summaryrefslogtreecommitdiff
path: root/drivers/ide/alim15x3.c
AgeCommit message (Collapse)AuthorFilesLines
2021-06-16ide: remove the legacy ide driverChristoph Hellwig1-602/+0
The legay ide driver has been replace with libata starting in 2003 and has been scheduled for removal for a while. Finally kill it off so that we can start cleaning up various bits of cruft it forced on the block layer. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-06-05alim15x3: move irq-restore before pci_dev_put()Sebastian Andrzej Siewior1-1/+1
init_chipset_ali15x3() initializes the chipset during init with disabled interrupts. There is no need to keep the interrupts disabled during pci_dev_put(). Move the irq-restore before pci_dev_put() is invoked. Side note: The same init is performed in drivers/ata/pata_ali.c::ali_init_chipset() without disabled interrupts. It looks that the same hardware is supported in the ATA land. Would it make sense to remove this driver since it is supported in the other subsystem? Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-04Drivers: ide: remove __dev* attributes.Greg Kroah-Hartman1-5/+5
CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-05sections: fix section conflicts in drivers/ideAndi Kleen1-1/+1
Signed-off-by: Andi Kleen <ak@linux.intel.com> Cc: David Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-01-19alim15x3: fix handling of UDMA enable bitBartlomiej Zolnierkiewicz1-25/+18
Clear UDMA enable bit also for PIO modes. Based on libata pata_ali host driver. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-19alim15x3: fix handling of DMA timingsBartlomiej Zolnierkiewicz1-16/+39
Stop depending on the BIOS setup. Based on libata pata_ali host driver. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-19alim15x3: fix handling of command timingsBartlomiej Zolnierkiewicz1-2/+7
Stop depending on the BIOS setup. Based on libata pata_ali host driver. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-19alim15x3: fix handling of address setup timingsBartlomiej Zolnierkiewicz1-0/+11
Account for the requirements of the other device on the port. Based on libata pata_ali host driver. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-19ide: change ->set_dma_mode method parametersBartlomiej Zolnierkiewicz1-3/+3
Change ->set_dma_mode method parameters to match ->set_dmamode method used in struct ata_port_operations. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2010-01-19ide: change ->set_pio_mode method parametersBartlomiej Zolnierkiewicz1-4/+3
Change ->set_pio_mode method parameters to match ->set_piomode method used in struct ata_port_operations. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-19alim15x3: cleanup ali_cable_detect()Bartlomiej Zolnierkiewicz1-8/+0
Remove leftover local_irq_[save,restore]() and FIXME note. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-19alim15x3: remove superfluous locking from ali_set_pio_mode()Bartlomiej Zolnierkiewicz1-5/+0
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-19alim15x3: add ali_fifo_control() helperBartlomiej Zolnierkiewicz1-16/+15
Based on libata pata_ali host driver. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-19alim15x3: fix PIO timings calculationsBartlomiej Zolnierkiewicz1-19/+15
Just use the standard ide_timing_compute() helper to calculate PIO timings. This fixes many issues with the open-coded version like potential recovery timings underclocking or not accounting for the enhanced cycle time specified by the device. Based on libata pata_ali host driver. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-03alim15x3: remove obsolete and dangerous wdc_udma parameterBartlomiej Zolnierkiewicz1-11/+1
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-04-30alim15x3: Remove historical hacks, re-enable init_hwif for PowerPCAnton Vorontsov1-7/+3
Some time ago we had to disable init_hwif callback for PowerPC builds. That was because of a historical IRQ overwrite in the driver, which was causing IDE malfunction on the MPC8610HPCD PowerPC boards. It's unclear whether this overwrite is still useful, but it is proven to cause a bit of harm, and today some PowerPC targets (Xilinx ML510, as reported by Roderick Colenbrander) need the init_hwif, so we have to re-enable it and remove the overwrite. Reported-by: Roderick Colenbrander <thunderbird2k@gmail.com> Suggested-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-31ide: add ->dma_check methodBartlomiej Zolnierkiewicz1-4/+5
* Add (an optional) ->dma_check method for checking if DMA can be used for a given command and fail DMA setup in ide_dma_prepare() if necessary. * Convert alim15x3 and trm290 host drivers to use ->dma_check. * Rename ali15x3_dma_setup() to ali_dma_check() while at it. There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-31ide: add ->dma_clear method and remove ->dma_timeout oneBartlomiej Zolnierkiewicz1-1/+0
All custom ->dma_timeout implementations call the generic one thus it is possible to have only an optional method for resetting DMA engine instead: * Add ->dma_clear method and convert hpt366, pdc202xx_old and sl82c105 host drivers to use it. * Always use ide_dma_timeout() in ide_dma_timeout_retry() and remove ->dma_timeout method. * Make ide_dma_timeout() static. There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-27ide: add ->dma_timer_expiry method and remove ->dma_exec_cmd one (v2)Bartlomiej Zolnierkiewicz1-1/+1
* Rename dma_timer_expiry() to ide_dma_sff_timer_expiry() and export it. * Add ->dma_timer_expiry method and use it to set hwif->expiry for ATA_PROT_DMA protocol in do_rw_taskfile(). * Initialize ->dma_timer_expiry to ide_dma_sff_timer_expiry() for SFF hosts. * Move setting hwif->expiry from ide_execute_command() to its users and drop 'expiry' argument. * Use ide_execute_command() instead of ->dma_exec_cmd in do_rw_taskfile(). * Remove ->dma_exec_cmd method and its implementations. * Unexport ide_execute_command() and ide_dma_intr(). v2: * Fix CONFIG_BLK_DEV_IDEDMA=n build (noticed by Randy Dunlap). * Fix *dma_expiry naming (suggested by Sergei Shtylyov). There should be no functional changes caused by this patch. Cc: Randy Dunlap <randy.dunlap@oracle.com> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-27ide: pass command to ide_map_sg()Bartlomiej Zolnierkiewicz1-3/+4
* Set IDE_TFLAG_WRITE flag and ->rq also for ATA_CMD_PACKET commands. * Pass command to ->dma_setup method and update all its implementations accordingly. * Pass command instead of request to ide_build_sglist(), *_build_dmatable() and ide_map_sg(). While at it: * Fix scc_dma_setup() documentation + use ATA_DMA_WR define. * Rename sgiioc4_build_dma_table() to sgiioc4_build_dmatable(), change return value type to 'int' and drop unused 'ddir' argument. * Do some minor cleanups in [tx4939]ide_dma_setup(). There should be no functional changes caused by this patch. Acked-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-25ide: fix ->init_chipset method to return 'int' valueBartlomiej Zolnierkiewicz1-1/+1
* Return 0 instead of dev->irq in ->init_chipset implementations. * Fix ->init_chipset method to return 'int' value instead of 'unsigned int' one. This fixes ->init_chipset handling for host drivers (cs5530, hpt366 and pdc202xx_new) for which it is possible for this method to fail. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-06ide: move read_sff_dma_status() method to 'struct ide_dma_ops'Sergei Shtylyov1-0/+1
Move apparently misplaced read_sff_dma_status() method from 'struct ide_tp_ops' to 'struct ide_dma_ops', renaming it to dma_sff_read_status() and making only required for SFF-8038i compatible IDE controller drivers (greatly cutting down the number of initializers) as its only user (outside ide-dma-sff.c and such drivers) appears to be ide_pci_check_simplex() which is only called for such controllers... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-06ide: don't set hwif->dma_ops in init_dma() methodSergei Shtylyov1-2/+1
Replace setting of 'hwif->dma_ops' in the 'alim15x3' and 'palm_bk3710' drivers' init_dma() methods with initializing the corresponding member of their 'struct ide_port_info' instances and remove such setting from the 'hpt366' driver that just doesn't use 'sff_dma_ops'. Along with some code save, this prepares us for the next patch... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-06ide: remove HWIF() macroBartlomiej Zolnierkiewicz1-2/+2
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-06ide: merge ide_hwgroup_t with ide_hwif_t (v2)Bartlomiej Zolnierkiewicz1-1/+1
* Merge ide_hwgroup_t with ide_hwif_t. * Cleanup init_irq() accordingly, then remove no longer needed ide_remove_port_from_hwgroup() and ide_ports[]. * Remove now unused HWGROUP() macro. While at it: * ide_dump_ata_error() fixups v2: * Fix ->quirk_list check in do_ide_request() (s/hwif->cur_dev/prev_port->cur_dev). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-12-02alim15x3: fix sparse warningHannes Eder1-1/+1
Fix this sparse warning: drivers/ide/alim15x3.c:594:2: warning: returning void-valued expression Signed-off-by: Hannes Eder <hannes@hanneseder.net> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-11-02ide: Switch to a common addressAlan Cox1-1/+1
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-21ide: remove useless subdirs from drivers/ide/Bartlomiej Zolnierkiewicz1-0/+602
Suggested-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>