summaryrefslogtreecommitdiff
path: root/drivers/iio
AgeCommit message (Collapse)AuthorFilesLines
2022-11-14iio: adc: aspeed: Remove the trim valid dts property.Billy Tsai1-6/+5
The dts property "aspeed,trim-data-valid" is currently used to determine whether to read trimming data from the OTP register. If this is set on a device without valid trimming data in the OTP the ADC will not function correctly. This patch drops the use of this property and instead uses the default (unprogrammed) OTP value of 0 to detect when a fallback value of 0x8 should be used rather then the value read from the OTP. Fixes: d0a4c17b4073 ("iio: adc: aspeed: Get and set trimming data.") Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com> Link: https://lore.kernel.org/r/20221114025057.10843-1-billy_tsai@aspeedtech.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-11-12iio: core: Fix entry not deleted when iio_register_sw_trigger_type() failsChen Zhongjin1-1/+5
In iio_register_sw_trigger_type(), configfs_register_default_group() is possible to fail, but the entry add to iio_trigger_types_list is not deleted. This leaves wild in iio_trigger_types_list, which can cause page fault when module is loading again. So fix this by list_del(&t->list) in error path. BUG: unable to handle page fault for address: fffffbfff81d7400 Call Trace: <TASK> iio_register_sw_trigger_type do_one_initcall do_init_module load_module ... Fixes: b662f809d410 ("iio: core: Introduce IIO software triggers") Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com> Link: https://lore.kernel.org/r/20221108032802.168623-1-chenzhongjin@huawei.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-11-12iio: accel: bma400: Fix memory leak in bma400_get_steps_reg()Dong Chenchen1-1/+3
When regmap_bulk_read() fails, it does not free steps_raw, which will cause a memory leak issue, this patch fixes it. Fixes: d221de60eee3 ("iio: accel: bma400: Add separate channel for step counter") Signed-off-by: Dong Chenchen <dongchenchen2@huawei.com> Reviewed-by: Jagath Jog J <jagathjog1996@gmail.com> Link: https://lore.kernel.org/r/20221110010726.235601-1-dongchenchen2@huawei.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-11-12iio: light: rpr0521: add missing Kconfig dependenciesPaul Gazzillo1-0/+2
Fix an implicit declaration of function error for rpr0521 under some configs When CONFIG_RPR0521 is enabled without CONFIG_IIO_TRIGGERED_BUFFER, the build results in "implicit declaration of function" errors, e.g., drivers/iio/light/rpr0521.c:434:3: error: implicit declaration of function 'iio_trigger_poll_chained' [-Werror=implicit-function-declaration] 434 | iio_trigger_poll_chained(data->drdy_trigger0); | ^~~~~~~~~~~~~~~~~~~~~~~~ This fix adds select dependencies to RPR0521's configuration declaration. Fixes: e12ffd241c00 ("iio: light: rpr0521 triggered buffer") Signed-off-by: Paul Gazzillo <paul@pgazz.com> Link: https://bugzilla.kernel.org/show_bug.cgi?id=216678 Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20221110214729.ls5ixav5kxpeftk7@device Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-11-12iio: health: afe4404: Fix oob read in afe4404_[read|write]_rawWei Yongjun1-5/+7
KASAN report out-of-bounds read as follows: BUG: KASAN: global-out-of-bounds in afe4404_read_raw+0x2ce/0x380 Read of size 4 at addr ffffffffc00e4658 by task cat/278 Call Trace: afe4404_read_raw iio_read_channel_info dev_attr_show The buggy address belongs to the variable: afe4404_channel_leds+0x18/0xffffffffffffe9c0 This issue can be reproduce by singe command: $ cat /sys/bus/i2c/devices/0-0058/iio\:device0/in_intensity6_raw The array size of afe4404_channel_leds and afe4404_channel_offdacs are less than channels, so access with chan->address cause OOB read in afe4404_[read|write]_raw. Fix it by moving access before use them. Fixes: b36e8257641a ("iio: health/afe440x: Use regmap fields") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Andrew Davis <afd@ti.com> Link: https://lore.kernel.org/r/20221107152010.95937-1-weiyongjun@huaweicloud.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-11-12iio: health: afe4403: Fix oob read in afe4403_read_rawWei Yongjun1-2/+3
KASAN report out-of-bounds read as follows: BUG: KASAN: global-out-of-bounds in afe4403_read_raw+0x42e/0x4c0 Read of size 4 at addr ffffffffc02ac638 by task cat/279 Call Trace: afe4403_read_raw iio_read_channel_info dev_attr_show The buggy address belongs to the variable: afe4403_channel_leds+0x18/0xffffffffffffe9e0 This issue can be reproduced by singe command: $ cat /sys/bus/spi/devices/spi0.0/iio\:device0/in_intensity6_raw The array size of afe4403_channel_leds is less than channels, so access with chan->address cause OOB read in afe4403_read_raw. Fix it by moving access before use it. Fixes: b36e8257641a ("iio: health/afe440x: Use regmap fields") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Andrew Davis <afd@ti.com> Link: https://lore.kernel.org/r/20221107151946.89260-1-weiyongjun@huaweicloud.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-11-06iio: light: apds9960: fix wrong register for gesture gainAlejandro Concepción Rodríguez1-6/+6
Gesture Gain Control is in REG_GCONF_2 (0xa3), not in REG_CONFIG_2 (0x90). Fixes: aff268cd532e ("iio: light: add APDS9960 ALS + promixity driver") Signed-off-by: Alejandro Concepcion-Rodriguez <asconcepcion@acoro.eu> Acked-by: Matt Ranostay <matt.ranostay@konsulko.com> Cc: <Stable@vger.kernel.org> Link: https://lore.kernel.org/r/EaT-NKC-H4DNX5z4Lg9B6IWPD5TrTrYBr5DYB784wfDKQkTmzPXkoYqyUOrOgJH-xvTsEkFLcVkeAPZRUODEFI5dGziaWXwjpfBNLeNGfNc=@acoro.eu Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-11-01iio: imu: bno055: uninitialized variable bug in bno055_trigger_handler()Dan Carpenter1-1/+1
This bug is basically harmless, although it will trigger a runtime warning if you use KMSan. On the first iteration through the loop, the "best_delta" variable is uninitialized so re-order the condition to prevent reading uninitialized memory. Fixes: 4aefe1c2bd0c ("iio: imu: add Bosch Sensortec BNO055 core driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Nuno Sá <nuno.sa@analog.com> Link: https://lore.kernel.org/r/Y0kuaO9PQkSQja+A@kili Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-11-01iio: adc: at91_adc: fix possible memory leak in at91_adc_allocate_trigger()Yang Yingliang1-1/+3
If iio_trigger_register() returns error, it should call iio_trigger_free() to give up the reference that hold in iio_trigger_alloc(), so that it can call iio_trig_release() to free memory when the refcount hit to 0. Fixes: 0e589d5fb317 ("ARM: AT91: IIO: Add AT91 ADC driver.") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20221024084511.815096-1-yangyingliang@huawei.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-11-01iio: adc: mp2629: fix potential array out of bound accessSaravanan Sekar1-1/+2
Add sentinel at end of maps to avoid potential array out of bound access in iio core. Fixes: 7abd9fb64682 ("iio: adc: mp2629: Add support for mp2629 ADC driver") Signed-off-by: Saravanan Sekar <sravanhome@gmail.com> Link: https://lore.kernel.org/r/20221029093000.45451-4-sravanhome@gmail.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-10-29iio: adc: mp2629: fix wrong comparison of channelSaravanan Sekar1-1/+1
Input voltage channel enum is compared against iio address instead of the channel. Fixes: 7abd9fb64682 ("iio: adc: mp2629: Add support for mp2629 ADC driver") Signed-off-by: Saravanan Sekar <sravanhome@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20221029093000.45451-2-sravanhome@gmail.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-10-29iio: pressure: ms5611: changed hardcoded SPI speed to value limitedMitja Spes1-1/+1
Don't hardcode the ms5611 SPI speed, limit it instead. Signed-off-by: Mitja Spes <mitja@lxnav.com> Fixes: c0644160a8b5 ("iio: pressure: add support for MS5611 pressure and temperature sensor") Link: https://lore.kernel.org/r/20221021135827.1444793-3-mitja@lxnav.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-10-29iio: pressure: ms5611: fixed value compensation bugMitja Spes2-32/+31
When using multiple instances of this driver the compensation PROM was overwritten by the last initialized sensor. Now each sensor has own PROM storage. Signed-off-by: Mitja Spes <mitja@lxnav.com> Fixes: 9690d81a02dc ("iio: pressure: ms5611: add support for MS5607 temperature and pressure sensor") Link: https://lore.kernel.org/r/20221021135827.1444793-2-mitja@lxnav.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-10-29iio: accel: bma400: Ensure VDDIO is enable defore reading the chip ID.Jonathan Cameron1-12/+12
The regulator enables were after the check on the chip variant, which was very unlikely to return a correct value when not powered. Presumably all the device anyone is testing on have a regulator that is already powered up when this code runs for reasons beyond the scope of this driver. Move the read call down a few lines. Fixes: 3cf7ded15e40 ("iio: accel: bma400: basic regulator support") Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Dan Robertson <dan@dlrobertson.com> Cc: <Stable@vger.kernel.org> Link: https://lore.kernel.org/r/20221002144133.3771029-1-jic23@kernel.org
2022-10-24iio: adc: at91-sama5d2_adc: get rid of 5 degrees Celsius adjustmentClaudiu Beznea1-4/+2
On SAMA7G5 final chip version there is no need for 5 degrees Celsius adjustment when computing junction temperature, thus, remove it. Fixes: 5ab38b81895c ("iio: adc: at91-sama5d2_adc: add support for temperature sensor") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20221020102705.3639204-1-claudiu.beznea@microchip.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-10-24iio: trigger: sysfs: fix possible memory leak in iio_sysfs_trig_init()Yang Yingliang1-1/+5
dev_set_name() allocates memory for name, it need be freed when device_add() fails, call put_device() to give up the reference that hold in device_initialize(), so that it can be freed in kobject_cleanup() when the refcount hit to 0. Fault injection test can trigger this: unreferenced object 0xffff8e8340a7b4c0 (size 32): comm "modprobe", pid 243, jiffies 4294678145 (age 48.845s) hex dump (first 32 bytes): 69 69 6f 5f 73 79 73 66 73 5f 74 72 69 67 67 65 iio_sysfs_trigge 72 00 a7 40 83 8e ff ff 00 86 13 c4 f6 ee ff ff r..@............ backtrace: [<0000000074999de8>] __kmem_cache_alloc_node+0x1e9/0x360 [<00000000497fd30b>] __kmalloc_node_track_caller+0x44/0x1a0 [<000000003636c520>] kstrdup+0x2d/0x60 [<0000000032f84da2>] kobject_set_name_vargs+0x1e/0x90 [<0000000092efe493>] dev_set_name+0x4e/0x70 Fixes: 1f785681a870 ("staging:iio:trigger sysfs userspace trigger rework.") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Cc: <Stable@vger.kernel.org> Link: https://lore.kernel.org/r/20221022074212.1386424-1-yangyingliang@huawei.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-10-17iio: bmc150-accel-core: Fix unsafe buffer attributesMatti Vaittinen1-5/+18
The iio_triggered_buffer_setup_ext() was changed by commit 15097c7a1adc ("iio: buffer: wrap all buffer attributes into iio_dev_attr") to silently expect that all attributes given in buffer_attrs array are device-attributes. This expectation was not forced by the API - and some drivers did register attributes created by IIO_CONST_ATTR(). The added attribute "wrapping" does not copy the pointer to stored string constant and when the sysfs file is read the kernel will access to invalid location. Change the IIO_CONST_ATTRs from the driver to IIO_DEVICE_ATTR in order to prevent the invalid memory access. Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com> Fixes: 15097c7a1adc ("iio: buffer: wrap all buffer attributes into iio_dev_attr") Link: https://lore.kernel.org/r/cf8a56658fc38db8bed64f456d898f5ad5a2814f.1664782676.git.mazziesaccount@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-10-17iio: adxl367: Fix unsafe buffer attributesMatti Vaittinen1-5/+18
The devm_iio_kfifo_buffer_setup_ext() was changed by commit 15097c7a1adc ("iio: buffer: wrap all buffer attributes into iio_dev_attr") to silently expect that all attributes given in buffer_attrs array are device-attributes. This expectation was not forced by the API - and some drivers did register attributes created by IIO_CONST_ATTR(). The added attribute "wrapping" does not copy the pointer to stored string constant and when the sysfs file is read the kernel will access to invalid location. Change the IIO_CONST_ATTRs from the driver to IIO_DEVICE_ATTR in order to prevent the invalid memory access. Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com> Fixes: 15097c7a1adc ("iio: buffer: wrap all buffer attributes into iio_dev_attr") Cc: <Stable@vger.kernel.org> Link: https://lore.kernel.org/r/2e2d9ec34fb1df8ab8e2749199822db8cc91d302.1664782676.git.mazziesaccount@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-10-17iio: adxl372: Fix unsafe buffer attributesMatti Vaittinen1-5/+18
The iio_triggered_buffer_setup_ext() was changed by commit 15097c7a1adc ("iio: buffer: wrap all buffer attributes into iio_dev_attr") to silently expect that all attributes given in buffer_attrs array are device-attributes. This expectation was not forced by the API - and some drivers did register attributes created by IIO_CONST_ATTR(). The added attribute "wrapping" does not copy the pointer to stored string constant and when the sysfs file is read the kernel will access to invalid location. Change the IIO_CONST_ATTRs from the driver to IIO_DEVICE_ATTR in order to prevent the invalid memory access. Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com> Fixes: 15097c7a1adc ("iio: buffer: wrap all buffer attributes into iio_dev_attr") Cc: <Stable@vger.kernel.org> Link: https://lore.kernel.org/r/19158499623cdf7f9c5efae1f13c9f1a918ff75f.1664782676.git.mazziesaccount@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-10-17iio: at91-sama5d2_adc: Fix unsafe buffer attributesMatti Vaittinen1-5/+18
The iio_triggered_buffer_setup_ext() was changed by commit 15097c7a1adc ("iio: buffer: wrap all buffer attributes into iio_dev_attr") to silently expect that all attributes given in buffer_attrs array are device-attributes. This expectation was not forced by the API - and some drivers did register attributes created by IIO_CONST_ATTR(). The added attribute "wrapping" does not copy the pointer to stored string constant and when the sysfs file is read the kernel will access to invalid location. Change the IIO_CONST_ATTRs from the driver to IIO_DEVICE_ATTR in order to prevent the invalid memory access. Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com> Fixes: 15097c7a1adc ("iio: buffer: wrap all buffer attributes into iio_dev_attr") Tested-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/be69775aa302159f088b8b91894e6ec449bca65b.1664782676.git.mazziesaccount@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-10-17iio: temperature: ltc2983: allocate iio channels onceCosmin Tanislav1-7/+6
Currently, every time the device wakes up from sleep, the iio_chan array is reallocated, leaking the previous one until the device is removed (basically never). Move the allocation to the probe function to avoid this. Signed-off-by: Cosmin Tanislav <cosmin.tanislav@analog.com> Fixes: f110f3188e563 ("iio: temperature: Add support for LTC2983") Cc: <Stable@vger.kernel.org> Link: https://lore.kernel.org/r/20221014123724.1401011-2-demonsingur@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-10-17iio: adc: stm32-adc: fix channel sampling time initOlivier Moysan1-5/+6
Fix channel init for ADC generic channel bindings. In generic channel initialization, stm32_adc_smpr_init() is called to initialize channel sampling time. The "st,min-sample-time-ns" property is an optional property. If it is not defined, stm32_adc_smpr_init() is currently skipped. However stm32_adc_smpr_init() must always be called, to force a minimum sampling time for the internal channels, as the minimum sampling time is known. Make stm32_adc_smpr_init() call unconditional. Fixes: 796e5d0b1e9b ("iio: adc: stm32-adc: use generic binding for sample-time") Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Link: https://lore.kernel.org/r/20221012142205.13041-2-olivier.moysan@foss.st.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-10-17iio: adc: mcp3911: mask out device ID in debug printsMarcus Folkesson1-2/+3
The Device ID should not be included when printing register. Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com> Link: https://lore.kernel.org/r/20221010194654.676525-1-marcus.folkesson@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-10-17iio: adc: mcp3911: use correct id bitsMarcus Folkesson1-2/+2
The device ID should be shifted 6 bits to left according to datasheet. Fixes: 3a89b289df5d ("iio: adc: add support for mcp3911") Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com> Link: https://lore.kernel.org/r/20221010194641.676484-1-marcus.folkesson@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-10-17iio: adc: mcp3911: return proper error code on failure to allocate triggerMarcus Folkesson1-1/+1
smatch warnings: drivers/iio/adc/mcp3911.c:441 mcp3911_probe() warn: passing zero to 'PTR_ERR' Fixes: 08a65f61db69 ("iio: adc: mcp3911: add support for interrupts") Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com> Link: https://lore.kernel.org/r/20220927092537.94663-1-marcus.folkesson@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-10-17iio: adc: mcp3911: fix sizeof() vs ARRAY_SIZE() bugDan Carpenter1-1/+1
This code uses sizeof() instead of ARRAY_SIZE() so it reads beyond the end of the mcp3911_osr_table[] array. Fixes: 6d965885f4ea ("iio: adc: mcp3911: add support for oversampling ratio") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Marcus Folkesson <marcus.folkesson@gmail.com> Link: https://lore.kernel.org/r/YzFsjY3xLHUQMjVr@kili Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-10-17iio: light: tsl2583: Fix module unloadingShreeya Patel1-1/+1
tsl2583 probe() uses devm_iio_device_register() and calling iio_device_unregister() causes the unregister to occur twice. s Switch to iio_device_register() instead of devm_iio_device_register() in probe to avoid the device managed cleanup. Fixes: 371894f5d1a0 ("iio: tsl2583: add runtime power management support") Signed-off-by: Shreeya Patel <shreeya.patel@collabora.com> Link: https://lore.kernel.org/r/20220826122352.288438-1-shreeya.patel@collabora.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-10-08Merge tag 'char-misc-6.1-rc1' of ↵Linus Torvalds110-1339/+10350
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc and other driver updates from Greg KH: "Here is the large set of char/misc and other small driver subsystem changes for 6.1-rc1. Loads of different things in here: - IIO driver updates, additions, and changes. Probably the largest part of the diffstat - habanalabs driver update with support for new hardware and features, the second largest part of the diff. - fpga subsystem driver updates and additions - mhi subsystem updates - Coresight driver updates - gnss subsystem updates - extcon driver updates - icc subsystem updates - fsi subsystem updates - nvmem subsystem and driver updates - misc driver updates - speakup driver additions for new features - lots of tiny driver updates and cleanups All of these have been in the linux-next tree for a while with no reported issues" * tag 'char-misc-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (411 commits) w1: Split memcpy() of struct cn_msg flexible array spmi: pmic-arb: increase SPMI transaction timeout delay spmi: pmic-arb: block access for invalid PMIC arbiter v5 SPMI writes spmi: pmic-arb: correct duplicate APID to PPID mapping logic spmi: pmic-arb: add support to dispatch interrupt based on IRQ status spmi: pmic-arb: check apid against limits before calling irq handler spmi: pmic-arb: do not ack and clear peripheral interrupts in cleanup_irq spmi: pmic-arb: handle spurious interrupt spmi: pmic-arb: add a print in cleanup_irq drivers: spmi: Directly use ida_alloc()/free() MAINTAINERS: add TI ECAP driver info counter: ti-ecap-capture: capture driver support for ECAP Documentation: ABI: sysfs-bus-counter: add frequency & num_overflows items dt-bindings: counter: add ti,am62-ecap-capture.yaml counter: Introduce the COUNTER_COMP_ARRAY component type counter: Consolidate Counter extension sysfs attribute creation counter: Introduce the Count capture component counter: 104-quad-8: Add Signal polarity component counter: Introduce the Signal polarity component counter: interrupt-cnt: Implement watch_validate callback ...
2022-10-05Merge tag 'i2c-for-6.1-rc1' of ↵Linus Torvalds75-226/+76
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: - 'remove' callback converted to return void. Big change with trivial fixes all over the tree. Other subsystems depending on this change have been asked to pull an immutable topic branch for this. - new driver for Microchip PCI1xxxx switch - heavy refactoring of the Mellanox BlueField driver - we prefer async probe in the i801 driver now - the rest is usual driver updates (support for more SoCs, some refactoring, some feature additions) * tag 'i2c-for-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (37 commits) i2c: pci1xxxx: prevent signed integer overflow i2c: acpi: Replace zero-length array with DECLARE_FLEX_ARRAY() helper i2c: i801: Prefer async probe i2c: designware-pci: Use standard pattern for memory allocation i2c: designware-pci: Group AMD NAVI quirk parts together i2c: microchip: pci1xxxx: Add driver for I2C host controller in multifunction endpoint of pci1xxxx switch docs: i2c: slave-interface: return errno when handle I2C_SLAVE_WRITE_REQUESTED i2c: mlxbf: remove device tree support i2c: mlxbf: support BlueField-3 SoC i2c: cadence: Add standard bus recovery support i2c: mlxbf: add multi slave functionality i2c: mlxbf: support lock mechanism macintosh/ams: Adapt declaration of ams_i2c_remove() to earlier change i2c: riic: Use devm_platform_ioremap_resource() i2c: mlxbf: remove IRQF_ONESHOT dt-bindings: i2c: rockchip: add rockchip,rk3128-i2c dt-bindings: i2c: renesas,rcar-i2c: Add r8a779g0 support i2c: tegra: Add GPCDMA support i2c: scmi: Convert to be a platform driver i2c: rk3x: Add rv1126 support ...
2022-10-04Merge tag 'thermal-6.1-rc1' of ↵Linus Torvalds1-8/+6
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull thermal control updates from Rafael Wysocki: "The most significant part of this update is the thermal control DT initialization rework from Daniel Lezcano and the following conversion of drivers to use the new API introduced by it Apart from that, the maximum number of trip points in a thermal zone is increased and there are some fixes and code cleanups Specifics: - Rework the device tree initialization, convert the drivers to the new API and remove the old OF code (Daniel Lezcano) - Fix return value to -ENODEV when searching for a specific thermal zone which does not exist (Daniel Lezcano) - Fix the return value inspection in of_thermal_zone_find() (Dan Carpenter) - Fix kernel panic when KASAN is enabled as it detects use after free when unregistering a thermal zone (Daniel Lezcano) - Move the set_trip ops inside the therma sysfs code (Daniel Lezcano) - Remove unnecessary error message as it is already shown in the underlying function (Jiapeng Chong) - Rework the monitoring path and move the locks upper in the call stack to fix some potentials race windows (Daniel Lezcano) - Fix lockdep_assert() warning introduced by the lock rework (Daniel Lezcano) - Do not lock thermal zone mutex in the user space governor (Rafael Wysocki) - Revert the Mellanox 'hotter thermal zone' feature because it is already handled in the thermal framework core code (Daniel Lezcano) - Increase maximum number of trip points in the thermal core (Sumeet Pawnikar) - Replace strlcpy() with unused retval with strscpy() in the core thermal control code (Wolfram Sang) - Use module_pci_driver() macro in the int340x processor_thermal driver (Shang XiaoJing) - Use get_cpu() instead of smp_processor_id() in the intel_powerclamp thermal driver to prevent it from crashing and remove unused accounting for IRQ wakes from it (Srinivas Pandruvada) - Consolidate priv->data_vault checks in int340x_thermal (Rafael Wysocki) - Check the policy first in cpufreq_cooling_register() (Xuewen Yan) - Drop redundant error message from da9062-thermal (zhaoxiao) - Drop of_match_ptr() from thermal_mmio (Jean Delvare)" * tag 'thermal-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (55 commits) thermal: core: Increase maximum number of trip points thermal: int340x: processor_thermal: Use module_pci_driver() macro thermal: intel_powerclamp: Remove accounting for IRQ wakes thermal: intel_powerclamp: Use get_cpu() instead of smp_processor_id() to avoid crash thermal: int340x_thermal: Consolidate priv->data_vault checks thermal: cpufreq_cooling: Check the policy first in cpufreq_cooling_register() thermal: Drop duplicate words from comments thermal: move from strlcpy() with unused retval to strscpy() thermal: da9062-thermal: Drop redundant error message thermal/drivers/thermal_mmio: Drop of_match_ptr() thermal: gov_user_space: Do not lock thermal zone mutex Revert "mlxsw: core: Add the hottest thermal zone detection" thermal/core: Fix lockdep_assert() warning thermal/core: Move the mutex inside the thermal_zone_device_update() function thermal/core: Move the thermal zone lock out of the governors thermal/governors: Group the thermal zone lock inside the throttle function thermal/core: Rework the monitoring a bit thermal/core: Rearm the monitoring only one time thermal/drivers/qcom/spmi-adc-tm5: Remove unnecessary print function dev_err() thermal/of: Remove old OF code ...
2022-09-21iio: adc: mcp3911: add support for oversampling ratioMarcus Folkesson1-0/+58
The chip supports oversampling ratio, so expose it to userspace. Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20220815061625.35568-9-marcus.folkesson@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-09-21iio: adc: mcp3911: add support for interruptsMarcus Folkesson1-0/+53
Make it possible to read values upon interrupts. Configure Data Ready Signal Output Pin to either HiZ or push-pull and use it as interrupt source. Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20220815061625.35568-7-marcus.folkesson@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-09-21iio: adc: mcp3911: add support for buffersMarcus Folkesson2-8/+97
Add support for buffers to make the driver fit for more use cases. Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20220815061625.35568-6-marcus.folkesson@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-09-21iio: adc: mcp3911: use resource-managed version of iio_device_registerMarcus Folkesson1-37/+14
Keep using managed resources as much as possible. Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20220815061625.35568-5-marcus.folkesson@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-09-21iio: accel: bma400: Fix smatch warning based on use of unintialized value.Jonathan Cameron1-1/+2
Only specific bits in this value are ever used and those are initialized, but that is complex to reason about in a checker. Hence, initialize the value to zero and avoid the complexity. Smatch warning: drivers/iio/accel/bma400_core.c:1287 bma400_tap_event_en() error: uninitialized symbol 'field_value'. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: Jagath Jog J <jagathjog1996@gmail.com> Cc: Alexander Potapenko <glider@google.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Jagath Jog J <jagathjog1996@gmail.com> Fixes: 961db2da159d ("iio: accel: bma400: Add support for single and double tap events") Link: https://lore.kernel.org/r/20220917131401.2815486-1-jic23@kernel.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-09-21iio: light: st_uvis25: Use EXPORT_NS_SIMPLE_DEV_PM_OPS()Jonathan Cameron3-8/+5
Using this new macro removes the need to mark the callbacks __maybe_unused. One slightly complexity in this case is that the export will exist if CONFIG_PM is set, but only be used if CONFIG_PM_SLEEP is also set. This is harmless. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Link: https://lore.kernel.org/r/20220807185618.1038812-7-jic23@kernel.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-09-21iio: accel: bmi088: Use EXPORT_NS_GPL_RUNTIME_DEV_PM_OPS() and pm_ptr()Jonathan Cameron2-10/+7
These macros allow the compiler to remove unused pm ops functions without needing to mark them maybe unused. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: LI Qingwu <Qing-wu.Li@leica-geosystems.com.cn> Cc: Mike Looijmans <mike.looijmans@topic.nl> Link: https://lore.kernel.org/r/20220807185618.1038812-6-jic23@kernel.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-09-21iio: proximity: srf04: Use pm_ptr() to remove unused struct dev_pm_opsJonathan Cameron1-5/+5
If CONFIG_PM is not set, the pm_ptr() will ensure that the struct dev_pm_ops and callbacks are removed without the need for __maybe_unused markings. In this case we can't simply use DEFINE_RUNTIME_DEV_PM_OPS() because that would provide suspend and resume functions without the checks the driver is doing before calling runtime_pm functions (whether the necessary GPIO is provided). It may be possible to clean that up in future by moving the checks into the callbacks. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Andreas Klinger <ak@it-klinger.de> Link: https://lore.kernel.org/r/20220807185618.1038812-5-jic23@kernel.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-09-21iio: proximity: sx9360: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()Jonathan Cameron1-4/+4
These new macros avoid the need for marking the callbacks __maybe_unused whilst ensuring both callbacks and structure may be dropped by the compiler if CONFIG_PM_SLEEP is not enabled. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Gwendal Grignou <gwendal@chromium.org> Link: https://lore.kernel.org/r/20220807185618.1038812-4-jic23@kernel.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-09-21iio: proximity: sx9324: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()Jonathan Cameron1-4/+4
These new macros avoid the need for marking the callbacks __maybe_unused whilst ensuring both callbacks and structure may be dropped by the compiler if CONFIG_PM_SLEEP is not enabled. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Gwendal Grignou <gwendal@chromium.org> Link: https://lore.kernel.org/r/20220807185618.1038812-3-jic23@kernel.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-09-21iio: proximity: sx9310: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()Jonathan Cameron1-4/+4
These new macros avoid the need for marking the callbacks __maybe_unused whilst ensuring both callbacks and structure may be dropped by the compiler if CONFIG_PM_SLEEP is not enabled. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Gwendal Grignou <gwendal@chromium.org> Link: https://lore.kernel.org/r/20220807185618.1038812-2-jic23@kernel.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-09-21iio: imu: add BNO055 I2C driverAndrea Merello3-0/+70
Add an I2C driver for communicating to a BNO055 IMU via I2C bus and enable the BNO055 core driver to work in this scenario. Signed-off-by: Andrea Merello <andrea.merello@iit.it> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20220907132205.28021-14-andrea.merello@iit.it Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-09-21iio: imu: add BNO055 serdev driverAndrea Merello5-0/+693
Add a serdev driver for communicating to a BNO055 IMU via serial bus, and enable the BNO055 core driver to work in this scenario. Signed-off-by: Andrea Merello <andrea.merello@iit.it> Link: https://lore.kernel.org/r/20220907132205.28021-13-andrea.merello@iit.it Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-09-21iio: imu: add Bosch Sensortec BNO055 core driverAndrea Merello6-0/+1707
Add the core driver for the BNO055 IMU from Bosch. This IMU can be connected via both serial and I2C busses; separate patches will add support for them. The driver supports "AMG" (Accelerometer, Magnetometer, Gyroscope) mode, that provides raw data from the said internal sensors, and a couple of "fusion" modes (i.e. the IMU also does calculations in order to provide euler angles, quaternions, linear acceleration and gravity measurements). In fusion modes the AMG data is still available (with some calibration refinements done by the IMU), but certain settings such as low pass filters cut-off frequency and sensors' ranges are fixed, while in AMG mode they can be customized; this is why AMG mode can still be interesting. Signed-off-by: Andrea Merello <andrea.merello@iit.it> Link: https://lore.kernel.org/r/20220907132205.28021-9-andrea.merello@iit.it Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-09-21iio: add support for binary attributesAndrea Merello1-1/+3
When a IIO device is registered, the IIO core creates an attribute group on its own, where it puts the channel attributes, and where it copies the attributes in indio_dev->info->attrs. Unfortunately it doesn't take care of binary attributes (i.e. it only consider indio_dev->info->attrs->attrs, and it ignores indio_dev->info->attrs->bin_attrs). Fix this by making the IIO layer take care also of the binary attributes. Note that while it is necessary to copy the non-binary attributes because the IIO layer needs more room to add the channels attribute, it should be enough to assign the bin_attrs pointer to the binary attributes pointed by indio_dev->info->attrs->bin_attrs. Signed-off-by: Andrea Merello <andrea.merello@iit.it> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20220907132205.28021-8-andrea.merello@iit.it Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-09-21iio: add modifers for pitch, yaw, rollAndrea Merello1-0/+3
Add modifiers for reporting rotations as euler angles (i.e. yaw, pitch and roll). Signed-off-by: Andrea Merello <andrea.merello@iit.it> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20220907132205.28021-5-andrea.merello@iit.it Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-09-21iio: add modifiers for linear accelerationAndrea Merello1-0/+3
Add IIO_MOD_LINEAR_X, IIO_MOD_LINEAR_Y and IIO_MOD_LINEAR_Z modifiers to te IIO core, which is preparatory for adding the Bosch BNO055 IMU driver. Bosch BNO055 IMU can report raw accelerations (among x, y and z axis) as well as the so called "linear accelerations" (again, among x, y and z axis) which is basically the acceleration after subtracting gravity and for which those new modifiers are for. Signed-off-by: Andrea Merello <andrea.merello@iit.it> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20220907132205.28021-2-andrea.merello@iit.it Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-09-21iio: pressure: dps310: Reset chip after timeoutEddie James1-10/+64
The DPS310 chip has been observed to get "stuck" such that pressure and temperature measurements are never indicated as "ready" in the MEAS_CFG register. The only solution is to reset the device and try again. In order to avoid continual failures, use a boolean flag to only try the reset after timeout once if errors persist. Fixes: ba6ec48e76bc ("iio: Add driver for Infineon DPS310") Cc: <stable@vger.kernel.org> Signed-off-by: Eddie James <eajames@linux.ibm.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20220915195719.136812-3-eajames@linux.ibm.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-09-21iio: pressure: dps310: Refactor startup procedureEddie James1-89/+99
Move the startup procedure into a function, and correct a missing check on the return code for writing the PRS_CFG register. Cc: <stable@vger.kernel.org> Signed-off-by: Eddie James <eajames@linux.ibm.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20220915195719.136812-2-eajames@linux.ibm.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-09-21iio: adc: ad7923: support extended rangeNuno Sá1-1/+6
By default the driver was always setting the RANGE bit which means that the analog input goes from 0 to VREF. However, we might want to have 0 to 2xVREF. This change adds a new Firmware property to allow for the extended range while keeping the default behavior if nothing is provided. Signed-off-by: Nuno Sá <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20220912081223.173584-3-nuno.sa@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>