summaryrefslogtreecommitdiff
path: root/drivers/iio/accel
AgeCommit message (Collapse)AuthorFilesLines
2021-05-17iio: core: move @id from struct iio_dev to struct iio_dev_opaqueJonathan Cameron8-11/+11
Continuing from Alexandru Ardelean's introduction of the split between driver modifiable fields and those that should only be set by the core. This could have been done in two steps to make the actual move after introducing iio_device_id() but there seemed limited point to that given how mechanical the majority of the patch is. Includes fixup from Alex for missing mxs-lradc-adc conversion. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Alexandru Ardelean <ardeleanalex@gmail.com> Link: https://lore.kernel.org/r/20210426174911.397061-2-jic23@kernel.org
2021-05-17iio: accel: bmi088: Drop manual assignment of iio_dev.dev.parentJonathan Cameron1-1/+0
The core already set this to the same value in devm_iio_device_alloc() Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Mike Looijmans <mike.looijmans@topic.nl> Reviewed-by: Alexandru Ardelean <ardeleanalex@gmail.com> Link: https://lore.kernel.org/r/20210426170251.351957-2-jic23@kernel.org
2021-05-17iio: accel: Add driver for Murata SCA3300 accelerometerTomas Melin3-0/+486
Add initial support for Murata SCA3300 3-axis industrial accelerometer with digital SPI interface. This device also provides a temperature measurement. Datasheet: https://www.murata.com/en-global/products/sensor/accel/sca3300 Signed-off-by: Tomas Melin <tomas.melin@vaisala.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20210426081041.59807-3-tomas.melin@vaisala.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-05-17iio:accel:stk8312: Add lowercase i2c device idJonathan Cameron1-2/+4
These are never upper case. Chances are that all users of this driver were using the ACPI binding but just in case keep the uppercase version but mark it deprecated. Whilst here tidy up some spacing. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/20210401144226.225928-1-jic23@kernel.org
2021-05-10iio: hid-sensors: select IIO_TRIGGERED_BUFFER under HID_SENSOR_IIO_TRIGGERAlexandru Ardelean1-1/+0
During commit 067fda1c065ff ("iio: hid-sensors: move triggered buffer setup into hid_sensor_setup_trigger"), the iio_triggered_buffer_{setup,cleanup}() functions got moved under the hid-sensor-trigger module. The above change works fine, if any of the sensors get built. However, when only the common hid-sensor-trigger module gets built (and none of the drivers), then the IIO_TRIGGERED_BUFFER symbol isn't selected/enforced. Previously, each driver would enforce/select the IIO_TRIGGERED_BUFFER symbol. With this change the HID_SENSOR_IIO_TRIGGER (for the hid-sensor-trigger module) will enforce that IIO_TRIGGERED_BUFFER gets selected. All HID sensor drivers select the HID_SENSOR_IIO_TRIGGER symbol. So, this change removes the IIO_TRIGGERED_BUFFER enforcement from each driver. Fixes: 067fda1c065ff ("iio: hid-sensors: move triggered buffer setup into hid_sensor_setup_trigger") Reported-by: Thomas Deutschmann <whissi@gentoo.org> Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Link: https://lore.kernel.org/r/20210414084955.260117-1-aardelean@deviqon.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-03-29iio:accel:adis16201: Fix wrong axis assignment that prevents loadingJonathan Cameron1-1/+1
Whilst running some basic tests as part of writing up the dt-bindings for this driver (to follow), it became clear it doesn't actually load currently. iio iio:device1: tried to double register : in_incli_x_index adis16201 spi0.0: Failed to create buffer sysfs interfaces adis16201: probe of spi0.0 failed with error -16 Looks like a cut and paste / update bug. Fixes tag obviously not accurate but we don't want to bother carry thing back to before the driver moved out of staging. Fixes: 591298e54cea ("Staging: iio: accel: adis16201: Move adis16201 driver out of staging") Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: <Stable@vger.kernel.org> Cc: Himanshu Jha <himanshujha199640@gmail.com> Cc: Nuno Sá <nuno.sa@analog.com> Reviewed-by: Alexandru Ardelean <ardeleanalex@gmail.com> Link: https://lore.kernel.org/r/20210321182956.844652-1-jic23@kernel.org
2021-03-25iio: cros: unify hw fifo attributes without API changesGwendal Grignou1-1/+1
Commit 2e2366c2d141 ("iio: cros_ec: unify hw fifo attributes into the core file") should be reverted as it set buffer extended attributes at the wrong place. However, to revert it will requires to revert more commits: commit 165aea80e2e2 ("iio: cros_ec: use devm_iio_triggered_buffer_setup_ext()") commit 21232b4456ba ("iio: buffer: remove iio_buffer_set_attrs() helper")). and we would still have conflict with more recent development. commit ee708e6baacd ("iio: buffer: introduce support for attaching more IIO buffers") Instead, this commit reverts the first 2 commits without re-adding iio_buffer_set_attrs() and set the buffer extended attributes at the right place: 1. Instead of adding has_fw_fifo, deduct it from the configuration: - EC must support FIFO (EC_FEATURE_MOTION_SENSE_FIFO) set. - sensors send data a regular interval (accelerometer, gyro, magnetomer, barometer, light sensor). - "Legacy accelerometer" is only present on EC without FIFO, so we don't need to set buffer attributes. 2. devm_iio_triggered_buffer_setup_ext() does not need to be called when EC does not support FIFO, as there is no FIFO to manage. 3. Use devm_iio_triggered_buffer_setup_ext() when EC has a FIFO to specify the buffer extended attributes. Fixes: 2e2366c2d141 ("iio: cros_ec: unify hw fifo attributes into the core file") Fixes: 165aea80e2e2 ("iio: cros_ec: use devm_iio_triggered_buffer_setup_ext()") Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Reviewed-by: Alexandru Ardelean <ardeleanalex@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20210318184857.2679181-1-gwendal@chromium.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-03-25iio: accel: sca3000: kernel-doc fixes. Missing - and wrong function names.Jonathan Cameron1-4/+4
All extremely obvious so nothing to add to patch title. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Alexandru Ardelean <ardeleanalex@gmail.com> Reviewed-by: Lars-Peter Clausen <lars@metafoo.de> Link: https://lore.kernel.org/r/20210314164655.408461-8-jic23@kernel.org
2021-03-25iio: fix devm_iio_trigger_alloc with parent.cocciGwendal Grignou7-9/+0
Use cocci semantic patch: @@ expression trigger, P; @@ trigger = devm_iio_trigger_alloc(P, ...); ... - trigger->dev.parent = P; To remove trigger->dev.parent, since it is set by default. Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20210309193620.2176163-3-gwendal@chromium.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-03-25iio: set default trig->dev.parentGwendal Grignou1-2/+1
When allocated with [devm_]iio_trigger_alloc(), set trig device parent to the device the trigger is allocated for by default. It can always be reassigned in the probe routine. Change iio_trigger_alloc() API to add the device pointer to be coherent with devm_iio_trigger_alloc, using similar interface to iio_device_alloc(). Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20210309193620.2176163-2-gwendal@chromium.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-03-25iio: Remove kernel-doc keyword in file header commentGwendal Grignou8-8/+8
Remove kernel-doc keyword from function header comment. It fixes issues spotted by scripts/kernel-doc like: drivers/iio/<driver>.c:3: info: Scanning doc for function <component name> drivers/iio/<driver>.c:X: warning: expecting prototype for <component name>. Prototype was for <function>() instead To reproduce the errors: scripts/kernel-doc -v -none $(find drivers/iio/ -name \*.c \ -exec head -2 {} \+ | grep -B2 -e '\*\*' | grep '==' | cut -d ' ' -f 2) After, confirm these errors are gone with: scripts/kernel-doc -v -none $(git show --name-only | grep -e "^driver") Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Link: https://lore.kernel.org/r/20210309234314.2208256-1-gwendal@chromium.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-03-25iio: accel: mma8452: fix indentationSean Nyekjaer1-23/+23
Improve readability by fixing indentation. Signed-off-by: Sean Nyekjaer <sean@geanix.com> Link: https://lore.kernel.org/r/20210301080029.1974797-1-sean@geanix.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-03-11iio: hid-sensors: Move get sensitivity attribute to hid-sensor-commonYe Xiang1-14/+9
No functional change has been made with this patch. The main intent here is to reduce code repetition of getting sensitivity attribute. In the current implementation, sensor_hub_input_get_attribute_info() is called from multiple drivers to get attribute info for sensitivity field. Moving this to common place will avoid code repetition. Signed-off-by: Ye Xiang <xiang.ye@intel.com> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210201054921.18214-2-xiang.ye@intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-03-11iio: accel: sca3000: use devm_iio_kfifo_buffer_setup() helperAlexandru Ardelean1-16/+3
This change makes use of the devm_iio_kfifo_buffer_setup() helper, however the unwind order is changed. The life-time of the kfifo object is attached to the parent device object. This is to make the driver a bit more consistent with the other IIO drivers, even though (as it is now before this change) it shouldn't be a problem. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Link: https://lore.kernel.org/r/20210215104043.91251-5-alexandru.ardelean@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-03-11iio: make use of devm_iio_kfifo_buffer_setup() helperAlexandru Ardelean1-9/+5
All drivers that already call devm_iio_kfifo_allocate() & iio_device_attach_buffer() are simple to convert to iio_device_attach_kfifo_buffer() in a single go. This change does that; the unwind order is preserved. What is important, is that the devm_iio_kfifo_buffer_setup() be called after the indio_dev->modes is assigned, to make sure that INDIO_BUFFER_SOFTWARE flag is set and not overridden by the assignment to indio_dev->modes. Also, the INDIO_BUFFER_SOFTWARE has been removed from the assignments of 'indio_dev->modes' because it is set by devm_iio_kfifo_buffer_setup(). Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Reviewed-by: Gwendal Grignou <gwendal@chromium.org> Reviewed-by: Matt Ranostay <matt.ranostay@konsulko.com>x Link: https://lore.kernel.org/r/20210215104043.91251-4-alexandru.ardelean@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-03-11iio: accel: kxcjk-1013: Set label based on accel-location on 2-accel ↵Hans de Goede1-4/+10
yoga-style 2-in-1s Some 2-in-1 laptops / convertibles with 360° (yoga-style) hinges, use 2 KXCJ91008 accelerometers: 1 in their display using an ACPI HID of "KIOX010A"; and 1 in their base using an ACPI HID of "KIOX020A" Since in this case we know the location of each accelerometer, set the label for the accelerometers to the standardized "accel-display" resp. "accel-base" labels. This way userspace can use the labels to get the location. This was tested on a Medion Akoya E2228T MD60250. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20210207160901.110643-4-hdegoede@redhat.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-03-11iio: accel: bmc150: Set label based on accel-location on 2-accel yoga-style ↵Hans de Goede1-6/+12
2-in-1s Some 2-in-1 laptops / convertibles with 360° (yoga-style) hinges, use 2 bmc150 accelerometers, defined by a single BOSC0200 ACPI device node (1 in their base and 1 in their display). Since in this case we know the location of each accelerometer, set the label for the accelerometers to the standardized "accel-display" resp. "accel-base" labels. This way userspace can use the labels to get the location. This was tested on a Lenovo ThinkPad Yoga 11e 4th gen (N3450 CPU). Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20210207160901.110643-3-hdegoede@redhat.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-03-11iio: accel: Add support for the Bosch-Sensortec BMI088Mike Looijmans5-0/+688
The BMI088 is a combined module with both accelerometer and gyroscope. This adds the accelerometer driver support for the SPI interface. The gyroscope part is already supported by the BMG160 driver. Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210125150732.23873-2-mike.looijmans@topic.nl Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-01-22iio: hid-sensor-accel-3d: Add timestamp channel for gravity sensorYe Xiang1-2/+4
The accel_3d sensor already has a timestamp channel, this patch just replicate that for gravity sensor. Signed-off-by: Ye Xiang <xiang.ye@intel.com> Link: https://lore.kernel.org/r/20210105093515.19135-2-xiang.ye@intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-01-22iio: accel: kxcjk1013: Add rudimentary regulator supportDevajith V S1-0/+32
kxcjk1013 devices have VDD and VDDIO power lines. Need to make sure the regulators are enabled before any communication with kxcjk1013. This patch introduces vdd/vddio regulators for kxcjk1013. Signed-off-by: Devajith V S <devajithvs@gmail.com> Link: https://lore.kernel.org/r/20201213172437.2779-2-devajithvs@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-12-03iio: accel: bmc150: Get mount-matrix from ACPIHans de Goede1-4/+104
bmc150 accelerometers with an ACPI hardware-id of BOSC0200 have an ACPI method providing their mount-matrix, add support for retrieving this. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20201130141954.339805-3-hdegoede@redhat.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-12-03iio: accel: bmc150: Check for a second ACPI device for BOSC0200Jeremy Cline3-2/+62
Some BOSC0200 acpi_device-s describe two accelerometers in a single ACPI device. Normally we would handle this by letting the special drivers/platform/x86/i2c-multi-instantiate.c driver handle the BOSC0200 ACPI id and let it instantiate 2 bmc150_accel type i2c_client-s for us. But doing so changes the modalias for the first accelerometer (which is already supported and used on many devices) from acpi:BOSC0200 to i2c:bmc150_accel. The modalias is not only used to load the driver, but is also used by hwdb matches in /lib/udev/hwdb.d/60-sensor.hwdb which provide a mountmatrix to userspace by setting the ACCEL_MOUNT_MATRIX udev property. Switching the handling of the BOSC0200 over to i2c-multi-instantiate.c will break the hwdb matches causing the ACCEL_MOUNT_MATRIX udev prop to no longer be set. So switching over to i2c-multi-instantiate.c is not an option. Changes by Hans de Goede: -Add explanation to the commit message why i2c-multi-instantiate.c cannot be used -Also set the dev_name, fwnode and irq i2c_board_info struct members for the 2nd client Signed-off-by: Jeremy Cline <jeremy@jcline.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20201130141954.339805-2-hdegoede@redhat.com BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=198671 Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-12-03iio: accel: bmc150: Removed unused bmc150_accel_dat irq memberHans de Goede1-5/+2
The bmc150_accel_dat struct irq member is only ever used inside bmc150_accel_core_probe, drop it and just use the function argument directly. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20201130141954.339805-1-hdegoede@redhat.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-12-03iio:trigger: rename try_reenable() to reenable() plus return voidJonathan Cameron4-28/+19
As we no longer support a try again if we cannot reenable the trigger rename the function to reflect this. Also we don't do anything with the value returned so stop it returning anything. For the few drivers that didn't already print an error message in this patch, add such a print. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Cc: Christian Oder <me@myself5.de> Cc: Eugen Hristev <eugen.hristev@microchip.com> Cc: Nishant Malpani <nish.malpani25@gmail.com> Cc: Daniel Baluta <daniel.baluta@oss.nxp.com> Link: https://lore.kernel.org/r/20200920132548.196452-3-jic23@kernel.org
2020-12-03iio: accel: bmc150-accel: Add rudimentary regulator supportLinus Walleij1-2/+33
These Bosch accelerometers have two supplies, VDD and VDDIO. Add some rudimentary support to obtain and enable these regulators during probe() and disable them during remove() or on the errorpath. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20201115205745.618455-3-linus.walleij@linaro.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-12-03iio: accel: bmc150-accel: Add support for BMA222Linus Walleij4-0/+22
This adds support for the BMA222 version of this sensor, found in for example the Samsung GT-I9070 mobile phone. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20201115205745.618455-2-linus.walleij@linaro.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-11-24Merge tag 'iio-for-5.11a' of ↵Greg Kroah-Hartman5-20/+20
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: First set of new device support, features and cleanups for IIO in the 5.11 cycle Usual mixed bag of new drivers / device support + cleanups etc with the addition of a fairly big set of yaml conversions. Txt to yaml format conversions. In some cases dropped separate binding and moved to trivial devices (drop). Listed by manufacturer - dht11 temperature(drop) - adi,ad2s90 adi,ad5272 adi,ad5592r adi,ad5758 adi,ad5933 adi,ad7303 adi,adis16480 adi,adf4350 - ams,as3935 - asahi-kasei,ak8974 - atmel,sama5d2-adc - avago,apds9300 avago,apds9960 - bosch,bma180 bosch,bmc150_magn bosch,bme680 bosch,bmg180 - brcm,iproc-static-adc - capella,cm36651 - domintech,dmard06(drop) - fsl,mag3110 fsl,mma8452 fsl,vf610-dac - hoperf,hp03 - honeywell,hmc5843 - kionix,kxcjk1013 - maxim,ds1803(drop) maxim,ds4424 maxim,max30100 maxim,max30102 maxim,max31856 maxim,max31855k maxim,max44009 maxim,max5481 maxim,max5821 - meas,htu21(drop) meas,ms5367(drop) meas,ms5611 meas,tsys01(drop) - mediatek,mt2701-auxadc - melexis,mlx90614 melexis,mlx90632 - memsic,mmc35240(drop) - microchip,mcp41010 microchip,mcp4131 microchip,mcp4725 - murata,zap2326 - nxp,fxas21002c nxp,lpc1850-dac - pni,rm3100 - qcom,pm8018-adc qcom,spmi-iadc - renesas,isl29501 renesas,rcar-gyroadc - samsung,sensorhub-rinato - sensiron,sgp30 - sentech,sx9500 - sharp,gp2ap020a00f - st,hts221 st,lsm6dsx st,st-sensors(many!) st,uvis25 st,vcl53l0x st,vl6180 - ti,adc084s021 ti,ads124s08 ti,dac5571 ti,dac7311 ti,dac7512 ti,dac7612 ti,hdc1000(drop) ti,palmas-gpadc ti,opt3001 ti,tmp07 - upisemi,us51882 - vishay,vcnl4035 - x-powers,axp209 New device support * adi,ad5685 - Add support for AD5338R dual output 10-bit DAC - Add DT-binding doc. * mediatek,mt6360 - New driver for this SoC ADC with bindings and using new channel label support in the IIO core. * st,lsm6dsx - Add support for LSM6DST Core: * Add "label" to device channels, provided via a new core callback. Including DT docs for when that is the source, and ABI docs. * Add devm_iio_triggered_buffer_setup_ext to take extra attributes. * dmaengine, unwrap use of iio_buffer_set_attrs() * Drop iio_buffer_set_attrs() * Centralize ioctl call handling. Later fix to ensure -EINVAL returned if no handler has run. * Fix an issue with IIO_VAL_FRACTIONAL and negative values - doesn't affect any known existing drivers, but will impact a future one. * kernel-doc fix in trigger.h * file-ops ordering cleanup Features * semtech,sx9310 - Add control of hardware gain, proximity thresholds, hysteresis and debounce. - Increase what information on hardware configuration can be provided via DT. Cleanup and minor features * adi,ad5685 - Add of_match_table * adi,ad7292 - Drop pointless spi_set_drvdata() call * adi,ad7298 - Drop platform data and tidy up external reference config. * adi,ad7303 - Drop platform data handling as unused. * adi,ad7768 - Add new label attribute for channels provided from dt. * adi,ad7887 - devm_ usage in probe simplifying remove and error handling. * adi,adis16201 - Drop pointless spi_set_drvdata() call * adi,adis16209 - Drop pointless spi_set_drvdata() call * adi,adis16240 - White space fixup * adi,adxl372 - use new devm_iio_triggered-buffer_setup_ext() * amlogic,meson-saradc - Drop pointless semicolon. * amstaos,tsl2563 - Put back i2c_device_id table as needed for greybus probing. * atmel,at91_adc - Use of_device_get_match_data() instead of open coding it. - Constify some driver data - Add KCONFIG dep on CONFIG_OF and drop of_match_ptr() - Drop platform data as mostly dead code. - Tidy up reference voltage logic * atmel-sama5d2 - Drop a pointless semicolon - Merge buffer and trigger init into a separate function - Use new devm_iio_triggered_buff_setup_ext() * avago,apds9960 - Drop a pointless semicolon * bosch,bmc150 - Drop a pointless semicolon - Use new iio_triggered_buffer_setup_ext() * bosch,bmp280 - Drop a pointless semicolon * fsl,mma8452 - Constification * (google),cros_ec - Use new devm_iio_triggered_buffer_setup_ext() * hid-sensors - Use new iio_triggered_buffer_setup_ext() * ingenic,adc - Drop a pointless semicolon * invensense,icm426xx - Fix MAINTAINERS entry missing : * mediatek,mt6577_audxac - Add binding doc for mt8516 compatible with mt8173 * motorola,cpcap-adc - Fix an implicit fallthrough marking that clang needs to avoid warning. * samsung,exynos-adc - Stop relying on users counter form input device in ISR. * st,lsm6dsx - add vdd and vddio regulator control (including binding update) * st,stm32-adc - Tidy up code for dma transfers. - Adapt clock duty cycle for proper functioning. Note no known problems with existing boards. * st,vl53l0x-i2c - Put back i2c_device_id table as needed for greybus probing. * vishay,vcnl4035 - Put back i2c_device_id table as needed for greybus probing. * tag 'iio-for-5.11a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (126 commits) dt-bindings:iio:adc:x-powers,axp209-adc: txt to yaml conversion dt-bindings:iio:adc:renesas,rcar-gyroadc: txt to yaml conversion. dt-bindings:iio:adc:atmel,sama5d2-adc: txt to yaml conversion dt-bindings:iio:magnetometer:pni,rm3100: txt to yaml conversion. dt-bindings:iio:magnetometer:honeywell,hmc5843: txt to yaml format conversion dt-bindings:iio:magnetometer:bosch,bmc150_magn: txt to yaml conversion. dt-bindings:iio:magnetometer:asahi-kasei,ak8974: txt to yaml format conversion dt-bindings:iio:magnetometer:fsl,mag3110: txt to yaml conversion dt-bindings:iio:light:st,vl6180: txt to yaml format conversion. dt-bindings:iio:light:vishay,vcnl4035: txt to yaml conversion dt-bindings:iio:light:st,uvis25: txt to yaml conversion for this UV sensor dt-bindings:iio:light:upisemi,us51882: txt to yaml conversion. dt-bindings:iio:light:ti,opt3001: txt to yaml conversion dt-bindings:iio:light:maxim,max44009: txt to yaml conversion. dt-bindings:iio:light:sharp,gp2ap020a00f: txt to yaml conversion. dt-bindings:iio:light:capella,cm36651: txt to yaml conversion. dt-bindings:iio:light:avago,apds9960: txt to yaml conversion dt-bindings:iio:light:avago,apds9300: txt to yaml conversion. dt-bindings:iio:imu:st,lsm6dsx: txt to yaml conversion dt-bindings:iio:imu:adi,adis16480: txt to yaml conversion ...
2020-11-21iio: accel: adis16209: remove unneeded spi_set_drvdata()Alexandru Ardelean1-1/+0
There is no matching spi_get_drvdata() in the driver. This looks like a left-over from before the driver was converted to device-managed functions. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Link: https://lore.kernel.org/r/20201119141806.84827-1-alexandru.ardelean@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-11-21iio: accel: adis16201: remove unneeded spi_set_drvdata()Alexandru Ardelean1-1/+0
There is no matching spi_get_drvdata() in the driver. This looks like a left-over from before the driver was converted to device-managed functions. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Link: https://lore.kernel.org/r/20201119141729.84185-1-alexandru.ardelean@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-11-21iio: accel: bmc150: use iio_triggered_buffer_setup_ext()Alexandru Ardelean1-11/+14
This change switches to the new iio_triggered_buffer_setup_ext() function and removes the iio_buffer_set_attrs() call, for assigning the HW FIFO attributes to the buffer. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20200929125949.69934-6-alexandru.ardelean@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-11-21iio: accel: adxl372: use devm_iio_triggered_buffer_setup_ext()Alexandru Ardelean1-6/+5
This change switches to the new devm_iio_triggered_buffer_setup_ext() function and removes the iio_buffer_set_attrs() call, for assigning the HW FIFO attributes to the buffer. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20200929125949.69934-5-alexandru.ardelean@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-11-14iio: accel: kxcjk1013: Add support for KIOX010A ACPI DSM for setting tablet-modeHans de Goede1-0/+36
Some 360 degree hinges (yoga) style 2-in-1 devices use 2 KXCJ91008-s to allow the OS to determine the angle between the display and the base of the device, so that the OS can determine if the 2-in-1 is in laptop or in tablet-mode. On Windows both accelerometers are read by a special HingeAngleService process; and this process calls a DSM (Device Specific Method) on the ACPI KIOX010A device node for the sensor in the display, to let the embedded-controller (EC) know about the mode so that it can disable the kbd and touchpad to avoid spurious input while folded into tablet-mode. This notifying of the EC is problematic because sometimes the EC comes up thinking that device is in tablet-mode and the kbd and touchpad do not work. This happens for example on Irbis NB111 devices after a suspend / resume cycle (after a complete battery drain / hard reset without having booted Windows at least once). Other 2-in-1s which are likely affected too are e.g. the Teclast F5 and F6 series. The kxcjk-1013 driver may seem like a strange place to deal with this, but since it is *the* driver for the ACPI KIOX010A device, it is also the driver which has access to the ACPI handle needed by the DSM. Add support for calling the DSM and on probe unconditionally tell the EC that the device is laptop mode, fixing the kbd and touchpad sometimes not working. Fixes: 7f6232e69539 ("iio: accel: kxcjk1013: Add KIOX010A ACPI Hardware-ID") Reported-and-tested-by: russianneuromancer <russianneuromancer@ya.ru> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Cc: <Stable@vger.kernel.org> Link: https://lore.kernel.org/r/20201110133835.129080-3-hdegoede@redhat.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-11-14iio: accel: kxcjk1013: Replace is_smo8500_device with an acpi_type enumHans de Goede1-5/+10
Replace the boolean is_smo8500_device variable with an acpi_type enum. For now this can be either ACPI_GENERIC or ACPI_SMO8500, this is a preparation patch for adding special handling for the KIOX010A ACPI HID, which will add a ACPI_KIOX010A acpi_type to the introduced enum. For stable as needed as precursor for next patch. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Fixes: 7f6232e69539 ("iio: accel: kxcjk1013: Add KIOX010A ACPI Hardware-ID") Cc: <Stable@vger.kernel.org> Link: https://lore.kernel.org/r/20201110133835.129080-2-hdegoede@redhat.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-10-10iio: accel: mma8452: Constify static struct attribute_groupRikard Falkeborn1-1/+1
The only usage of mma8452_event_attribute_group is to assign its address to the event_attrs field in the iio_info struct, which is a const pointer. Make it const to allow the compiler to put it in read-only memory. This was the only non-const static struct in drivers/iio. Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Link: https://lore.kernel.org/r/20200930232939.31131-1-rikard.falkeborn@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-09-29iio: cros_ec: unify hw fifo attributes into the core fileAlexandru Ardelean1-1/+1
The intent here is to minimize the use of iio_buffer_set_attrs(). Since we are planning to add support for multiple IIO buffers per IIO device, the issue has to do with: 1. Accessing 'indio_dev->buffer' directly (as is done with 'iio_buffer_set_attrs(indio_dev->buffer, <attrs>)'). 2. The way that the buffer attributes would get handled or expanded when there are more buffers per IIO device. Current a sysfs kobj_type expands into a 'device' object that expands into an 'iio_dev' object. We will need to change this, so that the sysfs attributes for IIO buffers expand into IIO buffers at some point. Right now, the current IIO framework works fine for the '1 IIO device == 1 IIO buffer' case (that is now). Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Reviewed-by: Guenter Roeck <groeck@chromium.org> Link: https://lore.kernel.org/r/20200923130339.997902-1-alexandru.ardelean@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-09-22Merge tag 'iio-for-5.10b-take2' of ↵Greg Kroah-Hartman3-46/+7
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: Second set of features and cleanups for IIO in 5.10 We have a couple of changes that apply to large sets of drivers, so I have grouped those to keep this short. There are a few late breaking fixes in here that can wait for the merge window. dt yaml conversions ------------------- * adi,ad7768-1 * adi,ad7949 * aspeed,ast2400 * cosmic,10001-adc * dlg,da9150-gpadc * fsl,imx25-gcq * fsl,imx7d-adc * fsl,vf610 * holt,hi8435 * marvell,berlin2-adc * motorola,cpcap-adc * nuvoton,nau7802 * nuvoton,npcm750-adc * nxp,lpc1850-adc * nxp,lpc3220 * sprd,sc2720-adc * st,stmpe-adc * ti,adc12138 * ti,ads1015 * ti,ads7950 * ti,twl4030-madc Features -------- * adxrs290 - Add triggered buffer support and expose data ready signal as a possible trigger. Includes updating bindings. - Add debugfs hooks for register access. * mlx90632 - Add a clear user interface to override the measured ambient temperature. * vl53l0x - Add IRQ support including dt bindings. Cleanups and minor fixes ------------------------ (groups) Replace mlock with local lock: * adf4350 * exynos-adc * fls-imx25-gcq * stm32-dac devm use to simplify probe error handling and remove functions. * adis16201 * adis16203 * adis16209 * adis16240 * adis16136 * adis16260 * adis16400 * adis16460 * adis16480 * adis library - drop unused adis_setup_buffer_and_trigger() of_match_ptr removal and incorrect ACPI binding removal of_match_ptr() rarely makes sense in an IIO driver as space saving is trivial and it breaks ACPI PRP0001 based instantiation. Mostly this series is about removing examples that get copied into new drivers. * ad2s1200 * ad5272 * ad5446 * ad5592r * ad5593r * ad5703 * ak8974 * ak8975 * ams-iaq-core * as3935 * atlas-sensor * ds1803 * hdc100x * htu21 * icp10100 * lmp91000 * pulsedlight * max30102 * max5432 * max5481 * mcp4018 * mcp4131 * mcp4531 * mcp4725 * ms5611 * ms5637 * si7020 * sgp30 * ti-dac082s085 * ti-dac5571 * tmp007 * tsys01 * vz89x * zpa2326 kernel-doc fixes * iio-core * ad7303 * ad7947 * adis16080 * adis16400 * iio_dummy_evgen * sgp30 Fixes for buffer alignment when passed to iio_push_to_buffers_with_timestamp() This is a long running effort. There are a few more drivers to come. * inv_mpu6050 * itg3200 * si1145 * st_lsm6dsx * ti-adc0832 * ti-adc12138 (not driver focused) * MAINTAINERS - Consolidate Analog Device IIO entries whilst removing Beniamin Bia. - Remove Hartmut Knaack as a listed IIO maintainer as he hasn't been active for a long time and people are getting intermitted bounces. * Add __printf() markings to a few functions that were missing them. * drop some rotted documentation from staging. * rework buffer sysfs file creation (precursor to multiple buffer support) (individual drivers) * ad5592r - Fix use of true for IIO_SHARED_BY_TYPE - Tidy up locking and indentation. * ad9467 - Improve error message on chip-id missmatch. - Use more appropriate error value if chip-id not recognised. * adis-library - Simplify burst mode handling. * adxrs290 - Make sure to switch device to standby mode during remove. * as73211 - Increase measurement timeout as seems some devices are slower. * bma180 - Fix use of true fo IIO_SHARED_BY_TYPE * exynos_adc - Update binding to require second interrut with touch screen. - Update binding to not require syscon on S5Pv210 * hmc5843 - Fix use of true for IIO_SHARED_BY_TYPE * inv_mpu6050 - Use regmap_noinc_read() for fifo reading. * palmas_gpadc - Use module_platform_driver() to remove boilerplate. * meson-saradc - style consistency fixes * rockchip_saradc - Allow compile testing with !ARM. * st_lsm6dsx - Changing scaling factor to use IIO_VAL_INT_PLUS_NANO to improve precision. - Fix an issue with unchecked return value. * stm32-adc - Fix a missing return introduced in dev_err_probe() patch earlier in cycle. * sx9310 - Prefer async mode for probe as paticularly slow startup. * vcnl4000 - Add missing interrupt property to dt binding. * tag 'iio-for-5.10b-take2' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (126 commits) dt-bindings: iio: vishay,vcnl4000: add interrupts property iio:imu:inv_mpu6050: Use regmap_noinc_read for fifo reads. iio:imu:inv_mpu6050 Fix dma and ts alignment and data leak issues. iio:adc:ti-adc12138 Fix alignment issue with timestamp iio:adc:ti-adc0832 Fix alignment issue with timestamp iio:imu:st_lsm6dsx Fix alignment and data leak issues iio:light:si1145: Fix timestamp alignment and prevent data leak. iio:gyro:itg3200: Fix timestamp alignment and prevent data leak. iio:imu:st_lsm6dsx: check st_lsm6dsx_shub_read_output return iio: adc: exynos_adc: Replace indio_dev->mlock with own device lock dt-bindings:iio:adc:holt,hi8435 yaml conversion dt-bindings:iio:adc:adi,ad7768-1 yaml conversion dt-bindings:iio:adc:adi,ad7949 yaml conversion dt-bindings:iio:adc:dlg,da9150-gpadc yaml conversion dt-bindings:iio:adc:motorola,cpcap-adc yaml conversion dt-bindings:iio:adc:nxp,lpc3220-adc yaml conversion dt-bindings:iio:adc:nxp,lpc1850-adc yaml conversion dt-bindings:iio:adc:fsl,imx25-gcq yaml conversion dt-bindings:iio:adc:fsl,imx7d-adc yaml conversion dt-bindings:iio:adc:ti,ads1015 yaml conversion ...
2020-09-21iio:accel:bma180: Fix use of true when should be iio_shared_by enumJonathan Cameron1-1/+1
Given a value of 1 corresponds to IIO_SHARE_BY_TYPE I have replaced it with that. Should cause no functional change. Fixes: fdadbce0da42 ("iio: add Bosch BMA180 acceleration sensor driver") Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Matt Ranostay <matt.ranostay@konsulko.com> Reviewed-by: Lars-Peter Clausen <lars@metafoo.de> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Oleksandr Kravchenko <o.v.kravchenko@globallogic.com> Cc: Peter Meerwald <pmeerw@pmeerw.net> Cc: Jonathan Bakker <xc-racer2@live.ca> Link: https://lore.kernel.org/r/20200913121227.764626-1-jic23@kernel.org
2020-09-16iio: adis16209: Use Managed device functionsNuno Sá1-22/+3
Use the adis managed device functions to setup the buffer and the trigger. The ultimate goal will be to completely drop the non devm version from the lib. Since we are here, drop the `.remove` callback by further using devm functions. Signed-off-by: Nuno Sá <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20200915120258.161587-3-nuno.sa@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-09-16iio: adis16201: Use Managed device functionsNuno Sá1-23/+3
Use the adis managed device functions to setup the buffer and the trigger. The ultimate goal will be to completely drop the non devm version from the lib. Since we are here, drop the `.remove` callback by further using devm functions. Signed-off-by: Nuno Sá <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20200915120258.161587-2-nuno.sa@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-09-14Merge 5.9-rc5 into staging-nextGreg Kroah-Hartman4-16/+44
We want the staging/iio changes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-13Merge tag 'staging-5.9-rc5' of ↵Linus Torvalds4-15/+43
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging/IIO driver fixes from Greg KH: "Here are a number of staging and IIO driver fixes for 5.9-rc5. The majority of these are IIO driver fixes, to resolve a timestamp issue that was recently found to affect a bunch of IIO drivers. The other fixes in here are: - small IIO driver fixes - greybus driver fix - counter driver fix (came in through the IIO fixes tree) All of these have been in linux-next for a while with no reported issues" * tag 'staging-5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (23 commits) iio: adc: mcp3422: fix locking on error path iio: adc: mcp3422: fix locking scope iio: adc: meson-saradc: Use the parent device to look up the calib data iio:adc:max1118 Fix alignment of timestamp and data leak issues iio:adc:ina2xx Fix timestamp alignment issue. iio:adc:ti-adc084s021 Fix alignment and data leak issues. iio:adc:ti-adc081c Fix alignment and data leak issues iio:magnetometer:ak8975 Fix alignment and data leak issues. iio:light:ltr501 Fix timestamp alignment issue. iio:light:max44000 Fix timestamp alignment and prevent data leak. iio:chemical:ccs811: Fix timestamp alignment and prevent data leak. iio:proximity:mb1232: Fix timestamp alignment and prevent data leak. iio:accel:mma7455: Fix timestamp alignment and prevent data leak. iio:accel:bmc150-accel: Fix timestamp alignment and prevent data leak. iio:accel:mma8452: Fix timestamp alignment and prevent data leak. iio: accel: kxsd9: Fix alignment of local buffer. iio: adc: rockchip_saradc: select IIO_TRIGGERED_BUFFER iio: adc: ti-ads1015: fix conversion when CONFIG_PM is not set counter: microchip-tcb-capture: check the correct variable iio: cros_ec: Set Gyroscope default frequency to 25Hz ...
2020-09-03iio: accel: bma220: Remove unneeded blank linesAndy Shevchenko1-4/+1
There are few blank lines that split structure definitions with their users. Remove them to increase readability. While here, update copyright year. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20200831090813.78841-8-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-09-03iio: accel: bma220: Use BIT() and GENMASK() macrosAndy Shevchenko1-2/+3
Code is better to read when numbers of bit are explicitly used. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20200831090813.78841-7-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-09-03iio: accel: bma220: Group IIO headers togetherAndy Shevchenko1-1/+2
Group IIO headers together and follow the common pattern of header inclusion, i.e. more generic first. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20200831090813.78841-6-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-09-03iio: accel: bma220: Drop ACPI_PTR() and accompanying ifdefferyAndy Shevchenko1-4/+2
The driver is quite likely used only on ACPI based platforms and rarely build with CONFIG_ACPI=n. Even though, the few dozens of bytes is better than ugly ifdeffery and inclusion of heavy header. As a result, replace acpi.h with mod_devicetable.h. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20200831090813.78841-5-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-09-03iio: accel: bma220: Mark PM functions as __maybe_unusedAndy Shevchenko1-9/+3
Instead of using ugly ifdeffery, mark PM functions as __maybe_unused. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20200831090813.78841-4-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-09-03iio: accel: bma220: Use dev_get_drvdata() directlyAndy Shevchenko1-4/+2
Instead of using to_spi_dev() + spi_get_drvdata(), use dev_get_drvdata() to make code simpler. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20200831090813.78841-3-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-09-03iio: accel: bma220: Convert to use ->read_avail()Andy Shevchenko1-15/+19
Convert to use ->read_avail() instead of open-coded attribute handling. While here, fix the typo in array definition and append comma in case of the future extension. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20200831090813.78841-2-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-09-03iio: accel: bma220: Fix returned codes from bma220_init(), bma220_deinit()Andy Shevchenko1-5/+9
Potentially bma220_init() and bma220_deinit() may return positive codes. Fix the logic to return proper error codes instead. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20200831090813.78841-1-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-09-03iio: accel: adxl372: Add support for FIFO peak modeStefan Popa1-12/+299
By default, if all three channels (x, y, z) are enabled, sample sets of concurrent 3-axis data is stored in the FIFO. This patch adds the option to configure the FIFO to store peak acceleration (x, y and z) of every over-threshold event. When pushing to iio buffer we push only enabled axis data. Currently the driver configures adxl372 to work in loop mode. The inactivity and activity timings decide how fast the chip will loop through the awake and waiting states and the thresholds on x,y,z axis decide when activity or inactivity will be detected. This patch adds standard events sysfs entries for the inactivity and activity timings: thresh_falling_period/thresh_rising_period and for the in_accel_x_thresh_falling/rising_value. Signed-off-by: Stefan Popa <stefan.popa@analog.com> Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com> Link: https://lore.kernel.org/r/20200810093257.65929-2-alexandru.tachici@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-23 07:58:00 +0300