summaryrefslogtreecommitdiff
path: root/drivers/infiniband/hw/cxgb4
AgeCommit message (Collapse)AuthorFilesLines
2016-05-14RDMA/iw_cxgb4: stop_ep_timer() after MPA negotiationHariprasad S2-20/+20
->Stop the ep timer after MPA negotiation so that the arp failures during send_mpa_reply/reject will be handled by process_timeout() after the ep timer expires. ->Added case MPA_REP_SENT in process_timeout(). ->For MPA reject, c4iw_ep_disconnect tries to start an already started timer, which leads to warning message "timer already started". -> In case of mpa reject stop the timer and call send_mpa_reject(). -> Added new ep flag STOP_MPA_TIMER to tell fw4_ack() to stop the timer only for send_mpa_reply(), which is set in c4iw_accept_cr(). Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-05-14RDMA/iw_cxgb4: Do not stop timer in case of incomplete messagesHariprasad S1-14/+16
In case of incomplete mpa messages we should not stop timer as it results in return with timeout for the next mpa message Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-05-14RDMA/iw_cxgb4: parent_ep has to be dereferenced in case of passive accept ↵Hariprasad S1-6/+19
failure -> On passive side of connection parent_ep referenced during connection request has to be dereferenced during the passive accept failure. -> As passive accept failure error handlinglogic runs in atomic context, the parent ep is dereferenced by scheduling work request. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-05-14RDMA/iw_cxgb4: set the correct FID value in DSGL commandsHariprasad S1-2/+3
The FID value in a ULP_MEMIO command needs to be set to an IQ ID of a queue configured for our PF. The FID/IQ id is used to index into the PCIE FID table, to find out on which function the DMA needs to be issued. Essentially, every DMA needs to have the ingress queue. The exact ingress queue doesn't matter, but it needs to be an ingress queue associated with the function you want to see the DMA on. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-05-14RDMA/iw_cxgb4: Correct RFC number of MPAHariprasad S1-1/+1
Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-05-14RDMA/iw_cxgb4: Add few history bits for epHariprasad S2-18/+36
- add EP_DISC_FAIL history bit - add QP_REFED/DEREFED history bits - Add functions to ref/deref the cm_id and add history bit for the same - add CLOSE_CON_RPL history Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-05-13IB/core: Enhance ib_map_mr_sg()Bart Van Assche2-2/+2
The SRP initiator allows to set max_sectors to a value that exceeds the largest amount of data that can be mapped at once with an mlx4 HCA using fast registration and a page size of 4 KB. Hence modify ib_map_mr_sg() such that it can map partial sg-elements. If an sg-element has been mapped partially, let the caller know which fraction has been mapped by adjusting *sg_offset. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Tested-by: Laurence Oberman <loberman@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-05-13IB/core: Add passing an offset into the SG to ib_map_mr_sgChristoph Hellwig2-7/+5
Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Steve Wise <swise@opengridcomputing.com> Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-05-05RDMA/iw_cxgb4: remove abort_connection() usage from ep_timeout()Hariprasad S1-10/+2
Use c4iw_ep_disconnect() instead. This is part of getting rid of abort_connection() altogether so we properly clean up on send_abort() failures. This is the last user of abort_connection(), so remove it too. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-05-05RDMA/iw_cxgb4: move QP -> ERROR on fatal disconnect errorsHariprasad S1-0/+13
In c4iw_ep_disconnect(), if we fail to initiate a close operation, then move the qp to ERROR to disassociate the ep from the qp. Failure to do this will leak the ep resources. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-05-05RDMA/iw_cxgb4: don't use abort_connection in process_mpa_request()Hariprasad S1-29/+35
Instead return whether the caller needs to disconnect. This is part of getting rid of abort_connection() altogether so we properly clean up on send_abort() failures. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-05-05RDMA/iw_cxgb4: remove abort_connection() usage from accept/rejectHariprasad S1-14/+15
Use c4iw_ep_disconnect() instead. This is part of getting rid of abort_connection() altogether so we properly clean up on send_abort() failures. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-05-05RDMA/iw_cxgb4: free resources when send_flowc() failsHariprasad S1-5/+18
Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-05-05RDMA/iw_cxgb4: remove connection abort from process_mpa_replyHariprasad S1-2/+13
Instead, have the caller, rx_data() handle the close/abort like it does for process_mpa_request(). This is part of getting rid of abort_connection() altogether so we properly clean up on send_abort() failures. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-05-05RDMA/iw_cxgb4: ensure eps don't get freed while the mutex is heldHariprasad S1-0/+7
In rx_data(), with the ep in FPDU_MODE, refcnt=2, if we get unexpected streaming data, we call c4iw_modify_rc_qp() and move the qp from RTS -> TERMINATE. In c4iw_modify_rc_qp(), if rdma_fini() returns an error, the ep will be dereferenced (refcnt=1). Then rx_data() calls c4iw_ep_disconnect() which starts the close operation. But if send_halfclose() fails in c4iw_ep_disconnect(), we will call release_ep_resources() derefing the ep which reduces the refcnt to 0 and and frees the ep. However we still has the ep mutex at that point, so we have a touch-after-free bug. There is a similar issue where peer_close() calls c4iw_ep_disconnect(). The solution is to add a reference to the ep in c4iw_ep_disconnect() after acquiring the mutex, and release it after releasing the mutex. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-05-05RDMA/iw_cxgb4: stop ep timer on close failureHariprasad S1-1/+6
In c4iw_ep_disconnect(), if we start the ep timer to begin a close, but send_halfclose() fails, we need to stop the timer and send a CLOSE event up to the IWCM before releasing the resources. Otherwise, we can crash when the ep timer fires if the ep is referencing a previous instance of the device. This can happen as part of adapter reset/recovery, for instance. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-05-05RDMA/iw_cxgb4: release ep resources on accept arp failureHariprasad S1-16/+66
If ARP fails before the CPL_PASS_ACCEPT_RPL is seen by hardware, the tid will be stuck in SYN_PEND and never released. So create an arp failure handler specifically for this message to release the endpoint resources. In pass_accept_rpl_arp_failure(), put the parent endpoint so it will be freed when destroyed. Also we don't need to call release_tid() here because _c4iw_free_ep() calls cxgb4_remove_tid() which releases the hwtid. If we get an ABORT_REQ_RSS instead of a PASS_ESTABLISH (because the peer's ACK to our SYN is never received), then put the parent as well in peer_abort(). Treat accept_cr() failures just like arp failures: put the parent ep and release the ep resources destroying the tid The ARP failure handlers are called in an atomic context, so we need to schedule some of the processing which might block. Namely _c4iw_free_ep() which needs a mutex. So create a "special" CPL opcode and handler and schedule it via sched() to be run by process_work() in a blockable context. Also rework the active open arp failure handler to make use of release_ep_resources(). This allows both the active and passive arp failure handlers to use the same deferred cleanup function. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-04-26RDMA/iw_cxgb4: Fix bar2 virt addr calculation for T4 chipsHariprasad S2-2/+6
For T4, kernel mode qps don't use the user doorbell. User mode qps during flow control db ringing are forced into kernel, where user doorbell is treated as kernel doorbell and proper bar2 offset in bar2 virtual space is calculated, which incase of T4 is a bogus address, causing a kernel panic due to illegal write during doorbell ringing. In case of T4, kernel mode qp bar2 virtual address should be 0. Added T4 check during bar2 virtual address calculation to return 0. Fixed Bar2 range checks based on bar2 physical address. The below oops will be fixed <1>BUG: unable to handle kernel paging request at 000000000002aa08 <1>IP: [<ffffffffa011d800>] c4iw_uld_control+0x4e0/0x880 [iw_cxgb4] <4>PGD 1416a8067 PUD 15bf35067 PMD 0 <4>Oops: 0002 [#1] SMP <4>last sysfs file: /sys/devices/pci0000:00/0000:00:03.0/0000:02:00.4/infiniband/cxgb4_0/node_guid <4>CPU 5 <4>Modules linked in: rdma_ucm rdma_cm ib_cm ib_sa ib_mad ib_uverbs ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge autofs4 target_core_iblock target_core_file target_core_pscsi target_core_mod configfs bnx2fc cnic uio fcoe libfcoe libfc scsi_transport_fc scsi_tgt 8021q garp stp llc cpufreq_ondemand acpi_cpufreq freq_table mperf vhost_net macvtap macvlan tun kvm uinput microcode iTCO_wdt iTCO_vendor_support sg joydev serio_raw i2c_i801 i2c_core lpc_ich mfd_core e1000e ptp pps_core ioatdma dca i7core_edac edac_core shpchp ext3 jbd mbcache sd_mod crc_t10dif pata_acpi ata_generic ata_piix iw_cxgb4 iw_cm ib_core ib_addr cxgb4 ipv6 dm_mirror dm_region_hash dm_log dm_mod [last unloaded: scsi_wait_scan] <4> Supermicro X8ST3/X8ST3 <4>RIP: 0010:[<ffffffffa011d800>] [<ffffffffa011d800>] c4iw_uld_control+0x4e0/0x880 [iw_cxgb4] <4>RSP: 0000:ffff880155a03db0 EFLAGS: 00010006 <4>RAX: 000000000000001d RBX: ffff88013ae5fc00 RCX: ffff880155adb180 <4>RDX: 000000000002aa00 RSI: 0000000000000001 RDI: ffff88013ae5fdf8 <4>RBP: ffff880155a03e10 R08: 0000000000000000 R09: 0000000000000001 <4>R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 <4>R13: 000000000000001d R14: ffff880156414ab0 R15: ffffe8ffffc05b88 <4>FS: 0000000000000000(0000) GS:ffff8800282a0000(0000) knlGS:0000000000000000 <4>CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b <4>CR2: 000000000002aa08 CR3: 000000015bd0e000 CR4: 00000000000007e0 <4>DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 <4>DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 <4>Process cxgb4 (pid: 394, threadinfo ffff880155a00000, task ffff880156414ab0) <4>Stack: <4> ffff880156415068 ffff880155adb180 ffff880155a03df0 ffffffffa00a344b <4><d> 00000000000003e8 ffff880155920000 0000000000000004 ffff880155920000 <4><d> ffff88015592d438 ffffffffa00a3860 ffff880155a03fd8 ffffe8ffffc05b88 <4>Call Trace: <4> [<ffffffffa00a344b>] ? enable_txq_db+0x2b/0x80 [cxgb4] <4> [<ffffffffa00a3860>] ? process_db_full+0x0/0xa0 [cxgb4] <4> [<ffffffffa00a38a6>] process_db_full+0x46/0xa0 [cxgb4] <4> [<ffffffff8109fda0>] worker_thread+0x170/0x2a0 <4> [<ffffffff810a6aa0>] ? autoremove_wake_function+0x0/0x40 <4> [<ffffffff8109fc30>] ? worker_thread+0x0/0x2a0 <4> [<ffffffff810a660e>] kthread+0x9e/0xc0 <4> [<ffffffff8100c28a>] child_rip+0xa/0x20 <4> [<ffffffff810a6570>] ? kthread+0x0/0xc0 <4> [<ffffffff8100c280>] ? child_rip+0x0/0x20 <4>Code: e9 ba 00 00 00 66 0f 1f 44 00 00 44 8b 05 29 07 02 00 45 85 c0 0f 85 71 02 00 00 8b 83 70 01 00 00 45 0f b7 ed c1 e0 0f 44 09 e8 <89> 42 08 0f ae f8 66 c7 83 82 01 00 00 00 00 44 0f b7 ab dc 01 <1>RIP [<ffffffffa011d800>] c4iw_uld_control+0x4e0/0x880 [iw_cxgb4] <4> RSP <ffff880155a03db0> <4>CR2: 000000000002aa08` Based on original work by Bharat Potnuri <bharat@chelsio.com> Fixes: 74217d4c6a4fb0d8 ("iw_cxgb4: support for bar2 qid densities exceeding the page size") Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Reviewed-by: Leon Romanovsky <leon@leon.nu> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-04-26iw_cxgb4: handle draining an idle qpSteve Wise1-2/+16
In c4iw_drain_sq/rq(), if the particular queue is already empty then don't block. Fixes: ce4af14d94aa ('iw_cxgb4: add queue drain functions') Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-04-26iw_cxgb4: initialize ibdev.iwcm->ifname for port mappingSteve Wise1-0/+2
The IWCM uses ibdev.iwcm->ifname for registration with the iwarp port map daemon. But iw_cxgb4 did not initialize this field which causes intermittent registration failures based on the contents of the uninitialized memory. Fixes: 170003c894d9 ("iw_cxgb4: remove port mapper related code") Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-03-24Merge branch 'for-next-merge' of ↵Linus Torvalds1-99/+0
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending Pull more SCSI target updates from Nicholas Bellinger: "This series contains cxgb4 driver prerequisites for supporting iscsi segmentation offload (ISO), that will be utilized for a number of future v4.7 developments in iscsi-target for supporting generic hw offloads" * 'for-next-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: cxgb4: update Kconfig and Makefile cxgb4: add iSCSI DDP page pod manager cxgb4, iw_cxgb4: move delayed ack macro definitions cxgb4: move VLAN_NONE macro definition cxgb4: update struct cxgb4_lld_info definition cxgb4: add definitions for iSCSI target ULD cxgb4, cxgb4i: move struct cpl_rx_data_ddp definition cxgb4, iw_cxgb4, cxgb4i: remove duplicate definitions cxgb4, iw_cxgb4: move definitions to common header file cxgb4: large receive offload support cxgb4: allocate resources for CXGB4_ULD_ISCSIT cxgb4: add new ULD type CXGB4_ULD_ISCSIT
2016-03-22cxgb4, iw_cxgb4: move delayed ack macro definitionsVarun Prakash1-9/+0
move delayed ack macro definitions to common header file t4_msg.h. Signed-off-by: Varun Prakash <varun@chelsio.com> Acked-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2016-03-22cxgb4, iw_cxgb4, cxgb4i: remove duplicate definitionsVarun Prakash1-9/+0
move struct ulptx_idata definition to common header file t4_msg.h. Signed-off-by: Varun Prakash <varun@chelsio.com> Acked-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2016-03-22cxgb4, iw_cxgb4: move definitions to common header fileVarun Prakash1-81/+0
move struct tcp_options, struct cpl_pass_accept_req, enum defining congestion control algorithms and associated macros to common header file t4_msg.h Signed-off-by: Varun Prakash <varun@chelsio.com> Acked-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2016-03-16Merge branches 'nes', 'cxgb4' and 'iwpm' into k.o/for-4.6Doug Ledford6-335/+155
2016-03-16iw_cxgb4: remove port mapper related codeSteve Wise3-264/+65
Now that most of the port mapper code been moved to iwcm, we can remove it from iw_cxgb4. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-03-16Merge branches 'mlx4', 'mlx5' and 'ocrdma' into k.o/for-4.6Doug Ledford2-2/+5
2016-03-01IB/core: Add vendor's specific data to alloc mwMatan Barak2-2/+5
Passing udata to the vendor's driver in order to pass data from the user-space driver to the kernel-space driver. This data will be used in downstream patches. Signed-off-by: Matan Barak <matanb@mellanox.com> Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-03-01iw_cxgb4: add queue drain functionsSteve Wise4-1/+30
Add completion objects, named sq_drained and rq_drained, to the c4iw_qp struct. The queue-specific completion object is signaled when the last CQE is drained from the CQ for that queue. Add c4iw_drain_sq() to block until qp->rq_drained is completed. Add c4iw_drain_rq() to block until qp->sq_drained is completed. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-03-01infiniband: cxgb4: use %pR format string for printing resourcesArnd Bergmann1-3/+2
The cxgb4 prints an MMIO resource using the "0x%x" and "%p" format strings on the length and start, respective, but that triggers a compiler warning when using a 64-bit resource_size_t on a 32-bit architecture: drivers/infiniband/hw/cxgb4/device.c: In function 'c4iw_rdev_open': drivers/infiniband/hw/cxgb4/device.c:807:7: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] (void *)pci_resource_start(rdev->lldi.pdev, 2), This changes the format string to use %pR instead, which pretty-prints the resource, avoids the warning and is shorter. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-03-01iw_cxgb4: Max fastreg depth depends on DSGL supportHariprasad S3-10/+11
The max depth of a fastreg mr depends on whether the device supports DSGL or not. So compute it dynamically based on the device support and the module use_dsgl option. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-03-01cxgb4/iw_cxgb4: TOS supportHariprasad S1-17/+34
This series provides support for iWARP applications to specify a TOS value and have that map to a VLAN Priority for iw_cxgb4 iWARP connections. In iw_cxgb4, when allocating an L2T entry, pass the skb_priority based on the tos value in the cm_id. Also pass the correct tos value during connection setup so the passive side gets the client's desired tos. When sending the FLOWC work request to FW, if the egress device is in a vlan, then use the vlan priority bits as the scheduling class. This allows associating RDMA connections with scheduling classes to provide traffic shaping per flow. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-03-01iw_cxgb4: remove false error log entryHariprasad S1-2/+1
Don't log errors if a listening endpoint is going away when procesing a PASS_ACCEPT_REQ message. This can happen. Change the error printk to a PDBG() debug log entry Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-03-01iw_cxgb4: make queue allocation code more readableHariprasad S1-39/+42
Rename local mm* variables to more meaningful names Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-24Merge tag 'for-linus' of ↵Linus Torvalds9-312/+43
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma Pull rdma updates from Doug Ledford: "Initial roundup of 4.5 merge window patches - Remove usage of ib_query_device and instead store attributes in ib_device struct - Move iopoll out of block and into lib, rename to irqpoll, and use in several places in the rdma stack as our new completion queue polling library mechanism. Update the other block drivers that already used iopoll to use the new mechanism too. - Replace the per-entry GID table locks with a single GID table lock - IPoIB multicast cleanup - Cleanups to the IB MR facility - Add support for 64bit extended IB counters - Fix for netlink oops while parsing RDMA nl messages - RoCEv2 support for the core IB code - mlx4 RoCEv2 support - mlx5 RoCEv2 support - Cross Channel support for mlx5 - Timestamp support for mlx5 - Atomic support for mlx5 - Raw QP support for mlx5 - MAINTAINERS update for mlx4/mlx5 - Misc ocrdma, qib, nes, usNIC, cxgb3, cxgb4, mlx4, mlx5 updates - Add support for remote invalidate to the iSER driver (pushed through the RDMA tree due to dependencies, acknowledged by nab) - Update to NFSoRDMA (pushed through the RDMA tree due to dependencies, acknowledged by Bruce)" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (169 commits) IB/mlx5: Unify CQ create flags check IB/mlx5: Expose Raw Packet QP to user space consumers {IB, net}/mlx5: Move the modify QP operation table to mlx5_ib IB/mlx5: Support setting Ethernet priority for Raw Packet QPs IB/mlx5: Add Raw Packet QP query functionality IB/mlx5: Add create and destroy functionality for Raw Packet QP IB/mlx5: Refactor mlx5_ib_qp to accommodate other QP types IB/mlx5: Allocate a Transport Domain for each ucontext net/mlx5_core: Warn on unsupported events of QP/RQ/SQ net/mlx5_core: Add RQ and SQ event handling net/mlx5_core: Export transport objects IB/mlx5: Expose CQE version to user-space IB/mlx5: Add CQE version 1 support to user QPs and SRQs IB/mlx5: Fix data validation in mlx5_ib_alloc_ucontext IB/sa: Fix netlink local service GFP crash IB/srpt: Remove redundant wc array IB/qib: Improve ipoib UD performance IB/mlx4: Advertise RoCE v2 support IB/mlx4: Create and use another QP1 for RoCEv2 IB/mlx4: Enable send of RoCE QP1 packets with IP/UDP headers ...
2016-01-19iw_cxgb4: Take clip reference before starting IPv6 listenHariprasad S1-4/+10
The h/w is designed in such a way that, if you do anything IPv6 related, a valid clip entry must be there. So take clip reference before creating IPv6 listening servers, and then if we fail to create server, release the clip entry. Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Acked-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19iw_cxgb4: Fixes GW-Basic labels to meaningful error namesHariprasad S1-28/+17
Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19iw_cxgb4: Fixes static checker warning in c4iw_rdev_open()Hariprasad S1-4/+4
Commit c5dfb000b904 ("iw_cxgb4: Pass qid range to user space driver") from Dec 11, 2015, leads to the following static checker warning: drivers/infiniband/hw/cxgb4/device.c:857 c4iw_rdev_open() warn: variable dereferenced before check 'rdev->status_page' Also we weren't deallocating ocqp pool in error path when failed to allocate status page. Fixing it too. Fixes: c5dfb000b904 ("iw_cxgb4: Pass qid range to user space driver") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-15Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree updates from Jiri Kosina. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: floppy: make local variable non-static exynos: fixes an incorrect header guard dt-bindings: fixes some incorrect header guards cpufreq-dt: correct dead link in documentation cpufreq: ARM big LITTLE: correct dead link in documentation treewide: Fix typos in printk Documentation: filesystem: Fix typo in fs/eventfd.c fs/super.c: use && instead of & for warn_on condition Documentation: fix sysfs-ptp lib: scatterlist: fix Kconfig description
2015-12-24iw_cxgb4: Pass qid range to user space driverHariprasad S3-1/+12
Enhances the t4_dev_status_page to pass the qid start and size attributes from iw_cxgb4 to libcxgb4. Bump the ABI Version to 3 -> To allow libcxgb4 to detect old drivers and revert to the old way of computing the qid ranges. Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-12-23IB: remove the write-only usecnt field from struct ib_mrChristoph Hellwig1-3/+0
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bvanassche@sandisk.com> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-12-23IB: remove in-kernel support for memory windowsChristoph Hellwig4-11/+0
Remove the unused ib_allow_mw and ib_bind_mw functions, remove the unused IB_WR_BIND_MW and IB_WC_BIND_MW opcodes and move ib_dealloc_mw into the uverbs module. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> [core] Reviewed-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-12-23IB: remove support for phys MRsChristoph Hellwig3-261/+0
We have stopped using phys MRs in the kernel a while ago, so let's remove all the cruft used to implement them. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> [core] Reviewed-By: Devesh Sharma<devesh.sharma@avagotech.com> [ocrdma] Reviewed-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-12-08treewide: Fix typos in printkMasanari Iida1-1/+1
This patch fix multiple spelling typos found in various part of kernel. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-10-29iw_cxgb4: Remove old FRWR APISagi Grimberg5-143/+1
No ULP uses it anymore, go ahead and remove it. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-10-29iw_cxgb4: Support the new memory registration APISagi Grimberg4-0/+120
Support the new memory registration API by allocating a private page list array in c4iw_mr and populate it when c4iw_map_mr_sg is invoked. Also, support IB_WR_REG_MR by duplicating build_fastreg just take the needed information from different places: - page_size, iova, length (ib_mr) - page array (c4iw_mr) - key, access flags (ib_reg_wr) The IB_WR_FAST_REG_MR handlers will be removed later when all the ULPs will be converted. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Acked-by: Christoph Hellwig <hch@lst.de> Tested-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-10-29Merge branch 'wr-cleanup' into k.o/for-4.4Doug Ledford1-25/+21
2015-10-22iw_cxgb4: Adds support for T6 adapterHariprasad S5-146/+204
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-10-22iw_cxgb4: reverse the ord/ird in the ESTABLISHED upcallHariprasad S1-2/+2
The ESTABLISHED event should have the peer's ord/ird so swap the values in the event before the upcall. Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-10-22iw_cxgb4: fix misuse of ep->ord for minimum ird calculationHariprasad S1-1/+1
When calculating the minimum ird in c4iw_accept_cr(), we need to always have a value of at least 1 if the RTR message is a 0B read. The code was incorrectly using ep->ord for this logic which was incorrectly adjusting the ird and causing incorrect ord/ird negotiation when using MPAv2 to negotiate these values. Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-02 22:57:24 +0300