| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the large set of char/misc and other driver subsystem changes
for 6.2-rc1. Nothing earth-shattering in here at all, just a lot of
new driver development and minor fixes.
Highlights include:
- fastrpc driver updates
- iio new drivers and updates
- habanalabs driver updates for new hardware and features
- slimbus driver updates
- speakup module parameters added to aid in boot time configuration
- i2c probe_new conversions for lots of different drivers
- other small driver fixes and additions
One semi-interesting change in here is the increase of the number of
misc dynamic minors available to 1048448 to handle new huge-cpu
systems.
All of these have been in linux-next for a while with no reported
problems"
* tag 'char-misc-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (521 commits)
extcon: usbc-tusb320: Convert to i2c's .probe_new()
extcon: rt8973: Convert to i2c's .probe_new()
extcon: fsa9480: Convert to i2c's .probe_new()
extcon: max77843: Replace irqchip mask_invert with unmask_base
chardev: fix error handling in cdev_device_add()
mcb: mcb-parse: fix error handing in chameleon_parse_gdd()
drivers: mcb: fix resource leak in mcb_probe()
coresight: etm4x: fix repeated words in comments
coresight: cti: Fix null pointer error on CTI init before ETM
coresight: trbe: remove cpuhp instance node before remove cpuhp state
counter: stm32-lptimer-cnt: fix the check on arr and cmp registers update
misc: fastrpc: Add dma_mask to fastrpc_channel_ctx
misc: fastrpc: Add mmap request assigning for static PD pool
misc: fastrpc: Safekeep mmaps on interrupted invoke
misc: fastrpc: Add support for audiopd
misc: fastrpc: Rework fastrpc_req_munmap
misc: fastrpc: Use fastrpc_map_put in fastrpc_map_create on fail
misc: fastrpc: Add fastrpc_remote_heap_alloc
misc: fastrpc: Add reserved mem support
misc: fastrpc: Rename audio protection domain to root
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- a new driver for Cypress Generation 5 touchscreens
- a new driver for Hynitron cstxxx touchscreens
- a new driver for Himax hx83112b touchscreen
- I2C input devices have been converted to use i2c's probe_new()
- a large number of input devices are now using
DEFINE_SIMPLE_DEV_PM_OPS and pm_sleep_ptr() and no longer use
__maybe_unused annotations
- improvements to msg2638 touchscreen driver to also support msg2138
- conversion of several input deevine bindings to yaml/DT schema
- changes to select touch drivers to move handling of wake irqs to the
PM core
- other assorted fixes and improvements.
* tag 'input-for-v6.2-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (165 commits)
Input: elants_i2c - delay longer with reset asserted
dt-bindings: input: Convert ti,drv260x to DT schema
dt-bindings: input: gpio-beeper: Convert to yaml schema
Input: pxspad - fix unused data warning when force feedback not enabled
Input: lpc32xx - allow building with COMPILE_TEST
Input: nomadik-ske-keypad - allow building with COMPILE_TEST
Input: pxa27xx-keypad - allow build with COMPILE_TEST
Input: spear-keyboard - improve build coverage using COMPILE_TEST
Input: tegra-kbc - allow build with COMPILE_TEST
Input: tegra-kbc - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
Input: tca6416-keypad - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
Input: tc3589x - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
Input: st-keyscan - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
Input: sh-keysc - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
Input: qt1070 - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
Input: pxa27x_keypad - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
Input: pmic8xxx-keypad - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
Input: nomadik-ske-keypad - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
Input: mcs-touchkey - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
Input: max7359-keypad - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
...
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
4th set of IIO fixes for 6.1
Single patch fixing a memory leak in an error path.
Fine to queue either for 6.2 if too late for 6.1
* tag 'iio-fixes-for-6.1d' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
iio: fix memory leak in iio_device_register_eventset()
dt-bindings: iio: adc: Remove the property "aspeed,trim-data-valid"
iio: adc: aspeed: Remove the trim valid dts property.
iio: core: Fix entry not deleted when iio_register_sw_trigger_type() fails
iio: accel: bma400: Fix memory leak in bma400_get_steps_reg()
iio: light: rpr0521: add missing Kconfig dependencies
iio: health: afe4404: Fix oob read in afe4404_[read|write]_raw
iio: health: afe4403: Fix oob read in afe4403_read_raw
iio: light: apds9960: fix wrong register for gesture gain
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
2nd set of IIO new device support, cleanups etc for 6.2
Includes a few late breaking fixes for old issues.
Contains a large set of conversions from i2c probe() to probe_new()
as part of an attempt to finally get rid of the old style probe().
New devices support
* adi,ad74115
- New driver for this complex input/output device with 16 bit ADCs,
14 bit DACs amongst other features.
- A few tidy ups / removal of unused data patches followed.
* adi,adf4377
- New driver for this dual output integer-N phased locked loop and VCO
chip.
* maxim,max30208
- New driver for this high accuracy digital temperature sensor.
* st,lsm6dsx
- Support for LSM6DS016IS (chip specific data)
- Support for ISM330IS (id entry only)
Minor cleanups etc
* adi,adis
- Fix a deadlock on device instance specific mutex.
- Tidy up by calling unlocked form of __adis_initial_startup() in all
cases and dropping the locked version.
* adi,ad4130
- Reference spi-peripehral-props.yaml in the dt-binding.
* adi,ad74413r
- Fix a bug brought on by integer promotion of signed value to unsigned type.
- Add an spi_device_id table to allow module autoloading to work.
- Add support for reset pin.
* adi,ad7606_par
- devm_platform_get_and_ioremap_resource() instead of opencoding.
* adi,ad7923
- Add dt-bindings docs for ad7927 via a fallback to ad7928 and do similar
for ad7924.
* adi,ltc2983
- Drop a now unneeded $ref for -nanoamp property as dt-schema no covers this
unit.
* maxim,max11410
- Fix mask due to repeated use of VREFN instead of one of them being VREFP.
* qcom,spmi-iadc
- Add fallback compatibles to dt-binding.
* renesas,rzg2l
- Document use for RZ/Five SoC.
* st,stm32-adc
- Improved calibration support with error logging and a debugfs
interface to read back the result.
* ti,adc128s052
- Fix an issue with missing data members in the adc128_of_match table that
meant all device were being handled as adc128s052 ADCs.
* tag 'iio-for-6.2b' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (178 commits)
iio: addac: ad74413r: fix blank line after declaration warning
iio: addac: ad74115: remove unused ad74115_dac_slew_rate_hz_tbl
dt-bindings: iio: imu: st_lsm6dsx: add ism330is
iio: imu: st_lsm6dsx: add support to ISM330IS
iio: frequency: adf4377: add support for ADF4377
dt-bindings: iio: frequency: add adf4377 doc
dt-bindings: iio: adc: ad4130: use spi-peripheral-props.yaml
dt-bindings: iio: temperature: ltc2983: drop $ref for -nanoamp properties
dt-bindings: iio: adc: renesas,rzg2l-adc: Document RZ/Five SoC
iio: adc128s052: add proper .data members in adc128_of_match table
iio: adc: stm32-adc: add debugfs to read raw calibration result
iio: adc: stm32-adc: improve calibration error log
iio: adc: stm32-adc: smart calibration support
iio: addac: ad74413r: add support for reset-gpio
dt-bindings: iio: ad74413r: add optional reset-gpios
iio: addac: ad74413r: add spi_device_id table
dt-bindings: iio/adc: qcom,spmi-iadc: use double compatibles
dt-bindings: iio: imu: st_lsm6dsx: add lsm6dso16is
iio: imu: st_lsm6dsx: add support to LSM6DSO16IS
iio: addac: add AD74115 driver
...
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
1st set of IIO new device support, feature and cleanup for 6.2 (take2)
We have finally managed to take the mlock mutex entirely private so as
to avoid it being used for multiple purposes. Now it is just used to
protect device mode transitions (typically to and from buffered capture).
Includes merge of an immutable i2c branch to get the new
i2c_client_get_device_id() (thanks to Wolfram for providing the branch).
Based on rc3 to pick up some precursor fixes from early in the cycle and
avoid an unnecessarily messy history.
New device support
* adi,ad4310
- New driver to support this very flexible measurement device including
a 24 bit ADC. Later fix for documentation build issue.
* adi,adxl355
- Add support of the ADXL359 accelerometer.
* adi,ltc2983
- Support additional variants of the temperatures sensor:
LTC2984 with an EEPROM
LTC2985, LTC2986 with only 10 channels.
* invensense,icm42600
- Add support for icm42631 (needed only ID and WHOAMI)
* kionix,kx022a
- New driver for this 3 axis accelerometer.
* maxim,max11401
- New driver to support this 24-bit 10 channel ADC.
Includes some new ABI to support configuration of notch filters.
* mediatek,mt6370
- Add new driver to support the ADC part of the mt6370.
* st,lsm6dsx
- Add support for LSM6DSV accelerometer and gyroscope. Simple additional
of chip specific data and IDs.
- Add support for LSM6DSV16X accelerometer and gyroscope. Compatible with
features currently implemented for the LSM6DSV.
* st,stm32-adc
- Add support for stm32pm13x SoCs.
core / subsystem wide:
- Add new IIO_STATIC_CONST_DEVICE_ATTR() which is a dance necessary to
allow for the wrapping of attributes in the code that duplicates them
for multiple buffers.
- Harden against future issues with expectation that all buffer attributes
are iio_dev_attrs by changing the code to take an array of pointers
of the correct type.
- Last transitions of drivers to local locks rather than missuses of mlock.
- Add an iio_device_claim_buffer_mode() callback to avoid a race in the
max30100 driver without directly using mlock.
- Move mlock to the opaque IIO device structure to prevent misuse.
- Add missing spi_device_id tables to support auto loading of modules.
- Update some ADI maintainers in DT bindings.
- A few more moves of bus drivers and core module sets to export
name spaces.
- Extensive use of new devm_regulator_get_enable() and friends.
- Switch a bunch of i2c drivers to probe_new() including the bmp280
which makes use of the new i2c_client_get_device_id() helper to
simplify this change.
dt-bindings:
- More use of spi-peripheral-props.yaml.
Features
* freescale,mpl115
- Use runtime PM to implement shutdown GPIO support.
* melexis,mlx90632
- More sophisticated runtime power management
- Provide access to sampling frequency.
- Trivial follow up fixes.
* microchip,mcp3911
- Support control of PGA.
* st,lsm6dsx
- Add support for software triggers for cases where the IRQ lines
are not wired up.
* vishay,vcnl4000
- Add control of integration time.
Minor cleanups and fixes
* adi,ad4130
- Improve ABI documentation formatting.
- Kconfig dependency fixup.
* adi,ad5758
- Minor dt binding fix.
* adi,ad9834
- Tidy up line breaks.
* adi,ade7854
- Minor improvement in code clarity by replacing a ternary.
* adi,admv8818
- Harden code against hardware returning wrong values.
* adi,adxl355
- Warn only if unknown device ID detected to allow for fall back
device tree compatibles on future devices.
* adi,ltc2983
- dt-bindings clarifications and general improvements.
- Ensure DMA safe buffer for bulk writes without relying on current
regmap implementation choices.
* avago,adps9960
- Fix up a disconnect between event enable attributes and what was
enabled.
* bosch,bma400
- Switch to dev_err_probe() from open coded EPROBE_DEFER handling.
* cosmic,cc10001
- Fully devm managed probe() and related tidying up.
* meas,ms5611
- Add an example of spi-max-frequency.
* meleixs,mlx90632
- Tidy up confusing error return value.
- Style improvements.
* multiplexer
- Switch to dev_err_probe() from open coded EPROBE_DEFER handling.
* qcom,spmi-vadc
- Minor dt binding improvements.
* rockchip,saradc
- Add ID for rv1126.
* semtech,sx9360
- Add SAMM0208 ACPI ID. Doesn't appear to be a valid vendor prefix
but is in the wild.
* st,lsm6dsx
- Factor out common code as _device_set_enable().
- Fix up wrong docs after LSM6DSV addition.
* st,stm32-adc
- Manage the min sampling time on all internal channels.
* trig,sysfs
- Improve error labels.
* tag 'iio-for-6.2a-take2' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (146 commits)
iio: pressure: bmp280: convert to i2c's .probe_new()
iio: imu: st_lsm6dsx: fix LSM6DSV sensor description
iio: adc: ad4130: depend on GPIOLIB
staging: iio: meter: replace ternary operator by if condition
iio: light: apds9960: Fix iio_event_spec structures
dt-bindings: iio: imu: Add inv_icm42600 documentation
iio: imu: inv_icm42600: Add support for icm42631
dt-bindings: iio: adc: rockchip-saradc: Add saradc for rv1126
dt-bindings: iio: dac: adi,ad5758: Drop 'contains' from 'adi,dc-dc-mode'
dt-bindings: iio: imu: st_lsm6dsx: add lsm6dsv16x
iio: imu: st_lsm6dsx: add support to LSM6DSV16X
iio: proximity: sx9360: Add a new ACPI hardware ID
iio: temperature: mlx90632: Add missing static marking on devm_pm_ops
iio: temperature: mlx90632: Add error handling for devm_pm_runtime_enable()
iio: temperature: ltc2983: support more parts
dt-bindings: iio: temperature: ltc2983: support more parts
dt-bindings: iio: temperature: ltc2983: use generic node name in example
dt-bindings: iio: temperature: ltc2983: describe broken mux delay property
dt-bindings: iio: temperature: ltc2983: refine descriptions
dt-bindings: iio: temperature: ltc2983: change default excitation for custom thermistors
...
|
|
Checkpatch wants a blank line after all declarations. Add it now,
even though the patch has already been submitted.
Signed-off-by: Cosmin Tanislav <cosmin.tanislav@analog.com>
Link: https://lore.kernel.org/r/20221124153049.8851-1-cosmin.tanislav@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
This table was supposed to be used for handling the DAC rate, but it
ended up being unused. Remove it.
Signed-off-by: Cosmin Tanislav <cosmin.tanislav@analog.com>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20221124152559.7895-1-cosmin.tanislav@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add support to STM ISM330IS (accelerometer and gyroscope) Mems sensor.
The ISM330IS sensor can use LSM6DSO16IS as fallback device since it
implements all the ISM330IS features currently implemented in
st_lsm6dsx.
Datasheet: https://www.st.com/resource/en/datasheet/ism330is.pdf
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/4cd1614060e06f49cd92f5930d8fd40117c07920.1669279604.git.lorenzo@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The ADF4377 is a high performance, ultralow jitter, dual output integer-N
phased locked loop (PLL) with integrated voltage controlled oscillator
(VCO) ideally suited for data converter and mixed signal front end (MxFE)
clock applications.
Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/adf4377.pdf
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20221115110041.71495-2-antoniu.miclaus@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Prior to commit bd5d54e4d49d ("iio: adc128s052: add ACPI _HID
AANT1280"), the driver unconditionally used spi_get_device_id() to get
the index into the adc128_config array.
However, with that commit, OF-based boards now incorrectly treat all
supported sensors as if they are an adc128s052, because all the .data
members of the adc128_of_match table are implicitly 0. Our board,
which has an adc122s021, thus exposes 8 channels whereas it really
only has two.
Fixes: bd5d54e4d49d ("iio: adc128s052: add ACPI _HID AANT1280")
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20221115132324.1078169-1-linux@rasmusvillemoes.dk
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add debugfs to read linear ADC STM32 self calibration results.
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/20221115103124.70074-4-olivier.moysan@foss.st.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add more information in calibration error log to differentiate
single-ended and differential calibration.
Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/20221115103124.70074-3-olivier.moysan@foss.st.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add smart calibration support for STM32MP1.
- STM32MP15x: both linear & offset calibration are supported
- STM32MP13x: Only offset calibration is supported
Linear calibration:
Linear calibration is SoC dependent and does not change over time
so it can be done only once.
Linear calibration may have already been done in u-boot.
Skip calibration execution if calibration data are already available.
Save calibration factors in private data and restore them from private
data on next ADC start.
Offset calibration:
This calibration may vary over time, depending on temperature or voltage.
Run offset single-ended and differential calibration on each ADC start,
as it is not time consuming. This calibration do not need to be saved.
So, remove calfact_s and calfact_d value and bitfields that are no
longer used.
Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/20221115103124.70074-2-olivier.moysan@foss.st.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
We have a board where the reset pin of the ad74412 is connected to a
gpio, but also pulled low (i.e., asserted) by default. Hence to get
the chip out of reset, the driver needs to know about that gpio and
deassert the reset signal before attempting to communicate with the
chip.
When a reset-gpio is given in device tree, use that instead of the
software reset. According to the data sheet, the two methods are
functionally equivalent.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Link: https://lore.kernel.org/r/20221115095517.1008632-4-linux@rasmusvillemoes.dk
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Silence the run-time warning
SPI driver ad74413r has no spi_device_id for adi,ad74412r
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Link: https://lore.kernel.org/r/20221115095517.1008632-2-linux@rasmusvillemoes.dk
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add support to STM LSM6DSO16IS (accelerometer and gyroscope) Mems sensor.
Datasheet: https://www.st.com/resource/en/datasheet/lsm6dso16is.pdf
Tested-by: Mario Tesi <mario.tesi@st.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/df6a9d4653cd69f7204190f8b6a9b618fd48bd23.1668605631.git.lorenzo@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The AD74115H is a single-channel, software-configurable, input and
output device for industrial control applications. The AD74115H
provides a wide range of use cases, integrated on a single chip.
These use cases include analog output, analog input, digital output,
digital input, resistance temperature detector (RTD), and thermocouple
measurement capability. The AD74115H also has an integrated HART modem.
A serial peripheral interface (SPI) is used to handle all communications
to the device, including communications with the HART modem. The digital
input and digital outputs can be accessed via the SPI or the
general-purpose input and output (GPIO) pins to support higher
speed data rates.
The device features a 16-bit, sigma-delta analog-to-digital converter
(ADC) and a 14-bit digital-to-analog converter (DAC).
The AD74115H contains a high accuracy 2.5 V on-chip reference that can
be used as the DAC and ADC reference.
Signed-off-by: Cosmin Tanislav <cosmin.tanislav@analog.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20221117080916.411766-3-cosmin.tanislav@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
ad74413_get_input_current_offset()
The constant AD74413R_ADC_RESULT_MAX is defined via GENMASK, so its
type is "unsigned long".
Hence in the expression voltage_offset * AD74413R_ADC_RESULT_MAX,
voltage_offset is first promoted to unsigned long, and since it may be
negative, that results in a garbage value. For example, when range is
AD74413R_ADC_RANGE_5V_BI_DIR, voltage_offset is -2500 and
voltage_range is 5000, so the RHS of this assignment is, depending on
sizeof(long), either 826225UL or 3689348814709142UL, which after
truncation to int then results in either 826225 or 1972216214 being
the output from in_currentX_offset.
Casting to int avoids that promotion and results in the correct -32767
output.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Fixes: fea251b6a5db (iio: addac: add AD74413R driver)
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20221118123209.1658420-1-linux@rasmusvillemoes.dk
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/202211220935338446115@zte.com.cn
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Call '__adis_initial_startup()' instead of its locked variant in
'adis16400_probe()'.
The locks are not needed at this point.
Signed-off-by: Ramona Bolboaca <ramona.bolboaca@analog.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20221122082757.449452-7-ramona.bolboaca@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Call '__adis_initial_startup()' instead of its locked variant in
'adis16260_probe()'.
The locks are not needed at this point.
Signed-off-by: Ramona Bolboaca <ramona.bolboaca@analog.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20221122082757.449452-6-ramona.bolboaca@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Call '__adis_initial_startup()' instead of its locked variant in
'adis16136_probe()'.
The locks are not needed at this point.
Signed-off-by: Ramona Bolboaca <ramona.bolboaca@analog.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20221122082757.449452-5-ramona.bolboaca@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Call '__adis_initial_startup()' instead of its locked variant in
'adis16209_probe()'.
The locks are not needed at this point.
Signed-off-by: Ramona Bolboaca <ramona.bolboaca@analog.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20221122082757.449452-4-ramona.bolboaca@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Call '__adis_initial_startup()' instead of its locked variant in
'adis16201_probe()'.
The locks are not needed at this point.
Signed-off-by: Ramona Bolboaca <ramona.bolboaca@analog.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20221122082757.449452-3-ramona.bolboaca@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add '__adis_enable_irq()' implementation which is the unlocked
version of 'adis_enable_irq()'.
Call '__adis_enable_irq()' instead of 'adis_enable_irq()' from
'__adis_intial_startup()' to keep the expected unlocked functionality.
This fix is needed to remove a deadlock for all devices which are
using 'adis_initial_startup()'. The deadlock occurs because the
same mutex is acquired twice, without releasing it.
The mutex is acquired once inside 'adis_initial_startup()', before
calling '__adis_initial_startup()', and once inside
'adis_enable_irq()', which is called by '__adis_initial_startup()'.
The deadlock is removed by calling '__adis_enable_irq()', instead of
'adis_enable_irq()' from within '__adis_initial_startup()'.
Fixes: b600bd7eb3335 ("iio: adis: do not disabe IRQs in 'adis_init()'")
Signed-off-by: Ramona Bolboaca <ramona.bolboaca@analog.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20221122082757.449452-2-ramona.bolboaca@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
VREFP bit was missing from channel configuration mask and VREFN bit was
included twice instead which fails to enable positive reference buffer when
requested by a channel. Channels that don't enable vrefp buffer were not
affected.
Fixes: a44ef7c46097 ("iio: adc: add max11410 adc driver")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Ibrahim Tilki <Ibrahim.Tilki@analog.com>
Link: https://lore.kernel.org/r/20221122114718.17557-1-Ibrahim.Tilki@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Maxim MAX30208 is a digital temperature sensor with 0.1°C accuracy.
Add support for max30208 driver in iio subsystem.
Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX30208.pdf
Signed-off-by: Rajat Khandelwal <rajat.khandelwal@linux.intel.com>
Link: https://lore.kernel.org/r/20221122175300.800956-1-rajat.khandelwal@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20221118224540.619276-191-uwe@kleine-koenig.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20221118224540.619276-190-uwe@kleine-koenig.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20221118224540.619276-189-uwe@kleine-koenig.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20221118224540.619276-188-uwe@kleine-koenig.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Crt Mori <cmo@melexis.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20221118224540.619276-187-uwe@kleine-koenig.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Crt Mori<cmo@melexis.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20221118224540.619276-186-uwe@kleine-koenig.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20221118224540.619276-185-uwe@kleine-koenig.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20221118224540.619276-184-uwe@kleine-koenig.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20221118224540.619276-183-uwe@kleine-koenig.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20221118224540.619276-182-uwe@kleine-koenig.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20221118224540.619276-181-uwe@kleine-koenig.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20221118224540.619276-180-uwe@kleine-koenig.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20221118224540.619276-179-uwe@kleine-koenig.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20221118224540.619276-178-uwe@kleine-koenig.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20221118224540.619276-177-uwe@kleine-koenig.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20221118224540.619276-176-uwe@kleine-koenig.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20221118224540.619276-175-uwe@kleine-koenig.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20221118224540.619276-174-uwe@kleine-koenig.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20221118224540.619276-173-uwe@kleine-koenig.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Link: https://lore.kernel.org/r/20221118224540.619276-172-uwe@kleine-koenig.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20221118224540.619276-171-uwe@kleine-koenig.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20221118224540.619276-170-uwe@kleine-koenig.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20221118224540.619276-169-uwe@kleine-koenig.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
