summaryrefslogtreecommitdiff
path: root/drivers/iio
AgeCommit message (Collapse)AuthorFilesLines
2014-08-07iio: accel: BMC150 accel supportSrinivas Pandruvada3-0/+1321
This change implements BMC150 accelerometer driver. A BMC150 package consist of a compass and an accelerometer. This driver only implements accelerometer part. Spec downloaded from: http://ae-bst.resource.bosch.com/media/products/dokumente/bmc150/BST-BMC150-DS000-03.pdf This sensor chip supports many advanced features, but this driver implements minimum feature set which is a must to be useful. This driver can be enhanced incrementally. If the sensor vendor wants to update full featured version, they can substitute or enhance this driver when they get chance. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-08-07iio: accel: kxcjk-1013: Set adjustable rangeSrinivas Pandruvada1-5/+95
This chip can support 3 different ranges. Allowing range specification. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-08-07iio: accel: kxcjk-1013: support runtime pmSrinivas Pandruvada1-50/+156
In an effort to improve raw read performance and at the same time enter low power state at every possible chance. For raw reads, it will keep the system powered on for a default or user specified time, via autosuspend_delay attribute of device power. This will help read multiple samples without power on/off sequence. For triggers it will keep the system on till, requested to be turned off by trigger state by utilizing run time PM usage counters. When runtime pm is not enabled, then it keeps the chip in operation mode always. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-08-07iio: fix error return codeJulia Lawall1-2/+6
Convert a zero return value on error to a negative one, as returned elsewhere in the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-08-05Merge tag 'staging-3.17-rc1' of ↵Linus Torvalds61-759/+4717
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging driver updates from Greg KH: "Here's the big pull request for the staging driver tree for 3.17-rc1. Lots of things in here, over 2000 patches, but the best part is this: 1480 files changed, 39070 insertions(+), 254659 deletions(-) Thanks to the great work of Kristina Martšenko, 14 different staging drivers have been removed from the tree as they were obsolete and no one was willing to work on cleaning them up. Other than the driver removals, loads of cleanups are in here (comedi, lustre, etc.) as well as the usual IIO driver updates and additions. All of this has been in the linux-next tree for a while" * tag 'staging-3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (2199 commits) staging: comedi: addi_apci_1564: remove diagnostic interrupt support code staging: comedi: addi_apci_1564: add subdevice to check diagnostic status staging: wlan-ng: coding style problem fix staging: wlan-ng: fixing coding style problems staging: comedi: ii_pci20kc: request and ioremap memory staging: lustre: bitwise vs logical typo staging: dgnc: Remove unneeded dgnc_trace.c and dgnc_trace.h staging: dgnc: rephrase comment staging: comedi: ni_tio: remove some dead code staging: rtl8723au: Fix static symbol sparse warning staging: rtl8723au: usb_dvobj_init(): Remove unused variable 'pdev_desc' staging: rtl8723au: Do not duplicate kernel provided USB macros staging: rtl8723au: Remove never set struct pwrctrl_priv.bHWPowerdown staging: rtl8723au: Remove two never set variables staging: rtl8723au: RSSI_test is never set staging:r8190: coding style: Fixed checkpatch reported Error staging:r8180: coding style: Fixed too long lines staging:r8180: coding style: Fixed commenting style staging: lustre: ptlrpc: lproc_ptlrpc.c - fix dereferenceing user space buffer staging: lustre: ldlm: ldlm_resource.c - fix dereferenceing user space buffer ...
2014-08-01iio: buffer: Coalesce adjacent demux table entriesLars-Peter Clausen1-19/+28
When copying multiple multiple samples that are adjacent in both the source as well as the destination buffer, instead of creating a new demux table entry for each sample just increase the length of the previous entry by the size of the new sample. This makes the demuxing process slightly more efficient. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-07-27iio: buffer: Use roundup() instead of open-coding itLars-Peter Clausen1-11/+5
Makes the code slightly shorter and a bit easier to understand. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-07-27iio: add support of the max5821Philippe Reynes3-0/+414
Signed-off-by: Philippe Reynes <tremyfr@yahoo.fr> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-07-27iio: hid-sensor-magn-3d: Fix build warningReyad Attiyat1-5/+2
Fix build warning, sizeof() called on dynamically sized pointer, by removing the call and the dependent function parameter. It is not needed or used in this driver, when pushing values to an iio buffer. Changes from v1 - Fix mistake in varible name Signed-off-by: Reyad Attiyat <reyad.attiyat@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-07-25Merge tag 'iio-for-3.17d' of ↵Greg Kroah-Hartman5-352/+731
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: Fourth round of IIO new drivers, functionality and cleanups for the 3.17 cycle New functionality * A new modifier to indicate that a rotation is relative to either true or magnetic north. This is to be used by some magnetometers that provide data in this way. * hid magnetometer now supports output rotations from various variants on North * HMC5843 driver converted to regmap and reworked to allow easy support of other similar devices. Support for HMC5983 added via both i2c and SPI. * Rework of Exynos driver to simplify extension to support more devices. * Addition of support for the Exynos3250 ADC (which requires an additional clock) Support for quite a few more devices on its way. Cleanups * ad7997 - a number of cleanups and tweaks to how the events are controlled to make it more intuitive. * kxcjk - cleanups and minor fixes for this new driver.
2014-07-24iio: adc: exynos_adc: Control special clock of ADC to support Exynos3250 ADCChanwoo Choi1-8/+103
This patch control special clock for ADC in Exynos series's FSYS block. If special clock of ADC is registerd on clock list of common clk framework, Exynos ADC drvier have to control this clock. Exynos3250/Exynos4/Exynos5 has 'adc' clock as following: - 'adc' clock: bus clock for ADC Exynos3250 has additional 'sclk_adc' clock as following: - 'sclk_adc' clock: special clock for ADC which provide clock to internal ADC Exynos 4210/4212/4412 and Exynos5250/5420 has not included 'sclk_adc' clock in FSYS_BLK. But, Exynos3250 based on Cortex-A7 has only included 'sclk_adc' clock in FSYS_BLK. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-07-24iio: adc: exynos_adc: Add exynos_adc_data structure to improve readabilityChanwoo Choi1-79/+147
This patchset add 'exynos_adc_data' structure which includes some functions to control ADC operation and specific data according to ADC version (v1 or v2). Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-07-20iio:kxcjk-1013: Fix endianness in scan_typePeter Meerwald1-1/+1
driver uses i2c_smbus_read_word_data() to the data in the trigger handler and hence already does endianness conversion; the I2C chip has data in little endian, but the value is provides in CPU endianness Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-07-20iio:bma180: Missing check for frequency fractional partPeter Meerwald1-0/+2
val2 should be zero This will make no difference for correct inputs but will reject incorrect ones with a decimal part in the value written to the sysfs interface. Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Cc: Oleksandr Kravchenko <o.v.kravchenko@globallogic.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org> Cc: Stable@vger.kernel.org
2014-07-20iio:bma180: Fix scale factors to report correct acceleration unitsPeter Meerwald1-3/+3
The userspace interface for acceleration sensors is documented as using m/s^2 units [Documentation/ABI/testing/sysfs-bus-iio] The fullscale raw values for the BMA80 corresponds to -/+ 1, 1.5, 2, etc G depending on the selected mode. The scale table was converting to G rather than m/s^2. Change the scaling table to match the documented interface. See commit 71702e6e, iio: mma8452: Use correct acceleration units, for a related fix. Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Cc: Oleksandr Kravchenko <o.v.kravchenko@globallogic.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org> Cc: Stable@vger.kernel.org
2014-07-20iio: accel: kxcjk-1013: Increment ref counter for indio_dev->trigSrinivas Pandruvada1-0/+1
Assigning indio_dev->trig is not a good idea, as this can result in wrong reference count for trigger device. If assigned, it is better to increment reference counter by calling iio_trigger_get. Refer to http://www.spinics.net/lists/linux-iio/msg13669.html for discussion with Jonathan. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-07-20iio: accel: kxcjk-1013: Use try_reenable to ack intrSrinivas Pandruvada1-17/+16
This chip needs explicit interrupt ack, introducing try_reenable callback. Also removed separate function to ack interrupt as this doesn't add any value. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-07-20iio: accel: kxcjk-1013: Fix setting frequencySrinivas Pandruvada1-1/+1
Fix issue with setting of 12.5 and 6.25 HZ. The match of val2 fails. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-07-20iio: buffer: Fix demux table creationLars-Peter Clausen1-1/+1
When creating the demux table we need to iterate over the selected scan mask for the buffer to get the samples which should be copied to destination buffer. Right now the code uses the mask which contains all active channels, which means the demux table contains entries which causes it to copy all the samples from source to destination buffer one by one without doing any demuxing. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org> Cc: Stable@vger.kernel.org
2014-07-20iio: hid-sensor-magn-3d: Add support for rotation from northReyad Attiyat1-1/+52
Add the HID usage attribute ID's and IIO channel info for rotation from north support. Signed-off-by: Reyad Attiyat <reyad.attiyat@gmail.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-07-20iio: hid-sensor-magn-3d: Scan for usage attributes before setting up iio ↵Reyad Attiyat1-44/+105
channels Scan for and count the HID usage attributes supported by the driver. This allows for the driver to only setup the IIO channels for the sensor usages present in the HID USB reports. Changes from v5 -Fixed kernel panic from invalid pointer dereference -Fixed variable assignment style Signed-off-by: Reyad Attiyat <reyad.attiyat@gmail.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-07-20iio: types: Added support for rotation from north usage attributesReyad Attiyat1-0/+4
Added the rotation from north usage attributes to the iio modifier enum and to the iio modifier names array. Signed-off-by: Reyad Attiyat <reyad.attiyat@gmail.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-07-14Merge 3.16-rc5 into staging-nextGreg Kroah-Hartman8-32/+23
We want the fixes in -rc5 in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-14iio:adc:ad799x: Allow writing of event configPeter Meerwald1-0/+34
Allows explicity enabling of events Previously, events were always reported as enabled, but actually only implicitly enabled when updating the buffer scan mode Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-07-14iio:adc:ad799x: Return more meaningful event enabled statePeter Meerwald1-1/+9
only report an event as enabled if it actually is enabled Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-07-14iio:adc:ad799x: Set conversion channels and rename ad7997_8_update_scan_mode()Peter Meerwald1-5/+9
rename since function is used by all chips with ALERT pin, not just ad7997/8 Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-07-14iio:adc:ad799x: Write default config on probe and reset alert status on probePeter Meerwald1-6/+13
writing ALERT_EN and BUSY_ALERT to the chip config register clears pending alerts, BUSY_ALERT is cleared when reading back the register Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-07-14iio:adc:ad799x: Add helper function to read/write config registerPeter Meerwald1-0/+24
16-bit on ad7997/ad7998, 8-bit elsewhere Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-07-14iio:adc:ad799x: Make chan_spec const in ad799x_chip_config structPeter Meerwald1-1/+1
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-07-14iio:adc:ad799x: Only expose event interface when IRQ is availablePeter Meerwald1-86/+179
an IRQ is necessary to handle the ALERT condition; without IRQ, the IIO event interface serves no purpose Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-07-14iio:adc:ad799x: Use BIT() and GENMASK()Peter Meerwald1-16/+15
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-07-14iio:adc:ad799x: Save some lines in ad7997_8_update_scan_mode() exit handlingPeter Meerwald1-3/+1
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-07-14iio:adc:ad799x: Drop I2C access helper functionsPeter Meerwald1-93/+26
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-07-13Merge tag 'iio-for-3.17c' of ↵Greg Kroah-Hartman29-307/+1779
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: 3rd round of IIO new drivers, cleanups and functionality for the 3.17 cycle. New drivers * isl29125 digital color light sensor driver * TAOS/AMS tcs3414 digital color sensor Staging graduation * ad7291 ADC driver. New functionality * st_sensors - device tree support and bindings * mma8452 - device tree support Cleanups * Drop redundant variables in a number of drivers. * Reorder a structure definition to ealy wiht a warning about static not being at the beginning in the hid-sensors driver. * Switch a few more drivers away from using explicit sampling_frequency attribute to providing this through the core. * Make hid_sensor_get_reporting_interval static as only used within a single file. * Drop a redundant check for negative values in an unsigned variable from ad9832 * Drop some duplicate case labels in the event monitor example code. * Use devm_ioremap_resource to simplify error handling. * Use devm_kzalloc within the blackfin timer driver to simplify error handling and removal. * A number of cleanups of the ad7291 from Hartmut Knaack in response to a patch moving it out of staging. * Core support for the period info element about events. It has been in the abi for a while, but not added until now to the newer handling of information related to events. * Add HAS_IOMEM dependency to mxs_lradc to avoid build issues when testing enabled.
2014-07-13iio: mma8452: add DT supportMartin Fuzzey1-0/+6
Allow the mma8452 to be described in the device tree. Since no device specific binding attributes exist the trivial I2C binding is sufficient to describe the compatible string. Signed-off-by: Martin Fuzzey <mfuzzey@parkeon.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-07-12iio: mma8452: Use correct acceleration units.Martin Fuzzey1-1/+7
The userspace interface for acceleration sensors is documented as using m/s^2 units [Documentation/ABI/testing/sysfs-bus-iio] The fullscale raw value for the mma8452 (-2048) corresponds to -2G, -4G or -8G depending on the seleted mode. The scale table was converting to G rather than m/s^2. Change the scaling table to match the documented interface. Signed-off-by: Martin Fuzzey <mfuzzey@parkeon.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org> Cc: stable@vger.kernel.org
2014-07-12iio: core : events ABI for specifying periodSrinivas Pandruvada1-0/+1
The iio sysfs ABI defines a way to specify period for roc and thresholds. What: /sys/.../events/in_accel_x_thresh_rising_period What: /sys/.../events/in_accel_x_thresh_falling_period what: /sys/.../events/in_accel_x_roc_rising_period What: /sys/.../events/in_accel_x_roc_falling_period But there is no way to add period with the current event info enum. Added IIO_EV_INFO_PERIOD and corresponding string. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-07-12iio:core: Handle error when mask type is not separateSrinivas Pandruvada1-0/+3
When event spec is shared by multiple channels, which has definition for mask_shared_by_type, iio_device_register_eventset fails. For example: static const struct iio_event_spec iio_dummy_events[] = { { .type = IIO_EV_TYPE_THRESH, .dir = IIO_EV_DIR_RISING, .mask_separate = BIT(IIO_EV_INFO_ENABLE), .mask_shared_by_type = BIT(IIO_EV_INFO_VALUE), }, { .type = IIO_EV_TYPE_THRESH, .dir = IIO_EV_DIR_FALLING, .mask_separate = BIT(IIO_EV_INFO_ENABLE),a .mask_shared_by_type = BIT(IIO_EV_INFO_VALUE), } }; If two channels use this event spec, this will result in error. This change handles EBUSY error similar to iio_device_add_info_mask_type(). Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org> Cc: Stable@vger.kernel.org
2014-07-12iio: st_sensors: add devicetree probing supportLinus Walleij5-0/+166
The I2C devices that make up the STMicroelectronics MEMS sensors may be sneakily enabled by cleverly giving the device node the same name as a string match from the platform device ID table. However the right method is to use the compatible string. On detection, the ST sensors use the ID string to probe and instatiate the right sensor driver, so pass the kernel-internal ID string in the .data field of the OF match table, and set the I2C client name to this name when a compatible match is used. This avoids having misc Linux-specific strings floating around in the device tree. Cc: Lee Jones <lee.jones@linaro.org> Cc: Denis CIOCCA <denis.ciocca@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-07-09iio: ti_am335x_adc: Fix: Use same step id at FIFOs both endsJan Kardell1-1/+1
Since AI lines could be selected at will (linux-3.11) the sending and receiving ends of the FIFO does not agree about what step is used for a line. It only works if the last lines are used, like 5,6,7, and fails if ie 2,4,6 is selected in DT. Signed-off-by: Jan Kardell <jan.kardell@telliq.com> Tested-by: Zubair Lutfullah <zubair.lutfullah@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org> Cc: stable@vger.kernel.org
2014-07-09staging:iio:ad7291: Move out of stagingLars-Peter Clausen3-0/+596
The ad7291 driver is in a reasonable shape. It does not use non-standard API/ABI and there are no major style issues with the driver. So this patch moves it out of staging. There is one small warning from checkpatch which is also fixed in this patch. The patch also sorts the #include directives in alphabetical order. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-07-08Merge 3.16-rc4 into staging-nextGreg Kroah-Hartman2-4/+10
We want the staging tree fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-07iio: hid-sensors: make hid_sensor_get_reporting_interval staticDaniel Baluta1-0/+1
This fixes the following sparse warning: CHECK drivers/iio/common/hid-sensors/hid-sensor-attributes.c drivers/iio/common/hid-sensors/hid-sensor-attributes.c:346:5: warning: symbol 'hid_sensor_get_reporting_interval' was not declared. Should it be static? Signed-off-by: Daniel Baluta <daniel.baluta@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-07-07iio: st_sensors: get platform data from device treeLinus Walleij1-1/+34
Currently the STMicroelectronics sensors only support one single platform data item: configuration of the DRDY (data ready) pin for a particular design. Augment the core to prioritize and take this information from the device tree if the parent device has an assigned device node, else fall back to passed in platform data (usually the default data). Cc: Lee Jones <lee.jones@linaro.org> Cc: Denis CIOCCA <denis.ciocca@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-07-07iio: imu: adis16480 switch sampling frequency attr to core supportJonathan Cameron1-60/+22
By using the info_mask_shared_by_all element of the channel spec, access to the sampling frequency becomes available to in kernel users of the driver. It also shortens and simplifies the code. Signed-off-by: Jonathan Cameron <jic23@kernel.org> Reviewed-by: Hartmut Knaack <knaack.h@gmx.de> Acked-by: Lars-Peter Clausen <lars@metafoo.de>
2014-07-07iio: imu: adis16400 switch sampling frequency attr to core support.Jonathan Cameron1-53/+25
By using the info_mask_shared_by_all element of the channel spec, access to the sampling frequency becomes available to in kernel users of the driver. It also shortens and simplifies the code. Signed-off-by: Jonathan Cameron <jic23@kernel.org> Reviewed-by: Hartmut Knaack <knaack.h@gmx.de> Acked-by: Lars-Peter Clausen <lars@metafoo.de>
2014-07-07iio: adis: Switch sampling frequency attr to core support.Jonathan Cameron1-78/+46
By using the info_mask_shared_by_all element of the channel spec, acce to the sampling frequency becomes available to in kernel users of the driver. It also shortens and simplifies the code. This particular conversion was made more complicated by the shared library and the fact that a number of the drivers do not actually have support for setting or reading the sampling frequency. The hardware, in those cases investigated supports it. It's just never been implemented. Signed-off-by: Jonathan Cameron <jic23@kernel.org> Reviewed-by: Hartmut Knaack <knaack.h@gmx.de> Acked-by: Lars-Peter Clausen <lars@metafoo.de>
2014-07-07iio: gyro: itg3200 switch sampling frequency attr to core support.Jonathan Cameron1-58/+43
By using the info_mask_shared_by_all element of the channel spec, access to the sampling frequency becomes available to in kernel users of the driver. It also shortens and simplifies the code a little. Signed-off-by: Jonathan Cameron <jic23@kernel.org> Reviewed-by: Hartmut Knaack <knaack.h@gmx.de> Cc: Manuel Stahl <manuel.stahl@iis.fraunhofer.de> Cc: Thorsten Nowak <thorsten.nowak@iis.fraunhofer.de> Cc: Christian Strobel <christian.strobel@iis.fraunhofer.de>
2014-07-07iio:st sensors: remove custom sampling frequence attribute in favour of core ↵Jonathan Cameron5-37/+55
support. This allows in kernel client drivers to access this Signed-off-by: Jonathan Cameron <jic23@kernel.org> Cc: Denis Ciocca <denis.ciocca@st.com> Reviewed-by: Hartmut Knaack <knaack.h@gmx.de>
2014-07-07iio: Add driver for AMS/TAOS tcs3414 digital color sensorPeter Meerwald3-0/+418
16-bit digital color sensor with red, green, blue and clear channel datasheet: http://ams.com/eng/content/download/250258/975997/TCS3414_Datasheet_EN_v1.pdf Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-05 01:26:30 +0300