summaryrefslogtreecommitdiff
path: root/drivers/iio
AgeCommit message (Collapse)AuthorFilesLines
2025-06-26iio: adc: ad7768-1: add support for Synchronization over SPIJonathan Santos1-2/+91
The synchronization method using GPIO requires the generated pulse to be truly synchronous with the base MCLK signal. When it is not possible to do that in hardware, the datasheet recommends using synchronization over SPI, where the generated pulse is already synchronous with MCLK. This requires the SYNC_OUT pin to be connected to the SYNC_IN pin. Use trigger-sources property to enable device synchronization over SPI and multi-device synchronization while replacing sync-in-gpios property. Reviewed-by: David Lechner <dlechner@baylibre.com> Signed-off-by: Jonathan Santos <Jonathan.Santos@analog.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://patch.msgid.link/05aea6d1551fce94f290d68f1dba548513e1632f.1749569957.git.Jonathan.Santos@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-06-26iio: adc: ad7768-1: add multiple scan types to support 16-bits modeJonathan Santos1-10/+64
When the device is configured to decimation x8, only possible in the sinc5 filter, output data is reduced to 16 bits in order to support 1 MHz of sampling frequency due to clock limitation. Use multiple scan types feature to enable the driver to switch scan type at runtime, making it possible to support both 24-bit and 16-bit resolution. Reviewed-by: Marcelo Schmitt <marcelo.schmitt@analog.com> Reviewed-by: David Lechner <dlechner@baylibre.com> Signed-off-by: Jonathan Santos <Jonathan.Santos@analog.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://patch.msgid.link/08780fd4a59885f1f250759ce655420bd1dbb383.1749569957.git.Jonathan.Santos@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-06-26iio: adc: ad7768-1: Add GPIO controller supportSergiu Cuciurean1-2/+138
The AD7768-1 has the ability to control other local hardware (such as gain stages),to power down other blocks in the signal chain, or read local status signals over the SPI interface. Add direct mode conditional locks in the GPIO callbacks to prevent register access when the device is in buffered mode. This change exports the AD7768-1's four GPIOs and makes them accessible at an upper layer. Reviewed-by: Marcelo Schmitt <marcelo.schmitt@analog.com> Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sergiu Cuciurean <sergiu.cuciurean@analog.com> Co-developed-by: Jonathan Santos <Jonathan.Santos@analog.com> Signed-off-by: Jonathan Santos <Jonathan.Santos@analog.com> Link: https://patch.msgid.link/8abca580f43cb31d7088d07a7414b5f7efe91ead.1749569957.git.Jonathan.Santos@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-06-26iio: adc: ad7768-1: add regulator to control VCM outputJonathan Santos2-0/+160
The VCM output voltage can be used as a common-mode voltage within the amplifier preconditioning circuits external to the AD7768-1. This change allows the user to configure VCM output using the regulator framework. Acked-by: Marcelo Schmitt <marcelo.schmitt@analog.com> Reviewed-by: David Lechner <dlechner@baylibre.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Jonathan Santos <Jonathan.Santos@analog.com> Link: https://patch.msgid.link/1f02312fdc4131168b194d59f4b1688dc68ea36e.1749569957.git.Jonathan.Santos@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-06-26iio: adc: stm32-adc: Use dev_fwnode()Jiri Slaby (SUSE)1-2/+1
irq_domain_create_simple() takes fwnode as the first argument. It can be extracted from the struct device using dev_fwnode() helper instead of using of_node with of_fwnode_handle(). So use the dev_fwnode() helper. Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org> Reviewed-by: David Lechner <dlechner@baylibre.com> Link: https://patch.msgid.link/20250612084627.217341-1-jirislaby@kernel.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-06-26iio: light: opt4060: convert to use maple tree register cachechuguangqing1-1/+1
The maple tree register cache is based on a much more modern data structure than the rbtree cache and makes optimisation choices which are probably more appropriate for modern systems than those made by the rbtree cache. Signed-off-by: chuguangqing <chuguangqing@inspur.com> Link: https://patch.msgid.link/20250611085838.4761-11-chuguangqing@inspur.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-06-26iio: light: ltr501: convert to use maple tree register cachechuguangqing1-1/+1
The maple tree register cache is based on a much more modern data structure than the rbtree cache and makes optimisation choices which are probably more appropriate for modern systems than those made by the rbtree cache. Signed-off-by: chuguangqing <chuguangqing@inspur.com> Link: https://patch.msgid.link/20250611085838.4761-10-chuguangqing@inspur.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-06-26iio: light: isl29028: convert to use maple tree register cachechuguangqing1-1/+1
The maple tree register cache is based on a much more modern data structure than the rbtree cache and makes optimisation choices which are probably more appropriate for modern systems than those made by the rbtree cache. Signed-off-by: chuguangqing <chuguangqing@inspur.com> Link: https://patch.msgid.link/20250611085838.4761-9-chuguangqing@inspur.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-06-26iio: imu: bno055: convert to use maple tree register cachechuguangqing1-1/+1
The maple tree register cache is based on a much more modern data structure than the rbtree cache and makes optimisation choices which are probably more appropriate for modern systems than those made by the rbtree cache. Signed-off-by: chuguangqing <chuguangqing@inspur.com> Link: https://patch.msgid.link/20250611085838.4761-8-chuguangqing@inspur.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-06-26iio: imu: icm42600: convert to use maple tree register cachechuguangqing1-2/+2
The maple tree register cache is based on a much more modern data structure than the rbtree cache and makes optimisation choices which are probably more appropriate for modern systems than those made by the rbtree cache. Signed-off-by: chuguangqing <chuguangqing@inspur.com> Acked-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com> Link: https://patch.msgid.link/20250611085838.4761-7-chuguangqing@inspur.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-06-26iio: health: afe4404: convert to use maple tree register cachechuguangqing1-1/+1
The maple tree register cache is based on a much more modern data structure than the rbtree cache and makes optimisation choices which are probably more appropriate for modern systems than those made by the rbtree cache. Signed-off-by: chuguangqing <chuguangqing@inspur.com> Link: https://patch.msgid.link/20250611085838.4761-6-chuguangqing@inspur.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-06-26iio: health: afe4403: convert to use maple tree register cachechuguangqing1-1/+1
The maple tree register cache is based on a much more modern data structure than the rbtree cache and makes optimisation choices which are probably more appropriate for modern systems than those made by the rbtree cache. Signed-off-by: chuguangqing <chuguangqing@inspur.com> Link: https://patch.msgid.link/20250611085838.4761-5-chuguangqing@inspur.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-06-26iio: dac: bd79703: convert to use maple tree register cachechuguangqing1-1/+1
The maple tree register cache is based on a much more modern data structure than the rbtree cache and makes optimisation choices which are probably more appropriate for modern systems than those made by the rbtree cache. Signed-off-by: chuguangqing <chuguangqing@inspur.com> Link: https://patch.msgid.link/20250611085838.4761-4-chuguangqing@inspur.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-06-26iio: dac: ad5380: convert to use maple tree register cachechuguangqing1-1/+1
The maple tree register cache is based on a much more modern data structure than the rbtree cache and makes optimisation choices which are probably more appropriate for modern systems than those made by the rbtree cache. Signed-off-by: chuguangqing <chuguangqing@inspur.com> Link: https://patch.msgid.link/20250611085838.4761-3-chuguangqing@inspur.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-06-26iio: chemical: bme680: convert to use maple tree register cachechuguangqing1-1/+1
The maple tree register cache is based on a much more modern data structure than the rbtree cache and makes optimisation choices which are probably more appropriate for modern systems than those made by the rbtree cache. Signed-off-by: chuguangqing <chuguangqing@inspur.com> Link: https://patch.msgid.link/20250611085838.4761-2-chuguangqing@inspur.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-06-26iio: adc: ad7173: check return value of spi_setup()David Lechner1-1/+3
Check the return value of spi_setup() and propagate the error in the ad7173_probe() function. This is unlikely to happen since virtually every SPI controller supports SPI_MODE_3, but still always a good idea to check the return value. Signed-off-by: David Lechner <dlechner@baylibre.com> Link: https://patch.msgid.link/20250611-iio-adc-ad7173-check-spi_setup-return-v1-1-4d6f9ef0a2e4@baylibre.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-06-26iio: trigger: stm32-lptimer: Fix build warnings about export.hAntonio Borneo1-0/+1
After commit a934a57a42f6 ("scripts/misc-check: check missing #include <linux/export.h> when W=1") and commit 7d95680d64ac ("scripts/misc-check: check unnecessary #include <linux/export.h> when W=1") we get the build warning with W=1: drivers/iio/trigger/stm32-lptimer-trigger.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing Fix it. Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com> Acked-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Link: https://patch.msgid.link/20250610124855.269158-5-antonio.borneo@foss.st.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-06-26iio: trigger: stm32-timer: Fix build warnings about export.hAntonio Borneo1-0/+1
After commit a934a57a42f6 ("scripts/misc-check: check missing #include <linux/export.h> when W=1") and commit 7d95680d64ac ("scripts/misc-check: check unnecessary #include <linux/export.h> when W=1") we get the build warning with W=1: drivers/iio/trigger/stm32-timer-trigger.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing Fix it. Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com> Acked-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Link: https://patch.msgid.link/20250610124855.269158-4-antonio.borneo@foss.st.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-06-26iio: adc: stm32-dfsdm: Fix build warnings about export.hAntonio Borneo2-0/+2
After commit a934a57a42f6 ("scripts/misc-check: check missing #include <linux/export.h> when W=1") and commit 7d95680d64ac ("scripts/misc-check: check unnecessary #include <linux/export.h> when W=1") we get the build warnings with W=1: drivers/iio/adc/stm32-dfsdm-adc.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing drivers/iio/adc/stm32-dfsdm-core.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing Fix them. Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com> Acked-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Link: https://patch.msgid.link/20250610124855.269158-3-antonio.borneo@foss.st.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-06-26iio: potentiometer: Drop unused export.h includesJonathan Cameron2-2/+0
Resolves: warning: EXPORT_SYMBOL() is not used, but #include <linux/export.h> is present Reviewed-by: Andy Shevchenko <andy@kernel.org> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Link: https://patch.msgid.link/20250609070616.3923709-2-jic23@kernel.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-06-26iio: adc: ad7405: add ad7405 driverPop Ioan Daniel3-0/+264
Add support for the AD7405/ADUM770x, a high performance isolated ADC, 1-channel, 16-bit with a second-order Σ-Δ modulator that converts an analog input signal into a high speed, single-bit data stream. Signed-off-by: Pop Ioan Daniel <pop.ioan-daniel@analog.com> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Link: https://patch.msgid.link/20250605150948.3091827-6-pop.ioan-daniel@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-06-26iio: adc: adi-axi-adc: add axi_adc_oversampling_ratio_setPop Ioan Daniel1-0/+17
Add support for setting decimation rate. Reviewed-by: David Lechner <dlechner@baylibre.com> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Signed-off-by: Pop Ioan Daniel <pop.ioan-daniel@analog.com> Link: https://patch.msgid.link/20250605150948.3091827-4-pop.ioan-daniel@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-06-26iio: backend: update iio_backend_oversampling_ratio_setPop Ioan Daniel3-3/+6
Add chan parameter to iio_backend_oversampling_ratio_set() to allow for contexts where the channel must be specified. Modify all existing users. Reviewed-by: David Lechner <dlechner@baylibre.com> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Signed-off-by: Pop Ioan Daniel <pop.ioan-daniel@analog.com> Link: https://patch.msgid.link/20250605150948.3091827-3-pop.ioan-daniel@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-06-26iio: adc: ad4851: ad4851_set_oversampling_ratio parameters updatePop Ioan Daniel1-2/+1
Remove chan parameter from ad4851_set_oversampling_ratio parameters list because the parameter is not used. Reviewed-by: David Lechner <dlechner@baylibre.com> Signed-off-by: Pop Ioan Daniel <pop.ioan-daniel@analog.com> Link: https://patch.msgid.link/20250605150948.3091827-2-pop.ioan-daniel@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-06-26iio: accel: adxl313: add debug registerLothar Rubusch1-0/+11
Add IIO debug register for general sensor debugging. Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com> Link: https://patch.msgid.link/20250601172139.59156-2-l.rubusch@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-06-26iio: cros_ec_sensors: add cros_ec_activity driverGwendal Grignou4-0/+327
ChromeOS EC can report activity information derived from the accelerometer: - Reports on-body/off-body as a proximity event. - Reports significant motion as an activity event. This new sensor is a virtual sensor, included only when the EC firmware is compiled with the appropriate module. Signed-off-by: Gwendal Grignou <gwendal@google.com> Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org> Link: https://patch.msgid.link/20250604053903.1376465-1-gwendal@google.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-06-26iio: adc: ti-ads131e08: Fix spelling mistake "tweek" -> "tweak"Colin Ian King1-5/+5
There is a spelling mistake in variable tweek_offset and in comment blocks. Fix these. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Reviewed-by: Andy Shevchenko <andy@kernel.org> Link: https://patch.msgid.link/20250603165706.126031-1-colin.i.king@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-06-17sysfs: treewide: switch back to attribute_group::bin_attrsThomas Weißschuh1-1/+1
The normal bin_attrs field can now handle const pointers. This makes the _new variant unnecessary. Switch all users back. Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Link: https://lore.kernel.org/r/20250530-sysfs-const-bin_attr-final-v3-4-724bfcf05b99@weissschuh.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-09iio: adc: ad7606: add gain calibration supportAngelo Dureghello2-0/+44
Add gain calibration support, using resistor values set on devicetree, values to be set accordingly with ADC external RFilter, as explained in the ad7606c-16 datasheet, rev0, page 37. Usage example in the fdt yaml documentation. Signed-off-by: Angelo Dureghello <adureghello@baylibre.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://patch.msgid.link/20250606-wip-bl-ad7606-calibration-v9-7-6e014a1f92a2@baylibre.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-06-09iio: adc: ad7606: rename chan_scale to a more generic chan_infoAngelo Dureghello2-75/+75
Non functional, renaming chan-related chan_scale structure to a more generic chan_info, to host other chan specific settings, not just scale-related. Signed-off-by: Angelo Dureghello <adureghello@baylibre.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://patch.msgid.link/20250606-wip-bl-ad7606-calibration-v9-6-6e014a1f92a2@baylibre.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-06-09iio: adc: ad7606: exit for invalid fdt dt_schema propertiesAngelo Dureghello1-6/+4
Fix ad7606_get_chan_config() fdt parsing function to exit for error in case of invalid dt_schema values. Idea is to not proceed when there are values that are not allowed under the dt_schema. Signed-off-by: Angelo Dureghello <adureghello@baylibre.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://patch.msgid.link/20250606-wip-bl-ad7606-calibration-v9-5-6e014a1f92a2@baylibre.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-06-09iio: adc: ad7606: add offset and phase calibration supportAngelo Dureghello2-0/+169
Add support for offset and phase calibration, only for devices that support software mode, that are: ad7606b ad7606c-16 ad7606c-18 Tested-by: David Lechner <dlechner@baylibre.com> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Signed-off-by: Angelo Dureghello <adureghello@baylibre.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://patch.msgid.link/20250606-wip-bl-ad7606-calibration-v9-3-6e014a1f92a2@baylibre.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-06-09iio: core: add ADC delay calibration definitionAngelo Dureghello1-0/+1
ADCs as ad7606 implement a phase calibration as a delay. Add such definition, needed for ad7606. Signed-off-by: Angelo Dureghello <adureghello@baylibre.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://patch.msgid.link/20250606-wip-bl-ad7606-calibration-v9-2-6e014a1f92a2@baylibre.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-06-09iio: adc: ad7768-1: Ensure SYNC_IN pulse minimum timing requirementJonathan Santos1-4/+19
The SYNC_IN pulse width must be at least 1.5 x Tmclk, corresponding to ~2.5 µs at the lowest supported MCLK frequency. Add a 3 µs delay to ensure reliable synchronization timing even for the worst-case scenario. Signed-off-by: Jonathan Santos <Jonathan.Santos@analog.com> Reviewed-by: David Lechner <dlechner@baylibre.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://patch.msgid.link/d3ee92a533cd1207cf5c5cc4d7bdbb5c6c267f68.1749063024.git.Jonathan.Santos@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-06-09iio: bmi160: suspend and resume triggering on relevant pm operationsDenis Benato4-0/+25
Prevent triggers from stop working after the device has entered sleep: use iio_device_suspend_triggering and iio_device_resume_triggering helpers. Closes: https://lore.kernel.org/all/31d7f7aa-e834-4fd0-a66a-e0ff528425dc@gmail.com Signed-off-by: Denis Benato <benato.denis96@gmail.com> Link: https://patch.msgid.link/20250525142530.71955-3-benato.denis96@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-06-09iio: bmi270: suspend and resume triggering on relevant pm operationsDenis Benato4-0/+26
Prevent triggers from stop working after the device has entered sleep: use iio_device_suspend_triggering and iio_device_resume_triggering helpers. Closes: https://lore.kernel.org/all/31d7f7aa-e834-4fd0-a66a-e0ff528425dc@gmail.com Signed-off-by: Denis Benato <benato.denis96@gmail.com> Tested-by: Justin Weiss <justin@justinweiss.com> Link: https://patch.msgid.link/20250525142530.71955-2-benato.denis96@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-06-09iio: adc: ad7606: add enabling of optional Vrefin voltageAngelo Dureghello1-0/+5
Add optional refin voltage enabling. The property "refin-supply" is already available and optional in the current fdt dt_schema. Note that the driver does not need to take any actions if the supply is not present because a pin strap is used to change the behavior of the device if an external reference is connected. Signed-off-by: Angelo Dureghello <adureghello@baylibre.com> Link: https://patch.msgid.link/20250530-wip-bl-ad7606-reference-voltages-v2-2-d5e1ad7e6f14@baylibre.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-06-09iio: adc: ad7606: enable Vdrive power supplyAngelo Dureghello1-0/+5
Enable Vdrive power supply. The "vdrive-supply" property is mandatory, already declared in fdt dt_schema. Signed-off-by: Angelo Dureghello <adureghello@baylibre.com> Link: https://patch.msgid.link/20250530-wip-bl-ad7606-reference-voltages-v2-1-d5e1ad7e6f14@baylibre.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-06-09iio: adc: ad7476: Support ROHM BU79100GMatti Vaittinen1-0/+7
ROHM BU79100G is a 12-bit, single channel ADC. From the software point of view it is identical to the TI's ADS7866. Support reading ADC measurements using the ad7476.c Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com> Link: https://patch.msgid.link/aDk2qNE9LTVnfAFM@mva-rohm Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-06-09iio: Remove unused macro definition for driver and IRQ nameWaqar Hameed3-7/+0
These macro definitions are completely unused. Remove them. Signed-off-by: Waqar Hameed <waqar.hameed@axis.com> Link: https://patch.msgid.link/0dec4fe7b2bdc90d06163ac75a53b97d4ae31c21.1748356671.git.waqar.hameed@axis.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-06-09iio: Remove single use of macro definition for regmap nameWaqar Hameed14-30/+14
There is really no reason for having the `regmap` name as a macro definition if it is only used once directly in `struct regmap_config`. It is also more readable this way. Remove these macro definitions and instead use the string literal directly. Signed-off-by: Waqar Hameed <waqar.hameed@axis.com> Link: https://patch.msgid.link/3a8572de8316c7d2746c2ccea8c478f594221319.1748356671.git.waqar.hameed@axis.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-06-09iio: Remove single use of macro definition for IRQ nameWaqar Hameed15-34/+15
There is really no reason for having the IRQ name as a macro definition if it is only used once (often in functions requesting the IRQ). It is also more readable this way. Remove these macro definitions and instead use the string literal directly. Signed-off-by: Waqar Hameed <waqar.hameed@axis.com> Link: https://patch.msgid.link/3dc06cb2a83d292c50d9758643aad37ca5c6d95c.1748356671.git.waqar.hameed@axis.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-06-09iio: Remove single use of macro definition for driver nameWaqar Hameed13-35/+13
There is really no reason for having the driver name as a macro definition if it is only used once (often as `.name` in `struct device_driver`). It is also more readable this way. Remove these macro definitions and instead use the string literal directly. Signed-off-by: Waqar Hameed <waqar.hameed@axis.com> Link: https://patch.msgid.link/4840779a167e027b8be77c82f7a4f27210ef084a.1748356671.git.waqar.hameed@axis.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-06-09iio: imu: inv_mpu6050: refactor aux read/write to use shared xfer logicIsabella Caselli1-36/+20
Refactors inv_mpu_aux_read() and inv_mpu_aux_write() to extract the common I2C transfer sequence into inv_mpu_i2c_master_xfer(), which now handles starting and stopping the I2C master, waiting for completion, disabling SLV0, and checking for NACK errors. This refactoring removes code duplication and improves maintainability. No functional changes are intended. Signed-off-by: Isabella Caselli <bellacaselli20@gmail.com> Co-developed-by: Rodrigo Michelassi <rodrigo.michelassi@usp.br> Signed-off-by: Rodrigo Michelassi <rodrigo.michelassi@usp.br> Acked-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com> Link: https://patch.msgid.link/20250507184539.54658-1-bellacaselli20@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-06-09iio: buffer: Fix checkpatch.pl warningGyeyoung Baek1-1/+1
Remove the following trivial warning: "WARNING: Block comments should align the * on each line" Signed-off-by: Gyeyoung Baek <gye976@gmail.com> Link: https://patch.msgid.link/20250519-timestamp-v1-1-fcb4f6c2721c@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-06-09iio: amplifiers: ada4250: use DMA-safe memory for regmap_bulk_read()David Lechner1-5/+5
Use DMA-safe memory instead of stack-allocated memory for the call to regmap_bulk_read() in the ada4250_init() function as this could be used directly by a SPI controller. Also remove unnecessary use of get_unaligned_le16() and explicitly include linux/types.h e.g. for __le16 while we are fixing this up. Note this is DMA issue does not appear to be an actual bug due to internals of the regmap SPI implementation. However, for IIO we are following guidance that we should not make that assumption. Signed-off-by: David Lechner <dlechner@baylibre.com> Link: https://patch.msgid.link/20250418-iio-amplifiers-ada4250-simplify-data-buffer-in-init-v1-1-7e7bd6dad423@baylibre.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-06-09iio: accel: adxl345: add g-range configurationLothar Rubusch1-3/+79
Introduce a mechanism to be able to configure and work with the available g-ranges keeping the precision of 13 digits. Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com> Link: https://patch.msgid.link/20250510224405.17910-3-l.rubusch@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-06-09iio: accel: adxl345: extend sample frequency adjustmentsLothar Rubusch2-34/+118
Introduce enums and functions to work with the sample frequency adjustments. Let the sample frequency adjust via IIO and configure a reasonable default. Replace the old static sample frequency handling. During adjustment of bw registers, measuring is disabled and afterwards enabled again. Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com> Link: https://patch.msgid.link/20250510224405.17910-2-l.rubusch@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-06-09iio: dac: adi-axi-dac: use unique bus free checkAngelo Dureghello1-20/+22
Use a unique function for the bus free check by polling, to reduce duplicated code. An error is always thrown in case of timeout. Signed-off-by: Angelo Dureghello <adureghello@baylibre.com> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Link: https://patch.msgid.link/20250523-ad3552r-fix-bus-read-v3-2-310e726dd964@baylibre.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-06-09iio: adc: ad4080: add driver supportAntoniu Miclaus3-0/+634
Add support for AD4080 high-speed, low noise, low distortion, 20-bit, Easy Drive, successive approximation register (SAR) analog-to-digital converter (ADC). Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com> Link: https://patch.msgid.link/20250516082630.8236-10-antoniu.miclaus@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
generated by cgit v1.2.3 (git 2.39.0) at 2026-05-16 16:36:45 +0300