4
commit 1feb40067cf04ae48d65f728d62ca255c9449178 upstream. The handling of IB_RDMA_WRITE_ONLY_WITH_IMMEDIATE will leak a memory reference when a buffer cannot be allocated for returning the immediate data. The issue is that the rkey validation has already occurred and the RNR nak fails to release the reference that was fruitlessly gotten. The the peer will send the identical single packet request when its RNR timer pops. The fix is to release the held reference prior to the rnr nak exit. This is the only sequence the requires both rkey validation and the buffer allocation on the same packet. Tested-by: Tadeusz Struk <tadeusz.struk@intel.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-25IB/hfi1: Fix a subcontext memory leakMichael J. Ruhl3-15/+23
commit 224d71f910102c966cdcd782c97e096d5e26e4da upstream. The only context that frees user_exp_rcv data structures is the last context closed (from a sub-context set). This leaks the allocations from the other sub-contexts. Separate the common frees from the specific frees and call them at the appropriate time. Using KEDR to check for memory leaks we get: Before test: [leak_check] Possible leaks: 25 After test: [leak_check] Possible leaks: 31 (6 leaked data structures) After patch applied (before and after test have the same value) [leak_check] Possible leaks: 25 Each leak is 192 + 13440 + 6720 = 20352 bytes per sub-context. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-25IB/hfi1: Return an error on memory allocation failureMichael J. Ruhl1-0/+1
commit 94679061dcdddbafcf24e3bfb526e54dedcc2f2f upstream. If the eager buffer allocation fails, it is necessary to return an error code. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-20IB/hfi1: Prevent kernel QP post send hard lockupsMike Marciniszyn3-14/+22
commit b6eac931b9bb2bce4db7032c35b41e5e34ec22a5 upstream. The driver progress routines can call cond_resched() when a timeslice is exhausted and irqs are enabled. If the ULP had been holding a spin lock without disabling irqs and the post send directly called the progress routine, the cond_resched() could yield allowing another thread from the same ULP to deadlock on that same lock. Correct by replacing the current hfi1_do_send() calldown with a unique one for post send and adding an argument to hfi1_do_send() to indicate that the send engine is running in a thread. If the routine is not running in a thread, avoid calling cond_resched(). Fixes: Commit 831464ce4b74 ("IB/hfi1: Don't call cond_resched in atomic mode when sending packets") Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-16IB/hfi1: Remove incorrect IS_ERR checkDennis Dalessandro1-1/+1
Remove IS_ERR check from caching code as the function being called does not actually return error pointers. Fixes: f19bd643dbde: "IB/hfi1: Prevent NULL pointer deferences in caching code" Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Dean Luick <dean.luick@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-11-16IB/hfi1: Prevent hardware counter names from being cut offJianxin Xiong1-1/+1
Increase the size of the buffer that is used to construct per-VL and per-SDMA counter names. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jianxin Xiong <jianxin.xiong@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-11-16IB/hfi1: Fix ECN processing in prescan_rxqDasaratharaman Chandramouli1-9/+11
When processing ECN via the prescan_rxq path, some fields in the packet structure are passed uninitialized. This can potentially cause NULL pointer exceptions during ECN handling. Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-11-16IB/hfi1: Fix status error code for unsupported packetsJakub Pawlak2-2/+18
Set the status code BAD_L2 when unsupported type of packet is received and dropped. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jakub Pawlak <jakub.pawlak@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-11-16IB/hfi1: Relocate rcvhdrcnt module parameter check.Krzysztof Blaszkowski1-18/+26
Validate the rcvhdrcnt module parameter in a single function at module load time. This allows proper error reporting. Reviewed-by: Dean Luick <dean.luick@intel.com> Signed-off-by: Krzysztof Blaszkowski <krzysztof.blaszkowski@intel.com> Signed-off-by: Tymoteusz Kielan <tymoteusz.kielan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-11-16IB/hfi1: Fix rnr_timer additionIra Weiny1-1/+1
The new s_rnr_timeout was not properly being set and the code was incorrectly setting a different timer. Found by code inspection. Cc: <stable@vger.kernel.org> # 4.7.x Fixes: 08279d5c9424 ("staging/rdma/hfi1: use new RNR timer") Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-11-16IB/hfi1: Delete unused lockEaswar Hariharan2-3/+0
The lock is an unused vestige from qib. Remove it. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Easwar Hariharan <easwar.hariharan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-11-16IB/hfi1: Clean up unused argumentEaswar Hariharan3-5/+3
hfi1_pcie_ddinit takes the PCI device id as an argument but never uses it. Clean it up. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Easwar Hariharan <easwar.hariharan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-11-16IB/hfi1: Remove leftover snoop referencesDennis Dalessandro3-114/+4
A few snoop related variables were missed in the snoop/capture removal to get out of staging. Go back and clean those up too. Reviewed-by: Dean Luick <dean.luick@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-11-16IB/hfi1: Fix a potential memory leak in hfi1_create_ctxts()Jianxin Xiong1-6/+7
In the function hfi1_create_ctxts the array "dd->rcd" is allocated and then populated with allocated resources in a loop. Previously, if error happened during the loop, only resource allocated in the current iteration would be freed. The array itself would then be freed, leaving the resources that were allocated in previous iterations and referenced by the array elements in limbo. This patch makes sure all allocated resources are freed before freeing the array "dd->rcd". Also the resource allocation now takes account of the numa node the device is attached to. Reviewed-by: Tadeusz Struk <tadeusz.struk@intel.com> Signed-off-by: Jianxin Xiong <jianxin.xiong@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-11-16IB/hfi1: Return ENODEV for unsupported PCI device ids.Krzysztof Blaszkowski1-13/+12
Clean up device type checking. Reviewed-by: Dean Luick <dean.luick@intel.com> Signed-off-by: Krzysztof Blaszkowski <krzysztof.blaszkowski@intel.com> Signed-off-by: Tymoteusz Kielan <tymoteusz.kielan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-11-16IB/hfi1: Fix an Oops on pci device force removeTadeusz Struk4-5/+44
This patch fixes an Oops on device unbind, when the device is used by a PSM user process. PSM processes access device resources which are freed on device removal. Similar protection exists in uverbs in ib_core for Verbs clients, but PSM doesn't use ib_uverbs hence a separate protection is required for PSM clients. Cc: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Dean Luick <dean.luick@intel.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-11-16IB/hfi1: Fix integrity check flags default valuesJakub Pawlak3-40/+32
Prevent setting up integrity check flags when module is loaded with NO_INTEGRITY capability. Reviewed-by: Dean Luick <dean.luick@intel.com> Signed-off-by: Jakub Pawlak <jakub.pawlak@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-11-16IB/hfi1: Remove redundant sysfs irq affinity entryTadeusz Struk3-101/+0
The IRQ affinity entry is not needed after the irq notifier patch has been added to the hfi1 driver. The irq affinity settings for SDMA engine should be set using the standard /proc/irq/<N>/ interface. Reviewed-by: Jianxin Xiong <jianxin.xiong@intel.com> Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-10-10Merge tag 'for-linus' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma Pull main rdma updates from Doug Ledford: "This is the main pull request for the rdma stack this release. The code has been through 0day and I had it tagged for linux-next testing for a couple days. Summary: - updates to mlx5 - updates to mlx4 (two conflicts, both minor and easily resolved) - updates to iw_cxgb4 (one conflict, not so obvious to resolve, proper resolution is to keep the code in cxgb4_main.c as it is in Linus' tree as attach_uld was refactored and moved into cxgb4_uld.c) - improvements to uAPI (moved vendor specific API elements to uAPI area) - add hns-roce driver and hns and hns-roce ACPI reset support - conversion of all rdma code away from deprecated create_singlethread_workqueue - security improvement: remove unsafe ib_get_dma_mr (breaks lustre in staging)" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (75 commits) staging/lustre: Disable InfiniBand support iw_cxgb4: add fast-path for small REG_MR operations cxgb4: advertise support for FR_NSMR_TPTE_WR IB/core: correctly handle rdma_rw_init_mrs() failure IB/srp: Fix infinite loop when FMR sg[0].offset != 0 IB/srp: Remove an unused argument IB/core: Improve ib_map_mr_sg() documentation IB/mlx4: Fix possible vl/sl field mismatch in LRH header in QP1 packets IB/mthca: Move user vendor structures IB/nes: Move user vendor structures IB/ocrdma: Move user vendor structures IB/mlx4: Move user vendor structures IB/cxgb4: Move user vendor structures IB/cxgb3: Move user vendor structures IB/mlx5: Move and decouple user vendor structures IB/{core,hw}: Add constant for node_desc ipoib: Make ipoib_warn ratelimited IB/mlx4/alias_GUID: Remove deprecated create_singlethread_workqueue IB/ipoib_verbs: Remove deprecated create_singlethread_workqueue IB/ipoib: Remove deprecated create_singlethread_workqueue ...
2016-10-07IB/{core,hw}: Add constant for node_descYuval Shaia1-1/+2
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-10-02IB/hfi1: Fix trace of atomic ackMike Marciniszyn2-3/+3
The length is incorrect, causing the trace data to be truncated. Add the additional 8 bytes that should have been there. Also trace out the atomic ack in hex to aid debugging. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-10-02IB/hfi1: Update SMA ingress checks for response packetsJianxin Xiong1-25/+24
Fix "unsupported method" error by skipping ingress pkey checks on response SMA packets. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Jianxin Xiong <jianxin.xiong@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-10-02IB/hfi1: Use EPROM platform configuration readDean Luick2-15/+26
The driver will now try to read directly from the EPROM as its first choice for the platform configuration file. Reviewed-by: Easwar Hariharan <easwar.hariharan@intel.com> Signed-off-by: Dean Luick <dean.luick@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-10-02IB/hfi1: Add ability to read platform config from the EPROMDean Luick2-0/+84
Add a function to read the platform configuration file from the EPROM. Reviewed-by: Easwar Hariharan <easwar.hariharan@intel.com> Signed-off-by: Dean Luick <dean.luick@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-10-02IB/hfi1: Restore EPROM read abilityDean Luick3-3/+103
Partially revert commit d07903174202 ("IB/hfi1: Remove EPROM functionality from data device"), bringing back the ability to read from the EPROM. This code will be used for driver-only acccess to the EPROM, hence change EPROM read to save to a buffer instead of copy touser. Also allow any offset and remove missed includes and leftover declarations. Reviewed-by: Easwar Hariharan <easwar.hariharan@intel.com> Signed-off-by: Dean Luick <dean.luick@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-10-02IB/hfi1: Add new debugfs sdma_cpu_list fileTadeusz Struk3-0/+83
Add a debugfs sdma_cpu_list file that can be used to examine the CPU to sdma engine assignments for the whole device. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Sebastian Sanchez <sebastian.sanchez@intel.com> Reviewed-by: Jianxin Xiong <jianxin.xiong@intel.com> Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-10-02IB/hfi1: Add irq affinity notification handlerTadeusz Struk2-10/+103
This patch adds an irq affinity notification handler. When a user changes interrupt affinity settings for an sdma engine, the driver needs to make changes to its internal sde structures and also update the affinity_hint. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Sebastian Sanchez <sebastian.sanchez@intel.com> Reviewed-by: Jianxin Xiong <jianxin.xiong@intel.com> Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-10-02IB/hfi1: Add a new VL sysfs attribute for sdma enginesTadeusz Struk1-1/+14
This patch adds a read-only "VL" attribute for the sysfs entry of each sdma engine. It will allow the user to check VL to sdma engine mappings. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Sebastian Sanchez <sebastian.sanchez@intel.com> Reviewed-by: Jianxin Xiong <jianxin.xiong@intel.com> Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-10-02IB/hfi1: Add sysfs interface for affinity setupTadeusz Struk5-7/+412
Some users want more control over which cpu cores are being used by the driver. For example, users might want to restrict the driver to some specified subset of the cores so that they can appropriately partition processes, irq handlers, and work threads. To allow the user to fine tune system affinity settings new sysfs attributes are introduced per sdma engine. This patch adds a new attribute type for sdma engine and a new cpu_list attribute. When the user writes a cpu range to the cpu_list attribute the driver will create an internal cpu->sdma map, which will be used later as a look-up table to choose an optimal engine for a user requests. Reviewed-by: Dean Luick <dean.luick@intel.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Sebastian Sanchez <sebastian.sanchez@intel.com> Reviewed-by: Jianxin Xiong <jianxin.xiong@intel.com> Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-10-02IB/hfi1: Fix resource release in context allocationJakub Pawlak2-5/+13
Correct resource free in allocate_ctxt() function. When context creation fails allocated resources are properly released and pointer in receive context data table is set back to NULL. Reviewed-by: Dean Luick <dean.luick@intel.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jakub Pawlak <jakub.pawlak@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-10-02IB/hfi1: Remove unused variable from devdataDennis Dalessandro1-2/+0
We no longer use an error tasklet. Remove it from the hfi1_devdata structure. Reviewed-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-10-02IB/hfi1: Cleanup tasklet refs in commentsDennis Dalessandro2-10/+10
The code no longer uses tasklets for the send engine. However it does use a tasklet for sdma but the send routines use a workqueue now days. Update the comments to reflect that. Make things more generic with saying "send engine" because that is what is being referred to. Reviewed-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-28 01:32:51 +0300